Date: 20200428-09:53:09
Serial Number: Q15BB14276
NAS IP: 10.24.53.135
MAC: 00:08:9B:EC:75:C7
Model: TS-231
Firmware: 4.3.6_20200214
Execute Test: N/A
Test Status: N/A
Test Description: N/A
Error Log Count: 114
Segfault: 0
MD9 FS Error: 0
MD0 Status: active
Kernel: Linux version 3.2.26 
CPU: ARMv7 Processor rev 1 (v7l)

[ KERNEL LOG ]
[ EVENT LOG ]
[ CONNECTION LOG ]
[ STORAGE V2 ]
[ DEVICE MAPPER ]
[ FILESYSTEM INFO ]
[ QCLI_STORAGE INFO ]
[ VOLUME INFO ]
[ PROCESS INFO ]
[ RAID SUPERBLOCK INFO ]
[ MD CHECKER ]
[ IFCONFIG ]
[ ROUTING TABLE ]
[ MODULE/IRQ INFO ]
[ MEMORY INFO ]
[ BLOCK DEVICE PARTITION ]
[ MD STATUS ]
[ CONFIGURATION - uLinux.conf ]
[ CONFIGURATION - smb.conf ]
[ CONFIGURATION - volume.conf ]
[ CONFIGURATION - ssdcache.conf ]
[ CONFIGURATION - qdm.conf ]
[ CONFIGURATION - qlvm.conf ]
[ CONFIGURATION - raid.conf ]
[ CONFIGURATION - enclosure_X.conf ]
[ CONFIGURATION - lvm_conf ]
[ CONFIGURATION - ha_conf ]
[ CONFIGURATION - qsnapshot_conf ]
[ CONFIGURATION - qsnapsync_conf ]
[ CONFIGURATION - iscsi_conf ]
[ CONFIGURATION - HDA_ROOT/.conf ]
[ CONFIGURATION - HDA_ROOT/.config/ ]
[ CONFIGURATION - qpkg.conf ]
[ crontab ]
[ netmgr ]
[ vswitch ]
[ nat ]
[ if_dhcpd ]
[ DEVICE MAP ]
[ PCI DEVICE ]
[ USB DEVICE ]
[ Bridge interface list ]
[ nm ]
[ nm_nat ]
[ nm_dhcpd ]
[nm_curr]
[staticroute]
[ext_if]
[dhclient]
[ext_if]
[staticroute6]
[dhclient6]
[if_radvd]
[radvd]
[dhcp]
[ SSD CACHE ]
[ STORAGE LOG ]
[ HAL LOG ]
[ iSCSI LOG ]
[ SDMD LOG ]
[ FORCE_KILL_IN_SHUTDOWN LOG ]
[ LOG - .qid.log ]
[ LOG - .porter.log ]
[ LOG - .player.log ]
[ LOG - netmgr.log ]
[ LOG - netmgr_event_log ]
[ LOG - udev.log ]
[ LOG - /var/log/network ]
[ LOG - /tmp/smart ]
[ LOG - /tmp/em ]
[ LOG - /tmp/usbdebug ]
[ LOG - vm_log ]
[ hal_app --se_enum ]
[ ip ro ]
[ ip ru ]
[ ip li ]
[ route table ]
[ ip -6 ro ]
[ ip -6 ru ]
[ ip -6 li ]
[ route table ip -6 ]
[ pstore log ]
[ QVPN qbelt_log ]
[ /sys/class/scsi_generic/sg ]
[ qnapups@localhost ]
[ hal_app --se_sys_scan ]
[ dmidecode -s bios-version ]
[ hal_app --get_ec_version ]
[ iwlist wlan0 scan ]
[ QLICENSE LOG ]
[ SSL Log ]
[ CloudLink Log ]


============= [ KERNEL LOG ]  [ TOP ]


<b> /etc/init.d/klogd.sh dump </b>
[Diagnostic] Sun Feb 9 15:51:12 GMT 2020, 1584.97
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000185] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060216] Mount-cache hash table entries: 512
<6>[    0.060720] Initializing cgroup subsys cpuacct
<6>[    0.060748] Initializing cgroup subsys devices
<6>[    0.060783] CPU: Testing write buffer coherency: ok
<6>[    0.060944] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060969] Calibrating local timer... 299.82MHz.
<4>[    0.120059]  Creating cpu1_hotplug_thread....
<4>[    0.120147]  cpu1_hotplug_thread Created
<6>[    0.120163] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121561] CPU1: Booted secondary processor
<6>[    0.180027] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180077] Brought up 2 CPUs
<6>[    0.180090] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180770] devtmpfs: initialized
<6>[    0.182184] xor: measuring software checksum speed
<6>[    0.229967]    arm4regs  :  2128.800 MB/sec
<6>[    0.279936]    8regs     :  1438.000 MB/sec
<6>[    0.329905]    32regs    :  1409.600 MB/sec
<6>[    0.329912] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330119] NET: Registered protocol family 16
<6>[    0.330604] L310 cache controller enabled
<6>[    0.330617] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330696] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330701] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330714] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330722] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331225] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331233] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331248] Power Management Mode Support For C2000: 
<6>[    0.331559] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.344550] PCIe0: Link Up Success 
<6>[    0.344557] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.344562] comcerto_pcie_rc_int_init
<6>[    0.344603] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.337557] PCIe1: Link Up Failed 
<7>[    4.337701] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.337761] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.337776] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.337895] PCI: bus0: Fast back to back transfers disabled
<6>[    4.337992] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338003] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338015] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349411] bio: create slab <bio-0> at 0
<4>[    4.519080] raid6: int32x1     25 MB/s
<4>[    4.688451] raid6: int32x2     48 MB/s
<4>[    4.857904] raid6: int32x4     82 MB/s
<4>[    5.027687] raid6: int32x8    113 MB/s
<4>[    5.027692] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.027878] vgaarb: loaded
<5>[    5.028182] SCSI subsystem initialized
<7>[    5.028312] libata version 3.00 loaded.
<6>[    5.028472] usbcore: registered new interface driver usbfs
<6>[    5.028551] usbcore: registered new interface driver hub
<6>[    5.028637] usbcore: registered new device driver usb
<6>[    5.028863] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029287] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.029665] Switching to clocksource timer2
<5>[    5.029893] FS-Cache: Loaded
<6>[    5.030018] CacheFiles: Loaded
<6>[    5.030894] NET: Registered protocol family 2
<6>[    5.031088] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.031744] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.031926] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032084] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032090] TCP reno registered
<6>[    5.032099] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032128] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032373] NET: Registered protocol family 1
<6>[    5.032662] RPC: Registered named UNIX socket transport module.
<6>[    5.032670] RPC: Registered udp transport module.
<6>[    5.032676] RPC: Registered tcp transport module.
<6>[    5.032681] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.032703] PCI: CLS 32 bytes, default 32
<6>[    6.072450] membuf_init: created membuf device(253, 0)
<6>[    6.072741] audit: initializing netlink socket (disabled)
<5>[    6.072764] type=2000 audit(6.070:1): initialized
<5>[    6.073744] VFS: Disk quotas dquot_6.5.2
<4>[    6.073886] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074509] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074771] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075466] fuse init (API version 7.17)
<6>[    6.075659] msgmni has been set to 932
<6>[    6.077339] async_tx: api initialized (async)
<6>[    6.077460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077470] io scheduler noop registered
<6>[    6.077475] io scheduler deadline registered
<6>[    6.077553] io scheduler cfq registered (default)
<6>[    6.077849] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.078197] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.374351] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.024929] console [ttyS0] enabled
<6>[    7.134314] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231079] brd: module loaded
<6>[    7.320546] loop: module loaded
<6>[    7.325072] nbd: registered device at major 43
<6>[    7.334799] SCSI Media Changer driver v0.25 
<7>[    7.339186] ahci 0000:00:00.0: version 3.0
<4>[    7.339205] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.344961] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.351990] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.357526] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.365652] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.374713] scsi0 : ahci
<6>[    7.377628] scsi1 : ahci
<6>[    7.380353] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.387686] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395154] SATA Serdes: 48Mhz ref clk
<6>[    7.399399] Serdes2: Lane OK Passed
<4>[    7.402916] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.407602] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415377] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.423955] scsi2 : ahci_platform
<6>[    7.427497] scsi3 : ahci_platform
<6>[    7.430983] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.438925] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.447790] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457159] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465058] Fixed MDIO Bus: probed
<6>[    7.468520] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.672709] Core Release: 2.81a
<4>[    7.675859] Setting default values for core params
<6>[    7.789706] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.795160] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.880447] Using Buffer DMA mode
<4>[    7.883772] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.889619] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895212] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.899610] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904414] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904429] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904442] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.911541] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.916929] Init: Port Power? op_state=1
<4>[    7.920870] Init: Power Port (0)
<7>[    7.924137] usb usb1: default language 0x0409
<7>[    7.924155] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.930981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938223] usb usb1: Product: DWC OTG Controller
<6>[    7.939720] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.949154] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.954499] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.958887] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.965711] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.973296] usb usb1: usb_probe_device
<7>[    7.973305] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.973330] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.973419] hub 1-0:1.0: usb_probe_interface
<7>[    7.973426] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.973432] hub 1-0:1.0: USB hub found
<6>[    7.973646] ata1.00: configured for UDMA/133
<6>[    7.981500] hub 1-0:1.0: 1 port detected
<7>[    7.985432] hub 1-0:1.0: standalone hub
<7>[    7.985438] hub 1-0:1.0: ganged power switching
<7>[    7.985443] hub 1-0:1.0: individual port over-current protection
<7>[    7.985449] hub 1-0:1.0: Single TT
<7>[    7.985455] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.985462] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.985475] hub 1-0:1.0: local power source is good
<7>[    7.985482] hub 1-0:1.0: enabling power on all ports
<7>[    7.985867] drivers/usb/core/inode.c: creating file '001'
<5>[    7.985973] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<7>[    7.985994] Module dwc_common_port init
<6>[    7.994109] ata1.00: set queue depth = 31
<4>[    7.998300] Check proc_name[ahci].
<5>[    8.002039] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    8.002044] mousedev: PS/2 mouse device common for all mice
<5>[    8.002102] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.002109] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.002312] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.002321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.002384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.040230] i2c /dev entries driver
<4>[    8.043837] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.051716] comcerto_wdt: support registered
<6>[    8.056029] md: linear personality registered for level -1
<6>[    8.061611] md: raid0 personality registered for level 0
<6>[    8.061671]  sda: unknown partition table
<6>[    8.070974] md: raid1 personality registered for level 1
<5>[    8.071493] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.080931] md: raid10 personality registered for level 10
<6>[    8.086431] md: raid6 personality registered for level 6
<4>[    8.089710] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.089714] 
<7>[    8.089741] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.100227] md: raid5 personality registered for level 5
<6>[    8.105552] md: raid4 personality registered for level 4
<6>[    8.110883] md: multipath personality registered for level -4
<6>[    8.117032] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.125566] dm_crypt using the OCF for crypto acceleration.
<6>[    8.131367] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.136871] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.143431] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.150071] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.160610] ALSA device list:
<6>[    8.163588]   No soundcards found.
<6>[    8.167625] TCP cubic registered
<6>[    8.170885] NET: Registered protocol family 17
<6>[    8.175369] NET: Registered protocol family 15
<6>[    8.179834] Initializing NETLINK_KEY socket
<6>[    8.184038] NET: Registered protocol family 5
<6>[    8.188493] lib80211: common routines for IEEE802.11 drivers
<7>[    8.194181] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.194187] Registering the dns_resolver key type
<6>[    8.198937] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.206645] Clocks: disabled unused pll2
<6>[    8.210584] Clocks: disabled unused uart
<6>[    8.214516] Clocks: disabled unused gemtx
<6>[    8.218535] Clocks: disabled unused ipsec_spacc
<6>[    8.223081] Clocks: disabled unused dpi_cie
<6>[    8.227274] Clocks: disabled unused dpi_decomp
<6>[    8.231735] Clocks: disabled unused ntgref
<6>[    8.235841] Clocks: disabled unused pcie1
<6>[    8.239867] Clocks: disabled unused usb1
<6>[    8.243799] Clocks: disabled unused ext_phy0
<6>[    8.248079] Clocks: disabled unused ext_phy1
<6>[    8.252364] Clocks: disabled unused ext_phy2
<6>[    8.256643] Clocks: disabled unused tpi
<6>[    8.260493] Clocks: disabled unused csys
<6>[    8.264425] Clocks: disabled unused tsuntg
<6>[    8.268531] Clocks: disabled unused sata_occ
<6>[    8.272819] Clocks: disabled unused pcie_occ
<6>[    8.277100] Clocks: disabled unused sgmii_occ
<7>[    8.289743] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.289762] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.289766] 
<7>[    8.298250] hub 1-0:1.0: over-current change on port 1
<7>[    8.399720] hub 1-0:1.0: enabling power on all ports
<4>[    8.474126] Registering CPUFreq(comcerto)
<4>[    8.478426] Please be patient, while OpenWrt loads ...
<6>[    8.589720] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.596542] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.603365] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.611279] ata2.00: configured for UDMA/133
<5>[    8.615945] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.624087] ata2.00: set queue depth = 31
<4>[    8.628307] Check proc_name[ahci].
<5>[    8.631937] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.639807] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.645166] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.645293] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.645301] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.645365] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.656027]  sdb: unknown partition table
<5>[    8.668991] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.691166] Freeing init memory: 13476K
<6>[    9.202387] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.209120] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.469056] RTC_TIME:Sun Feb  9 16:23:09 2020  0.000000 seconds
<6>[    9.499759] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.504410] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.510366] Creating 2 MTD partitions on "spi0.0":
<5>[    9.515174] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.520902] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.531201] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.538287] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.543491] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.552135] Using default values for hw ecc
<4>[    9.559759] Bad block table not found for chip 0
<4>[    9.567758] Bad block table not found for chip 0
<6>[    9.572395] Scanning device for bad blocks
<4>[    9.577537] Bad eraseblock 18 at 0x000000240000
<4>[    9.585017] Bad eraseblock 72 at 0x000000900000
<4>[    9.604650] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.610962] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.641761] Bad eraseblock 863 at 0x000006be0000
<4>[    9.667355] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.687071] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.834553] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.844126] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.850442] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.856900] Creating 5 MTD partitions on "comcertonand":
<5>[    9.862236] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.868505] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.874872] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.881073] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.887393] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.900367] usbcore: registered new interface driver usbhid
<6>[    9.905958] usbhid: USB HID core driver
<6>[    9.915498] usbcore: registered new interface driver usblp
<6>[    9.928123] ## xhci_plat_probe
<6>[    9.931237] ### comcerto_start_xhci
<6>[    9.934745] USB3.0 clock selected: internal
<6>[    9.942192] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.947102] drivers/usb/core/inode.c: creating file '002'
<6>[    9.947124] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.954347] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.959729] usb usb2: default language 0x0409
<7>[    9.959747] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.959754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.966561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.973813] usb usb2: Product: xHCI Host Controller
<6>[    9.978704] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.984122] usb usb2: SerialNumber: xhci-hcd
<7>[    9.988697] usb usb2: usb_probe_device
<7>[    9.988706] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.988717] xHCI xhci_add_endpoint called for root hub
<7>[    9.988723] xHCI xhci_check_bandwidth called for root hub
<7>[    9.988743] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.988851] hub 2-0:1.0: usb_probe_interface
<7>[    9.988857] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.988864] hub 2-0:1.0: USB hub found
<6>[    9.992659] hub 2-0:1.0: 1 port detected
<7>[    9.996593] hub 2-0:1.0: standalone hub
<7>[    9.996599] hub 2-0:1.0: no power switching (usb 1.0)
<7>[    9.996604] hub 2-0:1.0: individual port over-current protection
<7>[    9.996610] hub 2-0:1.0: Single TT
<7>[    9.996617] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    9.996624] hub 2-0:1.0: power on to power good time: 20ms
<7>[    9.996637] hub 2-0:1.0: local power source is good
<7>[    9.996644] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[    9.996787] drivers/usb/core/inode.c: creating file '001'
<6>[    9.996862] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.001795] drivers/usb/core/inode.c: creating file '003'
<6>[   10.001810] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.008924] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.008936] usb usb3: default language 0x0409
<7>[   10.008952] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.008959] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.015790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.023041] usb usb3: Product: xHCI Host Controller
<6>[   10.027931] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.033349] usb usb3: SerialNumber: xhci-hcd
<7>[   10.037857] usb usb3: usb_probe_device
<7>[   10.037866] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.037875] xHCI xhci_add_endpoint called for root hub
<7>[   10.037881] xHCI xhci_check_bandwidth called for root hub
<7>[   10.037898] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.037988] hub 3-0:1.0: usb_probe_interface
<7>[   10.037995] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.038001] hub 3-0:1.0: USB hub found
<6>[   10.041798] hub 3-0:1.0: 1 port detected
<7>[   10.045731] hub 3-0:1.0: standalone hub
<7>[   10.045736] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.045742] hub 3-0:1.0: individual port over-current protection
<7>[   10.045749] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.045756] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.045769] hub 3-0:1.0: local power source is good
<7>[   10.045775] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.045920] drivers/usb/core/inode.c: creating file '001'
<6>[   10.053382] Initializing USB Mass Storage driver...
<6>[   10.058387] usbcore: registered new interface driver usb-storage
<6>[   10.064424] USB Mass Storage support registered.
<7>[   10.089751] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.139769] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.189898] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.189943] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.309754] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.331902] usb 2-1: default language 0x0409
<7>[   10.332443] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.332454] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.339184] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.346375] usb 2-1: Product: USB2.0 Hub
<6>[   10.350340] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.355238] usb 2-1: usb_probe_device
<7>[   10.355251] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.361017] usb 2-1: Successful Endpoint Configure command
<7>[   10.361271] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.361402] hub 2-1:1.0: usb_probe_interface
<7>[   10.361411] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.361418] hub 2-1:1.0: USB hub found
<6>[   10.365448] hub 2-1:1.0: 4 ports detected
<7>[   10.369486] hub 2-1:1.0: standalone hub
<7>[   10.369494] hub 2-1:1.0: individual port power switching
<7>[   10.369500] hub 2-1:1.0: individual port over-current protection
<7>[   10.392943] usb 2-1: Successful Endpoint Configure command
<7>[   10.393250] hub 2-1:1.0: TT per port
<7>[   10.393258] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.393264] hub 2-1:1.0: Port indicators are supported
<7>[   10.393273] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.393640] usb 2-1: Successful Endpoint Configure command
<7>[   10.393852] hub 2-1:1.0: local power source is good
<7>[   10.393863] hub 2-1:1.0: enabling power on all ports
<7>[   10.394751] drivers/usb/core/inode.c: creating file '002'
<7>[   10.394848] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.394873] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.449899] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.456285] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.490379] hub 2-1:1.0: port 3: status 0301 change 0001
<4>[   10.497798] flashcache: flashcache-1.0-dummy initialized
<6>[   10.509887] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.531673] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.531850] usb 3-1: default language 0x0409
<7>[   10.532386] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.532394] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.539118] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.546296] usb 3-1: Product: USB3.0 Hub
<6>[   10.550238] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.555029] usb 3-1: usb_probe_device
<7>[   10.555039] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.568899] usb 3-1: Successful Endpoint Configure command
<7>[   10.569077] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.569465] hub 3-1:1.0: usb_probe_interface
<7>[   10.569473] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.569480] hub 3-1:1.0: USB hub found
<6>[   10.573543] hub 3-1:1.0: 4 ports detected
<7>[   10.577566] hub 3-1:1.0: standalone hub
<7>[   10.577571] hub 3-1:1.0: individual port power switching
<7>[   10.577577] hub 3-1:1.0: individual port over-current protection
<7>[   10.577585] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.577592] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.577775] usb 3-1: Successful Endpoint Configure command
<7>[   10.577919] hub 3-1:1.0: local power source is good
<7>[   10.578033] hub 3-1:1.0: enabling power on all ports
<7>[   10.578773] drivers/usb/core/inode.c: creating file '002'
<7>[   10.589744] hub 2-1:1.0: state 7 ports 4 chg 0008 evt 0000
<7>[   10.589922] hub 2-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
<5>[   10.667570] UBI: attaching mtd3 to ubi0
<6>[   10.670015] usb 2-1.3: new low-speed USB device number 3 using xhci-hcd
<5>[   10.678067] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.684357] UBI: logical eraseblock size:    126976 bytes
<5>[   10.689778] UBI: smallest flash I/O unit:    2048
<7>[   10.693782] usb 2-1.3: skipped 1 descriptor after interface
<7>[   10.694420] usb 2-1.3: default language 0x0409
<5>[   10.694495] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.700522] UBI: data offset:                4096
<7>[   10.701376] usb 2-1.3: udev 3, busnum 2, minor = 130
<6>[   10.701383] usb 2-1.3: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.701390] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.701397] usb 2-1.3: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.701403] usb 2-1.3: Manufacturer: American Power Conversion
<6>[   10.701408] usb 2-1.3: SerialNumber: 3B1524X23300  
<7>[   10.737449] usb 2-1.3: usb_probe_device
<7>[   10.737461] usb 2-1.3: configuration #1 chosen from 1 choice
<4>[   10.737526] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.776896] usb 2-1.3: Successful Endpoint Configure command
<7>[   10.777587] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
<7>[   10.777704] usbhid 2-1.3:1.0: usb_probe_interface
<7>[   10.777713] usbhid 2-1.3:1.0: usb_probe_interface - got id
<7>[   11.104648] usbhid 2-1.3:1.0: looking for a minor, starting at 96
<6>[   11.104819] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.3/input0
<7>[   11.120572] drivers/usb/core/inode.c: creating file '003'
<7>[   11.120651] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.212887] UBI: max. sequence number:       2
<5>[   12.229666] UBI: attached mtd3 to ubi0
<5>[   12.233456] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.239130] UBI: MTD device size:            216 MiB
<5>[   12.244114] UBI: number of good PEBs:        1723
<5>[   12.248829] UBI: number of bad PEBs:         5
<5>[   12.253290] UBI: number of corrupted PEBs:   0
<5>[   12.257744] UBI: max. allowed volumes:       128
<5>[   12.262376] UBI: wear-leveling threshold:    4096
<5>[   12.267091] UBI: number of internal volumes: 1
<5>[   12.271550] UBI: number of user volumes:     1
<5>[   12.276004] UBI: available PEBs:             0
<5>[   12.280463] UBI: total number of reserved PEBs: 1723
<5>[   12.285439] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.291551] UBI: max/mean erase counter: 22/14
<5>[   12.296005] UBI: image sequence number:  1535285440
<5>[   12.300912] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.417083] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.423209] UBIFS: mounted read-only
<5>[   12.426796] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.434837] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.442173] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.448021] UBIFS: default compressor: lzo
<5>[   12.452132] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.823867] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.888783] UBI: mtd3 is detached from ubi0
<6>[   33.901754] usbcore: registered new interface driver usbserial
<6>[   33.907606] usbserial: USB Serial Driver core
<6>[   33.917512] USB Serial support registered for pl2303
<6>[   33.922608] usbcore: registered new interface driver pl2303
<6>[   33.928196] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.940116] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.953810] ufsd: module license 'Commercial product' taints kernel.
<4>[   33.960209] Disabling lock debugging due to kernel taint
<5>[   33.986669] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   33.986675] NTFSJ support included
<5>[   33.986677] exFAT support included
<5>[   33.986679] Hfs+J support included
<5>[   33.986681] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.013924] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.018381] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.288466] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.297841] udev: starting version 140
<6>[   34.304639] pfe_module_init
<6>[   34.307493] pfe_platform_probe
<6>[   34.311602] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.317415] pfe_probe
<6>[   34.319706] PFE Driver version:
<6>[   34.319708] pfe_ctrl_10_00_4
<6>[   34.319710] built with pfe sources version: pfe_10_00_3
<6>[   34.330980] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.340578] pfe_hw_init
<6>[   34.343030] CLASS version: 20
<6>[   34.346003] TMU version: 1011231
<6>[   34.349238] BMU1 version: 21
<6>[   34.352128] BMU2 version: 21
<6>[   34.355014] EMAC1 network cfg: 80000
<6>[   34.358597] EMAC2 network cfg: 80000
<6>[   34.362183] EMAC3 network cfg: 80000
<6>[   34.365766] EGPI1 version: 50
<6>[   34.368740] EGPI2 version: 50
<6>[   34.371718] EGPI3 version: 50
<6>[   34.374691] HGPI version: 50
<6>[   34.377578] GPT version: 0
<6>[   34.380294] HIF version: 10
<6>[   34.383093] HIF NOPCY version: 10
<6>[   34.386415] UTIL version: 20
<6>[   34.389302] bmu_init(1) done
<6>[   34.392193] bmu_init(2) done
<6>[   34.401539] class_init() done
<6>[   34.404517] tmu_init: mem init
<6>[   34.407578] tmu_init: lmem init
<6>[   34.410775] tmu_init() done
<6>[   34.413574] util_init() done
<6>[   34.416462] gpi_init(1) done
<6>[   34.419350] gpi_init(2) done
<6>[   34.422243] gpi_init(3) done
<6>[   34.425131] gpi_init(hif) done
<6>[   34.428192] bmu_enable(1) done
<6>[   34.431256] bmu_enable(2) done
<6>[   34.434318] pfe_hif_lib_init
<6>[   34.437378] pfe_hif_init
<6>[   34.439924] pfe_hif_alloc_descr
<6>[   34.443172] pfe_hif_init_buffers
<6>[   34.446529] pfe_firmware_init
<6>[   34.608827] pfe_load_elf
<3>[   34.611440] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.642936] PFE binary version: pfe_10_00_3
<6>[   34.647136] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.653603] pfe_load_elf
<6>[   34.657518] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.662850] pfe_load_elf
<6>[   34.667166] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.672718] pfe_ctrl_init
<6>[   34.693454] pfe_ctrl_init finished
<6>[   34.693460] pfe_ctrl_timer
<6>[   34.699580] pfe_eth_init
<6>[   34.710895] Comcerto MDIO Bus: probed
<6>[   34.715833] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.724401] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.731274] pfe_vwd_init
<6>[   34.734021] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.739007] pfe_vwd_driver_init: start
<4>[   34.742804] pfe_vwd_up: start
<6>[   34.745828] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.752909] pfe_vwd_driver_init: end
<6>[   34.756495] pfe_pcap_init
<6>[   34.798722] eth0: pfe_eth_open
<6>[   34.801988] hif_process_client_req: register client_id 0
<6>[   34.807320] pfe_hif_client_register
<6>[   34.810853] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.819148] eth0: pfe_gemac_init
<6>[   34.826238] eth0: pfe_eth_close
<6>[   34.859732] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.869154] hif_process_client_req: unregister client_id 0
<6>[   34.874662] pfe_hif_client_unregister
<6>[   34.878889] eth1: pfe_eth_open
<6>[   34.882102] hif_process_client_req: register client_id 1
<6>[   34.887428] pfe_hif_client_register
<6>[   34.890945] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.899233] eth1: pfe_gemac_init
<6>[   34.903111] eth1: pfe_eth_close
<6>[   34.939698] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.949118] hif_process_client_req: unregister client_id 1
<6>[   34.954622] pfe_hif_client_unregister
<4>[   39.321788] set stripe cache size 1024
<4>[   39.326136] STRIPE_CACHE_SIZE is 1024
<6>[   54.510377] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<3>[   55.658061] FAT-fs (mtdblock3): bogus number of FAT structure
<6>[   55.663869] FAT-fs (mtdblock3): Can't find a valid FAT filesystem
<3>[   55.730034] FAT-fs (mtdblock3): bogus number of FAT structure
<6>[   55.735803] FAT-fs (mtdblock3): Can't find a valid FAT filesystem
<6>[   57.094963] sysinfo: Module loaded.
<6>[   57.275759] fnotify: Load file notify kernel module.
<6>[   58.469311] usbcore: registered new interface driver snd-usb-audio
<6>[   58.481334] usbcore: registered new interface driver snd-usb-caiaq
<6>[   58.501679] Linux video capture interface: v2.00
<6>[   58.520747] usbcore: registered new interface driver uvcvideo
<6>[   58.526516] USB Video Class driver (1.1.1)
<6>[   58.722697] NET: Registered protocol family 10
<6>[   62.232542] eth0: pfe_eth_open
<6>[   62.235742] hif_process_client_req: register client_id 1
<6>[   62.241088] pfe_hif_client_register
<6>[   62.244592] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   62.252890] eth0: pfe_gemac_init
<6>[   62.256698] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[   62.863639] eth1: pfe_eth_open
<6>[   62.866840] hif_process_client_req: register client_id 0
<6>[   62.872180] pfe_hif_client_register
<6>[   62.875691] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   62.884010] eth1: pfe_gemac_init
<6>[   62.887822] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[   65.249923] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[   65.255368] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[   76.819698] eth0: no IPv6 routers present
<5>[   87.666589] Bridge firewalling registered
<6>[   88.217704] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[   88.224911] bonding: MII link monitoring set to 100 ms
<6>[   95.931269] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  146.268603] ====== 2020-02-09 16:25:25 TS-231 (4.3.6.1154-20191212) boot finished.
<6>[ 1458.484756] md: bind<sda1>
<6>[ 1458.499596] md: bind<sdb1>
<6>[ 1458.505355] bio: create slab <bio-1> at 1
<6>[ 1458.509571] md/raid1:md9: active with 2 out of 32 mirrors
<6>[ 1458.515182] created bitmap (1 pages) for device md9
<6>[ 1458.520311] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[ 1458.544304] md9: detected capacity change from 0 to 542769152
<6>[ 1458.629550]  md9: unknown partition table
<6>[ 1459.129116] kjournald starting.  Commit interval 5 seconds
<6>[ 1459.135080] EXT3-fs (md9): using internal journal
<6>[ 1459.139846] EXT3-fs (md9): mounted filesystem with ordered data mode
<5>[ 1469.715080] UBI: attaching mtd6 to ubi2
<5>[ 1469.718933] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 1469.725245] UBI: logical eraseblock size:    126976 bytes
<5>[ 1469.730672] UBI: smallest flash I/O unit:    2048
<5>[ 1469.735395] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 1469.741432] UBI: data offset:                4096
<5>[ 1469.850450] UBI: max. sequence number:       201
<5>[ 1469.866119] UBI: attached mtd6 to ubi2
<5>[ 1469.869915] UBI: MTD device name:            "config"
<5>[ 1469.874989] UBI: MTD device size:            15 MiB
<5>[ 1469.879972] UBI: number of good PEBs:        120
<5>[ 1469.884607] UBI: number of bad PEBs:         0
<5>[ 1469.889062] UBI: number of corrupted PEBs:   0
<5>[ 1469.893534] UBI: max. allowed volumes:       128
<5>[ 1469.898162] UBI: wear-leveling threshold:    4096
<5>[ 1469.902889] UBI: number of internal volumes: 1
<5>[ 1469.907344] UBI: number of user volumes:     1
<5>[ 1469.911807] UBI: available PEBs:             0
<5>[ 1469.916262] UBI: total number of reserved PEBs: 120
<5>[ 1469.921158] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 1469.927179] UBI: max/mean erase counter: 3/2
<5>[ 1469.931467] UBI: image sequence number:  1872325126
<5>[ 1469.936368] UBI: background thread "ubi_bgt2d" started, PID 11449
<5>[ 1470.061737] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 1470.067766] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 1470.075395] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 1470.082735] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1470.088583] UBIFS: default compressor: lzo
<5>[ 1470.092694] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 1470.115030] UBIFS: un-mount UBI device 2, volume 0
<6>[ 1494.385903] md: requested-resync of RAID array md9
<6>[ 1494.390757] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[ 1494.396606] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync.
<6>[ 1494.406935] md: Resyncing started: md9
<6>[ 1494.410729] md: using 128k window, over a total of 530048k.
<6>[ 1497.052780] md: bind<sda4>
<6>[ 1497.055741] md: bind<sdb4>
<6>[ 1497.061695] md/raid1:md13: active with 2 out of 32 mirrors
<6>[ 1497.067389] created bitmap (1 pages) for device md13
<6>[ 1497.072624] md13: bitmap initialized from disk: read 1/1 pages, set 8 of 8 bits
<6>[ 1497.097950] md13: detected capacity change from 0 to 469893120
<5>[ 1497.164392] UBI: attaching mtd3 to ubi0
<5>[ 1497.168244] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 1497.174580] UBI: logical eraseblock size:    126976 bytes
<5>[ 1497.180024] UBI: smallest flash I/O unit:    2048
<5>[ 1497.184742] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 1497.190780] UBI: data offset:                4096
<5>[ 1498.741779] UBI: max. sequence number:       2
<5>[ 1498.760449] UBI: attached mtd3 to ubi0
<5>[ 1498.764213] UBI: MTD device name:            "boot1_rootfs2"
<5>[ 1498.769920] UBI: MTD device size:            216 MiB
<5>[ 1498.774910] UBI: number of good PEBs:        1723
<5>[ 1498.779627] UBI: number of bad PEBs:         5
<5>[ 1498.784093] UBI: number of corrupted PEBs:   0
<5>[ 1498.788547] UBI: max. allowed volumes:       128
<5>[ 1498.793183] UBI: wear-leveling threshold:    4096
<5>[ 1498.797902] UBI: number of internal volumes: 1
<5>[ 1498.802362] UBI: number of user volumes:     1
<5>[ 1498.806816] UBI: available PEBs:             0
<5>[ 1498.811275] UBI: total number of reserved PEBs: 1723
<5>[ 1498.816252] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[ 1498.822367] UBI: max/mean erase counter: 22/14
<5>[ 1498.826821] UBI: image sequence number:  1535285440
<5>[ 1498.832309] UBI: background thread "ubi_bgt0d" started, PID 11694
<5>[ 1498.981306] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[ 1498.988288] UBIFS: mounted read-only
<5>[ 1498.991901] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[ 1499.000872] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[ 1499.008203] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1499.014090] UBIFS: default compressor: lzo
<5>[ 1499.018200] UBIFS: reserved for root:  0 bytes (0 KiB)
<6>[ 1499.097535]  md13: unknown partition table
<5>[ 1523.433889] UBIFS: un-mount UBI device 0, volume 0
<5>[ 1523.486796] UBI: mtd3 is detached from ubi0
<6>[ 1523.928410] kjournald starting.  Commit interval 5 seconds
<6>[ 1524.125003] EXT3-fs (md13): using internal journal
<6>[ 1524.129835] EXT3-fs (md13): mounted filesystem with ordered data mode
<6>[ 1525.162716] md: requested-resync of RAID array md13
<6>[ 1525.167616] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[ 1525.173498] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync.
<6>[ 1525.183809] md: Resyncing started: md13
<6>[ 1525.187668] md: using 128k window, over a total of 458880k.
<6>[ 1528.468936] md: bind<sda2>
<6>[ 1528.475379] md/raid1:md256: active with 1 out of 2 mirrors
<6>[ 1528.481106] created bitmap (1 pages) for device md256
<6>[ 1528.486372] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[ 1528.513629] md256: detected capacity change from 0 to 542834688
<6>[ 1528.591338]  md256: unknown partition table
<6>[ 1528.659867] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[ 1529.478768] md: bind<sda5>
<6>[ 1529.611330] md/raid1:md322: active with 1 out of 2 mirrors
<6>[ 1529.656067] created bitmap (1 pages) for device md322
<6>[ 1529.722742] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[ 1529.890743] md322: detected capacity change from 0 to 7408779264
<6>[ 1530.410768]  md322: unknown partition table
<6>[ 1531.068682] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[ 1531.535273] md: bind<sdb2>
<7>[ 1531.817055] RAID1 conf printout:
<7>[ 1531.817072]  --- wd:1 rd:2
<7>[ 1531.817080]  disk 0, wo:0, o:1, dev:sda2
<7>[ 1531.817087]  disk 1, wo:1, o:1, dev:sdb2
<6>[ 1531.820609] md: recovery of RAID array md256
<6>[ 1531.824970] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[ 1531.830880] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
<6>[ 1531.840536] md: Recovering started: md256
<6>[ 1531.844623] md: using 128k window, over a total of 530112k.
<6>[ 1533.709094] md: bind<sdb5>
<7>[ 1533.901016] RAID1 conf printout:
<7>[ 1533.901028]  --- wd:1 rd:2
<7>[ 1533.901036]  disk 0, wo:0, o:1, dev:sda5
<7>[ 1533.901042]  disk 1, wo:1, o:1, dev:sdb5
<6>[ 1533.901264] md: recovery of RAID array md322
<6>[ 1533.905560] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[ 1533.911439] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
<6>[ 1533.921058] md: Recovering started: md322
<6>[ 1533.925086] md: using 128k window, over a total of 7235136k.
<6>[ 1589.132760] md: md9: requested-resync done.
<6>[ 1589.136996] md: Resyncing done: md9
<5>[ 1593.318388] UBI: attaching mtd3 to ubi0
<5>[ 1593.322242] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 1593.328561] UBI: logical eraseblock size:    126976 bytes
<5>[ 1593.334002] UBI: smallest flash I/O unit:    2048
<5>[ 1593.338719] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 1593.344764] UBI: data offset:                4096
<6>[ 1594.556411] md: md13: requested-resync done.
<6>[ 1594.560700] md: Resyncing done: md13
<5>[ 1594.846896] UBI: max. sequence number:       2
<5>[ 1594.865108] UBI: attached mtd3 to ubi0
<5>[ 1594.868895] UBI: MTD device name:            "boot1_rootfs2"
<5>[ 1594.874592] UBI: MTD device size:            216 MiB
<5>[ 1594.879571] UBI: number of good PEBs:        1723
<5>[ 1594.884296] UBI: number of bad PEBs:         5
<5>[ 1594.888753] UBI: number of corrupted PEBs:   0
<5>[ 1594.893206] UBI: max. allowed volumes:       128
<5>[ 1594.897842] UBI: wear-leveling threshold:    4096
<5>[ 1594.902558] UBI: number of internal volumes: 1
<5>[ 1594.907019] UBI: number of user volumes:     1
<5>[ 1594.911472] UBI: available PEBs:             0
<5>[ 1594.915932] UBI: total number of reserved PEBs: 1723
<5>[ 1594.920909] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[ 1594.927023] UBI: max/mean erase counter: 22/14
<5>[ 1594.931478] UBI: image sequence number:  1535285440
<5>[ 1594.936602] UBI: background thread "ubi_bgt0d" started, PID 12886
<5>[ 1595.065626] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[ 1595.071743] UBIFS: mounted read-only
<5>[ 1595.075350] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[ 1595.083378] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[ 1595.090717] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1595.096574] UBIFS: default compressor: lzo
<5>[ 1595.100681] UBIFS: reserved for root:  0 bytes (0 KiB)
<6>[ 1603.256414] md: md256: recovery done.
<6>[ 1603.260220] md: Recovering done: md256, degraded=1
<7>[ 1603.670140] RAID1 conf printout:
<7>[ 1603.670149]  --- wd:2 rd:2
<7>[ 1603.670156]  disk 0, wo:0, o:1, dev:sda2
<7>[ 1603.670163]  disk 1, wo:0, o:1, dev:sdb2
<5>[ 1627.251587] UBIFS: un-mount UBI device 0, volume 0
<5>[ 1627.324143] UBI: mtd3 is detached from ubi0
<5>[ 1676.605860] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 1676.611890] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 1676.619533] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 1676.626896] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1676.626903] UBIFS: default compressor: lzo
<5>[ 1676.626907] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 1677.003420] UBIFS: un-mount UBI device 2, volume 0
<5>[ 1677.069053] UBI: mtd6 is detached from ubi2
<6>[ 1721.431379] md: md322: recovery done.
<6>[ 1721.435062] md: Recovering done: md322, degraded=1
<7>[ 1721.656518] RAID1 conf printout:
<7>[ 1721.656526]  --- wd:2 rd:2
<7>[ 1721.656533]  disk 0, wo:0, o:1, dev:sda5
<7>[ 1721.656540]  disk 1, wo:0, o:1, dev:sdb5
<6>[ 1848.192443] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[ 1848.284463] eth0: pfe_eth_close
<6>[ 1848.320938] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[ 1848.330360] hif_process_client_req: unregister client_id 1
<6>[ 1848.335872] pfe_hif_client_unregister
<6>[ 1848.406845] eth1: pfe_eth_close
<6>[ 1848.455306] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[ 1848.464779] hif_process_client_req: unregister client_id 0
<6>[ 1848.470281] pfe_hif_client_unregister
<5>[ 1858.629428] UBI: attaching mtd6 to ubi2
<5>[ 1858.633327] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 1858.639618] UBI: logical eraseblock size:    126976 bytes
<5>[ 1858.645045] UBI: smallest flash I/O unit:    2048
<5>[ 1858.649762] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 1858.655793] UBI: data offset:                4096
<5>[ 1858.763743] UBI: max. sequence number:       203
<5>[ 1858.778990] UBI: attached mtd6 to ubi2
<5>[ 1858.782797] UBI: MTD device name:            "config"
<5>[ 1858.787863] UBI: MTD device size:            15 MiB
<5>[ 1858.792764] UBI: number of good PEBs:        120
<5>[ 1858.797393] UBI: number of bad PEBs:         0
<5>[ 1858.801857] UBI: number of corrupted PEBs:   0
<5>[ 1858.806312] UBI: max. allowed volumes:       128
<5>[ 1858.810948] UBI: wear-leveling threshold:    4096
<5>[ 1858.815663] UBI: number of internal volumes: 1
<5>[ 1858.820117] UBI: number of user volumes:     1
<5>[ 1858.824582] UBI: available PEBs:             0
<5>[ 1858.829036] UBI: total number of reserved PEBs: 120
<5>[ 1858.833933] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 1858.839955] UBI: max/mean erase counter: 3/2
<5>[ 1858.844243] UBI: image sequence number:  1872325126
<5>[ 1858.849167] UBI: background thread "ubi_bgt2d" started, PID 19728
<5>[ 1858.968483] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 1858.974540] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 1858.982146] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 1858.989475] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1858.995336] UBIFS: default compressor: lzo
<5>[ 1858.999442] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 1859.419708] UBIFS: un-mount UBI device 2, volume 0
<5>[ 1859.466913] UBI: mtd6 is detached from ubi2
[Diagnostic] Sun Feb 9 16:03:35 GMT 2020, 408.53
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000183] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060030] pid_max: default: 32768 minimum: 301
<6>[    0.060222] Mount-cache hash table entries: 512
<6>[    0.060723] Initializing cgroup subsys cpuacct
<6>[    0.060752] Initializing cgroup subsys devices
<6>[    0.060786] CPU: Testing write buffer coherency: ok
<6>[    0.060948] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060974] Calibrating local timer... 299.86MHz.
<4>[    0.120062]  Creating cpu1_hotplug_thread....
<4>[    0.120151]  cpu1_hotplug_thread Created
<6>[    0.120166] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121565] CPU1: Booted secondary processor
<6>[    0.180038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180089] Brought up 2 CPUs
<6>[    0.180102] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180816] devtmpfs: initialized
<6>[    0.182213] xor: measuring software checksum speed
<6>[    0.229986]    arm4regs  :  2128.800 MB/sec
<6>[    0.279963]    8regs     :  1438.000 MB/sec
<6>[    0.329940]    32regs    :  1409.600 MB/sec
<6>[    0.329947] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330152] NET: Registered protocol family 16
<6>[    0.330641] L310 cache controller enabled
<6>[    0.330654] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330733] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330737] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330750] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330758] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331267] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331275] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331290] Power Management Mode Support For C2000: 
<6>[    0.331603] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.344778] PCIe0: Link Up Success 
<6>[    0.344785] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.344790] comcerto_pcie_rc_int_init
<6>[    0.344831] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338201] PCIe1: Link Up Failed 
<7>[    4.338339] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338400] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338415] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338535] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338632] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338643] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338655] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349994] bio: create slab <bio-0> at 0
<4>[    4.519721] raid6: int32x1     25 MB/s
<4>[    4.689301] raid6: int32x2     48 MB/s
<4>[    4.858632] raid6: int32x4     82 MB/s
<4>[    5.028413] raid6: int32x8    113 MB/s
<4>[    5.028418] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028597] vgaarb: loaded
<5>[    5.028921] SCSI subsystem initialized
<7>[    5.029054] libata version 3.00 loaded.
<6>[    5.029215] usbcore: registered new interface driver usbfs
<6>[    5.029291] usbcore: registered new interface driver hub
<6>[    5.029373] usbcore: registered new device driver usb
<6>[    5.029589] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030009] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030394] Switching to clocksource timer2
<5>[    5.030604] FS-Cache: Loaded
<6>[    5.030747] CacheFiles: Loaded
<6>[    5.031628] NET: Registered protocol family 2
<6>[    5.031821] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032464] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032648] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032806] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032812] TCP reno registered
<6>[    5.032822] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032852] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033101] NET: Registered protocol family 1
<6>[    5.033387] RPC: Registered named UNIX socket transport module.
<6>[    5.033394] RPC: Registered udp transport module.
<6>[    5.033399] RPC: Registered tcp transport module.
<6>[    5.033405] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033426] PCI: CLS 32 bytes, default 32
<6>[    6.072111] membuf_init: created membuf device(253, 0)
<6>[    6.072392] audit: initializing netlink socket (disabled)
<5>[    6.072419] type=2000 audit(6.070:1): initialized
<5>[    6.073348] VFS: Disk quotas dquot_6.5.2
<4>[    6.073488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074089] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074354] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075004] fuse init (API version 7.17)
<6>[    6.075183] msgmni has been set to 932
<6>[    6.076896] async_tx: api initialized (async)
<6>[    6.077005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077015] io scheduler noop registered
<6>[    6.077020] io scheduler deadline registered
<6>[    6.077074] io scheduler cfq registered (default)
<6>[    6.077382] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077730] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.375077] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025664] console [ttyS0] enabled
<6>[    7.135043] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231785] brd: module loaded
<6>[    7.320712] loop: module loaded
<6>[    7.325238] nbd: registered device at major 43
<6>[    7.334958] SCSI Media Changer driver v0.25 
<7>[    7.339346] ahci 0000:00:00.0: version 3.0
<4>[    7.339365] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345123] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352153] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.357690] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.365818] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.374865] scsi0 : ahci
<6>[    7.377771] scsi1 : ahci
<6>[    7.380501] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.387833] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395298] SATA Serdes: 48Mhz ref clk
<6>[    7.399547] Serdes2: Lane OK Passed
<4>[    7.403063] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.407748] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415525] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.424106] scsi2 : ahci_platform
<6>[    7.427646] scsi3 : ahci_platform
<6>[    7.431134] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.439075] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.447932] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457298] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465197] Fixed MDIO Bus: probed
<6>[    7.468661] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.672860] Core Release: 2.81a
<4>[    7.676011] Setting default values for core params
<6>[    7.790437] ata3: SATA link down (SStatus 0 SControl 330)
<6>[    7.795893] ata4: SATA link down (SStatus 0 SControl 330)
<4>[    7.880597] Using Buffer DMA mode
<4>[    7.883921] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.889767] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895360] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.899755] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904559] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904574] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904586] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.911685] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.917073] Init: Port Power? op_state=1
<4>[    7.921013] Init: Power Port (0)
<7>[    7.924279] usb usb1: default language 0x0409
<7>[    7.924297] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938363] usb usb1: Product: DWC OTG Controller
<6>[    7.940445] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.941068] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.941076] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    7.941643] ata1.00: configured for UDMA/133
<5>[    7.942019] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    7.942033] ata1.00: set queue depth = 31
<4>[    7.942212] Check proc_name[ahci].
<5>[    7.942507] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    7.942857] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    7.942864] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    7.943067] sd 0:0:0:0: [sda] Write Protect is off
<7>[    7.943075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    7.943140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    7.991696]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.019580] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<5>[    8.020243] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.029539] usb usb1: SerialNumber: dwc_otg.0
<7>[    8.034194] usb usb1: usb_probe_device
<7>[    8.034204] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.034231] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.034322] hub 1-0:1.0: usb_probe_interface
<7>[    8.034329] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.034336] hub 1-0:1.0: USB hub found
<6>[    8.038104] hub 1-0:1.0: 1 port detected
<7>[    8.042052] hub 1-0:1.0: standalone hub
<7>[    8.042058] hub 1-0:1.0: ganged power switching
<7>[    8.042063] hub 1-0:1.0: individual port over-current protection
<7>[    8.042069] hub 1-0:1.0: Single TT
<7>[    8.042075] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.042082] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.042097] hub 1-0:1.0: local power source is good
<7>[    8.042104] hub 1-0:1.0: enabling power on all ports
<7>[    8.042273] drivers/usb/core/inode.c: creating file '001'
<7>[    8.042410] Module dwc_common_port init
<6>[    8.042519] mousedev: PS/2 mouse device common for all mice
<6>[    8.048308] i2c /dev entries driver
<4>[    8.051912] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.059745] comcerto_wdt: support registered
<6>[    8.064068] md: linear personality registered for level -1
<6>[    8.069570] md: raid0 personality registered for level 0
<6>[    8.074905] md: raid1 personality registered for level 1
<6>[    8.080231] md: raid10 personality registered for level 10
<6>[    8.085737] md: raid6 personality registered for level 6
<6>[    8.091068] md: raid5 personality registered for level 5
<6>[    8.096393] md: raid4 personality registered for level 4
<6>[    8.101724] md: multipath personality registered for level -4
<6>[    8.107804] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.116328] dm_crypt using the OCF for crypto acceleration.
<6>[    8.122102] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.127605] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.134163] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.140445] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.140449] 
<7>[    8.140478] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.149268] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.159783] ALSA device list:
<6>[    8.162774]   No soundcards found.
<6>[    8.166819] TCP cubic registered
<6>[    8.170058] NET: Registered protocol family 17
<6>[    8.174557] NET: Registered protocol family 15
<6>[    8.179013] Initializing NETLINK_KEY socket
<6>[    8.183226] NET: Registered protocol family 5
<6>[    8.187683] lib80211: common routines for IEEE802.11 drivers
<7>[    8.193369] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.193375] Registering the dns_resolver key type
<6>[    8.198120] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.205825] Clocks: disabled unused pll2
<6>[    8.209756] Clocks: disabled unused uart
<6>[    8.213693] Clocks: disabled unused gemtx
<6>[    8.217712] Clocks: disabled unused ipsec_spacc
<6>[    8.222263] Clocks: disabled unused dpi_cie
<6>[    8.226456] Clocks: disabled unused dpi_decomp
<6>[    8.230916] Clocks: disabled unused ntgref
<6>[    8.235023] Clocks: disabled unused pcie1
<6>[    8.239042] Clocks: disabled unused usb1
<6>[    8.242979] Clocks: disabled unused ext_phy0
<6>[    8.247259] Clocks: disabled unused ext_phy1
<6>[    8.251542] Clocks: disabled unused ext_phy2
<6>[    8.255821] Clocks: disabled unused tpi
<6>[    8.259665] Clocks: disabled unused csys
<6>[    8.263600] Clocks: disabled unused tsuntg
<6>[    8.267706] Clocks: disabled unused sata_occ
<6>[    8.271990] Clocks: disabled unused pcie_occ
<6>[    8.276270] Clocks: disabled unused sgmii_occ
<7>[    8.290471] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290491] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290495] 
<7>[    8.298979] hub 1-0:1.0: over-current change on port 1
<7>[    8.400485] hub 1-0:1.0: enabling power on all ports
<4>[    8.479682] Registering CPUFreq(comcerto)
<4>[    8.484044] Please be patient, while OpenWrt loads ...
<6>[    8.540451] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.547261] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.554097] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.561998] ata2.00: configured for UDMA/133
<5>[    8.566661] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.574800] ata2.00: set queue depth = 31
<4>[    8.579018] Check proc_name[ahci].
<5>[    8.582643] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.582749] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.595837] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.601362] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.606170] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.606245] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.652616]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.658001] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.680173] Freeing init memory: 13476K
<6>[    9.191252] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.197986] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.457492] RTC_TIME:Sun Feb  9 15:56:56 2020  0.000000 seconds
<6>[    9.480542] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.485193] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.491159] Creating 2 MTD partitions on "spi0.0":
<5>[    9.495967] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.501728] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.512039] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.519124] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.524319] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.532962] Using default values for hw ecc
<4>[    9.540585] Bad block table not found for chip 0
<4>[    9.548586] Bad block table not found for chip 0
<6>[    9.553221] Scanning device for bad blocks
<4>[    9.558363] Bad eraseblock 18 at 0x000000240000
<4>[    9.565843] Bad eraseblock 72 at 0x000000900000
<4>[    9.585484] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.591796] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.622598] Bad eraseblock 863 at 0x000006be0000
<4>[    9.648188] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.667893] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.815399] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.824909] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.831226] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.837684] Creating 5 MTD partitions on "comcertonand":
<5>[    9.843046] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.849331] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.855709] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.861912] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.868245] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.881247] usbcore: registered new interface driver usbhid
<6>[    9.886836] usbhid: USB HID core driver
<6>[    9.896339] usbcore: registered new interface driver usblp
<6>[    9.908898] ## xhci_plat_probe
<6>[    9.912010] ### comcerto_start_xhci
<6>[    9.915518] USB3.0 clock selected: internal
<6>[    9.922966] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.927874] drivers/usb/core/inode.c: creating file '002'
<6>[    9.927894] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.935127] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.940505] usb usb2: default language 0x0409
<7>[    9.940524] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.940531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.947339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.954592] usb usb2: Product: xHCI Host Controller
<6>[    9.959482] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.964900] usb usb2: SerialNumber: xhci-hcd
<7>[    9.969442] usb usb2: usb_probe_device
<7>[    9.969451] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.969462] xHCI xhci_add_endpoint called for root hub
<7>[    9.969469] xHCI xhci_check_bandwidth called for root hub
<7>[    9.969490] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.969586] hub 2-0:1.0: usb_probe_interface
<7>[    9.969592] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.969599] hub 2-0:1.0: USB hub found
<6>[    9.973391] hub 2-0:1.0: 1 port detected
<7>[    9.977324] hub 2-0:1.0: standalone hub
<7>[    9.977330] hub 2-0:1.0: no power switching (usb 1.0)
<7>[    9.977336] hub 2-0:1.0: individual port over-current protection
<7>[    9.977342] hub 2-0:1.0: Single TT
<7>[    9.977348] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    9.977355] hub 2-0:1.0: power on to power good time: 20ms
<7>[    9.977368] hub 2-0:1.0: local power source is good
<7>[    9.977375] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[    9.977517] drivers/usb/core/inode.c: creating file '001'
<6>[    9.977591] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.982521] drivers/usb/core/inode.c: creating file '003'
<6>[    9.982537] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[    9.989650] usb usb3: skipped 1 descriptor after endpoint
<7>[    9.989666] usb usb3: default language 0x0409
<7>[    9.989684] usb usb3: udev 1, busnum 3, minor = 256
<6>[    9.989691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[    9.996518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.003767] usb usb3: Product: xHCI Host Controller
<6>[   10.008657] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.014074] usb usb3: SerialNumber: xhci-hcd
<7>[   10.018583] usb usb3: usb_probe_device
<7>[   10.018592] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.018601] xHCI xhci_add_endpoint called for root hub
<7>[   10.018607] xHCI xhci_check_bandwidth called for root hub
<7>[   10.018623] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.018716] hub 3-0:1.0: usb_probe_interface
<7>[   10.018723] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.018729] hub 3-0:1.0: USB hub found
<6>[   10.022521] hub 3-0:1.0: 1 port detected
<7>[   10.026454] hub 3-0:1.0: standalone hub
<7>[   10.026460] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.026466] hub 3-0:1.0: individual port over-current protection
<7>[   10.026473] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.026480] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.026493] hub 3-0:1.0: local power source is good
<7>[   10.026500] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.026635] drivers/usb/core/inode.c: creating file '001'
<6>[   10.034072] Initializing USB Mass Storage driver...
<6>[   10.039074] usbcore: registered new interface driver usb-storage
<6>[   10.045114] USB Mass Storage support registered.
<7>[   10.070485] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.120492] hub 3-0:1.0: port 1: status 0203 change 0031
<7>[   10.170643] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.170687] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.290485] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.312764] usb 2-1: default language 0x0409
<7>[   10.313289] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.313300] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.320027] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.327227] usb 2-1: Product: USB2.0 Hub
<6>[   10.331176] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.335998] usb 2-1: usb_probe_device
<7>[   10.336011] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.341655] usb 2-1: Successful Endpoint Configure command
<7>[   10.341898] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.342044] hub 2-1:1.0: usb_probe_interface
<7>[   10.342053] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.342060] hub 2-1:1.0: USB hub found
<6>[   10.346122] hub 2-1:1.0: 4 ports detected
<7>[   10.350155] hub 2-1:1.0: standalone hub
<7>[   10.350163] hub 2-1:1.0: individual port power switching
<7>[   10.350168] hub 2-1:1.0: individual port over-current protection
<7>[   10.373804] usb 2-1: Successful Endpoint Configure command
<7>[   10.374149] hub 2-1:1.0: TT per port
<7>[   10.374159] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.374165] hub 2-1:1.0: Port indicators are supported
<7>[   10.374172] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.374512] usb 2-1: Successful Endpoint Configure command
<7>[   10.374700] hub 2-1:1.0: local power source is good
<7>[   10.374709] hub 2-1:1.0: enabling power on all ports
<7>[   10.375645] drivers/usb/core/inode.c: creating file '002'
<7>[   10.375745] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.375770] hub 3-0:1.0: reset change on port 1
<7>[   10.375788] hub 3-0:1.0: port 1, status 0203, change 0010, 5.0 Gb/s
<4>[   10.433569] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.439954] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.471611] hub 2-1:1.0: port 3: status 0301 change 0001
<4>[   10.481719] flashcache: flashcache-1.0-dummy initialized
<6>[   10.490598] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.512385] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.512562] usb 3-1: default language 0x0409
<7>[   10.513096] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.513104] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.519829] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.527025] usb 3-1: Product: USB3.0 Hub
<6>[   10.530969] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.535777] usb 3-1: usb_probe_device
<7>[   10.535787] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.549627] usb 3-1: Successful Endpoint Configure command
<7>[   10.549812] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.550210] hub 3-1:1.0: usb_probe_interface
<7>[   10.550218] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.550225] hub 3-1:1.0: USB hub found
<6>[   10.554292] hub 3-1:1.0: 4 ports detected
<7>[   10.558316] hub 3-1:1.0: standalone hub
<7>[   10.558322] hub 3-1:1.0: individual port power switching
<7>[   10.558327] hub 3-1:1.0: individual port over-current protection
<7>[   10.558335] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.558342] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.558534] usb 3-1: Successful Endpoint Configure command
<7>[   10.558677] hub 3-1:1.0: local power source is good
<7>[   10.558786] hub 3-1:1.0: enabling power on all ports
<7>[   10.559523] drivers/usb/core/inode.c: creating file '002'
<7>[   10.570474] hub 2-1:1.0: state 7 ports 4 chg 0008 evt 0000
<7>[   10.570652] hub 2-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
<6>[   10.651125] usb 2-1.3: new low-speed USB device number 3 using xhci-hcd
<5>[   10.651834] UBI: attaching mtd3 to ubi0
<5>[   10.651841] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.651846] UBI: logical eraseblock size:    126976 bytes
<5>[   10.651850] UBI: smallest flash I/O unit:    2048
<5>[   10.651855] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.651859] UBI: data offset:                4096
<7>[   10.704512] usb 2-1.3: skipped 1 descriptor after interface
<7>[   10.705167] usb 2-1.3: default language 0x0409
<7>[   10.712149] usb 2-1.3: udev 3, busnum 2, minor = 130
<6>[   10.712157] usb 2-1.3: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.719054] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.726408] usb 2-1.3: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.733328] usb 2-1.3: Manufacturer: American Power Conversion
<6>[   10.739177] usb 2-1.3: SerialNumber: 3B1524X23300  
<7>[   10.744600] usb 2-1.3: usb_probe_device
<7>[   10.744611] usb 2-1.3: configuration #1 chosen from 1 choice
<4>[   10.744677] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.757615] usb 2-1.3: Successful Endpoint Configure command
<7>[   10.758308] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
<7>[   10.758424] usbhid 2-1.3:1.0: usb_probe_interface
<7>[   10.758432] usbhid 2-1.3:1.0: usb_probe_interface - got id
<7>[   11.085404] usbhid 2-1.3:1.0: looking for a minor, starting at 96
<6>[   11.085563] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.3/input0
<7>[   11.101321] drivers/usb/core/inode.c: creating file '003'
<7>[   11.101405] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.164062] UBI: max. sequence number:       2
<5>[   12.180847] UBI: attached mtd3 to ubi0
<5>[   12.184606] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.190279] UBI: MTD device size:            216 MiB
<5>[   12.195282] UBI: number of good PEBs:        1723
<5>[   12.199997] UBI: number of bad PEBs:         5
<5>[   12.204458] UBI: number of corrupted PEBs:   0
<5>[   12.208913] UBI: max. allowed volumes:       128
<5>[   12.213545] UBI: wear-leveling threshold:    4096
<5>[   12.218260] UBI: number of internal volumes: 1
<5>[   12.222720] UBI: number of user volumes:     1
<5>[   12.227173] UBI: available PEBs:             0
<5>[   12.231631] UBI: total number of reserved PEBs: 1723
<5>[   12.236608] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.242721] UBI: max/mean erase counter: 22/14
<5>[   12.247175] UBI: image sequence number:  1535285440
<5>[   12.252080] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.368208] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.374335] UBIFS: mounted read-only
<5>[   12.377921] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.385957] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.393296] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.399144] UBIFS: default compressor: lzo
<5>[   12.403257] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.853529] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.929496] UBI: mtd3 is detached from ubi0
<6>[   33.942512] usbcore: registered new interface driver usbserial
<6>[   33.948364] usbserial: USB Serial Driver core
<6>[   33.958249] USB Serial support registered for pl2303
<6>[   33.963347] usbcore: registered new interface driver pl2303
<6>[   33.968934] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.980783] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.994457] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.000875] Disabling lock debugging due to kernel taint
<5>[   34.027328] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.027334] NTFSJ support included
<5>[   34.027336] exFAT support included
<5>[   34.027338] Hfs+J support included
<5>[   34.027340] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.054577] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.059033] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.331289] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.340602] udev: starting version 140
<6>[   34.347409] pfe_module_init
<6>[   34.350262] pfe_platform_probe
<6>[   34.354388] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.360201] pfe_probe
<6>[   34.362492] PFE Driver version:
<6>[   34.362494] pfe_ctrl_10_00_4
<6>[   34.362496] built with pfe sources version: pfe_10_00_3
<6>[   34.373766] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.383364] pfe_hw_init
<6>[   34.385815] CLASS version: 20
<6>[   34.388789] TMU version: 1011231
<6>[   34.392028] BMU1 version: 21
<6>[   34.394914] BMU2 version: 21
<6>[   34.397800] EMAC1 network cfg: 80000
<6>[   34.401387] EMAC2 network cfg: 80000
<6>[   34.404970] EMAC3 network cfg: 80000
<6>[   34.408552] EGPI1 version: 50
<6>[   34.411529] EGPI2 version: 50
<6>[   34.414503] EGPI3 version: 50
<6>[   34.417476] HGPI version: 50
<6>[   34.420362] GPT version: 0
<6>[   34.423078] HIF version: 10
<6>[   34.425876] HIF NOPCY version: 10
<6>[   34.429198] UTIL version: 20
<6>[   34.432089] bmu_init(1) done
<6>[   34.434976] bmu_init(2) done
<6>[   34.444321] class_init() done
<6>[   34.447299] tmu_init: mem init
<6>[   34.450359] tmu_init: lmem init
<6>[   34.453556] tmu_init() done
<6>[   34.456355] util_init() done
<6>[   34.459244] gpi_init(1) done
<6>[   34.462137] gpi_init(2) done
<6>[   34.465025] gpi_init(3) done
<6>[   34.467913] gpi_init(hif) done
<6>[   34.470977] bmu_enable(1) done
<6>[   34.474037] bmu_enable(2) done
<6>[   34.477097] pfe_hif_lib_init
<6>[   34.480156] pfe_hif_init
<6>[   34.482703] pfe_hif_alloc_descr
<6>[   34.485949] pfe_hif_init_buffers
<6>[   34.489307] pfe_firmware_init
<6>[   34.651454] pfe_load_elf
<3>[   34.654010] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.685491] PFE binary version: pfe_10_00_3
<6>[   34.689690] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.696160] pfe_load_elf
<6>[   34.700075] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.705408] pfe_load_elf
<6>[   34.709728] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.715277] pfe_ctrl_init
<6>[   34.736021] pfe_ctrl_init finished
<6>[   34.736028] pfe_ctrl_timer
<6>[   34.742161] pfe_eth_init
<6>[   34.753370] Comcerto MDIO Bus: probed
<6>[   34.758330] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.766842] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.773703] pfe_vwd_init
<6>[   34.776371] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.781378] pfe_vwd_driver_init: start
<4>[   34.785143] pfe_vwd_up: start
<6>[   34.788171] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.795273] pfe_vwd_driver_init: end
<6>[   34.798864] pfe_pcap_init
<6>[   34.847060] eth0: pfe_eth_open
<6>[   34.850280] hif_process_client_req: register client_id 0
<6>[   34.855637] pfe_hif_client_register
<6>[   34.859176] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.867506] eth0: pfe_gemac_init
<6>[   34.873003] eth0: pfe_eth_close
<6>[   34.910438] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.919863] hif_process_client_req: unregister client_id 0
<6>[   34.925369] pfe_hif_client_unregister
<6>[   34.929540] eth1: pfe_eth_open
<6>[   34.932768] hif_process_client_req: register client_id 1
<6>[   34.938094] pfe_hif_client_register
<6>[   34.941606] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.949895] eth1: pfe_gemac_init
<6>[   34.953775] eth1: pfe_eth_close
<6>[   34.990434] hif_lib_client_unregister : client: 9fac03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.999853] hif_process_client_req: unregister client_id 1
<6>[   35.005359] pfe_hif_client_unregister
<6>[   35.443350] kjournald starting.  Commit interval 5 seconds
<6>[   35.448882] EXT3-fs (sda1): using internal journal
<6>[   35.453708] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.873404] kjournald starting.  Commit interval 5 seconds
<6>[   35.873684] EXT3-fs (sda1): using internal journal
<6>[   35.873695] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.335534] kjournald starting.  Commit interval 5 seconds
<6>[   36.341088] EXT3-fs (sdb1): using internal journal
<6>[   36.345897] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.688090] md: md9 stopped.
<6>[   36.693588] md: bind<sdb1>
<6>[   36.696618] md: bind<sda1>
<6>[   36.702388] bio: create slab <bio-1> at 1
<6>[   36.706604] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.712202] created bitmap (1 pages) for device md9
<6>[   36.717261] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.744469] md9: detected capacity change from 0 to 542769152
<6>[   37.804186]  md9: unknown partition table
<6>[   38.107188] kjournald starting.  Commit interval 5 seconds
<6>[   38.112952] EXT3-fs (md9): using internal journal
<6>[   38.117676] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.418144] md: md13 stopped.
<6>[   38.426607] md: bind<sdb4>
<6>[   38.429619] md: bind<sda4>
<6>[   38.435471] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.441181] created bitmap (1 pages) for device md13
<6>[   38.446347] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.497997] md13: detected capacity change from 0 to 469893120
<4>[   49.234449] set stripe cache size 1024
<4>[   49.238812] STRIPE_CACHE_SIZE is 1024
<6>[   50.174874] md: bind<sda2>
<6>[   50.195945] md: bind<sdb2>
<6>[   50.205925] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   50.219639] created bitmap (1 pages) for device md256
<6>[   50.224929] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   50.414842] md256: detected capacity change from 0 to 542834688
<6>[   50.532575]  md256: unknown partition table
<6>[   50.608875] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   51.030918] md: bind<sda5>
<6>[   51.033855] md: bind<sdb5>
<6>[   51.039672] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   51.045388] created bitmap (1 pages) for device md322
<6>[   51.050731] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   51.075120] md322: detected capacity change from 0 to 7408779264
<6>[   51.137374]  md322: unknown partition table
<6>[   51.208660] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   51.494965]  md13: unknown partition table
<6>[   63.647064] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   64.694014] [S30mountall] start
<5>[   65.103448] UBI: attaching mtd3 to ubi0
<5>[   65.107321] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   65.113665] UBI: logical eraseblock size:    126976 bytes
<5>[   65.119202] UBI: smallest flash I/O unit:    2048
<5>[   65.124073] UBI: VID header offset:          2048 (aligned 2048)
<5>[   65.130172] UBI: data offset:                4096
<5>[   66.611854] UBI: max. sequence number:       2
<5>[   66.628744] UBI: attached mtd3 to ubi0
<5>[   66.632527] UBI: MTD device name:            "boot1_rootfs2"
<5>[   66.638202] UBI: MTD device size:            216 MiB
<5>[   66.643183] UBI: number of good PEBs:        1723
<5>[   66.647899] UBI: number of bad PEBs:         5
<5>[   66.652357] UBI: number of corrupted PEBs:   0
<5>[   66.656810] UBI: max. allowed volumes:       128
<5>[   66.661442] UBI: wear-leveling threshold:    4096
<5>[   66.666157] UBI: number of internal volumes: 1
<5>[   66.670615] UBI: number of user volumes:     1
<5>[   66.675069] UBI: available PEBs:             0
<5>[   66.679522] UBI: total number of reserved PEBs: 1723
<5>[   66.684502] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   66.690615] UBI: max/mean erase counter: 22/14
<5>[   66.695069] UBI: image sequence number:  1535285440
<5>[   66.699969] UBI: background thread "ubi_bgt0d" started, PID 1476
<5>[   66.829564] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   66.835696] UBIFS: mounted read-only
<5>[   66.839283] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   66.847317] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   66.854650] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   66.860503] UBIFS: default compressor: lzo
<5>[   66.864608] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   86.205291] UBIFS: un-mount UBI device 0, volume 0
<5>[   86.249757] UBI: mtd3 is detached from ubi0
<5>[   86.860907] UBI: attaching mtd3 to ubi0
<5>[   86.864760] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   86.871076] UBI: logical eraseblock size:    126976 bytes
<5>[   86.876488] UBI: smallest flash I/O unit:    2048
<5>[   86.881220] UBI: VID header offset:          2048 (aligned 2048)
<5>[   86.887242] UBI: data offset:                4096
<5>[   88.378195] UBI: max. sequence number:       2
<5>[   88.395063] UBI: attached mtd3 to ubi0
<5>[   88.398830] UBI: MTD device name:            "boot1_rootfs2"
<5>[   88.404523] UBI: MTD device size:            216 MiB
<5>[   88.409500] UBI: number of good PEBs:        1723
<5>[   88.414220] UBI: number of bad PEBs:         5
<5>[   88.418675] UBI: number of corrupted PEBs:   0
<5>[   88.423133] UBI: max. allowed volumes:       128
<5>[   88.427761] UBI: wear-leveling threshold:    4096
<5>[   88.432480] UBI: number of internal volumes: 1
<5>[   88.436939] UBI: number of user volumes:     1
<5>[   88.441436] UBI: available PEBs:             0
<5>[   88.445898] UBI: total number of reserved PEBs: 1723
<5>[   88.450883] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   88.456991] UBI: max/mean erase counter: 22/14
<5>[   88.461450] UBI: image sequence number:  1535285440
<5>[   88.466350] UBI: background thread "ubi_bgt0d" started, PID 1600
<5>[   88.596381] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   88.602511] UBIFS: mounted read-only
<5>[   88.606097] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   88.614130] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   88.621464] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   88.627311] UBIFS: default compressor: lzo
<5>[   88.631422] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   88.710081] UBIFS: un-mount UBI device 0, volume 0
<5>[   88.756470] UBI: mtd3 is detached from ubi0
<6>[   88.974663] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  106.445179] UBI: attaching mtd6 to ubi2
<5>[  106.449035] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  106.455356] UBI: logical eraseblock size:    126976 bytes
<5>[  106.460778] UBI: smallest flash I/O unit:    2048
<5>[  106.465498] UBI: VID header offset:          2048 (aligned 2048)
<5>[  106.471532] UBI: data offset:                4096
<5>[  106.743773] UBI: max. sequence number:       204
<5>[  106.780492] UBI: attached mtd6 to ubi2
<5>[  106.784271] UBI: MTD device name:            "config"
<5>[  106.789337] UBI: MTD device size:            15 MiB
<5>[  106.794248] UBI: number of good PEBs:        120
<5>[  106.798880] UBI: number of bad PEBs:         0
<5>[  106.803354] UBI: number of corrupted PEBs:   0
<5>[  106.807808] UBI: max. allowed volumes:       128
<5>[  106.812444] UBI: wear-leveling threshold:    4096
<5>[  106.817159] UBI: number of internal volumes: 1
<5>[  106.821625] UBI: number of user volumes:     1
<5>[  106.826082] UBI: available PEBs:             0
<5>[  106.830546] UBI: total number of reserved PEBs: 120
<5>[  106.835437] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  106.841465] UBI: max/mean erase counter: 3/2
<5>[  106.845745] UBI: image sequence number:  1872325126
<5>[  106.851251] UBI: background thread "ubi_bgt2d" started, PID 2037
<5>[  107.050968] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  107.057000] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  107.064619] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  107.071963] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  107.077811] UBIFS: default compressor: lzo
<5>[  107.081928] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  107.705352] UBIFS: un-mount UBI device 2, volume 0
<5>[  107.812525] UBI: mtd6 is detached from ubi2
<4>[  108.334902] [S30mountall] end
<4>[  108.338555] [S31init_hardware] start
<6>[  108.627296] sysinfo: Module loaded.
<6>[  109.098858] fnotify: Load file notify kernel module.
<6>[  110.490843] usbcore: registered new interface driver snd-usb-audio
<6>[  110.541137] usbcore: registered new interface driver snd-usb-caiaq
<6>[  110.572065] Linux video capture interface: v2.00
<6>[  110.657508] usbcore: registered new interface driver uvcvideo
<6>[  110.663311] USB Video Class driver (1.1.1)
<6>[  110.889900] NET: Registered protocol family 10
<4>[  113.841973] [S31init_hardware] end
<4>[  113.845955] [S32init_mac_addr] start
<6>[  114.499645] eth0: pfe_eth_open
<6>[  114.502880] hif_process_client_req: register client_id 1
<6>[  114.508206] pfe_hif_client_register
<6>[  114.511720] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  114.520011] eth0: pfe_gemac_init
<6>[  114.523826] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  115.131332] eth1: pfe_eth_open
<6>[  115.134550] hif_process_client_req: register client_id 0
<6>[  115.139888] pfe_hif_client_register
<6>[  115.143423] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  115.151723] eth1: pfe_gemac_init
<6>[  115.155542] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  116.881338] [S32init_mac_addr] end
<4>[  116.885313] [S33sysinit] start
<6>[  117.520641] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  117.526058] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  128.790432] eth0: no IPv6 routers present
<5>[  137.952039] UBI: attaching mtd6 to ubi2
<5>[  137.955892] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  137.962199] UBI: logical eraseblock size:    126976 bytes
<5>[  137.967612] UBI: smallest flash I/O unit:    2048
<5>[  137.972337] UBI: VID header offset:          2048 (aligned 2048)
<5>[  137.978358] UBI: data offset:                4096
<5>[  138.086054] UBI: max. sequence number:       205
<5>[  138.103144] UBI: attached mtd6 to ubi2
<5>[  138.106933] UBI: MTD device name:            "config"
<5>[  138.112030] UBI: MTD device size:            15 MiB
<5>[  138.116920] UBI: number of good PEBs:        120
<5>[  138.121555] UBI: number of bad PEBs:         0
<5>[  138.126008] UBI: number of corrupted PEBs:   0
<5>[  138.130466] UBI: max. allowed volumes:       128
<5>[  138.135094] UBI: wear-leveling threshold:    4096
<5>[  138.139809] UBI: number of internal volumes: 1
<5>[  138.144267] UBI: number of user volumes:     1
<5>[  138.148721] UBI: available PEBs:             0
<5>[  138.153181] UBI: total number of reserved PEBs: 120
<5>[  138.158071] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  138.164099] UBI: max/mean erase counter: 3/2
<5>[  138.168379] UBI: image sequence number:  1872325126
<5>[  138.173285] UBI: background thread "ubi_bgt2d" started, PID 2699
<5>[  138.298026] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  138.304071] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  138.311670] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  138.319000] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  138.324852] UBIFS: default compressor: lzo
<5>[  138.328958] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  138.349146] UBIFS: un-mount UBI device 2, volume 0
<4>[  162.493957] [S33sysinit] end
<4>[  162.497434] [S34shutdown_check] start
<4>[  162.772795] [S34shutdown_check] end
<4>[  162.776941] [S35init_disk] start
<5>[  163.084452] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  163.090499] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  163.098090] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  163.105428] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  163.111283] UBIFS: default compressor: lzo
<5>[  163.115389] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  163.255974] UBIFS: un-mount UBI device 2, volume 0
<5>[  163.336324] UBI: mtd6 is detached from ubi2
<4>[  164.829710] [S35init_disk] end
<4>[  164.833502] [S40init_network] start
<4>[  164.847993] [S40init_network] end
<4>[  164.852070] [S42hostname] start
<4>[  165.305758] [S42hostname] end
<4>[  165.309314] [S45network] start
<5>[  175.347948] Bridge firewalling registered
<6>[  175.887403] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  175.894602] bonding: MII link monitoring set to 100 ms
<6>[  183.636015] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  192.646316] [S45network] end
<4>[  192.649787] [S46iSCSItrgt] start
<4>[  198.451568] [S46iSCSItrgt] end
<4>[  198.455184] [S46iscsiinit] start
<6>[  198.485584] Loading iSCSI transport class v2.0-870.
<5>[  198.515636] iscsi: registered transport (tcp)
<4>[  200.791548] [S46iscsiinit] end
<4>[  200.795427] [S55urandom] start
<4>[  200.839312] [S55urandom] end
<4>[  200.842930] [S56mariadb] start
<4>[  200.967251] [S56mariadb] end
<4>[  200.970791] [S56start_service] start
<4>[  201.074971] [S56start_service] end
<4>[  201.079000] [S57init_qpkg] start
<4>[  319.681109] [S57init_qpkg] end
<4>[  319.684728] [S57ldap] start
<4>[  319.723421] [S57ldap] end
<4>[  319.726585] [S58dbus] start
<4>[  321.840220] [S58dbus] end
<4>[  321.843464] [S58nsswitch] start
<4>[  322.031519] [S58nsswitch] end
<4>[  322.035041] [S58printer] start
<4>[  322.201747] [S58printer] end
<4>[  327.209050] [S59Qthttpd] start
<4>[  344.228220] [S59Qthttpd] end
<4>[  344.233369] [S62cupsd] start
<4>[  347.404885] [S62cupsd] end
<4>[  347.408266] [S62ntpd] start
<4>[  347.494037] [S62ntpd] end
<4>[  347.497174] [S62smb] start
<4>[  372.449827] [S62smb] end
<4>[  372.453193] [S64MediaService] start
<4>[  373.036551] [S64MediaService] end
<4>[  373.040897] [S65thttpd] start
<4>[  381.012392] [S65thttpd] end
<4>[  381.015730] [S66ImRd] start
<4>[  381.019898] [S66ImRd] end
<4>[  381.023383] [S66wfm_thttpd] start
<4>[  383.076739] [S66wfm_thttpd] end
<4>[  383.080404] [S67ftp] start
<4>[  383.241764] [S67ftp] end
<4>[  383.244880] [S70crond] start
<4>[  383.249086] [S70crond] end
<4>[  383.252621] [S72logo] start
<4>[  383.257002] [S72logo] end
<4>[  383.260272] [S73ntpclient] start
<4>[  383.271237] [S73ntpclient] end
<4>[  383.275007] [S75stunnel] start
<4>[  383.293871] [S75stunnel] end
<4>[  383.297409] [S77recycled] start
<4>[  387.787385] [S77recycled] end
<4>[  387.790934] [S78qraid1] start
<4>[  387.795237] [S78qraid1] end
<4>[  387.798886] [S83ups] start
<4>[  387.803110] [S83ups] end
<4>[  387.806346] [S85login] start
<4>[  387.818231] [S85login] end
<4>[  387.821839] [S89bonjour] start
<4>[  387.826186] [S89bonjour] end
<4>[  387.829726] [S89wsd] start
<4>[  387.861987] [S89wsd] end
<4>[  398.325181] [S90twonkymedia] start
<4>[  398.329942] [S90twonkymedia] end
<4>[  398.333991] [S92lunportman] start
<4>[  398.339114] [S92lunportman] end
<4>[  398.343272] [S95snmp] start
<4>[  398.347505] [S95snmp] end
<4>[  398.359522] [S97upnpd] start
<4>[  398.363788] [S97upnpd] end
<4>[  398.370184] [S98init_nas] start
<5>[  404.239920] UBI: attaching mtd6 to ubi2
<5>[  404.243844] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  404.250148] UBI: logical eraseblock size:    126976 bytes
<5>[  404.255603] UBI: smallest flash I/O unit:    2048
<5>[  404.260325] UBI: VID header offset:          2048 (aligned 2048)
<5>[  404.266366] UBI: data offset:                4096
<5>[  404.417179] UBI: max. sequence number:       207
<5>[  404.432605] UBI: attached mtd6 to ubi2
<5>[  404.436372] UBI: MTD device name:            "config"
<5>[  404.441482] UBI: MTD device size:            15 MiB
<5>[  404.446378] UBI: number of good PEBs:        120
<5>[  404.451031] UBI: number of bad PEBs:         0
<5>[  404.455489] UBI: number of corrupted PEBs:   0
<5>[  404.459946] UBI: max. allowed volumes:       128
<5>[  404.464586] UBI: wear-leveling threshold:    4096
<5>[  404.469309] UBI: number of internal volumes: 1
<5>[  404.473783] UBI: number of user volumes:     1
<5>[  404.478240] UBI: available PEBs:             0
<5>[  404.482711] UBI: total number of reserved PEBs: 120
<5>[  404.487603] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  404.493648] UBI: max/mean erase counter: 3/2
<5>[  404.497935] UBI: image sequence number:  1872325126
<5>[  404.503088] UBI: background thread "ubi_bgt2d" started, PID 10425
<5>[  404.634424] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  404.640488] UBIFS: mounted read-only
<5>[  404.644077] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  404.651676] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  404.659007] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  404.664870] UBIFS: default compressor: lzo
<5>[  404.668980] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  404.681767] UBIFS: un-mount UBI device 2, volume 0
<5>[  404.719873] UBI: mtd6 is detached from ubi2
<4>[  407.211894] rule type=2, num=0
<4>[  412.145465] [S98init_nas] end
<4>[  412.149025] [S99atalk] start
<4>[  412.155737] [S99atalk] end
<4>[  412.159269] [S99cloudinstall_report_complete_daemon] start
<4>[  412.181912] [S99cloudinstall_report_complete_daemon] end
<4>[  412.187850] [S99init_iTune] start
<4>[  412.234150] [S99init_iTune] end
<4>[  412.237990] [S99mysqld] start
<4>[  412.297471] [S99mysqld] end
<4>[  412.326663] [S99nfs] start
<4>[  412.358357] [S99nfs] end
<4>[  412.384675] [S99porter] start
<4>[  412.411852] [S99porter] end
<4>[  412.415277] [S99qanalytic] start
<4>[  412.419969] [S99qanalytic] end
<4>[  412.503053] [S99qcloud] start
<4>[  412.507952] [S99qcloud] end
<4>[  412.551357] [S99qsyncman] start
<4>[  412.602342] [S99qsyncman] end
<4>[  412.605964] [S99sdmd.sh] start
<4>[  412.652548] [S99sdmd.sh] end
<4>[  412.656144] [S99sync_action.sh] start
<4>[  412.718559] [S99sync_action.sh] end
<4>[  412.761471] [S99z_antivirus] start
<4>[  412.802443] [S99z_antivirus] end
<4>[  493.643349] ====== 2020-02-09 16:05:01 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  501.443054] UBI: attaching mtd6 to ubi2
<5>[  501.446955] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  501.453240] UBI: logical eraseblock size:    126976 bytes
<5>[  501.458666] UBI: smallest flash I/O unit:    2048
<5>[  501.463384] UBI: VID header offset:          2048 (aligned 2048)
<5>[  501.469425] UBI: data offset:                4096
<5>[  501.666191] UBI: max. sequence number:       207
<5>[  501.682264] UBI: attached mtd6 to ubi2
<5>[  501.686033] UBI: MTD device name:            "config"
<5>[  501.691147] UBI: MTD device size:            15 MiB
<5>[  501.696052] UBI: number of good PEBs:        120
<5>[  501.700697] UBI: number of bad PEBs:         0
<5>[  501.705161] UBI: number of corrupted PEBs:   0
<5>[  501.709632] UBI: max. allowed volumes:       128
<5>[  501.714261] UBI: wear-leveling threshold:    4096
<5>[  501.718985] UBI: number of internal volumes: 1
<5>[  501.723446] UBI: number of user volumes:     1
<5>[  501.727921] UBI: available PEBs:             0
<5>[  501.732376] UBI: total number of reserved PEBs: 120
<5>[  501.737291] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  501.743322] UBI: max/mean erase counter: 3/2
<5>[  501.747612] UBI: image sequence number:  1872325126
<5>[  501.765266] UBI: background thread "ubi_bgt2d" started, PID 14421
<5>[  501.946842] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  501.952873] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  501.960500] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  501.967848] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  501.973696] UBIFS: default compressor: lzo
<5>[  501.977814] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  502.343131] UBIFS: un-mount UBI device 2, volume 0
<5>[  502.415822] UBI: mtd6 is detached from ubi2
<4>[ 1492.562739] ==== memory usage ====
<4>[ 1492.584415] MemTotal:         490756 kB
<4>[ 1492.593562] MemFree:           62832 kB
<4>[ 1492.598829] Buffers:            9268 kB
<4>[ 1492.602697] Cached:           223108 kB
<4>[ 1492.607559] SwapCached:         3076 kB
<4>[ 1492.611430] Active:           166672 kB
<4>[ 1492.618193] Inactive:         199076 kB
<4>[ 1492.625319] Active(anon):     123180 kB
<4>[ 1492.629224] Inactive(anon):   154120 kB
<4>[ 1492.633086] Active(file):      43492 kB
<4>[ 1492.638257] Inactive(file):    44956 kB
<4>[ 1492.642127] Unevictable:        2012 kB
<4>[ 1492.645984] Mlocked:            2012 kB
<4>[ 1492.649866] SwapTotal:       7765240 kB
<4>[ 1492.653725] SwapFree:        7754684 kB
<4>[ 1492.657602] Dirty:                16 kB
<4>[ 1492.661495] Writeback:             0 kB
<4>[ 1492.666575] AnonPages:        132332 kB
<4>[ 1492.671285] Mapped:           123964 kB
<4>[ 1492.675153] Shmem:            143788 kB
<4>[ 1492.679061] Slab:              33828 kB
<4>[ 1492.682927] SReclaimable:      19112 kB
<4>[ 1492.693101] SUnreclaim:        14716 kB
<4>[ 1492.697013] KernelStack:        2880 kB
<4>[ 1492.702104] PageTables:         5572 kB
<4>[ 1492.705970] NFS_Unstable:          0 kB
<4>[ 1492.709852] Bounce:                0 kB
<4>[ 1492.713712] WritebackTmp:          0 kB
<4>[ 1492.717590] CommitLimit:     8010616 kB
<4>[ 1492.721785] Committed_AS:    2382024 kB
<4>[ 1492.725652] VmallocTotal:    1302528 kB
<4>[ 1492.729609] VmallocUsed:       57252 kB
<4>[ 1492.735956] VmallocChunk:    1212348 kB
<4>[ 1492.773949] Node 0, zone      DMA
<4>[ 1492.777434]   pages free     10974
<4>[ 1492.780864]         min      366
<4>[ 1492.784116]         low      457
<4>[ 1492.787420]         high     549
<4>[ 1492.790673]         scanned  0
<4>[ 1492.793750]         spanned  11264
<4>[ 1492.799420]         present  11154
<4>[ 1492.803704]     nr_free_pages 10974
<4>[ 1492.811023]     nr_inactive_anon 0
<4>[ 1492.816786]     nr_active_anon 0
<4>[ 1492.820045]     nr_inactive_file 0
<4>[ 1492.823468]     nr_active_file 0
<4>[ 1492.826745]     nr_unevictable 0
<4>[ 1492.829996]     nr_mlock     0
<4>[ 1492.833068]     nr_anon_pages 0
<4>[ 1492.836253]     nr_mapped    0
<4>[ 1492.840118]     nr_file_pages 0
<4>[ 1492.843284]     nr_dirty     0
<4>[ 1492.848196]     nr_writeback 0
<4>[ 1492.851915]     nr_slab_reclaimable 0
<4>[ 1492.856515]     nr_slab_unreclaimable 0
<4>[ 1492.860377]     nr_page_table_pages 0
<4>[ 1492.864953]     nr_kernel_stack 0
<4>[ 1492.872313]     nr_unstable  0
<4>[ 1492.877183]     nr_bounce    0
<4>[ 1492.882308]     nr_vmscan_write 0
<4>[ 1492.887619]     nr_vmscan_immediate_reclaim 0
<4>[ 1492.894217]     nr_writeback_temp 0
<4>[ 1492.898732]     nr_isolated_anon 0
<4>[ 1492.903433]     nr_isolated_file 0
<4>[ 1492.906902]     nr_shmem     0
<4>[ 1492.912420]     nr_dirtied   0
<4>[ 1492.915507]     nr_written   0
<4>[ 1492.918842]     nr_anon_transparent_hugepages 0
<4>[ 1492.923404]         protection: (0, 443, 443)
<4>[ 1492.929975]   pagesets
<4>[ 1492.932365]     cpu: 0
<4>[ 1492.934746]               count: 1
<4>[ 1492.940419]               high:  6
<4>[ 1492.943855]               batch: 1
<4>[ 1492.947326]   vm stats threshold: 4
<4>[ 1492.950837]     cpu: 1
<4>[ 1492.961889]               count: 5
<4>[ 1492.965472]               high:  6
<4>[ 1492.968957]               batch: 1
<4>[ 1492.973256]   vm stats threshold: 4
<4>[ 1492.976801]   all_unreclaimable: 0
<4>[ 1492.980230]   start_pfn:         0
<4>[ 1492.983651]   inactive_ratio:    1
<4>[ 1492.987096] Node 0, zone   Normal
<4>[ 1492.990434]   pages free     4763
<4>[ 1492.996592]         min      3729
<4>[ 1492.999938]         low      4661
<4>[ 1493.004518]         high     5593
<4>[ 1493.009025]         scanned  0
<4>[ 1493.012951]         spanned  119808
<4>[ 1493.017512]         present  113518
<4>[ 1493.023067]     nr_free_pages 4763
<4>[ 1493.026787]     nr_inactive_anon 38530
<4>[ 1493.030566]     nr_active_anon 30795
<4>[ 1493.034668]     nr_inactive_file 11169
<4>[ 1493.041855]     nr_active_file 10873
<4>[ 1493.053208]     nr_unevictable 503
<4>[ 1493.056671]     nr_mlock     503
<4>[ 1493.061191]     nr_anon_pages 33083
<4>[ 1493.064707]     nr_mapped    30991
<4>[ 1493.068156]     nr_file_pages 58787
<4>[ 1493.071667]     nr_dirty     4
<4>[ 1493.074739]     nr_writeback 0
<4>[ 1493.078825]     nr_slab_reclaimable 4778
<4>[ 1493.082776]     nr_slab_unreclaimable 3679
<4>[ 1493.087892]     nr_page_table_pages 1393
<4>[ 1493.092702]     nr_kernel_stack 360
<4>[ 1493.096250]     nr_unstable  0
<4>[ 1493.099329]     nr_bounce    0
<4>[ 1493.103626]     nr_vmscan_write 2682
<4>[ 1493.108220]     nr_vmscan_immediate_reclaim 60
<4>[ 1493.112693]     nr_writeback_temp 0
<4>[ 1493.116206]     nr_isolated_anon 0
<4>[ 1493.119672]     nr_isolated_file 0
<4>[ 1493.123100]     nr_shmem     35947
<4>[ 1493.126550]     nr_dirtied   263255
<4>[ 1493.130060]     nr_written   264232
<4>[ 1493.133568]     nr_anon_transparent_hugepages 0
<4>[ 1493.140908]         protection: (0, 0, 0)
<4>[ 1493.146164]   pagesets
<4>[ 1493.149517]     cpu: 0
<4>[ 1493.155989]               count: 99
<4>[ 1493.160207]               high:  186
<4>[ 1493.163821]               batch: 31
<4>[ 1493.168320]   vm stats threshold: 12
<4>[ 1493.196321]     cpu: 1
<4>[ 1493.198770]               count: 160
<4>[ 1493.202389]               high:  186
<4>[ 1493.216325]               batch: 31
<4>[ 1493.219863]   vm stats threshold: 12
<4>[ 1493.223480]   all_unreclaimable: 0
<4>[ 1493.228325]   start_pfn:         11264
<4>[ 1493.235624]   inactive_ratio:    1
<4>[ 1493.302213] Filename				Type		Size	Used	Priority
<4>[ 1493.326474] /dev/md256                              partition	530108	10540	-1
<4>[ 1493.335289] /dev/md322                              partition	7235132	0	-2
<4>[ 1493.445830]               total         used         free       shared      buffers
<4>[ 1493.445839]   Mem:       490756       427780        62976            0         9176
<4>[ 1493.445844]  Swap:      7765240        10540      7754700
<4>[ 1493.445848] Total:      8255996       438320      7817676
<4>[ 1493.506417] ==== end ====
<6>[ 1521.980215] md: bind<sda3>
<6>[ 1522.005126] md: bind<sdb3>
<5>[ 1522.053078] md/raid1:md1: not clean -- starting background reconstruction
<6>[ 1522.062275] md/raid1:md1: active with 2 out of 2 mirrors
<6>[ 1522.072310] md1: detected capacity change from 0 to 5990981238784
<6>[ 1522.088587] md: resync of RAID array md1
<6>[ 1522.092556] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[ 1522.098522] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
<6>[ 1522.107996] md: Resyncing started: md1
<6>[ 1522.111788] md: using 128k window, over a total of 5850567616k.
<6>[ 1522.652323]  md1: unknown partition table
<6>[ 1555.322099] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<4>[ 1556.086266] EXT4-fs (device dm-1): ext4lazyinit start (start from 0, total 44189)
<4>[ 1560.465376] EXT4-fs (device dm-1): ext4lazyinit exit1
<6>[ 1560.470511] EXT4-fs (dm-1): re-mounted. Opts: (null)
<6>[ 1560.573223] EXT4-fs (dm-1): re-mounted. Opts: (null)
<4>[ 1560.926266] EXT4-fs (device dm-1): ext4lazyinit start (start from 215, total 43974)
<6>[ 1655.232103] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<4>[ 2238.126268] EXT4-fs (device dm-1): ext4lazyinit finish
<6>[ 3534.086445] PHY: comcerto-0:06 - Link is Down
<6>[ 3535.086519] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[15442.692188] rule type=1, num=4
<6>[15506.785708] Bluetooth: Core ver 2.16
<6>[15506.789382] NET: Registered protocol family 31
<6>[15506.793844] Bluetooth: HCI device and connection manager initialized
<6>[15506.800243] Bluetooth: HCI socket layer initialized
<6>[15506.805151] Bluetooth: L2CAP socket layer initialized
<6>[15506.810235] Bluetooth: SCO socket layer initialized
<6>[15506.882076] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[15506.887823] usbcore: registered new interface driver btusb
<6>[15506.910558] Bluetooth: RFCOMM TTY layer initialized
<6>[15506.915507] Bluetooth: RFCOMM socket layer initialized
<6>[15506.920670] Bluetooth: RFCOMM ver 1.11
<6>[15643.027609] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:11 across:17965052k 
<5>[22101.902654] UBI: attaching mtd6 to ubi2
<5>[22101.906755] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22101.913041] UBI: logical eraseblock size:    126976 bytes
<5>[22101.918469] UBI: smallest flash I/O unit:    2048
<5>[22101.923652] UBI: VID header offset:          2048 (aligned 2048)
<5>[22101.931639] UBI: data offset:                4096
<5>[22102.040687] UBI: max. sequence number:       208
<5>[22102.056203] UBI: attached mtd6 to ubi2
<5>[22102.059969] UBI: MTD device name:            "config"
<5>[22102.065057] UBI: MTD device size:            15 MiB
<5>[22102.069947] UBI: number of good PEBs:        120
<5>[22102.074574] UBI: number of bad PEBs:         0
<5>[22102.079044] UBI: number of corrupted PEBs:   0
<5>[22102.083504] UBI: max. allowed volumes:       128
<5>[22102.088173] UBI: wear-leveling threshold:    4096
<5>[22102.092906] UBI: number of internal volumes: 1
<5>[22102.097387] UBI: number of user volumes:     1
<5>[22102.101857] UBI: available PEBs:             0
<5>[22102.106334] UBI: total number of reserved PEBs: 120
<5>[22102.111235] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22102.117265] UBI: max/mean erase counter: 3/2
<5>[22102.121546] UBI: image sequence number:  1872325126
<5>[22102.126469] UBI: background thread "ubi_bgt2d" started, PID 26647
<5>[22102.273783] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22102.281880] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22102.290274] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22102.299566] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22102.306486] UBIFS: default compressor: lzo
<5>[22102.310756] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22102.690645] UBIFS: un-mount UBI device 2, volume 0
<5>[22102.763922] UBI: mtd6 is detached from ubi2
<5>[43702.552583] UBI: attaching mtd6 to ubi2
<5>[43702.556760] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[43702.563458] UBI: logical eraseblock size:    126976 bytes
<5>[43702.569091] UBI: smallest flash I/O unit:    2048
<5>[43702.573813] UBI: VID header offset:          2048 (aligned 2048)
<5>[43702.581443] UBI: data offset:                4096
<5>[43702.703014] UBI: max. sequence number:       209
<5>[43702.738100] UBI: attached mtd6 to ubi2
<5>[43702.743843] UBI: MTD device name:            "config"
<5>[43702.749957] UBI: MTD device size:            15 MiB
<5>[43702.757086] UBI: number of good PEBs:        120
<5>[43702.762125] UBI: number of bad PEBs:         0
<5>[43702.766597] UBI: number of corrupted PEBs:   0
<5>[43702.771052] UBI: max. allowed volumes:       128
<5>[43702.775704] UBI: wear-leveling threshold:    4096
<5>[43702.780420] UBI: number of internal volumes: 1
<5>[43702.784883] UBI: number of user volumes:     1
<5>[43702.789338] UBI: available PEBs:             0
<5>[43702.793792] UBI: total number of reserved PEBs: 120
<5>[43702.798693] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[43702.804723] UBI: max/mean erase counter: 3/2
<5>[43702.809003] UBI: image sequence number:  1872325126
<5>[43702.813906] UBI: background thread "ubi_bgt2d" started, PID 5421
<5>[43702.932378] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[43702.938437] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[43702.946043] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[43702.953372] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[43702.959227] UBIFS: default compressor: lzo
<5>[43702.963334] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[43703.178529] UBIFS: un-mount UBI device 2, volume 0
<5>[43703.254872] UBI: mtd6 is detached from ubi2
<6>[50672.908777] md: md1: resync done.
<6>[50672.912114] md: Resyncing done: md1
<7>[50673.335181] RAID1 conf printout:
<7>[50673.335189]  --- wd:2 rd:2
<7>[50673.335197]  disk 0, wo:0, o:1, dev:sda3
<7>[50673.335203]  disk 1, wo:0, o:1, dev:sdb3
<5>[65302.604191] UBI: attaching mtd6 to ubi2
<5>[65302.608102] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[65302.614395] UBI: logical eraseblock size:    126976 bytes
<5>[65302.619839] UBI: smallest flash I/O unit:    2048
<5>[65302.624557] UBI: VID header offset:          2048 (aligned 2048)
<5>[65302.630585] UBI: data offset:                4096
<5>[65302.738243] UBI: max. sequence number:       210
<5>[65302.753510] UBI: attached mtd6 to ubi2
<5>[65302.757295] UBI: MTD device name:            "config"
<5>[65302.762415] UBI: MTD device size:            15 MiB
<5>[65302.767323] UBI: number of good PEBs:        120
<5>[65302.771952] UBI: number of bad PEBs:         0
<5>[65302.776413] UBI: number of corrupted PEBs:   0
<5>[65302.780867] UBI: max. allowed volumes:       128
<5>[65302.785499] UBI: wear-leveling threshold:    4096
<5>[65302.790214] UBI: number of internal volumes: 1
<5>[65302.794676] UBI: number of user volumes:     1
<5>[65302.799131] UBI: available PEBs:             0
<5>[65302.803585] UBI: total number of reserved PEBs: 120
<5>[65302.808479] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[65302.814507] UBI: max/mean erase counter: 3/2
<5>[65302.818793] UBI: image sequence number:  1872325126
<5>[65302.823696] UBI: background thread "ubi_bgt2d" started, PID 27263
<5>[65302.941848] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[65302.947898] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[65302.955499] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[65302.962829] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[65302.968687] UBIFS: default compressor: lzo
<5>[65302.972795] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[65303.174847] UBIFS: un-mount UBI device 2, volume 0
<5>[65303.231000] UBI: mtd6 is detached from ubi2
[Diagnostic] Mon Feb 10 13:19:11 CET 2020, 504.49
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000180] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060215] Mount-cache hash table entries: 512
<6>[    0.060706] Initializing cgroup subsys cpuacct
<6>[    0.060734] Initializing cgroup subsys devices
<6>[    0.060769] CPU: Testing write buffer coherency: ok
<6>[    0.060930] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060953] Calibrating local timer... 299.86MHz.
<4>[    0.120061]  Creating cpu1_hotplug_thread....
<4>[    0.120148]  cpu1_hotplug_thread Created
<6>[    0.120165] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121561] CPU1: Booted secondary processor
<6>[    0.180037] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180088] Brought up 2 CPUs
<6>[    0.180101] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180826] devtmpfs: initialized
<6>[    0.182260] xor: measuring software checksum speed
<6>[    0.229991]    arm4regs  :  2128.400 MB/sec
<6>[    0.279966]    8regs     :  1437.600 MB/sec
<6>[    0.329940]    32regs    :  1409.600 MB/sec
<6>[    0.329947] xor: using function: arm4regs (2128.400 MB/sec)
<6>[    0.330126] NET: Registered protocol family 16
<6>[    0.330596] L310 cache controller enabled
<6>[    0.330608] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330687] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330692] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330707] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330714] ARMv7 AUX CTRL(1): 0x41
<6>[    0.331226] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331234] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331250] Power Management Mode Support For C2000: 
<6>[    0.331559] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.344444] PCIe0: Link Up Success 
<6>[    0.344451] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.344456] comcerto_pcie_rc_int_init
<6>[    0.344498] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338194] PCIe1: Link Up Failed 
<7>[    4.338317] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338377] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338392] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338512] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338609] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338620] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338632] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350032] bio: create slab <bio-0> at 0
<4>[    4.519828] raid6: int32x1     25 MB/s
<4>[    4.688080] raid6: int32x2     48 MB/s
<4>[    4.858519] raid6: int32x4     82 MB/s
<4>[    5.028414] raid6: int32x8    113 MB/s
<4>[    5.028419] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028592] vgaarb: loaded
<5>[    5.028886] SCSI subsystem initialized
<7>[    5.029023] libata version 3.00 loaded.
<6>[    5.029207] usbcore: registered new interface driver usbfs
<6>[    5.029279] usbcore: registered new interface driver hub
<6>[    5.029370] usbcore: registered new device driver usb
<6>[    5.029603] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030040] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030425] Switching to clocksource timer2
<5>[    5.030640] FS-Cache: Loaded
<6>[    5.030766] CacheFiles: Loaded
<6>[    5.031658] NET: Registered protocol family 2
<6>[    5.031859] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032476] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032658] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032816] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032823] TCP reno registered
<6>[    5.032831] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032861] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033125] NET: Registered protocol family 1
<6>[    5.033413] RPC: Registered named UNIX socket transport module.
<6>[    5.033420] RPC: Registered udp transport module.
<6>[    5.033425] RPC: Registered tcp transport module.
<6>[    5.033430] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033453] PCI: CLS 32 bytes, default 32
<6>[    6.071501] membuf_init: created membuf device(253, 0)
<6>[    6.071798] audit: initializing netlink socket (disabled)
<5>[    6.071822] type=2000 audit(6.070:1): initialized
<5>[    6.072809] VFS: Disk quotas dquot_6.5.2
<4>[    6.072951] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073520] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.073788] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074440] fuse init (API version 7.17)
<6>[    6.074637] msgmni has been set to 932
<6>[    6.076346] async_tx: api initialized (async)
<6>[    6.076456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076467] io scheduler noop registered
<6>[    6.076472] io scheduler deadline registered
<6>[    6.076527] io scheduler cfq registered (default)
<6>[    6.076833] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.375109] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025687] console [ttyS0] enabled
<6>[    7.135071] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231810] brd: module loaded
<6>[    7.321057] loop: module loaded
<6>[    7.325586] nbd: registered device at major 43
<6>[    7.335330] SCSI Media Changer driver v0.25 
<7>[    7.339717] ahci 0000:00:00.0: version 3.0
<4>[    7.339735] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345492] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352523] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.358060] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.366187] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.375245] scsi0 : ahci
<6>[    7.378153] scsi1 : ahci
<6>[    7.380874] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.388206] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395674] SATA Serdes: 48Mhz ref clk
<6>[    7.399918] Serdes2: Lane OK Passed
<4>[    7.403434] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.408120] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415896] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.424479] scsi2 : ahci_platform
<6>[    7.428021] scsi3 : ahci_platform
<6>[    7.431511] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.439452] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.448295] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457663] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465571] Fixed MDIO Bus: probed
<6>[    7.469035] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.673225] Core Release: 2.81a
<4>[    7.676376] Setting default values for core params
<6>[    7.790467] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.795924] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.880961] Using Buffer DMA mode
<4>[    7.884285] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.890131] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895723] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.900122] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904929] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904944] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904968] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.912066] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.917455] Init: Port Power? op_state=1
<4>[    7.921395] Init: Power Port (0)
<7>[    7.924662] usb usb1: default language 0x0409
<7>[    7.924680] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931503] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938745] usb usb1: Product: DWC OTG Controller
<6>[    7.940477] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.949677] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.955020] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.959408] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.966231] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.973813] usb usb1: usb_probe_device
<7>[    7.973823] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.973847] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.973937] hub 1-0:1.0: usb_probe_interface
<7>[    7.973945] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.973951] hub 1-0:1.0: USB hub found
<6>[    7.977734] hub 1-0:1.0: 1 port detected
<7>[    7.981689] hub 1-0:1.0: standalone hub
<7>[    7.981694] hub 1-0:1.0: ganged power switching
<7>[    7.981700] hub 1-0:1.0: individual port over-current protection
<7>[    7.981706] hub 1-0:1.0: Single TT
<7>[    7.981712] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.981719] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.981742] hub 1-0:1.0: local power source is good
<7>[    7.981749] hub 1-0:1.0: enabling power on all ports
<6>[    7.981755] ata1.00: configured for UDMA/133
<5>[    7.982141] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    7.982155] ata1.00: set queue depth = 31
<4>[    7.982324] Check proc_name[ahci].
<5>[    7.982622] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    7.982965] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    7.982973] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    7.983166] sd 0:0:0:0: [sda] Write Protect is off
<7>[    7.983174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    7.983237] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<7>[    8.034237] drivers/usb/core/inode.c: creating file '001'
<7>[    8.034415] Module dwc_common_port init
<6>[    8.034612] mousedev: PS/2 mouse device common for all mice
<6>[    8.040397] i2c /dev entries driver
<4>[    8.044018] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.051862] comcerto_wdt: support registered
<6>[    8.056178] md: linear personality registered for level -1
<6>[    8.061732] md: raid0 personality registered for level 0
<6>[    8.067093] md: raid1 personality registered for level 1
<6>[    8.072457] md: raid10 personality registered for level 10
<6>[    8.077981] md: raid6 personality registered for level 6
<6>[    8.083342] md: raid5 personality registered for level 5
<6>[    8.083589]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.092783] md: raid4 personality registered for level 4
<5>[    8.093426] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.102741] md: multipath personality registered for level -4
<6>[    8.108839] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.117362] dm_crypt using the OCF for crypto acceleration.
<6>[    8.123139] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.128642] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.135205] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.140472] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.140476] 
<6>[    8.150313] device-mapper: multipath service-time: version 0.2.0 loaded
<7>[    8.157210] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.160865] ALSA device list:
<6>[    8.163844]   No soundcards found.
<6>[    8.167885] TCP cubic registered
<6>[    8.171141] NET: Registered protocol family 17
<6>[    8.175623] NET: Registered protocol family 15
<6>[    8.180078] Initializing NETLINK_KEY socket
<6>[    8.184299] NET: Registered protocol family 5
<6>[    8.188756] lib80211: common routines for IEEE802.11 drivers
<7>[    8.194441] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.194447] Registering the dns_resolver key type
<6>[    8.199192] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.206896] Clocks: disabled unused pll2
<6>[    8.210838] Clocks: disabled unused uart
<6>[    8.214770] Clocks: disabled unused gemtx
<6>[    8.218789] Clocks: disabled unused ipsec_spacc
<6>[    8.223334] Clocks: disabled unused dpi_cie
<6>[    8.227528] Clocks: disabled unused dpi_decomp
<6>[    8.231986] Clocks: disabled unused ntgref
<6>[    8.236093] Clocks: disabled unused pcie1
<6>[    8.240111] Clocks: disabled unused usb1
<6>[    8.244047] Clocks: disabled unused ext_phy0
<6>[    8.248327] Clocks: disabled unused ext_phy1
<6>[    8.252610] Clocks: disabled unused ext_phy2
<6>[    8.256889] Clocks: disabled unused tpi
<6>[    8.260737] Clocks: disabled unused csys
<6>[    8.264669] Clocks: disabled unused tsuntg
<6>[    8.268774] Clocks: disabled unused sata_occ
<6>[    8.273062] Clocks: disabled unused pcie_occ
<6>[    8.277341] Clocks: disabled unused sgmii_occ
<7>[    8.290511] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290535] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290540] 
<7>[    8.299026] hub 1-0:1.0: over-current change on port 1
<7>[    8.400475] hub 1-0:1.0: enabling power on all ports
<4>[    8.475065] Registering CPUFreq(comcerto)
<4>[    8.479374] Please be patient, while OpenWrt loads ...
<6>[    8.530478] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.537294] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.544134] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.552034] ata2.00: configured for UDMA/133
<5>[    8.556687] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.564837] ata2.00: set queue depth = 31
<4>[    8.569052] Check proc_name[ahci].
<5>[    8.572687] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.580559] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.585908] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.586046] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.586055] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.586120] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.635338]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.640776] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.662949] Freeing init memory: 13476K
<6>[    9.180627] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.187361] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.446620] RTC_TIME:Mon Feb 10 13:10:57 2020  0.000000 seconds
<6>[    9.470519] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.475171] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.481146] Creating 2 MTD partitions on "spi0.0":
<5>[    9.485953] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.491729] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.502057] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.509143] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.514334] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.522976] Using default values for hw ecc
<4>[    9.530594] Bad block table not found for chip 0
<4>[    9.538594] Bad block table not found for chip 0
<6>[    9.543228] Scanning device for bad blocks
<4>[    9.548372] Bad eraseblock 18 at 0x000000240000
<4>[    9.555856] Bad eraseblock 72 at 0x000000900000
<4>[    9.575522] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.581837] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.612691] Bad eraseblock 863 at 0x000006be0000
<4>[    9.638314] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.658047] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.805801] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.815316] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.821631] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.828089] Creating 5 MTD partitions on "comcertonand":
<5>[    9.833428] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.839705] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.846077] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.852274] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.858615] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.871626] usbcore: registered new interface driver usbhid
<6>[    9.877216] usbhid: USB HID core driver
<6>[    9.886725] usbcore: registered new interface driver usblp
<6>[    9.899294] ## xhci_plat_probe
<6>[    9.902400] ### comcerto_start_xhci
<6>[    9.905908] USB3.0 clock selected: internal
<6>[    9.913355] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.918266] drivers/usb/core/inode.c: creating file '002'
<6>[    9.918287] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.925515] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.930888] usb usb2: default language 0x0409
<7>[    9.930906] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.930913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.937720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.944971] usb usb2: Product: xHCI Host Controller
<6>[    9.949861] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.955278] usb usb2: SerialNumber: xhci-hcd
<7>[    9.959820] usb usb2: usb_probe_device
<7>[    9.959829] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.959840] xHCI xhci_add_endpoint called for root hub
<7>[    9.959847] xHCI xhci_check_bandwidth called for root hub
<7>[    9.959867] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.959961] hub 2-0:1.0: usb_probe_interface
<7>[    9.959968] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.959975] hub 2-0:1.0: USB hub found
<6>[    9.963767] hub 2-0:1.0: 1 port detected
<7>[    9.967700] hub 2-0:1.0: standalone hub
<7>[    9.967705] hub 2-0:1.0: no power switching (usb 1.0)
<7>[    9.967711] hub 2-0:1.0: individual port over-current protection
<7>[    9.967717] hub 2-0:1.0: Single TT
<7>[    9.967723] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    9.967730] hub 2-0:1.0: power on to power good time: 20ms
<7>[    9.967744] hub 2-0:1.0: local power source is good
<7>[    9.967751] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[    9.967902] drivers/usb/core/inode.c: creating file '001'
<6>[    9.967976] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.972906] drivers/usb/core/inode.c: creating file '003'
<6>[    9.972922] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[    9.980018] usb usb3: skipped 1 descriptor after endpoint
<7>[    9.980029] usb usb3: default language 0x0409
<7>[    9.980047] usb usb3: udev 1, busnum 3, minor = 256
<6>[    9.980054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[    9.986878] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.994131] usb usb3: Product: xHCI Host Controller
<6>[    9.999022] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.004439] usb usb3: SerialNumber: xhci-hcd
<7>[   10.008951] usb usb3: usb_probe_device
<7>[   10.008960] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.008970] xHCI xhci_add_endpoint called for root hub
<7>[   10.008975] xHCI xhci_check_bandwidth called for root hub
<7>[   10.008994] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.009079] hub 3-0:1.0: usb_probe_interface
<7>[   10.009087] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.009093] hub 3-0:1.0: USB hub found
<6>[   10.012881] hub 3-0:1.0: 1 port detected
<7>[   10.016814] hub 3-0:1.0: standalone hub
<7>[   10.016819] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.016825] hub 3-0:1.0: individual port over-current protection
<7>[   10.016832] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.016839] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.016852] hub 3-0:1.0: local power source is good
<7>[   10.016859] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.017005] drivers/usb/core/inode.c: creating file '001'
<6>[   10.024476] Initializing USB Mass Storage driver...
<6>[   10.029475] usbcore: registered new interface driver usb-storage
<6>[   10.035521] USB Mass Storage support registered.
<7>[   10.060511] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.110539] hub 3-0:1.0: port 1: status 0203 change 0031
<7>[   10.160991] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.161027] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.280528] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.302981] usb 2-1: default language 0x0409
<7>[   10.303500] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.303510] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.310239] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.317425] usb 2-1: Product: USB2.0 Hub
<6>[   10.321372] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.326195] usb 2-1: usb_probe_device
<7>[   10.326207] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.332109] usb 2-1: Successful Endpoint Configure command
<7>[   10.332348] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.332502] hub 2-1:1.0: usb_probe_interface
<7>[   10.332513] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.332523] hub 2-1:1.0: USB hub found
<6>[   10.336571] hub 2-1:1.0: 4 ports detected
<7>[   10.340639] hub 2-1:1.0: standalone hub
<7>[   10.340650] hub 2-1:1.0: individual port power switching
<7>[   10.340659] hub 2-1:1.0: individual port over-current protection
<7>[   10.364059] usb 2-1: Successful Endpoint Configure command
<7>[   10.364352] hub 2-1:1.0: TT per port
<7>[   10.364361] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.364368] hub 2-1:1.0: Port indicators are supported
<7>[   10.364375] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.364628] usb 2-1: Successful Endpoint Configure command
<7>[   10.364828] hub 2-1:1.0: local power source is good
<7>[   10.364836] hub 2-1:1.0: enabling power on all ports
<7>[   10.365707] drivers/usb/core/inode.c: creating file '002'
<7>[   10.365802] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.365824] hub 3-0:1.0: reset change on port 1
<7>[   10.365838] hub 3-0:1.0: port 1, status 0203, change 0010, 5.0 Gb/s
<4>[   10.420245] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.426669] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.461163] hub 2-1:1.0: port 3: status 0301 change 0001
<4>[   10.468276] flashcache: flashcache-1.0-dummy initialized
<6>[   10.480648] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.502422] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.502599] usb 3-1: default language 0x0409
<7>[   10.503134] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.503142] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.509873] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.517058] usb 3-1: Product: USB3.0 Hub
<6>[   10.521010] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.525829] usb 3-1: usb_probe_device
<7>[   10.525840] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.540017] usb 3-1: Successful Endpoint Configure command
<7>[   10.540195] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.540593] hub 3-1:1.0: usb_probe_interface
<7>[   10.540601] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.540610] hub 3-1:1.0: USB hub found
<6>[   10.544653] hub 3-1:1.0: 4 ports detected
<7>[   10.548675] hub 3-1:1.0: standalone hub
<7>[   10.548680] hub 3-1:1.0: individual port power switching
<7>[   10.548686] hub 3-1:1.0: individual port over-current protection
<7>[   10.548694] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.548701] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.548882] usb 3-1: Successful Endpoint Configure command
<7>[   10.549024] hub 3-1:1.0: local power source is good
<7>[   10.549137] hub 3-1:1.0: enabling power on all ports
<7>[   10.549872] drivers/usb/core/inode.c: creating file '002'
<7>[   10.560503] hub 2-1:1.0: state 7 ports 4 chg 0008 evt 0000
<7>[   10.560709] hub 2-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
<5>[   10.637943] UBI: attaching mtd3 to ubi0
<6>[   10.640937] usb 2-1.3: new low-speed USB device number 3 using xhci-hcd
<5>[   10.648440] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.654729] UBI: logical eraseblock size:    126976 bytes
<5>[   10.660141] UBI: smallest flash I/O unit:    2048
<7>[   10.664674] usb 2-1.3: skipped 1 descriptor after interface
<5>[   10.664862] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.665224] usb 2-1.3: default language 0x0409
<5>[   10.670887] UBI: data offset:                4096
<7>[   10.672087] usb 2-1.3: udev 3, busnum 2, minor = 130
<6>[   10.672094] usb 2-1.3: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.672101] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.672108] usb 2-1.3: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.672113] usb 2-1.3: Manufacturer: American Power Conversion
<6>[   10.672119] usb 2-1.3: SerialNumber: 3B1524X23300  
<7>[   10.707818] usb 2-1.3: usb_probe_device
<7>[   10.707828] usb 2-1.3: configuration #1 chosen from 1 choice
<4>[   10.707894] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.748008] usb 2-1.3: Successful Endpoint Configure command
<7>[   10.748700] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
<7>[   10.748823] usbhid 2-1.3:1.0: usb_probe_interface
<7>[   10.748831] usbhid 2-1.3:1.0: usb_probe_interface - got id
<7>[   11.075385] usbhid 2-1.3:1.0: looking for a minor, starting at 96
<6>[   11.075551] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.3/input0
<7>[   11.091156] drivers/usb/core/inode.c: creating file '003'
<7>[   11.091239] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.183423] UBI: max. sequence number:       2
<5>[   12.200208] UBI: attached mtd3 to ubi0
<5>[   12.203982] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.209655] UBI: MTD device size:            216 MiB
<5>[   12.214638] UBI: number of good PEBs:        1723
<5>[   12.219353] UBI: number of bad PEBs:         5
<5>[   12.223812] UBI: number of corrupted PEBs:   0
<5>[   12.228266] UBI: max. allowed volumes:       128
<5>[   12.232898] UBI: wear-leveling threshold:    4096
<5>[   12.237613] UBI: number of internal volumes: 1
<5>[   12.242074] UBI: number of user volumes:     1
<5>[   12.246528] UBI: available PEBs:             0
<5>[   12.250987] UBI: total number of reserved PEBs: 1723
<5>[   12.255963] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.262077] UBI: max/mean erase counter: 22/14
<5>[   12.266531] UBI: image sequence number:  1535285440
<5>[   12.271441] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.387665] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.393792] UBIFS: mounted read-only
<5>[   12.397379] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.405415] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.412751] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.418599] UBIFS: default compressor: lzo
<5>[   12.422710] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.894677] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.949574] UBI: mtd3 is detached from ubi0
<6>[   33.962561] usbcore: registered new interface driver usbserial
<6>[   33.968414] usbserial: USB Serial Driver core
<6>[   33.978366] USB Serial support registered for pl2303
<6>[   33.983442] usbcore: registered new interface driver pl2303
<6>[   33.989029] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.000864] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.014565] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.020976] Disabling lock debugging due to kernel taint
<5>[   34.047374] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.047380] NTFSJ support included
<5>[   34.047382] exFAT support included
<5>[   34.047384] Hfs+J support included
<5>[   34.047386] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.074619] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.079076] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.352007] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.361368] udev: starting version 140
<6>[   34.368144] pfe_module_init
<6>[   34.371029] pfe_platform_probe
<6>[   34.375127] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.380955] pfe_probe
<6>[   34.383232] PFE Driver version:
<6>[   34.383234] pfe_ctrl_10_00_4
<6>[   34.383236] built with pfe sources version: pfe_10_00_3
<6>[   34.394506] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.404104] pfe_hw_init
<6>[   34.406555] CLASS version: 20
<6>[   34.409528] TMU version: 1011231
<6>[   34.412767] BMU1 version: 21
<6>[   34.415653] BMU2 version: 21
<6>[   34.418539] EMAC1 network cfg: 80000
<6>[   34.422126] EMAC2 network cfg: 80000
<6>[   34.425710] EMAC3 network cfg: 80000
<6>[   34.429292] EGPI1 version: 50
<6>[   34.432270] EGPI2 version: 50
<6>[   34.435243] EGPI3 version: 50
<6>[   34.438217] HGPI version: 50
<6>[   34.441107] GPT version: 0
<6>[   34.443820] HIF version: 10
<6>[   34.446618] HIF NOPCY version: 10
<6>[   34.449940] UTIL version: 20
<6>[   34.452831] bmu_init(1) done
<6>[   34.455718] bmu_init(2) done
<6>[   34.465072] class_init() done
<6>[   34.468050] tmu_init: mem init
<6>[   34.471114] tmu_init: lmem init
<6>[   34.474307] tmu_init() done
<6>[   34.477106] util_init() done
<6>[   34.479994] gpi_init(1) done
<6>[   34.482888] gpi_init(2) done
<6>[   34.485776] gpi_init(3) done
<6>[   34.488664] gpi_init(hif) done
<6>[   34.491729] bmu_enable(1) done
<6>[   34.494790] bmu_enable(2) done
<6>[   34.497850] pfe_hif_lib_init
<6>[   34.500911] pfe_hif_init
<6>[   34.503450] pfe_hif_alloc_descr
<6>[   34.506698] pfe_hif_init_buffers
<6>[   34.510055] pfe_firmware_init
<6>[   34.672213] pfe_load_elf
<3>[   34.674768] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.706233] PFE binary version: pfe_10_00_3
<6>[   34.710433] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.716901] pfe_load_elf
<6>[   34.720828] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.726154] pfe_load_elf
<6>[   34.730488] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.736027] pfe_ctrl_init
<6>[   34.756770] pfe_ctrl_init finished
<6>[   34.756776] pfe_ctrl_timer
<6>[   34.762908] pfe_eth_init
<6>[   34.774253] Comcerto MDIO Bus: probed
<6>[   34.779200] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.787752] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.794615] pfe_vwd_init
<6>[   34.797256] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.802259] pfe_vwd_driver_init: start
<4>[   34.806024] pfe_vwd_up: start
<6>[   34.809067] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.816159] pfe_vwd_driver_init: end
<6>[   34.819745] pfe_pcap_init
<6>[   34.862095] eth0: pfe_eth_open
<6>[   34.865315] hif_process_client_req: register client_id 0
<6>[   34.870660] pfe_hif_client_register
<6>[   34.874194] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.882503] eth0: pfe_gemac_init
<6>[   34.908510] eth0: pfe_eth_close
<6>[   34.940602] hif_lib_client_unregister : client: 9f3403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.950024] hif_process_client_req: unregister client_id 0
<6>[   34.955534] pfe_hif_client_unregister
<6>[   34.959637] eth1: pfe_eth_open
<6>[   34.962836] hif_process_client_req: register client_id 1
<6>[   34.968161] pfe_hif_client_register
<6>[   34.971671] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.979959] eth1: pfe_gemac_init
<6>[   34.983824] eth1: pfe_eth_close
<6>[   35.020462] hif_lib_client_unregister : client: 9e1403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.029882] hif_process_client_req: unregister client_id 1
<6>[   35.035387] pfe_hif_client_unregister
<6>[   35.535792] kjournald starting.  Commit interval 5 seconds
<6>[   35.541341] EXT3-fs (sda1): using internal journal
<6>[   35.546148] EXT3-fs (sda1): recovery complete
<6>[   35.557568] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.951304] kjournald starting.  Commit interval 5 seconds
<6>[   35.956835] EXT3-fs (sda1): using internal journal
<6>[   35.961664] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.513994] kjournald starting.  Commit interval 5 seconds
<6>[   36.519527] EXT3-fs (sdb1): using internal journal
<6>[   36.524345] EXT3-fs (sdb1): recovery complete
<6>[   36.535769] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.857090] md: md9 stopped.
<6>[   36.862643] md: bind<sdb1>
<6>[   36.865678] md: bind<sda1>
<6>[   36.871449] bio: create slab <bio-1> at 1
<6>[   36.875665] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.881276] created bitmap (1 pages) for device md9
<6>[   36.886349] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.913468] md9: detected capacity change from 0 to 542769152
<6>[   37.973129]  md9: unknown partition table
<6>[   38.141325] kjournald starting.  Commit interval 5 seconds
<6>[   38.150663] EXT3-fs (md9): using internal journal
<6>[   38.155388] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.425984] md: md13 stopped.
<6>[   38.435111] md: bind<sdb4>
<6>[   38.438132] md: bind<sda4>
<6>[   38.444016] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.449677] created bitmap (1 pages) for device md13
<6>[   38.454880] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.501096] md13: detected capacity change from 0 to 469893120
<4>[   55.404465] set stripe cache size 1024
<4>[   55.408803] STRIPE_CACHE_SIZE is 1024
<6>[   56.433604] md: bind<sda2>
<6>[   56.439338] md: bind<sdb2>
<6>[   56.445178] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   56.450882] created bitmap (1 pages) for device md256
<6>[   56.456155] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   56.489473] md256: detected capacity change from 0 to 542834688
<6>[   56.562927]  md256: unknown partition table
<6>[   56.632869] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   57.077106] md: bind<sda5>
<6>[   57.080054] md: bind<sdb5>
<6>[   57.085932] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   57.091645] created bitmap (1 pages) for device md322
<6>[   57.096956] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   57.122304] md322: detected capacity change from 0 to 7408779264
<6>[   57.184495]  md322: unknown partition table
<6>[   57.256059] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   57.668823]  md13: unknown partition table
<6>[   57.903930] md: md1 stopped.
<6>[   57.918771] md: bind<sdb3>
<6>[   57.921839] md: bind<sda3>
<6>[   57.927653] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   57.933099] md1: detected capacity change from 0 to 5990981238784
<6>[   58.003515]  md1: unknown partition table
<7>[   70.383171] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749675
<7>[   70.383273] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749671
<7>[   70.383329] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749670
<7>[   70.383369] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749669
<7>[   70.383407] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749668
<6>[   70.383438] EXT4-fs (dm-0): 5 orphan inodes deleted
<6>[   70.471711] EXT4-fs (dm-0): recovery complete
<6>[   70.477477] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[   79.133508] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   82.987522] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   84.031898] [S30mountall] start
<5>[   84.471491] UBI: attaching mtd3 to ubi0
<5>[   84.475344] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   84.481646] UBI: logical eraseblock size:    126976 bytes
<5>[   84.487059] UBI: smallest flash I/O unit:    2048
<5>[   84.491795] UBI: VID header offset:          2048 (aligned 2048)
<5>[   84.497816] UBI: data offset:                4096
<5>[   85.993877] UBI: max. sequence number:       2
<5>[   86.010788] UBI: attached mtd3 to ubi0
<5>[   86.014554] UBI: MTD device name:            "boot1_rootfs2"
<5>[   86.020228] UBI: MTD device size:            216 MiB
<5>[   86.025224] UBI: number of good PEBs:        1723
<5>[   86.029940] UBI: number of bad PEBs:         5
<5>[   86.034401] UBI: number of corrupted PEBs:   0
<5>[   86.038855] UBI: max. allowed volumes:       128
<5>[   86.043497] UBI: wear-leveling threshold:    4096
<5>[   86.048212] UBI: number of internal volumes: 1
<5>[   86.052672] UBI: number of user volumes:     1
<5>[   86.057125] UBI: available PEBs:             0
<5>[   86.061582] UBI: total number of reserved PEBs: 1723
<5>[   86.066558] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   86.072671] UBI: max/mean erase counter: 22/14
<5>[   86.077126] UBI: image sequence number:  1535285440
<5>[   86.082031] UBI: background thread "ubi_bgt0d" started, PID 1624
<5>[   86.212287] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   86.218401] UBIFS: mounted read-only
<5>[   86.222000] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   86.230026] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   86.237360] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   86.243212] UBIFS: default compressor: lzo
<5>[   86.247319] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  107.536751] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.586651] UBI: mtd3 is detached from ubi0
<5>[  108.069942] UBI: attaching mtd3 to ubi0
<5>[  108.073832] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  108.080116] UBI: logical eraseblock size:    126976 bytes
<5>[  108.085543] UBI: smallest flash I/O unit:    2048
<5>[  108.090260] UBI: VID header offset:          2048 (aligned 2048)
<5>[  108.096286] UBI: data offset:                4096
<5>[  109.587248] UBI: max. sequence number:       2
<5>[  109.604088] UBI: attached mtd3 to ubi0
<5>[  109.607853] UBI: MTD device name:            "boot1_rootfs2"
<5>[  109.613547] UBI: MTD device size:            216 MiB
<5>[  109.618523] UBI: number of good PEBs:        1723
<5>[  109.623244] UBI: number of bad PEBs:         5
<5>[  109.627699] UBI: number of corrupted PEBs:   0
<5>[  109.632158] UBI: max. allowed volumes:       128
<5>[  109.636785] UBI: wear-leveling threshold:    4096
<5>[  109.641504] UBI: number of internal volumes: 1
<5>[  109.645958] UBI: number of user volumes:     1
<5>[  109.650411] UBI: available PEBs:             0
<5>[  109.654868] UBI: total number of reserved PEBs: 1723
<5>[  109.659844] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  109.665957] UBI: max/mean erase counter: 22/14
<5>[  109.670412] UBI: image sequence number:  1535285440
<5>[  109.675316] UBI: background thread "ubi_bgt0d" started, PID 1754
<5>[  109.797611] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  109.803737] UBIFS: mounted read-only
<5>[  109.807324] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  109.815356] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  109.822694] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  109.828541] UBIFS: default compressor: lzo
<5>[  109.832653] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  109.895923] UBIFS: un-mount UBI device 0, volume 0
<5>[  109.946496] UBI: mtd3 is detached from ubi0
<6>[  110.107508] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  129.435884] UBI: attaching mtd6 to ubi2
<5>[  129.439748] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  129.446065] UBI: logical eraseblock size:    126976 bytes
<5>[  129.451493] UBI: smallest flash I/O unit:    2048
<5>[  129.456212] UBI: VID header offset:          2048 (aligned 2048)
<5>[  129.462245] UBI: data offset:                4096
<5>[  129.776619] UBI: max. sequence number:       211
<5>[  129.803719] UBI: attached mtd6 to ubi2
<5>[  129.807484] UBI: MTD device name:            "config"
<5>[  129.812624] UBI: MTD device size:            15 MiB
<5>[  129.817544] UBI: number of good PEBs:        120
<5>[  129.822194] UBI: number of bad PEBs:         0
<5>[  129.826650] UBI: number of corrupted PEBs:   0
<5>[  129.831123] UBI: max. allowed volumes:       128
<5>[  129.835751] UBI: wear-leveling threshold:    4096
<5>[  129.840483] UBI: number of internal volumes: 1
<5>[  129.844941] UBI: number of user volumes:     1
<5>[  129.849396] UBI: available PEBs:             0
<5>[  129.853878] UBI: total number of reserved PEBs: 120
<5>[  129.858767] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  129.864804] UBI: max/mean erase counter: 3/2
<5>[  129.869085] UBI: image sequence number:  1872325126
<5>[  129.874670] UBI: background thread "ubi_bgt2d" started, PID 2210
<5>[  130.200992] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  130.207023] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  130.214632] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  130.221973] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  130.227832] UBIFS: default compressor: lzo
<5>[  130.231951] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  131.047960] UBIFS: un-mount UBI device 2, volume 0
<5>[  131.157802] UBI: mtd6 is detached from ubi2
<4>[  131.329862] [S30mountall] end
<4>[  131.333590] [S31init_hardware] start
<6>[  131.485808] sysinfo: Module loaded.
<6>[  132.198042] fnotify: Load file notify kernel module.
<6>[  133.524747] usbcore: registered new interface driver snd-usb-audio
<6>[  133.564285] usbcore: registered new interface driver snd-usb-caiaq
<6>[  133.585876] Linux video capture interface: v2.00
<6>[  133.633490] usbcore: registered new interface driver uvcvideo
<6>[  133.639259] USB Video Class driver (1.1.1)
<6>[  133.880938] NET: Registered protocol family 10
<4>[  136.834322] [S31init_hardware] end
<4>[  136.838295] [S32init_mac_addr] start
<6>[  137.481124] eth0: pfe_eth_open
<6>[  137.484324] hif_process_client_req: register client_id 1
<6>[  137.489650] pfe_hif_client_register
<6>[  137.493185] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  137.501495] eth0: pfe_gemac_init
<6>[  137.505310] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  138.108794] eth1: pfe_eth_open
<6>[  138.112039] hif_process_client_req: register client_id 0
<6>[  138.117366] pfe_hif_client_register
<6>[  138.120879] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  138.129168] eth1: pfe_gemac_init
<6>[  138.133065] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[  139.500706] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  139.506123] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  140.159777] [S32init_mac_addr] end
<4>[  140.163786] [S33sysinit] start
<7>[  151.150458] eth0: no IPv6 routers present
<5>[  161.272815] UBI: attaching mtd6 to ubi2
<5>[  161.276667] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  161.282967] UBI: logical eraseblock size:    126976 bytes
<5>[  161.288380] UBI: smallest flash I/O unit:    2048
<5>[  161.293104] UBI: VID header offset:          2048 (aligned 2048)
<5>[  161.299125] UBI: data offset:                4096
<5>[  161.406778] UBI: max. sequence number:       212
<5>[  161.422077] UBI: attached mtd6 to ubi2
<5>[  161.425844] UBI: MTD device name:            "config"
<5>[  161.430930] UBI: MTD device size:            15 MiB
<5>[  161.435820] UBI: number of good PEBs:        120
<5>[  161.440454] UBI: number of bad PEBs:         0
<5>[  161.444909] UBI: number of corrupted PEBs:   0
<5>[  161.449363] UBI: max. allowed volumes:       128
<5>[  161.453995] UBI: wear-leveling threshold:    4096
<5>[  161.458710] UBI: number of internal volumes: 1
<5>[  161.463171] UBI: number of user volumes:     1
<5>[  161.467625] UBI: available PEBs:             0
<5>[  161.472084] UBI: total number of reserved PEBs: 120
<5>[  161.476973] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  161.482998] UBI: max/mean erase counter: 3/2
<5>[  161.487278] UBI: image sequence number:  1872325126
<5>[  161.492184] UBI: background thread "ubi_bgt2d" started, PID 2861
<5>[  161.612036] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  161.618065] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  161.625669] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  161.633008] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  161.638857] UBIFS: default compressor: lzo
<5>[  161.642968] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  161.663106] UBIFS: un-mount UBI device 2, volume 0
<4>[  247.421077] [S33sysinit] end
<4>[  247.424551] [S34shutdown_check] start
<4>[  247.735170] [S34shutdown_check] end
<4>[  247.739232] [S35init_disk] start
<5>[  248.042832] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  248.048861] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  248.056469] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  248.063807] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  248.069655] UBIFS: default compressor: lzo
<5>[  248.073769] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  248.302620] UBIFS: un-mount UBI device 2, volume 0
<5>[  248.366717] UBI: mtd6 is detached from ubi2
<4>[  249.817411] [S35init_disk] end
<4>[  249.821252] [S40init_network] start
<4>[  249.844244] [S40init_network] end
<4>[  249.848179] [S42hostname] start
<4>[  250.329943] [S42hostname] end
<4>[  250.333685] [S45network] start
<5>[  260.397436] Bridge firewalling registered
<6>[  260.945211] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  260.952415] bonding: MII link monitoring set to 100 ms
<6>[  268.689428] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  277.655555] [S45network] end
<4>[  277.659172] [S46iSCSItrgt] start
<4>[  283.049979] [S46iSCSItrgt] end
<4>[  283.053714] [S46iscsiinit] start
<6>[  283.081863] Loading iSCSI transport class v2.0-870.
<5>[  283.111884] iscsi: registered transport (tcp)
<4>[  284.463907] [S46iscsiinit] end
<4>[  284.467526] [S55urandom] start
<4>[  284.499645] [S55urandom] end
<4>[  284.503246] [S56mariadb] start
<4>[  290.963260] [S56mariadb] end
<4>[  290.966728] [S56start_service] start
<4>[  291.049067] [S56start_service] end
<4>[  291.053151] [S57init_qpkg] start
<4>[  418.625706] [S57init_qpkg] end
<4>[  418.629315] [S57ldap] start
<4>[  418.668291] [S57ldap] end
<4>[  418.671504] [S58dbus] start
<4>[  420.912828] [S58dbus] end
<4>[  420.916030] [S58nsswitch] start
<4>[  421.102501] [S58nsswitch] end
<4>[  421.106028] [S58printer] start
<4>[  421.197572] [S58printer] end
<4>[  426.204976] [S59Qthttpd] start
<4>[  441.796501] [S59Qthttpd] end
<4>[  441.801481] [S62cupsd] start
<4>[  443.099872] [S62cupsd] end
<4>[  443.103167] [S62ntpd] start
<4>[  443.187031] [S62ntpd] end
<4>[  443.190172] [S62smb] start
<4>[  445.889733] ==== memory usage ====
<4>[  445.915834] MemTotal:         490756 kB
<4>[  445.919710] MemFree:           65292 kB
<4>[  445.923805] Buffers:           18760 kB
<4>[  445.927669] Cached:           282836 kB
<4>[  445.931608] SwapCached:          192 kB
<4>[  445.935475] Active:           124508 kB
<4>[  445.939338] Inactive:         248184 kB
<4>[  445.943283] Active(anon):      57560 kB
<4>[  445.947144] Inactive(anon):    68908 kB
<4>[  445.951034] Active(file):      66948 kB
<4>[  445.954893] Inactive(file):   179276 kB
<4>[  445.958749] Unevictable:        2012 kB
<4>[  445.962696] Mlocked:            2012 kB
<4>[  445.966558] SwapTotal:      24542452 kB
<4>[  445.970419] SwapFree:       24542160 kB
<4>[  445.974335] Dirty:               184 kB
<4>[  445.978220] Writeback:             0 kB
<4>[  445.982149] AnonPages:         72800 kB
<4>[  445.986009] Mapped:            18184 kB
<4>[  445.989865] Shmem:             55292 kB
<4>[  445.993752] Slab:              34404 kB
<4>[  445.997610] SReclaimable:      22380 kB
<4>[  446.001495] SUnreclaim:        12024 kB
<4>[  446.005353] KernelStack:        1872 kB
<4>[  446.009207] PageTables:         1600 kB
<4>[  446.013091] NFS_Unstable:          0 kB
<4>[  446.016950] Bounce:                0 kB
<4>[  446.020827] WritebackTmp:          0 kB
<4>[  446.024686] CommitLimit:    24787828 kB
<4>[  446.028541] Committed_AS:    1180604 kB
<4>[  446.032417] VmallocTotal:    1302528 kB
<4>[  446.036274] VmallocUsed:       61368 kB
<4>[  446.040137] VmallocChunk:    1212348 kB
<4>[  446.061660] Node 0, zone      DMA
<4>[  446.065014]   pages free     10969
<4>[  446.068437]         min      366
<4>[  446.080515]         low      457
<4>[  446.083772]         high     549
<4>[  446.087021]         scanned  0
<4>[  446.090095]         spanned  11264
<4>[  446.093581]         present  11154
<4>[  446.097006]     nr_free_pages 10969
<4>[  446.100554]     nr_inactive_anon 0
<4>[  446.103984]     nr_active_anon 0
<4>[  446.107233]     nr_inactive_file 0
<4>[  446.110681]     nr_active_file 0
<4>[  446.113931]     nr_unevictable 0
<4>[  446.117178]     nr_mlock     0
<4>[  446.120251]     nr_anon_pages 0
<4>[  446.123468]     nr_mapped    0
<4>[  446.126545]     nr_file_pages 0
<4>[  446.129709]     nr_dirty     0
<4>[  446.132813]     nr_writeback 0
<4>[  446.135889]     nr_slab_reclaimable 0
<4>[  446.139602]     nr_slab_unreclaimable 0
<4>[  446.143496]     nr_page_table_pages 0
<4>[  446.147182]     nr_kernel_stack 0
<4>[  446.150543]     nr_unstable  0
<4>[  446.153618]     nr_bounce    0
<4>[  446.156691]     nr_vmscan_write 0
<4>[  446.160027]     nr_vmscan_immediate_reclaim 0
<4>[  446.164503]     nr_writeback_temp 0
<4>[  446.168018]     nr_isolated_anon 0
<4>[  446.171471]     nr_isolated_file 0
<4>[  446.174896]     nr_shmem     0
<4>[  446.177969]     nr_dirtied   0
<4>[  446.181067]     nr_written   0
<4>[  446.184187]     nr_anon_transparent_hugepages 0
<4>[  446.188743]         protection: (0, 443, 443)
<4>[  446.193151]   pagesets
<4>[  446.195535]     cpu: 0
<4>[  446.197912]               count: 1
<4>[  446.201359]               high:  6
<4>[  446.204784]               batch: 1
<4>[  446.208219]   vm stats threshold: 4
<4>[  446.211754]     cpu: 1
<4>[  446.214132]               count: 5
<4>[  446.217558]               high:  6
<4>[  446.221011]               batch: 1
<4>[  446.224436]   vm stats threshold: 4
<4>[  446.227949]   all_unreclaimable: 0
<4>[  446.231397]   start_pfn:         0
<4>[  446.234825]   inactive_ratio:    1
<4>[  446.238253] Node 0, zone   Normal
<4>[  446.241612]   pages free     5354
<4>[  446.244951]         min      3729
<4>[  446.248285]         low      4661
<4>[  446.251644]         high     5593
<4>[  446.255023]         scanned  0
<4>[  446.258101]         spanned  119808
<4>[  446.261697]         present  113518
<4>[  446.265209]     nr_free_pages 5354
<4>[  446.268631]     nr_inactive_anon 17211
<4>[  446.272431]     nr_active_anon 14383
<4>[  446.276038]     nr_inactive_file 44825
<4>[  446.279810]     nr_active_file 16748
<4>[  446.283431]     nr_unevictable 503
<4>[  446.286854]     nr_mlock     503
<4>[  446.290107]     nr_anon_pages 18207
<4>[  446.293641]     nr_mapped    4550
<4>[  446.299220]     nr_file_pages 75465
<4>[  446.302817]     nr_dirty     46
<4>[  446.306009]     nr_writeback 0
<4>[  446.309089]     nr_slab_reclaimable 5593
<4>[  446.313076]     nr_slab_unreclaimable 3011
<4>[  446.317200]     nr_page_table_pages 400
<4>[  446.321128]     nr_kernel_stack 234
<4>[  446.324803]     nr_unstable  0
<4>[  446.327886]     nr_bounce    0
<4>[  446.330998]     nr_vmscan_write 73
<4>[  446.334428]     nr_vmscan_immediate_reclaim 2
<4>[  446.338808]     nr_writeback_temp 0
<4>[  446.342346]     nr_isolated_anon 0
<4>[  446.345780]     nr_isolated_file 0
<4>[  446.349202]     nr_shmem     13812
<4>[  446.352666]     nr_dirtied   243488
<4>[  446.356177]     nr_written   241355
<4>[  446.359687]     nr_anon_transparent_hugepages 0
<4>[  446.364313]         protection: (0, 0, 0)
<4>[  446.368349]   pagesets
<4>[  446.370755]     cpu: 0
<4>[  446.373133]               count: 119
<4>[  446.376730]               high:  186
<4>[  446.380325]               batch: 31
<4>[  446.383861]   vm stats threshold: 12
<4>[  446.387463]     cpu: 1
<4>[  446.389841]               count: 83
<4>[  446.393374]               high:  186
<4>[  446.396974]               batch: 31
<4>[  446.400504]   vm stats threshold: 12
<4>[  446.404101]   all_unreclaimable: 0
<4>[  446.407522]   start_pfn:         11264
<4>[  446.411319]   inactive_ratio:    1
<4>[  446.432227] Filename				Type		Size	Used	Priority
<4>[  446.436891] /dev/md256                              partition	530108	292	-1
<4>[  446.443920] /dev/md322                              partition	7235132	0	-2
<4>[  446.450851] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  446.472092]               total         used         free       shared      buffers
<4>[  446.472099]   Mem:       490756       425656        65100            0        18760
<4>[  446.472102]  Swap:     24542452          292     24542160
<4>[  446.472105] Total:     25033208       425948     24607260
<4>[  446.513277] ==== end ====
<4>[  468.107622] [S62smb] end
<4>[  468.111084] [S64MediaService] start
<4>[  468.718934] [S64MediaService] end
<4>[  468.723171] [S65thttpd] start
<4>[  476.624693] [S65thttpd] end
<4>[  476.628015] [S66ImRd] start
<4>[  476.632260] [S66ImRd] end
<4>[  476.635641] [S66wfm_thttpd] start
<4>[  479.176024] [S66wfm_thttpd] end
<4>[  479.180170] [S67ftp] start
<4>[  479.356879] [S67ftp] end
<4>[  479.359935] [S70crond] start
<4>[  479.364240] [S70crond] end
<4>[  479.367757] [S72logo] start
<4>[  479.372175] [S72logo] end
<4>[  479.375442] [S73ntpclient] start
<4>[  479.379954] [S73ntpclient] end
<4>[  479.393255] [S75stunnel] start
<4>[  479.397764] [S75stunnel] end
<4>[  479.415214] [S77recycled] start
<4>[  480.470506] [S77recycled] end
<4>[  480.474172] [S78qraid1] start
<4>[  480.484102] [S78qraid1] end
<4>[  480.487544] [S83ups] start
<4>[  480.501641] [S83ups] end
<4>[  480.508010] [S85login] start
<4>[  480.522502] [S85login] end
<4>[  480.525872] [S89bonjour] start
<4>[  480.530261] [S89bonjour] end
<4>[  480.576436] [S89wsd] start
<4>[  480.600650] [S89wsd] end
<4>[  491.299026] [S90twonkymedia] start
<4>[  491.303860] [S90twonkymedia] end
<4>[  491.307805] [S92lunportman] start
<4>[  491.312602] [S92lunportman] end
<4>[  491.316562] [S95snmp] start
<4>[  491.329301] [S95snmp] end
<4>[  491.332700] [S97upnpd] start
<4>[  491.336816] [S97upnpd] end
<4>[  491.340177] [S98init_nas] start
<5>[  499.325265] UBI: attaching mtd6 to ubi2
<5>[  499.329126] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  499.335446] UBI: logical eraseblock size:    126976 bytes
<5>[  499.340870] UBI: smallest flash I/O unit:    2048
<5>[  499.345591] UBI: VID header offset:          2048 (aligned 2048)
<5>[  499.351659] UBI: data offset:                4096
<5>[  499.468961] UBI: max. sequence number:       214
<5>[  499.484272] UBI: attached mtd6 to ubi2
<5>[  499.488038] UBI: MTD device name:            "config"
<5>[  499.493120] UBI: MTD device size:            15 MiB
<5>[  499.498011] UBI: number of good PEBs:        120
<5>[  499.502647] UBI: number of bad PEBs:         0
<5>[  499.507101] UBI: number of corrupted PEBs:   0
<5>[  499.511571] UBI: max. allowed volumes:       128
<5>[  499.516199] UBI: wear-leveling threshold:    4096
<5>[  499.520928] UBI: number of internal volumes: 1
<5>[  499.525388] UBI: number of user volumes:     1
<5>[  499.529847] UBI: available PEBs:             0
<5>[  499.534314] UBI: total number of reserved PEBs: 120
<5>[  499.539205] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  499.545231] UBI: max/mean erase counter: 3/2
<5>[  499.549511] UBI: image sequence number:  1872325126
<5>[  499.554415] UBI: background thread "ubi_bgt2d" started, PID 11940
<5>[  499.672708] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  499.678734] UBIFS: mounted read-only
<5>[  499.682370] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  499.689976] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  499.697321] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  499.703178] UBIFS: default compressor: lzo
<5>[  499.707287] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  499.721350] UBIFS: un-mount UBI device 2, volume 0
<5>[  499.770174] UBI: mtd6 is detached from ubi2
<4>[  503.143538] rule type=1, num=4
<4>[  507.199867] [S98init_nas] end
<4>[  507.203824] [S99atalk] start
<4>[  507.207884] [S99atalk] end
<4>[  507.217760] [S99cloudinstall_report_complete_daemon] start
<4>[  507.238586] [S99cloudinstall_report_complete_daemon] end
<4>[  507.257982] [S99init_iTune] start
<4>[  507.268301] [S99init_iTune] end
<4>[  507.300807] [S99mysqld] start
<4>[  507.307716] [S99mysqld] end
<4>[  507.323338] [S99nfs] start
<4>[  507.339386] [S99nfs] end
<4>[  507.354222] [S99porter] start
<4>[  507.358650] [S99porter] end
<4>[  507.415796] [S99qanalytic] start
<4>[  507.420229] [S99qanalytic] end
<4>[  507.453222] [S99qcloud] start
<4>[  507.482084] [S99qcloud] end
<4>[  507.485616] [S99qsyncman] start
<4>[  507.542223] [S99qsyncman] end
<4>[  507.545841] [S99sdmd.sh] start
<4>[  507.587813] [S99sdmd.sh] end
<4>[  507.636981] [S99sync_action.sh] start
<4>[  507.661743] [S99sync_action.sh] end
<4>[  507.719831] [S99z_antivirus] start
<4>[  507.742312] [S99z_antivirus] end
<4>[  594.005917] ====== 2020-02-10 13:20:42 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  610.677250] UBI: attaching mtd6 to ubi2
<5>[  610.681107] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  610.687472] UBI: logical eraseblock size:    126976 bytes
<5>[  610.692890] UBI: smallest flash I/O unit:    2048
<5>[  610.697630] UBI: VID header offset:          2048 (aligned 2048)
<5>[  610.703678] UBI: data offset:                4096
<5>[  610.833566] UBI: max. sequence number:       214
<5>[  610.848917] UBI: attached mtd6 to ubi2
<5>[  610.852686] UBI: MTD device name:            "config"
<5>[  610.857801] UBI: MTD device size:            15 MiB
<5>[  610.862697] UBI: number of good PEBs:        120
<5>[  610.867370] UBI: number of bad PEBs:         0
<5>[  610.871852] UBI: number of corrupted PEBs:   0
<5>[  610.876354] UBI: max. allowed volumes:       128
<5>[  610.880993] UBI: wear-leveling threshold:    4096
<5>[  610.885752] UBI: number of internal volumes: 1
<5>[  610.890215] UBI: number of user volumes:     1
<5>[  610.894701] UBI: available PEBs:             0
<5>[  610.899162] UBI: total number of reserved PEBs: 120
<5>[  610.904078] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  610.910107] UBI: max/mean erase counter: 3/2
<5>[  610.914421] UBI: image sequence number:  1872325126
<5>[  610.920540] UBI: background thread "ubi_bgt2d" started, PID 16705
<5>[  611.063414] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  611.069456] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  611.077096] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  611.084659] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  611.090595] UBIFS: default compressor: lzo
<5>[  611.094729] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  611.315247] UBIFS: un-mount UBI device 2, volume 0
<5>[  611.379261] UBI: mtd6 is detached from ubi2
<6>[ 1037.719018] Bluetooth: Core ver 2.16
<6>[ 1037.722669] NET: Registered protocol family 31
<6>[ 1037.727186] Bluetooth: HCI device and connection manager initialized
<6>[ 1037.733578] Bluetooth: HCI socket layer initialized
<6>[ 1037.738475] Bluetooth: L2CAP socket layer initialized
<6>[ 1037.743575] Bluetooth: SCO socket layer initialized
<6>[ 1037.770647] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[ 1037.776405] usbcore: registered new interface driver btusb
<6>[ 1037.799331] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1037.804277] Bluetooth: RFCOMM socket layer initialized
<6>[ 1037.809439] Bluetooth: RFCOMM ver 1.11
<6>[ 1309.515864] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[ 1427.597812] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[ 2042.573353] PHY: comcerto-0:06 - Link is Down
<6>[ 2043.573372] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[ 2375.573355] PHY: comcerto-0:06 - Link is Down
<6>[ 2376.573359] PHY: comcerto-0:06 - Link is Up - 1000/Full
<5>[22210.631367] UBI: attaching mtd6 to ubi2
<5>[22210.635248] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22210.641532] UBI: logical eraseblock size:    126976 bytes
<5>[22210.646965] UBI: smallest flash I/O unit:    2048
<5>[22210.651682] UBI: VID header offset:          2048 (aligned 2048)
<5>[22210.657713] UBI: data offset:                4096
<5>[22210.765754] UBI: max. sequence number:       218
<5>[22210.781039] UBI: attached mtd6 to ubi2
<5>[22210.784843] UBI: MTD device name:            "config"
<5>[22210.789911] UBI: MTD device size:            15 MiB
<5>[22210.794812] UBI: number of good PEBs:        120
<5>[22210.799441] UBI: number of bad PEBs:         0
<5>[22210.803903] UBI: number of corrupted PEBs:   0
<5>[22210.808357] UBI: max. allowed volumes:       128
<5>[22210.812985] UBI: wear-leveling threshold:    4096
<5>[22210.817709] UBI: number of internal volumes: 1
<5>[22210.822164] UBI: number of user volumes:     1
<5>[22210.826625] UBI: available PEBs:             0
<5>[22210.831079] UBI: total number of reserved PEBs: 120
<5>[22210.835977] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22210.842000] UBI: max/mean erase counter: 3/2
<5>[22210.846287] UBI: image sequence number:  1872325126
<5>[22210.851189] UBI: background thread "ubi_bgt2d" started, PID 15874
<5>[22210.986113] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22210.992177] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22210.999837] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22211.007254] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22211.013177] UBIFS: default compressor: lzo
<5>[22211.017295] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22212.057397] UBIFS: un-mount UBI device 2, volume 0
<5>[22212.166658] UBI: mtd6 is detached from ubi2
<6>[22286.469944] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[22286.562903] eth0: pfe_eth_close
<6>[22286.593169] hif_lib_client_unregister : client: 9e1403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[22286.602589] hif_process_client_req: unregister client_id 1
<6>[22286.608100] pfe_hif_client_unregister
<6>[22286.669862] eth1: pfe_eth_close
<6>[22286.703183] hif_lib_client_unregister : client: 9f3403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[22286.712604] hif_process_client_req: unregister client_id 0
<6>[22286.718117] pfe_hif_client_unregister
<5>[22302.794192] UBI: attaching mtd6 to ubi2
<5>[22302.798045] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22302.804353] UBI: logical eraseblock size:    126976 bytes
<5>[22302.809767] UBI: smallest flash I/O unit:    2048
<5>[22302.814495] UBI: VID header offset:          2048 (aligned 2048)
<5>[22302.820516] UBI: data offset:                4096
<5>[22302.928201] UBI: max. sequence number:       219
<5>[22302.943457] UBI: attached mtd6 to ubi2
<5>[22302.947222] UBI: MTD device name:            "config"
<5>[22302.952287] UBI: MTD device size:            15 MiB
<5>[22302.957200] UBI: number of good PEBs:        120
<5>[22302.961829] UBI: number of bad PEBs:         0
<5>[22302.966301] UBI: number of corrupted PEBs:   0
<5>[22302.970757] UBI: max. allowed volumes:       128
<5>[22302.975393] UBI: wear-leveling threshold:    4096
<5>[22302.980109] UBI: number of internal volumes: 1
<5>[22302.984571] UBI: number of user volumes:     1
<5>[22302.989025] UBI: available PEBs:             0
<5>[22302.993488] UBI: total number of reserved PEBs: 120
<5>[22302.998377] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22303.004405] UBI: max/mean erase counter: 3/2
<5>[22303.008685] UBI: image sequence number:  1872325126
<5>[22303.013739] UBI: background thread "ubi_bgt2d" started, PID 20791
<5>[22303.132166] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22303.138220] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22303.145824] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22303.153164] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22303.159012] UBIFS: default compressor: lzo
<5>[22303.163119] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22303.495226] UBIFS: un-mount UBI device 2, volume 0
<5>[22303.549399] UBI: mtd6 is detached from ubi2
[Diagnostic] Mon Feb 10 20:34:41 CET 2020, 499.81
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000183] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060215] Mount-cache hash table entries: 512
<6>[    0.060716] Initializing cgroup subsys cpuacct
<6>[    0.060746] Initializing cgroup subsys devices
<6>[    0.060780] CPU: Testing write buffer coherency: ok
<6>[    0.060939] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060963] Calibrating local timer... 299.86MHz.
<4>[    0.120061]  Creating cpu1_hotplug_thread....
<4>[    0.120150]  cpu1_hotplug_thread Created
<6>[    0.120165] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121561] CPU1: Booted secondary processor
<6>[    0.180037] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180086] Brought up 2 CPUs
<6>[    0.180098] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180819] devtmpfs: initialized
<6>[    0.182208] xor: measuring software checksum speed
<6>[    0.229986]    arm4regs  :  2128.800 MB/sec
<6>[    0.279962]    8regs     :  1438.000 MB/sec
<6>[    0.329938]    32regs    :  1409.600 MB/sec
<6>[    0.329945] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330152] NET: Registered protocol family 16
<6>[    0.330644] L310 cache controller enabled
<6>[    0.330657] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330736] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330741] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330755] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330763] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331273] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331282] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331297] Power Management Mode Support For C2000: 
<6>[    0.331609] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.345322] PCIe0: Link Up Success 
<6>[    0.345328] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.345334] comcerto_pcie_rc_int_init
<6>[    0.345375] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338157] PCIe1: Link Up Failed 
<7>[    4.338294] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338356] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338370] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338490] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338589] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338599] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338612] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349934] bio: create slab <bio-0> at 0
<4>[    4.519678] raid6: int32x1     25 MB/s
<4>[    4.689195] raid6: int32x2     48 MB/s
<4>[    4.858546] raid6: int32x4     82 MB/s
<4>[    5.027859] raid6: int32x8    112 MB/s
<4>[    5.027865] raid6: using algorithm int32x8 (112 MB/s)
<6>[    5.028061] vgaarb: loaded
<5>[    5.028360] SCSI subsystem initialized
<7>[    5.028497] libata version 3.00 loaded.
<6>[    5.028652] usbcore: registered new interface driver usbfs
<6>[    5.028732] usbcore: registered new interface driver hub
<6>[    5.028813] usbcore: registered new device driver usb
<6>[    5.029035] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029451] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.029837] Switching to clocksource timer2
<5>[    5.030065] FS-Cache: Loaded
<6>[    5.030188] CacheFiles: Loaded
<6>[    5.031073] NET: Registered protocol family 2
<6>[    5.031268] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.031919] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032100] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032264] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032271] TCP reno registered
<6>[    5.032280] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032310] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032556] NET: Registered protocol family 1
<6>[    5.032849] RPC: Registered named UNIX socket transport module.
<6>[    5.032856] RPC: Registered udp transport module.
<6>[    5.032862] RPC: Registered tcp transport module.
<6>[    5.032867] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.032889] PCI: CLS 32 bytes, default 32
<6>[    6.072078] membuf_init: created membuf device(253, 0)
<6>[    6.072364] audit: initializing netlink socket (disabled)
<5>[    6.072387] type=2000 audit(6.070:1): initialized
<5>[    6.073327] VFS: Disk quotas dquot_6.5.2
<4>[    6.073468] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074039] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074296] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074957] fuse init (API version 7.17)
<6>[    6.075139] msgmni has been set to 932
<6>[    6.076838] async_tx: api initialized (async)
<6>[    6.076952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076961] io scheduler noop registered
<6>[    6.076966] io scheduler deadline registered
<6>[    6.077021] io scheduler cfq registered (default)
<6>[    6.077324] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.464525] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.115109] console [ttyS0] enabled
<6>[    7.254485] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.351217] brd: module loaded
<6>[    7.440101] loop: module loaded
<6>[    7.444616] nbd: registered device at major 43
<6>[    7.454301] SCSI Media Changer driver v0.25 
<7>[    7.458683] ahci 0000:00:00.0: version 3.0
<4>[    7.458702] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.464460] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.471495] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.477030] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.485157] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.494215] scsi0 : ahci
<6>[    7.497113] scsi1 : ahci
<6>[    7.499817] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.507167] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.514623] SATA Serdes: 48Mhz ref clk
<6>[    7.518869] Serdes2: Lane OK Passed
<4>[    7.522385] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.527071] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.534848] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.543437] scsi2 : ahci_platform
<6>[    7.546973] scsi3 : ahci_platform
<6>[    7.550460] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.558401] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.567266] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.576629] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.584530] Fixed MDIO Bus: probed
<6>[    7.587993] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.792182] Core Release: 2.81a
<4>[    7.795338] Setting default values for core params
<6>[    7.909878] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.915332] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.999921] Using Buffer DMA mode
<4>[    8.003245] Periodic Transfer Interrupt Enhancement - disabled
<4>[    8.009092] Multiprocessor Interrupt Enhancement - disabled
<4>[    8.014690] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    8.019089] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    8.023896] drivers/usb/core/inode.c: creating file 'devices'
<7>[    8.023911] drivers/usb/core/inode.c: creating file '001'
<6>[    8.023925] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    8.031023] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    8.036411] Init: Port Power? op_state=1
<4>[    8.040351] Init: Power Port (0)
<7>[    8.043618] usb usb1: default language 0x0409
<7>[    8.043636] usb usb1: udev 1, busnum 1, minor = 0
<6>[    8.043643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    8.050460] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    8.057702] usb usb1: Product: DWC OTG Controller
<6>[    8.059907] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.060535] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.060542] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.061100] ata1.00: configured for UDMA/133
<5>[    8.061475] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.061488] ata1.00: set queue depth = 31
<4>[    8.061672] Check proc_name[ahci].
<5>[    8.061972] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.062303] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.062311] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.062504] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.062512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.062577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.108948]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.138907] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<5>[    8.139567] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.148865] usb usb1: SerialNumber: dwc_otg.0
<7>[    8.153512] usb usb1: usb_probe_device
<7>[    8.153522] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.153548] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.153639] hub 1-0:1.0: usb_probe_interface
<7>[    8.153646] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.153653] hub 1-0:1.0: USB hub found
<6>[    8.157422] hub 1-0:1.0: 1 port detected
<7>[    8.161370] hub 1-0:1.0: standalone hub
<7>[    8.161376] hub 1-0:1.0: ganged power switching
<7>[    8.161381] hub 1-0:1.0: individual port over-current protection
<7>[    8.161387] hub 1-0:1.0: Single TT
<7>[    8.161394] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.161401] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.161415] hub 1-0:1.0: local power source is good
<7>[    8.161422] hub 1-0:1.0: enabling power on all ports
<7>[    8.161576] drivers/usb/core/inode.c: creating file '001'
<7>[    8.161696] Module dwc_common_port init
<6>[    8.161823] mousedev: PS/2 mouse device common for all mice
<6>[    8.167602] i2c /dev entries driver
<4>[    8.171213] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.179028] comcerto_wdt: support registered
<6>[    8.183353] md: linear personality registered for level -1
<6>[    8.188854] md: raid0 personality registered for level 0
<6>[    8.194190] md: raid1 personality registered for level 1
<6>[    8.199515] md: raid10 personality registered for level 10
<6>[    8.205023] md: raid6 personality registered for level 6
<6>[    8.210353] md: raid5 personality registered for level 5
<6>[    8.215678] md: raid4 personality registered for level 4
<6>[    8.221009] md: multipath personality registered for level -4
<6>[    8.227088] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.235608] dm_crypt using the OCF for crypto acceleration.
<6>[    8.241376] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.246880] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.253436] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.259887] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.259891] 
<7>[    8.259920] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.268539] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.279074] ALSA device list:
<6>[    8.282065]   No soundcards found.
<6>[    8.286100] TCP cubic registered
<6>[    8.289341] NET: Registered protocol family 17
<7>[    8.289886] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.289899] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.289903] 
<7>[    8.289912] hub 1-0:1.0: over-current change on port 1
<6>[    8.302297] NET: Registered protocol family 15
<6>[    8.306753] Initializing NETLINK_KEY socket
<6>[    8.310965] NET: Registered protocol family 5
<6>[    8.315421] lib80211: common routines for IEEE802.11 drivers
<7>[    8.321106] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.321112] Registering the dns_resolver key type
<6>[    8.325858] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.333562] Clocks: disabled unused pll2
<6>[    8.337495] Clocks: disabled unused uart
<6>[    8.341436] Clocks: disabled unused gemtx
<6>[    8.345456] Clocks: disabled unused ipsec_spacc
<6>[    8.350001] Clocks: disabled unused dpi_cie
<6>[    8.354194] Clocks: disabled unused dpi_decomp
<6>[    8.358649] Clocks: disabled unused ntgref
<6>[    8.362760] Clocks: disabled unused pcie1
<6>[    8.366779] Clocks: disabled unused usb1
<6>[    8.370715] Clocks: disabled unused ext_phy0
<6>[    8.374994] Clocks: disabled unused ext_phy1
<6>[    8.379274] Clocks: disabled unused ext_phy2
<6>[    8.383558] Clocks: disabled unused tpi
<6>[    8.387403] Clocks: disabled unused csys
<6>[    8.391338] Clocks: disabled unused tsuntg
<6>[    8.395444] Clocks: disabled unused sata_occ
<6>[    8.399723] Clocks: disabled unused pcie_occ
<7>[    8.399874] hub 1-0:1.0: enabling power on all ports
<6>[    8.404008] Clocks: disabled unused sgmii_occ
<4>[    8.600665] Registering CPUFreq(comcerto)
<4>[    8.604964] Please be patient, while OpenWrt loads ...
<6>[    8.659890] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.666709] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.673542] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.681448] ata2.00: configured for UDMA/133
<5>[    8.686111] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.694257] ata2.00: set queue depth = 31
<4>[    8.698480] Check proc_name[ahci].
<5>[    8.702105] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.702208] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.715294] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.720798] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.725605] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.725677] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.774855]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.780285] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.802460] Freeing init memory: 13476K
<6>[    9.313690] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.320438] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.578939] RTC_TIME:Mon Feb 10 20:26:31 2020  0.000000 seconds
<6>[    9.609963] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.614614] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.620560] Creating 2 MTD partitions on "spi0.0":
<5>[    9.625367] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.631123] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.641451] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.648535] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.653730] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.662373] Using default values for hw ecc
<4>[    9.669994] Bad block table not found for chip 0
<4>[    9.677995] Bad block table not found for chip 0
<6>[    9.682633] Scanning device for bad blocks
<4>[    9.687778] Bad eraseblock 18 at 0x000000240000
<4>[    9.695265] Bad eraseblock 72 at 0x000000900000
<4>[    9.714935] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.721252] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.752114] Bad eraseblock 863 at 0x000006be0000
<4>[    9.777749] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.797492] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.945279] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.954826] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.961147] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.967606] Creating 5 MTD partitions on "comcertonand":
<5>[    9.972946] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.979237] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.985633] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.991850] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.998203] 0x00001f000000-0x00001ff00000 : "config"
<6>[   10.011190] usbcore: registered new interface driver usbhid
<6>[   10.016780] usbhid: USB HID core driver
<6>[   10.026276] usbcore: registered new interface driver usblp
<6>[   10.038800] ## xhci_plat_probe
<6>[   10.041900] ### comcerto_start_xhci
<6>[   10.045408] USB3.0 clock selected: internal
<6>[   10.052855] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.057767] drivers/usb/core/inode.c: creating file '002'
<6>[   10.057788] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.065010] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.070379] usb usb2: default language 0x0409
<7>[   10.070397] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.070405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.077212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.084462] usb usb2: Product: xHCI Host Controller
<6>[   10.089352] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.094769] usb usb2: SerialNumber: xhci-hcd
<7>[   10.099303] usb usb2: usb_probe_device
<7>[   10.099312] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.099324] xHCI xhci_add_endpoint called for root hub
<7>[   10.099331] xHCI xhci_check_bandwidth called for root hub
<7>[   10.099350] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.099447] hub 2-0:1.0: usb_probe_interface
<7>[   10.099455] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.099461] hub 2-0:1.0: USB hub found
<6>[   10.103245] hub 2-0:1.0: 1 port detected
<7>[   10.107178] hub 2-0:1.0: standalone hub
<7>[   10.107183] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.107189] hub 2-0:1.0: individual port over-current protection
<7>[   10.107195] hub 2-0:1.0: Single TT
<7>[   10.107201] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.107208] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.107222] hub 2-0:1.0: local power source is good
<7>[   10.107228] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.107366] drivers/usb/core/inode.c: creating file '001'
<6>[   10.107441] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.112369] drivers/usb/core/inode.c: creating file '003'
<6>[   10.112383] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.119495] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.119507] usb usb3: default language 0x0409
<7>[   10.119524] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.119531] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.126357] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.133606] usb usb3: Product: xHCI Host Controller
<6>[   10.138496] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.143913] usb usb3: SerialNumber: xhci-hcd
<7>[   10.148417] usb usb3: usb_probe_device
<7>[   10.148425] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.148435] xHCI xhci_add_endpoint called for root hub
<7>[   10.148441] xHCI xhci_check_bandwidth called for root hub
<7>[   10.148459] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.148552] hub 3-0:1.0: usb_probe_interface
<7>[   10.148559] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.148566] hub 3-0:1.0: USB hub found
<6>[   10.152343] hub 3-0:1.0: 1 port detected
<7>[   10.156276] hub 3-0:1.0: standalone hub
<7>[   10.156282] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.156287] hub 3-0:1.0: individual port over-current protection
<7>[   10.156294] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.156301] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.156313] hub 3-0:1.0: local power source is good
<7>[   10.156320] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.156455] drivers/usb/core/inode.c: creating file '001'
<6>[   10.163890] Initializing USB Mass Storage driver...
<6>[   10.168897] usbcore: registered new interface driver usb-storage
<6>[   10.174938] USB Mass Storage support registered.
<7>[   10.199918] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.249941] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.300031] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.300074] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.419921] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.442456] usb 2-1: default language 0x0409
<7>[   10.442996] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.443005] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.449737] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.456928] usb 2-1: Product: USB2.0 Hub
<6>[   10.460875] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.465672] usb 2-1: usb_probe_device
<7>[   10.465683] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.471508] usb 2-1: Successful Endpoint Configure command
<7>[   10.471767] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.471909] hub 2-1:1.0: usb_probe_interface
<7>[   10.471919] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.471926] hub 2-1:1.0: USB hub found
<6>[   10.475938] hub 2-1:1.0: 4 ports detected
<7>[   10.480016] hub 2-1:1.0: standalone hub
<7>[   10.480024] hub 2-1:1.0: individual port power switching
<7>[   10.480030] hub 2-1:1.0: individual port over-current protection
<7>[   10.503975] usb 2-1: Successful Endpoint Configure command
<7>[   10.504275] hub 2-1:1.0: TT per port
<7>[   10.504284] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.504290] hub 2-1:1.0: Port indicators are supported
<7>[   10.504297] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.504694] usb 2-1: Successful Endpoint Configure command
<7>[   10.504899] hub 2-1:1.0: local power source is good
<7>[   10.504909] hub 2-1:1.0: enabling power on all ports
<7>[   10.505794] drivers/usb/core/inode.c: creating file '002'
<7>[   10.505892] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.505923] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.561752] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.568139] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.601719] hub 2-1:1.0: port 3: status 0301 change 0001
<4>[   10.609988] flashcache: flashcache-1.0-dummy initialized
<6>[   10.620061] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.641832] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.642007] usb 3-1: default language 0x0409
<7>[   10.642541] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.642549] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.649274] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.656468] usb 3-1: Product: USB3.0 Hub
<6>[   10.660416] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.665233] usb 3-1: usb_probe_device
<7>[   10.665244] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.679473] usb 3-1: Successful Endpoint Configure command
<7>[   10.679663] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.680060] hub 3-1:1.0: usb_probe_interface
<7>[   10.680068] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.680075] hub 3-1:1.0: USB hub found
<6>[   10.684121] hub 3-1:1.0: 4 ports detected
<7>[   10.688144] hub 3-1:1.0: standalone hub
<7>[   10.688149] hub 3-1:1.0: individual port power switching
<7>[   10.688155] hub 3-1:1.0: individual port over-current protection
<7>[   10.688163] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.688170] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.688350] usb 3-1: Successful Endpoint Configure command
<7>[   10.688492] hub 3-1:1.0: local power source is good
<7>[   10.688603] hub 3-1:1.0: enabling power on all ports
<7>[   10.689333] drivers/usb/core/inode.c: creating file '002'
<7>[   10.699916] hub 2-1:1.0: state 7 ports 4 chg 0008 evt 0000
<7>[   10.700133] hub 2-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
<5>[   10.778396] UBI: attaching mtd3 to ubi0
<6>[   10.780358] usb 2-1.3: new low-speed USB device number 3 using xhci-hcd
<5>[   10.788895] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.795188] UBI: logical eraseblock size:    126976 bytes
<5>[   10.800606] UBI: smallest flash I/O unit:    2048
<7>[   10.804106] usb 2-1.3: skipped 1 descriptor after interface
<7>[   10.804685] usb 2-1.3: default language 0x0409
<5>[   10.805323] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.811349] UBI: data offset:                4096
<7>[   10.811651] usb 2-1.3: udev 3, busnum 2, minor = 130
<6>[   10.811658] usb 2-1.3: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.811666] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.811672] usb 2-1.3: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.811678] usb 2-1.3: Manufacturer: American Power Conversion
<6>[   10.811683] usb 2-1.3: SerialNumber: 3B1524X23300  
<7>[   10.848269] usb 2-1.3: usb_probe_device
<7>[   10.848280] usb 2-1.3: configuration #1 chosen from 1 choice
<4>[   10.848346] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.887468] usb 2-1.3: Successful Endpoint Configure command
<7>[   10.888168] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
<7>[   10.888286] usbhid 2-1.3:1.0: usb_probe_interface
<7>[   10.888295] usbhid 2-1.3:1.0: usb_probe_interface - got id
<7>[   11.214691] usbhid 2-1.3:1.0: looking for a minor, starting at 96
<6>[   11.214856] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.3/input0
<7>[   11.230626] drivers/usb/core/inode.c: creating file '003'
<7>[   11.230709] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.324345] UBI: max. sequence number:       2
<5>[   12.341153] UBI: attached mtd3 to ubi0
<5>[   12.344912] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.350614] UBI: MTD device size:            216 MiB
<5>[   12.355591] UBI: number of good PEBs:        1723
<5>[   12.360313] UBI: number of bad PEBs:         5
<5>[   12.364768] UBI: number of corrupted PEBs:   0
<5>[   12.369222] UBI: max. allowed volumes:       128
<5>[   12.373855] UBI: wear-leveling threshold:    4096
<5>[   12.378570] UBI: number of internal volumes: 1
<5>[   12.383030] UBI: number of user volumes:     1
<5>[   12.387483] UBI: available PEBs:             0
<5>[   12.391941] UBI: total number of reserved PEBs: 1723
<5>[   12.396917] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.403032] UBI: max/mean erase counter: 22/14
<5>[   12.407485] UBI: image sequence number:  1535285440
<5>[   12.412392] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.528587] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.534713] UBIFS: mounted read-only
<5>[   12.538300] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.546330] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.553670] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.559518] UBIFS: default compressor: lzo
<5>[   12.563631] UBIFS: reserved for root:  0 bytes (0 KiB)
<7>[   16.263520] hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0008
<7>[   16.263897] hub 2-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
<6>[   16.264069] usb 2-1.3: USB disconnect, device number 3
<7>[   16.269224] usb 2-1.3: unregistering device
<7>[   16.269231] usb 2-1.3: unregistering interface 2-1.3:1.0
<7>[   16.269346] drivers/usb/core/file.c: removing 96 minor
<7>[   16.269649] usb 2-1.3: usb_disable_device nuking all URBs
<7>[   16.295458] usb 2-1.3: Successful Endpoint Configure command
<7>[   16.450054] hub 2-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
<5>[   33.910661] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.958902] UBI: mtd3 is detached from ubi0
<6>[   33.971904] usbcore: registered new interface driver usbserial
<6>[   33.977756] usbserial: USB Serial Driver core
<6>[   33.987638] USB Serial support registered for pl2303
<6>[   33.992726] usbcore: registered new interface driver pl2303
<6>[   33.998313] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.010188] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.023844] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.030259] Disabling lock debugging due to kernel taint
<5>[   34.056812] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.056818] NTFSJ support included
<5>[   34.056820] exFAT support included
<5>[   34.056822] Hfs+J support included
<5>[   34.056824] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.084065] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.088522] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.362084] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.371446] udev: starting version 140
<6>[   34.378232] pfe_module_init
<6>[   34.381119] pfe_platform_probe
<6>[   34.385214] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.391039] pfe_probe
<6>[   34.393317] PFE Driver version:
<6>[   34.393319] pfe_ctrl_10_00_4
<6>[   34.393321] built with pfe sources version: pfe_10_00_3
<6>[   34.404592] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.414188] pfe_hw_init
<6>[   34.416639] CLASS version: 20
<6>[   34.419613] TMU version: 1011231
<6>[   34.422852] BMU1 version: 21
<6>[   34.425738] BMU2 version: 21
<6>[   34.428624] EMAC1 network cfg: 80000
<6>[   34.432211] EMAC2 network cfg: 80000
<6>[   34.435794] EMAC3 network cfg: 80000
<6>[   34.439376] EGPI1 version: 50
<6>[   34.442354] EGPI2 version: 50
<6>[   34.445327] EGPI3 version: 50
<6>[   34.448300] HGPI version: 50
<6>[   34.451191] GPT version: 0
<6>[   34.453904] HIF version: 10
<6>[   34.456703] HIF NOPCY version: 10
<6>[   34.460028] UTIL version: 20
<6>[   34.462915] bmu_init(1) done
<6>[   34.465802] bmu_init(2) done
<6>[   34.475147] class_init() done
<6>[   34.478125] tmu_init: mem init
<6>[   34.481190] tmu_init: lmem init
<6>[   34.484382] tmu_init() done
<6>[   34.487181] util_init() done
<6>[   34.490075] gpi_init(1) done
<6>[   34.492963] gpi_init(2) done
<6>[   34.495850] gpi_init(3) done
<6>[   34.498738] gpi_init(hif) done
<6>[   34.501803] bmu_enable(1) done
<6>[   34.504863] bmu_enable(2) done
<6>[   34.507924] pfe_hif_lib_init
<6>[   34.510985] pfe_hif_init
<6>[   34.513524] pfe_hif_alloc_descr
<6>[   34.516772] pfe_hif_init_buffers
<6>[   34.520139] pfe_firmware_init
<6>[   34.682626] pfe_load_elf
<3>[   34.685180] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.716714] PFE binary version: pfe_10_00_3
<6>[   34.720926] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.727383] pfe_load_elf
<6>[   34.731304] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.736629] pfe_load_elf
<6>[   34.740961] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.746499] pfe_ctrl_init
<6>[   34.767257] pfe_ctrl_init finished
<6>[   34.767263] pfe_ctrl_timer
<6>[   34.773419] pfe_eth_init
<6>[   34.784861] Comcerto MDIO Bus: probed
<6>[   34.789779] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.798268] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.805129] pfe_vwd_init
<6>[   34.807770] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.812774] pfe_vwd_driver_init: start
<4>[   34.816539] pfe_vwd_up: start
<6>[   34.819574] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.826666] pfe_vwd_driver_init: end
<6>[   34.830258] pfe_pcap_init
<6>[   34.872018] eth0: pfe_eth_open
<6>[   34.875238] hif_process_client_req: register client_id 0
<6>[   34.880586] pfe_hif_client_register
<6>[   34.884134] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.892452] eth0: pfe_gemac_init
<6>[   34.910344] eth0: pfe_eth_close
<6>[   34.949878] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.959301] hif_process_client_req: unregister client_id 0
<6>[   34.964807] pfe_hif_client_unregister
<6>[   34.968944] eth1: pfe_eth_open
<6>[   34.972143] hif_process_client_req: register client_id 1
<6>[   34.977469] pfe_hif_client_register
<6>[   34.980976] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.989265] eth1: pfe_gemac_init
<6>[   34.993148] eth1: pfe_eth_close
<6>[   35.029874] hif_lib_client_unregister : client: 9fac03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.039295] hif_process_client_req: unregister client_id 1
<6>[   35.044800] pfe_hif_client_unregister
<6>[   35.450839] kjournald starting.  Commit interval 5 seconds
<6>[   35.456371] EXT3-fs (sda1): using internal journal
<6>[   35.461202] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.857837] kjournald starting.  Commit interval 5 seconds
<6>[   35.863390] EXT3-fs (sda1): using internal journal
<6>[   35.868201] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.291889] kjournald starting.  Commit interval 5 seconds
<6>[   36.297420] EXT3-fs (sdb1): using internal journal
<6>[   36.302251] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.622088] md: md9 stopped.
<6>[   36.627455] md: bind<sdb1>
<6>[   36.630615] md: bind<sda1>
<6>[   36.636351] bio: create slab <bio-1> at 1
<6>[   36.640585] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.646152] created bitmap (1 pages) for device md9
<6>[   36.651243] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.676490] md9: detected capacity change from 0 to 542769152
<6>[   37.735886]  md9: unknown partition table
<6>[   37.991682] kjournald starting.  Commit interval 5 seconds
<6>[   38.001058] EXT3-fs (md9): using internal journal
<6>[   38.005783] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.290905] md: md13 stopped.
<6>[   38.299321] md: bind<sdb4>
<6>[   38.302365] md: bind<sda4>
<6>[   38.308207] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.313903] created bitmap (1 pages) for device md13
<6>[   38.319056] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.400865] md13: detected capacity change from 0 to 469893120
<4>[   54.737561] set stripe cache size 1024
<4>[   54.742518] STRIPE_CACHE_SIZE is 1024
<6>[   55.679369] md: bind<sda2>
<6>[   55.684644] md: bind<sdb2>
<6>[   55.690517] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   55.696205] created bitmap (1 pages) for device md256
<6>[   55.701493] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   55.729392] md256: detected capacity change from 0 to 542834688
<6>[   55.792278]  md256: unknown partition table
<6>[   55.861625] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   56.233251] md: bind<sda5>
<6>[   56.236200] md: bind<sdb5>
<6>[   56.242082] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   56.247778] created bitmap (1 pages) for device md322
<6>[   56.253119] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   56.281036] md322: detected capacity change from 0 to 7408779264
<6>[   56.343886]  md322: unknown partition table
<6>[   56.414671] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   57.239446]  md13: unknown partition table
<6>[   57.760492] md: md1 stopped.
<6>[   57.775047] md: bind<sdb3>
<6>[   57.778040] md: bind<sda3>
<6>[   57.783943] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   57.789360] md1: detected capacity change from 0 to 5990981238784
<6>[   57.859960]  md1: unknown partition table
<6>[   68.521423] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[   75.421235] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   79.294472] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   80.338701] [S30mountall] start
<5>[   80.772459] UBI: attaching mtd3 to ubi0
<5>[   80.776312] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   80.782635] UBI: logical eraseblock size:    126976 bytes
<5>[   80.788049] UBI: smallest flash I/O unit:    2048
<5>[   80.792785] UBI: VID header offset:          2048 (aligned 2048)
<5>[   80.798806] UBI: data offset:                4096
<5>[   82.281494] UBI: max. sequence number:       2
<5>[   82.298350] UBI: attached mtd3 to ubi0
<5>[   82.302134] UBI: MTD device name:            "boot1_rootfs2"
<5>[   82.307809] UBI: MTD device size:            216 MiB
<5>[   82.312790] UBI: number of good PEBs:        1723
<5>[   82.317505] UBI: number of bad PEBs:         5
<5>[   82.321963] UBI: number of corrupted PEBs:   0
<5>[   82.326418] UBI: max. allowed volumes:       128
<5>[   82.331049] UBI: wear-leveling threshold:    4096
<5>[   82.335764] UBI: number of internal volumes: 1
<5>[   82.340222] UBI: number of user volumes:     1
<5>[   82.344676] UBI: available PEBs:             0
<5>[   82.349130] UBI: total number of reserved PEBs: 1723
<5>[   82.354110] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   82.360223] UBI: max/mean erase counter: 22/14
<5>[   82.364677] UBI: image sequence number:  1535285440
<5>[   82.369578] UBI: background thread "ubi_bgt0d" started, PID 1602
<5>[   82.499301] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   82.505438] UBIFS: mounted read-only
<5>[   82.509025] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   82.517059] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   82.524394] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   82.530247] UBIFS: default compressor: lzo
<5>[   82.534353] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  104.800787] UBIFS: un-mount UBI device 0, volume 0
<5>[  104.869152] UBI: mtd3 is detached from ubi0
<5>[  105.377961] UBI: attaching mtd3 to ubi0
<5>[  105.381850] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  105.388133] UBI: logical eraseblock size:    126976 bytes
<5>[  105.393560] UBI: smallest flash I/O unit:    2048
<5>[  105.398277] UBI: VID header offset:          2048 (aligned 2048)
<5>[  105.404304] UBI: data offset:                4096
<5>[  106.886064] UBI: max. sequence number:       2
<5>[  106.902922] UBI: attached mtd3 to ubi0
<5>[  106.906688] UBI: MTD device name:            "boot1_rootfs2"
<5>[  106.912379] UBI: MTD device size:            216 MiB
<5>[  106.917356] UBI: number of good PEBs:        1723
<5>[  106.922077] UBI: number of bad PEBs:         5
<5>[  106.926529] UBI: number of corrupted PEBs:   0
<5>[  106.930988] UBI: max. allowed volumes:       128
<5>[  106.935616] UBI: wear-leveling threshold:    4096
<5>[  106.940335] UBI: number of internal volumes: 1
<5>[  106.944788] UBI: number of user volumes:     1
<5>[  106.949241] UBI: available PEBs:             0
<5>[  106.953699] UBI: total number of reserved PEBs: 1723
<5>[  106.958675] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  106.964788] UBI: max/mean erase counter: 22/14
<5>[  106.969242] UBI: image sequence number:  1535285440
<5>[  106.974150] UBI: background thread "ubi_bgt0d" started, PID 1735
<5>[  107.094725] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  107.100859] UBIFS: mounted read-only
<5>[  107.104445] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  107.112479] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  107.119808] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  107.125660] UBIFS: default compressor: lzo
<5>[  107.129767] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  107.202134] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.249045] UBI: mtd3 is detached from ubi0
<6>[  107.476337] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  124.754122] UBI: attaching mtd6 to ubi2
<5>[  124.757978] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  124.764290] UBI: logical eraseblock size:    126976 bytes
<5>[  124.769703] UBI: smallest flash I/O unit:    2048
<5>[  124.774443] UBI: VID header offset:          2048 (aligned 2048)
<5>[  124.780480] UBI: data offset:                4096
<5>[  125.035844] UBI: max. sequence number:       221
<5>[  125.071499] UBI: attached mtd6 to ubi2
<5>[  125.075263] UBI: MTD device name:            "config"
<5>[  125.080360] UBI: MTD device size:            15 MiB
<5>[  125.085251] UBI: number of good PEBs:        120
<5>[  125.089889] UBI: number of bad PEBs:         0
<5>[  125.094344] UBI: number of corrupted PEBs:   0
<5>[  125.098797] UBI: max. allowed volumes:       128
<5>[  125.103432] UBI: wear-leveling threshold:    4096
<5>[  125.108147] UBI: number of internal volumes: 1
<5>[  125.112620] UBI: number of user volumes:     1
<5>[  125.117076] UBI: available PEBs:             0
<5>[  125.121538] UBI: total number of reserved PEBs: 120
<5>[  125.126427] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  125.132465] UBI: max/mean erase counter: 3/2
<5>[  125.136748] UBI: image sequence number:  1872325126
<5>[  125.141745] UBI: background thread "ubi_bgt2d" started, PID 2182
<5>[  125.390790] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  125.396825] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  125.404444] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  125.411781] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  125.417630] UBIFS: default compressor: lzo
<5>[  125.421744] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  125.960798] UBIFS: un-mount UBI device 2, volume 0
<5>[  126.081031] UBI: mtd6 is detached from ubi2
<4>[  126.470929] [S30mountall] end
<4>[  126.474540] [S31init_hardware] start
<6>[  126.657507] sysinfo: Module loaded.
<6>[  127.188597] fnotify: Load file notify kernel module.
<6>[  128.636615] usbcore: registered new interface driver snd-usb-audio
<6>[  128.680563] usbcore: registered new interface driver snd-usb-caiaq
<6>[  128.863832] Linux video capture interface: v2.00
<6>[  128.912160] usbcore: registered new interface driver uvcvideo
<6>[  128.917929] USB Video Class driver (1.1.1)
<6>[  129.169227] NET: Registered protocol family 10
<4>[  132.132221] [S31init_hardware] end
<4>[  132.136198] [S32init_mac_addr] start
<6>[  133.276332] eth0: pfe_eth_open
<6>[  133.279533] hif_process_client_req: register client_id 1
<6>[  133.284878] pfe_hif_client_register
<6>[  133.288386] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  133.296690] eth0: pfe_gemac_init
<6>[  133.300500] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  133.904514] eth1: pfe_eth_open
<6>[  133.907714] hif_process_client_req: register client_id 0
<6>[  133.913054] pfe_hif_client_register
<6>[  133.916590] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  133.924912] eth1: pfe_gemac_init
<6>[  133.928841] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[  135.300105] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  135.305524] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  135.702115] [S32init_mac_addr] end
<4>[  135.706079] [S33sysinit] start
<7>[  147.209887] eth0: no IPv6 routers present
<5>[  156.802067] UBI: attaching mtd6 to ubi2
<5>[  156.805919] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  156.812226] UBI: logical eraseblock size:    126976 bytes
<5>[  156.817639] UBI: smallest flash I/O unit:    2048
<5>[  156.822363] UBI: VID header offset:          2048 (aligned 2048)
<5>[  156.828384] UBI: data offset:                4096
<5>[  156.936271] UBI: max. sequence number:       222
<5>[  156.951568] UBI: attached mtd6 to ubi2
<5>[  156.955333] UBI: MTD device name:            "config"
<5>[  156.960422] UBI: MTD device size:            15 MiB
<5>[  156.965318] UBI: number of good PEBs:        120
<5>[  156.969961] UBI: number of bad PEBs:         0
<5>[  156.974417] UBI: number of corrupted PEBs:   0
<5>[  156.978871] UBI: max. allowed volumes:       128
<5>[  156.983503] UBI: wear-leveling threshold:    4096
<5>[  156.988218] UBI: number of internal volumes: 1
<5>[  156.992676] UBI: number of user volumes:     1
<5>[  156.997129] UBI: available PEBs:             0
<5>[  157.001586] UBI: total number of reserved PEBs: 120
<5>[  157.006474] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  157.012507] UBI: max/mean erase counter: 3/2
<5>[  157.016787] UBI: image sequence number:  1872325126
<5>[  157.021693] UBI: background thread "ubi_bgt2d" started, PID 2835
<5>[  157.166787] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  157.172836] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  157.180434] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  157.187764] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  157.193616] UBIFS: default compressor: lzo
<5>[  157.197723] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  157.218197] UBIFS: un-mount UBI device 2, volume 0
<4>[  242.171984] [S33sysinit] end
<4>[  242.175464] [S34shutdown_check] start
<4>[  242.453311] [S34shutdown_check] end
<4>[  242.457600] [S35init_disk] start
<5>[  242.779161] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  242.785205] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  242.792805] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  242.800138] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  242.805986] UBIFS: default compressor: lzo
<5>[  242.810103] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  242.896937] UBIFS: un-mount UBI device 2, volume 0
<5>[  242.949073] UBI: mtd6 is detached from ubi2
<4>[  244.468618] [S35init_disk] end
<4>[  244.472529] [S40init_network] start
<4>[  244.485869] [S40init_network] end
<4>[  244.489773] [S42hostname] start
<4>[  244.933111] [S42hostname] end
<4>[  244.936635] [S45network] start
<5>[  255.000004] Bridge firewalling registered
<6>[  255.549037] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  255.556261] bonding: MII link monitoring set to 100 ms
<6>[  263.314613] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  272.352723] [S45network] end
<4>[  272.356233] [S46iSCSItrgt] start
<4>[  277.732723] [S46iSCSItrgt] end
<4>[  277.736336] [S46iscsiinit] start
<6>[  277.762323] Loading iSCSI transport class v2.0-870.
<5>[  277.792686] iscsi: registered transport (tcp)
<4>[  279.252303] [S46iscsiinit] end
<4>[  279.255922] [S55urandom] start
<4>[  279.287448] [S55urandom] end
<4>[  279.291333] [S56mariadb] start
<4>[  285.707105] [S56mariadb] end
<4>[  285.710683] [S56start_service] start
<4>[  285.797777] [S56start_service] end
<4>[  285.801852] [S57init_qpkg] start
<4>[  413.336452] [S57init_qpkg] end
<4>[  413.340122] [S57ldap] start
<4>[  413.378859] [S57ldap] end
<4>[  413.382148] [S58dbus] start
<4>[  415.717015] [S58dbus] end
<4>[  415.720261] [S58nsswitch] start
<4>[  415.909433] [S58nsswitch] end
<4>[  415.913012] [S58printer] start
<4>[  415.957211] [S58printer] end
<4>[  420.964621] [S59Qthttpd] start
<4>[  436.537448] [S59Qthttpd] end
<4>[  436.542499] [S62cupsd] start
<4>[  437.825989] [S62cupsd] end
<4>[  437.829431] [S62ntpd] start
<4>[  437.913821] [S62ntpd] end
<4>[  437.916964] [S62smb] start
<4>[  445.398819] ==== memory usage ====
<4>[  445.425517] MemTotal:         490756 kB
<4>[  445.429392] MemFree:           65908 kB
<4>[  445.433475] Buffers:           18416 kB
<4>[  445.437345] Cached:           282920 kB
<4>[  445.441262] SwapCached:           68 kB
<4>[  445.445128] Active:           125016 kB
<4>[  445.448992] Inactive:         247804 kB
<4>[  445.452962] Active(anon):      58800 kB
<4>[  445.456829] Inactive(anon):    68116 kB
<4>[  445.460722] Active(file):      66216 kB
<4>[  445.464582] Inactive(file):   179688 kB
<4>[  445.468445] Unevictable:        2012 kB
<4>[  445.472397] Mlocked:            2012 kB
<4>[  445.476259] SwapTotal:      24542452 kB
<4>[  445.480150] SwapFree:       24542216 kB
<4>[  445.484012] Dirty:               152 kB
<4>[  445.487897] Writeback:             0 kB
<4>[  445.491796] AnonPages:         73460 kB
<4>[  445.495659] Mapped:            18204 kB
<4>[  445.499516] Shmem:             55296 kB
<4>[  445.503405] Slab:              34136 kB
<4>[  445.507264] SReclaimable:      22652 kB
<4>[  445.511151] SUnreclaim:        11484 kB
<4>[  445.515010] KernelStack:        1776 kB
<4>[  445.518866] PageTables:         1600 kB
<4>[  445.522747] NFS_Unstable:          0 kB
<4>[  445.526610] Bounce:                0 kB
<4>[  445.530496] WritebackTmp:          0 kB
<4>[  445.534354] CommitLimit:    24787828 kB
<4>[  445.538209] Committed_AS:    1187532 kB
<4>[  445.542094] VmallocTotal:    1302528 kB
<4>[  445.545951] VmallocUsed:       61368 kB
<4>[  445.550785] VmallocChunk:    1212348 kB
<4>[  445.571771] Node 0, zone      DMA
<4>[  445.575130]   pages free     10969
<4>[  445.578554]         min      366
<4>[  445.581826]         low      457
<4>[  445.585076]         high     549
<4>[  445.588329]         scanned  0
<4>[  445.591419]         spanned  11264
<4>[  445.594844]         present  11154
<4>[  445.598267]     nr_free_pages 10969
<4>[  445.601797]     nr_inactive_anon 0
<4>[  445.605220]     nr_active_anon 0
<4>[  445.608468]     nr_inactive_file 0
<4>[  445.611900]     nr_active_file 0
<4>[  445.615153]     nr_unevictable 0
<4>[  445.618406]     nr_mlock     0
<4>[  445.627633]     nr_anon_pages 0
<4>[  445.630850]     nr_mapped    0
<4>[  445.633931]     nr_file_pages 0
<4>[  445.637095]     nr_dirty     0
<4>[  445.644808]     nr_writeback 0
<4>[  445.647970]     nr_slab_reclaimable 0
<4>[  445.652717]     nr_slab_unreclaimable 0
<4>[  445.656608]     nr_page_table_pages 0
<4>[  445.660342]     nr_kernel_stack 0
<4>[  445.663686]     nr_unstable  0
<4>[  445.666765]     nr_bounce    0
<4>[  445.669843]     nr_vmscan_write 0
<4>[  445.673207]     nr_vmscan_immediate_reclaim 0
<4>[  445.677717]     nr_writeback_temp 0
<4>[  445.682066]     nr_isolated_anon 0
<4>[  445.685519]     nr_isolated_file 0
<4>[  445.688957]     nr_shmem     0
<4>[  445.692072]     nr_dirtied   0
<4>[  445.695153]     nr_written   0
<4>[  445.698234]     nr_anon_transparent_hugepages 0
<4>[  445.702814]         protection: (0, 443, 443)
<4>[  445.707271]   pagesets
<4>[  445.710514]     cpu: 0
<4>[  445.712921]               count: 1
<4>[  445.716363]               high:  6
<4>[  445.719796]               batch: 1
<4>[  445.723260]   vm stats threshold: 4
<4>[  445.726777]     cpu: 1
<4>[  445.729158]               count: 5
<4>[  445.732628]               high:  6
<4>[  445.736081]               batch: 1
<4>[  445.740515]   vm stats threshold: 4
<4>[  445.744158]   all_unreclaimable: 0
<4>[  445.747657]   start_pfn:         0
<4>[  445.751111]   inactive_ratio:    1
<4>[  445.754542] Node 0, zone   Normal
<4>[  445.757881]   pages free     5477
<4>[  445.761245]         min      3729
<4>[  445.764795]         low      4661
<4>[  445.768994]         high     5593
<4>[  445.772402]         scanned  0
<4>[  445.775582]         spanned  119808
<4>[  445.779104]         present  113518
<4>[  445.782649]     nr_free_pages 5477
<4>[  445.786078]     nr_inactive_anon 17029
<4>[  445.789875]     nr_active_anon 14739
<4>[  445.793596]     nr_inactive_file 44922
<4>[  445.798698]     nr_active_file 16554
<4>[  445.802350]     nr_unevictable 503
<4>[  445.805787]     nr_mlock     503
<4>[  445.809043]     nr_anon_pages 18403
<4>[  445.812570]     nr_mapped    4589
<4>[  445.815911]     nr_file_pages 75351
<4>[  445.819435]     nr_dirty     38
<4>[  445.822676]     nr_writeback 0
<4>[  445.827528]     nr_slab_reclaimable 5663
<4>[  445.831537]     nr_slab_unreclaimable 2871
<4>[  445.835671]     nr_page_table_pages 400
<4>[  445.839615]     nr_kernel_stack 222
<4>[  445.843165]     nr_unstable  0
<4>[  445.846246]     nr_bounce    0
<4>[  445.849338]     nr_vmscan_write 59
<4>[  445.853849]     nr_vmscan_immediate_reclaim 0
<4>[  445.858257]     nr_writeback_temp 0
<4>[  445.861800]     nr_isolated_anon 0
<4>[  445.865242]     nr_isolated_file 0
<4>[  445.868671]     nr_shmem     13824
<4>[  445.872110]     nr_dirtied   251846
<4>[  445.875636]     nr_written   249677
<4>[  445.880261]     nr_anon_transparent_hugepages 0
<4>[  445.884850]         protection: (0, 0, 0)
<4>[  445.888894]   pagesets
<4>[  445.891317]     cpu: 0
<4>[  445.893702]               count: 32
<4>[  445.897215]               high:  186
<4>[  445.900842]               batch: 31
<4>[  445.904383]   vm stats threshold: 12
<4>[  445.909057]     cpu: 1
<4>[  445.911491]               count: 86
<4>[  445.915014]               high:  186
<4>[  445.918621]               batch: 31
<4>[  445.933731]   vm stats threshold: 12
<4>[  445.939705]   all_unreclaimable: 0
<4>[  445.943298]   start_pfn:         11264
<4>[  445.947091]   inactive_ratio:    1
<4>[  445.974188] Filename				Type		Size	Used	Priority
<4>[  445.978857] /dev/md256                              partition	530108	236	-1
<4>[  445.985959] /dev/md322                              partition	7235132	0	-2
<4>[  445.992903] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  446.015047]               total         used         free       shared      buffers
<4>[  446.015055]   Mem:       490756       423988        66768            0        18416
<4>[  446.015059]  Swap:     24542452          236     24542216
<4>[  446.015062] Total:     25033208       424224     24608984
<4>[  446.057872] ==== end ====
<4>[  462.823783] [S62smb] end
<4>[  462.826936] [S64MediaService] start
<4>[  463.442569] [S64MediaService] end
<4>[  463.446727] [S65thttpd] start
<4>[  471.336412] [S65thttpd] end
<4>[  471.340012] [S66ImRd] start
<4>[  471.344757] [S66ImRd] end
<4>[  471.348192] [S66wfm_thttpd] start
<4>[  474.136024] [S66wfm_thttpd] end
<4>[  474.139693] [S67ftp] start
<4>[  474.305601] [S67ftp] end
<4>[  474.308657] [S70crond] start
<4>[  474.313034] [S70crond] end
<4>[  474.316454] [S72logo] start
<4>[  474.320839] [S72logo] end
<4>[  474.324107] [S73ntpclient] start
<4>[  474.328645] [S73ntpclient] end
<4>[  474.339333] [S75stunnel] start
<4>[  474.344147] [S75stunnel] end
<4>[  474.347834] [S77recycled] start
<4>[  475.411426] [S77recycled] end
<4>[  475.416536] [S78qraid1] start
<4>[  475.420894] [S78qraid1] end
<4>[  475.424296] [S83ups] start
<4>[  475.428468] [S83ups] end
<4>[  475.456613] [S85login] start
<4>[  475.460919] [S85login] end
<4>[  475.464268] [S89bonjour] start
<4>[  475.468591] [S89bonjour] end
<4>[  475.520748] [S89wsd] start
<4>[  475.525248] [S89wsd] end
<4>[  488.218803] [S90twonkymedia] start
<4>[  488.223732] [S90twonkymedia] end
<4>[  488.227688] [S92lunportman] start
<4>[  488.232583] [S92lunportman] end
<4>[  488.236770] [S95snmp] start
<4>[  488.251486] [S95snmp] end
<4>[  488.270291] [S97upnpd] start
<4>[  488.274509] [S97upnpd] end
<4>[  488.277811] [S98init_nas] start
<5>[  496.221909] UBI: attaching mtd6 to ubi2
<5>[  496.225768] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  496.232082] UBI: logical eraseblock size:    126976 bytes
<5>[  496.237497] UBI: smallest flash I/O unit:    2048
<5>[  496.242268] UBI: VID header offset:          2048 (aligned 2048)
<5>[  496.248305] UBI: data offset:                4096
<5>[  496.369211] UBI: max. sequence number:       224
<5>[  496.384490] UBI: attached mtd6 to ubi2
<5>[  496.388256] UBI: MTD device name:            "config"
<5>[  496.393337] UBI: MTD device size:            15 MiB
<5>[  496.398227] UBI: number of good PEBs:        120
<5>[  496.402861] UBI: number of bad PEBs:         0
<5>[  496.407316] UBI: number of corrupted PEBs:   0
<5>[  496.411774] UBI: max. allowed volumes:       128
<5>[  496.416402] UBI: wear-leveling threshold:    4096
<5>[  496.421121] UBI: number of internal volumes: 1
<5>[  496.425575] UBI: number of user volumes:     1
<5>[  496.430033] UBI: available PEBs:             0
<5>[  496.434488] UBI: total number of reserved PEBs: 120
<5>[  496.439377] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  496.445416] UBI: max/mean erase counter: 3/2
<5>[  496.449696] UBI: image sequence number:  1872325126
<5>[  496.454606] UBI: background thread "ubi_bgt2d" started, PID 11674
<5>[  496.593841] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  496.599886] UBIFS: mounted read-only
<5>[  496.603473] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  496.611073] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  496.618402] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  496.624258] UBIFS: default compressor: lzo
<5>[  496.628365] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  496.641202] UBIFS: un-mount UBI device 2, volume 0
<5>[  496.695601] UBI: mtd6 is detached from ubi2
<4>[  498.504294] rule type=1, num=4
<4>[  502.435436] [S98init_nas] end
<4>[  502.440069] [S99atalk] start
<4>[  502.445066] [S99atalk] end
<4>[  502.448441] [S99cloudinstall_report_complete_daemon] start
<4>[  502.463307] [S99cloudinstall_report_complete_daemon] end
<4>[  502.494134] [S99init_iTune] start
<4>[  502.498663] [S99init_iTune] end
<4>[  502.513571] [S99mysqld] start
<4>[  502.517923] [S99mysqld] end
<4>[  502.543443] [S99nfs] start
<4>[  502.560499] [S99nfs] end
<4>[  502.583241] [S99porter] start
<4>[  502.587369] [S99porter] end
<4>[  502.590713] [S99qanalytic] start
<4>[  502.663261] [S99qanalytic] end
<4>[  502.667190] [S99qcloud] start
<4>[  502.714422] [S99qcloud] end
<4>[  502.755548] [S99qsyncman] start
<4>[  502.773639] [S99qsyncman] end
<4>[  502.817958] [S99sdmd.sh] start
<4>[  502.822366] [S99sdmd.sh] end
<4>[  502.863661] [S99sync_action.sh] start
<4>[  502.868545] [S99sync_action.sh] end
<4>[  502.872621] [S99z_antivirus] start
<4>[  502.974284] [S99z_antivirus] end
<4>[  577.058160] ====== 2020-02-10 20:35:58 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  588.116362] UBI: attaching mtd6 to ubi2
<5>[  588.120221] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  588.126554] UBI: logical eraseblock size:    126976 bytes
<5>[  588.131974] UBI: smallest flash I/O unit:    2048
<5>[  588.136727] UBI: VID header offset:          2048 (aligned 2048)
<5>[  588.142757] UBI: data offset:                4096
<5>[  588.257052] UBI: max. sequence number:       224
<5>[  588.272480] UBI: attached mtd6 to ubi2
<5>[  588.276288] UBI: MTD device name:            "config"
<5>[  588.281358] UBI: MTD device size:            15 MiB
<5>[  588.286280] UBI: number of good PEBs:        120
<5>[  588.290910] UBI: number of bad PEBs:         0
<5>[  588.295382] UBI: number of corrupted PEBs:   0
<5>[  588.295409] UBI: max. allowed volumes:       128
<5>[  588.295413] UBI: wear-leveling threshold:    4096
<5>[  588.295417] UBI: number of internal volumes: 1
<5>[  588.295421] UBI: number of user volumes:     1
<5>[  588.295425] UBI: available PEBs:             0
<5>[  588.295429] UBI: total number of reserved PEBs: 120
<5>[  588.295433] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  588.295437] UBI: max/mean erase counter: 3/2
<5>[  588.295441] UBI: image sequence number:  1872325126
<5>[  588.296957] UBI: background thread "ubi_bgt2d" started, PID 15877
<5>[  588.509961] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  588.516355] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  588.523976] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  588.531417] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  588.531424] UBIFS: default compressor: lzo
<5>[  588.531429] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  588.768189] UBIFS: un-mount UBI device 2, volume 0
<5>[  588.821966] UBI: mtd6 is detached from ubi2
<6>[  933.864762] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[  933.957806] eth0: pfe_eth_close
<6>[  933.997226] hif_lib_client_unregister : client: 9fac03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[  934.006648] hif_process_client_req: unregister client_id 1
<6>[  934.012158] pfe_hif_client_unregister
<6>[  934.079428] eth1: pfe_eth_close
<6>[  934.117226] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[  934.126649] hif_process_client_req: unregister client_id 0
<6>[  934.132159] pfe_hif_client_unregister
<5>[  949.901221] UBI: attaching mtd6 to ubi2
<5>[  949.905073] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  949.911392] UBI: logical eraseblock size:    126976 bytes
<5>[  949.916806] UBI: smallest flash I/O unit:    2048
<5>[  949.921536] UBI: VID header offset:          2048 (aligned 2048)
<5>[  949.927570] UBI: data offset:                4096
<5>[  950.035224] UBI: max. sequence number:       225
<5>[  950.050476] UBI: attached mtd6 to ubi2
<5>[  950.054242] UBI: MTD device name:            "config"
<5>[  950.059342] UBI: MTD device size:            15 MiB
<5>[  950.064232] UBI: number of good PEBs:        120
<5>[  950.068871] UBI: number of bad PEBs:         0
<5>[  950.073327] UBI: number of corrupted PEBs:   0
<5>[  950.077791] UBI: max. allowed volumes:       128
<5>[  950.082419] UBI: wear-leveling threshold:    4096
<5>[  950.087134] UBI: number of internal volumes: 1
<5>[  950.091596] UBI: number of user volumes:     1
<5>[  950.096056] UBI: available PEBs:             0
<5>[  950.100546] UBI: total number of reserved PEBs: 120
<5>[  950.105446] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  950.111492] UBI: max/mean erase counter: 3/2
<5>[  950.115774] UBI: image sequence number:  1872325126
<5>[  950.120696] UBI: background thread "ubi_bgt2d" started, PID 25000
<5>[  950.264159] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  950.270209] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  950.277813] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  950.285143] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  950.290999] UBIFS: default compressor: lzo
<5>[  950.295122] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  950.772599] UBIFS: un-mount UBI device 2, volume 0
<5>[  950.823246] UBI: mtd6 is detached from ubi2
[Diagnostic] Wed Feb 12 21:01:32 CET 2020, 501.38
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000183] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060216] Mount-cache hash table entries: 512
<6>[    0.060718] Initializing cgroup subsys cpuacct
<6>[    0.060747] Initializing cgroup subsys devices
<6>[    0.060779] CPU: Testing write buffer coherency: ok
<6>[    0.060942] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060967] Calibrating local timer... 299.87MHz.
<4>[    0.120063]  Creating cpu1_hotplug_thread....
<4>[    0.120152]  cpu1_hotplug_thread Created
<6>[    0.120166] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121574] CPU1: Booted secondary processor
<6>[    0.180039] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180088] Brought up 2 CPUs
<6>[    0.180100] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180825] devtmpfs: initialized
<6>[    0.182239] xor: measuring software checksum speed
<6>[    0.229994]    arm4regs  :  2128.800 MB/sec
<6>[    0.279971]    8regs     :  1438.000 MB/sec
<6>[    0.329950]    32regs    :  1409.600 MB/sec
<6>[    0.329957] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330132] NET: Registered protocol family 16
<6>[    0.330607] L310 cache controller enabled
<6>[    0.330621] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330699] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330704] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330719] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330726] ARMv7 AUX CTRL(1): 0x41
<6>[    0.331237] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331246] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331261] Power Management Mode Support For C2000: 
<6>[    0.331571] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.344840] PCIe0: Link Up Success 
<6>[    0.344847] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.344853] comcerto_pcie_rc_int_init
<6>[    0.344894] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338282] PCIe1: Link Up Failed 
<7>[    4.338402] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338463] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338478] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338597] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338697] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338707] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338720] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350145] bio: create slab <bio-0> at 0
<4>[    4.519855] raid6: int32x1     25 MB/s
<4>[    4.688153] raid6: int32x2     48 MB/s
<4>[    4.858712] raid6: int32x4     82 MB/s
<4>[    5.028509] raid6: int32x8    113 MB/s
<4>[    5.028515] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028688] vgaarb: loaded
<5>[    5.028982] SCSI subsystem initialized
<7>[    5.029118] libata version 3.00 loaded.
<6>[    5.029302] usbcore: registered new interface driver usbfs
<6>[    5.029375] usbcore: registered new interface driver hub
<6>[    5.029467] usbcore: registered new device driver usb
<6>[    5.029700] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030140] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030526] Switching to clocksource timer2
<5>[    5.030733] FS-Cache: Loaded
<6>[    5.030858] CacheFiles: Loaded
<6>[    5.031768] NET: Registered protocol family 2
<6>[    5.031964] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032592] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032777] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032935] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032941] TCP reno registered
<6>[    5.032950] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032980] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033222] NET: Registered protocol family 1
<6>[    5.033510] RPC: Registered named UNIX socket transport module.
<6>[    5.033517] RPC: Registered udp transport module.
<6>[    5.033522] RPC: Registered tcp transport module.
<6>[    5.033528] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033550] PCI: CLS 32 bytes, default 32
<6>[    6.072658] membuf_init: created membuf device(253, 0)
<6>[    6.072939] audit: initializing netlink socket (disabled)
<5>[    6.072968] type=2000 audit(6.070:1): initialized
<5>[    6.073936] VFS: Disk quotas dquot_6.5.2
<4>[    6.074075] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074686] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074941] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075629] fuse init (API version 7.17)
<6>[    6.075812] msgmni has been set to 932
<6>[    6.077517] async_tx: api initialized (async)
<6>[    6.077635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077644] io scheduler noop registered
<6>[    6.077649] io scheduler deadline registered
<6>[    6.077730] io scheduler cfq registered (default)
<6>[    6.078026] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.078371] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.375211] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025800] console [ttyS0] enabled
<6>[    7.135184] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231924] brd: module loaded
<6>[    7.321374] loop: module loaded
<6>[    7.325883] nbd: registered device at major 43
<6>[    7.335631] SCSI Media Changer driver v0.25 
<7>[    7.340018] ahci 0000:00:00.0: version 3.0
<4>[    7.340036] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345794] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352825] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.358361] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.366487] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.375551] scsi0 : ahci
<6>[    7.378465] scsi1 : ahci
<6>[    7.381183] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.388515] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395990] SATA Serdes: 48Mhz ref clk
<6>[    7.400238] Serdes2: Lane OK Passed
<4>[    7.403752] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.408439] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.416215] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.424788] scsi2 : ahci_platform
<6>[    7.428334] scsi3 : ahci_platform
<6>[    7.431820] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.439762] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.448645] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.458004] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465906] Fixed MDIO Bus: probed
<6>[    7.469368] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.673565] Core Release: 2.81a
<4>[    7.676715] Setting default values for core params
<6>[    7.790570] ata3: SATA link down (SStatus 0 SControl 330)
<6>[    7.796025] ata4: SATA link down (SStatus 0 SControl 330)
<4>[    7.881300] Using Buffer DMA mode
<4>[    7.884624] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.890472] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.896063] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.900458] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.905260] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.905274] drivers/usb/core/inode.c: creating file '001'
<6>[    7.905287] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.912382] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.917771] Init: Port Power? op_state=1
<4>[    7.921711] Init: Power Port (0)
<7>[    7.924981] usb usb1: default language 0x0409
<7>[    7.925000] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.925007] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.939065] usb usb1: Product: DWC OTG Controller
<6>[    7.940577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.941207] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.941215] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    7.941779] ata1.00: configured for UDMA/133
<5>[    7.942158] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    7.942171] ata1.00: set queue depth = 31
<4>[    7.942350] Check proc_name[ahci].
<5>[    7.942655] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    7.942991] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    7.942999] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    7.943200] sd 0:0:0:0: [sda] Write Protect is off
<7>[    7.943208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    7.943272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    7.987394]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.020282] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<5>[    8.020977] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.030244] usb usb1: SerialNumber: dwc_otg.0
<7>[    8.034895] usb usb1: usb_probe_device
<7>[    8.034905] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.034930] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.035031] hub 1-0:1.0: usb_probe_interface
<7>[    8.035038] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.035045] hub 1-0:1.0: USB hub found
<6>[    8.038814] hub 1-0:1.0: 1 port detected
<7>[    8.042761] hub 1-0:1.0: standalone hub
<7>[    8.042767] hub 1-0:1.0: ganged power switching
<7>[    8.042772] hub 1-0:1.0: individual port over-current protection
<7>[    8.042778] hub 1-0:1.0: Single TT
<7>[    8.042784] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.042791] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.042805] hub 1-0:1.0: local power source is good
<7>[    8.042812] hub 1-0:1.0: enabling power on all ports
<7>[    8.042958] drivers/usb/core/inode.c: creating file '001'
<7>[    8.043076] Module dwc_common_port init
<6>[    8.043192] mousedev: PS/2 mouse device common for all mice
<6>[    8.048993] i2c /dev entries driver
<4>[    8.052596] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.060424] comcerto_wdt: support registered
<6>[    8.064749] md: linear personality registered for level -1
<6>[    8.070249] md: raid0 personality registered for level 0
<6>[    8.075585] md: raid1 personality registered for level 1
<6>[    8.080918] md: raid10 personality registered for level 10
<6>[    8.086417] md: raid6 personality registered for level 6
<6>[    8.091747] md: raid5 personality registered for level 5
<6>[    8.097072] md: raid4 personality registered for level 4
<6>[    8.102403] md: multipath personality registered for level -4
<6>[    8.108517] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.117045] dm_crypt using the OCF for crypto acceleration.
<6>[    8.122823] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.128327] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.134885] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.140577] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.140581] 
<7>[    8.140611] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.149988] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.160591] ALSA device list:
<6>[    8.163570]   No soundcards found.
<6>[    8.167609] TCP cubic registered
<6>[    8.170863] NET: Registered protocol family 17
<6>[    8.175346] NET: Registered protocol family 15
<6>[    8.179802] Initializing NETLINK_KEY socket
<6>[    8.184014] NET: Registered protocol family 5
<6>[    8.188475] lib80211: common routines for IEEE802.11 drivers
<7>[    8.194160] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.194166] Registering the dns_resolver key type
<6>[    8.198927] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.206633] Clocks: disabled unused pll2
<6>[    8.210570] Clocks: disabled unused uart
<6>[    8.214502] Clocks: disabled unused gemtx
<6>[    8.218521] Clocks: disabled unused ipsec_spacc
<6>[    8.223071] Clocks: disabled unused dpi_cie
<6>[    8.227264] Clocks: disabled unused dpi_decomp
<6>[    8.231724] Clocks: disabled unused ntgref
<6>[    8.235829] Clocks: disabled unused pcie1
<6>[    8.239848] Clocks: disabled unused usb1
<6>[    8.243784] Clocks: disabled unused ext_phy0
<6>[    8.248064] Clocks: disabled unused ext_phy1
<6>[    8.252348] Clocks: disabled unused ext_phy2
<6>[    8.256627] Clocks: disabled unused tpi
<6>[    8.260472] Clocks: disabled unused csys
<6>[    8.264407] Clocks: disabled unused tsuntg
<6>[    8.268513] Clocks: disabled unused sata_occ
<6>[    8.272797] Clocks: disabled unused pcie_occ
<6>[    8.277077] Clocks: disabled unused sgmii_occ
<7>[    8.290610] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290635] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290639] 
<7>[    8.299121] hub 1-0:1.0: over-current change on port 1
<7>[    8.400595] hub 1-0:1.0: enabling power on all ports
<4>[    8.482364] Registering CPUFreq(comcerto)
<4>[    8.486670] Please be patient, while OpenWrt loads ...
<6>[    8.540589] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.547406] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.554230] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.562128] ata2.00: configured for UDMA/133
<5>[    8.566787] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.574926] ata2.00: set queue depth = 31
<4>[    8.579147] Check proc_name[ahci].
<5>[    8.582783] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.582880] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.595978] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.601493] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.606301] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.606378] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.665746]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.671174] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.693364] Freeing init memory: 13476K
<6>[    9.206722] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.213472] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.474611] RTC_TIME:Wed Feb 12 20:53:21 2020  0.000000 seconds
<6>[    9.500620] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.505272] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.511236] Creating 2 MTD partitions on "spi0.0":
<5>[    9.516043] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.521808] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.532144] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.539229] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.544425] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.553069] Using default values for hw ecc
<4>[    9.560694] Bad block table not found for chip 0
<4>[    9.568695] Bad block table not found for chip 0
<6>[    9.573330] Scanning device for bad blocks
<4>[    9.578474] Bad eraseblock 18 at 0x000000240000
<4>[    9.585960] Bad eraseblock 72 at 0x000000900000
<4>[    9.605630] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.611946] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.642805] Bad eraseblock 863 at 0x000006be0000
<4>[    9.668435] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.688181] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.835939] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.845463] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.851780] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.858239] Creating 5 MTD partitions on "comcertonand":
<5>[    9.863599] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.869883] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.876261] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.882471] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.888812] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.901781] usbcore: registered new interface driver usbhid
<6>[    9.907371] usbhid: USB HID core driver
<6>[    9.916901] usbcore: registered new interface driver usblp
<6>[    9.929494] ## xhci_plat_probe
<6>[    9.932606] ### comcerto_start_xhci
<6>[    9.936115] USB3.0 clock selected: internal
<6>[    9.943566] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.948482] drivers/usb/core/inode.c: creating file '002'
<6>[    9.948502] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.955724] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.961104] usb usb2: default language 0x0409
<7>[    9.961124] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.961131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.967939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.975192] usb usb2: Product: xHCI Host Controller
<6>[    9.980083] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.985501] usb usb2: SerialNumber: xhci-hcd
<7>[    9.990040] usb usb2: usb_probe_device
<7>[    9.990050] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.990061] xHCI xhci_add_endpoint called for root hub
<7>[    9.990068] xHCI xhci_check_bandwidth called for root hub
<7>[    9.990088] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.990177] hub 2-0:1.0: usb_probe_interface
<7>[    9.990184] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.990191] hub 2-0:1.0: USB hub found
<6>[    9.993985] hub 2-0:1.0: 1 port detected
<7>[    9.997919] hub 2-0:1.0: standalone hub
<7>[    9.997924] hub 2-0:1.0: no power switching (usb 1.0)
<7>[    9.997929] hub 2-0:1.0: individual port over-current protection
<7>[    9.997935] hub 2-0:1.0: Single TT
<7>[    9.997942] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    9.997949] hub 2-0:1.0: power on to power good time: 20ms
<7>[    9.997963] hub 2-0:1.0: local power source is good
<7>[    9.997969] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[    9.998126] drivers/usb/core/inode.c: creating file '001'
<6>[    9.998194] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.003125] drivers/usb/core/inode.c: creating file '003'
<6>[   10.003141] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.010255] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.010267] usb usb3: default language 0x0409
<7>[   10.010284] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.010291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.017119] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.024370] usb usb3: Product: xHCI Host Controller
<6>[   10.029260] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.034679] usb usb3: SerialNumber: xhci-hcd
<7>[   10.039194] usb usb3: usb_probe_device
<7>[   10.039203] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.039212] xHCI xhci_add_endpoint called for root hub
<7>[   10.039218] xHCI xhci_check_bandwidth called for root hub
<7>[   10.039236] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.039324] hub 3-0:1.0: usb_probe_interface
<7>[   10.039331] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.039337] hub 3-0:1.0: USB hub found
<6>[   10.043129] hub 3-0:1.0: 1 port detected
<7>[   10.047062] hub 3-0:1.0: standalone hub
<7>[   10.047067] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.047073] hub 3-0:1.0: individual port over-current protection
<7>[   10.047081] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.047088] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.047100] hub 3-0:1.0: local power source is good
<7>[   10.047106] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.047260] drivers/usb/core/inode.c: creating file '001'
<6>[   10.054719] Initializing USB Mass Storage driver...
<6>[   10.059720] usbcore: registered new interface driver usb-storage
<6>[   10.065756] USB Mass Storage support registered.
<7>[   10.090602] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.140632] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.191358] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.191389] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.310638] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.333102] usb 2-1: default language 0x0409
<7>[   10.333614] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.333625] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.340356] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.347583] usb 2-1: Product: USB2.0 Hub
<6>[   10.351546] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.356482] usb 2-1: usb_probe_device
<7>[   10.356496] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.362782] usb 2-1: Successful Endpoint Configure command
<7>[   10.363071] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.363217] hub 2-1:1.0: usb_probe_interface
<7>[   10.363227] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.363238] hub 2-1:1.0: USB hub found
<6>[   10.367292] hub 2-1:1.0: 4 ports detected
<7>[   10.371353] hub 2-1:1.0: standalone hub
<7>[   10.371361] hub 2-1:1.0: individual port power switching
<7>[   10.371367] hub 2-1:1.0: individual port over-current protection
<7>[   10.394253] usb 2-1: Successful Endpoint Configure command
<7>[   10.394514] hub 2-1:1.0: TT per port
<7>[   10.394524] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.394530] hub 2-1:1.0: Port indicators are supported
<7>[   10.394537] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.394812] usb 2-1: Successful Endpoint Configure command
<7>[   10.395032] hub 2-1:1.0: local power source is good
<7>[   10.395043] hub 2-1:1.0: enabling power on all ports
<7>[   10.396214] drivers/usb/core/inode.c: creating file '002'
<7>[   10.396313] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.396341] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.439399] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.445832] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<4>[   10.487401] flashcache: flashcache-1.0-dummy initialized
<7>[   10.493760] hub 2-1:1.0: port 4: status 0301 change 0001
<6>[   10.520714] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.542490] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.542664] usb 3-1: default language 0x0409
<7>[   10.543196] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.543211] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.549935] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.557102] usb 3-1: Product: USB3.0 Hub
<6>[   10.561049] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.565855] usb 3-1: usb_probe_device
<7>[   10.565866] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.570231] usb 3-1: Successful Endpoint Configure command
<7>[   10.570414] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.570811] hub 3-1:1.0: usb_probe_interface
<7>[   10.570819] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.570825] hub 3-1:1.0: USB hub found
<6>[   10.574862] hub 3-1:1.0: 4 ports detected
<7>[   10.578885] hub 3-1:1.0: standalone hub
<7>[   10.578891] hub 3-1:1.0: individual port power switching
<7>[   10.578897] hub 3-1:1.0: individual port over-current protection
<7>[   10.578905] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.578912] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.579100] usb 3-1: Successful Endpoint Configure command
<7>[   10.579245] hub 3-1:1.0: local power source is good
<7>[   10.579355] hub 3-1:1.0: enabling power on all ports
<7>[   10.580099] drivers/usb/core/inode.c: creating file '002'
<7>[   10.590602] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.590828] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.651768] UBI: attaching mtd3 to ubi0
<5>[   10.655621] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.661920] UBI: logical eraseblock size:    126976 bytes
<5>[   10.667332] UBI: smallest flash I/O unit:    2048
<5>[   10.672059] UBI: VID header offset:          2048 (aligned 2048)
<6>[   10.672252] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.684711] UBI: data offset:                4096
<7>[   10.694643] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.695306] usb 2-1.4: default language 0x0409
<7>[   10.702639] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.702648] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.709545] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.716884] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.723783] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.729630] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.734789] usb 2-1.4: usb_probe_device
<7>[   10.734799] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.734865] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.746219] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.746911] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.747025] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.747032] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.072450] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.072606] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.088376] drivers/usb/core/inode.c: creating file '003'
<7>[   11.088456] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.167131] UBI: max. sequence number:       2
<5>[   12.183916] UBI: attached mtd3 to ubi0
<5>[   12.187676] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.193379] UBI: MTD device size:            216 MiB
<5>[   12.198356] UBI: number of good PEBs:        1723
<5>[   12.203078] UBI: number of bad PEBs:         5
<5>[   12.207533] UBI: number of corrupted PEBs:   0
<5>[   12.211992] UBI: max. allowed volumes:       128
<5>[   12.216620] UBI: wear-leveling threshold:    4096
<5>[   12.221340] UBI: number of internal volumes: 1
<5>[   12.225794] UBI: number of user volumes:     1
<5>[   12.230246] UBI: available PEBs:             0
<5>[   12.234706] UBI: total number of reserved PEBs: 1723
<5>[   12.239682] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.245796] UBI: max/mean erase counter: 22/14
<5>[   12.250251] UBI: image sequence number:  1535285440
<5>[   12.255159] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.377271] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.383396] UBIFS: mounted read-only
<5>[   12.386982] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.395019] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.402353] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.408200] UBIFS: default compressor: lzo
<5>[   12.412310] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.767887] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.829634] UBI: mtd3 is detached from ubi0
<6>[   33.842604] usbcore: registered new interface driver usbserial
<6>[   33.848457] usbserial: USB Serial Driver core
<6>[   33.858424] USB Serial support registered for pl2303
<6>[   33.863528] usbcore: registered new interface driver pl2303
<6>[   33.869114] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.881011] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.894709] ufsd: module license 'Commercial product' taints kernel.
<4>[   33.901107] Disabling lock debugging due to kernel taint
<5>[   33.927495] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   33.927501] NTFSJ support included
<5>[   33.927503] exFAT support included
<5>[   33.927505] Hfs+J support included
<5>[   33.927507] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   33.954743] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   33.959200] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.235203] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.244512] udev: starting version 140
<6>[   34.251409] pfe_module_init
<6>[   34.254262] pfe_platform_probe
<6>[   34.258357] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.264206] pfe_probe
<6>[   34.266485] PFE Driver version:
<6>[   34.266488] pfe_ctrl_10_00_4
<6>[   34.266490] built with pfe sources version: pfe_10_00_3
<6>[   34.277762] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.287360] pfe_hw_init
<6>[   34.289812] CLASS version: 20
<6>[   34.292793] TMU version: 1011231
<6>[   34.296027] BMU1 version: 21
<6>[   34.298914] BMU2 version: 21
<6>[   34.301805] EMAC1 network cfg: 80000
<6>[   34.305388] EMAC2 network cfg: 80000
<6>[   34.308971] EMAC3 network cfg: 80000
<6>[   34.312558] EGPI1 version: 50
<6>[   34.315532] EGPI2 version: 50
<6>[   34.318505] EGPI3 version: 50
<6>[   34.321483] HGPI version: 50
<6>[   34.324369] GPT version: 0
<6>[   34.327081] HIF version: 10
<6>[   34.329880] HIF NOPCY version: 10
<6>[   34.333206] UTIL version: 20
<6>[   34.336093] bmu_init(1) done
<6>[   34.338980] bmu_init(2) done
<6>[   34.348324] class_init() done
<6>[   34.351307] tmu_init: mem init
<6>[   34.354369] tmu_init: lmem init
<6>[   34.357562] tmu_init() done
<6>[   34.360361] util_init() done
<6>[   34.363255] gpi_init(1) done
<6>[   34.366143] gpi_init(2) done
<6>[   34.369031] gpi_init(3) done
<6>[   34.371924] gpi_init(hif) done
<6>[   34.374983] bmu_enable(1) done
<6>[   34.378044] bmu_enable(2) done
<6>[   34.381109] pfe_hif_lib_init
<6>[   34.384167] pfe_hif_init
<6>[   34.386706] pfe_hif_alloc_descr
<6>[   34.389952] pfe_hif_init_buffers
<6>[   34.393319] pfe_firmware_init
<6>[   34.555985] pfe_load_elf
<3>[   34.558538] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.590014] PFE binary version: pfe_10_00_3
<6>[   34.594228] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.600697] pfe_load_elf
<6>[   34.604612] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.609936] pfe_load_elf
<6>[   34.614268] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.619806] pfe_ctrl_init
<6>[   34.640525] pfe_ctrl_init finished
<6>[   34.640531] pfe_ctrl_timer
<6>[   34.646690] pfe_eth_init
<6>[   34.657865] Comcerto MDIO Bus: probed
<6>[   34.662835] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.671331] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.678157] pfe_vwd_init
<6>[   34.680858] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.685841] pfe_vwd_driver_init: start
<4>[   34.689604] pfe_vwd_up: start
<6>[   34.692655] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.699726] pfe_vwd_driver_init: end
<6>[   34.703327] pfe_pcap_init
<6>[   34.748909] eth0: pfe_eth_open
<6>[   34.752415] hif_process_client_req: register client_id 0
<6>[   34.757756] pfe_hif_client_register
<6>[   34.761307] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.769626] eth0: pfe_gemac_init
<6>[   34.775127] eth0: pfe_eth_close
<6>[   34.810756] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.820180] hif_process_client_req: unregister client_id 0
<6>[   34.825689] pfe_hif_client_unregister
<6>[   34.829866] eth1: pfe_eth_open
<6>[   34.833060] hif_process_client_req: register client_id 1
<6>[   34.838385] pfe_hif_client_register
<6>[   34.841893] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.850181] eth1: pfe_gemac_init
<6>[   34.854055] eth1: pfe_eth_close
<6>[   34.890562] hif_lib_client_unregister : client: 9f0c03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.899982] hif_process_client_req: unregister client_id 1
<6>[   34.905488] pfe_hif_client_unregister
<6>[   35.384809] kjournald starting.  Commit interval 5 seconds
<6>[   35.385087] EXT3-fs (sda1): using internal journal
<6>[   35.385098] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.777480] kjournald starting.  Commit interval 5 seconds
<6>[   35.785428] EXT3-fs (sda1): using internal journal
<6>[   35.790237] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.292825] kjournald starting.  Commit interval 5 seconds
<6>[   36.298356] EXT3-fs (sdb1): using internal journal
<6>[   36.303183] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.645156] md: md9 stopped.
<6>[   36.650583] md: bind<sdb1>
<6>[   36.653623] md: bind<sda1>
<6>[   36.659367] bio: create slab <bio-1> at 1
<6>[   36.663666] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.669229] created bitmap (1 pages) for device md9
<6>[   36.674319] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.702188] md9: detected capacity change from 0 to 542769152
<6>[   37.762063]  md9: unknown partition table
<6>[   38.033514] kjournald starting.  Commit interval 5 seconds
<6>[   38.040793] EXT3-fs (md9): using internal journal
<6>[   38.045519] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.375225] md: md13 stopped.
<6>[   38.383765] md: bind<sdb4>
<6>[   38.386784] md: bind<sda4>
<6>[   38.392658] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.398312] created bitmap (1 pages) for device md13
<6>[   38.403513] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.448061] md13: detected capacity change from 0 to 469893120
<4>[   57.606543] set stripe cache size 1024
<4>[   57.610971] STRIPE_CACHE_SIZE is 1024
<6>[   58.648460] md: bind<sda2>
<6>[   58.656070] md: bind<sdb2>
<6>[   58.661944] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   58.667628] created bitmap (1 pages) for device md256
<6>[   58.672924] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   58.700821] md256: detected capacity change from 0 to 542834688
<6>[   58.763508]  md256: unknown partition table
<6>[   58.833106] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   59.521753] md: bind<sda5>
<6>[   59.526265] md: bind<sdb5>
<6>[   59.532251] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   59.559293] created bitmap (1 pages) for device md322
<6>[   59.570273] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   59.624597] md322: detected capacity change from 0 to 7408779264
<6>[   59.687184]  md322: unknown partition table
<6>[   59.758187] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   60.063978]  md13: unknown partition table
<6>[   60.385351] md: md1 stopped.
<6>[   60.400384] md: bind<sdb3>
<6>[   60.403402] md: bind<sda3>
<6>[   60.409207] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   60.414654] md1: detected capacity change from 0 to 5990981238784
<6>[   60.484710]  md1: unknown partition table
<6>[   71.073900] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[   77.970531] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   81.827816] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   82.877777] [S30mountall] start
<5>[   83.304608] UBI: attaching mtd3 to ubi0
<5>[   83.308461] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   83.314797] UBI: logical eraseblock size:    126976 bytes
<5>[   83.320210] UBI: smallest flash I/O unit:    2048
<5>[   83.324949] UBI: VID header offset:          2048 (aligned 2048)
<5>[   83.330979] UBI: data offset:                4096
<5>[   84.814187] UBI: max. sequence number:       2
<5>[   84.831080] UBI: attached mtd3 to ubi0
<5>[   84.834845] UBI: MTD device name:            "boot1_rootfs2"
<5>[   84.840520] UBI: MTD device size:            216 MiB
<5>[   84.845511] UBI: number of good PEBs:        1723
<5>[   84.850226] UBI: number of bad PEBs:         5
<5>[   84.854686] UBI: number of corrupted PEBs:   0
<5>[   84.859140] UBI: max. allowed volumes:       128
<5>[   84.863773] UBI: wear-leveling threshold:    4096
<5>[   84.868488] UBI: number of internal volumes: 1
<5>[   84.872946] UBI: number of user volumes:     1
<5>[   84.877400] UBI: available PEBs:             0
<5>[   84.881858] UBI: total number of reserved PEBs: 1723
<5>[   84.886834] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   84.892946] UBI: max/mean erase counter: 22/14
<5>[   84.897401] UBI: image sequence number:  1535285440
<5>[   84.902305] UBI: background thread "ubi_bgt0d" started, PID 1604
<5>[   85.034867] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   85.041004] UBIFS: mounted read-only
<5>[   85.044591] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   85.052628] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   85.059956] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   85.065810] UBIFS: default compressor: lzo
<5>[   85.069916] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  107.147821] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.209770] UBI: mtd3 is detached from ubi0
<5>[  107.784805] UBI: attaching mtd3 to ubi0
<5>[  107.788658] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  107.794973] UBI: logical eraseblock size:    126976 bytes
<5>[  107.800387] UBI: smallest flash I/O unit:    2048
<5>[  107.805126] UBI: VID header offset:          2048 (aligned 2048)
<5>[  107.811167] UBI: data offset:                4096
<5>[  109.294000] UBI: max. sequence number:       2
<5>[  109.310853] UBI: attached mtd3 to ubi0
<5>[  109.314618] UBI: MTD device name:            "boot1_rootfs2"
<5>[  109.320292] UBI: MTD device size:            216 MiB
<5>[  109.325283] UBI: number of good PEBs:        1723
<5>[  109.329999] UBI: number of bad PEBs:         5
<5>[  109.334462] UBI: number of corrupted PEBs:   0
<5>[  109.338916] UBI: max. allowed volumes:       128
<5>[  109.343549] UBI: wear-leveling threshold:    4096
<5>[  109.348264] UBI: number of internal volumes: 1
<5>[  109.352722] UBI: number of user volumes:     1
<5>[  109.357176] UBI: available PEBs:             0
<5>[  109.361633] UBI: total number of reserved PEBs: 1723
<5>[  109.366609] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  109.372721] UBI: max/mean erase counter: 22/14
<5>[  109.377176] UBI: image sequence number:  1535285440
<5>[  109.382080] UBI: background thread "ubi_bgt0d" started, PID 1737
<5>[  109.511668] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  109.517782] UBIFS: mounted read-only
<5>[  109.521381] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  109.529408] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  109.536748] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  109.542603] UBIFS: default compressor: lzo
<5>[  109.546709] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  109.621447] UBIFS: un-mount UBI device 0, volume 0
<5>[  109.666628] UBI: mtd3 is detached from ubi0
<6>[  109.889870] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  125.764085] UBI: attaching mtd6 to ubi2
<5>[  125.767947] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  125.774250] UBI: logical eraseblock size:    126976 bytes
<5>[  125.779664] UBI: smallest flash I/O unit:    2048
<5>[  125.784419] UBI: VID header offset:          2048 (aligned 2048)
<5>[  125.790443] UBI: data offset:                4096
<5>[  126.009787] UBI: max. sequence number:       280
<5>[  126.065412] UBI: attached mtd6 to ubi2
<5>[  126.069177] UBI: MTD device name:            "config"
<5>[  126.074272] UBI: MTD device size:            15 MiB
<5>[  126.079162] UBI: number of good PEBs:        120
<5>[  126.083830] UBI: number of bad PEBs:         0
<5>[  126.088286] UBI: number of corrupted PEBs:   0
<5>[  126.092753] UBI: max. allowed volumes:       128
<5>[  126.097387] UBI: wear-leveling threshold:    4096
<5>[  126.102110] UBI: number of internal volumes: 1
<5>[  126.106565] UBI: number of user volumes:     1
<5>[  126.111028] UBI: available PEBs:             0
<5>[  126.115482] UBI: total number of reserved PEBs: 120
<5>[  126.120372] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  126.126400] UBI: max/mean erase counter: 4/3
<5>[  126.130686] UBI: image sequence number:  1872325126
<5>[  126.135597] UBI: background thread "ubi_bgt2d" started, PID 2178
<5>[  126.403705] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  126.409737] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  126.417365] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  126.424707] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  126.430564] UBIFS: default compressor: lzo
<5>[  126.434672] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  127.205142] UBIFS: un-mount UBI device 2, volume 0
<5>[  127.281663] UBI: mtd6 is detached from ubi2
<4>[  127.550771] [S30mountall] end
<4>[  127.560527] [S31init_hardware] start
<6>[  127.799324] sysinfo: Module loaded.
<6>[  128.598462] fnotify: Load file notify kernel module.
<6>[  129.949826] usbcore: registered new interface driver snd-usb-audio
<6>[  129.975489] usbcore: registered new interface driver snd-usb-caiaq
<6>[  129.996957] Linux video capture interface: v2.00
<6>[  130.025719] usbcore: registered new interface driver uvcvideo
<6>[  130.031524] USB Video Class driver (1.1.1)
<6>[  130.271370] NET: Registered protocol family 10
<4>[  133.226815] [S31init_hardware] end
<4>[  133.230844] [S32init_mac_addr] start
<6>[  134.370173] eth0: pfe_eth_open
<6>[  134.373397] hif_process_client_req: register client_id 1
<6>[  134.378723] pfe_hif_client_register
<6>[  134.382237] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  134.390527] eth0: pfe_gemac_init
<6>[  134.394568] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  134.999424] eth1: pfe_eth_open
<6>[  135.002646] hif_process_client_req: register client_id 0
<6>[  135.007972] pfe_hif_client_register
<6>[  135.011489] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  135.019778] eth1: pfe_gemac_init
<6>[  135.023609] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  137.025887] [S32init_mac_addr] end
<4>[  137.030721] [S33sysinit] start
<6>[  137.390779] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  137.396196] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  149.160566] eth0: no IPv6 routers present
<5>[  158.231594] UBI: attaching mtd6 to ubi2
<5>[  158.235448] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  158.241749] UBI: logical eraseblock size:    126976 bytes
<5>[  158.247162] UBI: smallest flash I/O unit:    2048
<5>[  158.251888] UBI: VID header offset:          2048 (aligned 2048)
<5>[  158.257910] UBI: data offset:                4096
<5>[  158.365694] UBI: max. sequence number:       281
<5>[  158.381005] UBI: attached mtd6 to ubi2
<5>[  158.384771] UBI: MTD device name:            "config"
<5>[  158.389837] UBI: MTD device size:            15 MiB
<5>[  158.394748] UBI: number of good PEBs:        120
<5>[  158.399377] UBI: number of bad PEBs:         0
<5>[  158.403839] UBI: number of corrupted PEBs:   0
<5>[  158.408292] UBI: max. allowed volumes:       128
<5>[  158.412926] UBI: wear-leveling threshold:    4096
<5>[  158.417642] UBI: number of internal volumes: 1
<5>[  158.422105] UBI: number of user volumes:     1
<5>[  158.426558] UBI: available PEBs:             0
<5>[  158.431019] UBI: total number of reserved PEBs: 120
<5>[  158.435908] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  158.441936] UBI: max/mean erase counter: 4/3
<5>[  158.446215] UBI: image sequence number:  1872325126
<5>[  158.451144] UBI: background thread "ubi_bgt2d" started, PID 2834
<5>[  158.587464] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  158.593508] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  158.601111] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  158.608441] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  158.614293] UBIFS: default compressor: lzo
<5>[  158.618399] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  158.638727] UBIFS: un-mount UBI device 2, volume 0
<4>[  243.456745] [S33sysinit] end
<4>[  243.460224] [S34shutdown_check] start
<4>[  243.735230] [S34shutdown_check] end
<4>[  243.739280] [S35init_disk] start
<5>[  244.055260] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  244.061305] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  244.068898] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  244.076236] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  244.082094] UBIFS: default compressor: lzo
<5>[  244.086200] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  244.406472] UBIFS: un-mount UBI device 2, volume 0
<5>[  244.456653] UBI: mtd6 is detached from ubi2
<4>[  245.973114] [S35init_disk] end
<4>[  245.976830] [S40init_network] start
<4>[  245.990240] [S40init_network] end
<4>[  245.994271] [S42hostname] start
<4>[  246.461014] [S42hostname] end
<4>[  246.464552] [S45network] start
<5>[  256.507172] Bridge firewalling registered
<6>[  257.046211] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  257.053421] bonding: MII link monitoring set to 100 ms
<6>[  264.797329] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  273.794233] [S45network] end
<4>[  273.797679] [S46iSCSItrgt] start
<4>[  279.112226] [S46iSCSItrgt] end
<4>[  279.115847] [S46iscsiinit] start
<6>[  279.145556] Loading iSCSI transport class v2.0-870.
<5>[  279.183664] iscsi: registered transport (tcp)
<4>[  280.619858] [S46iscsiinit] end
<4>[  280.623823] [S55urandom] start
<4>[  280.663127] [S55urandom] end
<4>[  280.666821] [S56mariadb] start
<4>[  287.124188] [S56mariadb] end
<4>[  287.127671] [S56start_service] start
<4>[  287.225415] [S56start_service] end
<4>[  287.229390] [S57init_qpkg] start
<4>[  414.667841] [S57init_qpkg] end
<4>[  414.671505] [S57ldap] start
<4>[  414.709988] [S57ldap] end
<4>[  414.713280] [S58dbus] start
<4>[  416.898077] [S58dbus] end
<4>[  416.901335] [S58nsswitch] start
<4>[  417.088066] [S58nsswitch] end
<4>[  417.091647] [S58printer] start
<4>[  417.134879] [S58printer] end
<4>[  422.142340] [S59Qthttpd] start
<4>[  437.674130] [S59Qthttpd] end
<4>[  437.679071] [S62cupsd] start
<4>[  438.945625] [S62cupsd] end
<4>[  438.948899] [S62ntpd] start
<4>[  439.030651] [S62ntpd] end
<4>[  439.033814] [S62smb] start
<4>[  448.283008] ==== memory usage ====
<4>[  448.311178] MemTotal:         490756 kB
<4>[  448.315050] MemFree:           65424 kB
<4>[  448.318907] Buffers:           18440 kB
<4>[  448.330629] Cached:           284152 kB
<4>[  448.334640] SwapCached:            8 kB
<4>[  448.338506] Active:           124648 kB
<4>[  448.342416] Inactive:         248460 kB
<4>[  448.346311] Active(anon):      57792 kB
<4>[  448.350191] Inactive(anon):    68180 kB
<4>[  448.356090] Active(file):      66856 kB
<4>[  448.359959] Inactive(file):   180280 kB
<4>[  448.363849] Unevictable:        2012 kB
<4>[  448.367709] Mlocked:            2012 kB
<4>[  448.371581] SwapTotal:      24542452 kB
<4>[  448.375445] SwapFree:       24542224 kB
<4>[  448.379301] Dirty:               168 kB
<4>[  448.383203] Writeback:             0 kB
<4>[  448.387062] AnonPages:         72560 kB
<4>[  448.391169] Mapped:            18176 kB
<4>[  448.395027] Shmem:             55308 kB
<4>[  448.398883] Slab:              34296 kB
<4>[  448.402811] SReclaimable:      22608 kB
<4>[  448.406670] SUnreclaim:        11688 kB
<4>[  448.410526] KernelStack:        1816 kB
<4>[  448.414398] PageTables:         1608 kB
<4>[  448.418254] NFS_Unstable:          0 kB
<4>[  448.422130] Bounce:                0 kB
<4>[  448.425988] WritebackTmp:          0 kB
<4>[  448.429848] CommitLimit:    24787828 kB
<4>[  448.433719] Committed_AS:    1183232 kB
<4>[  448.437577] VmallocTotal:    1302528 kB
<4>[  448.441450] VmallocUsed:       61368 kB
<4>[  448.445315] VmallocChunk:    1212348 kB
<4>[  448.465068] Node 0, zone      DMA
<4>[  448.468423]   pages free     10967
<4>[  448.471897]         min      366
<4>[  448.475153]         low      457
<4>[  448.478399]         high     549
<4>[  448.481695]         scanned  0
<4>[  448.484772]         spanned  11264
<4>[  448.488193]         present  11154
<4>[  448.491650]     nr_free_pages 10967
<4>[  448.495160]     nr_inactive_anon 0
<4>[  448.498580]     nr_active_anon 0
<4>[  448.501863]     nr_inactive_file 0
<4>[  448.505289]     nr_active_file 0
<4>[  448.508536]     nr_unevictable 0
<4>[  448.511813]     nr_mlock     0
<4>[  448.514886]     nr_anon_pages 0
<4>[  448.518045]     nr_mapped    0
<4>[  448.521156]     nr_file_pages 0
<4>[  448.524317]     nr_dirty     0
<4>[  448.527388]     nr_writeback 0
<4>[  448.530460]     nr_slab_reclaimable 0
<4>[  448.534259]     nr_slab_unreclaimable 0
<4>[  448.538120]     nr_page_table_pages 0
<4>[  448.541901]     nr_kernel_stack 0
<4>[  448.545238]     nr_unstable  0
<4>[  448.548310]     nr_bounce    0
<4>[  448.551415]     nr_vmscan_write 0
<4>[  448.554752]     nr_vmscan_immediate_reclaim 0
<4>[  448.559136]     nr_writeback_temp 0
<4>[  448.562670]     nr_isolated_anon 0
<4>[  448.566096]     nr_isolated_file 0
<4>[  448.569518]     nr_shmem     0
<4>[  448.572616]     nr_dirtied   0
<4>[  448.575690]     nr_written   0
<4>[  448.578764]     nr_anon_transparent_hugepages 0
<4>[  448.583393]         protection: (0, 443, 443)
<4>[  448.587776]   pagesets
<4>[  448.590153]     cpu: 0
<4>[  448.592558]               count: 2
<4>[  448.595981]               high:  6
<4>[  448.599402]               batch: 1
<4>[  448.602868]   vm stats threshold: 4
<4>[  448.606381]     cpu: 1
<4>[  448.608756]               count: 5
<4>[  448.612203]               high:  6
<4>[  448.615626]               batch: 1
<4>[  448.619051]   vm stats threshold: 4
<4>[  448.622583]   all_unreclaimable: 0
<4>[  448.626005]   start_pfn:         0
<4>[  448.629426]   inactive_ratio:    1
<4>[  448.632868] Node 0, zone   Normal
<4>[  448.636204]   pages free     5257
<4>[  448.639542]         min      3729
<4>[  448.642963]         low      4661
<4>[  448.646300]         high     5593
<4>[  448.649634]         scanned  0
<4>[  448.652737]         spanned  119808
<4>[  448.656247]         present  113518
<4>[  448.662097]     nr_free_pages 5257
<4>[  448.665533]     nr_inactive_anon 17045
<4>[  448.669302]     nr_active_anon 14448
<4>[  448.672982]     nr_inactive_file 45070
<4>[  448.676804]     nr_active_file 16714
<4>[  448.680601]     nr_unevictable 503
<4>[  448.684030]     nr_mlock     503
<4>[  448.687278]     nr_anon_pages 18140
<4>[  448.690825]     nr_mapped    4544
<4>[  448.694166]     nr_file_pages 75650
<4>[  448.697675]     nr_dirty     42
<4>[  448.700872]     nr_writeback 0
<4>[  448.703949]     nr_slab_reclaimable 5652
<4>[  448.707893]     nr_slab_unreclaimable 2922
<4>[  448.712093]     nr_page_table_pages 383
<4>[  448.715955]     nr_kernel_stack 227
<4>[  448.719462]     nr_unstable  0
<4>[  448.722564]     nr_bounce    0
<4>[  448.725639]     nr_vmscan_write 57
<4>[  448.729060]     nr_vmscan_immediate_reclaim 0
<4>[  448.733466]     nr_writeback_temp 0
<4>[  448.736976]     nr_isolated_anon 0
<4>[  448.740407]     nr_isolated_file 0
<4>[  448.743927]     nr_shmem     13827
<4>[  448.747352]     nr_dirtied   244640
<4>[  448.750894]     nr_written   242446
<4>[  448.754404]     nr_anon_transparent_hugepages 0
<4>[  448.758962]         protection: (0, 0, 0)
<4>[  448.763017]   pagesets
<4>[  448.765395]     cpu: 0
<4>[  448.767770]               count: 69
<4>[  448.771303]               high:  186
<4>[  448.774903]               batch: 31
<4>[  448.778410]   vm stats threshold: 12
<4>[  448.782029]     cpu: 1
<4>[  448.784406]               count: 158
<4>[  448.788094]               high:  186
<4>[  448.791726]               batch: 31
<4>[  448.795236]   vm stats threshold: 12
<4>[  448.798835]   all_unreclaimable: 0
<4>[  448.802282]   start_pfn:         11264
<4>[  448.806052]   inactive_ratio:    1
<4>[  448.831394] Filename				Type		Size	Used	Priority
<4>[  448.836054] /dev/md256                              partition	530108	228	-1
<4>[  448.843169] /dev/md322                              partition	7235132	0	-2
<4>[  448.850082] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  448.873621]               total         used         free       shared      buffers
<4>[  448.873628]   Mem:       490756       425896        64860            0        18440
<4>[  448.873632]  Swap:     24542452          228     24542224
<4>[  448.873635] Total:     25033208       426124     24607084
<4>[  448.915445] ==== end ====
<4>[  463.738552] [S62smb] end
<4>[  463.741897] [S64MediaService] start
<4>[  464.278291] [S64MediaService] end
<4>[  464.282626] [S65thttpd] start
<4>[  472.165649] [S65thttpd] end
<4>[  472.168970] [S66ImRd] start
<4>[  472.173438] [S66ImRd] end
<4>[  472.176821] [S66wfm_thttpd] start
<4>[  474.915840] [S66wfm_thttpd] end
<4>[  474.919524] [S67ftp] start
<4>[  475.086891] [S67ftp] end
<4>[  475.089964] [S70crond] start
<4>[  475.094862] [S70crond] end
<4>[  475.098271] [S72logo] start
<4>[  475.102441] [S72logo] end
<4>[  475.105778] [S73ntpclient] start
<4>[  475.110475] [S73ntpclient] end
<4>[  475.127292] [S75stunnel] start
<4>[  475.137514] [S75stunnel] end
<4>[  475.160276] [S77recycled] start
<4>[  476.266991] [S77recycled] end
<4>[  476.270523] [S78qraid1] start
<4>[  476.278944] [S78qraid1] end
<4>[  476.288415] [S83ups] start
<4>[  476.307691] [S83ups] end
<4>[  476.311867] [S85login] start
<4>[  476.316043] [S85login] end
<4>[  476.343118] [S89bonjour] start
<4>[  476.359385] [S89bonjour] end
<4>[  476.376067] [S89wsd] start
<4>[  476.394324] [S89wsd] end
<4>[  489.130927] [S90twonkymedia] start
<4>[  489.135699] [S90twonkymedia] end
<4>[  489.139646] [S92lunportman] start
<4>[  489.144572] [S92lunportman] end
<4>[  489.148540] [S95snmp] start
<4>[  489.161389] [S95snmp] end
<4>[  489.164664] [S97upnpd] start
<4>[  489.168778] [S97upnpd] end
<4>[  489.199984] [S98init_nas] start
<5>[  497.136308] UBI: attaching mtd6 to ubi2
<5>[  497.140168] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  497.146493] UBI: logical eraseblock size:    126976 bytes
<5>[  497.151933] UBI: smallest flash I/O unit:    2048
<5>[  497.156652] UBI: VID header offset:          2048 (aligned 2048)
<5>[  497.162711] UBI: data offset:                4096
<5>[  497.301457] UBI: max. sequence number:       283
<5>[  497.316753] UBI: attached mtd6 to ubi2
<5>[  497.320518] UBI: MTD device name:            "config"
<5>[  497.325604] UBI: MTD device size:            15 MiB
<5>[  497.330493] UBI: number of good PEBs:        120
<5>[  497.335127] UBI: number of bad PEBs:         0
<5>[  497.339581] UBI: number of corrupted PEBs:   0
<5>[  497.344046] UBI: max. allowed volumes:       128
<5>[  497.348678] UBI: wear-leveling threshold:    4096
<5>[  497.353406] UBI: number of internal volumes: 1
<5>[  497.357862] UBI: number of user volumes:     1
<5>[  497.362322] UBI: available PEBs:             0
<5>[  497.366775] UBI: total number of reserved PEBs: 120
<5>[  497.371668] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  497.377690] UBI: max/mean erase counter: 4/3
<5>[  497.381973] UBI: image sequence number:  1872325126
<5>[  497.386875] UBI: background thread "ubi_bgt2d" started, PID 11679
<5>[  497.517459] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  497.523502] UBIFS: mounted read-only
<5>[  497.527089] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  497.534690] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  497.542024] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  497.547872] UBIFS: default compressor: lzo
<5>[  497.551985] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  497.564802] UBIFS: un-mount UBI device 2, volume 0
<5>[  497.620521] UBI: mtd6 is detached from ubi2
<4>[  499.914028] rule type=1, num=4
<4>[  503.897017] [S98init_nas] end
<4>[  503.900527] [S99atalk] start
<4>[  503.907713] [S99atalk] end
<4>[  503.921467] [S99cloudinstall_report_complete_daemon] start
<4>[  503.944108] [S99cloudinstall_report_complete_daemon] end
<4>[  503.950249] [S99init_iTune] start
<4>[  503.971862] [S99init_iTune] end
<4>[  503.991352] [S99mysqld] start
<4>[  504.008500] [S99mysqld] end
<4>[  504.041609] [S99nfs] start
<4>[  504.056919] [S99nfs] end
<4>[  504.060223] [S99porter] start
<4>[  504.093742] [S99porter] end
<4>[  504.111531] [S99qanalytic] start
<4>[  504.148758] [S99qanalytic] end
<4>[  504.173254] [S99qcloud] start
<4>[  504.189176] [S99qcloud] end
<4>[  504.241499] [S99qsyncman] start
<4>[  504.269239] [S99qsyncman] end
<4>[  504.311785] [S99sdmd.sh] start
<4>[  504.349145] [S99sdmd.sh] end
<4>[  504.377994] [S99sync_action.sh] start
<4>[  504.402260] [S99sync_action.sh] end
<4>[  504.452951] [S99z_antivirus] start
<4>[  504.485404] [S99z_antivirus] end
<4>[  590.855676] ====== 2020-02-12 21:03:02 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  619.932322] UBI: attaching mtd6 to ubi2
<5>[  619.936201] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  619.942520] UBI: logical eraseblock size:    126976 bytes
<5>[  619.947963] UBI: smallest flash I/O unit:    2048
<5>[  619.952686] UBI: VID header offset:          2048 (aligned 2048)
<5>[  619.958731] UBI: data offset:                4096
<5>[  620.069401] UBI: max. sequence number:       283
<5>[  620.084929] UBI: attached mtd6 to ubi2
<5>[  620.088728] UBI: MTD device name:            "config"
<5>[  620.093799] UBI: MTD device size:            15 MiB
<5>[  620.098707] UBI: number of good PEBs:        120
<5>[  620.103336] UBI: number of bad PEBs:         0
<5>[  620.107810] UBI: number of corrupted PEBs:   0
<5>[  620.112269] UBI: max. allowed volumes:       128
<5>[  620.116904] UBI: wear-leveling threshold:    4096
<5>[  620.121647] UBI: number of internal volumes: 1
<5>[  620.126110] UBI: number of user volumes:     1
<5>[  620.130606] UBI: available PEBs:             0
<5>[  620.135070] UBI: total number of reserved PEBs: 120
<5>[  620.139995] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  620.146026] UBI: max/mean erase counter: 4/3
<5>[  620.150344] UBI: image sequence number:  1872325126
<5>[  620.155273] UBI: background thread "ubi_bgt2d" started, PID 16181
<5>[  620.312603] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  620.318693] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  620.326356] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  620.333709] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  620.339569] UBIFS: default compressor: lzo
<5>[  620.343685] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  620.555959] UBIFS: un-mount UBI device 2, volume 0
<5>[  620.606279] UBI: mtd6 is detached from ubi2
<6>[  982.186530] PHY: comcerto-0:06 - Link is Down
<6>[  983.186055] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[ 3893.884570] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[ 3894.036366] eth0: pfe_eth_close
<6>[ 3894.071454] hif_lib_client_unregister : client: 9f0c03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[ 3894.080880] hif_process_client_req: unregister client_id 1
<6>[ 3894.086402] pfe_hif_client_unregister
<6>[ 3894.165744] eth1: pfe_eth_close
<6>[ 3894.201422] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[ 3894.210845] hif_process_client_req: unregister client_id 0
<6>[ 3894.216358] pfe_hif_client_unregister
<5>[ 3910.294210] UBI: attaching mtd6 to ubi2
<5>[ 3910.298064] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 3910.304396] UBI: logical eraseblock size:    126976 bytes
<5>[ 3910.309811] UBI: smallest flash I/O unit:    2048
<5>[ 3910.314547] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 3910.320569] UBI: data offset:                4096
<5>[ 3910.434408] UBI: max. sequence number:       284
<5>[ 3910.451071] UBI: attached mtd6 to ubi2
<5>[ 3910.454891] UBI: MTD device name:            "config"
<5>[ 3910.459963] UBI: MTD device size:            15 MiB
<5>[ 3910.464898] UBI: number of good PEBs:        120
<5>[ 3910.469532] UBI: number of bad PEBs:         0
<5>[ 3910.474015] UBI: number of corrupted PEBs:   0
<5>[ 3910.478471] UBI: max. allowed volumes:       128
<5>[ 3910.483110] UBI: wear-leveling threshold:    4096
<5>[ 3910.487826] UBI: number of internal volumes: 1
<5>[ 3910.492295] UBI: number of user volumes:     1
<5>[ 3910.496749] UBI: available PEBs:             0
<5>[ 3910.501203] UBI: total number of reserved PEBs: 120
<5>[ 3910.506114] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 3910.512152] UBI: max/mean erase counter: 4/3
<5>[ 3910.516435] UBI: image sequence number:  1872325126
<5>[ 3910.521465] UBI: background thread "ubi_bgt2d" started, PID 2588
<5>[ 3910.657624] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 3910.663683] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 3910.671276] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 3910.678618] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 3910.684477] UBIFS: default compressor: lzo
<5>[ 3910.688585] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 3911.158713] UBIFS: un-mount UBI device 2, volume 0
<5>[ 3911.200841] UBI: mtd6 is detached from ubi2
[Diagnostic] Wed Feb 12 22:07:49 CET 2020, 504.66
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000179] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060212] Mount-cache hash table entries: 512
<6>[    0.060710] Initializing cgroup subsys cpuacct
<6>[    0.060739] Initializing cgroup subsys devices
<6>[    0.060773] CPU: Testing write buffer coherency: ok
<6>[    0.060933] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060956] Calibrating local timer... 299.88MHz.
<4>[    0.120065]  Creating cpu1_hotplug_thread....
<4>[    0.120154]  cpu1_hotplug_thread Created
<6>[    0.120170] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121573] CPU1: Booted secondary processor
<6>[    0.180043] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180097] Brought up 2 CPUs
<6>[    0.180109] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180834] devtmpfs: initialized
<6>[    0.182233] xor: measuring software checksum speed
<6>[    0.229994]    arm4regs  :  2128.800 MB/sec
<6>[    0.279971]    8regs     :  1438.000 MB/sec
<6>[    0.329952]    32regs    :  1410.000 MB/sec
<6>[    0.329958] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330162] NET: Registered protocol family 16
<6>[    0.330649] L310 cache controller enabled
<6>[    0.330661] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330740] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330745] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330759] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330767] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331274] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331282] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331298] Power Management Mode Support For C2000: 
<6>[    0.331610] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.344997] PCIe0: Link Up Success 
<6>[    0.345003] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.345009] comcerto_pcie_rc_int_init
<6>[    0.345051] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338355] PCIe1: Link Up Failed 
<7>[    4.338493] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338554] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338569] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338689] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338786] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338797] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338810] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350151] bio: create slab <bio-0> at 0
<4>[    4.519899] raid6: int32x1     25 MB/s
<4>[    4.688276] raid6: int32x2     48 MB/s
<4>[    4.858772] raid6: int32x4     82 MB/s
<4>[    5.028608] raid6: int32x8    113 MB/s
<4>[    5.028614] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028802] vgaarb: loaded
<5>[    5.029103] SCSI subsystem initialized
<7>[    5.029237] libata version 3.00 loaded.
<6>[    5.029395] usbcore: registered new interface driver usbfs
<6>[    5.029473] usbcore: registered new interface driver hub
<6>[    5.029555] usbcore: registered new device driver usb
<6>[    5.029777] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030185] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030571] Switching to clocksource timer2
<5>[    5.030801] FS-Cache: Loaded
<6>[    5.030927] CacheFiles: Loaded
<6>[    5.031810] NET: Registered protocol family 2
<6>[    5.032006] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032655] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032836] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032994] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.033000] TCP reno registered
<6>[    5.033009] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033039] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033285] NET: Registered protocol family 1
<6>[    5.033571] RPC: Registered named UNIX socket transport module.
<6>[    5.033579] RPC: Registered udp transport module.
<6>[    5.033585] RPC: Registered tcp transport module.
<6>[    5.033590] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033613] PCI: CLS 32 bytes, default 32
<6>[    6.072136] membuf_init: created membuf device(253, 0)
<6>[    6.072427] audit: initializing netlink socket (disabled)
<5>[    6.072452] type=2000 audit(6.070:1): initialized
<5>[    6.073397] VFS: Disk quotas dquot_6.5.2
<4>[    6.073537] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074108] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074355] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075020] fuse init (API version 7.17)
<6>[    6.075208] msgmni has been set to 932
<6>[    6.076894] async_tx: api initialized (async)
<6>[    6.077011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077021] io scheduler noop registered
<6>[    6.077026] io scheduler deadline registered
<6>[    6.077086] io scheduler cfq registered (default)
<6>[    6.077391] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.445262] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.095842] console [ttyS0] enabled
<6>[    7.205216] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.301969] brd: module loaded
<6>[    7.391398] loop: module loaded
<6>[    7.395924] nbd: registered device at major 43
<6>[    7.405671] SCSI Media Changer driver v0.25 
<7>[    7.410059] ahci 0000:00:00.0: version 3.0
<4>[    7.410078] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.415837] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.422866] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.428401] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.436528] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.445578] scsi0 : ahci
<6>[    7.448481] scsi1 : ahci
<6>[    7.451204] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.458537] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.466003] SATA Serdes: 48Mhz ref clk
<6>[    7.470252] Serdes2: Lane OK Passed
<4>[    7.473769] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.478457] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.486232] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.494823] scsi2 : ahci_platform
<6>[    7.498357] scsi3 : ahci_platform
<6>[    7.501844] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.509785] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.518637] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.528011] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.535902] Fixed MDIO Bus: probed
<6>[    7.539365] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.743556] Core Release: 2.81a
<4>[    7.746708] Setting default values for core params
<6>[    7.860613] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.866069] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.951295] Using Buffer DMA mode
<4>[    7.954620] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.960467] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.966061] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.970460] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.975262] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.975276] drivers/usb/core/inode.c: creating file '001'
<6>[    7.975289] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.982385] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.987774] Init: Port Power? op_state=1
<4>[    7.991714] Init: Power Port (0)
<7>[    7.994980] usb usb1: default language 0x0409
<7>[    7.994998] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.995005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    8.001824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    8.009066] usb usb1: Product: DWC OTG Controller
<6>[    8.010646] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.019996] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    8.025341] usb usb1: SerialNumber: dwc_otg.0
<6>[    8.029728] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.036552] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    8.044136] usb usb1: usb_probe_device
<7>[    8.044146] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.044170] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.044257] hub 1-0:1.0: usb_probe_interface
<7>[    8.044264] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.044270] hub 1-0:1.0: USB hub found
<6>[    8.044490] ata1.00: configured for UDMA/133
<6>[    8.052335] hub 1-0:1.0: 1 port detected
<7>[    8.056269] hub 1-0:1.0: standalone hub
<7>[    8.056274] hub 1-0:1.0: ganged power switching
<7>[    8.056280] hub 1-0:1.0: individual port over-current protection
<7>[    8.056286] hub 1-0:1.0: Single TT
<7>[    8.056292] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.056299] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.056312] hub 1-0:1.0: local power source is good
<7>[    8.056318] hub 1-0:1.0: enabling power on all ports
<7>[    8.056705] drivers/usb/core/inode.c: creating file '001'
<5>[    8.056806] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<7>[    8.056833] Module dwc_common_port init
<6>[    8.064947] ata1.00: set queue depth = 31
<4>[    8.069131] Check proc_name[ahci].
<5>[    8.072843] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.072889] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    8.073129] mousedev: PS/2 mouse device common for all mice
<6>[    8.073341] i2c /dev entries driver
<4>[    8.073438] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.073776] comcerto_wdt: support registered
<6>[    8.073810] md: linear personality registered for level -1
<6>[    8.073815] md: raid0 personality registered for level 0
<6>[    8.073820] md: raid1 personality registered for level 1
<6>[    8.073825] md: raid10 personality registered for level 10
<6>[    8.073831] md: raid6 personality registered for level 6
<6>[    8.073835] md: raid5 personality registered for level 5
<6>[    8.073840] md: raid4 personality registered for level 4
<6>[    8.073845] md: multipath personality registered for level -4
<5>[    8.150229] sd 0:0:0:0: [sda] 4096-byte physical blocks
<4>[    8.155603] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.155607] 
<6>[    8.155717] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.172534] dm_crypt using the OCF for crypto acceleration.
<7>[    8.172573] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<5>[    8.172790] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.172799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.172865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.192328] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.197833] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.204456] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.211138] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.221909] ALSA device list:
<6>[    8.224888]   No soundcards found.
<6>[    8.228926] TCP cubic registered
<6>[    8.232181] NET: Registered protocol family 17
<6>[    8.236667] NET: Registered protocol family 15
<6>[    8.241129] Initializing NETLINK_KEY socket
<6>[    8.245335] NET: Registered protocol family 5
<6>[    8.249793] lib80211: common routines for IEEE802.11 drivers
<6>[    8.250557]  sda: sda1 sda2 sda3 sda4 sda5
<7>[    8.259589] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.259596] Registering the dns_resolver key type
<5>[    8.260278] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.268978] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.276685] Clocks: disabled unused pll2
<6>[    8.280622] Clocks: disabled unused uart
<6>[    8.284554] Clocks: disabled unused gemtx
<6>[    8.288573] Clocks: disabled unused ipsec_spacc
<6>[    8.293133] Clocks: disabled unused dpi_cie
<7>[    8.293143] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.293158] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.293161] 
<7>[    8.293170] hub 1-0:1.0: over-current change on port 1
<6>[    8.305808] Clocks: disabled unused dpi_decomp
<6>[    8.310264] Clocks: disabled unused ntgref
<6>[    8.314376] Clocks: disabled unused pcie1
<6>[    8.318395] Clocks: disabled unused usb1
<6>[    8.322331] Clocks: disabled unused ext_phy0
<6>[    8.326611] Clocks: disabled unused ext_phy1
<6>[    8.330894] Clocks: disabled unused ext_phy2
<6>[    8.335173] Clocks: disabled unused tpi
<6>[    8.339017] Clocks: disabled unused csys
<6>[    8.342956] Clocks: disabled unused tsuntg
<6>[    8.347062] Clocks: disabled unused sata_occ
<6>[    8.351347] Clocks: disabled unused pcie_occ
<6>[    8.355627] Clocks: disabled unused sgmii_occ
<7>[    8.400624] hub 1-0:1.0: enabling power on all ports
<4>[    8.552983] Registering CPUFreq(comcerto)
<4>[    8.557286] Please be patient, while OpenWrt loads ...
<6>[    8.700631] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.707462] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.714283] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.722187] ata2.00: configured for UDMA/133
<5>[    8.726847] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.734985] ata2.00: set queue depth = 31
<4>[    8.739211] Check proc_name[ahci].
<5>[    8.742848] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.750720] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.756070] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.756204] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.756213] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.756277] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.791940]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.797342] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.819512] Freeing init memory: 13476K
<6>[    9.330586] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.337336] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.597706] RTC_TIME:Wed Feb 12 21:59:34 2020  0.000000 seconds
<6>[    9.620684] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.625334] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.631302] Creating 2 MTD partitions on "spi0.0":
<5>[    9.636109] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.641888] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.652198] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.659283] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.664475] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.673116] Using default values for hw ecc
<4>[    9.680737] Bad block table not found for chip 0
<4>[    9.688737] Bad block table not found for chip 0
<6>[    9.693371] Scanning device for bad blocks
<4>[    9.698511] Bad eraseblock 18 at 0x000000240000
<4>[    9.705990] Bad eraseblock 72 at 0x000000900000
<4>[    9.725627] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.731939] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.762735] Bad eraseblock 863 at 0x000006be0000
<4>[    9.788319] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.808038] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.955552] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.965060] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.971376] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.977834] Creating 5 MTD partitions on "comcertonand":
<5>[    9.983169] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.989460] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.995850] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[   10.002030] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[   10.008386] 0x00001f000000-0x00001ff00000 : "config"
<6>[   10.021357] usbcore: registered new interface driver usbhid
<6>[   10.026947] usbhid: USB HID core driver
<6>[   10.036436] usbcore: registered new interface driver usblp
<6>[   10.049051] ## xhci_plat_probe
<6>[   10.052159] ### comcerto_start_xhci
<6>[   10.055668] USB3.0 clock selected: internal
<6>[   10.063116] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.068026] drivers/usb/core/inode.c: creating file '002'
<6>[   10.068046] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.075268] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.080639] usb usb2: default language 0x0409
<7>[   10.080657] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.080664] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.087471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.094723] usb usb2: Product: xHCI Host Controller
<6>[   10.099612] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.105029] usb usb2: SerialNumber: xhci-hcd
<7>[   10.109567] usb usb2: usb_probe_device
<7>[   10.109577] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.109588] xHCI xhci_add_endpoint called for root hub
<7>[   10.109595] xHCI xhci_check_bandwidth called for root hub
<7>[   10.109615] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.109704] hub 2-0:1.0: usb_probe_interface
<7>[   10.109712] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.109718] hub 2-0:1.0: USB hub found
<6>[   10.113509] hub 2-0:1.0: 1 port detected
<7>[   10.117442] hub 2-0:1.0: standalone hub
<7>[   10.117448] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.117454] hub 2-0:1.0: individual port over-current protection
<7>[   10.117460] hub 2-0:1.0: Single TT
<7>[   10.117466] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.117473] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.117487] hub 2-0:1.0: local power source is good
<7>[   10.117494] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.117649] drivers/usb/core/inode.c: creating file '001'
<6>[   10.117718] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.122649] drivers/usb/core/inode.c: creating file '003'
<6>[   10.122665] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.129762] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.129774] usb usb3: default language 0x0409
<7>[   10.129791] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.129798] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.136623] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.143878] usb usb3: Product: xHCI Host Controller
<6>[   10.148768] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.154186] usb usb3: SerialNumber: xhci-hcd
<7>[   10.158695] usb usb3: usb_probe_device
<7>[   10.158704] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.158713] xHCI xhci_add_endpoint called for root hub
<7>[   10.158719] xHCI xhci_check_bandwidth called for root hub
<7>[   10.158737] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.158826] hub 3-0:1.0: usb_probe_interface
<7>[   10.158832] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.158838] hub 3-0:1.0: USB hub found
<6>[   10.162620] hub 3-0:1.0: 1 port detected
<7>[   10.166552] hub 3-0:1.0: standalone hub
<7>[   10.166557] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.166563] hub 3-0:1.0: individual port over-current protection
<7>[   10.166571] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.166578] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.166590] hub 3-0:1.0: local power source is good
<7>[   10.166596] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.166739] drivers/usb/core/inode.c: creating file '001'
<6>[   10.174166] Initializing USB Mass Storage driver...
<6>[   10.179166] usbcore: registered new interface driver usb-storage
<6>[   10.185212] USB Mass Storage support registered.
<7>[   10.210657] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.260670] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.310891] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.310934] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.430662] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.453407] usb 2-1: default language 0x0409
<7>[   10.453931] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.453943] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.460706] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.467861] usb 2-1: Product: USB2.0 Hub
<6>[   10.471807] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.476619] usb 2-1: usb_probe_device
<7>[   10.476633] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.481799] usb 2-1: Successful Endpoint Configure command
<7>[   10.482055] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.482193] hub 2-1:1.0: usb_probe_interface
<7>[   10.482203] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.482211] hub 2-1:1.0: USB hub found
<6>[   10.486219] hub 2-1:1.0: 4 ports detected
<7>[   10.490248] hub 2-1:1.0: standalone hub
<7>[   10.490256] hub 2-1:1.0: individual port power switching
<7>[   10.490262] hub 2-1:1.0: individual port over-current protection
<7>[   10.513792] usb 2-1: Successful Endpoint Configure command
<7>[   10.514621] hub 2-1:1.0: TT per port
<7>[   10.514631] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.514640] hub 2-1:1.0: Port indicators are supported
<7>[   10.514647] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.515030] usb 2-1: Successful Endpoint Configure command
<7>[   10.515267] hub 2-1:1.0: local power source is good
<7>[   10.515277] hub 2-1:1.0: enabling power on all ports
<7>[   10.516369] drivers/usb/core/inode.c: creating file '002'
<7>[   10.516472] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.516509] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.572314] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.578700] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.612403] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.620403] flashcache: flashcache-1.0-dummy initialized
<6>[   10.630776] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.652562] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.652741] usb 3-1: default language 0x0409
<7>[   10.653273] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.653282] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.660009] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.667203] usb 3-1: Product: USB3.0 Hub
<6>[   10.671154] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.675961] usb 3-1: usb_probe_device
<7>[   10.675971] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.689754] usb 3-1: Successful Endpoint Configure command
<7>[   10.689945] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.690338] hub 3-1:1.0: usb_probe_interface
<7>[   10.690351] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.690359] hub 3-1:1.0: USB hub found
<6>[   10.694424] hub 3-1:1.0: 4 ports detected
<7>[   10.698448] hub 3-1:1.0: standalone hub
<7>[   10.698453] hub 3-1:1.0: individual port power switching
<7>[   10.698459] hub 3-1:1.0: individual port over-current protection
<7>[   10.698467] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.698474] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.698661] usb 3-1: Successful Endpoint Configure command
<7>[   10.698805] hub 3-1:1.0: local power source is good
<7>[   10.698915] hub 3-1:1.0: enabling power on all ports
<7>[   10.699651] drivers/usb/core/inode.c: creating file '002'
<7>[   10.710652] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.710894] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.789711] UBI: attaching mtd3 to ubi0
<6>[   10.791421] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.800214] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.806504] UBI: logical eraseblock size:    126976 bytes
<5>[   10.811920] UBI: smallest flash I/O unit:    2048
<7>[   10.814913] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.815469] usb 2-1.4: default language 0x0409
<5>[   10.816638] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.822481] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.822487] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.822495] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.822501] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.822507] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.822512] usb 2-1.4: SerialNumber: 3B1524X23300  
<5>[   10.854494] UBI: data offset:                4096
<7>[   10.859583] usb 2-1.4: usb_probe_device
<7>[   10.859594] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.859660] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.897748] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.898448] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.898566] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.898574] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.225576] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.225742] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.241505] drivers/usb/core/inode.c: creating file '003'
<7>[   11.241584] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.335086] UBI: max. sequence number:       2
<5>[   12.351887] UBI: attached mtd3 to ubi0
<5>[   12.355647] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.361349] UBI: MTD device size:            216 MiB
<5>[   12.366326] UBI: number of good PEBs:        1723
<5>[   12.371049] UBI: number of bad PEBs:         5
<5>[   12.375504] UBI: number of corrupted PEBs:   0
<5>[   12.379957] UBI: max. allowed volumes:       128
<5>[   12.384591] UBI: wear-leveling threshold:    4096
<5>[   12.389306] UBI: number of internal volumes: 1
<5>[   12.393764] UBI: number of user volumes:     1
<5>[   12.398218] UBI: available PEBs:             0
<5>[   12.402676] UBI: total number of reserved PEBs: 1723
<5>[   12.407652] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.413765] UBI: max/mean erase counter: 22/14
<5>[   12.418219] UBI: image sequence number:  1535285440
<5>[   12.423128] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.545143] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.551269] UBIFS: mounted read-only
<5>[   12.554855] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.562890] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.570219] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.576071] UBIFS: default compressor: lzo
<5>[   12.580177] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.924019] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.979673] UBI: mtd3 is detached from ubi0
<6>[   33.992700] usbcore: registered new interface driver usbserial
<6>[   33.998553] usbserial: USB Serial Driver core
<6>[   34.008450] USB Serial support registered for pl2303
<6>[   34.013545] usbcore: registered new interface driver pl2303
<6>[   34.019132] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.031005] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.044658] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.051072] Disabling lock debugging due to kernel taint
<5>[   34.077469] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.077475] NTFSJ support included
<5>[   34.077477] exFAT support included
<5>[   34.077479] Hfs+J support included
<5>[   34.077481] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.104709] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.109166] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.380679] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.389972] udev: starting version 140
<6>[   34.396795] pfe_module_init
<6>[   34.399650] pfe_platform_probe
<6>[   34.403793] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.409606] pfe_probe
<6>[   34.411900] PFE Driver version:
<6>[   34.411902] pfe_ctrl_10_00_4
<6>[   34.411904] built with pfe sources version: pfe_10_00_3
<6>[   34.423176] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.432774] pfe_hw_init
<6>[   34.435225] CLASS version: 20
<6>[   34.438198] TMU version: 1011231
<6>[   34.441439] BMU1 version: 21
<6>[   34.444325] BMU2 version: 21
<6>[   34.447211] EMAC1 network cfg: 80000
<6>[   34.450798] EMAC2 network cfg: 80000
<6>[   34.454381] EMAC3 network cfg: 80000
<6>[   34.457964] EGPI1 version: 50
<6>[   34.460941] EGPI2 version: 50
<6>[   34.463915] EGPI3 version: 50
<6>[   34.466888] HGPI version: 50
<6>[   34.469775] GPT version: 0
<6>[   34.472491] HIF version: 10
<6>[   34.475290] HIF NOPCY version: 10
<6>[   34.478612] UTIL version: 20
<6>[   34.481503] bmu_init(1) done
<6>[   34.484390] bmu_init(2) done
<6>[   34.493736] class_init() done
<6>[   34.496714] tmu_init: mem init
<6>[   34.499775] tmu_init: lmem init
<6>[   34.502971] tmu_init() done
<6>[   34.505771] util_init() done
<6>[   34.508659] gpi_init(1) done
<6>[   34.511552] gpi_init(2) done
<6>[   34.514440] gpi_init(3) done
<6>[   34.517328] gpi_init(hif) done
<6>[   34.520388] bmu_enable(1) done
<6>[   34.523453] bmu_enable(2) done
<6>[   34.526515] pfe_hif_lib_init
<6>[   34.529573] pfe_hif_init
<6>[   34.532119] pfe_hif_alloc_descr
<6>[   34.535366] pfe_hif_init_buffers
<6>[   34.538723] pfe_firmware_init
<6>[   34.701208] pfe_load_elf
<3>[   34.703764] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.735226] PFE binary version: pfe_10_00_3
<6>[   34.739427] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.745899] pfe_load_elf
<6>[   34.749815] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.755147] pfe_load_elf
<6>[   34.759472] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.765024] pfe_ctrl_init
<6>[   34.785772] pfe_ctrl_init finished
<6>[   34.785778] pfe_ctrl_timer
<6>[   34.791910] pfe_eth_init
<6>[   34.803189] Comcerto MDIO Bus: probed
<6>[   34.808173] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.816780] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.823653] pfe_vwd_init
<6>[   34.826294] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.831293] pfe_vwd_driver_init: start
<4>[   34.835057] pfe_vwd_up: start
<6>[   34.838092] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.845175] pfe_vwd_driver_init: end
<6>[   34.848761] pfe_pcap_init
<6>[   34.891333] eth0: pfe_eth_open
<6>[   34.894550] hif_process_client_req: register client_id 0
<6>[   34.899883] pfe_hif_client_register
<6>[   34.903419] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.911744] eth0: pfe_gemac_init
<6>[   34.944227] eth0: pfe_eth_close
<6>[   34.980613] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.990035] hif_process_client_req: unregister client_id 0
<6>[   34.995541] pfe_hif_client_unregister
<6>[   34.999653] eth1: pfe_eth_open
<6>[   35.002854] hif_process_client_req: register client_id 1
<6>[   35.008180] pfe_hif_client_register
<6>[   35.011698] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   35.019988] eth1: pfe_gemac_init
<6>[   35.024048] eth1: pfe_eth_close
<6>[   35.060608] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.070029] hif_process_client_req: unregister client_id 1
<6>[   35.075533] pfe_hif_client_unregister
<6>[   35.525410] kjournald starting.  Commit interval 5 seconds
<6>[   35.525683] EXT3-fs (sda1): using internal journal
<6>[   35.525694] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.917841] kjournald starting.  Commit interval 5 seconds
<6>[   35.923393] EXT3-fs (sda1): using internal journal
<6>[   35.928204] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.357188] kjournald starting.  Commit interval 5 seconds
<6>[   36.362739] EXT3-fs (sdb1): using internal journal
<6>[   36.367550] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.720544] md: md9 stopped.
<6>[   36.726262] md: bind<sdb1>
<6>[   36.729333] md: bind<sda1>
<6>[   36.735094] bio: create slab <bio-1> at 1
<6>[   36.739304] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.744910] created bitmap (1 pages) for device md9
<6>[   36.749969] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.788491] md9: detected capacity change from 0 to 542769152
<6>[   37.848314]  md9: unknown partition table
<6>[   38.107210] kjournald starting.  Commit interval 5 seconds
<6>[   38.118393] EXT3-fs (md9): using internal journal
<6>[   38.123145] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.406689] md: md13 stopped.
<6>[   38.415147] md: bind<sdb4>
<6>[   38.418158] md: bind<sda4>
<6>[   38.424020] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.429679] created bitmap (1 pages) for device md13
<6>[   38.434853] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.483966] md13: detected capacity change from 0 to 469893120
<4>[   56.181896] set stripe cache size 1024
<4>[   56.186186] STRIPE_CACHE_SIZE is 1024
<6>[   57.126555] md: bind<sda2>
<6>[   57.136972] md: bind<sdb2>
<6>[   57.142847] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   57.148542] created bitmap (1 pages) for device md256
<6>[   57.153839] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   57.182415] md256: detected capacity change from 0 to 542834688
<6>[   57.258980]  md256: unknown partition table
<6>[   57.325732] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   57.690807] md: bind<sda5>
<6>[   57.693749] md: bind<sdb5>
<6>[   57.699581] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   57.705289] created bitmap (1 pages) for device md322
<6>[   57.710637] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   57.738580] md322: detected capacity change from 0 to 7408779264
<6>[   57.800873]  md322: unknown partition table
<6>[   57.872103] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   58.426591]  md13: unknown partition table
<6>[   58.818998] md: md1 stopped.
<6>[   58.834119] md: bind<sdb3>
<6>[   58.837108] md: bind<sda3>
<6>[   58.842989] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   58.848394] md1: detected capacity change from 0 to 5990981238784
<6>[   58.919205]  md1: unknown partition table
<6>[   69.497535] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[   76.416664] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   80.289773] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   81.340261] [S30mountall] start
<5>[   81.774504] UBI: attaching mtd3 to ubi0
<5>[   81.778356] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   81.784678] UBI: logical eraseblock size:    126976 bytes
<5>[   81.790091] UBI: smallest flash I/O unit:    2048
<5>[   81.794824] UBI: VID header offset:          2048 (aligned 2048)
<5>[   81.800851] UBI: data offset:                4096
<5>[   83.283492] UBI: max. sequence number:       2
<5>[   83.300334] UBI: attached mtd3 to ubi0
<5>[   83.304120] UBI: MTD device name:            "boot1_rootfs2"
<5>[   83.309795] UBI: MTD device size:            216 MiB
<5>[   83.314780] UBI: number of good PEBs:        1723
<5>[   83.319495] UBI: number of bad PEBs:         5
<5>[   83.323953] UBI: number of corrupted PEBs:   0
<5>[   83.328408] UBI: max. allowed volumes:       128
<5>[   83.333039] UBI: wear-leveling threshold:    4096
<5>[   83.337754] UBI: number of internal volumes: 1
<5>[   83.342212] UBI: number of user volumes:     1
<5>[   83.346666] UBI: available PEBs:             0
<5>[   83.351124] UBI: total number of reserved PEBs: 1723
<5>[   83.356100] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   83.362214] UBI: max/mean erase counter: 22/14
<5>[   83.366669] UBI: image sequence number:  1535285440
<5>[   83.371577] UBI: background thread "ubi_bgt0d" started, PID 1600
<5>[   83.505873] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   83.512001] UBIFS: mounted read-only
<5>[   83.515588] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   83.523621] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   83.530957] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   83.536805] UBIFS: default compressor: lzo
<5>[   83.540920] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  104.057048] UBIFS: un-mount UBI device 0, volume 0
<5>[  104.116737] UBI: mtd3 is detached from ubi0
<5>[  104.535942] UBI: attaching mtd3 to ubi0
<5>[  104.539794] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  104.546121] UBI: logical eraseblock size:    126976 bytes
<5>[  104.551549] UBI: smallest flash I/O unit:    2048
<5>[  104.556266] UBI: VID header offset:          2048 (aligned 2048)
<5>[  104.562293] UBI: data offset:                4096
<5>[  106.054381] UBI: max. sequence number:       2
<5>[  106.071226] UBI: attached mtd3 to ubi0
<5>[  106.074992] UBI: MTD device name:            "boot1_rootfs2"
<5>[  106.080680] UBI: MTD device size:            216 MiB
<5>[  106.085657] UBI: number of good PEBs:        1723
<5>[  106.090372] UBI: number of bad PEBs:         5
<5>[  106.094831] UBI: number of corrupted PEBs:   0
<5>[  106.099284] UBI: max. allowed volumes:       128
<5>[  106.103916] UBI: wear-leveling threshold:    4096
<5>[  106.108631] UBI: number of internal volumes: 1
<5>[  106.113088] UBI: number of user volumes:     1
<5>[  106.117542] UBI: available PEBs:             0
<5>[  106.122005] UBI: total number of reserved PEBs: 1723
<5>[  106.126982] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  106.133112] UBI: max/mean erase counter: 22/14
<5>[  106.137570] UBI: image sequence number:  1535285440
<5>[  106.142480] UBI: background thread "ubi_bgt0d" started, PID 1727
<5>[  106.264671] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  106.270797] UBIFS: mounted read-only
<5>[  106.274383] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  106.282419] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  106.289749] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  106.295604] UBIFS: default compressor: lzo
<5>[  106.299711] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  106.360369] UBIFS: un-mount UBI device 0, volume 0
<5>[  106.420385] UBI: mtd3 is detached from ubi0
<6>[  106.569537] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  126.906903] UBI: attaching mtd6 to ubi2
<5>[  126.910795] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  126.917085] UBI: logical eraseblock size:    126976 bytes
<5>[  126.922520] UBI: smallest flash I/O unit:    2048
<5>[  126.927244] UBI: VID header offset:          2048 (aligned 2048)
<5>[  126.933284] UBI: data offset:                4096
<5>[  127.058344] UBI: max. sequence number:       288
<5>[  127.073700] UBI: attached mtd6 to ubi2
<5>[  127.077463] UBI: MTD device name:            "config"
<5>[  127.082560] UBI: MTD device size:            15 MiB
<5>[  127.087456] UBI: number of good PEBs:        120
<5>[  127.092097] UBI: number of bad PEBs:         0
<5>[  127.096553] UBI: number of corrupted PEBs:   0
<5>[  127.101012] UBI: max. allowed volumes:       128
<5>[  127.105644] UBI: wear-leveling threshold:    4096
<5>[  127.110362] UBI: number of internal volumes: 1
<5>[  127.114827] UBI: number of user volumes:     1
<5>[  127.119283] UBI: available PEBs:             0
<5>[  127.123748] UBI: total number of reserved PEBs: 120
<5>[  127.128638] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  127.134665] UBI: max/mean erase counter: 4/3
<5>[  127.138945] UBI: image sequence number:  1872325126
<5>[  127.143935] UBI: background thread "ubi_bgt2d" started, PID 2182
<5>[  127.471113] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  127.477148] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  127.484766] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  127.492123] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  127.497979] UBIFS: default compressor: lzo
<5>[  127.502094] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  127.996754] UBIFS: un-mount UBI device 2, volume 0
<5>[  128.078492] UBI: mtd6 is detached from ubi2
<4>[  128.701090] [S30mountall] end
<4>[  128.704865] [S31init_hardware] start
<6>[  128.945041] sysinfo: Module loaded.
<6>[  129.458743] fnotify: Load file notify kernel module.
<6>[  130.797517] usbcore: registered new interface driver snd-usb-audio
<6>[  130.810026] usbcore: registered new interface driver snd-usb-caiaq
<6>[  130.838429] Linux video capture interface: v2.00
<6>[  130.870235] usbcore: registered new interface driver uvcvideo
<6>[  130.876042] USB Video Class driver (1.1.1)
<6>[  131.071890] NET: Registered protocol family 10
<4>[  134.031955] [S31init_hardware] end
<4>[  134.035932] [S32init_mac_addr] start
<6>[  135.677389] eth0: pfe_eth_open
<6>[  135.680644] hif_process_client_req: register client_id 1
<6>[  135.685981] pfe_hif_client_register
<6>[  135.689506] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  135.697814] eth0: pfe_gemac_init
<6>[  135.701678] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  138.306214] eth1: pfe_eth_open
<6>[  138.309416] hif_process_client_req: register client_id 0
<6>[  138.314755] pfe_hif_client_register
<6>[  138.318267] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  138.326564] eth1: pfe_gemac_init
<6>[  138.330364] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[  138.700815] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  138.706414] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  140.071257] [S32init_mac_addr] end
<4>[  140.075229] [S33sysinit] start
<7>[  149.890606] eth0: no IPv6 routers present
<5>[  161.371583] UBI: attaching mtd6 to ubi2
<5>[  161.375436] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  161.381737] UBI: logical eraseblock size:    126976 bytes
<5>[  161.387151] UBI: smallest flash I/O unit:    2048
<5>[  161.391875] UBI: VID header offset:          2048 (aligned 2048)
<5>[  161.397896] UBI: data offset:                4096
<5>[  161.505817] UBI: max. sequence number:       289
<5>[  161.521136] UBI: attached mtd6 to ubi2
<5>[  161.524902] UBI: MTD device name:            "config"
<5>[  161.529982] UBI: MTD device size:            15 MiB
<5>[  161.534900] UBI: number of good PEBs:        120
<5>[  161.539529] UBI: number of bad PEBs:         0
<5>[  161.543992] UBI: number of corrupted PEBs:   0
<5>[  161.548447] UBI: max. allowed volumes:       128
<5>[  161.553081] UBI: wear-leveling threshold:    4096
<5>[  161.557796] UBI: number of internal volumes: 1
<5>[  161.562256] UBI: number of user volumes:     1
<5>[  161.566710] UBI: available PEBs:             0
<5>[  161.571171] UBI: total number of reserved PEBs: 120
<5>[  161.576061] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  161.582092] UBI: max/mean erase counter: 4/3
<5>[  161.586372] UBI: image sequence number:  1872325126
<5>[  161.591283] UBI: background thread "ubi_bgt2d" started, PID 2847
<5>[  161.720394] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  161.726439] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  161.734037] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  161.741373] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  161.747221] UBIFS: default compressor: lzo
<5>[  161.751334] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  161.771745] UBIFS: un-mount UBI device 2, volume 0
<4>[  248.013068] [S33sysinit] end
<4>[  248.016549] [S34shutdown_check] start
<4>[  248.303701] [S34shutdown_check] end
<4>[  248.307755] [S35init_disk] start
<5>[  248.620686] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  248.626715] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  248.634318] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  248.641656] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  248.647505] UBIFS: default compressor: lzo
<5>[  248.651617] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  248.735086] UBIFS: un-mount UBI device 2, volume 0
<5>[  248.806600] UBI: mtd6 is detached from ubi2
<4>[  250.330323] [S35init_disk] end
<4>[  250.334142] [S40init_network] start
<4>[  250.347629] [S40init_network] end
<4>[  250.351678] [S42hostname] start
<4>[  250.829604] [S42hostname] end
<4>[  250.833289] [S45network] start
<5>[  260.863852] Bridge firewalling registered
<6>[  261.409966] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  261.417187] bonding: MII link monitoring set to 100 ms
<6>[  269.150513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  278.301827] [S45network] end
<4>[  278.305284] [S46iSCSItrgt] start
<4>[  283.685061] [S46iSCSItrgt] end
<4>[  283.688673] [S46iscsiinit] start
<6>[  283.714661] Loading iSCSI transport class v2.0-870.
<5>[  283.744479] iscsi: registered transport (tcp)
<4>[  285.203355] [S46iscsiinit] end
<4>[  285.206955] [S55urandom] start
<4>[  285.238789] [S55urandom] end
<4>[  285.242692] [S56mariadb] start
<4>[  291.709204] [S56mariadb] end
<4>[  291.712687] [S56start_service] start
<4>[  291.792648] [S56start_service] end
<4>[  291.796619] [S57init_qpkg] start
<6>[  354.700842] PHY: comcerto-0:06 - Link is Down
<6>[  355.700879] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[  421.434550] [S57init_qpkg] end
<4>[  421.438191] [S57ldap] start
<4>[  421.477131] [S57ldap] end
<4>[  421.480300] [S58dbus] start
<4>[  423.749917] [S58dbus] end
<4>[  423.753155] [S58nsswitch] start
<4>[  423.945130] [S58nsswitch] end
<4>[  423.948658] [S58printer] start
<4>[  424.006052] [S58printer] end
<4>[  429.013797] [S59Qthttpd] start
<4>[  444.762687] [S59Qthttpd] end
<4>[  444.767608] [S62cupsd] start
<4>[  446.034101] [S62cupsd] end
<4>[  446.037341] [S62ntpd] start
<4>[  446.123099] [S62ntpd] end
<4>[  446.126246] [S62smb] start
<4>[  446.795599] ==== memory usage ====
<4>[  446.822422] MemTotal:         490756 kB
<4>[  446.826349] MemFree:           65096 kB
<4>[  446.830218] Buffers:           18400 kB
<4>[  446.834215] Cached:           283908 kB
<4>[  446.838089] SwapCached:          148 kB
<4>[  446.841993] Active:           119952 kB
<4>[  446.845904] Inactive:         253472 kB
<4>[  446.849786] Active(anon):      57056 kB
<4>[  446.853679] Inactive(anon):    70012 kB
<4>[  446.857544] Active(file):      62896 kB
<4>[  446.861418] Inactive(file):   183460 kB
<4>[  446.865289] Unevictable:        2012 kB
<4>[  446.869179] Mlocked:            2012 kB
<4>[  446.873081] SwapTotal:      24542452 kB
<4>[  446.876951] SwapFree:       24542188 kB
<4>[  446.880825] Dirty:               232 kB
<4>[  446.884712] Writeback:             0 kB
<4>[  446.888576] AnonPages:         72592 kB
<4>[  446.892478] Mapped:            18524 kB
<4>[  446.896371] Shmem:             55812 kB
<4>[  446.900247] Slab:              34196 kB
<4>[  446.904129] SReclaimable:      22296 kB
<4>[  446.907985] SUnreclaim:        11900 kB
<4>[  446.911858] KernelStack:        1856 kB
<4>[  446.915727] PageTables:         1608 kB
<4>[  446.919617] NFS_Unstable:          0 kB
<4>[  446.923532] Bounce:                0 kB
<4>[  446.927405] WritebackTmp:          0 kB
<4>[  446.931289] CommitLimit:    24787828 kB
<4>[  446.935152] Committed_AS:    1217292 kB
<4>[  446.939014] VmallocTotal:    1302528 kB
<4>[  446.942902] VmallocUsed:       61368 kB
<4>[  446.946802] VmallocChunk:    1212348 kB
<4>[  446.973230] Node 0, zone      DMA
<4>[  446.976618]   pages free     10990
<4>[  446.980081]         min      366
<4>[  446.995276]         low      457
<4>[  446.998542]         high     549
<4>[  447.002043]         scanned  0
<4>[  447.005160]         spanned  11264
<4>[  447.008612]         present  11154
<4>[  447.012074]     nr_free_pages 10990
<4>[  447.015590]     nr_inactive_anon 0
<4>[  447.019093]     nr_active_anon 0
<4>[  447.022405]     nr_inactive_file 0
<4>[  447.025840]     nr_active_file 0
<4>[  447.029122]     nr_unevictable 0
<4>[  447.032473]     nr_mlock     0
<4>[  447.035567]     nr_anon_pages 0
<4>[  447.038735]     nr_mapped    0
<4>[  447.041834]     nr_file_pages 0
<4>[  447.045001]     nr_dirty     0
<4>[  447.048078]     nr_writeback 0
<4>[  447.051175]     nr_slab_reclaimable 0
<4>[  447.054939]     nr_slab_unreclaimable 0
<4>[  447.058839]     nr_page_table_pages 0
<4>[  447.062555]     nr_kernel_stack 0
<4>[  447.065897]     nr_unstable  0
<4>[  447.068973]     nr_bounce    0
<4>[  447.072065]     nr_vmscan_write 0
<4>[  447.075405]     nr_vmscan_immediate_reclaim 0
<4>[  447.079856]     nr_writeback_temp 0
<4>[  447.083425]     nr_isolated_anon 0
<4>[  447.086871]     nr_isolated_file 0
<4>[  447.090374]     nr_shmem     0
<4>[  447.093472]     nr_dirtied   0
<4>[  447.096553]     nr_written   0
<4>[  447.099631]     nr_anon_transparent_hugepages 0
<4>[  447.115444]         protection: (0, 443, 443)
<4>[  447.119869]   pagesets
<4>[  447.122292]     cpu: 0
<4>[  447.124694]               count: 2
<4>[  447.128138]               high:  6
<4>[  447.131588]               batch: 1
<4>[  447.135038]   vm stats threshold: 4
<4>[  447.138563]     cpu: 1
<4>[  447.140970]               count: 5
<4>[  447.144423]               high:  6
<4>[  447.147881]               batch: 1
<4>[  447.151352]   vm stats threshold: 4
<4>[  447.154872]   all_unreclaimable: 0
<4>[  447.158301]   start_pfn:         0
<4>[  447.161741]   inactive_ratio:    1
<4>[  447.165166] Node 0, zone   Normal
<4>[  447.168515]   pages free     5284
<4>[  447.172143]         min      3729
<4>[  447.175507]         low      4661
<4>[  447.178855]         high     5593
<4>[  447.182230]         scanned  0
<4>[  447.185312]         spanned  119808
<4>[  447.188825]         present  113518
<4>[  447.192360]     nr_free_pages 5284
<4>[  447.195917]     nr_inactive_anon 17503
<4>[  447.199715]     nr_active_anon 14251
<4>[  447.203368]     nr_inactive_file 45865
<4>[  447.207145]     nr_active_file 15724
<4>[  447.210980]     nr_unevictable 503
<4>[  447.214410]     nr_mlock     503
<4>[  447.217676]     nr_anon_pages 18224
<4>[  447.221235]     nr_mapped    4631
<4>[  447.224603]     nr_file_pages 75614
<4>[  447.228127]     nr_dirty     58
<4>[  447.231314]     nr_writeback 0
<4>[  447.234395]     nr_slab_reclaimable 5574
<4>[  447.238344]     nr_slab_unreclaimable 2975
<4>[  447.242486]     nr_page_table_pages 402
<4>[  447.246399]     nr_kernel_stack 232
<4>[  447.249936]     nr_unstable  0
<4>[  447.253038]     nr_bounce    0
<4>[  447.256120]     nr_vmscan_write 66
<4>[  447.259548]     nr_vmscan_immediate_reclaim 12
<4>[  447.264037]     nr_writeback_temp 0
<4>[  447.267555]     nr_isolated_anon 0
<4>[  447.271025]     nr_isolated_file 0
<4>[  447.274484]     nr_shmem     13953
<4>[  447.277928]     nr_dirtied   238890
<4>[  447.281463]     nr_written   236793
<4>[  447.284979]     nr_anon_transparent_hugepages 0
<4>[  447.289539]         protection: (0, 0, 0)
<4>[  447.293592]   pagesets
<4>[  447.295982]     cpu: 0
<4>[  447.298395]               count: 80
<4>[  447.301965]               high:  186
<4>[  447.305577]               batch: 31
<4>[  447.309094]   vm stats threshold: 12
<4>[  447.312707]     cpu: 1
<4>[  447.315089]               count: 79
<4>[  447.318601]               high:  186
<4>[  447.322230]               batch: 31
<4>[  447.325771]   vm stats threshold: 12
<4>[  447.329390]   all_unreclaimable: 0
<4>[  447.333070]   start_pfn:         11264
<4>[  447.336851]   inactive_ratio:    1
<4>[  447.370910] Filename				Type		Size	Used	Priority
<4>[  447.375591] /dev/md256                              partition	530108	264	-1
<4>[  447.382686] /dev/md322                              partition	7235132	0	-2
<4>[  447.390447] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  447.411714]               total         used         free       shared      buffers
<4>[  447.411721]   Mem:       490756       425728        65028            0        18400
<4>[  447.411725]  Swap:     24542452          264     24542188
<4>[  447.411728] Total:     25033208       425992     24607216
<4>[  447.454227] ==== end ====
<4>[  470.907995] [S62smb] end
<4>[  470.911208] [S64MediaService] start
<4>[  471.483105] [S64MediaService] end
<4>[  471.487190] [S65thttpd] start
<4>[  479.304239] [S65thttpd] end
<4>[  479.307553] [S66ImRd] start
<4>[  479.311751] [S66ImRd] end
<4>[  479.315129] [S66wfm_thttpd] start
<4>[  482.153896] [S66wfm_thttpd] end
<4>[  482.157577] [S67ftp] start
<4>[  482.319580] [S67ftp] end
<4>[  482.322770] [S70crond] start
<4>[  482.327031] [S70crond] end
<4>[  482.330465] [S72logo] start
<4>[  482.334904] [S72logo] end
<4>[  482.338158] [S73ntpclient] start
<4>[  482.349434] [S73ntpclient] end
<4>[  482.355449] [S75stunnel] start
<4>[  482.359941] [S75stunnel] end
<4>[  482.375803] [S77recycled] start
<4>[  483.388228] [S77recycled] end
<4>[  483.391889] [S78qraid1] start
<4>[  483.396618] [S78qraid1] end
<4>[  483.400100] [S83ups] start
<4>[  483.422553] [S83ups] end
<4>[  483.425726] [S85login] start
<4>[  483.429909] [S85login] end
<4>[  483.476621] [S89bonjour] start
<4>[  483.481732] [S89bonjour] end
<4>[  483.485416] [S89wsd] start
<4>[  483.489485] [S89wsd] end
<4>[  494.345215] [S90twonkymedia] start
<4>[  494.349998] [S90twonkymedia] end
<4>[  494.354032] [S92lunportman] start
<4>[  494.358824] [S92lunportman] end
<4>[  494.364488] [S95snmp] start
<4>[  494.368778] [S95snmp] end
<4>[  494.381269] [S97upnpd] start
<4>[  494.385817] [S97upnpd] end
<4>[  494.392391] [S98init_nas] start
<5>[  500.240976] UBI: attaching mtd6 to ubi2
<5>[  500.244838] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  500.251147] UBI: logical eraseblock size:    126976 bytes
<5>[  500.256565] UBI: smallest flash I/O unit:    2048
<5>[  500.261297] UBI: VID header offset:          2048 (aligned 2048)
<5>[  500.267333] UBI: data offset:                4096
<5>[  500.384688] UBI: max. sequence number:       291
<5>[  500.399938] UBI: attached mtd6 to ubi2
<5>[  500.403731] UBI: MTD device name:            "config"
<5>[  500.408796] UBI: MTD device size:            15 MiB
<5>[  500.413692] UBI: number of good PEBs:        120
<5>[  500.418320] UBI: number of bad PEBs:         0
<5>[  500.422779] UBI: number of corrupted PEBs:   0
<5>[  500.427234] UBI: max. allowed volumes:       128
<5>[  500.431865] UBI: wear-leveling threshold:    4096
<5>[  500.436580] UBI: number of internal volumes: 1
<5>[  500.441038] UBI: number of user volumes:     1
<5>[  500.445492] UBI: available PEBs:             0
<5>[  500.449946] UBI: total number of reserved PEBs: 120
<5>[  500.454847] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  500.460875] UBI: max/mean erase counter: 4/3
<5>[  500.465155] UBI: image sequence number:  1872325126
<5>[  500.470060] UBI: background thread "ubi_bgt2d" started, PID 11876
<5>[  500.599058] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  500.605246] UBIFS: mounted read-only
<5>[  500.608839] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  500.616446] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  500.623838] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  500.629687] UBIFS: default compressor: lzo
<5>[  500.633806] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  500.646635] UBIFS: un-mount UBI device 2, volume 0
<5>[  500.706449] UBI: mtd6 is detached from ubi2
<4>[  503.478444] rule type=1, num=4
<4>[  507.354170] [S98init_nas] end
<4>[  507.357687] [S99atalk] start
<4>[  507.363604] [S99atalk] end
<4>[  507.367139] [S99cloudinstall_report_complete_daemon] start
<4>[  507.402131] [S99cloudinstall_report_complete_daemon] end
<4>[  507.439074] [S99init_iTune] start
<4>[  507.450020] [S99init_iTune] end
<4>[  507.479021] [S99mysqld] start
<4>[  507.489865] [S99mysqld] end
<4>[  507.519284] [S99nfs] start
<4>[  507.538171] [S99nfs] end
<4>[  507.571572] [S99porter] start
<4>[  507.591740] [S99porter] end
<4>[  507.595234] [S99qanalytic] start
<4>[  507.599836] [S99qanalytic] end
<4>[  507.683179] [S99qcloud] start
<4>[  507.687868] [S99qcloud] end
<4>[  507.751435] [S99qsyncman] start
<4>[  507.755906] [S99qsyncman] end
<4>[  507.759520] [S99sdmd.sh] start
<4>[  507.843858] [S99sdmd.sh] end
<4>[  507.847440] [S99sync_action.sh] start
<4>[  507.922219] [S99sync_action.sh] end
<4>[  507.926513] [S99z_antivirus] start
<4>[  508.003977] [S99z_antivirus] end
<6>[  530.325822] Initializing XFRM netlink socket
<6>[  530.431497] PPP generic driver version 2.4.2
<6>[  530.446782] NET: Registered protocol family 24
<6>[  530.475015] PPP BSD Compression module registered
<6>[  530.489632] PPP MPPE Compression module registered
<6>[  530.513476] PPP Deflate Compression module registered
<6>[  530.530336] L2TP core driver, V2.0
<6>[  530.542693] L2TP IP encapsulation support (L2TPv3)
<6>[  530.556270] L2TP debugfs support
<6>[  530.570062] L2TP netlink interface
<6>[  530.584811] L2TP ethernet pseudowire support (L2TPv3)
<6>[  530.600072] PPPoL2TP kernel driver, V2.0
<6>[  530.619934] tun: Universal TUN/TAP device driver, 1.6
<6>[  530.625057] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[  530.665572] nf_conntrack version 0.5.0 (7668 buckets, 30672 max)
<6>[  530.703148] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[  546.737320] Initializing XFRM netlink socket
<4>[  652.739352] ====== 2020-02-12 22:10:19 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  668.705630] UBI: attaching mtd6 to ubi2
<5>[  668.709935] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  668.716368] UBI: logical eraseblock size:    126976 bytes
<5>[  668.721830] UBI: smallest flash I/O unit:    2048
<5>[  668.726559] UBI: VID header offset:          2048 (aligned 2048)
<5>[  668.732737] UBI: data offset:                4096
<5>[  668.845315] UBI: max. sequence number:       291
<5>[  668.862723] UBI: attached mtd6 to ubi2
<5>[  668.866488] UBI: MTD device name:            "config"
<5>[  668.871619] UBI: MTD device size:            15 MiB
<5>[  668.876527] UBI: number of good PEBs:        120
<5>[  668.881185] UBI: number of bad PEBs:         0
<5>[  668.885640] UBI: number of corrupted PEBs:   0
<5>[  668.890105] UBI: max. allowed volumes:       128
<5>[  668.894740] UBI: wear-leveling threshold:    4096
<5>[  668.899473] UBI: number of internal volumes: 1
<5>[  668.903928] UBI: number of user volumes:     1
<5>[  668.908381] UBI: available PEBs:             0
<5>[  668.912842] UBI: total number of reserved PEBs: 120
<5>[  668.917732] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  668.923762] UBI: max/mean erase counter: 4/3
<5>[  668.928043] UBI: image sequence number:  1872325126
<5>[  668.932973] UBI: background thread "ubi_bgt2d" started, PID 20718
<5>[  669.064383] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  669.070882] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  669.078601] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  669.086135] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  669.092238] UBIFS: default compressor: lzo
<5>[  669.096388] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  669.322360] UBIFS: un-mount UBI device 2, volume 0
<5>[  669.408664] UBI: mtd6 is detached from ubi2
<4>[ 5689.733873] rule type=2, num=0
<4>[ 5757.789841] rule type=2, num=0
<6>[ 8096.862004] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[ 8096.954047] eth0: pfe_eth_close
<6>[ 8096.988716] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[ 8096.998137] hif_process_client_req: unregister client_id 1
<6>[ 8097.003652] pfe_hif_client_unregister
<6>[ 8097.070459] eth1: pfe_eth_close
<6>[ 8097.108722] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[ 8097.118145] hif_process_client_req: unregister client_id 0
<6>[ 8097.123657] pfe_hif_client_unregister
<5>[ 8113.382932] UBI: attaching mtd6 to ubi2
<5>[ 8113.386785] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 8113.393107] UBI: logical eraseblock size:    126976 bytes
<5>[ 8113.398522] UBI: smallest flash I/O unit:    2048
<5>[ 8113.403276] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 8113.409334] UBI: data offset:                4096
<5>[ 8113.517036] UBI: max. sequence number:       292
<5>[ 8113.532362] UBI: attached mtd6 to ubi2
<5>[ 8113.536130] UBI: MTD device name:            "config"
<5>[ 8113.541219] UBI: MTD device size:            15 MiB
<5>[ 8113.546110] UBI: number of good PEBs:        120
<5>[ 8113.550747] UBI: number of bad PEBs:         0
<5>[ 8113.555201] UBI: number of corrupted PEBs:   0
<5>[ 8113.559663] UBI: max. allowed volumes:       128
<5>[ 8113.564291] UBI: wear-leveling threshold:    4096
<5>[ 8113.569013] UBI: number of internal volumes: 1
<5>[ 8113.573467] UBI: number of user volumes:     1
<5>[ 8113.577921] UBI: available PEBs:             0
<5>[ 8113.582380] UBI: total number of reserved PEBs: 120
<5>[ 8113.587269] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 8113.593297] UBI: max/mean erase counter: 4/3
<5>[ 8113.597577] UBI: image sequence number:  1872325126
<5>[ 8113.602497] UBI: background thread "ubi_bgt2d" started, PID 13051
<5>[ 8113.734631] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 8113.740739] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 8113.748378] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 8113.755863] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 8113.762451] UBIFS: default compressor: lzo
<5>[ 8113.766987] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 8114.057909] UBIFS: un-mount UBI device 2, volume 0
<5>[ 8114.124733] UBI: mtd6 is detached from ubi2
[Diagnostic] Thu Feb 13 07:16:30 CET 2020, 499.75
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Thu Dec 12 05:30:28 CST 2019
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000181] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060217] Mount-cache hash table entries: 512
<6>[    0.060717] Initializing cgroup subsys cpuacct
<6>[    0.060746] Initializing cgroup subsys devices
<6>[    0.060780] CPU: Testing write buffer coherency: ok
<6>[    0.060944] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060967] Calibrating local timer... 299.86MHz.
<4>[    0.120064]  Creating cpu1_hotplug_thread....
<4>[    0.120152]  cpu1_hotplug_thread Created
<6>[    0.120169] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121562] CPU1: Booted secondary processor
<6>[    0.180038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180092] Brought up 2 CPUs
<6>[    0.180106] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180788] devtmpfs: initialized
<6>[    0.182194] xor: measuring software checksum speed
<6>[    0.229986]    arm4regs  :  2128.800 MB/sec
<6>[    0.279961]    8regs     :  1438.000 MB/sec
<6>[    0.329935]    32regs    :  1409.600 MB/sec
<6>[    0.329943] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330147] NET: Registered protocol family 16
<6>[    0.330634] L310 cache controller enabled
<6>[    0.330647] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330726] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330730] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330744] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330752] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331261] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331270] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331286] Power Management Mode Support For C2000: 
<6>[    0.331597] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.346203] PCIe0: Link Up Success 
<6>[    0.346209] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.346215] comcerto_pcie_rc_int_init
<6>[    0.346257] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338108] PCIe1: Link Up Failed 
<7>[    4.338247] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338307] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338322] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338442] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338540] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338550] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338563] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349995] bio: create slab <bio-0> at 0
<4>[    4.519749] raid6: int32x1     25 MB/s
<4>[    4.688059] raid6: int32x2     48 MB/s
<4>[    4.858541] raid6: int32x4     82 MB/s
<4>[    5.028232] raid6: int32x8    113 MB/s
<4>[    5.028237] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028424] vgaarb: loaded
<5>[    5.028727] SCSI subsystem initialized
<7>[    5.028857] libata version 3.00 loaded.
<6>[    5.029019] usbcore: registered new interface driver usbfs
<6>[    5.029097] usbcore: registered new interface driver hub
<6>[    5.029185] usbcore: registered new device driver usb
<6>[    5.029411] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029832] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030210] Switching to clocksource timer2
<5>[    5.030447] FS-Cache: Loaded
<6>[    5.030575] CacheFiles: Loaded
<6>[    5.031454] NET: Registered protocol family 2
<6>[    5.031649] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032309] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032491] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032656] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032662] TCP reno registered
<6>[    5.032671] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032701] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032947] NET: Registered protocol family 1
<6>[    5.033239] RPC: Registered named UNIX socket transport module.
<6>[    5.033246] RPC: Registered udp transport module.
<6>[    5.033251] RPC: Registered tcp transport module.
<6>[    5.033256] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033278] PCI: CLS 32 bytes, default 32
<6>[    6.071674] membuf_init: created membuf device(253, 0)
<6>[    6.071965] audit: initializing netlink socket (disabled)
<5>[    6.071988] type=2000 audit(6.070:1): initialized
<5>[    6.072971] VFS: Disk quotas dquot_6.5.2
<4>[    6.073114] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073743] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074690] fuse init (API version 7.17)
<6>[    6.074888] msgmni has been set to 932
<6>[    6.076587] async_tx: api initialized (async)
<6>[    6.076700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076710] io scheduler noop registered
<6>[    6.076715] io scheduler deadline registered
<6>[    6.076780] io scheduler cfq registered (default)
<6>[    6.077080] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.374895] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025472] console [ttyS0] enabled
<6>[    7.134858] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231624] brd: module loaded
<6>[    7.321018] loop: module loaded
<6>[    7.325544] nbd: registered device at major 43
<6>[    7.335302] SCSI Media Changer driver v0.25 
<7>[    7.339687] ahci 0000:00:00.0: version 3.0
<4>[    7.339705] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345467] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352497] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.358033] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.366160] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.375231] scsi0 : ahci
<6>[    7.378139] scsi1 : ahci
<6>[    7.380863] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.388195] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395671] SATA Serdes: 48Mhz ref clk
<6>[    7.399914] Serdes2: Lane OK Passed
<4>[    7.403430] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.408116] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415892] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.424468] scsi2 : ahci_platform
<6>[    7.428009] scsi3 : ahci_platform
<6>[    7.431500] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.439442] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.448303] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457666] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465566] Fixed MDIO Bus: probed
<6>[    7.469027] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.673212] Core Release: 2.81a
<4>[    7.676363] Setting default values for core params
<6>[    7.790249] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.795705] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.880950] Using Buffer DMA mode
<4>[    7.884274] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.890122] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895713] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.900112] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904918] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904933] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904945] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.912042] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.917429] Init: Port Power? op_state=1
<4>[    7.921369] Init: Power Port (0)
<7>[    7.924643] usb usb1: default language 0x0409
<7>[    7.924661] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924668] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938728] usb usb1: Product: DWC OTG Controller
<6>[    7.940264] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.949659] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.955004] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.959392] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.966214] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.973800] usb usb1: usb_probe_device
<7>[    7.973810] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.973834] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.973923] hub 1-0:1.0: usb_probe_interface
<7>[    7.973929] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.973936] hub 1-0:1.0: USB hub found
<6>[    7.974143] ata1.00: configured for UDMA/133
<6>[    7.982003] hub 1-0:1.0: 1 port detected
<7>[    7.985937] hub 1-0:1.0: standalone hub
<7>[    7.985942] hub 1-0:1.0: ganged power switching
<7>[    7.985948] hub 1-0:1.0: individual port over-current protection
<7>[    7.985954] hub 1-0:1.0: Single TT
<7>[    7.985960] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.985967] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.985980] hub 1-0:1.0: local power source is good
<7>[    7.985987] hub 1-0:1.0: enabling power on all ports
<7>[    7.986380] drivers/usb/core/inode.c: creating file '001'
<5>[    7.986483] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<7>[    7.986507] Module dwc_common_port init
<6>[    7.994620] ata1.00: set queue depth = 31
<4>[    7.998805] Check proc_name[ahci].
<5>[    8.002508] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<6>[    8.002534] mousedev: PS/2 mouse device common for all mice
<5>[    8.002618] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    8.002887] i2c /dev entries driver
<4>[    8.002982] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.003401] comcerto_wdt: support registered
<6>[    8.003434] md: linear personality registered for level -1
<6>[    8.003439] md: raid0 personality registered for level 0
<6>[    8.003444] md: raid1 personality registered for level 1
<6>[    8.003449] md: raid10 personality registered for level 10
<6>[    8.003454] md: raid6 personality registered for level 6
<6>[    8.003458] md: raid5 personality registered for level 5
<6>[    8.003463] md: raid4 personality registered for level 4
<6>[    8.003468] md: multipath personality registered for level -4
<5>[    8.079903] sd 0:0:0:0: [sda] 4096-byte physical blocks
<4>[    8.085292] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.085296] 
<7>[    8.093806] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.093912] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<5>[    8.094015] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.094023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.094084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<4>[    8.116314] dm_crypt using the OCF for crypto acceleration.
<6>[    8.122134] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.127640] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.134198] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.140839] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.151490] ALSA device list:
<6>[    8.154469]   No soundcards found.
<6>[    8.158513] TCP cubic registered
<6>[    8.161774] NET: Registered protocol family 17
<6>[    8.166257] NET: Registered protocol family 15
<6>[    8.170722] Initializing NETLINK_KEY socket
<6>[    8.171463]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.179039] NET: Registered protocol family 5
<5>[    8.179724] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.188140] lib80211: common routines for IEEE802.11 drivers
<7>[    8.193826] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.193832] Registering the dns_resolver key type
<6>[    8.198586] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.206292] Clocks: disabled unused pll2
<6>[    8.210226] Clocks: disabled unused uart
<6>[    8.214163] Clocks: disabled unused gemtx
<6>[    8.218182] Clocks: disabled unused ipsec_spacc
<6>[    8.222726] Clocks: disabled unused dpi_cie
<6>[    8.226919] Clocks: disabled unused dpi_decomp
<6>[    8.231378] Clocks: disabled unused ntgref
<6>[    8.235485] Clocks: disabled unused pcie1
<6>[    8.239503] Clocks: disabled unused usb1
<6>[    8.243440] Clocks: disabled unused ext_phy0
<6>[    8.247720] Clocks: disabled unused ext_phy1
<6>[    8.252003] Clocks: disabled unused ext_phy2
<6>[    8.256283] Clocks: disabled unused tpi
<6>[    8.260126] Clocks: disabled unused csys
<6>[    8.264061] Clocks: disabled unused tsuntg
<6>[    8.268167] Clocks: disabled unused sata_occ
<6>[    8.272450] Clocks: disabled unused pcie_occ
<6>[    8.276729] Clocks: disabled unused sgmii_occ
<7>[    8.290285] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290311] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290315] 
<7>[    8.298799] hub 1-0:1.0: over-current change on port 1
<7>[    8.400262] hub 1-0:1.0: enabling power on all ports
<4>[    8.482690] Registering CPUFreq(comcerto)
<4>[    8.486990] Please be patient, while OpenWrt loads ...
<6>[    8.630269] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.637101] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.643924] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.651850] ata2.00: configured for UDMA/133
<5>[    8.656509] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.664647] ata2.00: set queue depth = 31
<4>[    8.668866] Check proc_name[ahci].
<5>[    8.672497] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.680369] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.685720] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.685852] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.685861] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.685925] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.732532]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.737943] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.760101] Freeing init memory: 13476K
<6>[    9.270340] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.277073] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.536264] RTC_TIME:Thu Feb 13 07:08:21 2020  0.000000 seconds
<6>[    9.560306] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.564957] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.570933] Creating 2 MTD partitions on "spi0.0":
<5>[    9.575746] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.581506] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.591803] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.598890] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.604082] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.612723] Using default values for hw ecc
<4>[    9.620352] Bad block table not found for chip 0
<4>[    9.628353] Bad block table not found for chip 0
<6>[    9.632986] Scanning device for bad blocks
<4>[    9.638131] Bad eraseblock 18 at 0x000000240000
<4>[    9.645619] Bad eraseblock 72 at 0x000000900000
<4>[    9.665306] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.671623] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.702504] Bad eraseblock 863 at 0x000006be0000
<4>[    9.728157] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.747920] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.895847] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.905365] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.911677] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.918136] Creating 5 MTD partitions on "comcertonand":
<5>[    9.923469] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.929758] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.936134] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.942329] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.948671] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.961668] usbcore: registered new interface driver usbhid
<6>[    9.967259] usbhid: USB HID core driver
<6>[    9.976750] usbcore: registered new interface driver usblp
<6>[    9.989322] ## xhci_plat_probe
<6>[    9.992428] ### comcerto_start_xhci
<6>[    9.995936] USB3.0 clock selected: internal
<6>[   10.003385] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.008300] drivers/usb/core/inode.c: creating file '002'
<6>[   10.008321] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.015554] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.020927] usb usb2: default language 0x0409
<7>[   10.020945] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.020953] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.027760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.035009] usb usb2: Product: xHCI Host Controller
<6>[   10.039899] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.045319] usb usb2: SerialNumber: xhci-hcd
<7>[   10.049857] usb usb2: usb_probe_device
<7>[   10.049867] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.049877] xHCI xhci_add_endpoint called for root hub
<7>[   10.049884] xHCI xhci_check_bandwidth called for root hub
<7>[   10.049904] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.049999] hub 2-0:1.0: usb_probe_interface
<7>[   10.050006] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.050012] hub 2-0:1.0: USB hub found
<6>[   10.053803] hub 2-0:1.0: 1 port detected
<7>[   10.057736] hub 2-0:1.0: standalone hub
<7>[   10.057741] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.057747] hub 2-0:1.0: individual port over-current protection
<7>[   10.057753] hub 2-0:1.0: Single TT
<7>[   10.057759] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.057766] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.057780] hub 2-0:1.0: local power source is good
<7>[   10.057787] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.057930] drivers/usb/core/inode.c: creating file '001'
<6>[   10.058004] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.062932] drivers/usb/core/inode.c: creating file '003'
<6>[   10.062948] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.070047] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.070062] usb usb3: default language 0x0409
<7>[   10.070079] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.070086] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.076912] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.084167] usb usb3: Product: xHCI Host Controller
<6>[   10.089056] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.094475] usb usb3: SerialNumber: xhci-hcd
<7>[   10.098982] usb usb3: usb_probe_device
<7>[   10.098991] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.099000] xHCI xhci_add_endpoint called for root hub
<7>[   10.099006] xHCI xhci_check_bandwidth called for root hub
<7>[   10.099024] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.099118] hub 3-0:1.0: usb_probe_interface
<7>[   10.099125] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.099131] hub 3-0:1.0: USB hub found
<6>[   10.102912] hub 3-0:1.0: 1 port detected
<7>[   10.106846] hub 3-0:1.0: standalone hub
<7>[   10.106851] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.106857] hub 3-0:1.0: individual port over-current protection
<7>[   10.106864] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.106871] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.106884] hub 3-0:1.0: local power source is good
<7>[   10.106891] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.107026] drivers/usb/core/inode.c: creating file '001'
<6>[   10.114476] Initializing USB Mass Storage driver...
<6>[   10.119483] usbcore: registered new interface driver usb-storage
<6>[   10.125530] USB Mass Storage support registered.
<7>[   10.150296] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.200313] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.251059] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.251095] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.370322] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.392547] usb 2-1: default language 0x0409
<7>[   10.393086] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.393095] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.399827] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.407061] usb 2-1: Product: USB2.0 Hub
<6>[   10.411024] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.415974] usb 2-1: usb_probe_device
<7>[   10.415989] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.422072] usb 2-1: Successful Endpoint Configure command
<7>[   10.422335] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.422479] hub 2-1:1.0: usb_probe_interface
<7>[   10.422490] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.422499] hub 2-1:1.0: USB hub found
<6>[   10.426540] hub 2-1:1.0: 4 ports detected
<7>[   10.430607] hub 2-1:1.0: standalone hub
<7>[   10.430614] hub 2-1:1.0: individual port power switching
<7>[   10.430620] hub 2-1:1.0: individual port over-current protection
<7>[   10.454475] usb 2-1: Successful Endpoint Configure command
<7>[   10.454803] hub 2-1:1.0: TT per port
<7>[   10.454812] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.454819] hub 2-1:1.0: Port indicators are supported
<7>[   10.454826] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.455091] usb 2-1: Successful Endpoint Configure command
<7>[   10.455300] hub 2-1:1.0: local power source is good
<7>[   10.455312] hub 2-1:1.0: enabling power on all ports
<7>[   10.456121] drivers/usb/core/inode.c: creating file '002'
<7>[   10.456216] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.456244] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.499784] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.506203] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<4>[   10.547672] flashcache: flashcache-1.0-dummy initialized
<7>[   10.561140] hub 2-1:1.0: port 4: status 0301 change 0001
<6>[   10.570446] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.592214] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.592387] usb 3-1: default language 0x0409
<7>[   10.592919] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.592929] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.599656] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.606830] usb 3-1: Product: USB3.0 Hub
<6>[   10.610771] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.615568] usb 3-1: usb_probe_device
<7>[   10.615578] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.630047] usb 3-1: Successful Endpoint Configure command
<7>[   10.630261] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.630687] hub 3-1:1.0: usb_probe_interface
<7>[   10.630695] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.630702] hub 3-1:1.0: USB hub found
<6>[   10.634742] hub 3-1:1.0: 4 ports detected
<7>[   10.638764] hub 3-1:1.0: standalone hub
<7>[   10.638769] hub 3-1:1.0: individual port power switching
<7>[   10.638775] hub 3-1:1.0: individual port over-current protection
<7>[   10.638783] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.638790] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.638978] usb 3-1: Successful Endpoint Configure command
<7>[   10.639123] hub 3-1:1.0: local power source is good
<7>[   10.639243] hub 3-1:1.0: enabling power on all ports
<7>[   10.639987] drivers/usb/core/inode.c: creating file '002'
<7>[   10.660270] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.660435] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.719863] UBI: attaching mtd3 to ubi0
<5>[   10.723734] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.730018] UBI: logical eraseblock size:    126976 bytes
<5>[   10.735437] UBI: smallest flash I/O unit:    2048
<5>[   10.740153] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.746183] UBI: data offset:                4096
<6>[   10.746375] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<7>[   10.764374] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.764936] usb 2-1.4: default language 0x0409
<7>[   10.772571] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.772580] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.779476] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.786815] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.793712] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.799561] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.804720] usb 2-1.4: usb_probe_device
<7>[   10.804731] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.804797] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.838027] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.838722] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.838834] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.838842] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.168258] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.168412] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.184178] drivers/usb/core/inode.c: creating file '003'
<7>[   11.184257] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.233656] UBI: max. sequence number:       2
<5>[   12.250470] UBI: attached mtd3 to ubi0
<5>[   12.254230] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.259903] UBI: MTD device size:            216 MiB
<5>[   12.264906] UBI: number of good PEBs:        1723
<5>[   12.269622] UBI: number of bad PEBs:         5
<5>[   12.274084] UBI: number of corrupted PEBs:   0
<5>[   12.278539] UBI: max. allowed volumes:       128
<5>[   12.283172] UBI: wear-leveling threshold:    4096
<5>[   12.287887] UBI: number of internal volumes: 1
<5>[   12.292344] UBI: number of user volumes:     1
<5>[   12.296797] UBI: available PEBs:             0
<5>[   12.301256] UBI: total number of reserved PEBs: 1723
<5>[   12.306232] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.312345] UBI: max/mean erase counter: 22/14
<5>[   12.316800] UBI: image sequence number:  1535285440
<5>[   12.321707] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.438001] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.444127] UBIFS: mounted read-only
<5>[   12.447713] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.455748] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.463090] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.468938] UBIFS: default compressor: lzo
<5>[   12.473051] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.845545] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.909322] UBI: mtd3 is detached from ubi0
<6>[   33.922324] usbcore: registered new interface driver usbserial
<6>[   33.928177] usbserial: USB Serial Driver core
<6>[   33.938141] USB Serial support registered for pl2303
<6>[   33.943238] usbcore: registered new interface driver pl2303
<6>[   33.948825] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.960736] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.974381] ufsd: module license 'Commercial product' taints kernel.
<4>[   33.980778] Disabling lock debugging due to kernel taint
<5>[   34.007185] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.007191] NTFSJ support included
<5>[   34.007193] exFAT support included
<5>[   34.007195] Hfs+J support included
<5>[   34.007197] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.034442] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.038899] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.312744] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.322102] udev: starting version 140
<6>[   34.328842] pfe_module_init
<6>[   34.331734] pfe_platform_probe
<6>[   34.335831] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.341656] pfe_probe
<6>[   34.343934] PFE Driver version:
<6>[   34.343936] pfe_ctrl_10_00_4
<6>[   34.343938] built with pfe sources version: pfe_10_00_3
<6>[   34.355208] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.364805] pfe_hw_init
<6>[   34.367256] CLASS version: 20
<6>[   34.370234] TMU version: 1011231
<6>[   34.373469] BMU1 version: 21
<6>[   34.376355] BMU2 version: 21
<6>[   34.379241] EMAC1 network cfg: 80000
<6>[   34.382828] EMAC2 network cfg: 80000
<6>[   34.386411] EMAC3 network cfg: 80000
<6>[   34.389994] EGPI1 version: 50
<6>[   34.392972] EGPI2 version: 50
<6>[   34.395946] EGPI3 version: 50
<6>[   34.398919] HGPI version: 50
<6>[   34.401810] GPT version: 0
<6>[   34.404523] HIF version: 10
<6>[   34.407321] HIF NOPCY version: 10
<6>[   34.410648] UTIL version: 20
<6>[   34.413535] bmu_init(1) done
<6>[   34.416422] bmu_init(2) done
<6>[   34.425766] class_init() done
<6>[   34.428744] tmu_init: mem init
<6>[   34.431811] tmu_init: lmem init
<6>[   34.435003] tmu_init() done
<6>[   34.437803] util_init() done
<6>[   34.440697] gpi_init(1) done
<6>[   34.443585] gpi_init(2) done
<6>[   34.446473] gpi_init(3) done
<6>[   34.449361] gpi_init(hif) done
<6>[   34.452424] bmu_enable(1) done
<6>[   34.455485] bmu_enable(2) done
<6>[   34.458546] pfe_hif_lib_init
<6>[   34.461611] pfe_hif_init
<6>[   34.464151] pfe_hif_alloc_descr
<6>[   34.467398] pfe_hif_init_buffers
<6>[   34.470764] pfe_firmware_init
<6>[   34.633328] pfe_load_elf
<3>[   34.635881] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.667428] PFE binary version: pfe_10_00_3
<6>[   34.671641] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.678099] pfe_load_elf
<6>[   34.682020] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.687345] pfe_load_elf
<6>[   34.691670] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.697207] pfe_ctrl_init
<6>[   34.717949] pfe_ctrl_init finished
<6>[   34.717955] pfe_ctrl_timer
<6>[   34.724098] pfe_eth_init
<6>[   34.735442] Comcerto MDIO Bus: probed
<6>[   34.740436] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.748895] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.755777] pfe_vwd_init
<6>[   34.758420] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.763425] pfe_vwd_driver_init: start
<4>[   34.767189] pfe_vwd_up: start
<6>[   34.770224] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.777311] pfe_vwd_driver_init: end
<6>[   34.780902] pfe_pcap_init
<6>[   34.823374] eth0: pfe_eth_open
<6>[   34.826590] hif_process_client_req: register client_id 0
<6>[   34.831970] pfe_hif_client_register
<6>[   34.835526] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.843854] eth0: pfe_gemac_init
<6>[   34.848287] eth0: pfe_eth_close
<6>[   34.890288] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.899711] hif_process_client_req: unregister client_id 0
<6>[   34.905220] pfe_hif_client_unregister
<6>[   34.909350] eth1: pfe_eth_open
<6>[   34.912545] hif_process_client_req: register client_id 1
<6>[   34.917870] pfe_hif_client_register
<6>[   34.921381] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.929669] eth1: pfe_gemac_init
<6>[   34.933548] eth1: pfe_eth_close
<6>[   34.970241] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.979661] hif_process_client_req: unregister client_id 1
<6>[   34.985166] pfe_hif_client_unregister
<6>[   35.411829] kjournald starting.  Commit interval 5 seconds
<6>[   35.417360] EXT3-fs (sda1): using internal journal
<6>[   35.422191] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.834092] kjournald starting.  Commit interval 5 seconds
<6>[   35.842470] EXT3-fs (sda1): using internal journal
<6>[   35.847279] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.282077] kjournald starting.  Commit interval 5 seconds
<6>[   36.282349] EXT3-fs (sdb1): using internal journal
<6>[   36.282359] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.624238] md: md9 stopped.
<6>[   36.629666] md: bind<sdb1>
<6>[   36.632733] md: bind<sda1>
<6>[   36.638482] bio: create slab <bio-1> at 1
<6>[   36.642750] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.648321] created bitmap (1 pages) for device md9
<6>[   36.653407] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.678442] md9: detected capacity change from 0 to 542769152
<6>[   37.738192]  md9: unknown partition table
<6>[   38.001195] kjournald starting.  Commit interval 5 seconds
<6>[   38.016429] EXT3-fs (md9): using internal journal
<6>[   38.021179] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.335411] md: md13 stopped.
<6>[   38.343954] md: bind<sdb4>
<6>[   38.346973] md: bind<sda4>
<6>[   38.352873] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.358531] created bitmap (1 pages) for device md13
<6>[   38.363731] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.447245] md13: detected capacity change from 0 to 469893120
<4>[   56.167476] set stripe cache size 1024
<4>[   56.172319] STRIPE_CACHE_SIZE is 1024
<6>[   57.114653] md: bind<sda2>
<6>[   57.127978] md: bind<sdb2>
<6>[   57.133817] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   57.139511] created bitmap (1 pages) for device md256
<6>[   57.144816] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   57.172710] md256: detected capacity change from 0 to 542834688
<6>[   57.241721]  md256: unknown partition table
<6>[   57.316253] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   57.701740] md: bind<sda5>
<6>[   57.704700] md: bind<sdb5>
<6>[   57.710604] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   57.716299] created bitmap (1 pages) for device md322
<6>[   57.721652] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   57.745920] md322: detected capacity change from 0 to 7408779264
<6>[   57.808433]  md322: unknown partition table
<6>[   57.879626] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   58.227019]  md13: unknown partition table
<6>[   58.532320] md: md1 stopped.
<6>[   58.547067] md: bind<sdb3>
<6>[   58.550056] md: bind<sda3>
<6>[   58.555922] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   58.561377] md1: detected capacity change from 0 to 5990981238784
<6>[   58.631551]  md1: unknown partition table
<6>[   69.323021] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl
<6>[   76.294480] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   80.167013] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   81.211312] [S30mountall] start
<5>[   81.640934] UBI: attaching mtd3 to ubi0
<5>[   81.644788] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   81.651087] UBI: logical eraseblock size:    126976 bytes
<5>[   81.656500] UBI: smallest flash I/O unit:    2048
<5>[   81.661223] UBI: VID header offset:          2048 (aligned 2048)
<5>[   81.667272] UBI: data offset:                4096
<5>[   83.151862] UBI: max. sequence number:       2
<5>[   83.168713] UBI: attached mtd3 to ubi0
<5>[   83.172497] UBI: MTD device name:            "boot1_rootfs2"
<5>[   83.178172] UBI: MTD device size:            216 MiB
<5>[   83.183153] UBI: number of good PEBs:        1723
<5>[   83.187868] UBI: number of bad PEBs:         5
<5>[   83.192326] UBI: number of corrupted PEBs:   0
<5>[   83.196781] UBI: max. allowed volumes:       128
<5>[   83.201412] UBI: wear-leveling threshold:    4096
<5>[   83.206127] UBI: number of internal volumes: 1
<5>[   83.210584] UBI: number of user volumes:     1
<5>[   83.215038] UBI: available PEBs:             0
<5>[   83.219492] UBI: total number of reserved PEBs: 1723
<5>[   83.224472] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   83.230585] UBI: max/mean erase counter: 22/14
<5>[   83.235039] UBI: image sequence number:  1535285440
<5>[   83.239939] UBI: background thread "ubi_bgt0d" started, PID 1607
<5>[   83.362594] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   83.368708] UBIFS: mounted read-only
<5>[   83.372307] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   83.380344] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   83.387672] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   83.393525] UBIFS: default compressor: lzo
<5>[   83.397631] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  104.545881] UBIFS: un-mount UBI device 0, volume 0
<5>[  104.619718] UBI: mtd3 is detached from ubi0
<5>[  105.157683] UBI: attaching mtd3 to ubi0
<5>[  105.161561] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  105.167844] UBI: logical eraseblock size:    126976 bytes
<5>[  105.173262] UBI: smallest flash I/O unit:    2048
<5>[  105.177979] UBI: VID header offset:          2048 (aligned 2048)
<5>[  105.184004] UBI: data offset:                4096
<5>[  106.665988] UBI: max. sequence number:       2
<5>[  106.682850] UBI: attached mtd3 to ubi0
<5>[  106.686616] UBI: MTD device name:            "boot1_rootfs2"
<5>[  106.692305] UBI: MTD device size:            216 MiB
<5>[  106.697281] UBI: number of good PEBs:        1723
<5>[  106.702005] UBI: number of bad PEBs:         5
<5>[  106.706459] UBI: number of corrupted PEBs:   0
<5>[  106.710918] UBI: max. allowed volumes:       128
<5>[  106.715545] UBI: wear-leveling threshold:    4096
<5>[  106.720264] UBI: number of internal volumes: 1
<5>[  106.724718] UBI: number of user volumes:     1
<5>[  106.729172] UBI: available PEBs:             0
<5>[  106.733630] UBI: total number of reserved PEBs: 1723
<5>[  106.738606] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  106.744719] UBI: max/mean erase counter: 22/14
<5>[  106.749173] UBI: image sequence number:  1535285440
<5>[  106.754078] UBI: background thread "ubi_bgt0d" started, PID 1737
<5>[  106.883548] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  106.889661] UBIFS: mounted read-only
<5>[  106.893266] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  106.901304] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  106.908633] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  106.914487] UBIFS: default compressor: lzo
<5>[  106.918594] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  106.997739] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.073090] UBI: mtd3 is detached from ubi0
<6>[  107.233066] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  123.133705] UBI: attaching mtd6 to ubi2
<5>[  123.137558] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  123.143942] UBI: logical eraseblock size:    126976 bytes
<5>[  123.149404] UBI: smallest flash I/O unit:    2048
<5>[  123.154137] UBI: VID header offset:          2048 (aligned 2048)
<5>[  123.160159] UBI: data offset:                4096
<5>[  123.511184] UBI: max. sequence number:       293
<5>[  123.533884] UBI: attached mtd6 to ubi2
<5>[  123.537654] UBI: MTD device name:            "config"
<5>[  123.542775] UBI: MTD device size:            15 MiB
<5>[  123.547675] UBI: number of good PEBs:        120
<5>[  123.552334] UBI: number of bad PEBs:         0
<5>[  123.556793] UBI: number of corrupted PEBs:   0
<5>[  123.561270] UBI: max. allowed volumes:       128
<5>[  123.565908] UBI: wear-leveling threshold:    4096
<5>[  123.570649] UBI: number of internal volumes: 1
<5>[  123.575103] UBI: number of user volumes:     1
<5>[  123.579556] UBI: available PEBs:             0
<5>[  123.584020] UBI: total number of reserved PEBs: 120
<5>[  123.588910] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  123.594947] UBI: max/mean erase counter: 4/3
<5>[  123.599233] UBI: image sequence number:  1872325126
<5>[  123.620274] UBI: background thread "ubi_bgt2d" started, PID 2177
<5>[  123.853428] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  123.859460] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  123.867089] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  123.874442] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  123.880302] UBIFS: default compressor: lzo
<5>[  123.884411] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  124.403939] UBIFS: un-mount UBI device 2, volume 0
<5>[  124.499062] UBI: mtd6 is detached from ubi2
<4>[  124.892560] [S30mountall] end
<4>[  124.896176] [S31init_hardware] start
<6>[  125.117461] sysinfo: Module loaded.
<6>[  125.517701] fnotify: Load file notify kernel module.
<6>[  126.933215] usbcore: registered new interface driver snd-usb-audio
<6>[  126.945720] usbcore: registered new interface driver snd-usb-caiaq
<6>[  126.967150] Linux video capture interface: v2.00
<6>[  126.997493] usbcore: registered new interface driver uvcvideo
<6>[  127.003303] USB Video Class driver (1.1.1)
<6>[  127.210404] NET: Registered protocol family 10
<4>[  130.206496] [S31init_hardware] end
<4>[  130.210733] [S32init_mac_addr] start
<6>[  131.351966] eth0: pfe_eth_open
<6>[  131.355165] hif_process_client_req: register client_id 1
<6>[  131.360505] pfe_hif_client_register
<6>[  131.364008] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  131.372304] eth0: pfe_gemac_init
<6>[  131.376109] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  132.979671] eth1: pfe_eth_open
<6>[  132.982896] hif_process_client_req: register client_id 0
<6>[  132.988222] pfe_hif_client_register
<6>[  132.991735] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  133.000024] eth1: pfe_gemac_init
<6>[  133.003835] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[  134.370448] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  134.375867] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  135.179450] [S32init_mac_addr] end
<4>[  135.183450] [S33sysinit] start
<6>[  144.370453] PHY: comcerto-0:06 - Link is Down
<6>[  145.370460] PHY: comcerto-0:06 - Link is Up - 1000/Full
<7>[  145.660239] eth0: no IPv6 routers present
<5>[  156.362575] UBI: attaching mtd6 to ubi2
<5>[  156.366427] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  156.372741] UBI: logical eraseblock size:    126976 bytes
<5>[  156.378154] UBI: smallest flash I/O unit:    2048
<5>[  156.382880] UBI: VID header offset:          2048 (aligned 2048)
<5>[  156.388901] UBI: data offset:                4096
<5>[  156.496646] UBI: max. sequence number:       294
<5>[  156.511937] UBI: attached mtd6 to ubi2
<5>[  156.515702] UBI: MTD device name:            "config"
<5>[  156.520791] UBI: MTD device size:            15 MiB
<5>[  156.525681] UBI: number of good PEBs:        120
<5>[  156.530320] UBI: number of bad PEBs:         0
<5>[  156.534775] UBI: number of corrupted PEBs:   0
<5>[  156.539228] UBI: max. allowed volumes:       128
<5>[  156.543865] UBI: wear-leveling threshold:    4096
<5>[  156.548580] UBI: number of internal volumes: 1
<5>[  156.553040] UBI: number of user volumes:     1
<5>[  156.557494] UBI: available PEBs:             0
<5>[  156.561955] UBI: total number of reserved PEBs: 120
<5>[  156.566845] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  156.572872] UBI: max/mean erase counter: 4/3
<5>[  156.577151] UBI: image sequence number:  1872325126
<5>[  156.582058] UBI: background thread "ubi_bgt2d" started, PID 2838
<5>[  156.708550] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  156.714594] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  156.722192] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  156.729521] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  156.735379] UBIFS: default compressor: lzo
<5>[  156.739486] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  156.759887] UBIFS: un-mount UBI device 2, volume 0
<4>[  243.000482] [S33sysinit] end
<4>[  243.003974] [S34shutdown_check] start
<4>[  243.282473] [S34shutdown_check] end
<4>[  243.286761] [S35init_disk] start
<5>[  243.601582] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  243.607610] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  243.615215] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  243.622551] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  243.628399] UBIFS: default compressor: lzo
<5>[  243.632511] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  243.769000] UBIFS: un-mount UBI device 2, volume 0
<5>[  243.826236] UBI: mtd6 is detached from ubi2
<4>[  245.339768] [S35init_disk] end
<4>[  245.343632] [S40init_network] start
<4>[  245.357097] [S40init_network] end
<4>[  245.361087] [S42hostname] start
<4>[  245.808410] [S42hostname] end
<4>[  245.812185] [S45network] start
<5>[  255.875239] Bridge firewalling registered
<6>[  256.425778] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  256.432989] bonding: MII link monitoring set to 100 ms
<6>[  264.166323] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  273.255211] [S45network] end
<4>[  273.258838] [S46iSCSItrgt] start
<4>[  278.610119] [S46iSCSItrgt] end
<4>[  278.613790] [S46iscsiinit] start
<6>[  278.640020] Loading iSCSI transport class v2.0-870.
<5>[  278.673181] iscsi: registered transport (tcp)
<4>[  280.124496] [S46iscsiinit] end
<4>[  280.128136] [S55urandom] start
<4>[  280.160534] [S55urandom] end
<4>[  280.164009] [S56mariadb] start
<4>[  286.640162] [S56mariadb] end
<4>[  286.643685] [S56start_service] start
<4>[  286.738464] [S56start_service] end
<4>[  286.742546] [S57init_qpkg] start
<4>[  414.312305] [S57init_qpkg] end
<4>[  414.315927] [S57ldap] start
<4>[  414.354944] [S57ldap] end
<4>[  414.358253] [S58dbus] start
<4>[  416.604717] [S58dbus] end
<4>[  416.607903] [S58nsswitch] start
<4>[  416.794025] [S58nsswitch] end
<4>[  416.797553] [S58printer] start
<4>[  416.864450] [S58printer] end
<4>[  421.872514] [S59Qthttpd] start
<4>[  437.211681] [S59Qthttpd] end
<4>[  437.216636] [S62cupsd] start
<4>[  438.545034] [S62cupsd] end
<4>[  438.548317] [S62ntpd] start
<4>[  438.631248] [S62ntpd] end
<4>[  438.634400] [S62smb] start
<4>[  447.016070] ==== memory usage ====
<4>[  447.042258] MemTotal:         490756 kB
<4>[  447.046157] MemFree:           67688 kB
<4>[  447.050098] Buffers:           18676 kB
<4>[  447.054117] Cached:           282596 kB
<4>[  447.057987] SwapCached:           72 kB
<4>[  447.061964] Active:           122836 kB
<4>[  447.065830] Inactive:         247868 kB
<4>[  447.069707] Active(anon):      56140 kB
<4>[  447.073633] Inactive(anon):    69044 kB
<4>[  447.077499] Active(file):      66696 kB
<4>[  447.081388] Inactive(file):   178824 kB
<4>[  447.085247] Unevictable:        2012 kB
<4>[  447.089125] Mlocked:            2012 kB
<4>[  447.093029] SwapTotal:      24542452 kB
<4>[  447.096901] SwapFree:       24542172 kB
<4>[  447.100782] Dirty:               148 kB
<4>[  447.104672] Writeback:             0 kB
<4>[  447.108538] AnonPages:         71388 kB
<4>[  447.112485] Mapped:            16780 kB
<4>[  447.116383] Shmem:             55616 kB
<4>[  447.120290] Slab:              34340 kB
<4>[  447.124176] SReclaimable:      22556 kB
<4>[  447.128081] SUnreclaim:        11784 kB
<4>[  447.131986] KernelStack:        1880 kB
<4>[  447.135870] PageTables:         1564 kB
<4>[  447.139756] NFS_Unstable:          0 kB
<4>[  447.143660] Bounce:                0 kB
<4>[  447.147554] WritebackTmp:          0 kB
<4>[  447.151469] CommitLimit:    24787828 kB
<4>[  447.155345] Committed_AS:    1188780 kB
<4>[  447.159211] VmallocTotal:    1302528 kB
<4>[  447.163089] VmallocUsed:       61368 kB
<4>[  447.166960] VmallocChunk:    1212348 kB
<4>[  447.194319] Node 0, zone      DMA
<4>[  447.197674]   pages free     10967
<4>[  447.201197]         min      366
<4>[  447.204463]         low      457
<4>[  447.207743]         high     549
<4>[  447.218056]         scanned  0
<4>[  447.221205]         spanned  11264
<4>[  447.224662]         present  11154
<4>[  447.228255]     nr_free_pages 10967
<4>[  447.231835]     nr_inactive_anon 0
<4>[  447.235265]     nr_active_anon 0
<4>[  447.238517]     nr_inactive_file 0
<4>[  447.241979]     nr_active_file 0
<4>[  447.246032]     nr_unevictable 0
<4>[  447.249326]     nr_mlock     0
<4>[  447.252518]     nr_anon_pages 0
<4>[  447.255711]     nr_mapped    0
<4>[  447.258811]     nr_file_pages 0
<4>[  447.262022]     nr_dirty     0
<4>[  447.265112]     nr_writeback 0
<4>[  447.268188]     nr_slab_reclaimable 0
<4>[  447.271919]     nr_slab_unreclaimable 0
<4>[  447.275779]     nr_page_table_pages 0
<4>[  447.279467]     nr_kernel_stack 0
<4>[  447.282866]     nr_unstable  0
<4>[  447.285971]     nr_bounce    0
<4>[  447.289086]     nr_vmscan_write 0
<4>[  447.292473]     nr_vmscan_immediate_reclaim 0
<4>[  447.296883]     nr_writeback_temp 0
<4>[  447.300436]     nr_isolated_anon 0
<4>[  447.303882]     nr_isolated_file 0
<4>[  447.307319]     nr_shmem     0
<4>[  447.310418]     nr_dirtied   0
<4>[  447.313498]     nr_written   0
<4>[  447.316577]     nr_anon_transparent_hugepages 0
<4>[  447.321171]         protection: (0, 443, 443)
<4>[  447.325578]   pagesets
<4>[  447.329013]     cpu: 0
<4>[  447.331456]               count: 2
<4>[  447.337337]               high:  6
<4>[  447.340812]               batch: 1
<4>[  447.344252]   vm stats threshold: 4
<4>[  447.347761]     cpu: 1
<4>[  447.350136]               count: 5
<4>[  447.353571]               high:  6
<4>[  447.356994]               batch: 1
<4>[  447.360429]   vm stats threshold: 4
<4>[  447.363936]   all_unreclaimable: 0
<4>[  447.367355]   start_pfn:         0
<4>[  447.370800]   inactive_ratio:    1
<4>[  447.374223] Node 0, zone   Normal
<4>[  447.377556]   pages free     5939
<4>[  447.380905]         min      3729
<4>[  447.384239]         low      4661
<4>[  447.387571]         high     5593
<4>[  447.390915]         scanned  0
<4>[  447.393988]         spanned  119808
<4>[  447.397509]         present  113518
<4>[  447.401060]     nr_free_pages 5939
<4>[  447.404503]     nr_inactive_anon 17261
<4>[  447.408285]     nr_active_anon 14009
<4>[  447.411921]     nr_inactive_file 44706
<4>[  447.415702]     nr_active_file 16674
<4>[  447.419305]     nr_unevictable 503
<4>[  447.422748]     nr_mlock     503
<4>[  447.426003]     nr_anon_pages 17828
<4>[  447.429515]     nr_mapped    4214
<4>[  447.432872]     nr_file_pages 75336
<4>[  447.436386]     nr_dirty     37
<4>[  447.439554]     nr_writeback 0
<4>[  447.442648]     nr_slab_reclaimable 5639
<4>[  447.446597]     nr_slab_unreclaimable 2946
<4>[  447.450738]     nr_page_table_pages 391
<4>[  447.454600]     nr_kernel_stack 235
<4>[  447.458114]     nr_unstable  0
<4>[  447.461202]     nr_bounce    0
<4>[  447.464282]     nr_vmscan_write 70
<4>[  447.467708]     nr_vmscan_immediate_reclaim 0
<4>[  447.472106]     nr_writeback_temp 0
<4>[  447.475619]     nr_isolated_anon 0
<4>[  447.479056]     nr_isolated_file 0
<4>[  447.482497]     nr_shmem     13904
<4>[  447.485925]     nr_dirtied   239461
<4>[  447.489437]     nr_written   237333
<4>[  447.492964]     nr_anon_transparent_hugepages 0
<4>[  447.497524]         protection: (0, 0, 0)
<4>[  447.501572]   pagesets
<4>[  447.503952]     cpu: 0
<4>[  447.506334]               count: 93
<4>[  447.509846]               high:  186
<4>[  447.513460]               batch: 31
<4>[  447.516970]   vm stats threshold: 12
<4>[  447.520581]     cpu: 1
<4>[  447.522966]               count: 75
<4>[  447.526479]               high:  186
<4>[  447.530075]               batch: 31
<4>[  447.533599]   vm stats threshold: 12
<4>[  447.537195]   all_unreclaimable: 0
<4>[  447.540632]   start_pfn:         11264
<4>[  447.544402]   inactive_ratio:    1
<4>[  447.572128] Filename				Type		Size	Used	Priority
<4>[  447.576789] /dev/md256                              partition	530108	280	-1
<4>[  447.583835] /dev/md322                              partition	7235132	0	-2
<4>[  447.590762] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  447.614539]               total         used         free       shared      buffers
<4>[  447.614546]   Mem:       490756       424928        65828            0        18704
<4>[  447.614550]  Swap:     24542452          280     24542172
<4>[  447.614553] Total:     25033208       425208     24608000
<4>[  447.657387] ==== end ====
<4>[  463.580088] [S62smb] end
<4>[  463.583311] [S64MediaService] start
<4>[  464.181832] [S64MediaService] end
<4>[  464.186005] [S65thttpd] start
<4>[  472.031411] [S65thttpd] end
<4>[  472.034765] [S66ImRd] start
<4>[  472.038899] [S66ImRd] end
<4>[  472.042448] [S66wfm_thttpd] start
<4>[  474.661406] [S66wfm_thttpd] end
<4>[  474.665086] [S67ftp] start
<4>[  474.837615] [S67ftp] end
<4>[  474.840796] [S70crond] start
<4>[  474.844925] [S70crond] end
<4>[  474.848243] [S72logo] start
<4>[  474.861672] [S72logo] end
<4>[  474.864944] [S73ntpclient] start
<4>[  474.877129] [S73ntpclient] end
<4>[  474.900558] [S75stunnel] start
<4>[  474.904962] [S75stunnel] end
<4>[  474.908418] [S77recycled] start
<4>[  475.940109] [S77recycled] end
<4>[  475.944248] [S78qraid1] start
<4>[  475.948640] [S78qraid1] end
<4>[  475.961151] [S83ups] start
<4>[  475.965180] [S83ups] end
<4>[  475.978692] [S85login] start
<4>[  475.991480] [S85login] end
<4>[  475.994902] [S89bonjour] start
<4>[  476.020910] [S89bonjour] end
<4>[  476.024525] [S89wsd] start
<4>[  476.028621] [S89wsd] end
<4>[  488.821597] [S90twonkymedia] start
<4>[  488.826401] [S90twonkymedia] end
<4>[  488.830398] [S92lunportman] start
<4>[  488.835336] [S92lunportman] end
<4>[  488.839289] [S95snmp] start
<4>[  488.851618] [S95snmp] end
<4>[  488.854866] [S97upnpd] start
<4>[  488.859111] [S97upnpd] end
<4>[  488.866064] [S98init_nas] start
<5>[  496.787332] UBI: attaching mtd6 to ubi2
<5>[  496.791233] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  496.797520] UBI: logical eraseblock size:    126976 bytes
<5>[  496.802949] UBI: smallest flash I/O unit:    2048
<5>[  496.807670] UBI: VID header offset:          2048 (aligned 2048)
<5>[  496.813731] UBI: data offset:                4096
<5>[  496.948211] UBI: max. sequence number:       296
<5>[  496.963488] UBI: attached mtd6 to ubi2
<5>[  496.967255] UBI: MTD device name:            "config"
<5>[  496.972355] UBI: MTD device size:            15 MiB
<5>[  496.977245] UBI: number of good PEBs:        120
<5>[  496.981885] UBI: number of bad PEBs:         0
<5>[  496.986341] UBI: number of corrupted PEBs:   0
<5>[  496.990804] UBI: max. allowed volumes:       128
<5>[  496.995432] UBI: wear-leveling threshold:    4096
<5>[  497.000147] UBI: number of internal volumes: 1
<5>[  497.004609] UBI: number of user volumes:     1
<5>[  497.009063] UBI: available PEBs:             0
<5>[  497.013526] UBI: total number of reserved PEBs: 120
<5>[  497.018416] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  497.024444] UBI: max/mean erase counter: 4/3
<5>[  497.028723] UBI: image sequence number:  1872325126
<5>[  497.033635] UBI: background thread "ubi_bgt2d" started, PID 11743
<5>[  497.155552] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  497.161601] UBIFS: mounted read-only
<5>[  497.165189] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  497.172788] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  497.180116] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  497.185970] UBIFS: default compressor: lzo
<5>[  497.190077] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  497.202840] UBIFS: un-mount UBI device 2, volume 0
<5>[  497.259825] UBI: mtd6 is detached from ubi2
<4>[  498.479484] rule type=2, num=0
<4>[  502.382662] [S98init_nas] end
<4>[  502.386199] [S99atalk] start
<4>[  502.395418] [S99atalk] end
<4>[  502.398793] [S99cloudinstall_report_complete_daemon] start
<4>[  502.422108] [S99cloudinstall_report_complete_daemon] end
<4>[  502.428066] [S99init_iTune] start
<4>[  502.461997] [S99init_iTune] end
<4>[  502.465779] [S99mysqld] start
<4>[  502.488515] [S99mysqld] end
<4>[  502.517988] [S99nfs] start
<4>[  502.526077] [S99nfs] end
<4>[  502.545899] [S99porter] start
<4>[  502.575249] [S99porter] end
<4>[  502.594056] [S99qanalytic] start
<4>[  502.598733] [S99qanalytic] end
<4>[  502.646149] [S99qcloud] start
<4>[  502.685636] [S99qcloud] end
<4>[  502.689091] [S99qsyncman] start
<4>[  502.721772] [S99qsyncman] end
<4>[  502.725376] [S99sdmd.sh] start
<4>[  502.729693] [S99sdmd.sh] end
<4>[  502.826714] [S99sync_action.sh] start
<4>[  502.861960] [S99sync_action.sh] end
<4>[  502.866202] [S99z_antivirus] start
<4>[  502.931019] [S99z_antivirus] end
<4>[  598.830222] ====== 2020-02-13 07:18:09 TS-231 (4.3.6.1154-20191212) boot finished.
<5>[  618.372959] UBI: attaching mtd6 to ubi2
<5>[  618.376832] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  618.383155] UBI: logical eraseblock size:    126976 bytes
<5>[  618.388690] UBI: smallest flash I/O unit:    2048
<5>[  618.393409] UBI: VID header offset:          2048 (aligned 2048)
<5>[  618.399454] UBI: data offset:                4096
<5>[  618.524191] UBI: max. sequence number:       296
<5>[  618.544492] UBI: attached mtd6 to ubi2
<5>[  618.548259] UBI: MTD device name:            "config"
<5>[  618.553400] UBI: MTD device size:            15 MiB
<5>[  618.558508] UBI: number of good PEBs:        120
<5>[  618.563257] UBI: number of bad PEBs:         0
<5>[  618.567718] UBI: number of corrupted PEBs:   0
<5>[  618.572201] UBI: max. allowed volumes:       128
<5>[  618.576835] UBI: wear-leveling threshold:    4096
<5>[  618.581567] UBI: number of internal volumes: 1
<5>[  618.586089] UBI: number of user volumes:     1
<5>[  618.590573] UBI: available PEBs:             0
<5>[  618.595031] UBI: total number of reserved PEBs: 120
<5>[  618.600060] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  618.606088] UBI: max/mean erase counter: 4/3
<5>[  618.610596] UBI: image sequence number:  1872325126
<5>[  618.618677] UBI: background thread "ubi_bgt2d" started, PID 17040
<5>[  618.766599] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  618.772682] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  618.780306] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  618.787644] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  618.793508] UBIFS: default compressor: lzo
<5>[  618.797621] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  619.008648] UBIFS: un-mount UBI device 2, volume 0
<5>[  619.054936] UBI: mtd6 is detached from ubi2
<5>[22218.306635] UBI: attaching mtd6 to ubi2
<5>[22218.310524] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22218.316809] UBI: logical eraseblock size:    126976 bytes
<5>[22218.322235] UBI: smallest flash I/O unit:    2048
<5>[22218.326952] UBI: VID header offset:          2048 (aligned 2048)
<5>[22218.332989] UBI: data offset:                4096
<5>[22218.441019] UBI: max. sequence number:       297
<5>[22218.456304] UBI: attached mtd6 to ubi2
<5>[22218.460107] UBI: MTD device name:            "config"
<5>[22218.465174] UBI: MTD device size:            15 MiB
<5>[22218.470076] UBI: number of good PEBs:        120
<5>[22218.474705] UBI: number of bad PEBs:         0
<5>[22218.479169] UBI: number of corrupted PEBs:   0
<5>[22218.483624] UBI: max. allowed volumes:       128
<5>[22218.488251] UBI: wear-leveling threshold:    4096
<5>[22218.492975] UBI: number of internal volumes: 1
<5>[22218.497430] UBI: number of user volumes:     1
<5>[22218.501902] UBI: available PEBs:             0
<5>[22218.506357] UBI: total number of reserved PEBs: 120
<5>[22218.511259] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22218.517286] UBI: max/mean erase counter: 4/3
<5>[22218.521586] UBI: image sequence number:  1872325126
<5>[22218.528634] UBI: background thread "ubi_bgt2d" started, PID 14867
<5>[22218.661627] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22218.667659] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22218.675289] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22218.682632] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22218.688480] UBIFS: default compressor: lzo
<5>[22218.692595] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22218.910135] UBIFS: un-mount UBI device 2, volume 0
<5>[22218.988306] UBI: mtd6 is detached from ubi2
<5>[43826.612384] UBI: attaching mtd6 to ubi2
<5>[43826.616251] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[43826.622574] UBI: logical eraseblock size:    126976 bytes
<5>[43826.627988] UBI: smallest flash I/O unit:    2048
<5>[43826.632721] UBI: VID header offset:          2048 (aligned 2048)
<5>[43826.638756] UBI: data offset:                4096
<5>[43826.746494] UBI: max. sequence number:       298
<5>[43826.761836] UBI: attached mtd6 to ubi2
<5>[43826.765604] UBI: MTD device name:            "config"
<5>[43826.770706] UBI: MTD device size:            15 MiB
<5>[43826.775597] UBI: number of good PEBs:        120
<5>[43826.780237] UBI: number of bad PEBs:         0
<5>[43826.784744] UBI: number of corrupted PEBs:   0
<5>[43826.789219] UBI: max. allowed volumes:       128
<5>[43826.793849] UBI: wear-leveling threshold:    4096
<5>[43826.798564] UBI: number of internal volumes: 1
<5>[43826.803031] UBI: number of user volumes:     1
<5>[43826.807486] UBI: available PEBs:             0
<5>[43826.811952] UBI: total number of reserved PEBs: 120
<5>[43826.816842] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[43826.822890] UBI: max/mean erase counter: 4/3
<5>[43826.827177] UBI: image sequence number:  1872325126
<5>[43826.832107] UBI: background thread "ubi_bgt2d" started, PID 19558
<5>[43826.957838] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[43826.963897] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[43826.971511] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[43826.978850] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[43826.984699] UBIFS: default compressor: lzo
<5>[43826.988815] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[43827.190966] UBIFS: un-mount UBI device 2, volume 0
<5>[43827.248825] UBI: mtd6 is detached from ubi2
<6>[50933.093644] EXT4-fs (dm-0): re-mounted. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,noacl,delalloc,acl
<5>[65418.503510] UBI: attaching mtd6 to ubi2
<5>[65418.507362] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[65418.513693] UBI: logical eraseblock size:    126976 bytes
<5>[65418.519123] UBI: smallest flash I/O unit:    2048
<5>[65418.523841] UBI: VID header offset:          2048 (aligned 2048)
<5>[65418.529945] UBI: data offset:                4096
<5>[65418.637773] UBI: max. sequence number:       299
<5>[65418.653112] UBI: attached mtd6 to ubi2
<5>[65418.656878] UBI: MTD device name:            "config"
<5>[65418.661971] UBI: MTD device size:            15 MiB
<5>[65418.666862] UBI: number of good PEBs:        120
<5>[65418.671502] UBI: number of bad PEBs:         0
<5>[65418.675957] UBI: number of corrupted PEBs:   0
<5>[65418.680421] UBI: max. allowed volumes:       128
<5>[65418.685049] UBI: wear-leveling threshold:    4096
<5>[65418.689771] UBI: number of internal volumes: 1
<5>[65418.694230] UBI: number of user volumes:     1
<5>[65418.698693] UBI: available PEBs:             0
<5>[65418.703148] UBI: total number of reserved PEBs: 120
<5>[65418.708043] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[65418.714080] UBI: max/mean erase counter: 4/3
<5>[65418.718361] UBI: image sequence number:  1872325126
<5>[65418.723287] UBI: background thread "ubi_bgt2d" started, PID 8436
<5>[65418.849053] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[65418.855083] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[65418.862707] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[65418.870059] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[65418.875907] UBIFS: default compressor: lzo
<5>[65418.880027] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[65419.086557] UBIFS: un-mount UBI device 2, volume 0
<5>[65419.138736] UBI: mtd6 is detached from ubi2
<5>[87018.576350] UBI: attaching mtd6 to ubi2
<5>[87018.580269] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[87018.586555] UBI: logical eraseblock size:    126976 bytes
<5>[87018.591985] UBI: smallest flash I/O unit:    2048
<5>[87018.596703] UBI: VID header offset:          2048 (aligned 2048)
<5>[87018.602734] UBI: data offset:                4096
<5>[87018.710506] UBI: max. sequence number:       300
<5>[87018.725910] UBI: attached mtd6 to ubi2
<5>[87018.729722] UBI: MTD device name:            "config"
<5>[87018.734795] UBI: MTD device size:            15 MiB
<5>[87018.739718] UBI: number of good PEBs:        120
<5>[87018.744359] UBI: number of bad PEBs:         0
<5>[87018.748840] UBI: number of corrupted PEBs:   0
<5>[87018.753299] UBI: max. allowed volumes:       128
<5>[87018.757935] UBI: wear-leveling threshold:    4096
<5>[87018.762686] UBI: number of internal volumes: 1
<5>[87018.767149] UBI: number of user volumes:     1
<5>[87018.771636] UBI: available PEBs:             0
<5>[87018.776099] UBI: total number of reserved PEBs: 120
<5>[87018.781016] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[87018.787053] UBI: max/mean erase counter: 4/3
<5>[87018.791378] UBI: image sequence number:  1872325126
<5>[87018.796367] UBI: background thread "ubi_bgt2d" started, PID 17542
<5>[87018.927635] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[87018.933704] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[87018.941308] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[87018.948651] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[87018.954506] UBIFS: default compressor: lzo
<5>[87018.958623] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[87019.159153] UBIFS: un-mount UBI device 2, volume 0
<5>[87019.214846] UBI: mtd6 is detached from ubi2
<5>[108618.651406] UBI: attaching mtd6 to ubi2
<5>[108618.655346] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[108618.661768] UBI: logical eraseblock size:    126976 bytes
<5>[108618.667286] UBI: smallest flash I/O unit:    2048
<5>[108618.672119] UBI: VID header offset:          2048 (aligned 2048)
<5>[108618.678237] UBI: data offset:                4096
<5>[108618.786052] UBI: max. sequence number:       301
<5>[108618.801419] UBI: attached mtd6 to ubi2
<5>[108618.805274] UBI: MTD device name:            "config"
<5>[108618.810452] UBI: MTD device size:            15 MiB
<5>[108618.815429] UBI: number of good PEBs:        120
<5>[108618.820152] UBI: number of bad PEBs:         0
<5>[108618.824692] UBI: number of corrupted PEBs:   0
<5>[108618.829238] UBI: max. allowed volumes:       128
<5>[108618.833953] UBI: wear-leveling threshold:    4096
<5>[108618.838767] UBI: number of internal volumes: 1
<5>[108618.843307] UBI: number of user volumes:     1
<5>[108618.847854] UBI: available PEBs:             0
<5>[108618.852406] UBI: total number of reserved PEBs: 120
<5>[108618.857382] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[108618.863501] UBI: max/mean erase counter: 4/3
<5>[108618.867868] UBI: image sequence number:  1872325126
<5>[108618.872921] UBI: background thread "ubi_bgt2d" started, PID 30109
<5>[108619.001459] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[108619.007576] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[108619.015275] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[108619.022700] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[108619.028640] UBIFS: default compressor: lzo
<5>[108619.032835] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[108621.053641] UBIFS: un-mount UBI device 2, volume 0
<5>[108622.779358] UBI: mtd6 is detached from ubi2
<5>[130219.945477] UBI: attaching mtd6 to ubi2
<5>[130219.949812] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[130219.956629] UBI: logical eraseblock size:    126976 bytes
<5>[130219.962591] UBI: smallest flash I/O unit:    2048
<5>[130219.967944] UBI: VID header offset:          2048 (aligned 2048)
<5>[130219.974640] UBI: data offset:                4096
<5>[130220.108414] UBI: max. sequence number:       302
<5>[130220.135744] UBI: attached mtd6 to ubi2
<5>[130220.140102] UBI: MTD device name:            "config"
<5>[130220.145751] UBI: MTD device size:            15 MiB
<5>[130220.151205] UBI: number of good PEBs:        120
<5>[130220.156308] UBI: number of bad PEBs:         0
<5>[130220.161246] UBI: number of corrupted PEBs:   0
<5>[130220.166198] UBI: max. allowed volumes:       128
<5>[130220.171377] UBI: wear-leveling threshold:    4096
<5>[130220.176477] UBI: number of internal volumes: 1
<5>[130220.181356] UBI: number of user volumes:     1
<5>[130220.186366] UBI: available PEBs:             0
<5>[130220.191331] UBI: total number of reserved PEBs: 120
<5>[130220.196533] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[130220.202866] UBI: max/mean erase counter: 4/3
<5>[130220.207406] UBI: image sequence number:  1872325126
<5>[130220.213463] UBI: background thread "ubi_bgt2d" started, PID 12399
<5>[130220.439369] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[130220.445824] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[130220.453646] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[130220.461100] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[130220.467042] UBIFS: default compressor: lzo
<5>[130220.471292] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[130222.623407] UBIFS: un-mount UBI device 2, volume 0
<5>[130222.685353] UBI: mtd6 is detached from ubi2
<5>[151819.257397] UBI: attaching mtd6 to ubi2
<5>[151819.261374] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[151819.267745] UBI: logical eraseblock size:    126976 bytes
<5>[151819.273265] UBI: smallest flash I/O unit:    2048
<5>[151819.278069] UBI: VID header offset:          2048 (aligned 2048)
<5>[151819.284185] UBI: data offset:                4096
<5>[151819.391986] UBI: max. sequence number:       303
<5>[151819.407354] UBI: attached mtd6 to ubi2
<5>[151819.411240] UBI: MTD device name:            "config"
<5>[151819.416394] UBI: MTD device size:            15 MiB
<5>[151819.421382] UBI: number of good PEBs:        120
<5>[151819.426099] UBI: number of bad PEBs:         0
<5>[151819.430647] UBI: number of corrupted PEBs:   0
<5>[151819.435188] UBI: max. allowed volumes:       128
<5>[151819.439911] UBI: wear-leveling threshold:    4096
<5>[151819.444713] UBI: number of internal volumes: 1
<5>[151819.449262] UBI: number of user volumes:     1
<5>[151819.453803] UBI: available PEBs:             0
<5>[151819.458343] UBI: total number of reserved PEBs: 120
<5>[151819.463326] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[151819.469442] UBI: max/mean erase counter: 4/3
<5>[151819.473809] UBI: image sequence number:  1872325126
<5>[151819.478821] UBI: background thread "ubi_bgt2d" started, PID 22938
<5>[151819.604797] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[151819.610947] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[151819.618650] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[151819.626074] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[151819.632035] UBIFS: default compressor: lzo
<5>[151819.636230] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[151819.841423] UBIFS: un-mount UBI device 2, volume 0
<5>[151819.888342] UBI: mtd6 is detached from ubi2
<5>[173419.331040] UBI: attaching mtd6 to ubi2
<5>[173419.334980] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[173419.341385] UBI: logical eraseblock size:    126976 bytes
<5>[173419.346887] UBI: smallest flash I/O unit:    2048
<5>[173419.351704] UBI: VID header offset:          2048 (aligned 2048)
<5>[173419.357813] UBI: data offset:                4096
<5>[173419.466004] UBI: max. sequence number:       304
<5>[173419.481384] UBI: attached mtd6 to ubi2
<5>[173419.485239] UBI: MTD device name:            "config"
<5>[173419.490426] UBI: MTD device size:            15 MiB
<5>[173419.495404] UBI: number of good PEBs:        120
<5>[173419.500211] UBI: number of bad PEBs:         0
<5>[173419.504789] UBI: number of corrupted PEBs:   0
<5>[173419.509363] UBI: max. allowed volumes:       128
<5>[173419.514081] UBI: wear-leveling threshold:    4096
<5>[173419.518895] UBI: number of internal volumes: 1
<5>[173419.523437] UBI: number of user volumes:     1
<5>[173419.527977] UBI: available PEBs:             0
<5>[173419.532536] UBI: total number of reserved PEBs: 120
<5>[173419.537514] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[173419.543638] UBI: max/mean erase counter: 4/3
<5>[173419.548006] UBI: image sequence number:  1872325126
<5>[173419.553041] UBI: background thread "ubi_bgt2d" started, PID 31793
<5>[173419.681202] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[173419.687319] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[173419.695018] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[173419.702450] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[173419.708392] UBIFS: default compressor: lzo
<5>[173419.712596] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[173419.918026] UBIFS: un-mount UBI device 2, volume 0
<5>[173419.998818] UBI: mtd6 is detached from ubi2
<5>[195019.409446] UBI: attaching mtd6 to ubi2
<5>[195019.413387] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[195019.419785] UBI: logical eraseblock size:    126976 bytes
<5>[195019.425288] UBI: smallest flash I/O unit:    2048
<5>[195019.430103] UBI: VID header offset:          2048 (aligned 2048)
<5>[195019.436213] UBI: data offset:                4096
<5>[195019.544000] UBI: max. sequence number:       305
<5>[195019.559394] UBI: attached mtd6 to ubi2
<5>[195019.563248] UBI: MTD device name:            "config"
<5>[195019.568401] UBI: MTD device size:            15 MiB
<5>[195019.573409] UBI: number of good PEBs:        120
<5>[195019.578125] UBI: number of bad PEBs:         0
<5>[195019.582677] UBI: number of corrupted PEBs:   0
<5>[195019.587219] UBI: max. allowed volumes:       128
<5>[195019.591941] UBI: wear-leveling threshold:    4096
<5>[195019.596744] UBI: number of internal volumes: 1
<5>[195019.601291] UBI: number of user volumes:     1
<5>[195019.605833] UBI: available PEBs:             0
<5>[195019.610380] UBI: total number of reserved PEBs: 120
<5>[195019.615358] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[195019.621473] UBI: max/mean erase counter: 4/3
<5>[195019.625841] UBI: image sequence number:  1872325126
<5>[195019.630856] UBI: background thread "ubi_bgt2d" started, PID 30553
<5>[195019.755988] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[195019.762145] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[195019.769861] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[195019.777283] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[195019.783236] UBIFS: default compressor: lzo
<5>[195019.787441] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[195020.001780] UBIFS: un-mount UBI device 2, volume 0
<5>[195020.064821] UBI: mtd6 is detached from ubi2
<5>[216619.486483] UBI: attaching mtd6 to ubi2
<5>[216619.490489] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[216619.496893] UBI: logical eraseblock size:    126976 bytes
<5>[216619.502443] UBI: smallest flash I/O unit:    2048
<5>[216619.507288] UBI: VID header offset:          2048 (aligned 2048)
<5>[216619.513430] UBI: data offset:                4096
<5>[216619.621544] UBI: max. sequence number:       306
<5>[216619.636924] UBI: attached mtd6 to ubi2
<5>[216619.640821] UBI: MTD device name:            "config"
<5>[216619.645975] UBI: MTD device size:            15 MiB
<5>[216619.650982] UBI: number of good PEBs:        120
<5>[216619.655699] UBI: number of bad PEBs:         0
<5>[216619.660253] UBI: number of corrupted PEBs:   0
<5>[216619.664796] UBI: max. allowed volumes:       128
<5>[216619.669522] UBI: wear-leveling threshold:    4096
<5>[216619.674366] UBI: number of internal volumes: 1
<5>[216619.678927] UBI: number of user volumes:     1
<5>[216619.683469] UBI: available PEBs:             0
<5>[216619.688010] UBI: total number of reserved PEBs: 120
<5>[216619.692999] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[216619.699117] UBI: max/mean erase counter: 4/3
<5>[216619.703484] UBI: image sequence number:  1872325126
<5>[216619.708475] UBI: background thread "ubi_bgt2d" started, PID 7122
<5>[216619.836838] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[216619.842978] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[216619.850671] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[216619.858087] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[216619.864034] UBIFS: default compressor: lzo
<5>[216619.868229] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[216620.071356] UBIFS: un-mount UBI device 2, volume 0
<5>[216620.144815] UBI: mtd6 is detached from ubi2
<5>[238219.550148] UBI: attaching mtd6 to ubi2
<5>[238219.554088] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[238219.560493] UBI: logical eraseblock size:    126976 bytes
<5>[238219.565994] UBI: smallest flash I/O unit:    2048
<5>[238219.570805] UBI: VID header offset:          2048 (aligned 2048)
<5>[238219.576914] UBI: data offset:                4096
<5>[238219.684727] UBI: max. sequence number:       307
<5>[238219.700111] UBI: attached mtd6 to ubi2
<5>[238219.703964] UBI: MTD device name:            "config"
<5>[238219.709138] UBI: MTD device size:            15 MiB
<5>[238219.714116] UBI: number of good PEBs:        120
<5>[238219.718849] UBI: number of bad PEBs:         0
<5>[238219.723392] UBI: number of corrupted PEBs:   0
<5>[238219.727933] UBI: max. allowed volumes:       128
<5>[238219.732660] UBI: wear-leveling threshold:    4096
<5>[238219.737464] UBI: number of internal volumes: 1
<5>[238219.742012] UBI: number of user volumes:     1
<5>[238219.746553] UBI: available PEBs:             0
<5>[238219.751107] UBI: total number of reserved PEBs: 120
<5>[238219.756084] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[238219.762202] UBI: max/mean erase counter: 4/3
<5>[238219.766570] UBI: image sequence number:  1872325126
<5>[238219.771601] UBI: background thread "ubi_bgt2d" started, PID 16302
<5>[238219.906359] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[238219.912499] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[238219.920194] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[238219.927611] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[238219.933562] UBIFS: default compressor: lzo
<5>[238219.937757] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[238220.139133] UBIFS: un-mount UBI device 2, volume 0
<5>[238220.244801] UBI: mtd6 is detached from ubi2
<5>[259819.626422] UBI: attaching mtd6 to ubi2
<5>[259819.630394] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[259819.636767] UBI: logical eraseblock size:    126976 bytes
<5>[259819.642294] UBI: smallest flash I/O unit:    2048
<5>[259819.647099] UBI: VID header offset:          2048 (aligned 2048)
<5>[259819.653221] UBI: data offset:                4096
<5>[259819.761773] UBI: max. sequence number:       308
<5>[259819.777247] UBI: attached mtd6 to ubi2
<5>[259819.781135] UBI: MTD device name:            "config"
<5>[259819.786289] UBI: MTD device size:            15 MiB
<5>[259819.791279] UBI: number of good PEBs:        120
<5>[259819.796000] UBI: number of bad PEBs:         0
<5>[259819.800549] UBI: number of corrupted PEBs:   0
<5>[259819.805091] UBI: max. allowed volumes:       128
<5>[259819.809813] UBI: wear-leveling threshold:    4096
<5>[259819.814616] UBI: number of internal volumes: 1
<5>[259819.819163] UBI: number of user volumes:     1
<5>[259819.823703] UBI: available PEBs:             0
<5>[259819.828244] UBI: total number of reserved PEBs: 120
<5>[259819.833227] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[259819.839343] UBI: max/mean erase counter: 4/3
<5>[259819.843711] UBI: image sequence number:  1872325126
<5>[259819.848724] UBI: background thread "ubi_bgt2d" started, PID 25147
<5>[259819.973987] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[259819.980138] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[259819.987818] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[259819.995249] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[259820.001199] UBIFS: default compressor: lzo
<5>[259820.005392] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[259820.216571] UBIFS: un-mount UBI device 2, volume 0
<5>[259820.278292] UBI: mtd6 is detached from ubi2
<4>[264157.263717] rule type=2, num=1
<4>[270552.726191] rule type=2, num=0
<4>[270805.781061] rule type=2, num=1
<4>[270989.735173] rule type=2, num=0
<4>[271044.349354] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[271044.357339] NFSD: starting 90-second grace period
<3>[271198.470610] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<3>[271271.122253] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<3>[271271.293769] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<3>[271358.965093] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<3>[271359.121344] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeablerule type=2, num=1
<4>[271520.789549] rule type=2, num=0
<3>[272007.067411] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<3>[272035.303923] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
<5>[281419.881180] UBI: attaching mtd6 to ubi2
<5>[281419.885316] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[281419.891724] UBI: logical eraseblock size:    126976 bytes
<5>[281419.897235] UBI: smallest flash I/O unit:    2048
<5>[281419.902058] UBI: VID header offset:          2048 (aligned 2048)
<5>[281419.908168] UBI: data offset:                4096
<5>[281420.016588] UBI: max. sequence number:       311
<5>[281420.031997] UBI: attached mtd6 to ubi2
<5>[281420.035850] UBI: MTD device name:            "config"
<5>[281420.041025] UBI: MTD device size:            15 MiB
<5>[281420.046002] UBI: number of good PEBs:        120
<5>[281420.050728] UBI: number of bad PEBs:         0
<5>[281420.055269] UBI: number of corrupted PEBs:   0
<5>[281420.059824] UBI: max. allowed volumes:       128
<5>[281420.064574] UBI: wear-leveling threshold:    4096
<5>[281420.069390] UBI: number of internal volumes: 1
<5>[281420.073932] UBI: number of user volumes:     1
<5>[281420.078473] UBI: available PEBs:             0
<5>[281420.083036] UBI: total number of reserved PEBs: 120
<5>[281420.088013] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[281420.094140] UBI: max/mean erase counter: 4/3
<5>[281420.098513] UBI: image sequence number:  1872325126
<5>[281420.103555] UBI: background thread "ubi_bgt2d" started, PID 28340
<5>[281420.229719] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[281420.235834] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[281420.243542] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[281420.250988] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[281420.256932] UBIFS: default compressor: lzo
<5>[281420.261167] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[281420.467316] UBIFS: un-mount UBI device 2, volume 0
<5>[281420.514978] UBI: mtd6 is detached from ubi2
<5>[303019.958226] UBI: attaching mtd6 to ubi2
<5>[303019.962204] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[303019.968577] UBI: logical eraseblock size:    126976 bytes
<5>[303019.974100] UBI: smallest flash I/O unit:    2048
<5>[303019.978917] UBI: VID header offset:          2048 (aligned 2048)
<5>[303019.985033] UBI: data offset:                4096
<5>[303020.093461] UBI: max. sequence number:       312
<5>[303020.108845] UBI: attached mtd6 to ubi2
<5>[303020.112699] UBI: MTD device name:            "config"
<5>[303020.117852] UBI: MTD device size:            15 MiB
<5>[303020.122852] UBI: number of good PEBs:        120
<5>[303020.127568] UBI: number of bad PEBs:         0
<5>[303020.132119] UBI: number of corrupted PEBs:   0
<5>[303020.136662] UBI: max. allowed volumes:       128
<5>[303020.141385] UBI: wear-leveling threshold:    4096
<5>[303020.146188] UBI: number of internal volumes: 1
<5>[303020.150736] UBI: number of user volumes:     1
<5>[303020.155277] UBI: available PEBs:             0
<5>[303020.159827] UBI: total number of reserved PEBs: 120
<5>[303020.164804] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[303020.170921] UBI: max/mean erase counter: 4/3
<5>[303020.175289] UBI: image sequence number:  1872325126
<5>[303020.180300] UBI: background thread "ubi_bgt2d" started, PID 4960
<5>[303020.306065] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[303020.312208] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[303020.319896] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[303020.327312] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[303020.333256] UBIFS: default compressor: lzo
<5>[303020.337451] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[303020.539609] UBIFS: un-mount UBI device 2, volume 0
<5>[303020.589322] UBI: mtd6 is detached from ubi2
<5>[324620.032107] UBI: attaching mtd6 to ubi2
<5>[324620.036059] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[324620.042477] UBI: logical eraseblock size:    126976 bytes
<5>[324620.047984] UBI: smallest flash I/O unit:    2048
<5>[324620.052802] UBI: VID header offset:          2048 (aligned 2048)
<5>[324620.058915] UBI: data offset:                4096
<5>[324620.166692] UBI: max. sequence number:       313
<5>[324620.182076] UBI: attached mtd6 to ubi2
<5>[324620.185930] UBI: MTD device name:            "config"
<5>[324620.191105] UBI: MTD device size:            15 MiB
<5>[324620.196084] UBI: number of good PEBs:        120
<5>[324620.200809] UBI: number of bad PEBs:         0
<5>[324620.205351] UBI: number of corrupted PEBs:   0
<5>[324620.209902] UBI: max. allowed volumes:       128
<5>[324620.214619] UBI: wear-leveling threshold:    4096
<5>[324620.219436] UBI: number of internal volumes: 1
<5>[324620.223978] UBI: number of user volumes:     1
<5>[324620.228519] UBI: available PEBs:             0
<5>[324620.233073] UBI: total number of reserved PEBs: 120
<5>[324620.238052] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[324620.244168] UBI: max/mean erase counter: 4/3
<5>[324620.248536] UBI: image sequence number:  1872325126
<5>[324620.253554] UBI: background thread "ubi_bgt2d" started, PID 14113
<5>[324620.379799] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[324620.385942] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[324620.393676] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[324620.401125] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[324620.407075] UBIFS: default compressor: lzo
<5>[324620.411294] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[324620.623143] UBIFS: un-mount UBI device 2, volume 0
<5>[324620.684931] UBI: mtd6 is detached from ubi2
<5>[346220.103989] UBI: attaching mtd6 to ubi2
<5>[346220.107928] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[346220.114343] UBI: logical eraseblock size:    126976 bytes
<5>[346220.119892] UBI: smallest flash I/O unit:    2048
<5>[346220.124696] UBI: VID header offset:          2048 (aligned 2048)
<5>[346220.130821] UBI: data offset:                4096
<5>[346220.239809] UBI: max. sequence number:       314
<5>[346220.255203] UBI: attached mtd6 to ubi2
<5>[346220.259099] UBI: MTD device name:            "config"
<5>[346220.264254] UBI: MTD device size:            15 MiB
<5>[346220.269248] UBI: number of good PEBs:        120
<5>[346220.273969] UBI: number of bad PEBs:         0
<5>[346220.278510] UBI: number of corrupted PEBs:   0
<5>[346220.283063] UBI: max. allowed volumes:       128
<5>[346220.287779] UBI: wear-leveling threshold:    4096
<5>[346220.292633] UBI: number of internal volumes: 1
<5>[346220.297183] UBI: number of user volumes:     1
<5>[346220.301764] UBI: available PEBs:             0
<5>[346220.306357] UBI: total number of reserved PEBs: 120
<5>[346220.311375] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[346220.317598] UBI: max/mean erase counter: 4/3
<5>[346220.322071] UBI: image sequence number:  1872325126
<5>[346220.327065] UBI: background thread "ubi_bgt2d" started, PID 23611
<5>[346220.452791] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[346220.458949] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[346220.466629] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[346220.474068] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[346220.480013] UBIFS: default compressor: lzo
<5>[346220.484208] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[346220.688235] UBIFS: un-mount UBI device 2, volume 0
<5>[346220.748264] UBI: mtd6 is detached from ubi2
<5>[367820.174590] UBI: attaching mtd6 to ubi2
<5>[367820.178547] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[367820.184984] UBI: logical eraseblock size:    126976 bytes
<5>[367820.190530] UBI: smallest flash I/O unit:    2048
<5>[367820.195342] UBI: VID header offset:          2048 (aligned 2048)
<5>[367820.201488] UBI: data offset:                4096
<5>[367820.309285] UBI: max. sequence number:       315
<5>[367820.324705] UBI: attached mtd6 to ubi2
<5>[367820.328558] UBI: MTD device name:            "config"
<5>[367820.333749] UBI: MTD device size:            15 MiB
<5>[367820.338747] UBI: number of good PEBs:        120
<5>[367820.343468] UBI: number of bad PEBs:         0
<5>[367820.348010] UBI: number of corrupted PEBs:   0
<5>[367820.352558] UBI: max. allowed volumes:       128
<5>[367820.357286] UBI: wear-leveling threshold:    4096
<5>[367820.362098] UBI: number of internal volumes: 1
<5>[367820.366640] UBI: number of user volumes:     1
<5>[367820.371190] UBI: available PEBs:             0
<5>[367820.375731] UBI: total number of reserved PEBs: 120
<5>[367820.380715] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[367820.386837] UBI: max/mean erase counter: 4/3
<5>[367820.391222] UBI: image sequence number:  1872325126
<5>[367820.396210] UBI: background thread "ubi_bgt2d" started, PID 1602
<5>[367820.527930] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[367820.534078] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[367820.541777] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[367820.549208] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[367820.555144] UBIFS: default compressor: lzo
<5>[367820.559348] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[367820.762036] UBIFS: un-mount UBI device 2, volume 0
<5>[367820.825009] UBI: mtd6 is detached from ubi2
<5>[389420.267602] UBI: attaching mtd6 to ubi2
<5>[389420.271582] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[389420.277972] UBI: logical eraseblock size:    126976 bytes
<5>[389420.283483] UBI: smallest flash I/O unit:    2048
<5>[389420.288292] UBI: VID header offset:          2048 (aligned 2048)
<5>[389420.294412] UBI: data offset:                4096
<5>[389420.402252] UBI: max. sequence number:       316
<5>[389420.417617] UBI: attached mtd6 to ubi2
<5>[389420.421506] UBI: MTD device name:            "config"
<5>[389420.426659] UBI: MTD device size:            15 MiB
<5>[389420.431664] UBI: number of good PEBs:        120
<5>[389420.436386] UBI: number of bad PEBs:         0
<5>[389420.440959] UBI: number of corrupted PEBs:   0
<5>[389420.445507] UBI: max. allowed volumes:       128
<5>[389420.450249] UBI: wear-leveling threshold:    4096
<5>[389420.455060] UBI: number of internal volumes: 1
<5>[389420.459622] UBI: number of user volumes:     1
<5>[389420.464163] UBI: available PEBs:             0
<5>[389420.468717] UBI: total number of reserved PEBs: 120
<5>[389420.473695] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[389420.479814] UBI: max/mean erase counter: 4/3
<5>[389420.484182] UBI: image sequence number:  1872325126
<5>[389420.489198] UBI: background thread "ubi_bgt2d" started, PID 26266
<5>[389420.614885] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[389420.621034] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[389420.628738] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[389420.636157] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[389420.642101] UBIFS: default compressor: lzo
<5>[389420.646295] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[389420.865958] UBIFS: un-mount UBI device 2, volume 0
<5>[389420.918026] UBI: mtd6 is detached from ubi2
<5>[411020.325601] UBI: attaching mtd6 to ubi2
<5>[411020.329575] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[411020.335946] UBI: logical eraseblock size:    126976 bytes
<5>[411020.341457] UBI: smallest flash I/O unit:    2048
<5>[411020.346260] UBI: VID header offset:          2048 (aligned 2048)
<5>[411020.352376] UBI: data offset:                4096
<5>[411020.460417] UBI: max. sequence number:       317
<5>[411020.475766] UBI: attached mtd6 to ubi2
<5>[411020.479649] UBI: MTD device name:            "config"
<5>[411020.484803] UBI: MTD device size:            15 MiB
<5>[411020.489791] UBI: number of good PEBs:        120
<5>[411020.494507] UBI: number of bad PEBs:         0
<5>[411020.499056] UBI: number of corrupted PEBs:   0
<5>[411020.503598] UBI: max. allowed volumes:       128
<5>[411020.508313] UBI: wear-leveling threshold:    4096
<5>[411020.513124] UBI: number of internal volumes: 1
<5>[411020.517665] UBI: number of user volumes:     1
<5>[411020.522214] UBI: available PEBs:             0
<5>[411020.526756] UBI: total number of reserved PEBs: 120
<5>[411020.531738] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[411020.537848] UBI: max/mean erase counter: 4/3
<5>[411020.542222] UBI: image sequence number:  1872325126
<5>[411020.547213] UBI: background thread "ubi_bgt2d" started, PID 17674
<5>[411020.676580] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[411020.682734] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[411020.690425] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[411020.697846] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[411020.703811] UBIFS: default compressor: lzo
<5>[411020.708007] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[411020.915860] UBIFS: un-mount UBI device 2, volume 0
<5>[411020.964975] UBI: mtd6 is detached from ubi2
<5>[432620.397028] UBI: attaching mtd6 to ubi2
<5>[432620.401009] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[432620.407389] UBI: logical eraseblock size:    126976 bytes
<5>[432620.412901] UBI: smallest flash I/O unit:    2048
<5>[432620.417709] UBI: VID header offset:          2048 (aligned 2048)
<5>[432620.423834] UBI: data offset:                4096
<5>[432620.531633] UBI: max. sequence number:       318
<5>[432620.547074] UBI: attached mtd6 to ubi2
<5>[432620.550967] UBI: MTD device name:            "config"
<5>[432620.556124] UBI: MTD device size:            15 MiB
<5>[432620.561123] UBI: number of good PEBs:        120
<5>[432620.565843] UBI: number of bad PEBs:         0
<5>[432620.570398] UBI: number of corrupted PEBs:   0
<5>[432620.574940] UBI: max. allowed volumes:       128
<5>[432620.579663] UBI: wear-leveling threshold:    4096
<5>[432620.584465] UBI: number of internal volumes: 1
<5>[432620.589012] UBI: number of user volumes:     1
<5>[432620.593553] UBI: available PEBs:             0
<5>[432620.598095] UBI: total number of reserved PEBs: 120
<5>[432620.603077] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[432620.609194] UBI: max/mean erase counter: 4/3
<5>[432620.613561] UBI: image sequence number:  1872325126
<5>[432620.618550] UBI: background thread "ubi_bgt2d" started, PID 8850
<5>[432620.747676] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[432620.753822] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[432620.761516] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[432620.768948] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[432620.774890] UBIFS: default compressor: lzo
<5>[432620.779113] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[432620.981150] UBIFS: un-mount UBI device 2, volume 0
<5>[432621.048930] UBI: mtd6 is detached from ubi2
<5>[454220.511939] UBI: attaching mtd6 to ubi2
<5>[454220.515878] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[454220.522291] UBI: logical eraseblock size:    126976 bytes
<5>[454220.527806] UBI: smallest flash I/O unit:    2048
<5>[454220.532623] UBI: VID header offset:          2048 (aligned 2048)
<5>[454220.538744] UBI: data offset:                4096
<5>[454220.647185] UBI: max. sequence number:       319
<5>[454220.662688] UBI: attached mtd6 to ubi2
<5>[454220.666543] UBI: MTD device name:            "config"
<5>[454220.671722] UBI: MTD device size:            15 MiB
<5>[454220.676699] UBI: number of good PEBs:        120
<5>[454220.681425] UBI: number of bad PEBs:         0
<5>[454220.685966] UBI: number of corrupted PEBs:   0
<5>[454220.690515] UBI: max. allowed volumes:       128
<5>[454220.695231] UBI: wear-leveling threshold:    4096
<5>[454220.700041] UBI: number of internal volumes: 1
<5>[454220.704584] UBI: number of user volumes:     1
<5>[454220.709134] UBI: available PEBs:             0
<5>[454220.713676] UBI: total number of reserved PEBs: 120
<5>[454220.718661] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[454220.724770] UBI: max/mean erase counter: 4/3
<5>[454220.729144] UBI: image sequence number:  1872325126
<5>[454220.734135] UBI: background thread "ubi_bgt2d" started, PID 534
<5>[454220.866160] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[454220.872298] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[454220.879989] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[454220.887411] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[454220.893356] UBIFS: default compressor: lzo
<5>[454220.897551] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[454221.099156] UBIFS: un-mount UBI device 2, volume 0
<5>[454221.164894] UBI: mtd6 is detached from ubi2
<5>[475820.577314] UBI: attaching mtd6 to ubi2
<5>[475820.581321] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[475820.587709] UBI: logical eraseblock size:    126976 bytes
<5>[475820.593249] UBI: smallest flash I/O unit:    2048
<5>[475820.598056] UBI: VID header offset:          2048 (aligned 2048)
<5>[475820.604181] UBI: data offset:                4096
<5>[475820.712042] UBI: max. sequence number:       320
<5>[475820.727443] UBI: attached mtd6 to ubi2
<5>[475820.731354] UBI: MTD device name:            "config"
<5>[475820.736514] UBI: MTD device size:            15 MiB
<5>[475820.741500] UBI: number of good PEBs:        120
<5>[475820.746216] UBI: number of bad PEBs:         0
<5>[475820.750770] UBI: number of corrupted PEBs:   0
<5>[475820.755311] UBI: max. allowed volumes:       128
<5>[475820.760034] UBI: wear-leveling threshold:    4096
<5>[475820.764838] UBI: number of internal volumes: 1
<5>[475820.769387] UBI: number of user volumes:     1
<5>[475820.773928] UBI: available PEBs:             0
<5>[475820.778468] UBI: total number of reserved PEBs: 120
<5>[475820.783456] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[475820.789573] UBI: max/mean erase counter: 4/3
<5>[475820.793942] UBI: image sequence number:  1872325126
<5>[475820.798952] UBI: background thread "ubi_bgt2d" started, PID 24098
<5>[475820.924778] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[475820.930917] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[475820.938608] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[475820.946026] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[475820.951972] UBIFS: default compressor: lzo
<5>[475820.956167] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[475821.163418] UBIFS: un-mount UBI device 2, volume 0
<5>[475821.226609] UBI: mtd6 is detached from ubi2
<5>[497420.664229] UBI: attaching mtd6 to ubi2
<5>[497420.668169] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[497420.674580] UBI: logical eraseblock size:    126976 bytes
<5>[497420.680096] UBI: smallest flash I/O unit:    2048
<5>[497420.684900] UBI: VID header offset:          2048 (aligned 2048)
<5>[497420.691014] UBI: data offset:                4096
<5>[497420.798812] UBI: max. sequence number:       321
<5>[497420.814189] UBI: attached mtd6 to ubi2
<5>[497420.818043] UBI: MTD device name:            "config"
<5>[497420.823224] UBI: MTD device size:            15 MiB
<5>[497420.828202] UBI: number of good PEBs:        120
<5>[497420.832928] UBI: number of bad PEBs:         0
<5>[497420.837470] UBI: number of corrupted PEBs:   0
<5>[497420.842019] UBI: max. allowed volumes:       128
<5>[497420.846734] UBI: wear-leveling threshold:    4096
<5>[497420.851558] UBI: number of internal volumes: 1
<5>[497420.856107] UBI: number of user volumes:     1
<5>[497420.860688] UBI: available PEBs:             0
<5>[497420.865243] UBI: total number of reserved PEBs: 120
<5>[497420.870235] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[497420.876344] UBI: max/mean erase counter: 4/3
<5>[497420.880719] UBI: image sequence number:  1872325126
<5>[497420.885708] UBI: background thread "ubi_bgt2d" started, PID 15062
<5>[497421.009605] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[497421.015721] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[497421.023432] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[497421.030873] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[497421.036809] UBIFS: default compressor: lzo
<5>[497421.041013] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[497421.244507] UBIFS: un-mount UBI device 2, volume 0
<5>[497421.310047] UBI: mtd6 is detached from ubi2
<5>[519020.762429] UBI: attaching mtd6 to ubi2
<5>[519020.766388] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[519020.772807] UBI: logical eraseblock size:    126976 bytes
<5>[519020.778317] UBI: smallest flash I/O unit:    2048
<5>[519020.783147] UBI: VID header offset:          2048 (aligned 2048)
<5>[519020.789265] UBI: data offset:                4096
<5>[519020.905125] UBI: max. sequence number:       322
<5>[519020.920541] UBI: attached mtd6 to ubi2
<5>[519020.924394] UBI: MTD device name:            "config"
<5>[519020.929572] UBI: MTD device size:            15 MiB
<5>[519020.934556] UBI: number of good PEBs:        120
<5>[519020.939290] UBI: number of bad PEBs:         0
<5>[519020.943832] UBI: number of corrupted PEBs:   0
<5>[519020.948372] UBI: max. allowed volumes:       128
<5>[519020.953097] UBI: wear-leveling threshold:    4096
<5>[519020.957900] UBI: number of internal volumes: 1
<5>[519020.962450] UBI: number of user volumes:     1
<5>[519020.966991] UBI: available PEBs:             0
<5>[519020.971540] UBI: total number of reserved PEBs: 120
<5>[519020.976518] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[519020.982636] UBI: max/mean erase counter: 4/3
<5>[519020.987003] UBI: image sequence number:  1872325126
<5>[519020.992011] UBI: background thread "ubi_bgt2d" started, PID 6191
<5>[519021.117887] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[519021.124041] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[519021.131746] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[519021.139177] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[519021.145113] UBIFS: default compressor: lzo
<5>[519021.149317] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[519021.380515] UBIFS: un-mount UBI device 2, volume 0
<5>[519021.425079] UBI: mtd6 is detached from ubi2
<5>[527297.166405] UBI: attaching mtd5 to ubi1
<5>[527297.170376] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[527297.176755] UBI: logical eraseblock size:    126976 bytes
<5>[527297.182271] UBI: smallest flash I/O unit:    2048
<5>[527297.187076] UBI: VID header offset:          2048 (aligned 2048)
<5>[527297.193194] UBI: data offset:                4096
<5>[527297.945030] UBI: empty MTD device detected
<5>[527297.949512] UBI: max. sequence number:       0
<5>[527297.954125] UBI: create volume table (copy #1)
<5>[527297.971200] UBI: create volume table (copy #2)
<5>[527297.989941] UBI: attached mtd5 to ubi1
<5>[527297.993794] UBI: MTD device name:            "boot2_rootfs2"
<5>[527297.999687] UBI: MTD device size:            216 MiB
<5>[527298.004754] UBI: number of good PEBs:        1728
<5>[527298.009757] UBI: number of bad PEBs:         0
<5>[527298.014443] UBI: number of corrupted PEBs:   0
<5>[527298.019190] UBI: max. allowed volumes:       128
<5>[527298.023912] UBI: wear-leveling threshold:    4096
<5>[527298.028742] UBI: number of internal volumes: 1
<5>[527298.033285] UBI: number of user volumes:     0
<5>[527298.037825] UBI: available PEBs:             1707
<5>[527298.042710] UBI: total number of reserved PEBs: 21
<5>[527298.047602] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[527298.053816] UBI: max/mean erase counter: 0/0
<5>[527298.058185] UBI: image sequence number:  -1365772676
<5>[527298.063300] UBI: background thread "ubi_bgt1d" started, PID 22194
<5>[527302.663937] UBIFS: default file-system created
<5>[527302.757862] UBIFS: mounted UBI device 1, volume 0, name "tmp"
<5>[527302.763747] UBIFS: file system size:   215351296 bytes (210304 KiB, 205 MiB, 1696 LEBs)
<5>[527302.771973] UBIFS: journal size:       10792960 bytes (10540 KiB, 10 MiB, 85 LEBs)
<5>[527302.779673] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[527302.785610] UBIFS: default compressor: lzo
<5>[527302.789895] UBIFS: reserved for root:  4952683 bytes (4836 KiB)
<5>[527530.055415] UBIFS: un-mount UBI device 1, volume 0
<5>[527530.146448] UBI: mtd5 is detached from ubi1
<4>[528027.086644] nfsd: last server has exited, flushing export cache
<6>[528077.084876] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[528077.184544] eth0: pfe_eth_close
<6>[528077.218609] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[528077.228126] hif_process_client_req: unregister client_id 1
<6>[528077.233724] pfe_hif_client_unregister
<6>[528077.298889] eth1: pfe_eth_close
<6>[528077.338616] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[528077.348131] hif_process_client_req: unregister client_id 0
<6>[528077.353738] pfe_hif_client_unregister
<5>[528093.838403] UBI: attaching mtd6 to ubi2
<5>[528093.842371] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[528093.848768] UBI: logical eraseblock size:    126976 bytes
<5>[528093.854268] UBI: smallest flash I/O unit:    2048
<5>[528093.859091] UBI: VID header offset:          2048 (aligned 2048)
<5>[528093.865200] UBI: data offset:                4096
<5>[528093.973227] UBI: max. sequence number:       323
<5>[528093.988726] UBI: attached mtd6 to ubi2
<5>[528093.992580] UBI: MTD device name:            "config"
<5>[528093.997732] UBI: MTD device size:            15 MiB
<5>[528094.002733] UBI: number of good PEBs:        120
<5>[528094.007450] UBI: number of bad PEBs:         0
<5>[528094.011999] UBI: number of corrupted PEBs:   0
<5>[528094.016541] UBI: max. allowed volumes:       128
<5>[528094.021266] UBI: wear-leveling threshold:    4096
<5>[528094.026068] UBI: number of internal volumes: 1
<5>[528094.030617] UBI: number of user volumes:     1
<5>[528094.035158] UBI: available PEBs:             0
<5>[528094.039706] UBI: total number of reserved PEBs: 120
<5>[528094.044683] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[528094.050797] UBI: max/mean erase counter: 4/3
<5>[528094.055164] UBI: image sequence number:  1872325126
<5>[528094.060172] UBI: background thread "ubi_bgt2d" started, PID 6130
<5>[528094.185875] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[528094.192023] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[528094.199814] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[528094.207276] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[528094.213257] UBIFS: default compressor: lzo
<5>[528094.217453] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[528094.697006] UBIFS: un-mount UBI device 2, volume 0
<5>[528094.744684] UBI: mtd6 is detached from ubi2
[Diagnostic] Wed Feb 19 10:00:28 CET 2020, 555.78
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000180] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060215] Mount-cache hash table entries: 512
<6>[    0.060713] Initializing cgroup subsys cpuacct
<6>[    0.060741] Initializing cgroup subsys devices
<6>[    0.060776] CPU: Testing write buffer coherency: ok
<6>[    0.060940] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060965] Calibrating local timer... 299.88MHz.
<4>[    0.120064]  Creating cpu1_hotplug_thread....
<4>[    0.120153]  cpu1_hotplug_thread Created
<6>[    0.120169] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121577] CPU1: Booted secondary processor
<6>[    0.180042] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180094] Brought up 2 CPUs
<6>[    0.180107] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180839] devtmpfs: initialized
<6>[    0.182263] xor: measuring software checksum speed
<6>[    0.230000]    arm4regs  :  2128.800 MB/sec
<6>[    0.279977]    8regs     :  1437.600 MB/sec
<6>[    0.329957]    32regs    :  1409.600 MB/sec
<6>[    0.329964] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330142] NET: Registered protocol family 16
<6>[    0.330612] L310 cache controller enabled
<6>[    0.330625] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330703] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330708] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330723] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330730] ARMv7 AUX CTRL(1): 0x41
<6>[    0.331236] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331245] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331260] Power Management Mode Support For C2000: 
<6>[    0.331568] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347058] PCIe0: Link Up Success 
<6>[    0.347065] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347070] comcerto_pcie_rc_int_init
<6>[    0.347111] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338433] PCIe1: Link Up Failed 
<7>[    4.338553] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338614] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338628] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338749] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338848] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338858] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338871] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350273] bio: create slab <bio-0> at 0
<4>[    4.519949] raid6: int32x1     25 MB/s
<4>[    4.689445] raid6: int32x2     48 MB/s
<4>[    4.858864] raid6: int32x4     82 MB/s
<4>[    5.028704] raid6: int32x8    113 MB/s
<4>[    5.028710] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028882] vgaarb: loaded
<5>[    5.029175] SCSI subsystem initialized
<7>[    5.029308] libata version 3.00 loaded.
<6>[    5.029492] usbcore: registered new interface driver usbfs
<6>[    5.029565] usbcore: registered new interface driver hub
<6>[    5.029659] usbcore: registered new device driver usb
<6>[    5.029893] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030330] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030717] Switching to clocksource timer2
<5>[    5.030931] FS-Cache: Loaded
<6>[    5.031056] CacheFiles: Loaded
<6>[    5.031973] NET: Registered protocol family 2
<6>[    5.032169] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032807] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032991] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.033149] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.033156] TCP reno registered
<6>[    5.033164] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033194] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033436] NET: Registered protocol family 1
<6>[    5.033730] RPC: Registered named UNIX socket transport module.
<6>[    5.033737] RPC: Registered udp transport module.
<6>[    5.033742] RPC: Registered tcp transport module.
<6>[    5.033747] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033770] PCI: CLS 32 bytes, default 32
<6>[    6.072961] membuf_init: created membuf device(253, 0)
<6>[    6.073246] audit: initializing netlink socket (disabled)
<5>[    6.073276] type=2000 audit(6.070:1): initialized
<5>[    6.074256] VFS: Disk quotas dquot_6.5.2
<4>[    6.074395] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.075002] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.075263] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075947] fuse init (API version 7.17)
<6>[    6.076130] msgmni has been set to 932
<6>[    6.077847] async_tx: api initialized (async)
<6>[    6.077953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077963] io scheduler noop registered
<6>[    6.077968] io scheduler deadline registered
<6>[    6.078030] io scheduler cfq registered (default)
<6>[    6.078338] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.078686] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.375400] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025989] console [ttyS0] enabled
<6>[    7.165378] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.262126] brd: module loaded
<6>[    7.351080] loop: module loaded
<6>[    7.355596] nbd: registered device at major 43
<6>[    7.365338] SCSI Media Changer driver v0.25 
<7>[    7.369721] ahci 0000:00:00.0: version 3.0
<4>[    7.369739] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.375498] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.382529] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.388065] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.396194] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.405243] scsi0 : ahci
<6>[    7.408164] scsi1 : ahci
<6>[    7.410889] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.418221] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.425691] SATA Serdes: 48Mhz ref clk
<6>[    7.429940] Serdes2: Lane OK Passed
<4>[    7.433456] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.438141] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.445917] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.454508] scsi2 : ahci_platform
<6>[    7.458047] scsi3 : ahci_platform
<6>[    7.461529] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.469471] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.478338] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.487697] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.495597] Fixed MDIO Bus: probed
<6>[    7.499059] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.703260] Core Release: 2.81a
<4>[    7.706411] Setting default values for core params
<6>[    7.820759] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.826214] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.910995] Using Buffer DMA mode
<4>[    7.914320] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.920167] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.925760] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.930157] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.934961] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.934976] drivers/usb/core/inode.c: creating file '001'
<6>[    7.934989] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.942089] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.947476] Init: Port Power? op_state=1
<4>[    7.951416] Init: Power Port (0)
<7>[    7.954686] usb usb1: default language 0x0409
<7>[    7.954705] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.954712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.961530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.968772] usb usb1: Product: DWC OTG Controller
<6>[    7.970769] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.979701] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.985046] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.989435] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.996258] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    8.003856] usb usb1: usb_probe_device
<7>[    8.003865] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.003889] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.003983] hub 1-0:1.0: usb_probe_interface
<7>[    8.003989] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.003996] hub 1-0:1.0: USB hub found
<6>[    8.007782] hub 1-0:1.0: 1 port detected
<7>[    8.011739] hub 1-0:1.0: standalone hub
<7>[    8.011744] hub 1-0:1.0: ganged power switching
<7>[    8.011750] hub 1-0:1.0: individual port over-current protection
<7>[    8.011756] hub 1-0:1.0: Single TT
<7>[    8.011762] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.011769] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.011792] hub 1-0:1.0: local power source is good
<7>[    8.011799] hub 1-0:1.0: enabling power on all ports
<6>[    8.011806] ata1.00: configured for UDMA/133
<5>[    8.012182] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.012195] ata1.00: set queue depth = 31
<4>[    8.012366] Check proc_name[ahci].
<5>[    8.012657] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.012976] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.012984] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.013185] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.013194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.013255] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<7>[    8.064256] drivers/usb/core/inode.c: creating file '001'
<7>[    8.064489] Module dwc_common_port init
<6>[    8.064667] mousedev: PS/2 mouse device common for all mice
<6>[    8.070458] i2c /dev entries driver
<4>[    8.074071] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.081929] comcerto_wdt: support registered
<6>[    8.086240] md: linear personality registered for level -1
<6>[    8.091799] md: raid0 personality registered for level 0
<6>[    8.097161] md: raid1 personality registered for level 1
<6>[    8.102527] md: raid10 personality registered for level 10
<6>[    8.108053] md: raid6 personality registered for level 6
<6>[    8.113416] md: raid5 personality registered for level 5
<6>[    8.113658]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.122857] md: raid4 personality registered for level 4
<5>[    8.123509] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.132813] md: multipath personality registered for level -4
<6>[    8.138937] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.147467] dm_crypt using the OCF for crypto acceleration.
<6>[    8.153251] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.158755] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.165323] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.170764] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.170768] 
<6>[    8.180431] device-mapper: multipath service-time: version 0.2.0 loaded
<7>[    8.187361] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.191002] ALSA device list:
<6>[    8.193981]   No soundcards found.
<6>[    8.198027] TCP cubic registered
<6>[    8.201281] NET: Registered protocol family 17
<6>[    8.205764] NET: Registered protocol family 15
<6>[    8.210219] Initializing NETLINK_KEY socket
<6>[    8.214440] NET: Registered protocol family 5
<6>[    8.218898] lib80211: common routines for IEEE802.11 drivers
<7>[    8.224584] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.224591] Registering the dns_resolver key type
<6>[    8.229350] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.237053] Clocks: disabled unused pll2
<6>[    8.240995] Clocks: disabled unused uart
<6>[    8.244927] Clocks: disabled unused gemtx
<6>[    8.248947] Clocks: disabled unused ipsec_spacc
<6>[    8.253493] Clocks: disabled unused dpi_cie
<6>[    8.257686] Clocks: disabled unused dpi_decomp
<6>[    8.262146] Clocks: disabled unused ntgref
<6>[    8.266251] Clocks: disabled unused pcie1
<6>[    8.270270] Clocks: disabled unused usb1
<6>[    8.274206] Clocks: disabled unused ext_phy0
<6>[    8.278485] Clocks: disabled unused ext_phy1
<6>[    8.282769] Clocks: disabled unused ext_phy2
<6>[    8.287048] Clocks: disabled unused tpi
<7>[    8.290767] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290780] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290784] 
<7>[    8.290792] hub 1-0:1.0: over-current change on port 1
<6>[    8.299360] Clocks: disabled unused csys
<6>[    8.303299] Clocks: disabled unused tsuntg
<6>[    8.307406] Clocks: disabled unused sata_occ
<6>[    8.311690] Clocks: disabled unused pcie_occ
<6>[    8.315970] Clocks: disabled unused sgmii_occ
<7>[    8.400771] hub 1-0:1.0: enabling power on all ports
<4>[    8.513237] Registering CPUFreq(comcerto)
<4>[    8.517543] Please be patient, while OpenWrt loads ...
<6>[    8.560773] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.567593] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.574430] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.582335] ata2.00: configured for UDMA/133
<5>[    8.586991] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.595135] ata2.00: set queue depth = 31
<4>[    8.599347] Check proc_name[ahci].
<5>[    8.602984] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.603076] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.616174] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.621646] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.626452] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.626522] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.675660]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.681098] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.703285] Freeing init memory: 13476K
<6>[    9.218831] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.225580] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.485119] RTC_TIME:Wed Feb 19 09:51:02 2020  0.000000 seconds
<6>[    9.510807] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.515458] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.521428] Creating 2 MTD partitions on "spi0.0":
<5>[    9.526236] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.531990] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.542340] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.549427] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.554619] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.563260] Using default values for hw ecc
<4>[    9.570872] Bad block table not found for chip 0
<4>[    9.578872] Bad block table not found for chip 0
<6>[    9.583506] Scanning device for bad blocks
<4>[    9.588647] Bad eraseblock 18 at 0x000000240000
<4>[    9.596126] Bad eraseblock 72 at 0x000000900000
<4>[    9.615756] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.622068] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.652865] Bad eraseblock 863 at 0x000006be0000
<4>[    9.678455] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.698162] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.845655] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.855170] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.861485] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.867943] Creating 5 MTD partitions on "comcertonand":
<5>[    9.873280] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.879565] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.885948] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.892152] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.898488] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.911474] usbcore: registered new interface driver usbhid
<6>[    9.917064] usbhid: USB HID core driver
<6>[    9.926552] usbcore: registered new interface driver usblp
<6>[    9.939147] ## xhci_plat_probe
<6>[    9.942252] ### comcerto_start_xhci
<6>[    9.945760] USB3.0 clock selected: internal
<6>[    9.953209] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.958117] drivers/usb/core/inode.c: creating file '002'
<6>[    9.958137] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.965365] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.970725] usb usb2: default language 0x0409
<7>[    9.970759] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.970766] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.977574] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.984821] usb usb2: Product: xHCI Host Controller
<6>[    9.989712] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.995129] usb usb2: SerialNumber: xhci-hcd
<7>[    9.999669] usb usb2: usb_probe_device
<7>[    9.999679] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.999691] xHCI xhci_add_endpoint called for root hub
<7>[    9.999698] xHCI xhci_check_bandwidth called for root hub
<7>[    9.999717] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.999807] hub 2-0:1.0: usb_probe_interface
<7>[    9.999814] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.999821] hub 2-0:1.0: USB hub found
<6>[   10.003613] hub 2-0:1.0: 1 port detected
<7>[   10.007546] hub 2-0:1.0: standalone hub
<7>[   10.007551] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.007557] hub 2-0:1.0: individual port over-current protection
<7>[   10.007563] hub 2-0:1.0: Single TT
<7>[   10.007569] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.007576] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.007590] hub 2-0:1.0: local power source is good
<7>[   10.007596] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.007746] drivers/usb/core/inode.c: creating file '001'
<6>[   10.007816] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.012750] drivers/usb/core/inode.c: creating file '003'
<6>[   10.012765] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.019859] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.019871] usb usb3: default language 0x0409
<7>[   10.019888] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.019895] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.026727] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.033983] usb usb3: Product: xHCI Host Controller
<6>[   10.038873] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.044291] usb usb3: SerialNumber: xhci-hcd
<7>[   10.048810] usb usb3: usb_probe_device
<7>[   10.048819] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.048829] xHCI xhci_add_endpoint called for root hub
<7>[   10.048835] xHCI xhci_check_bandwidth called for root hub
<7>[   10.048853] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.048938] hub 3-0:1.0: usb_probe_interface
<7>[   10.048945] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.048951] hub 3-0:1.0: USB hub found
<6>[   10.052736] hub 3-0:1.0: 1 port detected
<7>[   10.056669] hub 3-0:1.0: standalone hub
<7>[   10.056674] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.056680] hub 3-0:1.0: individual port over-current protection
<7>[   10.056687] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.056694] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.056707] hub 3-0:1.0: local power source is good
<7>[   10.056713] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.056858] drivers/usb/core/inode.c: creating file '001'
<6>[   10.064306] Initializing USB Mass Storage driver...
<6>[   10.069307] usbcore: registered new interface driver usb-storage
<6>[   10.075353] USB Mass Storage support registered.
<7>[   10.100804] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.150824] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.201141] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.201184] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.320801] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.343204] usb 2-1: default language 0x0409
<7>[   10.343830] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.343839] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.350566] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.357755] usb 2-1: Product: USB2.0 Hub
<6>[   10.361701] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.366541] usb 2-1: usb_probe_device
<7>[   10.366552] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.372288] usb 2-1: Successful Endpoint Configure command
<7>[   10.372658] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.372808] hub 2-1:1.0: usb_probe_interface
<7>[   10.372816] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.372823] hub 2-1:1.0: USB hub found
<6>[   10.376852] hub 2-1:1.0: 4 ports detected
<7>[   10.380928] hub 2-1:1.0: standalone hub
<7>[   10.380936] hub 2-1:1.0: individual port power switching
<7>[   10.380942] hub 2-1:1.0: individual port over-current protection
<7>[   10.403900] usb 2-1: Successful Endpoint Configure command
<7>[   10.404233] hub 2-1:1.0: TT per port
<7>[   10.404243] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.404250] hub 2-1:1.0: Port indicators are supported
<7>[   10.404257] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.404502] usb 2-1: Successful Endpoint Configure command
<7>[   10.404673] hub 2-1:1.0: local power source is good
<7>[   10.404684] hub 2-1:1.0: enabling power on all ports
<7>[   10.405561] drivers/usb/core/inode.c: creating file '002'
<7>[   10.405660] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.405691] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.461393] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.467780] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.501653] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.509623] flashcache: flashcache-1.0-dummy initialized
<6>[   10.520943] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.542720] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.542894] usb 3-1: default language 0x0409
<7>[   10.543429] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.543437] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.550162] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.557356] usb 3-1: Product: USB3.0 Hub
<6>[   10.561311] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.566120] usb 3-1: usb_probe_device
<7>[   10.566130] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.579855] usb 3-1: Successful Endpoint Configure command
<7>[   10.580038] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.580438] hub 3-1:1.0: usb_probe_interface
<7>[   10.580446] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.580453] hub 3-1:1.0: USB hub found
<6>[   10.584516] hub 3-1:1.0: 4 ports detected
<7>[   10.588539] hub 3-1:1.0: standalone hub
<7>[   10.588545] hub 3-1:1.0: individual port power switching
<7>[   10.588551] hub 3-1:1.0: individual port over-current protection
<7>[   10.588559] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.588566] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.588761] usb 3-1: Successful Endpoint Configure command
<7>[   10.588905] hub 3-1:1.0: local power source is good
<7>[   10.589014] hub 3-1:1.0: enabling power on all ports
<7>[   10.589751] drivers/usb/core/inode.c: creating file '002'
<7>[   10.600799] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.601040] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.680238] UBI: attaching mtd3 to ubi0
<6>[   10.681240] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.690737] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.697027] UBI: logical eraseblock size:    126976 bytes
<5>[   10.702444] UBI: smallest flash I/O unit:    2048
<7>[   10.704768] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.705376] usb 2-1.4: default language 0x0409
<5>[   10.707162] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.712377] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.712384] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.712392] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.712398] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.712403] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.712409] usb 2-1.4: SerialNumber: 3B1524X23300  
<5>[   10.745015] UBI: data offset:                4096
<7>[   10.750105] usb 2-1.4: usb_probe_device
<7>[   10.750116] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.750181] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.787850] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.788542] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.788666] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.788675] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.111826] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.111994] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.127603] drivers/usb/core/inode.c: creating file '003'
<7>[   11.127684] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.225229] UBI: max. sequence number:       0
<7>[   12.261925] gluebi (pid 391): gluebi_resized: got update notification for unknown UBI device 0 volume 0
<5>[   12.261936] UBI: volume 0 ("rootfs2") re-sized from 1652 to 1702 LEBs
<5>[   12.268736] UBI: attached mtd3 to ubi0
<5>[   12.272513] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.278186] UBI: MTD device size:            216 MiB
<5>[   12.283170] UBI: number of good PEBs:        1723
<5>[   12.287885] UBI: number of bad PEBs:         5
<5>[   12.292346] UBI: number of corrupted PEBs:   0
<5>[   12.296800] UBI: max. allowed volumes:       128
<5>[   12.301433] UBI: wear-leveling threshold:    4096
<5>[   12.306148] UBI: number of internal volumes: 1
<5>[   12.310602] UBI: number of user volumes:     1
<5>[   12.315061] UBI: available PEBs:             0
<5>[   12.319514] UBI: total number of reserved PEBs: 1723
<5>[   12.324495] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.330604] UBI: max/mean erase counter: 24/16
<5>[   12.335063] UBI: image sequence number:  1486693232
<5>[   12.339966] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.460239] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.466368] UBIFS: mounted read-only
<5>[   12.469954] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.477992] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.485328] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.491181] UBIFS: default compressor: lzo
<5>[   12.495286] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.975839] UBIFS: un-mount UBI device 0, volume 0
<5>[   34.029856] UBI: mtd3 is detached from ubi0
<6>[   34.042901] usbcore: registered new interface driver usbserial
<6>[   34.048752] usbserial: USB Serial Driver core
<6>[   34.058671] USB Serial support registered for pl2303
<6>[   34.063764] usbcore: registered new interface driver pl2303
<6>[   34.069352] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.081239] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.094868] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.101282] Disabling lock debugging due to kernel taint
<5>[   34.127698] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.127704] NTFSJ support included
<5>[   34.127706] exFAT support included
<5>[   34.127708] Hfs+J support included
<5>[   34.127710] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.154941] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.159397] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.434690] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.444052] udev: starting version 140
<6>[   34.450917] pfe_module_init
<6>[   34.453768] pfe_platform_probe
<6>[   34.457864] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.463693] pfe_probe
<6>[   34.465972] PFE Driver version:
<6>[   34.465974] pfe_ctrl_10_00_4
<6>[   34.465976] built with pfe sources version: pfe_10_00_3
<6>[   34.477248] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.486846] pfe_hw_init
<6>[   34.489297] CLASS version: 20
<6>[   34.492275] TMU version: 1011231
<6>[   34.495510] BMU1 version: 21
<6>[   34.498396] BMU2 version: 21
<6>[   34.501287] EMAC1 network cfg: 80000
<6>[   34.504870] EMAC2 network cfg: 80000
<6>[   34.508452] EMAC3 network cfg: 80000
<6>[   34.512039] EGPI1 version: 50
<6>[   34.515013] EGPI2 version: 50
<6>[   34.517987] EGPI3 version: 50
<6>[   34.520964] HGPI version: 50
<6>[   34.523850] GPT version: 0
<6>[   34.526562] HIF version: 10
<6>[   34.529360] HIF NOPCY version: 10
<6>[   34.532686] UTIL version: 20
<6>[   34.535573] bmu_init(1) done
<6>[   34.538460] bmu_init(2) done
<6>[   34.547812] class_init() done
<6>[   34.550795] tmu_init: mem init
<6>[   34.553856] tmu_init: lmem init
<6>[   34.557049] tmu_init() done
<6>[   34.559848] util_init() done
<6>[   34.562742] gpi_init(1) done
<6>[   34.565630] gpi_init(2) done
<6>[   34.568518] gpi_init(3) done
<6>[   34.571411] gpi_init(hif) done
<6>[   34.574471] bmu_enable(1) done
<6>[   34.577531] bmu_enable(2) done
<6>[   34.580592] pfe_hif_lib_init
<6>[   34.583656] pfe_hif_init
<6>[   34.586196] pfe_hif_alloc_descr
<6>[   34.589442] pfe_hif_init_buffers
<6>[   34.592807] pfe_firmware_init
<6>[   34.755202] pfe_load_elf
<3>[   34.757754] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.789285] PFE binary version: pfe_10_00_3
<6>[   34.793502] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.799960] pfe_load_elf
<6>[   34.803882] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.809207] pfe_load_elf
<6>[   34.813530] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.819068] pfe_ctrl_init
<6>[   34.839807] pfe_ctrl_init finished
<6>[   34.839813] pfe_ctrl_timer
<6>[   34.845954] pfe_eth_init
<6>[   34.857254] Comcerto MDIO Bus: probed
<6>[   34.862281] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.870735] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.877588] pfe_vwd_init
<6>[   34.880256] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.885264] pfe_vwd_driver_init: start
<4>[   34.889028] pfe_vwd_up: start
<6>[   34.892067] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.899138] pfe_vwd_driver_init: end
<6>[   34.902735] pfe_pcap_init
<6>[   34.942665] eth0: pfe_eth_open
<6>[   34.945881] hif_process_client_req: register client_id 0
<6>[   34.951239] pfe_hif_client_register
<6>[   34.954758] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.963105] eth0: pfe_gemac_init
<6>[   34.967626] eth0: pfe_eth_close
<6>[   35.010779] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.020204] hif_process_client_req: unregister client_id 0
<6>[   35.025711] pfe_hif_client_unregister
<6>[   35.029830] eth1: pfe_eth_open
<6>[   35.033026] hif_process_client_req: register client_id 1
<6>[   35.038351] pfe_hif_client_register
<6>[   35.041872] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   35.050161] eth1: pfe_gemac_init
<6>[   35.054172] eth1: pfe_eth_close
<6>[   35.090756] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.100177] hif_process_client_req: unregister client_id 1
<6>[   35.105682] pfe_hif_client_unregister
<6>[   35.548199] kjournald starting.  Commit interval 5 seconds
<6>[   35.553759] EXT3-fs (sda1): using internal journal
<6>[   35.558568] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   36.009309] kjournald starting.  Commit interval 5 seconds
<6>[   36.018259] EXT3-fs (sda1): using internal journal
<6>[   36.023089] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.513540] kjournald starting.  Commit interval 5 seconds
<6>[   36.519071] EXT3-fs (sdb1): using internal journal
<6>[   36.523904] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.918736] md: md9 stopped.
<6>[   36.924300] md: bind<sdb1>
<6>[   36.927366] md: bind<sda1>
<6>[   36.933151] bio: create slab <bio-1> at 1
<6>[   36.937369] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.942985] created bitmap (1 pages) for device md9
<6>[   36.948049] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.978875] md9: detected capacity change from 0 to 542769152
<6>[   38.038915]  md9: unknown partition table
<6>[   38.309777] kjournald starting.  Commit interval 5 seconds
<6>[   38.320951] EXT3-fs (md9): using internal journal
<6>[   38.325676] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.652024] md: md13 stopped.
<6>[   38.660402] md: bind<sdb4>
<6>[   38.663446] md: bind<sda4>
<6>[   38.669280] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.674956] created bitmap (1 pages) for device md13
<6>[   38.680129] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.722321] md13: detected capacity change from 0 to 469893120
<4>[   57.700678] set stripe cache size 1024
<4>[   57.705290] STRIPE_CACHE_SIZE is 1024
<6>[   58.808050] md: bind<sda2>
<6>[   58.817068] md: bind<sdb2>
<6>[   58.822954] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   58.828645] created bitmap (1 pages) for device md256
<6>[   58.833943] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   58.875024] md256: detected capacity change from 0 to 542834688
<6>[   58.945150]  md256: unknown partition table
<6>[   59.018585] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   59.443419] md: bind<sda5>
<6>[   59.446368] md: bind<sdb5>
<6>[   59.452234] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   59.457937] created bitmap (1 pages) for device md322
<6>[   59.463278] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   59.487578] md322: detected capacity change from 0 to 7408779264
<6>[   59.550208]  md322: unknown partition table
<6>[   59.621145] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   59.950531]  md13: unknown partition table
<6>[   60.388130] md: md1 stopped.
<6>[   60.403001] md: bind<sdb3>
<6>[   60.405982] md: bind<sda3>
<6>[   60.411870] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   60.417271] md1: detected capacity change from 0 to 5990981238784
<6>[   60.495093]  md1: unknown partition table
<6>[   70.904268] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   77.874884] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   81.774752] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   82.818815] [S30mountall] start
<5>[   83.247525] UBI: attaching mtd3 to ubi0
<5>[   83.251415] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   83.257699] UBI: logical eraseblock size:    126976 bytes
<5>[   83.263130] UBI: smallest flash I/O unit:    2048
<5>[   83.267846] UBI: VID header offset:          2048 (aligned 2048)
<5>[   83.273874] UBI: data offset:                4096
<5>[   84.756050] UBI: max. sequence number:       2
<5>[   84.772894] UBI: attached mtd3 to ubi0
<5>[   84.776659] UBI: MTD device name:            "boot1_rootfs2"
<5>[   84.782349] UBI: MTD device size:            216 MiB
<5>[   84.787326] UBI: number of good PEBs:        1723
<5>[   84.792050] UBI: number of bad PEBs:         5
<5>[   84.796504] UBI: number of corrupted PEBs:   0
<5>[   84.800963] UBI: max. allowed volumes:       128
<5>[   84.805590] UBI: wear-leveling threshold:    4096
<5>[   84.810305] UBI: number of internal volumes: 1
<5>[   84.814762] UBI: number of user volumes:     1
<5>[   84.819216] UBI: available PEBs:             0
<5>[   84.823674] UBI: total number of reserved PEBs: 1723
<5>[   84.828651] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   84.834763] UBI: max/mean erase counter: 25/16
<5>[   84.839218] UBI: image sequence number:  1486693232
<5>[   84.844123] UBI: background thread "ubi_bgt0d" started, PID 1603
<5>[   84.974354] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   84.980467] UBIFS: mounted read-only
<5>[   84.984066] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   84.992099] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   84.999429] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   85.005281] UBIFS: default compressor: lzo
<5>[   85.009387] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  107.849444] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.916898] UBI: mtd3 is detached from ubi0
<5>[  108.290022] UBI: attaching mtd3 to ubi0
<5>[  108.293928] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  108.300212] UBI: logical eraseblock size:    126976 bytes
<5>[  108.305642] UBI: smallest flash I/O unit:    2048
<5>[  108.310359] UBI: VID header offset:          2048 (aligned 2048)
<5>[  108.316386] UBI: data offset:                4096
<5>[  109.798076] UBI: max. sequence number:       2
<5>[  109.814917] UBI: attached mtd3 to ubi0
<5>[  109.818683] UBI: MTD device name:            "boot1_rootfs2"
<5>[  109.824371] UBI: MTD device size:            216 MiB
<5>[  109.829348] UBI: number of good PEBs:        1723
<5>[  109.834073] UBI: number of bad PEBs:         5
<5>[  109.838527] UBI: number of corrupted PEBs:   0
<5>[  109.842987] UBI: max. allowed volumes:       128
<5>[  109.847615] UBI: wear-leveling threshold:    4096
<5>[  109.852334] UBI: number of internal volumes: 1
<5>[  109.856788] UBI: number of user volumes:     1
<5>[  109.861245] UBI: available PEBs:             0
<5>[  109.865699] UBI: total number of reserved PEBs: 1723
<5>[  109.870676] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  109.876788] UBI: max/mean erase counter: 25/16
<5>[  109.881246] UBI: image sequence number:  1486693232
<5>[  109.886147] UBI: background thread "ubi_bgt0d" started, PID 1736
<5>[  110.008238] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  110.014373] UBIFS: mounted read-only
<5>[  110.017960] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  110.026000] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  110.033338] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  110.039186] UBIFS: default compressor: lzo
<5>[  110.043297] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  139.941751] UBIFS: un-mount UBI device 0, volume 0
<5>[  139.996902] UBI: mtd3 is detached from ubi0
<6>[  140.340893] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  158.134501] UBI: attaching mtd6 to ubi2
<5>[  158.138362] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  158.144691] UBI: logical eraseblock size:    126976 bytes
<5>[  158.150105] UBI: smallest flash I/O unit:    2048
<5>[  158.154833] UBI: VID header offset:          2048 (aligned 2048)
<5>[  158.160860] UBI: data offset:                4096
<5>[  158.279534] UBI: max. sequence number:       324
<5>[  158.295904] UBI: attached mtd6 to ubi2
<5>[  158.299676] UBI: MTD device name:            "config"
<5>[  158.304783] UBI: MTD device size:            15 MiB
<5>[  158.309674] UBI: number of good PEBs:        120
<5>[  158.314309] UBI: number of bad PEBs:         0
<5>[  158.318763] UBI: number of corrupted PEBs:   0
<5>[  158.323226] UBI: max. allowed volumes:       128
<5>[  158.327857] UBI: wear-leveling threshold:    4096
<5>[  158.332579] UBI: number of internal volumes: 1
<5>[  158.337037] UBI: number of user volumes:     1
<5>[  158.341507] UBI: available PEBs:             0
<5>[  158.345966] UBI: total number of reserved PEBs: 120
<5>[  158.350859] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  158.356882] UBI: max/mean erase counter: 4/3
<5>[  158.361170] UBI: image sequence number:  1872325126
<5>[  158.370360] UBI: background thread "ubi_bgt2d" started, PID 2311
<5>[  158.553723] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  158.559760] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  158.567377] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  158.574717] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  158.580565] UBIFS: default compressor: lzo
<5>[  158.584679] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  158.995284] UBIFS: un-mount UBI device 2, volume 0
<5>[  159.095085] UBI: mtd6 is detached from ubi2
<4>[  160.041824] [S30mountall] end
<4>[  160.049339] [S31init_hardware] start
<6>[  160.218015] sysinfo: Module loaded.
<6>[  160.698868] fnotify: Load file notify kernel module.
<6>[  161.976654] usbcore: registered new interface driver snd-usb-audio
<6>[  161.989154] usbcore: registered new interface driver snd-usb-caiaq
<6>[  162.010581] Linux video capture interface: v2.00
<6>[  162.115149] usbcore: registered new interface driver uvcvideo
<6>[  162.120935] USB Video Class driver (1.1.1)
<6>[  162.587087] NET: Registered protocol family 10
<4>[  165.593681] [S31init_hardware] end
<4>[  165.597660] [S32init_mac_addr] start
<6>[  166.738496] eth0: pfe_eth_open
<6>[  166.741713] hif_process_client_req: register client_id 1
<6>[  166.747039] pfe_hif_client_register
<6>[  166.750538] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  166.758840] eth0: pfe_gemac_init
<6>[  166.762655] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  169.366617] eth1: pfe_eth_open
<6>[  169.369817] hif_process_client_req: register client_id 0
<6>[  169.375164] pfe_hif_client_register
<6>[  169.378675] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  169.386975] eth1: pfe_gemac_init
<6>[  169.390803] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[  169.760980] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  169.766511] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  171.237726] [S32init_mac_addr] end
<4>[  171.241977] [S33sysinit] start
<7>[  181.210748] eth0: no IPv6 routers present
<5>[  193.050428] UBI: attaching mtd6 to ubi2
<5>[  193.054304] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  193.060588] UBI: logical eraseblock size:    126976 bytes
<5>[  193.066007] UBI: smallest flash I/O unit:    2048
<5>[  193.070724] UBI: VID header offset:          2048 (aligned 2048)
<5>[  193.076750] UBI: data offset:                4096
<5>[  193.184410] UBI: max. sequence number:       325
<5>[  193.199719] UBI: attached mtd6 to ubi2
<5>[  193.203511] UBI: MTD device name:            "config"
<5>[  193.208577] UBI: MTD device size:            15 MiB
<5>[  193.213471] UBI: number of good PEBs:        120
<5>[  193.218099] UBI: number of bad PEBs:         0
<5>[  193.222558] UBI: number of corrupted PEBs:   0
<5>[  193.227012] UBI: max. allowed volumes:       128
<5>[  193.231644] UBI: wear-leveling threshold:    4096
<5>[  193.236359] UBI: number of internal volumes: 1
<5>[  193.240818] UBI: number of user volumes:     1
<5>[  193.245272] UBI: available PEBs:             0
<5>[  193.249726] UBI: total number of reserved PEBs: 120
<5>[  193.254618] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  193.260640] UBI: max/mean erase counter: 4/3
<5>[  193.264923] UBI: image sequence number:  1872325126
<5>[  193.269824] UBI: background thread "ubi_bgt2d" started, PID 2997
<5>[  193.397444] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  193.403494] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  193.411092] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  193.418422] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  193.424274] UBIFS: default compressor: lzo
<5>[  193.428381] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  193.448603] UBIFS: un-mount UBI device 2, volume 0
<4>[  279.877456] [S33sysinit] end
<4>[  279.880995] [S34shutdown_check] start
<4>[  280.181480] [S34shutdown_check] end
<4>[  280.185753] [S35init_disk] start
<5>[  280.491499] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  280.497528] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  280.505132] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  280.512467] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  280.518315] UBIFS: default compressor: lzo
<5>[  280.522428] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  280.650992] UBIFS: un-mount UBI device 2, volume 0
<5>[  280.700462] UBI: mtd6 is detached from ubi2
<4>[  282.189655] [S35init_disk] end
<4>[  282.193493] [S40init_network] start
<4>[  282.206862] [S40init_network] end
<4>[  282.210887] [S42hostname] start
<4>[  282.664843] [S42hostname] end
<4>[  282.668371] [S45network] start
<5>[  292.686636] Bridge firewalling registered
<6>[  293.231912] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  293.239084] bonding: MII link monitoring set to 100 ms
<6>[  301.004599] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  310.044339] [S45network] end
<4>[  310.047782] [S46iSCSItrgt] start
<4>[  315.518578] [S46iSCSItrgt] end
<4>[  315.522460] [S46iscsiinit] start
<6>[  315.557873] Loading iSCSI transport class v2.0-870.
<5>[  315.598596] iscsi: registered transport (tcp)
<4>[  317.005393] [S46iscsiinit] end
<4>[  317.009010] [S55urandom] start
<4>[  317.049465] [S55urandom] end
<4>[  317.052996] [S56mariadb] start
<4>[  324.622753] [S56mariadb] end
<4>[  324.626220] [S56start_service] start
<4>[  324.715261] [S56start_service] end
<4>[  324.719234] [S57init_qpkg] start
<4>[  358.093015] ==== memory usage ====
<4>[  358.113117] MemTotal:         490756 kB
<4>[  358.117002] MemFree:           67852 kB
<4>[  358.120972] Buffers:           17536 kB
<4>[  358.124844] Cached:           286452 kB
<4>[  358.128721] SwapCached:            8 kB
<4>[  358.132641] Active:           171128 kB
<4>[  358.136525] Inactive:         199404 kB
<4>[  358.140499] Active(anon):      56144 kB
<4>[  358.144473] Inactive(anon):    55564 kB
<4>[  358.148340] Active(file):     114984 kB
<4>[  358.152269] Inactive(file):   143840 kB
<4>[  358.156159] Unevictable:        2012 kB
<4>[  358.160026] Mlocked:            2012 kB
<4>[  358.163942] SwapTotal:      24542452 kB
<4>[  358.167822] SwapFree:       24542436 kB
<4>[  358.171730] Dirty:               288 kB
<4>[  358.175646] Writeback:             0 kB
<4>[  358.179515] AnonPages:         68608 kB
<4>[  358.183425] Mapped:            15472 kB
<4>[  358.187291] Shmem:             45012 kB
<4>[  358.191188] Slab:              34396 kB
<4>[  358.195054] SReclaimable:      23024 kB
<4>[  358.201971] SUnreclaim:        11372 kB
<4>[  358.206096] KernelStack:        1608 kB
<4>[  358.209970] PageTables:         1356 kB
<4>[  358.213887] NFS_Unstable:          0 kB
<4>[  358.217757] Bounce:                0 kB
<4>[  358.221694] WritebackTmp:          0 kB
<4>[  358.225563] CommitLimit:    24787828 kB
<4>[  358.229430] Committed_AS:     879912 kB
<4>[  358.233377] VmallocTotal:    1302528 kB
<4>[  358.237266] VmallocUsed:       61368 kB
<4>[  358.241216] VmallocChunk:    1212348 kB
<4>[  358.294593] Node 0, zone      DMA
<4>[  358.297951]   pages free     10981
<4>[  358.310844]         min      366
<4>[  358.314112]         low      457
<4>[  358.317366]         high     549
<4>[  358.320617]         scanned  0
<4>[  358.330859]         spanned  11264
<4>[  358.334301]         present  11154
<4>[  358.350850]     nr_free_pages 10981
<4>[  358.354378]     nr_inactive_anon 0
<4>[  358.357805]     nr_active_anon 0
<4>[  358.370828]     nr_inactive_file 0
<4>[  358.374267]     nr_active_file 0
<4>[  358.377519]     nr_unevictable 0
<4>[  358.390835]     nr_mlock     0
<4>[  358.393929]     nr_anon_pages 0
<4>[  358.397094]     nr_mapped    0
<4>[  358.400170]     nr_file_pages 0
<4>[  358.410846]     nr_dirty     0
<4>[  358.413937]     nr_writeback 0
<4>[  358.417016]     nr_slab_reclaimable 0
<4>[  358.430806]     nr_slab_unreclaimable 0
<4>[  358.434705]     nr_page_table_pages 0
<4>[  358.438398]     nr_kernel_stack 0
<4>[  358.450845]     nr_unstable  0
<4>[  358.453938]     nr_bounce    0
<4>[  358.457020]     nr_vmscan_write 0
<4>[  358.460361]     nr_vmscan_immediate_reclaim 0
<4>[  358.478872]     nr_writeback_temp 0
<4>[  358.486434]     nr_isolated_anon 0
<4>[  358.489883]     nr_isolated_file 0
<4>[  358.498040]     nr_shmem     0
<4>[  358.501410]     nr_dirtied   0
<4>[  358.504506]     nr_written   0
<4>[  358.507590]     nr_anon_transparent_hugepages 0
<4>[  358.512225]         protection: (0, 443, 443)
<4>[  358.516617]   pagesets
<4>[  358.518999]     cpu: 0
<4>[  358.521424]               count: 2
<4>[  358.524860]               high:  6
<4>[  358.528305]               batch: 1
<4>[  358.531808]   vm stats threshold: 4
<4>[  358.535362]     cpu: 1
<4>[  358.537761]               count: 5
<4>[  358.541363]               high:  6
<4>[  358.544802]               batch: 1
<4>[  358.548231]   vm stats threshold: 4
<4>[  358.551997]   all_unreclaimable: 0
<4>[  358.555438]   start_pfn:         0
<4>[  358.559109]   inactive_ratio:    1
<4>[  358.564071] Node 0, zone   Normal
<4>[  358.567440]   pages free     5757
<4>[  358.574714]         min      3729
<4>[  358.594886]         low      4661
<4>[  358.599387]         high     5593
<4>[  358.602824]         scanned  0
<4>[  358.610599]         spanned  119808
<4>[  358.614229]         present  113518
<4>[  358.617748]     nr_free_pages 5757
<4>[  358.621215]     nr_inactive_anon 13891
<4>[  358.624995]     nr_active_anon 14244
<4>[  358.628662]     nr_inactive_file 35960
<4>[  358.632686]     nr_active_file 28746
<4>[  358.636303]     nr_unevictable 503
<4>[  358.639767]     nr_mlock     503
<4>[  358.643151]     nr_anon_pages 17323
<4>[  358.646676]     nr_mapped    3963
<4>[  358.650033]     nr_file_pages 75999
<4>[  358.668976]     nr_dirty     72
<4>[  358.672222]     nr_writeback 0
<4>[  358.675308]     nr_slab_reclaimable 5756
<4>[  358.679257]     nr_slab_unreclaimable 2843
<4>[  358.700884]     nr_page_table_pages 358
<4>[  358.704760]     nr_kernel_stack 201
<4>[  358.708275]     nr_unstable  0
<4>[  358.713967]     nr_bounce    0
<4>[  358.717073]     nr_vmscan_write 4
<4>[  358.720416]     nr_vmscan_immediate_reclaim 0
<4>[  358.724867]     nr_writeback_temp 0
<4>[  358.728389]     nr_isolated_anon 0
<4>[  358.731911]     nr_isolated_file 0
<4>[  358.735349]     nr_shmem     11253
<4>[  358.738781]     nr_dirtied   252318
<4>[  358.742411]     nr_written   251545
<4>[  358.745931]     nr_anon_transparent_hugepages 0
<4>[  358.750493]         protection: (0, 0, 0)
<4>[  358.754600]   pagesets
<4>[  358.756986]     cpu: 0
<4>[  358.759370]               count: 69
<4>[  358.763477]               high:  186
<4>[  358.767088]               batch: 31
<4>[  358.770602]   vm stats threshold: 12
<4>[  358.774268]     cpu: 1
<4>[  358.776660]               count: 183
<4>[  358.780263]               high:  186
<4>[  358.783915]               batch: 31
<4>[  358.787437]   vm stats threshold: 12
<4>[  358.791088]   all_unreclaimable: 0
<4>[  358.794519]   start_pfn:         11264
<4>[  358.798301]   inactive_ratio:    1
<4>[  358.823109] Filename				Type		Size	Used	Priority
<4>[  358.827781] /dev/md256                              partition	530108	16	-1
<4>[  358.834811] /dev/md322                              partition	7235132	0	-2
<4>[  358.841859] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  358.863101]               total         used         free       shared      buffers
<4>[  358.863109]   Mem:       490756       424592        66164            0        17536
<4>[  358.863113]  Swap:     24542452           16     24542436
<4>[  358.863116] Total:     25033208       424608     24608600
<4>[  358.904395] ==== end ====
<4>[  466.524093] [S57init_qpkg] end
<4>[  466.527701] [S57ldap] start
<4>[  466.566479] [S57ldap] end
<4>[  466.569639] [S58dbus] start
<4>[  468.815637] [S58dbus] end
<4>[  468.818955] [S58nsswitch] start
<4>[  469.011323] [S58nsswitch] end
<4>[  469.014848] [S58printer] start
<4>[  469.064655] [S58printer] end
<4>[  474.071973] [S59Qthttpd] start
<4>[  490.382726] [S59Qthttpd] end
<4>[  490.387662] [S62cupsd] start
<4>[  491.693470] [S62cupsd] end
<4>[  491.696713] [S62ntpd] start
<4>[  491.783083] [S62ntpd] end
<4>[  491.786224] [S62smb] start
<4>[  518.486137] [S62smb] end
<4>[  518.489219] [S64MediaService] start
<4>[  518.976974] [S64MediaService] end
<4>[  518.981756] [S65thttpd] start
<4>[  527.293875] [S65thttpd] end
<4>[  527.297196] [S66ImRd] start
<4>[  527.301328] [S66ImRd] end
<4>[  527.305050] [S66wfm_thttpd] start
<4>[  530.437934] [S66wfm_thttpd] end
<4>[  530.441676] [S67ftp] start
<4>[  530.680637] [S67ftp] end
<4>[  530.683754] [S70crond] start
<4>[  530.687972] [S70crond] end
<4>[  530.691446] [S72logo] start
<4>[  530.702317] [S72logo] end
<4>[  530.705509] [S73ntpclient] start
<4>[  530.732325] [S73ntpclient] end
<4>[  530.736146] [S75stunnel] start
<4>[  530.740664] [S75stunnel] end
<4>[  530.771659] [S77recycled] start
<4>[  532.112727] [S77recycled] end
<4>[  532.116475] [S78qraid1] start
<4>[  532.133481] [S78qraid1] end
<4>[  532.137015] [S83ups] start
<4>[  532.161332] [S83ups] end
<4>[  532.164473] [S85login] start
<4>[  532.168678] [S85login] end
<4>[  532.203600] [S89bonjour] start
<4>[  532.208249] [S89bonjour] end
<4>[  532.234006] [S89wsd] start
<4>[  532.238202] [S89wsd] end
<6>[  533.809603] Bluetooth: Core ver 2.16
<6>[  533.813288] NET: Registered protocol family 31
<6>[  533.817751] Bluetooth: HCI device and connection manager initialized
<6>[  533.824144] Bluetooth: HCI socket layer initialized
<6>[  533.829041] Bluetooth: L2CAP socket layer initialized
<6>[  533.834240] Bluetooth: SCO socket layer initialized
<6>[  533.960620] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  533.966384] usbcore: registered new interface driver btusb
<6>[  534.134925] Bluetooth: RFCOMM TTY layer initialized
<6>[  534.139839] Bluetooth: RFCOMM socket layer initialized
<6>[  534.145129] Bluetooth: RFCOMM ver 1.11
<4>[  543.188778] [S90twonkymedia] start
<4>[  543.193810] [S90twonkymedia] end
<4>[  543.197755] [S92lunportman] start
<4>[  543.202570] [S92lunportman] end
<4>[  543.206508] [S95snmp] start
<4>[  543.210656] [S95snmp] end
<4>[  543.224623] [S97upnpd] start
<4>[  543.228724] [S97upnpd] end
<4>[  543.234647] [S98init_nas] start
<5>[  551.282686] UBI: attaching mtd6 to ubi2
<5>[  551.286544] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  551.292859] UBI: logical eraseblock size:    126976 bytes
<5>[  551.298274] UBI: smallest flash I/O unit:    2048
<5>[  551.303022] UBI: VID header offset:          2048 (aligned 2048)
<5>[  551.309075] UBI: data offset:                4096
<5>[  551.437426] UBI: max. sequence number:       327
<5>[  551.452718] UBI: attached mtd6 to ubi2
<5>[  551.456486] UBI: MTD device name:            "config"
<5>[  551.461569] UBI: MTD device size:            15 MiB
<5>[  551.466459] UBI: number of good PEBs:        120
<5>[  551.471092] UBI: number of bad PEBs:         0
<5>[  551.475547] UBI: number of corrupted PEBs:   0
<5>[  551.480001] UBI: max. allowed volumes:       128
<5>[  551.484633] UBI: wear-leveling threshold:    4096
<5>[  551.489348] UBI: number of internal volumes: 1
<5>[  551.493806] UBI: number of user volumes:     1
<5>[  551.498260] UBI: available PEBs:             0
<5>[  551.502717] UBI: total number of reserved PEBs: 120
<5>[  551.507606] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  551.513631] UBI: max/mean erase counter: 4/3
<5>[  551.517911] UBI: image sequence number:  1872325126
<5>[  551.522819] UBI: background thread "ubi_bgt2d" started, PID 12609
<5>[  551.646175] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  551.652222] UBIFS: mounted read-only
<5>[  551.655809] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  551.663409] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  551.670744] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  551.676592] UBIFS: default compressor: lzo
<5>[  551.680699] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  551.694815] UBIFS: un-mount UBI device 2, volume 0
<5>[  551.726458] UBI: mtd6 is detached from ubi2
<4>[  554.463559] rule type=2, num=0
<4>[  558.483658] [S98init_nas] end
<4>[  558.487185] [S99atalk] start
<4>[  558.494269] [S99atalk] end
<4>[  558.497696] [S99cloudinstall_report_complete_daemon] start
<4>[  558.517577] [S99cloudinstall_report_complete_daemon] end
<4>[  558.531749] [S99init_iTune] start
<4>[  558.536397] [S99init_iTune] end
<4>[  558.540284] [S99mysqld] start
<4>[  558.579271] [S99mysqld] end
<4>[  558.613010] [S99nfs] start
<4>[  558.617096] [S99nfs] end
<4>[  558.620201] [S99porter] start
<4>[  558.657858] [S99porter] end
<4>[  558.691577] [S99qanalytic] start
<4>[  558.696210] [S99qanalytic] end
<4>[  558.699855] [S99qcloud] start
<4>[  558.769295] [S99qcloud] end
<4>[  558.799471] [S99qsyncman] start
<4>[  558.836871] [S99qsyncman] end
<4>[  558.840583] [S99sdmd.sh] start
<4>[  558.891627] [S99sdmd.sh] end
<4>[  558.895165] [S99sync_action.sh] start
<4>[  558.900109] [S99sync_action.sh] end
<4>[  559.011594] [S99z_antivirus] start
<4>[  559.017623] [S99z_antivirus] end
<4>[  574.016654] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  574.024617] NFSD: starting 90-second grace period
<4>[  686.517551] ====== 2020-02-19 10:02:39 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  694.448464] UBI: attaching mtd6 to ubi2
<5>[  694.452388] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  694.458698] UBI: logical eraseblock size:    126976 bytes
<5>[  694.464141] UBI: smallest flash I/O unit:    2048
<5>[  694.468863] UBI: VID header offset:          2048 (aligned 2048)
<5>[  694.474924] UBI: data offset:                4096
<5>[  694.625471] UBI: max. sequence number:       327
<5>[  694.644663] UBI: attached mtd6 to ubi2
<5>[  694.648444] UBI: MTD device name:            "config"
<5>[  694.653653] UBI: MTD device size:            15 MiB
<5>[  694.658563] UBI: number of good PEBs:        120
<5>[  694.663298] UBI: number of bad PEBs:         0
<5>[  694.667772] UBI: number of corrupted PEBs:   0
<5>[  694.672261] UBI: max. allowed volumes:       128
<5>[  694.676912] UBI: wear-leveling threshold:    4096
<5>[  694.681644] UBI: number of internal volumes: 1
<5>[  694.686173] UBI: number of user volumes:     1
<5>[  694.690643] UBI: available PEBs:             0
<5>[  694.695204] UBI: total number of reserved PEBs: 120
<5>[  694.700238] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  694.706278] UBI: max/mean erase counter: 4/3
<5>[  694.710571] UBI: image sequence number:  1872325126
<5>[  694.726616] UBI: background thread "ubi_bgt2d" started, PID 19436
<5>[  694.979125] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  694.985155] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  694.992789] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  695.000138] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  695.005997] UBIFS: default compressor: lzo
<5>[  695.010119] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  695.473456] UBIFS: un-mount UBI device 2, volume 0
<5>[  695.516873] UBI: mtd6 is detached from ubi2
<5>[22294.461684] UBI: attaching mtd6 to ubi2
<5>[22294.465537] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22294.471866] UBI: logical eraseblock size:    126976 bytes
<5>[22294.477285] UBI: smallest flash I/O unit:    2048
<5>[22294.482105] UBI: VID header offset:          2048 (aligned 2048)
<5>[22294.488129] UBI: data offset:                4096
<5>[22294.596719] UBI: max. sequence number:       328
<5>[22294.612044] UBI: attached mtd6 to ubi2
<5>[22294.615810] UBI: MTD device name:            "config"
<5>[22294.621082] UBI: MTD device size:            15 MiB
<5>[22294.626020] UBI: number of good PEBs:        120
<5>[22294.630786] UBI: number of bad PEBs:         0
<5>[22294.635248] UBI: number of corrupted PEBs:   0
<5>[22294.639902] UBI: max. allowed volumes:       128
<5>[22294.644533] UBI: wear-leveling threshold:    4096
<5>[22294.649300] UBI: number of internal volumes: 1
<5>[22294.653759] UBI: number of user volumes:     1
<5>[22294.658215] UBI: available PEBs:             0
<5>[22294.662686] UBI: total number of reserved PEBs: 120
<5>[22294.667577] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22294.673608] UBI: max/mean erase counter: 4/3
<5>[22294.677889] UBI: image sequence number:  1872325126
<5>[22294.682819] UBI: background thread "ubi_bgt2d" started, PID 20264
<5>[22294.822620] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22294.828702] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22294.836316] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22294.843659] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22294.849517] UBIFS: default compressor: lzo
<5>[22294.853624] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22295.094971] UBIFS: un-mount UBI device 2, volume 0
<5>[22295.172679] UBI: mtd6 is detached from ubi2
<5>[43894.860950] UBI: attaching mtd6 to ubi2
<5>[43894.864804] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[43894.871127] UBI: logical eraseblock size:    126976 bytes
<5>[43894.876541] UBI: smallest flash I/O unit:    2048
<5>[43894.881268] UBI: VID header offset:          2048 (aligned 2048)
<5>[43894.887290] UBI: data offset:                4096
<5>[43894.995037] UBI: max. sequence number:       329
<5>[43895.010319] UBI: attached mtd6 to ubi2
<5>[43895.014086] UBI: MTD device name:            "config"
<5>[43895.019184] UBI: MTD device size:            15 MiB
<5>[43895.024076] UBI: number of good PEBs:        120
<5>[43895.028704] UBI: number of bad PEBs:         0
<5>[43895.033169] UBI: number of corrupted PEBs:   0
<5>[43895.037623] UBI: max. allowed volumes:       128
<5>[43895.042260] UBI: wear-leveling threshold:    4096
<5>[43895.046976] UBI: number of internal volumes: 1
<5>[43895.051440] UBI: number of user volumes:     1
<5>[43895.055895] UBI: available PEBs:             0
<5>[43895.060359] UBI: total number of reserved PEBs: 120
<5>[43895.065249] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[43895.071279] UBI: max/mean erase counter: 4/3
<5>[43895.075564] UBI: image sequence number:  1872325126
<5>[43895.080519] UBI: background thread "ubi_bgt2d" started, PID 3753
<5>[43895.224788] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[43895.230846] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[43895.238439] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[43895.245780] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[43895.251642] UBIFS: default compressor: lzo
<5>[43895.255748] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[43895.471942] UBIFS: un-mount UBI device 2, volume 0
<5>[43895.515562] UBI: mtd6 is detached from ubi2
<5>[65495.195753] UBI: attaching mtd6 to ubi2
<5>[65495.199636] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[65495.205921] UBI: logical eraseblock size:    126976 bytes
<5>[65495.211410] UBI: smallest flash I/O unit:    2048
<5>[65495.216129] UBI: VID header offset:          2048 (aligned 2048)
<5>[65495.222201] UBI: data offset:                4096
<5>[65495.329959] UBI: max. sequence number:       330
<5>[65495.345233] UBI: attached mtd6 to ubi2
<5>[65495.349027] UBI: MTD device name:            "config"
<5>[65495.354094] UBI: MTD device size:            15 MiB
<5>[65495.359000] UBI: number of good PEBs:        120
<5>[65495.363629] UBI: number of bad PEBs:         0
<5>[65495.368083] UBI: number of corrupted PEBs:   0
<5>[65495.372551] UBI: max. allowed volumes:       128
<5>[65495.377185] UBI: wear-leveling threshold:    4096
<5>[65495.381937] UBI: number of internal volumes: 1
<5>[65495.386398] UBI: number of user volumes:     1
<5>[65495.390865] UBI: available PEBs:             0
<5>[65495.395320] UBI: total number of reserved PEBs: 120
<5>[65495.400218] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[65495.406240] UBI: max/mean erase counter: 4/3
<5>[65495.410526] UBI: image sequence number:  1872325126
<5>[65495.415429] UBI: background thread "ubi_bgt2d" started, PID 30817
<5>[65495.542291] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[65495.548355] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[65495.556015] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[65495.563384] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[65495.569266] UBIFS: default compressor: lzo
<5>[65495.573380] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[65495.789007] UBIFS: un-mount UBI device 2, volume 0
<5>[65495.850679] UBI: mtd6 is detached from ubi2
<5>[87095.271717] UBI: attaching mtd6 to ubi2
<5>[87095.275603] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[87095.281940] UBI: logical eraseblock size:    126976 bytes
<5>[87095.287371] UBI: smallest flash I/O unit:    2048
<5>[87095.292105] UBI: VID header offset:          2048 (aligned 2048)
<5>[87095.298127] UBI: data offset:                4096
<5>[87095.405861] UBI: max. sequence number:       331
<5>[87095.421181] UBI: attached mtd6 to ubi2
<5>[87095.424969] UBI: MTD device name:            "config"
<5>[87095.430067] UBI: MTD device size:            15 MiB
<5>[87095.434968] UBI: number of good PEBs:        120
<5>[87095.439608] UBI: number of bad PEBs:         0
<5>[87095.444062] UBI: number of corrupted PEBs:   0
<5>[87095.448516] UBI: max. allowed volumes:       128
<5>[87095.453152] UBI: wear-leveling threshold:    4096
<5>[87095.457872] UBI: number of internal volumes: 1
<5>[87095.462354] UBI: number of user volumes:     1
<5>[87095.466816] UBI: available PEBs:             0
<5>[87095.471284] UBI: total number of reserved PEBs: 120
<5>[87095.476174] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[87095.482204] UBI: max/mean erase counter: 4/3
<5>[87095.486485] UBI: image sequence number:  1872325126
<5>[87095.491439] UBI: background thread "ubi_bgt2d" started, PID 25357
<5>[87095.621363] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[87095.627393] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[87095.635007] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[87095.642348] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[87095.648195] UBIFS: default compressor: lzo
<5>[87095.652309] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[87095.873944] UBIFS: un-mount UBI device 2, volume 0
<5>[87095.945536] UBI: mtd6 is detached from ubi2
<5>[108695.452383] UBI: attaching mtd6 to ubi2
<5>[108695.456324] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[108695.462745] UBI: logical eraseblock size:    126976 bytes
<5>[108695.468254] UBI: smallest flash I/O unit:    2048
<5>[108695.473098] UBI: VID header offset:          2048 (aligned 2048)
<5>[108695.479244] UBI: data offset:                4096
<5>[108695.590239] UBI: max. sequence number:       334
<5>[108695.605603] UBI: attached mtd6 to ubi2
<5>[108695.609483] UBI: MTD device name:            "config"
<5>[108695.614647] UBI: MTD device size:            15 MiB
<5>[108695.619641] UBI: number of good PEBs:        120
<5>[108695.624358] UBI: number of bad PEBs:         0
<5>[108695.628906] UBI: number of corrupted PEBs:   0
<5>[108695.633448] UBI: max. allowed volumes:       128
<5>[108695.638163] UBI: wear-leveling threshold:    4096
<5>[108695.642976] UBI: number of internal volumes: 1
<5>[108695.647522] UBI: number of user volumes:     1
<5>[108695.652080] UBI: available PEBs:             0
<5>[108695.656650] UBI: total number of reserved PEBs: 120
<5>[108695.661658] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[108695.667783] UBI: max/mean erase counter: 4/3
<5>[108695.672173] UBI: image sequence number:  1872325126
<5>[108695.677262] UBI: background thread "ubi_bgt2d" started, PID 20320
<5>[108695.801825] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[108695.807941] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[108695.815650] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[108695.823088] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[108695.829035] UBIFS: default compressor: lzo
<5>[108695.833235] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[108696.050041] UBIFS: un-mount UBI device 2, volume 0
<5>[108696.099699] UBI: mtd6 is detached from ubi2
<5>[130295.530508] UBI: attaching mtd6 to ubi2
<5>[130295.534460] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[130295.540861] UBI: logical eraseblock size:    126976 bytes
<5>[130295.546361] UBI: smallest flash I/O unit:    2048
<5>[130295.551178] UBI: VID header offset:          2048 (aligned 2048)
<5>[130295.557287] UBI: data offset:                4096
<5>[130295.665057] UBI: max. sequence number:       335
<5>[130295.680439] UBI: attached mtd6 to ubi2
<5>[130295.684293] UBI: MTD device name:            "config"
<5>[130295.689470] UBI: MTD device size:            15 MiB
<5>[130295.694464] UBI: number of good PEBs:        120
<5>[130295.699200] UBI: number of bad PEBs:         0
<5>[130295.703742] UBI: number of corrupted PEBs:   0
<5>[130295.708283] UBI: max. allowed volumes:       128
<5>[130295.713007] UBI: wear-leveling threshold:    4096
<5>[130295.717811] UBI: number of internal volumes: 1
<5>[130295.722358] UBI: number of user volumes:     1
<5>[130295.726904] UBI: available PEBs:             0
<5>[130295.731453] UBI: total number of reserved PEBs: 120
<5>[130295.736431] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[130295.742550] UBI: max/mean erase counter: 4/3
<5>[130295.746919] UBI: image sequence number:  1872325126
<5>[130295.751935] UBI: background thread "ubi_bgt2d" started, PID 6452
<5>[130295.904868] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[130295.911016] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[130295.918697] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[130295.926135] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[130295.932086] UBIFS: default compressor: lzo
<5>[130295.936281] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[130296.144933] UBIFS: un-mount UBI device 2, volume 0
<5>[130296.198975] UBI: mtd6 is detached from ubi2
<5>[151895.603722] UBI: attaching mtd6 to ubi2
<5>[151895.607662] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[151895.614067] UBI: logical eraseblock size:    126976 bytes
<5>[151895.619577] UBI: smallest flash I/O unit:    2048
<5>[151895.624381] UBI: VID header offset:          2048 (aligned 2048)
<5>[151895.630496] UBI: data offset:                4096
<5>[151895.738246] UBI: max. sequence number:       336
<5>[151895.753672] UBI: attached mtd6 to ubi2
<5>[151895.757524] UBI: MTD device name:            "config"
<5>[151895.762700] UBI: MTD device size:            15 MiB
<5>[151895.767678] UBI: number of good PEBs:        120
<5>[151895.772403] UBI: number of bad PEBs:         0
<5>[151895.776945] UBI: number of corrupted PEBs:   0
<5>[151895.781496] UBI: max. allowed volumes:       128
<5>[151895.786211] UBI: wear-leveling threshold:    4096
<5>[151895.791021] UBI: number of internal volumes: 1
<5>[151895.795562] UBI: number of user volumes:     1
<5>[151895.800110] UBI: available PEBs:             0
<5>[151895.804652] UBI: total number of reserved PEBs: 120
<5>[151895.809636] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[151895.815746] UBI: max/mean erase counter: 4/3
<5>[151895.820119] UBI: image sequence number:  1872325126
<5>[151895.825113] UBI: background thread "ubi_bgt2d" started, PID 9939
<5>[151895.952206] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[151895.958323] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[151895.966031] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[151895.973468] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[151895.979427] UBIFS: default compressor: lzo
<5>[151895.983639] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[151896.203778] UBIFS: un-mount UBI device 2, volume 0
<5>[151896.245401] UBI: mtd6 is detached from ubi2
<5>[173495.672093] UBI: attaching mtd6 to ubi2
<5>[173495.676032] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[173495.682449] UBI: logical eraseblock size:    126976 bytes
<5>[173495.687950] UBI: smallest flash I/O unit:    2048
<5>[173495.692770] UBI: VID header offset:          2048 (aligned 2048)
<5>[173495.698891] UBI: data offset:                4096
<5>[173495.806937] UBI: max. sequence number:       337
<5>[173495.822318] UBI: attached mtd6 to ubi2
<5>[173495.826171] UBI: MTD device name:            "config"
<5>[173495.831348] UBI: MTD device size:            15 MiB
<5>[173495.836325] UBI: number of good PEBs:        120
<5>[173495.841050] UBI: number of bad PEBs:         0
<5>[173495.845592] UBI: number of corrupted PEBs:   0
<5>[173495.850140] UBI: max. allowed volumes:       128
<5>[173495.854856] UBI: wear-leveling threshold:    4096
<5>[173495.859667] UBI: number of internal volumes: 1
<5>[173495.864209] UBI: number of user volumes:     1
<5>[173495.868749] UBI: available PEBs:             0
<5>[173495.873299] UBI: total number of reserved PEBs: 120
<5>[173495.878277] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[173495.884398] UBI: max/mean erase counter: 4/3
<5>[173495.888769] UBI: image sequence number:  1872325126
<5>[173495.893785] UBI: background thread "ubi_bgt2d" started, PID 4395
<5>[173496.018980] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[173496.025097] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[173496.032794] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[173496.040220] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[173496.046156] UBIFS: default compressor: lzo
<5>[173496.050356] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[173496.262247] UBIFS: un-mount UBI device 2, volume 0
<5>[173496.325413] UBI: mtd6 is detached from ubi2
<5>[195095.744844] UBI: attaching mtd6 to ubi2
<5>[195095.748784] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[195095.755206] UBI: logical eraseblock size:    126976 bytes
<5>[195095.760723] UBI: smallest flash I/O unit:    2048
<5>[195095.765528] UBI: VID header offset:          2048 (aligned 2048)
<5>[195095.771647] UBI: data offset:                4096
<5>[195095.882018] UBI: max. sequence number:       338
<5>[195095.897410] UBI: attached mtd6 to ubi2
<5>[195095.901296] UBI: MTD device name:            "config"
<5>[195095.906458] UBI: MTD device size:            15 MiB
<5>[195095.911446] UBI: number of good PEBs:        120
<5>[195095.916162] UBI: number of bad PEBs:         0
<5>[195095.920711] UBI: number of corrupted PEBs:   0
<5>[195095.925252] UBI: max. allowed volumes:       128
<5>[195095.929974] UBI: wear-leveling threshold:    4096
<5>[195095.934777] UBI: number of internal volumes: 1
<5>[195095.939325] UBI: number of user volumes:     1
<5>[195095.943879] UBI: available PEBs:             0
<5>[195095.948424] UBI: total number of reserved PEBs: 120
<5>[195095.953413] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[195095.959530] UBI: max/mean erase counter: 4/3
<5>[195095.963903] UBI: image sequence number:  1872325126
<5>[195095.968967] UBI: background thread "ubi_bgt2d" started, PID 31637
<5>[195096.092861] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[195096.099000] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[195096.106680] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[195096.114106] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[195096.120089] UBIFS: default compressor: lzo
<5>[195096.124290] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[195096.336170] UBIFS: un-mount UBI device 2, volume 0
<5>[195096.411703] UBI: mtd6 is detached from ubi2
<5>[208668.088545] rpc-srv/tcp: nfsd: sent only 28804 when sending 32900 bytes - shutting down socket
<5>[216695.829242] UBI: attaching mtd6 to ubi2
<5>[216695.833183] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[216695.839595] UBI: logical eraseblock size:    126976 bytes
<5>[216695.845098] UBI: smallest flash I/O unit:    2048
<5>[216695.849914] UBI: VID header offset:          2048 (aligned 2048)
<5>[216695.856025] UBI: data offset:                4096
<5>[216695.963831] UBI: max. sequence number:       339
<5>[216695.979272] UBI: attached mtd6 to ubi2
<5>[216695.983126] UBI: MTD device name:            "config"
<5>[216695.988292] UBI: MTD device size:            15 MiB
<5>[216695.993290] UBI: number of good PEBs:        120
<5>[216695.998006] UBI: number of bad PEBs:         0
<5>[216696.002573] UBI: number of corrupted PEBs:   0
<5>[216696.007119] UBI: max. allowed volumes:       128
<5>[216696.011852] UBI: wear-leveling threshold:    4096
<5>[216696.016655] UBI: number of internal volumes: 1
<5>[216696.021205] UBI: number of user volumes:     1
<5>[216696.025751] UBI: available PEBs:             0
<5>[216696.030331] UBI: total number of reserved PEBs: 120
<5>[216696.035318] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[216696.041445] UBI: max/mean erase counter: 4/3
<5>[216696.045814] UBI: image sequence number:  1872325126
<5>[216696.052108] UBI: background thread "ubi_bgt2d" started, PID 26278
<5>[216696.176467] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[216696.182604] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[216696.190295] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[216696.197712] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[216696.203656] UBIFS: default compressor: lzo
<5>[216696.207850] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[216696.427879] UBIFS: un-mount UBI device 2, volume 0
<5>[216696.479554] UBI: mtd6 is detached from ubi2
<5>[220120.633351] rpc-srv/tcp: nfsd: sent only 16516 when sending 32900 bytes - shutting down socket
<5>[238295.892855] UBI: attaching mtd6 to ubi2
<5>[238295.896795] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[238295.903222] UBI: logical eraseblock size:    126976 bytes
<5>[238295.908733] UBI: smallest flash I/O unit:    2048
<5>[238295.913566] UBI: VID header offset:          2048 (aligned 2048)
<5>[238295.919681] UBI: data offset:                4096
<5>[238296.027624] UBI: max. sequence number:       340
<5>[238296.043010] UBI: attached mtd6 to ubi2
<5>[238296.046869] UBI: MTD device name:            "config"
<5>[238296.052050] UBI: MTD device size:            15 MiB
<5>[238296.057027] UBI: number of good PEBs:        120
<5>[238296.061752] UBI: number of bad PEBs:         0
<5>[238296.066294] UBI: number of corrupted PEBs:   0
<5>[238296.070842] UBI: max. allowed volumes:       128
<5>[238296.075558] UBI: wear-leveling threshold:    4096
<5>[238296.080370] UBI: number of internal volumes: 1
<5>[238296.084912] UBI: number of user volumes:     1
<5>[238296.089462] UBI: available PEBs:             0
<5>[238296.094003] UBI: total number of reserved PEBs: 120
<5>[238296.098986] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[238296.105096] UBI: max/mean erase counter: 4/3
<5>[238296.109470] UBI: image sequence number:  1872325126
<5>[238296.114463] UBI: background thread "ubi_bgt2d" started, PID 20826
<5>[238296.241644] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[238296.247780] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[238296.255492] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[238296.262921] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[238296.268856] UBIFS: default compressor: lzo
<5>[238296.273060] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[238296.493846] UBIFS: un-mount UBI device 2, volume 0
<5>[238296.555692] UBI: mtd6 is detached from ubi2
<5>[259895.978294] UBI: attaching mtd6 to ubi2
<5>[259895.982267] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[259895.988643] UBI: logical eraseblock size:    126976 bytes
<5>[259895.994163] UBI: smallest flash I/O unit:    2048
<5>[259895.998981] UBI: VID header offset:          2048 (aligned 2048)
<5>[259896.005091] UBI: data offset:                4096
<5>[259896.112941] UBI: max. sequence number:       341
<5>[259896.128334] UBI: attached mtd6 to ubi2
<5>[259896.132227] UBI: MTD device name:            "config"
<5>[259896.137382] UBI: MTD device size:            15 MiB
<5>[259896.142372] UBI: number of good PEBs:        120
<5>[259896.147089] UBI: number of bad PEBs:         0
<5>[259896.151641] UBI: number of corrupted PEBs:   0
<5>[259896.156183] UBI: max. allowed volumes:       128
<5>[259896.160908] UBI: wear-leveling threshold:    4096
<5>[259896.165710] UBI: number of internal volumes: 1
<5>[259896.170272] UBI: number of user volumes:     1
<5>[259896.174813] UBI: available PEBs:             0
<5>[259896.179373] UBI: total number of reserved PEBs: 120
<5>[259896.184354] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[259896.190480] UBI: max/mean erase counter: 4/3
<5>[259896.194853] UBI: image sequence number:  1872325126
<5>[259896.199870] UBI: background thread "ubi_bgt2d" started, PID 15338
<5>[259896.322827] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[259896.328967] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[259896.336653] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[259896.344088] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[259896.350037] UBIFS: default compressor: lzo
<5>[259896.354232] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[259896.567798] UBIFS: un-mount UBI device 2, volume 0
<5>[259896.635361] UBI: mtd6 is detached from ubi2
<5>[281496.068534] UBI: attaching mtd6 to ubi2
<5>[281496.072521] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[281496.078916] UBI: logical eraseblock size:    126976 bytes
<5>[281496.084415] UBI: smallest flash I/O unit:    2048
<5>[281496.089229] UBI: VID header offset:          2048 (aligned 2048)
<5>[281496.095338] UBI: data offset:                4096
<5>[281496.203094] UBI: max. sequence number:       342
<5>[281496.218463] UBI: attached mtd6 to ubi2
<5>[281496.222345] UBI: MTD device name:            "config"
<5>[281496.227504] UBI: MTD device size:            15 MiB
<5>[281496.232501] UBI: number of good PEBs:        120
<5>[281496.237218] UBI: number of bad PEBs:         0
<5>[281496.241766] UBI: number of corrupted PEBs:   0
<5>[281496.246308] UBI: max. allowed volumes:       128
<5>[281496.251031] UBI: wear-leveling threshold:    4096
<5>[281496.255835] UBI: number of internal volumes: 1
<5>[281496.260382] UBI: number of user volumes:     1
<5>[281496.264923] UBI: available PEBs:             0
<5>[281496.269470] UBI: total number of reserved PEBs: 120
<5>[281496.274448] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[281496.280565] UBI: max/mean erase counter: 4/3
<5>[281496.284932] UBI: image sequence number:  1872325126
<5>[281496.289946] UBI: background thread "ubi_bgt2d" started, PID 10595
<5>[281496.422409] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[281496.428537] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[281496.436238] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[281496.443677] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[281496.449635] UBIFS: default compressor: lzo
<5>[281496.453838] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[281496.669161] UBIFS: un-mount UBI device 2, volume 0
<5>[281496.715680] UBI: mtd6 is detached from ubi2
<5>[303096.117769] UBI: attaching mtd6 to ubi2
<5>[303096.121748] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[303096.128120] UBI: logical eraseblock size:    126976 bytes
<5>[303096.133632] UBI: smallest flash I/O unit:    2048
<5>[303096.138441] UBI: VID header offset:          2048 (aligned 2048)
<5>[303096.144559] UBI: data offset:                4096
<5>[303096.252757] UBI: max. sequence number:       343
<5>[303096.268147] UBI: attached mtd6 to ubi2
<5>[303096.272034] UBI: MTD device name:            "config"
<5>[303096.277188] UBI: MTD device size:            15 MiB
<5>[303096.282175] UBI: number of good PEBs:        120
<5>[303096.286890] UBI: number of bad PEBs:         0
<5>[303096.291436] UBI: number of corrupted PEBs:   0
<5>[303096.295977] UBI: max. allowed volumes:       128
<5>[303096.300702] UBI: wear-leveling threshold:    4096
<5>[303096.305580] UBI: number of internal volumes: 1
<5>[303096.310136] UBI: number of user volumes:     1
<5>[303096.314679] UBI: available PEBs:             0
<5>[303096.319227] UBI: total number of reserved PEBs: 120
<5>[303096.324209] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[303096.330333] UBI: max/mean erase counter: 4/3
<5>[303096.334710] UBI: image sequence number:  1872325126
<5>[303096.339749] UBI: background thread "ubi_bgt2d" started, PID 5595
<5>[303096.468993] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[303096.475121] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[303096.482824] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[303096.490255] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[303096.496190] UBIFS: default compressor: lzo
<5>[303096.500402] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[303096.713008] UBIFS: un-mount UBI device 2, volume 0
<5>[303096.765559] UBI: mtd6 is detached from ubi2
<5>[324696.189966] UBI: attaching mtd6 to ubi2
<5>[324696.193916] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[324696.200314] UBI: logical eraseblock size:    126976 bytes
<5>[324696.205815] UBI: smallest flash I/O unit:    2048
<5>[324696.210625] UBI: VID header offset:          2048 (aligned 2048)
<5>[324696.216734] UBI: data offset:                4096
<5>[324696.325551] UBI: max. sequence number:       344
<5>[324696.340943] UBI: attached mtd6 to ubi2
<5>[324696.344827] UBI: MTD device name:            "config"
<5>[324696.350029] UBI: MTD device size:            15 MiB
<5>[324696.355024] UBI: number of good PEBs:        120
<5>[324696.359761] UBI: number of bad PEBs:         0
<5>[324696.364303] UBI: number of corrupted PEBs:   0
<5>[324696.368843] UBI: max. allowed volumes:       128
<5>[324696.373566] UBI: wear-leveling threshold:    4096
<5>[324696.378368] UBI: number of internal volumes: 1
<5>[324696.382915] UBI: number of user volumes:     1
<5>[324696.387456] UBI: available PEBs:             0
<5>[324696.392010] UBI: total number of reserved PEBs: 120
<5>[324696.396987] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[324696.403103] UBI: max/mean erase counter: 4/3
<5>[324696.407470] UBI: image sequence number:  1872325126
<5>[324696.412481] UBI: background thread "ubi_bgt2d" started, PID 626
<5>[324696.535931] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[324696.542070] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[324696.549763] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[324696.557179] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[324696.563132] UBIFS: default compressor: lzo
<5>[324696.567327] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[324696.778776] UBIFS: un-mount UBI device 2, volume 0
<5>[324696.845505] UBI: mtd6 is detached from ubi2
<5>[346296.265893] UBI: attaching mtd6 to ubi2
<5>[346296.269873] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[346296.276248] UBI: logical eraseblock size:    126976 bytes
<5>[346296.281785] UBI: smallest flash I/O unit:    2048
<5>[346296.286596] UBI: VID header offset:          2048 (aligned 2048)
<5>[346296.292718] UBI: data offset:                4096
<5>[346296.400521] UBI: max. sequence number:       345
<5>[346296.415961] UBI: attached mtd6 to ubi2
<5>[346296.419847] UBI: MTD device name:            "config"
<5>[346296.425002] UBI: MTD device size:            15 MiB
<5>[346296.429988] UBI: number of good PEBs:        120
<5>[346296.434705] UBI: number of bad PEBs:         0
<5>[346296.439258] UBI: number of corrupted PEBs:   0
<5>[346296.443800] UBI: max. allowed volumes:       128
<5>[346296.448515] UBI: wear-leveling threshold:    4096
<5>[346296.453327] UBI: number of internal volumes: 1
<5>[346296.457868] UBI: number of user volumes:     1
<5>[346296.462415] UBI: available PEBs:             0
<5>[346296.466957] UBI: total number of reserved PEBs: 120
<5>[346296.472007] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[346296.478118] UBI: max/mean erase counter: 4/3
<5>[346296.482498] UBI: image sequence number:  1872325126
<5>[346296.487493] UBI: background thread "ubi_bgt2d" started, PID 27837
<5>[346296.608400] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[346296.614547] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[346296.622255] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[346296.629689] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[346296.635625] UBIFS: default compressor: lzo
<5>[346296.639831] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[346296.860934] UBIFS: un-mount UBI device 2, volume 0
<5>[346296.915373] UBI: mtd6 is detached from ubi2
<5>[367896.356606] UBI: attaching mtd6 to ubi2
<5>[367896.360588] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[367896.366961] UBI: logical eraseblock size:    126976 bytes
<5>[367896.372472] UBI: smallest flash I/O unit:    2048
<5>[367896.377276] UBI: VID header offset:          2048 (aligned 2048)
<5>[367896.383393] UBI: data offset:                4096
<5>[367896.491231] UBI: max. sequence number:       346
<5>[367896.506708] UBI: attached mtd6 to ubi2
<5>[367896.510597] UBI: MTD device name:            "config"
<5>[367896.515752] UBI: MTD device size:            15 MiB
<5>[367896.520745] UBI: number of good PEBs:        120
<5>[367896.525465] UBI: number of bad PEBs:         0
<5>[367896.530019] UBI: number of corrupted PEBs:   0
<5>[367896.534561] UBI: max. allowed volumes:       128
<5>[367896.539284] UBI: wear-leveling threshold:    4096
<5>[367896.544087] UBI: number of internal volumes: 1
<5>[367896.548627] UBI: number of user volumes:     1
<5>[367896.553174] UBI: available PEBs:             0
<5>[367896.557716] UBI: total number of reserved PEBs: 120
<5>[367896.562707] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[367896.568817] UBI: max/mean erase counter: 4/3
<5>[367896.573196] UBI: image sequence number:  1872325126
<5>[367896.578185] UBI: background thread "ubi_bgt2d" started, PID 22481
<5>[367896.700345] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[367896.706462] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[367896.714161] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[367896.721592] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[367896.727541] UBIFS: default compressor: lzo
<5>[367896.731747] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[367896.945552] UBIFS: un-mount UBI device 2, volume 0
<5>[367897.010244] UBI: mtd6 is detached from ubi2
<5>[389496.419481] UBI: attaching mtd6 to ubi2
<5>[389496.423422] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[389496.429830] UBI: logical eraseblock size:    126976 bytes
<5>[389496.435333] UBI: smallest flash I/O unit:    2048
<5>[389496.440153] UBI: VID header offset:          2048 (aligned 2048)
<5>[389496.446263] UBI: data offset:                4096
<5>[389496.554089] UBI: max. sequence number:       347
<5>[389496.569438] UBI: attached mtd6 to ubi2
<5>[389496.573294] UBI: MTD device name:            "config"
<5>[389496.578448] UBI: MTD device size:            15 MiB
<5>[389496.583458] UBI: number of good PEBs:        120
<5>[389496.588182] UBI: number of bad PEBs:         0
<5>[389496.592741] UBI: number of corrupted PEBs:   0
<5>[389496.597285] UBI: max. allowed volumes:       128
<5>[389496.602012] UBI: wear-leveling threshold:    4096
<5>[389496.606816] UBI: number of internal volumes: 1
<5>[389496.611366] UBI: number of user volumes:     1
<5>[389496.615907] UBI: available PEBs:             0
<5>[389496.620459] UBI: total number of reserved PEBs: 120
<5>[389496.625436] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[389496.631553] UBI: max/mean erase counter: 4/3
<5>[389496.635925] UBI: image sequence number:  1872325126
<5>[389496.640962] UBI: background thread "ubi_bgt2d" started, PID 17006
<5>[389496.768221] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[389496.774373] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[389496.782073] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[389496.789498] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[389496.795434] UBIFS: default compressor: lzo
<5>[389496.799640] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[389497.008967] UBIFS: un-mount UBI device 2, volume 0
<5>[389497.055368] UBI: mtd6 is detached from ubi2
<5>[411096.493637] UBI: attaching mtd6 to ubi2
<5>[411096.497577] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[411096.503985] UBI: logical eraseblock size:    126976 bytes
<5>[411096.509504] UBI: smallest flash I/O unit:    2048
<5>[411096.514307] UBI: VID header offset:          2048 (aligned 2048)
<5>[411096.520430] UBI: data offset:                4096
<5>[411096.628224] UBI: max. sequence number:       348
<5>[411096.643610] UBI: attached mtd6 to ubi2
<5>[411096.647464] UBI: MTD device name:            "config"
<5>[411096.652644] UBI: MTD device size:            15 MiB
<5>[411096.657622] UBI: number of good PEBs:        120
<5>[411096.662347] UBI: number of bad PEBs:         0
<5>[411096.666889] UBI: number of corrupted PEBs:   0
<5>[411096.671437] UBI: max. allowed volumes:       128
<5>[411096.676159] UBI: wear-leveling threshold:    4096
<5>[411096.680970] UBI: number of internal volumes: 1
<5>[411096.685512] UBI: number of user volumes:     1
<5>[411096.690059] UBI: available PEBs:             0
<5>[411096.694600] UBI: total number of reserved PEBs: 120
<5>[411096.699583] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[411096.705693] UBI: max/mean erase counter: 4/3
<5>[411096.710068] UBI: image sequence number:  1872325126
<5>[411096.715061] UBI: background thread "ubi_bgt2d" started, PID 12078
<5>[411096.836917] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[411096.843059] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[411096.850754] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[411096.858170] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[411096.864118] UBIFS: default compressor: lzo
<5>[411096.868312] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[411097.081614] UBIFS: un-mount UBI device 2, volume 0
<5>[411097.135447] UBI: mtd6 is detached from ubi2
<5>[432696.604490] UBI: attaching mtd6 to ubi2
<5>[432696.608429] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[432696.614840] UBI: logical eraseblock size:    126976 bytes
<5>[432696.620354] UBI: smallest flash I/O unit:    2048
<5>[432696.625321] UBI: VID header offset:          2048 (aligned 2048)
<5>[432696.631455] UBI: data offset:                4096
<5>[432696.739413] UBI: max. sequence number:       349
<5>[432696.754887] UBI: attached mtd6 to ubi2
<5>[432696.758739] UBI: MTD device name:            "config"
<5>[432696.763935] UBI: MTD device size:            15 MiB
<5>[432696.768948] UBI: number of good PEBs:        120
<5>[432696.773684] UBI: number of bad PEBs:         0
<5>[432696.778230] UBI: number of corrupted PEBs:   0
<5>[432696.782795] UBI: max. allowed volumes:       128
<5>[432696.787515] UBI: wear-leveling threshold:    4096
<5>[432696.792336] UBI: number of internal volumes: 1
<5>[432696.796884] UBI: number of user volumes:     1
<5>[432696.801440] UBI: available PEBs:             0
<5>[432696.805982] UBI: total number of reserved PEBs: 120
<5>[432696.810987] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[432696.817099] UBI: max/mean erase counter: 5/3
<5>[432696.821492] UBI: image sequence number:  1872325126
<5>[432696.826484] UBI: background thread "ubi_bgt2d" started, PID 17991
<5>[432696.974633] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[432696.980769] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[432696.988448] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[432696.995900] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[432697.001855] UBIFS: default compressor: lzo
<5>[432697.006050] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[432697.269368] UBIFS: un-mount UBI device 2, volume 0
<5>[432697.329042] UBI: mtd6 is detached from ubi2
<5>[454296.688406] UBI: attaching mtd6 to ubi2
<5>[454296.692383] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[454296.698763] UBI: logical eraseblock size:    126976 bytes
<5>[454296.704284] UBI: smallest flash I/O unit:    2048
<5>[454296.709100] UBI: VID header offset:          2048 (aligned 2048)
<5>[454296.715209] UBI: data offset:                4096
<5>[454296.822979] UBI: max. sequence number:       350
<5>[454296.838631] UBI: attached mtd6 to ubi2
<5>[454296.842527] UBI: MTD device name:            "config"
<5>[454296.847681] UBI: MTD device size:            15 MiB
<5>[454296.852671] UBI: number of good PEBs:        120
<5>[454296.857387] UBI: number of bad PEBs:         0
<5>[454296.861939] UBI: number of corrupted PEBs:   0
<5>[454296.866481] UBI: max. allowed volumes:       128
<5>[454296.871205] UBI: wear-leveling threshold:    4096
<5>[454296.876008] UBI: number of internal volumes: 1
<5>[454296.880561] UBI: number of user volumes:     1
<5>[454296.885102] UBI: available PEBs:             0
<5>[454296.889651] UBI: total number of reserved PEBs: 120
<5>[454296.894628] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[454296.900745] UBI: max/mean erase counter: 5/3
<5>[454296.905114] UBI: image sequence number:  1872325126
<5>[454296.910133] UBI: background thread "ubi_bgt2d" started, PID 12856
<5>[454297.050224] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[454297.056341] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[454297.064037] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[454297.071467] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[454297.077402] UBIFS: default compressor: lzo
<5>[454297.081604] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[454297.291611] UBIFS: un-mount UBI device 2, volume 0
<5>[454297.359851] UBI: mtd6 is detached from ubi2
<5>[475896.761768] UBI: attaching mtd6 to ubi2
<5>[475896.765708] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[475896.772109] UBI: logical eraseblock size:    126976 bytes
<5>[475896.777611] UBI: smallest flash I/O unit:    2048
<5>[475896.782436] UBI: VID header offset:          2048 (aligned 2048)
<5>[475896.788546] UBI: data offset:                4096
<5>[475896.896377] UBI: max. sequence number:       351
<5>[475896.911844] UBI: attached mtd6 to ubi2
<5>[475896.915699] UBI: MTD device name:            "config"
<5>[475896.920877] UBI: MTD device size:            15 MiB
<5>[475896.925863] UBI: number of good PEBs:        120
<5>[475896.930588] UBI: number of bad PEBs:         0
<5>[475896.935130] UBI: number of corrupted PEBs:   0
<5>[475896.939679] UBI: max. allowed volumes:       128
<5>[475896.944394] UBI: wear-leveling threshold:    4096
<5>[475896.949204] UBI: number of internal volumes: 1
<5>[475896.953746] UBI: number of user volumes:     1
<5>[475896.958286] UBI: available PEBs:             0
<5>[475896.962839] UBI: total number of reserved PEBs: 120
<5>[475896.967825] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[475896.973969] UBI: max/mean erase counter: 5/3
<5>[475896.978342] UBI: image sequence number:  1872325126
<5>[475896.983362] UBI: background thread "ubi_bgt2d" started, PID 7755
<5>[475897.107277] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[475897.113420] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[475897.121111] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[475897.128528] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[475897.134475] UBIFS: default compressor: lzo
<5>[475897.138672] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[475897.363622] UBIFS: un-mount UBI device 2, volume 0
<5>[475897.445636] UBI: mtd6 is detached from ubi2
<5>[497496.839944] UBI: attaching mtd6 to ubi2
<5>[497496.843884] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[497496.850287] UBI: logical eraseblock size:    126976 bytes
<5>[497496.855788] UBI: smallest flash I/O unit:    2048
<5>[497496.860605] UBI: VID header offset:          2048 (aligned 2048)
<5>[497496.866784] UBI: data offset:                4096
<5>[497496.976788] UBI: max. sequence number:       352
<5>[497496.992195] UBI: attached mtd6 to ubi2
<5>[497496.996049] UBI: MTD device name:            "config"
<5>[497497.001246] UBI: MTD device size:            15 MiB
<5>[497497.006224] UBI: number of good PEBs:        120
<5>[497497.010957] UBI: number of bad PEBs:         0
<5>[497497.015501] UBI: number of corrupted PEBs:   0
<5>[497497.020054] UBI: max. allowed volumes:       128
<5>[497497.024770] UBI: wear-leveling threshold:    4096
<5>[497497.029598] UBI: number of internal volumes: 1
<5>[497497.034145] UBI: number of user volumes:     1
<5>[497497.038692] UBI: available PEBs:             0
<5>[497497.043251] UBI: total number of reserved PEBs: 120
<5>[497497.048228] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[497497.054350] UBI: max/mean erase counter: 5/3
<5>[497497.058720] UBI: image sequence number:  1872325126
<5>[497497.063994] UBI: background thread "ubi_bgt2d" started, PID 2616
<5>[497497.187489] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[497497.193655] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[497497.201363] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[497497.208783] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[497497.214739] UBIFS: default compressor: lzo
<5>[497497.218943] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[497497.429647] UBIFS: un-mount UBI device 2, volume 0
<5>[497497.479026] UBI: mtd6 is detached from ubi2
<5>[519096.926158] UBI: attaching mtd6 to ubi2
<5>[519096.930138] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[519096.936517] UBI: logical eraseblock size:    126976 bytes
<5>[519096.942033] UBI: smallest flash I/O unit:    2048
<5>[519096.946838] UBI: VID header offset:          2048 (aligned 2048)
<5>[519096.952959] UBI: data offset:                4096
<5>[519097.061329] UBI: max. sequence number:       353
<5>[519097.076694] UBI: attached mtd6 to ubi2
<5>[519097.080574] UBI: MTD device name:            "config"
<5>[519097.085729] UBI: MTD device size:            15 MiB
<5>[519097.090717] UBI: number of good PEBs:        120
<5>[519097.095508] UBI: number of bad PEBs:         0
<5>[519097.100223] UBI: number of corrupted PEBs:   0
<5>[519097.104771] UBI: max. allowed volumes:       128
<5>[519097.109505] UBI: wear-leveling threshold:    4096
<5>[519097.114309] UBI: number of internal volumes: 1
<5>[519097.118850] UBI: number of user volumes:     1
<5>[519097.123400] UBI: available PEBs:             0
<5>[519097.127942] UBI: total number of reserved PEBs: 120
<5>[519097.132926] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[519097.139045] UBI: max/mean erase counter: 5/3
<5>[519097.143413] UBI: image sequence number:  1872325126
<5>[519097.148402] UBI: background thread "ubi_bgt2d" started, PID 29908
<5>[519097.274920] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[519097.281084] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[519097.288772] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[519097.296221] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[519097.302190] UBIFS: default compressor: lzo
<5>[519097.306390] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[519097.519598] UBIFS: un-mount UBI device 2, volume 0
<5>[519097.589405] UBI: mtd6 is detached from ubi2
<5>[540696.988521] UBI: attaching mtd6 to ubi2
<5>[540696.992490] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[540696.998861] UBI: logical eraseblock size:    126976 bytes
<5>[540697.004412] UBI: smallest flash I/O unit:    2048
<5>[540697.009236] UBI: VID header offset:          2048 (aligned 2048)
<5>[540697.015345] UBI: data offset:                4096
<5>[540697.123641] UBI: max. sequence number:       357
<5>[540697.139019] UBI: attached mtd6 to ubi2
<5>[540697.142873] UBI: MTD device name:            "config"
<5>[540697.148026] UBI: MTD device size:            15 MiB
<5>[540697.153032] UBI: number of good PEBs:        120
<5>[540697.157753] UBI: number of bad PEBs:         0
<5>[540697.162313] UBI: number of corrupted PEBs:   0
<5>[540697.166856] UBI: max. allowed volumes:       128
<5>[540697.171584] UBI: wear-leveling threshold:    4096
<5>[540697.176388] UBI: number of internal volumes: 1
<5>[540697.180940] UBI: number of user volumes:     1
<5>[540697.185482] UBI: available PEBs:             0
<5>[540697.190035] UBI: total number of reserved PEBs: 120
<5>[540697.195013] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[540697.201131] UBI: max/mean erase counter: 5/3
<5>[540697.205499] UBI: image sequence number:  1872325126
<5>[540697.210568] UBI: background thread "ubi_bgt2d" started, PID 24680
<5>[540697.339803] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[540697.345931] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[540697.353650] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[540697.361092] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[540697.367031] UBIFS: default compressor: lzo
<5>[540697.371234] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[540697.583835] UBIFS: un-mount UBI device 2, volume 0
<5>[540697.649552] UBI: mtd6 is detached from ubi2
<5>[562297.057960] UBI: attaching mtd6 to ubi2
<5>[562297.061937] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[562297.068310] UBI: logical eraseblock size:    126976 bytes
<5>[562297.073823] UBI: smallest flash I/O unit:    2048
<5>[562297.078628] UBI: VID header offset:          2048 (aligned 2048)
<5>[562297.084748] UBI: data offset:                4096
<5>[562297.192551] UBI: max. sequence number:       358
<5>[562297.207923] UBI: attached mtd6 to ubi2
<5>[562297.211812] UBI: MTD device name:            "config"
<5>[562297.216965] UBI: MTD device size:            15 MiB
<5>[562297.221951] UBI: number of good PEBs:        120
<5>[562297.226667] UBI: number of bad PEBs:         0
<5>[562297.231215] UBI: number of corrupted PEBs:   0
<5>[562297.235757] UBI: max. allowed volumes:       128
<5>[562297.240480] UBI: wear-leveling threshold:    4096
<5>[562297.245283] UBI: number of internal volumes: 1
<5>[562297.249830] UBI: number of user volumes:     1
<5>[562297.254376] UBI: available PEBs:             0
<5>[562297.258938] UBI: total number of reserved PEBs: 120
<5>[562297.263924] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[562297.270056] UBI: max/mean erase counter: 5/3
<5>[562297.274446] UBI: image sequence number:  1872325126
<5>[562297.284354] UBI: background thread "ubi_bgt2d" started, PID 19624
<5>[562297.415232] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[562297.421375] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[562297.429065] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[562297.436489] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[562297.442441] UBIFS: default compressor: lzo
<5>[562297.446636] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[562297.656724] UBIFS: un-mount UBI device 2, volume 0
<5>[562297.725383] UBI: mtd6 is detached from ubi2
<5>[583897.134789] UBI: attaching mtd6 to ubi2
<5>[583897.138729] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[583897.145152] UBI: logical eraseblock size:    126976 bytes
<5>[583897.150665] UBI: smallest flash I/O unit:    2048
<5>[583897.155468] UBI: VID header offset:          2048 (aligned 2048)
<5>[583897.161583] UBI: data offset:                4096
<5>[583897.269440] UBI: max. sequence number:       359
<5>[583897.284817] UBI: attached mtd6 to ubi2
<5>[583897.288676] UBI: MTD device name:            "config"
<5>[583897.293875] UBI: MTD device size:            15 MiB
<5>[583897.298861] UBI: number of good PEBs:        120
<5>[583897.303592] UBI: number of bad PEBs:         0
<5>[583897.308134] UBI: number of corrupted PEBs:   0
<5>[583897.312689] UBI: max. allowed volumes:       128
<5>[583897.317406] UBI: wear-leveling threshold:    4096
<5>[583897.322220] UBI: number of internal volumes: 1
<5>[583897.326767] UBI: number of user volumes:     1
<5>[583897.331320] UBI: available PEBs:             0
<5>[583897.335863] UBI: total number of reserved PEBs: 120
<5>[583897.340848] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[583897.346962] UBI: max/mean erase counter: 5/3
<5>[583897.351342] UBI: image sequence number:  1872325126
<5>[583897.356333] UBI: background thread "ubi_bgt2d" started, PID 16135
<5>[583897.478548] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[583897.484696] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[583897.492389] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[583897.499818] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[583897.505764] UBIFS: default compressor: lzo
<5>[583897.509975] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[583897.724220] UBIFS: un-mount UBI device 2, volume 0
<5>[583897.795408] UBI: mtd6 is detached from ubi2
<5>[605497.204841] UBI: attaching mtd6 to ubi2
<5>[605497.208832] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[605497.215233] UBI: logical eraseblock size:    126976 bytes
<5>[605497.220751] UBI: smallest flash I/O unit:    2048
<5>[605497.225555] UBI: VID header offset:          2048 (aligned 2048)
<5>[605497.231676] UBI: data offset:                4096
<5>[605497.339899] UBI: max. sequence number:       360
<5>[605497.355267] UBI: attached mtd6 to ubi2
<5>[605497.359188] UBI: MTD device name:            "config"
<5>[605497.364342] UBI: MTD device size:            15 MiB
<5>[605497.369333] UBI: number of good PEBs:        120
<5>[605497.374049] UBI: number of bad PEBs:         0
<5>[605497.378601] UBI: number of corrupted PEBs:   0
<5>[605497.383151] UBI: max. allowed volumes:       128
<5>[605497.387906] UBI: wear-leveling threshold:    4096
<5>[605497.392714] UBI: number of internal volumes: 1
<5>[605497.397256] UBI: number of user volumes:     1
<5>[605497.401817] UBI: available PEBs:             0
<5>[605497.406358] UBI: total number of reserved PEBs: 120
<5>[605497.411344] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[605497.417462] UBI: max/mean erase counter: 5/3
<5>[605497.421831] UBI: image sequence number:  1872325126
<5>[605497.426835] UBI: background thread "ubi_bgt2d" started, PID 10571
<5>[605497.551999] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[605497.558184] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[605497.565873] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[605497.573311] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[605497.579267] UBIFS: default compressor: lzo
<5>[605497.583462] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[605497.799487] UBIFS: un-mount UBI device 2, volume 0
<5>[605497.868137] UBI: mtd6 is detached from ubi2
<5>[627097.331432] UBI: attaching mtd6 to ubi2
<5>[627097.335372] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[627097.341784] UBI: logical eraseblock size:    126976 bytes
<5>[627097.347286] UBI: smallest flash I/O unit:    2048
<5>[627097.352108] UBI: VID header offset:          2048 (aligned 2048)
<5>[627097.358228] UBI: data offset:                4096
<5>[627097.466020] UBI: max. sequence number:       361
<5>[627097.481459] UBI: attached mtd6 to ubi2
<5>[627097.485314] UBI: MTD device name:            "config"
<5>[627097.490492] UBI: MTD device size:            15 MiB
<5>[627097.495475] UBI: number of good PEBs:        120
<5>[627097.500205] UBI: number of bad PEBs:         0
<5>[627097.504746] UBI: number of corrupted PEBs:   0
<5>[627097.509295] UBI: max. allowed volumes:       128
<5>[627097.514010] UBI: wear-leveling threshold:    4096
<5>[627097.518820] UBI: number of internal volumes: 1
<5>[627097.523361] UBI: number of user volumes:     1
<5>[627097.527908] UBI: available PEBs:             0
<5>[627097.532450] UBI: total number of reserved PEBs: 120
<5>[627097.537427] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[627097.543558] UBI: max/mean erase counter: 5/3
<5>[627097.547955] UBI: image sequence number:  1872325126
<5>[627097.552973] UBI: background thread "ubi_bgt2d" started, PID 5412
<5>[627097.676932] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[627097.683070] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[627097.690761] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[627097.698189] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[627097.704124] UBIFS: default compressor: lzo
<5>[627097.708326] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[627097.923168] UBIFS: un-mount UBI device 2, volume 0
<5>[627097.988139] UBI: mtd6 is detached from ubi2
<5>[648697.412364] UBI: attaching mtd6 to ubi2
<5>[648697.416304] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[648697.422717] UBI: logical eraseblock size:    126976 bytes
<5>[648697.428232] UBI: smallest flash I/O unit:    2048
<5>[648697.433040] UBI: VID header offset:          2048 (aligned 2048)
<5>[648697.439159] UBI: data offset:                4096
<5>[648697.546944] UBI: max. sequence number:       362
<5>[648697.562322] UBI: attached mtd6 to ubi2
<5>[648697.566176] UBI: MTD device name:            "config"
<5>[648697.571348] UBI: MTD device size:            15 MiB
<5>[648697.576325] UBI: number of good PEBs:        120
<5>[648697.581048] UBI: number of bad PEBs:         0
<5>[648697.585589] UBI: number of corrupted PEBs:   0
<5>[648697.590134] UBI: max. allowed volumes:       128
<5>[648697.594849] UBI: wear-leveling threshold:    4096
<5>[648697.599662] UBI: number of internal volumes: 1
<5>[648697.604204] UBI: number of user volumes:     1
<5>[648697.608751] UBI: available PEBs:             0
<5>[648697.613291] UBI: total number of reserved PEBs: 120
<5>[648697.618276] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[648697.624385] UBI: max/mean erase counter: 5/3
<5>[648697.628758] UBI: image sequence number:  1872325126
<5>[648697.633750] UBI: background thread "ubi_bgt2d" started, PID 10305
<5>[648705.642067] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[648705.648202] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[648705.655882] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[648705.663305] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[648705.669321] UBIFS: default compressor: lzo
<5>[648705.673548] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[648705.983332] UBIFS: un-mount UBI device 2, volume 0
<5>[648706.038184] UBI: mtd6 is detached from ubi2
<5>[670297.485139] UBI: attaching mtd6 to ubi2
<5>[670297.489128] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[670297.495500] UBI: logical eraseblock size:    126976 bytes
<5>[670297.501018] UBI: smallest flash I/O unit:    2048
<5>[670297.505894] UBI: VID header offset:          2048 (aligned 2048)
<5>[670297.512020] UBI: data offset:                4096
<5>[670297.622042] UBI: max. sequence number:       363
<5>[670297.637426] UBI: attached mtd6 to ubi2
<5>[670297.641321] UBI: MTD device name:            "config"
<5>[670297.646475] UBI: MTD device size:            15 MiB
<5>[670297.651476] UBI: number of good PEBs:        120
<5>[670297.656192] UBI: number of bad PEBs:         0
<5>[670297.660746] UBI: number of corrupted PEBs:   0
<5>[670297.665288] UBI: max. allowed volumes:       128
<5>[670297.670013] UBI: wear-leveling threshold:    4096
<5>[670297.674818] UBI: number of internal volumes: 1
<5>[670297.679392] UBI: number of user volumes:     1
<5>[670297.683942] UBI: available PEBs:             0
<5>[670297.688508] UBI: total number of reserved PEBs: 120
<5>[670297.693486] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[670297.699608] UBI: max/mean erase counter: 5/3
<5>[670297.703976] UBI: image sequence number:  1872325126
<5>[670297.709201] UBI: background thread "ubi_bgt2d" started, PID 5071
<5>[670297.833031] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[670297.839168] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[670297.846852] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[670297.854281] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[670297.860227] UBIFS: default compressor: lzo
<5>[670297.864421] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[670298.075045] UBIFS: un-mount UBI device 2, volume 0
<5>[670298.144347] UBI: mtd6 is detached from ubi2
<5>[691897.555412] UBI: attaching mtd6 to ubi2
<5>[691897.559400] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[691897.565772] UBI: logical eraseblock size:    126976 bytes
<5>[691897.571284] UBI: smallest flash I/O unit:    2048
<5>[691897.576088] UBI: VID header offset:          2048 (aligned 2048)
<5>[691897.582210] UBI: data offset:                4096
<5>[691897.689987] UBI: max. sequence number:       364
<5>[691897.705368] UBI: attached mtd6 to ubi2
<5>[691897.709259] UBI: MTD device name:            "config"
<5>[691897.714413] UBI: MTD device size:            15 MiB
<5>[691897.719399] UBI: number of good PEBs:        120
<5>[691897.724115] UBI: number of bad PEBs:         0
<5>[691897.728663] UBI: number of corrupted PEBs:   0
<5>[691897.733204] UBI: max. allowed volumes:       128
<5>[691897.737927] UBI: wear-leveling threshold:    4096
<5>[691897.742730] UBI: number of internal volumes: 1
<5>[691897.747271] UBI: number of user volumes:     1
<5>[691897.751820] UBI: available PEBs:             0
<5>[691897.756362] UBI: total number of reserved PEBs: 120
<5>[691897.761350] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[691897.767467] UBI: max/mean erase counter: 5/3
<5>[691897.771835] UBI: image sequence number:  1872325126
<5>[691897.776825] UBI: background thread "ubi_bgt2d" started, PID 32362
<5>[691897.904224] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[691897.910398] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[691897.918107] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[691897.925534] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[691897.931504] UBIFS: default compressor: lzo
<5>[691897.935709] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[691898.149258] UBIFS: un-mount UBI device 2, volume 0
<5>[691898.218119] UBI: mtd6 is detached from ubi2
<5>[713497.627465] UBI: attaching mtd6 to ubi2
<5>[713497.631407] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[713497.637798] UBI: logical eraseblock size:    126976 bytes
<5>[713497.643298] UBI: smallest flash I/O unit:    2048
<5>[713497.648114] UBI: VID header offset:          2048 (aligned 2048)
<5>[713497.654224] UBI: data offset:                4096
<5>[713497.764386] UBI: max. sequence number:       365
<5>[713497.781784] UBI: attached mtd6 to ubi2
<5>[713497.785673] UBI: MTD device name:            "config"
<5>[713497.790887] UBI: MTD device size:            15 MiB
<5>[713497.795867] UBI: number of good PEBs:        120
<5>[713497.800599] UBI: number of bad PEBs:         0
<5>[713497.805141] UBI: number of corrupted PEBs:   0
<5>[713497.809692] UBI: max. allowed volumes:       128
<5>[713497.814408] UBI: wear-leveling threshold:    4096
<5>[713497.819220] UBI: number of internal volumes: 1
<5>[713497.823762] UBI: number of user volumes:     1
<5>[713497.828317] UBI: available PEBs:             0
<5>[713497.832877] UBI: total number of reserved PEBs: 120
<5>[713497.837881] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[713497.844005] UBI: max/mean erase counter: 5/3
<5>[713497.848402] UBI: image sequence number:  1872325126
<5>[713497.853394] UBI: background thread "ubi_bgt2d" started, PID 27698
<5>[713497.981365] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[713497.987509] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[713497.995197] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[713498.002627] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[713498.008575] UBIFS: default compressor: lzo
<5>[713498.012775] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[713498.223702] UBIFS: un-mount UBI device 2, volume 0
<5>[713498.284642] UBI: mtd6 is detached from ubi2
<5>[735097.706922] UBI: attaching mtd6 to ubi2
<5>[735097.710910] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[735097.717283] UBI: logical eraseblock size:    126976 bytes
<5>[735097.722794] UBI: smallest flash I/O unit:    2048
<5>[735097.727680] UBI: VID header offset:          2048 (aligned 2048)
<5>[735097.733799] UBI: data offset:                4096
<5>[735097.841644] UBI: max. sequence number:       366
<5>[735097.857041] UBI: attached mtd6 to ubi2
<5>[735097.860922] UBI: MTD device name:            "config"
<5>[735097.866077] UBI: MTD device size:            15 MiB
<5>[735097.871065] UBI: number of good PEBs:        120
<5>[735097.875781] UBI: number of bad PEBs:         0
<5>[735097.880420] UBI: number of corrupted PEBs:   0
<5>[735097.885019] UBI: max. allowed volumes:       128
<5>[735097.889762] UBI: wear-leveling threshold:    4096
<5>[735097.894567] UBI: number of internal volumes: 1
<5>[735097.899117] UBI: number of user volumes:     1
<5>[735097.903659] UBI: available PEBs:             0
<5>[735097.908208] UBI: total number of reserved PEBs: 120
<5>[735097.913185] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[735097.919300] UBI: max/mean erase counter: 5/3
<5>[735097.923668] UBI: image sequence number:  1872325126
<5>[735097.928680] UBI: background thread "ubi_bgt2d" started, PID 10016
<5>[735098.059354] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[735098.065471] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[735098.073184] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[735098.080626] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[735098.086561] UBIFS: default compressor: lzo
<5>[735098.090765] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[735098.312665] UBIFS: un-mount UBI device 2, volume 0
<5>[735098.374204] UBI: mtd6 is detached from ubi2
<5>[756697.785553] UBI: attaching mtd6 to ubi2
<5>[756697.789533] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[756697.795912] UBI: logical eraseblock size:    126976 bytes
<5>[756697.801429] UBI: smallest flash I/O unit:    2048
<5>[756697.806234] UBI: VID header offset:          2048 (aligned 2048)
<5>[756697.812350] UBI: data offset:                4096
<5>[756697.920149] UBI: max. sequence number:       367
<5>[756697.935537] UBI: attached mtd6 to ubi2
<5>[756697.939426] UBI: MTD device name:            "config"
<5>[756697.944581] UBI: MTD device size:            15 MiB
<5>[756697.949570] UBI: number of good PEBs:        120
<5>[756697.954286] UBI: number of bad PEBs:         0
<5>[756697.958839] UBI: number of corrupted PEBs:   0
<5>[756697.963381] UBI: max. allowed volumes:       128
<5>[756697.968110] UBI: wear-leveling threshold:    4096
<5>[756697.972913] UBI: number of internal volumes: 1
<5>[756697.977463] UBI: number of user volumes:     1
<5>[756697.982004] UBI: available PEBs:             0
<5>[756697.986545] UBI: total number of reserved PEBs: 120
<5>[756697.991528] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[756697.997651] UBI: max/mean erase counter: 5/3
<5>[756698.002019] UBI: image sequence number:  1872325126
<5>[756698.007010] UBI: background thread "ubi_bgt2d" started, PID 4727
<5>[756698.134096] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[756698.140238] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[756698.147930] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[756698.155347] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[756698.161291] UBIFS: default compressor: lzo
<5>[756698.165485] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[756698.379737] UBIFS: un-mount UBI device 2, volume 0
<5>[756698.424080] UBI: mtd6 is detached from ubi2
<5>[778297.856146] UBI: attaching mtd6 to ubi2
<5>[778297.860148] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[778297.866527] UBI: logical eraseblock size:    126976 bytes
<5>[778297.872041] UBI: smallest flash I/O unit:    2048
<5>[778297.876846] UBI: VID header offset:          2048 (aligned 2048)
<5>[778297.882964] UBI: data offset:                4096
<5>[778297.990766] UBI: max. sequence number:       368
<5>[778298.006145] UBI: attached mtd6 to ubi2
<5>[778298.010032] UBI: MTD device name:            "config"
<5>[778298.015185] UBI: MTD device size:            15 MiB
<5>[778298.020171] UBI: number of good PEBs:        120
<5>[778298.024888] UBI: number of bad PEBs:         0
<5>[778298.029448] UBI: number of corrupted PEBs:   0
<5>[778298.033992] UBI: max. allowed volumes:       128
<5>[778298.038722] UBI: wear-leveling threshold:    4096
<5>[778298.043529] UBI: number of internal volumes: 1
<5>[778298.048092] UBI: number of user volumes:     1
<5>[778298.052633] UBI: available PEBs:             0
<5>[778298.057174] UBI: total number of reserved PEBs: 120
<5>[778298.062165] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[778298.068306] UBI: max/mean erase counter: 5/3
<5>[778298.072697] UBI: image sequence number:  1872325126
<5>[778298.077724] UBI: background thread "ubi_bgt2d" started, PID 32023
<5>[778298.201804] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[778298.207952] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[778298.215633] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[778298.223066] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[778298.229012] UBIFS: default compressor: lzo
<5>[778298.233207] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[778298.443427] UBIFS: un-mount UBI device 2, volume 0
<5>[778298.514119] UBI: mtd6 is detached from ubi2
<5>[799897.953311] UBI: attaching mtd6 to ubi2
<5>[799897.957250] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[799897.963658] UBI: logical eraseblock size:    126976 bytes
<5>[799897.969179] UBI: smallest flash I/O unit:    2048
<5>[799897.973983] UBI: VID header offset:          2048 (aligned 2048)
<5>[799897.980101] UBI: data offset:                4096
<5>[799898.088508] UBI: max. sequence number:       369
<5>[799898.105210] UBI: attached mtd6 to ubi2
<5>[799898.109104] UBI: MTD device name:            "config"
<5>[799898.114265] UBI: MTD device size:            15 MiB
<5>[799898.119269] UBI: number of good PEBs:        120
<5>[799898.123998] UBI: number of bad PEBs:         0
<5>[799898.128553] UBI: number of corrupted PEBs:   0
<5>[799898.133095] UBI: max. allowed volumes:       128
<5>[799898.137820] UBI: wear-leveling threshold:    4096
<5>[799898.142624] UBI: number of internal volumes: 1
<5>[799898.147164] UBI: number of user volumes:     1
<5>[799898.151713] UBI: available PEBs:             0
<5>[799898.156255] UBI: total number of reserved PEBs: 120
<5>[799898.161238] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[799898.167348] UBI: max/mean erase counter: 5/3
<5>[799898.171722] UBI: image sequence number:  1872325126
<5>[799898.176712] UBI: background thread "ubi_bgt2d" started, PID 26845
<5>[799898.303841] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[799898.309979] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[799898.317670] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[799898.325087] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[799898.331033] UBIFS: default compressor: lzo
<5>[799898.335227] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[799898.570052] UBIFS: un-mount UBI device 2, volume 0
<5>[799898.616136] UBI: mtd6 is detached from ubi2
<5>[821498.007918] UBI: attaching mtd6 to ubi2
<5>[821498.011858] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[821498.018248] UBI: logical eraseblock size:    126976 bytes
<5>[821498.023754] UBI: smallest flash I/O unit:    2048
<5>[821498.028567] UBI: VID header offset:          2048 (aligned 2048)
<5>[821498.034676] UBI: data offset:                4096
<5>[821498.143151] UBI: max. sequence number:       370
<5>[821498.158546] UBI: attached mtd6 to ubi2
<5>[821498.162425] UBI: MTD device name:            "config"
<5>[821498.167608] UBI: MTD device size:            15 MiB
<5>[821498.172592] UBI: number of good PEBs:        120
<5>[821498.177311] UBI: number of bad PEBs:         0
<5>[821498.181889] UBI: number of corrupted PEBs:   0
<5>[821498.186431] UBI: max. allowed volumes:       128
<5>[821498.191154] UBI: wear-leveling threshold:    4096
<5>[821498.195958] UBI: number of internal volumes: 1
<5>[821498.200506] UBI: number of user volumes:     1
<5>[821498.205047] UBI: available PEBs:             0
<5>[821498.209594] UBI: total number of reserved PEBs: 120
<5>[821498.214571] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[821498.220690] UBI: max/mean erase counter: 5/3
<5>[821498.225058] UBI: image sequence number:  1872325126
<5>[821498.230068] UBI: background thread "ubi_bgt2d" started, PID 21619
<5>[821498.354473] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[821498.360615] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[821498.368311] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[821498.375727] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[821498.381681] UBIFS: default compressor: lzo
<5>[821498.385877] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[821502.487591] UBIFS: un-mount UBI device 2, volume 0
<5>[821502.534092] UBI: mtd6 is detached from ubi2
<5>[843098.079266] UBI: attaching mtd6 to ubi2
<5>[843098.083217] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[843098.089612] UBI: logical eraseblock size:    126976 bytes
<5>[843098.095113] UBI: smallest flash I/O unit:    2048
<5>[843098.099935] UBI: VID header offset:          2048 (aligned 2048)
<5>[843098.106044] UBI: data offset:                4096
<5>[843098.213867] UBI: max. sequence number:       371
<5>[843098.229231] UBI: attached mtd6 to ubi2
<5>[843098.233084] UBI: MTD device name:            "config"
<5>[843098.238271] UBI: MTD device size:            15 MiB
<5>[843098.243250] UBI: number of good PEBs:        120
<5>[843098.247979] UBI: number of bad PEBs:         0
<5>[843098.252522] UBI: number of corrupted PEBs:   0
<5>[843098.257063] UBI: max. allowed volumes:       128
<5>[843098.261789] UBI: wear-leveling threshold:    4096
<5>[843098.266592] UBI: number of internal volumes: 1
<5>[843098.271141] UBI: number of user volumes:     1
<5>[843098.275683] UBI: available PEBs:             0
<5>[843098.280235] UBI: total number of reserved PEBs: 120
<5>[843098.285212] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[843098.291330] UBI: max/mean erase counter: 5/4
<5>[843098.295697] UBI: image sequence number:  1872325126
<5>[843098.300714] UBI: background thread "ubi_bgt2d" started, PID 16120
<5>[843098.424894] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[843098.431033] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[843098.438725] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[843098.446142] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[843098.452084] UBIFS: default compressor: lzo
<5>[843098.456279] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[843098.674179] UBIFS: un-mount UBI device 2, volume 0
<5>[843098.738297] UBI: mtd6 is detached from ubi2
<5>[864698.150689] UBI: attaching mtd6 to ubi2
<5>[864698.154627] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[864698.161035] UBI: logical eraseblock size:    126976 bytes
<5>[864698.166535] UBI: smallest flash I/O unit:    2048
<5>[864698.171354] UBI: VID header offset:          2048 (aligned 2048)
<5>[864698.177472] UBI: data offset:                4096
<5>[864698.285244] UBI: max. sequence number:       372
<5>[864698.300655] UBI: attached mtd6 to ubi2
<5>[864698.304509] UBI: MTD device name:            "config"
<5>[864698.309689] UBI: MTD device size:            15 MiB
<5>[864698.314667] UBI: number of good PEBs:        120
<5>[864698.319394] UBI: number of bad PEBs:         0
<5>[864698.323936] UBI: number of corrupted PEBs:   0
<5>[864698.328487] UBI: max. allowed volumes:       128
<5>[864698.333204] UBI: wear-leveling threshold:    4096
<5>[864698.338013] UBI: number of internal volumes: 1
<5>[864698.342555] UBI: number of user volumes:     1
<5>[864698.347095] UBI: available PEBs:             0
<5>[864698.351643] UBI: total number of reserved PEBs: 120
<5>[864698.356622] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[864698.362740] UBI: max/mean erase counter: 5/4
<5>[864698.367108] UBI: image sequence number:  1872325126
<5>[864698.372122] UBI: background thread "ubi_bgt2d" started, PID 10517
<5>[864698.495964] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[864698.502110] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[864698.509809] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[864698.517232] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[864698.523232] UBIFS: default compressor: lzo
<5>[864698.527451] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[864698.739063] UBIFS: un-mount UBI device 2, volume 0
<5>[864698.818788] UBI: mtd6 is detached from ubi2
<5>[886298.225862] UBI: attaching mtd6 to ubi2
<5>[886298.229846] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[886298.236218] UBI: logical eraseblock size:    126976 bytes
<5>[886298.241732] UBI: smallest flash I/O unit:    2048
<5>[886298.246536] UBI: VID header offset:          2048 (aligned 2048)
<5>[886298.252659] UBI: data offset:                4096
<5>[886298.360689] UBI: max. sequence number:       373
<5>[886298.376084] UBI: attached mtd6 to ubi2
<5>[886298.379969] UBI: MTD device name:            "config"
<5>[886298.385123] UBI: MTD device size:            15 MiB
<5>[886298.390109] UBI: number of good PEBs:        120
<5>[886298.394826] UBI: number of bad PEBs:         0
<5>[886298.399376] UBI: number of corrupted PEBs:   0
<5>[886298.403917] UBI: max. allowed volumes:       128
<5>[886298.408642] UBI: wear-leveling threshold:    4096
<5>[886298.413445] UBI: number of internal volumes: 1
<5>[886298.417993] UBI: number of user volumes:     1
<5>[886298.422534] UBI: available PEBs:             0
<5>[886298.427075] UBI: total number of reserved PEBs: 120
<5>[886298.432062] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[886298.438184] UBI: max/mean erase counter: 5/4
<5>[886298.442551] UBI: image sequence number:  1872325126
<5>[886298.447563] UBI: background thread "ubi_bgt2d" started, PID 5533
<5>[886298.570755] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[886298.576872] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[886298.584576] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[886298.592009] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[886298.597960] UBIFS: default compressor: lzo
<5>[886298.602154] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[886298.820778] UBIFS: un-mount UBI device 2, volume 0
<5>[886298.884197] UBI: mtd6 is detached from ubi2
<5>[907898.300658] UBI: attaching mtd6 to ubi2
<5>[907898.304598] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[907898.311008] UBI: logical eraseblock size:    126976 bytes
<5>[907898.316509] UBI: smallest flash I/O unit:    2048
<5>[907898.321325] UBI: VID header offset:          2048 (aligned 2048)
<5>[907898.327443] UBI: data offset:                4096
<5>[907898.435194] UBI: max. sequence number:       374
<5>[907898.450586] UBI: attached mtd6 to ubi2
<5>[907898.454440] UBI: MTD device name:            "config"
<5>[907898.459620] UBI: MTD device size:            15 MiB
<5>[907898.464599] UBI: number of good PEBs:        120
<5>[907898.469335] UBI: number of bad PEBs:         0
<5>[907898.473886] UBI: number of corrupted PEBs:   0
<5>[907898.478477] UBI: max. allowed volumes:       128
<5>[907898.483203] UBI: wear-leveling threshold:    4096
<5>[907898.488019] UBI: number of internal volumes: 1
<5>[907898.492560] UBI: number of user volumes:     1
<5>[907898.497100] UBI: available PEBs:             0
<5>[907898.501654] UBI: total number of reserved PEBs: 120
<5>[907898.506635] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[907898.512762] UBI: max/mean erase counter: 5/4
<5>[907898.517135] UBI: image sequence number:  1872325126
<5>[907898.522150] UBI: background thread "ubi_bgt2d" started, PID 319
<5>[907898.645626] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[907898.651783] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[907898.659488] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[907898.666935] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[907898.672904] UBIFS: default compressor: lzo
<5>[907898.677115] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[907900.713307] UBIFS: un-mount UBI device 2, volume 0
<5>[907900.767137] UBI: mtd6 is detached from ubi2
<5>[929498.376509] UBI: attaching mtd6 to ubi2
<5>[929498.380488] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[929498.386872] UBI: logical eraseblock size:    126976 bytes
<5>[929498.392381] UBI: smallest flash I/O unit:    2048
<5>[929498.397282] UBI: VID header offset:          2048 (aligned 2048)
<5>[929498.403406] UBI: data offset:                4096
<5>[929498.511379] UBI: max. sequence number:       375
<5>[929498.526751] UBI: attached mtd6 to ubi2
<5>[929498.530634] UBI: MTD device name:            "config"
<5>[929498.535789] UBI: MTD device size:            15 MiB
<5>[929498.540779] UBI: number of good PEBs:        120
<5>[929498.545496] UBI: number of bad PEBs:         0
<5>[929498.550055] UBI: number of corrupted PEBs:   0
<5>[929498.554597] UBI: max. allowed volumes:       128
<5>[929498.559324] UBI: wear-leveling threshold:    4096
<5>[929498.564126] UBI: number of internal volumes: 1
<5>[929498.568678] UBI: number of user volumes:     1
<5>[929498.573220] UBI: available PEBs:             0
<5>[929498.577768] UBI: total number of reserved PEBs: 120
<5>[929498.582745] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[929498.588861] UBI: max/mean erase counter: 5/4
<5>[929498.593234] UBI: image sequence number:  1872325126
<5>[929498.598297] UBI: background thread "ubi_bgt2d" started, PID 27472
<5>[929498.721548] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[929498.727689] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[929498.735376] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[929498.742817] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[929498.748773] UBIFS: default compressor: lzo
<5>[929498.752969] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[929498.963974] UBIFS: un-mount UBI device 2, volume 0
<5>[929499.033993] UBI: mtd6 is detached from ubi2
<5>[951098.453903] UBI: attaching mtd6 to ubi2
<5>[951098.457881] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[951098.464252] UBI: logical eraseblock size:    126976 bytes
<5>[951098.469763] UBI: smallest flash I/O unit:    2048
<5>[951098.474573] UBI: VID header offset:          2048 (aligned 2048)
<5>[951098.480692] UBI: data offset:                4096
<5>[951098.588431] UBI: max. sequence number:       376
<5>[951098.603864] UBI: attached mtd6 to ubi2
<5>[951098.607767] UBI: MTD device name:            "config"
<5>[951098.612922] UBI: MTD device size:            15 MiB
<5>[951098.617912] UBI: number of good PEBs:        120
<5>[951098.622634] UBI: number of bad PEBs:         0
<5>[951098.627181] UBI: number of corrupted PEBs:   0
<5>[951098.631748] UBI: max. allowed volumes:       128
<5>[951098.636465] UBI: wear-leveling threshold:    4096
<5>[951098.641279] UBI: number of internal volumes: 1
<5>[951098.645821] UBI: number of user volumes:     1
<5>[951098.650394] UBI: available PEBs:             0
<5>[951098.654950] UBI: total number of reserved PEBs: 120
<5>[951098.659946] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[951098.666056] UBI: max/mean erase counter: 5/4
<5>[951098.670431] UBI: image sequence number:  1872325126
<5>[951098.675443] UBI: background thread "ubi_bgt2d" started, PID 22169
<5>[951098.799742] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[951098.805858] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[951098.813562] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[951098.821005] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[951098.826941] UBIFS: default compressor: lzo
<5>[951098.831147] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[951099.048004] UBIFS: un-mount UBI device 2, volume 0
<5>[951099.097885] UBI: mtd6 is detached from ubi2
<5>[972698.526423] UBI: attaching mtd6 to ubi2
<5>[972698.530415] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[972698.536794] UBI: logical eraseblock size:    126976 bytes
<5>[972698.542313] UBI: smallest flash I/O unit:    2048
<5>[972698.547117] UBI: VID header offset:          2048 (aligned 2048)
<5>[972698.553242] UBI: data offset:                4096
<5>[972698.661023] UBI: max. sequence number:       377
<5>[972698.676386] UBI: attached mtd6 to ubi2
<5>[972698.680283] UBI: MTD device name:            "config"
<5>[972698.685437] UBI: MTD device size:            15 MiB
<5>[972698.690425] UBI: number of good PEBs:        120
<5>[972698.695142] UBI: number of bad PEBs:         0
<5>[972698.699693] UBI: number of corrupted PEBs:   0
<5>[972698.704235] UBI: max. allowed volumes:       128
<5>[972698.708963] UBI: wear-leveling threshold:    4096
<5>[972698.713766] UBI: number of internal volumes: 1
<5>[972698.718348] UBI: number of user volumes:     1
<5>[972698.722905] UBI: available PEBs:             0
<5>[972698.727476] UBI: total number of reserved PEBs: 120
<5>[972698.732454] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[972698.738577] UBI: max/mean erase counter: 5/4
<5>[972698.742946] UBI: image sequence number:  1872325126
<5>[972698.747975] UBI: background thread "ubi_bgt2d" started, PID 17404
<5>[972698.872370] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[972698.878513] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[972698.886195] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[972698.893626] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[972698.899571] UBIFS: default compressor: lzo
<5>[972698.903765] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[972699.127196] UBIFS: un-mount UBI device 2, volume 0
<5>[972699.209315] UBI: mtd6 is detached from ubi2
<5>[994298.609126] UBI: attaching mtd6 to ubi2
<5>[994298.613089] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[994298.619491] UBI: logical eraseblock size:    126976 bytes
<5>[994298.624993] UBI: smallest flash I/O unit:    2048
<5>[994298.629808] UBI: VID header offset:          2048 (aligned 2048)
<5>[994298.635918] UBI: data offset:                4096
<5>[994298.744373] UBI: max. sequence number:       380
<5>[994298.760042] UBI: attached mtd6 to ubi2
<5>[994298.763899] UBI: MTD device name:            "config"
<5>[994298.769078] UBI: MTD device size:            15 MiB
<5>[994298.774057] UBI: number of good PEBs:        120
<5>[994298.778785] UBI: number of bad PEBs:         0
<5>[994298.783332] UBI: number of corrupted PEBs:   0
<5>[994298.787889] UBI: max. allowed volumes:       128
<5>[994298.792605] UBI: wear-leveling threshold:    4096
<5>[994298.797408] UBI: number of internal volumes: 1
<5>[994298.801955] UBI: number of user volumes:     1
<5>[994298.806496] UBI: available PEBs:             0
<5>[994298.811043] UBI: total number of reserved PEBs: 120
<5>[994298.816020] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[994298.822137] UBI: max/mean erase counter: 5/4
<5>[994298.826504] UBI: image sequence number:  1872325126
<5>[994298.831601] UBI: background thread "ubi_bgt2d" started, PID 12325
<5>[994298.956165] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[994298.962306] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[994298.970015] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[994298.977446] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[994298.983382] UBIFS: default compressor: lzo
<5>[994298.987588] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[994299.216728] UBIFS: un-mount UBI device 2, volume 0
<5>[994299.277747] UBI: mtd6 is detached from ubi2
<5>[1015898.678573] UBI: attaching mtd6 to ubi2
<5>[1015898.682599] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1015898.689082] UBI: logical eraseblock size:    126976 bytes
<5>[1015898.694687] UBI: smallest flash I/O unit:    2048
<5>[1015898.699616] UBI: VID header offset:          2048 (aligned 2048)
<5>[1015898.705819] UBI: data offset:                4096
<5>[1015898.815177] UBI: max. sequence number:       381
<5>[1015898.830665] UBI: attached mtd6 to ubi2
<5>[1015898.834606] UBI: MTD device name:            "config"
<5>[1015898.839870] UBI: MTD device size:            15 MiB
<5>[1015898.844934] UBI: number of good PEBs:        120
<5>[1015898.849746] UBI: number of bad PEBs:         0
<5>[1015898.854375] UBI: number of corrupted PEBs:   0
<5>[1015898.859016] UBI: max. allowed volumes:       128
<5>[1015898.863820] UBI: wear-leveling threshold:    4096
<5>[1015898.868717] UBI: number of internal volumes: 1
<5>[1015898.873345] UBI: number of user volumes:     1
<5>[1015898.877980] UBI: available PEBs:             0
<5>[1015898.882608] UBI: total number of reserved PEBs: 120
<5>[1015898.887677] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1015898.893874] UBI: max/mean erase counter: 5/4
<5>[1015898.898334] UBI: image sequence number:  1872325126
<5>[1015898.903413] UBI: background thread "ubi_bgt2d" started, PID 6651
<5>[1015899.026197] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1015899.032425] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1015899.040229] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1015899.047747] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1015899.053770] UBIFS: default compressor: lzo
<5>[1015899.058067] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1015899.271786] UBIFS: un-mount UBI device 2, volume 0
<5>[1015899.324123] UBI: mtd6 is detached from ubi2
<5>[1037498.749046] UBI: attaching mtd6 to ubi2
<5>[1037498.753073] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1037498.759552] UBI: logical eraseblock size:    126976 bytes
<5>[1037498.765146] UBI: smallest flash I/O unit:    2048
<5>[1037498.770047] UBI: VID header offset:          2048 (aligned 2048)
<5>[1037498.776243] UBI: data offset:                4096
<5>[1037498.884086] UBI: max. sequence number:       382
<5>[1037498.899546] UBI: attached mtd6 to ubi2
<5>[1037498.903490] UBI: MTD device name:            "config"
<5>[1037498.908766] UBI: MTD device size:            15 MiB
<5>[1037498.913832] UBI: number of good PEBs:        120
<5>[1037498.918728] UBI: number of bad PEBs:         0
<5>[1037498.923392] UBI: number of corrupted PEBs:   0
<5>[1037498.928036] UBI: max. allowed volumes:       128
<5>[1037498.932841] UBI: wear-leveling threshold:    4096
<5>[1037498.937740] UBI: number of internal volumes: 1
<5>[1037498.942418] UBI: number of user volumes:     1
<5>[1037498.947053] UBI: available PEBs:             0
<5>[1037498.951697] UBI: total number of reserved PEBs: 120
<5>[1037498.956767] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1037498.962982] UBI: max/mean erase counter: 5/4
<5>[1037498.967444] UBI: image sequence number:  1872325126
<5>[1037498.972524] UBI: background thread "ubi_bgt2d" started, PID 1393
<5>[1037499.095221] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1037499.101471] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1037499.109256] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1037499.116760] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1037499.122793] UBIFS: default compressor: lzo
<5>[1037499.127075] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1037499.339949] UBIFS: un-mount UBI device 2, volume 0
<5>[1037499.383999] UBI: mtd6 is detached from ubi2
<5>[1059098.850455] UBI: attaching mtd6 to ubi2
<5>[1059098.854482] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1059098.860977] UBI: logical eraseblock size:    126976 bytes
<5>[1059098.866636] UBI: smallest flash I/O unit:    2048
<5>[1059098.871539] UBI: VID header offset:          2048 (aligned 2048)
<5>[1059098.877740] UBI: data offset:                4096
<5>[1059098.985662] UBI: max. sequence number:       383
<5>[1059099.002643] UBI: attached mtd6 to ubi2
<5>[1059099.006676] UBI: MTD device name:            "config"
<5>[1059099.012029] UBI: MTD device size:            15 MiB
<5>[1059099.017102] UBI: number of good PEBs:        120
<5>[1059099.022070] UBI: number of bad PEBs:         0
<5>[1059099.026709] UBI: number of corrupted PEBs:   0
<5>[1059099.031430] UBI: max. allowed volumes:       128
<5>[1059099.036241] UBI: wear-leveling threshold:    4096
<5>[1059099.041150] UBI: number of internal volumes: 1
<5>[1059099.045786] UBI: number of user volumes:     1
<5>[1059099.050426] UBI: available PEBs:             0
<5>[1059099.055056] UBI: total number of reserved PEBs: 120
<5>[1059099.060128] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1059099.066325] UBI: max/mean erase counter: 5/4
<5>[1059099.070788] UBI: image sequence number:  1872325126
<5>[1059099.075871] UBI: background thread "ubi_bgt2d" started, PID 9193
<5>[1059099.200979] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1059099.207193] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1059099.214981] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1059099.222525] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1059099.228575] UBIFS: default compressor: lzo
<5>[1059099.232863] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1059099.464534] UBIFS: un-mount UBI device 2, volume 0
<5>[1059099.514195] UBI: mtd6 is detached from ubi2
<5>[1080698.916870] UBI: attaching mtd6 to ubi2
<5>[1080698.920971] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1080698.927449] UBI: logical eraseblock size:    126976 bytes
<5>[1080698.933041] UBI: smallest flash I/O unit:    2048
<5>[1080698.937948] UBI: VID header offset:          2048 (aligned 2048)
<5>[1080698.944152] UBI: data offset:                4096
<5>[1080699.054425] UBI: max. sequence number:       384
<5>[1080699.070100] UBI: attached mtd6 to ubi2
<5>[1080699.074040] UBI: MTD device name:            "config"
<5>[1080699.079324] UBI: MTD device size:            15 MiB
<5>[1080699.079330] UBI: number of good PEBs:        120
<5>[1080699.079334] UBI: number of bad PEBs:         0
<5>[1080699.079338] UBI: number of corrupted PEBs:   0
<5>[1080699.079342] UBI: max. allowed volumes:       128
<5>[1080699.079346] UBI: wear-leveling threshold:    4096
<5>[1080699.079350] UBI: number of internal volumes: 1
<5>[1080699.079353] UBI: number of user volumes:     1
<5>[1080699.079357] UBI: available PEBs:             0
<5>[1080699.079361] UBI: total number of reserved PEBs: 120
<5>[1080699.079365] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1080699.079370] UBI: max/mean erase counter: 5/4
<5>[1080699.079374] UBI: image sequence number:  1872325126
<5>[1080699.082458] UBI: background thread "ubi_bgt2d" started, PID 3658
<5>[1080699.212211] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1080699.218461] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1080699.226229] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1080699.233743] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1080699.239774] UBIFS: default compressor: lzo
<5>[1080699.244055] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1080699.462018] UBIFS: un-mount UBI device 2, volume 0
<5>[1080699.527986] UBI: mtd6 is detached from ubi2
<5>[1102298.981645] UBI: attaching mtd6 to ubi2
<5>[1102298.985672] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1102298.992183] UBI: logical eraseblock size:    126976 bytes
<5>[1102298.997849] UBI: smallest flash I/O unit:    2048
<5>[1102299.002748] UBI: VID header offset:          2048 (aligned 2048)
<5>[1102299.009032] UBI: data offset:                4096
<5>[1102299.117348] UBI: max. sequence number:       385
<5>[1102299.132837] UBI: attached mtd6 to ubi2
<5>[1102299.136777] UBI: MTD device name:            "config"
<5>[1102299.142048] UBI: MTD device size:            15 MiB
<5>[1102299.147113] UBI: number of good PEBs:        120
<5>[1102299.151925] UBI: number of bad PEBs:         0
<5>[1102299.156555] UBI: number of corrupted PEBs:   0
<5>[1102299.161191] UBI: max. allowed volumes:       128
<5>[1102299.165993] UBI: wear-leveling threshold:    4096
<5>[1102299.170891] UBI: number of internal volumes: 1
<5>[1102299.175520] UBI: number of user volumes:     1
<5>[1102299.180154] UBI: available PEBs:             0
<5>[1102299.184783] UBI: total number of reserved PEBs: 120
<5>[1102299.189853] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1102299.196050] UBI: max/mean erase counter: 5/4
<5>[1102299.200513] UBI: image sequence number:  1872325126
<5>[1102299.205589] UBI: background thread "ubi_bgt2d" started, PID 30816
<5>[1102299.326669] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1102299.332895] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1102299.340673] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1102299.348204] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1102299.354232] UBIFS: default compressor: lzo
<5>[1102299.358529] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1102299.571837] UBIFS: un-mount UBI device 2, volume 0
<5>[1102299.643960] UBI: mtd6 is detached from ubi2
<5>[1123899.046041] UBI: attaching mtd6 to ubi2
<5>[1123899.050107] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1123899.056566] UBI: logical eraseblock size:    126976 bytes
<5>[1123899.062166] UBI: smallest flash I/O unit:    2048
<5>[1123899.067059] UBI: VID header offset:          2048 (aligned 2048)
<5>[1123899.073264] UBI: data offset:                4096
<5>[1123899.181164] UBI: max. sequence number:       386
<5>[1123899.196598] UBI: attached mtd6 to ubi2
<5>[1123899.200575] UBI: MTD device name:            "config"
<5>[1123899.205823] UBI: MTD device size:            15 MiB
<5>[1123899.210913] UBI: number of good PEBs:        120
<5>[1123899.215716] UBI: number of bad PEBs:         0
<5>[1123899.220353] UBI: number of corrupted PEBs:   0
<5>[1123899.224983] UBI: max. allowed volumes:       128
<5>[1123899.229798] UBI: wear-leveling threshold:    4096
<5>[1123899.234688] UBI: number of internal volumes: 1
<5>[1123899.239335] UBI: number of user volumes:     1
<5>[1123899.243965] UBI: available PEBs:             0
<5>[1123899.248605] UBI: total number of reserved PEBs: 120
<5>[1123899.253669] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1123899.259875] UBI: max/mean erase counter: 5/4
<5>[1123899.264334] UBI: image sequence number:  1872325126
<5>[1123899.269442] UBI: background thread "ubi_bgt2d" started, PID 25767
<5>[1123899.395745] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1123899.401972] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1123899.409749] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1123899.417261] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1123899.423301] UBIFS: default compressor: lzo
<5>[1123899.427608] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1123899.646765] UBIFS: un-mount UBI device 2, volume 0
<5>[1123899.714399] UBI: mtd6 is detached from ubi2
<5>[1145499.156578] UBI: attaching mtd6 to ubi2
<5>[1145499.160645] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1145499.167118] UBI: logical eraseblock size:    126976 bytes
<5>[1145499.172715] UBI: smallest flash I/O unit:    2048
<5>[1145499.177611] UBI: VID header offset:          2048 (aligned 2048)
<5>[1145499.183880] UBI: data offset:                4096
<5>[1145499.292166] UBI: max. sequence number:       387
<5>[1145499.307664] UBI: attached mtd6 to ubi2
<5>[1145499.311606] UBI: MTD device name:            "config"
<5>[1145499.316846] UBI: MTD device size:            15 MiB
<5>[1145499.321932] UBI: number of good PEBs:        120
<5>[1145499.326735] UBI: number of bad PEBs:         0
<5>[1145499.331374] UBI: number of corrupted PEBs:   0
<5>[1145499.336003] UBI: max. allowed volumes:       128
<5>[1145499.340814] UBI: wear-leveling threshold:    4096
<5>[1145499.345704] UBI: number of internal volumes: 1
<5>[1145499.350367] UBI: number of user volumes:     1
<5>[1145499.354996] UBI: available PEBs:             0
<5>[1145499.359640] UBI: total number of reserved PEBs: 120
<5>[1145499.364714] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1145499.370948] UBI: max/mean erase counter: 5/4
<5>[1145499.375408] UBI: image sequence number:  1872325126
<5>[1145499.380522] UBI: background thread "ubi_bgt2d" started, PID 27993
<5>[1145499.524836] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1145499.531057] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1145499.538839] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1145499.546343] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1145499.552374] UBIFS: default compressor: lzo
<5>[1145499.556656] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1145499.767388] UBIFS: un-mount UBI device 2, volume 0
<5>[1145499.828018] UBI: mtd6 is detached from ubi2
<5>[1167099.193785] UBI: attaching mtd6 to ubi2
<5>[1167099.197864] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1167099.204328] UBI: logical eraseblock size:    126976 bytes
<5>[1167099.209935] UBI: smallest flash I/O unit:    2048
<5>[1167099.214827] UBI: VID header offset:          2048 (aligned 2048)
<5>[1167099.221032] UBI: data offset:                4096
<5>[1167099.328895] UBI: max. sequence number:       388
<5>[1167099.344476] UBI: attached mtd6 to ubi2
<5>[1167099.348452] UBI: MTD device name:            "config"
<5>[1167099.353693] UBI: MTD device size:            15 MiB
<5>[1167099.358777] UBI: number of good PEBs:        120
<5>[1167099.363581] UBI: number of bad PEBs:         0
<5>[1167099.368218] UBI: number of corrupted PEBs:   0
<5>[1167099.372847] UBI: max. allowed volumes:       128
<5>[1167099.377660] UBI: wear-leveling threshold:    4096
<5>[1167099.382551] UBI: number of internal volumes: 1
<5>[1167099.387180] UBI: number of user volumes:     1
<5>[1167099.391819] UBI: available PEBs:             0
<5>[1167099.396448] UBI: total number of reserved PEBs: 120
<5>[1167099.401519] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1167099.407726] UBI: max/mean erase counter: 5/4
<5>[1167099.412181] UBI: image sequence number:  1872325126
<5>[1167099.417262] UBI: background thread "ubi_bgt2d" started, PID 22735
<5>[1167099.538947] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1167099.545151] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1167099.552946] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1167099.560475] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1167099.566499] UBIFS: default compressor: lzo
<5>[1167099.570792] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1167099.785411] UBIFS: un-mount UBI device 2, volume 0
<5>[1167099.858014] UBI: mtd6 is detached from ubi2
<5>[1188699.277778] UBI: attaching mtd6 to ubi2
<5>[1188699.281804] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1188699.288293] UBI: logical eraseblock size:    126976 bytes
<5>[1188699.293883] UBI: smallest flash I/O unit:    2048
<5>[1188699.298782] UBI: VID header offset:          2048 (aligned 2048)
<5>[1188699.304978] UBI: data offset:                4096
<5>[1188699.412861] UBI: max. sequence number:       389
<5>[1188699.428353] UBI: attached mtd6 to ubi2
<5>[1188699.432294] UBI: MTD device name:            "config"
<5>[1188699.437571] UBI: MTD device size:            15 MiB
<5>[1188699.442637] UBI: number of good PEBs:        120
<5>[1188699.447456] UBI: number of bad PEBs:         0
<5>[1188699.452086] UBI: number of corrupted PEBs:   0
<5>[1188699.456727] UBI: max. allowed volumes:       128
<5>[1188699.461554] UBI: wear-leveling threshold:    4096
<5>[1188699.466448] UBI: number of internal volumes: 1
<5>[1188699.471098] UBI: number of user volumes:     1
<5>[1188699.475728] UBI: available PEBs:             0
<5>[1188699.480378] UBI: total number of reserved PEBs: 120
<5>[1188699.485442] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1188699.491649] UBI: max/mean erase counter: 5/4
<5>[1188699.496104] UBI: image sequence number:  1872325126
<5>[1188699.501204] UBI: background thread "ubi_bgt2d" started, PID 17755
<5>[1188699.625385] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1188699.631618] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1188699.639402] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1188699.646906] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1188699.652944] UBIFS: default compressor: lzo
<5>[1188699.657225] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1188699.867835] UBIFS: un-mount UBI device 2, volume 0
<5>[1188699.944074] UBI: mtd6 is detached from ubi2
<5>[1210299.351417] UBI: attaching mtd6 to ubi2
<5>[1210299.355442] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1210299.361928] UBI: logical eraseblock size:    126976 bytes
<5>[1210299.367526] UBI: smallest flash I/O unit:    2048
<5>[1210299.372432] UBI: VID header offset:          2048 (aligned 2048)
<5>[1210299.378641] UBI: data offset:                4096
<5>[1210299.486850] UBI: max. sequence number:       390
<5>[1210299.502439] UBI: attached mtd6 to ubi2
<5>[1210299.506416] UBI: MTD device name:            "config"
<5>[1210299.511698] UBI: MTD device size:            15 MiB
<5>[1210299.516764] UBI: number of good PEBs:        120
<5>[1210299.521598] UBI: number of bad PEBs:         0
<5>[1210299.526245] UBI: number of corrupted PEBs:   0
<5>[1210299.530900] UBI: max. allowed volumes:       128
<5>[1210299.535716] UBI: wear-leveling threshold:    4096
<5>[1210299.540632] UBI: number of internal volumes: 1
<5>[1210299.545272] UBI: number of user volumes:     1
<5>[1210299.549924] UBI: available PEBs:             0
<5>[1210299.554552] UBI: total number of reserved PEBs: 120
<5>[1210299.559624] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1210299.565820] UBI: max/mean erase counter: 5/4
<5>[1210299.570282] UBI: image sequence number:  1872325126
<5>[1210299.575360] UBI: background thread "ubi_bgt2d" started, PID 12438
<5>[1210299.703124] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1210299.709355] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1210299.717122] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1210299.724639] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1210299.730671] UBIFS: default compressor: lzo
<5>[1210299.734952] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1210299.946408] UBIFS: un-mount UBI device 2, volume 0
<5>[1210300.014369] UBI: mtd6 is detached from ubi2
<5>[1231899.470279] UBI: attaching mtd6 to ubi2
<5>[1231899.474305] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1231899.480792] UBI: logical eraseblock size:    126976 bytes
<5>[1231899.486379] UBI: smallest flash I/O unit:    2048
<5>[1231899.491280] UBI: VID header offset:          2048 (aligned 2048)
<5>[1231899.497476] UBI: data offset:                4096
<5>[1231899.605357] UBI: max. sequence number:       391
<5>[1231899.620836] UBI: attached mtd6 to ubi2
<5>[1231899.624778] UBI: MTD device name:            "config"
<5>[1231899.630044] UBI: MTD device size:            15 MiB
<5>[1231899.635108] UBI: number of good PEBs:        120
<5>[1231899.639921] UBI: number of bad PEBs:         0
<5>[1231899.644550] UBI: number of corrupted PEBs:   0
<5>[1231899.649187] UBI: max. allowed volumes:       128
<5>[1231899.653990] UBI: wear-leveling threshold:    4096
<5>[1231899.658887] UBI: number of internal volumes: 1
<5>[1231899.663516] UBI: number of user volumes:     1
<5>[1231899.668143] UBI: available PEBs:             0
<5>[1231899.672778] UBI: total number of reserved PEBs: 120
<5>[1231899.677842] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1231899.684046] UBI: max/mean erase counter: 5/4
<5>[1231899.688506] UBI: image sequence number:  1872325126
<5>[1231899.693605] UBI: background thread "ubi_bgt2d" started, PID 7346
<5>[1231899.818075] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1231899.824319] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1231899.832114] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1231899.839641] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1231899.845671] UBIFS: default compressor: lzo
<5>[1231899.849975] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1231900.062846] UBIFS: un-mount UBI device 2, volume 0
<5>[1231900.115308] UBI: mtd6 is detached from ubi2
<5>[1253499.489828] UBI: attaching mtd6 to ubi2
<5>[1253499.493854] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1253499.500344] UBI: logical eraseblock size:    126976 bytes
<5>[1253499.505931] UBI: smallest flash I/O unit:    2048
<5>[1253499.510833] UBI: VID header offset:          2048 (aligned 2048)
<5>[1253499.517035] UBI: data offset:                4096
<5>[1253499.624951] UBI: max. sequence number:       392
<5>[1253499.640409] UBI: attached mtd6 to ubi2
<5>[1253499.644351] UBI: MTD device name:            "config"
<5>[1253499.649615] UBI: MTD device size:            15 MiB
<5>[1253499.654681] UBI: number of good PEBs:        120
<5>[1253499.659495] UBI: number of bad PEBs:         0
<5>[1253499.664123] UBI: number of corrupted PEBs:   0
<5>[1253499.668757] UBI: max. allowed volumes:       128
<5>[1253499.673572] UBI: wear-leveling threshold:    4096
<5>[1253499.678462] UBI: number of internal volumes: 1
<5>[1253499.683102] UBI: number of user volumes:     1
<5>[1253499.687731] UBI: available PEBs:             0
<5>[1253499.692370] UBI: total number of reserved PEBs: 120
<5>[1253499.697436] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1253499.703643] UBI: max/mean erase counter: 5/4
<5>[1253499.708097] UBI: image sequence number:  1872325126
<5>[1253499.713211] UBI: background thread "ubi_bgt2d" started, PID 2166
<5>[1253499.845509] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1253499.851735] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1253499.859520] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1253499.867024] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1253499.873055] UBIFS: default compressor: lzo
<5>[1253499.877337] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1253500.101448] UBIFS: un-mount UBI device 2, volume 0
<5>[1253500.140836] UBI: mtd6 is detached from ubi2
<5>[1275099.562599] UBI: attaching mtd6 to ubi2
<5>[1275099.566637] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1275099.573140] UBI: logical eraseblock size:    126976 bytes
<5>[1275099.578729] UBI: smallest flash I/O unit:    2048
<5>[1275099.583637] UBI: VID header offset:          2048 (aligned 2048)
<5>[1275099.589855] UBI: data offset:                4096
<5>[1275099.697704] UBI: max. sequence number:       393
<5>[1275099.714580] UBI: attached mtd6 to ubi2
<5>[1275099.718524] UBI: MTD device name:            "config"
<5>[1275099.723861] UBI: MTD device size:            15 MiB
<5>[1275099.728954] UBI: number of good PEBs:        120
<5>[1275099.733758] UBI: number of bad PEBs:         0
<5>[1275099.738386] UBI: number of corrupted PEBs:   0
<5>[1275099.743023] UBI: max. allowed volumes:       128
<5>[1275099.747827] UBI: wear-leveling threshold:    4096
<5>[1275099.752732] UBI: number of internal volumes: 1
<5>[1275099.757362] UBI: number of user volumes:     1
<5>[1275099.762006] UBI: available PEBs:             0
<5>[1275099.766636] UBI: total number of reserved PEBs: 120
<5>[1275099.771709] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1275099.777906] UBI: max/mean erase counter: 5/4
<5>[1275099.782369] UBI: image sequence number:  1872325126
<5>[1275099.787446] UBI: background thread "ubi_bgt2d" started, PID 29830
<5>[1275099.920381] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1275099.926585] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1275099.934374] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1275099.941893] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1275099.947916] UBIFS: default compressor: lzo
<5>[1275099.952206] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1275100.161187] UBIFS: un-mount UBI device 2, volume 0
<5>[1275100.205338] UBI: mtd6 is detached from ubi2
<5>[1296699.638403] UBI: attaching mtd6 to ubi2
<5>[1296699.642477] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1296699.648966] UBI: logical eraseblock size:    126976 bytes
<5>[1296699.654565] UBI: smallest flash I/O unit:    2048
<5>[1296699.659472] UBI: VID header offset:          2048 (aligned 2048)
<5>[1296699.665668] UBI: data offset:                4096
<5>[1296699.773568] UBI: max. sequence number:       394
<5>[1296699.789086] UBI: attached mtd6 to ubi2
<5>[1296699.793027] UBI: MTD device name:            "config"
<5>[1296699.798265] UBI: MTD device size:            15 MiB
<5>[1296699.803355] UBI: number of good PEBs:        120
<5>[1296699.808167] UBI: number of bad PEBs:         0
<5>[1296699.812813] UBI: number of corrupted PEBs:   0
<5>[1296699.817442] UBI: max. allowed volumes:       128
<5>[1296699.822255] UBI: wear-leveling threshold:    4096
<5>[1296699.827145] UBI: number of internal volumes: 1
<5>[1296699.831786] UBI: number of user volumes:     1
<5>[1296699.836415] UBI: available PEBs:             0
<5>[1296699.841053] UBI: total number of reserved PEBs: 120
<5>[1296699.846118] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1296699.852321] UBI: max/mean erase counter: 5/4
<5>[1296699.856776] UBI: image sequence number:  1872325126
<5>[1296699.861885] UBI: background thread "ubi_bgt2d" started, PID 24530
<5>[1296699.986270] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1296699.992496] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1296700.000288] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1296700.007791] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1296700.013823] UBIFS: default compressor: lzo
<5>[1296700.018105] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1296700.232191] UBIFS: un-mount UBI device 2, volume 0
<5>[1296700.312565] UBI: mtd6 is detached from ubi2
<5>[1318299.754971] UBI: attaching mtd6 to ubi2
<5>[1318299.759041] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1318299.765516] UBI: logical eraseblock size:    126976 bytes
<5>[1318299.771113] UBI: smallest flash I/O unit:    2048
<5>[1318299.776004] UBI: VID header offset:          2048 (aligned 2048)
<5>[1318299.782205] UBI: data offset:                4096
<5>[1318299.890092] UBI: max. sequence number:       395
<5>[1318299.906920] UBI: attached mtd6 to ubi2
<5>[1318299.910905] UBI: MTD device name:            "config"
<5>[1318299.916153] UBI: MTD device size:            15 MiB
<5>[1318299.921238] UBI: number of good PEBs:        120
<5>[1318299.926046] UBI: number of bad PEBs:         0
<5>[1318299.930689] UBI: number of corrupted PEBs:   0
<5>[1318299.935318] UBI: max. allowed volumes:       128
<5>[1318299.940128] UBI: wear-leveling threshold:    4096
<5>[1318299.945018] UBI: number of internal volumes: 1
<5>[1318299.949652] UBI: number of user volumes:     1
<5>[1318299.954280] UBI: available PEBs:             0
<5>[1318299.958915] UBI: total number of reserved PEBs: 120
<5>[1318299.963979] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1318299.970189] UBI: max/mean erase counter: 5/4
<5>[1318299.974644] UBI: image sequence number:  1872325126
<5>[1318299.979763] UBI: background thread "ubi_bgt2d" started, PID 26273
<5>[1318300.103585] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1318300.109821] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1318300.117605] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1318300.125121] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1318300.131152] UBIFS: default compressor: lzo
<5>[1318300.135434] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1318300.345750] UBIFS: un-mount UBI device 2, volume 0
<5>[1318300.395463] UBI: mtd6 is detached from ubi2
<5>[1339899.786497] UBI: attaching mtd6 to ubi2
<5>[1339899.790559] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1339899.797017] UBI: logical eraseblock size:    126976 bytes
<5>[1339899.802617] UBI: smallest flash I/O unit:    2048
<5>[1339899.807510] UBI: VID header offset:          2048 (aligned 2048)
<5>[1339899.813720] UBI: data offset:                4096
<5>[1339899.921614] UBI: max. sequence number:       396
<5>[1339899.937414] UBI: attached mtd6 to ubi2
<5>[1339899.941404] UBI: MTD device name:            "config"
<5>[1339899.946667] UBI: MTD device size:            15 MiB
<5>[1339899.951770] UBI: number of good PEBs:        120
<5>[1339899.956579] UBI: number of bad PEBs:         0
<5>[1339899.961227] UBI: number of corrupted PEBs:   0
<5>[1339899.965857] UBI: max. allowed volumes:       128
<5>[1339899.970679] UBI: wear-leveling threshold:    4096
<5>[1339899.975569] UBI: number of internal volumes: 1
<5>[1339899.980213] UBI: number of user volumes:     1
<5>[1339899.984842] UBI: available PEBs:             0
<5>[1339899.989479] UBI: total number of reserved PEBs: 120
<5>[1339899.994543] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1339900.000748] UBI: max/mean erase counter: 5/4
<5>[1339900.005204] UBI: image sequence number:  1872325126
<5>[1339900.010314] UBI: background thread "ubi_bgt2d" started, PID 6217
<5>[1339900.133844] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1339900.140068] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1339900.147836] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1339900.155353] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1339900.161384] UBIFS: default compressor: lzo
<5>[1339900.165666] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1339900.375799] UBIFS: un-mount UBI device 2, volume 0
<5>[1339900.445548] UBI: mtd6 is detached from ubi2
<5>[1361499.868253] UBI: attaching mtd6 to ubi2
<5>[1361499.872343] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1361499.878823] UBI: logical eraseblock size:    126976 bytes
<5>[1361499.884423] UBI: smallest flash I/O unit:    2048
<5>[1361499.889327] UBI: VID header offset:          2048 (aligned 2048)
<5>[1361499.895598] UBI: data offset:                4096
<5>[1361500.003829] UBI: max. sequence number:       397
<5>[1361500.019290] UBI: attached mtd6 to ubi2
<5>[1361500.023240] UBI: MTD device name:            "config"
<5>[1361500.028486] UBI: MTD device size:            15 MiB
<5>[1361500.033572] UBI: number of good PEBs:        120
<5>[1361500.038375] UBI: number of bad PEBs:         0
<5>[1361500.043014] UBI: number of corrupted PEBs:   0
<5>[1361500.047642] UBI: max. allowed volumes:       128
<5>[1361500.052452] UBI: wear-leveling threshold:    4096
<5>[1361500.057343] UBI: number of internal volumes: 1
<5>[1361500.061981] UBI: number of user volumes:     1
<5>[1361500.066609] UBI: available PEBs:             0
<5>[1361500.071244] UBI: total number of reserved PEBs: 120
<5>[1361500.076309] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1361500.082513] UBI: max/mean erase counter: 5/4
<5>[1361500.086968] UBI: image sequence number:  1872325126
<5>[1361500.092068] UBI: background thread "ubi_bgt2d" started, PID 19064
<5>[1361500.217280] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1361500.223518] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1361500.231298] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1361500.238802] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1361500.244842] UBIFS: default compressor: lzo
<5>[1361500.249143] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1361500.460787] UBIFS: un-mount UBI device 2, volume 0
<5>[1361500.525562] UBI: mtd6 is detached from ubi2
<5>[1383099.951381] UBI: attaching mtd6 to ubi2
<5>[1383099.955407] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1383099.961901] UBI: logical eraseblock size:    126976 bytes
<5>[1383099.967489] UBI: smallest flash I/O unit:    2048
<5>[1383099.972397] UBI: VID header offset:          2048 (aligned 2048)
<5>[1383099.978599] UBI: data offset:                4096
<5>[1383100.086465] UBI: max. sequence number:       398
<5>[1383100.101948] UBI: attached mtd6 to ubi2
<5>[1383100.105889] UBI: MTD device name:            "config"
<5>[1383100.111156] UBI: MTD device size:            15 MiB
<5>[1383100.116221] UBI: number of good PEBs:        120
<5>[1383100.121036] UBI: number of bad PEBs:         0
<5>[1383100.125665] UBI: number of corrupted PEBs:   0
<5>[1383100.130301] UBI: max. allowed volumes:       128
<5>[1383100.135104] UBI: wear-leveling threshold:    4096
<5>[1383100.140002] UBI: number of internal volumes: 1
<5>[1383100.144631] UBI: number of user volumes:     1
<5>[1383100.149293] UBI: available PEBs:             0
<5>[1383100.153945] UBI: total number of reserved PEBs: 120
<5>[1383100.159038] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1383100.165245] UBI: max/mean erase counter: 5/4
<5>[1383100.169715] UBI: image sequence number:  1872325126
<5>[1383100.174793] UBI: background thread "ubi_bgt2d" started, PID 31832
<5>[1383100.301511] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1383100.307715] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1383100.315509] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1383100.323027] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1383100.329082] UBIFS: default compressor: lzo
<5>[1383100.333363] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1383100.549313] UBIFS: un-mount UBI device 2, volume 0
<5>[1383100.595678] UBI: mtd6 is detached from ubi2
<5>[1404700.013200] UBI: attaching mtd6 to ubi2
<5>[1404700.017259] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1404700.023777] UBI: logical eraseblock size:    126976 bytes
<5>[1404700.029399] UBI: smallest flash I/O unit:    2048
<5>[1404700.034317] UBI: VID header offset:          2048 (aligned 2048)
<5>[1404700.040548] UBI: data offset:                4096
<5>[1404700.148444] UBI: max. sequence number:       399
<5>[1404700.163942] UBI: attached mtd6 to ubi2
<5>[1404700.167893] UBI: MTD device name:            "config"
<5>[1404700.173162] UBI: MTD device size:            15 MiB
<5>[1404700.178227] UBI: number of good PEBs:        120
<5>[1404700.183042] UBI: number of bad PEBs:         0
<5>[1404700.187670] UBI: number of corrupted PEBs:   0
<5>[1404700.192310] UBI: max. allowed volumes:       128
<5>[1404700.197132] UBI: wear-leveling threshold:    4096
<5>[1404700.202051] UBI: number of internal volumes: 1
<5>[1404700.206688] UBI: number of user volumes:     1
<5>[1404700.211363] UBI: available PEBs:             0
<5>[1404700.216002] UBI: total number of reserved PEBs: 120
<5>[1404700.221105] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1404700.227308] UBI: max/mean erase counter: 5/4
<5>[1404700.231805] UBI: image sequence number:  1872325126
<5>[1404700.236906] UBI: background thread "ubi_bgt2d" started, PID 12602
<5>[1404700.366784] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1404700.373006] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1404700.380805] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1404700.388308] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1404700.394345] UBIFS: default compressor: lzo
<5>[1404700.398630] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1404700.612377] UBIFS: un-mount UBI device 2, volume 0
<5>[1404700.675432] UBI: mtd6 is detached from ubi2
<5>[1426304.143475] UBI: attaching mtd6 to ubi2
<5>[1426304.147501] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1426304.154019] UBI: logical eraseblock size:    126976 bytes
<5>[1426304.159629] UBI: smallest flash I/O unit:    2048
<5>[1426304.164520] UBI: VID header offset:          2048 (aligned 2048)
<5>[1426304.170726] UBI: data offset:                4096
<5>[1426304.278805] UBI: max. sequence number:       400
<5>[1426304.294344] UBI: attached mtd6 to ubi2
<5>[1426304.298285] UBI: MTD device name:            "config"
<5>[1426304.303547] UBI: MTD device size:            15 MiB
<5>[1426304.308611] UBI: number of good PEBs:        120
<5>[1426304.313424] UBI: number of bad PEBs:         0
<5>[1426304.318054] UBI: number of corrupted PEBs:   0
<5>[1426304.322690] UBI: max. allowed volumes:       128
<5>[1426304.327493] UBI: wear-leveling threshold:    4096
<5>[1426304.332388] UBI: number of internal volumes: 1
<5>[1426304.337017] UBI: number of user volumes:     1
<5>[1426304.341653] UBI: available PEBs:             0
<5>[1426304.346282] UBI: total number of reserved PEBs: 120
<5>[1426304.351356] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1426304.357554] UBI: max/mean erase counter: 5/4
<5>[1426304.362017] UBI: image sequence number:  1872325126
<5>[1426304.367095] UBI: background thread "ubi_bgt2d" started, PID 7702
<5>[1426304.493471] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1426304.499701] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1426304.507480] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1426304.515008] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1426304.521046] UBIFS: default compressor: lzo
<5>[1426304.525329] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1426304.735804] UBIFS: un-mount UBI device 2, volume 0
<5>[1426304.805516] UBI: mtd6 is detached from ubi2
<5>[1447900.163215] UBI: attaching mtd6 to ubi2
<5>[1447900.167242] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1447900.173761] UBI: logical eraseblock size:    126976 bytes
<5>[1447900.179376] UBI: smallest flash I/O unit:    2048
<5>[1447900.184291] UBI: VID header offset:          2048 (aligned 2048)
<5>[1447900.190507] UBI: data offset:                4096
<5>[1447900.298783] UBI: max. sequence number:       403
<5>[1447900.314281] UBI: attached mtd6 to ubi2
<5>[1447900.318223] UBI: MTD device name:            "config"
<5>[1447900.323491] UBI: MTD device size:            15 MiB
<5>[1447900.328556] UBI: number of good PEBs:        120
<5>[1447900.333369] UBI: number of bad PEBs:         0
<5>[1447900.338003] UBI: number of corrupted PEBs:   0
<5>[1447900.342647] UBI: max. allowed volumes:       128
<5>[1447900.347450] UBI: wear-leveling threshold:    4096
<5>[1447900.352363] UBI: number of internal volumes: 1
<5>[1447900.356991] UBI: number of user volumes:     1
<5>[1447900.361628] UBI: available PEBs:             0
<5>[1447900.366257] UBI: total number of reserved PEBs: 120
<5>[1447900.371329] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1447900.377526] UBI: max/mean erase counter: 5/4
<5>[1447900.381987] UBI: image sequence number:  1872325126
<5>[1447900.387066] UBI: background thread "ubi_bgt2d" started, PID 20533
<5>[1447900.513877] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1447900.520105] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1447900.527872] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1447900.535389] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1447900.541421] UBIFS: default compressor: lzo
<5>[1447900.545708] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1447900.757910] UBIFS: un-mount UBI device 2, volume 0
<5>[1447900.825366] UBI: mtd6 is detached from ubi2
<5>[1469500.247310] UBI: attaching mtd6 to ubi2
<5>[1469500.251384] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1469500.257853] UBI: logical eraseblock size:    126976 bytes
<5>[1469500.263465] UBI: smallest flash I/O unit:    2048
<5>[1469500.268359] UBI: VID header offset:          2048 (aligned 2048)
<5>[1469500.274568] UBI: data offset:                4096
<5>[1469500.382462] UBI: max. sequence number:       404
<5>[1469500.397922] UBI: attached mtd6 to ubi2
<5>[1469500.401895] UBI: MTD device name:            "config"
<5>[1469500.407136] UBI: MTD device size:            15 MiB
<5>[1469500.412211] UBI: number of good PEBs:        120
<5>[1469500.417014] UBI: number of bad PEBs:         0
<5>[1469500.421651] UBI: number of corrupted PEBs:   0
<5>[1469500.426280] UBI: max. allowed volumes:       128
<5>[1469500.431096] UBI: wear-leveling threshold:    4096
<5>[1469500.435996] UBI: number of internal volumes: 1
<5>[1469500.440639] UBI: number of user volumes:     1
<5>[1469500.445269] UBI: available PEBs:             0
<5>[1469500.449907] UBI: total number of reserved PEBs: 120
<5>[1469500.454972] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1469500.461174] UBI: max/mean erase counter: 5/4
<5>[1469500.465629] UBI: image sequence number:  1872325126
<5>[1469500.470781] UBI: background thread "ubi_bgt2d" started, PID 885
<5>[1469500.595279] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1469500.601519] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1469500.609308] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1469500.616819] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1469500.622865] UBIFS: default compressor: lzo
<5>[1469500.627148] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1469500.837938] UBIFS: un-mount UBI device 2, volume 0
<5>[1469500.885376] UBI: mtd6 is detached from ubi2
<5>[1491100.400699] UBI: attaching mtd6 to ubi2
<5>[1491100.404734] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1491100.411230] UBI: logical eraseblock size:    126976 bytes
<5>[1491100.416818] UBI: smallest flash I/O unit:    2048
<5>[1491100.421724] UBI: VID header offset:          2048 (aligned 2048)
<5>[1491100.427920] UBI: data offset:                4096
<5>[1491100.535895] UBI: max. sequence number:       405
<5>[1491100.551411] UBI: attached mtd6 to ubi2
<5>[1491100.555350] UBI: MTD device name:            "config"
<5>[1491100.560627] UBI: MTD device size:            15 MiB
<5>[1491100.565693] UBI: number of good PEBs:        120
<5>[1491100.570516] UBI: number of bad PEBs:         0
<5>[1491100.575146] UBI: number of corrupted PEBs:   0
<5>[1491100.579792] UBI: max. allowed volumes:       128
<5>[1491100.584604] UBI: wear-leveling threshold:    4096
<5>[1491100.589533] UBI: number of internal volumes: 1
<5>[1491100.594170] UBI: number of user volumes:     1
<5>[1491100.598804] UBI: available PEBs:             0
<5>[1491100.603471] UBI: total number of reserved PEBs: 120
<5>[1491100.608540] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1491100.614758] UBI: max/mean erase counter: 5/4
<5>[1491100.619237] UBI: image sequence number:  1872325126
<5>[1491100.624380] UBI: background thread "ubi_bgt2d" started, PID 13864
<5>[1491100.761724] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1491100.767940] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1491100.775755] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1491100.783290] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1491100.789332] UBIFS: default compressor: lzo
<5>[1491100.793621] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1491101.022086] UBIFS: un-mount UBI device 2, volume 0
<5>[1491101.085367] UBI: mtd6 is detached from ubi2
<5>[1512700.501046] UBI: attaching mtd6 to ubi2
<5>[1512700.505095] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1512700.511595] UBI: logical eraseblock size:    126976 bytes
<5>[1512700.517195] UBI: smallest flash I/O unit:    2048
<5>[1512700.522126] UBI: VID header offset:          2048 (aligned 2048)
<5>[1512700.528330] UBI: data offset:                4096
<5>[1512700.642333] UBI: max. sequence number:       406
<5>[1512700.661779] UBI: attached mtd6 to ubi2
<5>[1512700.665736] UBI: MTD device name:            "config"
<5>[1512700.671044] UBI: MTD device size:            15 MiB
<5>[1512700.676117] UBI: number of good PEBs:        120
<5>[1512700.680952] UBI: number of bad PEBs:         0
<5>[1512700.685603] UBI: number of corrupted PEBs:   0
<5>[1512700.690263] UBI: max. allowed volumes:       128
<5>[1512700.695070] UBI: wear-leveling threshold:    4096
<5>[1512700.700014] UBI: number of internal volumes: 1
<5>[1512700.704657] UBI: number of user volumes:     1
<5>[1512700.709328] UBI: available PEBs:             0
<5>[1512700.713966] UBI: total number of reserved PEBs: 120
<5>[1512700.719070] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1512700.725278] UBI: max/mean erase counter: 5/4
<5>[1512700.729765] UBI: image sequence number:  1872325126
<5>[1512700.736731] UBI: background thread "ubi_bgt2d" started, PID 26973
<5>[1512700.871286] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1512700.877497] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1512700.885292] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1512700.892826] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1512700.898864] UBIFS: default compressor: lzo
<5>[1512700.903152] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1512701.171533] UBIFS: un-mount UBI device 2, volume 0
<5>[1512701.227855] UBI: mtd6 is detached from ubi2
<5>[1534300.537690] UBI: attaching mtd6 to ubi2
<5>[1534300.541762] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1534300.548230] UBI: logical eraseblock size:    126976 bytes
<5>[1534300.553826] UBI: smallest flash I/O unit:    2048
<5>[1534300.558717] UBI: VID header offset:          2048 (aligned 2048)
<5>[1534300.564991] UBI: data offset:                4096
<5>[1534300.672916] UBI: max. sequence number:       407
<5>[1534300.688392] UBI: attached mtd6 to ubi2
<5>[1534300.692371] UBI: MTD device name:            "config"
<5>[1534300.697612] UBI: MTD device size:            15 MiB
<5>[1534300.702696] UBI: number of good PEBs:        120
<5>[1534300.707506] UBI: number of bad PEBs:         0
<5>[1534300.712147] UBI: number of corrupted PEBs:   0
<5>[1534300.716776] UBI: max. allowed volumes:       128
<5>[1534300.721587] UBI: wear-leveling threshold:    4096
<5>[1534300.726477] UBI: number of internal volumes: 1
<5>[1534300.731116] UBI: number of user volumes:     1
<5>[1534300.735745] UBI: available PEBs:             0
<5>[1534300.740381] UBI: total number of reserved PEBs: 120
<5>[1534300.745446] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1534300.751652] UBI: max/mean erase counter: 5/4
<5>[1534300.756108] UBI: image sequence number:  1872325126
<5>[1534300.761207] UBI: background thread "ubi_bgt2d" started, PID 7148
<5>[1534300.889537] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1534300.895741] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1534300.903529] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1534300.911045] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1534300.917072] UBIFS: default compressor: lzo
<5>[1534300.921367] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1534301.133098] UBIFS: un-mount UBI device 2, volume 0
<5>[1534301.205412] UBI: mtd6 is detached from ubi2
<5>[1555900.612200] UBI: attaching mtd6 to ubi2
<5>[1555900.616227] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1555900.622713] UBI: logical eraseblock size:    126976 bytes
<5>[1555900.628301] UBI: smallest flash I/O unit:    2048
<5>[1555900.633203] UBI: VID header offset:          2048 (aligned 2048)
<5>[1555900.639411] UBI: data offset:                4096
<5>[1555900.749095] UBI: max. sequence number:       408
<5>[1555900.764564] UBI: attached mtd6 to ubi2
<5>[1555900.768506] UBI: MTD device name:            "config"
<5>[1555900.773771] UBI: MTD device size:            15 MiB
<5>[1555900.778847] UBI: number of good PEBs:        120
<5>[1555900.783655] UBI: number of bad PEBs:         0
<5>[1555900.788287] UBI: number of corrupted PEBs:   0
<5>[1555900.792928] UBI: max. allowed volumes:       128
<5>[1555900.797732] UBI: wear-leveling threshold:    4096
<5>[1555900.802631] UBI: number of internal volumes: 1
<5>[1555900.807259] UBI: number of user volumes:     1
<5>[1555900.811895] UBI: available PEBs:             0
<5>[1555900.816524] UBI: total number of reserved PEBs: 120
<5>[1555900.821596] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1555900.827796] UBI: max/mean erase counter: 5/4
<5>[1555900.832270] UBI: image sequence number:  1872325126
<5>[1555900.837347] UBI: background thread "ubi_bgt2d" started, PID 19928
<5>[1555900.965320] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1555900.971547] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1555900.979335] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1555900.986843] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1555900.992881] UBIFS: default compressor: lzo
<5>[1555900.997165] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1555901.210354] UBIFS: un-mount UBI device 2, volume 0
<5>[1555901.259521] UBI: mtd6 is detached from ubi2
<5>[1577500.823051] UBI: attaching mtd6 to ubi2
<5>[1577500.827077] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1577500.833583] UBI: logical eraseblock size:    126976 bytes
<5>[1577500.839183] UBI: smallest flash I/O unit:    2048
<5>[1577500.844073] UBI: VID header offset:          2048 (aligned 2048)
<5>[1577500.850274] UBI: data offset:                4096
<5>[1577500.958131] UBI: max. sequence number:       409
<5>[1577500.973661] UBI: attached mtd6 to ubi2
<5>[1577500.977603] UBI: MTD device name:            "config"
<5>[1577500.982862] UBI: MTD device size:            15 MiB
<5>[1577500.987926] UBI: number of good PEBs:        120
<5>[1577500.992738] UBI: number of bad PEBs:         0
<5>[1577500.997367] UBI: number of corrupted PEBs:   0
<5>[1577501.002014] UBI: max. allowed volumes:       128
<5>[1577501.006816] UBI: wear-leveling threshold:    4096
<5>[1577501.011715] UBI: number of internal volumes: 1
<5>[1577501.016343] UBI: number of user volumes:     1
<5>[1577501.020979] UBI: available PEBs:             0
<5>[1577501.025608] UBI: total number of reserved PEBs: 120
<5>[1577501.030679] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1577501.036876] UBI: max/mean erase counter: 5/4
<5>[1577501.041351] UBI: image sequence number:  1872325126
<5>[1577501.046531] UBI: background thread "ubi_bgt2d" started, PID 32209
<5>[1577501.173814] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1577501.180046] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1577501.187812] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1577501.195327] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1577501.201360] UBIFS: default compressor: lzo
<5>[1577501.205641] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1577501.417192] UBIFS: un-mount UBI device 2, volume 0
<5>[1577501.485659] UBI: mtd6 is detached from ubi2
<5>[1599100.892616] UBI: attaching mtd6 to ubi2
<5>[1599100.896654] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1599100.903154] UBI: logical eraseblock size:    126976 bytes
<5>[1599100.908742] UBI: smallest flash I/O unit:    2048
<5>[1599100.913648] UBI: VID header offset:          2048 (aligned 2048)
<5>[1599100.919877] UBI: data offset:                4096
<5>[1599101.028594] UBI: max. sequence number:       410
<5>[1599101.044110] UBI: attached mtd6 to ubi2
<5>[1599101.048051] UBI: MTD device name:            "config"
<5>[1599101.053318] UBI: MTD device size:            15 MiB
<5>[1599101.058383] UBI: number of good PEBs:        120
<5>[1599101.063197] UBI: number of bad PEBs:         0
<5>[1599101.067831] UBI: number of corrupted PEBs:   0
<5>[1599101.072473] UBI: max. allowed volumes:       128
<5>[1599101.077277] UBI: wear-leveling threshold:    4096
<5>[1599101.082179] UBI: number of internal volumes: 1
<5>[1599101.086812] UBI: number of user volumes:     1
<5>[1599101.091451] UBI: available PEBs:             0
<5>[1599101.096080] UBI: total number of reserved PEBs: 120
<5>[1599101.101151] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1599101.107348] UBI: max/mean erase counter: 5/4
<5>[1599101.111812] UBI: image sequence number:  1872325126
<5>[1599101.116888] UBI: background thread "ubi_bgt2d" started, PID 13039
<5>[1599101.239353] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1599101.245556] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1599101.253345] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1599101.260859] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1599101.266882] UBIFS: default compressor: lzo
<5>[1599101.271171] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1599101.481780] UBIFS: un-mount UBI device 2, volume 0
<5>[1599101.545627] UBI: mtd6 is detached from ubi2
<5>[1620700.971474] UBI: attaching mtd6 to ubi2
<5>[1620700.975501] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1620700.981989] UBI: logical eraseblock size:    126976 bytes
<5>[1620700.987577] UBI: smallest flash I/O unit:    2048
<5>[1620700.992479] UBI: VID header offset:          2048 (aligned 2048)
<5>[1620700.998675] UBI: data offset:                4096
<5>[1620701.106565] UBI: max. sequence number:       411
<5>[1620701.122051] UBI: attached mtd6 to ubi2
<5>[1620701.125991] UBI: MTD device name:            "config"
<5>[1620701.131254] UBI: MTD device size:            15 MiB
<5>[1620701.136319] UBI: number of good PEBs:        120
<5>[1620701.141133] UBI: number of bad PEBs:         0
<5>[1620701.145762] UBI: number of corrupted PEBs:   0
<5>[1620701.150401] UBI: max. allowed volumes:       128
<5>[1620701.155203] UBI: wear-leveling threshold:    4096
<5>[1620701.160102] UBI: number of internal volumes: 1
<5>[1620701.164731] UBI: number of user volumes:     1
<5>[1620701.169366] UBI: available PEBs:             0
<5>[1620701.173995] UBI: total number of reserved PEBs: 120
<5>[1620701.179065] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1620701.185261] UBI: max/mean erase counter: 5/4
<5>[1620701.189730] UBI: image sequence number:  1872325126
<5>[1620701.194809] UBI: background thread "ubi_bgt2d" started, PID 26040
<5>[1620701.316156] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1620701.322386] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1620701.330173] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1620701.337677] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1620701.343719] UBIFS: default compressor: lzo
<5>[1620701.348003] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1620701.565977] UBIFS: un-mount UBI device 2, volume 0
<5>[1620701.629532] UBI: mtd6 is detached from ubi2
<5>[1642301.042795] UBI: attaching mtd6 to ubi2
<5>[1642301.046835] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1642301.053325] UBI: logical eraseblock size:    126976 bytes
<5>[1642301.058928] UBI: smallest flash I/O unit:    2048
<5>[1642301.063819] UBI: VID header offset:          2048 (aligned 2048)
<5>[1642301.070022] UBI: data offset:                4096
<5>[1642301.177922] UBI: max. sequence number:       412
<5>[1642301.193381] UBI: attached mtd6 to ubi2
<5>[1642301.197323] UBI: MTD device name:            "config"
<5>[1642301.202598] UBI: MTD device size:            15 MiB
<5>[1642301.207670] UBI: number of good PEBs:        120
<5>[1642301.212533] UBI: number of bad PEBs:         0
<5>[1642301.217173] UBI: number of corrupted PEBs:   0
<5>[1642301.221822] UBI: max. allowed volumes:       128
<5>[1642301.226625] UBI: wear-leveling threshold:    4096
<5>[1642301.231521] UBI: number of internal volumes: 1
<5>[1642301.236151] UBI: number of user volumes:     1
<5>[1642301.240786] UBI: available PEBs:             0
<5>[1642301.245416] UBI: total number of reserved PEBs: 120
<5>[1642301.250487] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1642301.256683] UBI: max/mean erase counter: 5/4
<5>[1642301.261147] UBI: image sequence number:  1872325126
<5>[1642301.266226] UBI: background thread "ubi_bgt2d" started, PID 6064
<5>[1642301.387927] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1642301.394154] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1642301.401936] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1642301.409450] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1642301.415473] UBIFS: default compressor: lzo
<5>[1642301.419762] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1642301.630558] UBIFS: un-mount UBI device 2, volume 0
<5>[1642301.685348] UBI: mtd6 is detached from ubi2
<5>[1663901.116359] UBI: attaching mtd6 to ubi2
<5>[1663901.120423] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1663901.126882] UBI: logical eraseblock size:    126976 bytes
<5>[1663901.132481] UBI: smallest flash I/O unit:    2048
<5>[1663901.137372] UBI: VID header offset:          2048 (aligned 2048)
<5>[1663901.143577] UBI: data offset:                4096
<5>[1663901.251509] UBI: max. sequence number:       413
<5>[1663901.267045] UBI: attached mtd6 to ubi2
<5>[1663901.271014] UBI: MTD device name:            "config"
<5>[1663901.276254] UBI: MTD device size:            15 MiB
<5>[1663901.281328] UBI: number of good PEBs:        120
<5>[1663901.286130] UBI: number of bad PEBs:         0
<5>[1663901.290765] UBI: number of corrupted PEBs:   0
<5>[1663901.295394] UBI: max. allowed volumes:       128
<5>[1663901.300203] UBI: wear-leveling threshold:    4096
<5>[1663901.305094] UBI: number of internal volumes: 1
<5>[1663901.309729] UBI: number of user volumes:     1
<5>[1663901.314363] UBI: available PEBs:             0
<5>[1663901.319013] UBI: total number of reserved PEBs: 120
<5>[1663901.324078] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1663901.330303] UBI: max/mean erase counter: 5/4
<5>[1663901.334757] UBI: image sequence number:  1872325126
<5>[1663901.339869] UBI: background thread "ubi_bgt2d" started, PID 19632
<5>[1663901.464453] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1663901.470681] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1663901.478457] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1663901.485981] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1663901.492016] UBIFS: default compressor: lzo
<5>[1663901.496297] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1663901.706977] UBIFS: un-mount UBI device 2, volume 0
<5>[1663901.779392] UBI: mtd6 is detached from ubi2
<5>[1685501.190765] UBI: attaching mtd6 to ubi2
<5>[1685501.194792] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1685501.201281] UBI: logical eraseblock size:    126976 bytes
<5>[1685501.206928] UBI: smallest flash I/O unit:    2048
<5>[1685501.211838] UBI: VID header offset:          2048 (aligned 2048)
<5>[1685501.218036] UBI: data offset:                4096
<5>[1685501.326285] UBI: max. sequence number:       414
<5>[1685501.341778] UBI: attached mtd6 to ubi2
<5>[1685501.345719] UBI: MTD device name:            "config"
<5>[1685501.350982] UBI: MTD device size:            15 MiB
<5>[1685501.356048] UBI: number of good PEBs:        120
<5>[1685501.360863] UBI: number of bad PEBs:         0
<5>[1685501.365493] UBI: number of corrupted PEBs:   0
<5>[1685501.370130] UBI: max. allowed volumes:       128
<5>[1685501.374933] UBI: wear-leveling threshold:    4096
<5>[1685501.379830] UBI: number of internal volumes: 1
<5>[1685501.384459] UBI: number of user volumes:     1
<5>[1685501.389095] UBI: available PEBs:             0
<5>[1685501.393724] UBI: total number of reserved PEBs: 120
<5>[1685501.398787] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1685501.404992] UBI: max/mean erase counter: 5/4
<5>[1685501.409453] UBI: image sequence number:  1872325126
<5>[1685501.414532] UBI: background thread "ubi_bgt2d" started, PID 523
<5>[1685501.541500] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1685501.547703] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1685501.555488] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1685501.563005] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1685501.569038] UBIFS: default compressor: lzo
<5>[1685501.573320] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1685501.785049] UBIFS: un-mount UBI device 2, volume 0
<5>[1685501.849468] UBI: mtd6 is detached from ubi2
<5>[1707101.261984] UBI: attaching mtd6 to ubi2
<5>[1707101.266003] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1707101.272506] UBI: logical eraseblock size:    126976 bytes
<5>[1707101.278095] UBI: smallest flash I/O unit:    2048
<5>[1707101.282998] UBI: VID header offset:          2048 (aligned 2048)
<5>[1707101.289314] UBI: data offset:                4096
<5>[1707101.397451] UBI: max. sequence number:       415
<5>[1707101.412927] UBI: attached mtd6 to ubi2
<5>[1707101.416868] UBI: MTD device name:            "config"
<5>[1707101.422135] UBI: MTD device size:            15 MiB
<5>[1707101.427199] UBI: number of good PEBs:        120
<5>[1707101.432015] UBI: number of bad PEBs:         0
<5>[1707101.436645] UBI: number of corrupted PEBs:   0
<5>[1707101.441283] UBI: max. allowed volumes:       128
<5>[1707101.446086] UBI: wear-leveling threshold:    4096
<5>[1707101.450982] UBI: number of internal volumes: 1
<5>[1707101.455611] UBI: number of user volumes:     1
<5>[1707101.460270] UBI: available PEBs:             0
<5>[1707101.464900] UBI: total number of reserved PEBs: 120
<5>[1707101.469973] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1707101.476170] UBI: max/mean erase counter: 5/4
<5>[1707101.480630] UBI: image sequence number:  1872325126
<5>[1707101.485709] UBI: background thread "ubi_bgt2d" started, PID 13661
<5>[1707101.612390] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1707101.618594] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1707101.626385] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1707101.633901] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1707101.639937] UBIFS: default compressor: lzo
<5>[1707101.644219] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1707101.866539] UBIFS: un-mount UBI device 2, volume 0
<5>[1707101.915498] UBI: mtd6 is detached from ubi2
<5>[1728701.343610] UBI: attaching mtd6 to ubi2
<5>[1728701.347637] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1728701.354124] UBI: logical eraseblock size:    126976 bytes
<5>[1728701.359736] UBI: smallest flash I/O unit:    2048
<5>[1728701.364629] UBI: VID header offset:          2048 (aligned 2048)
<5>[1728701.370836] UBI: data offset:                4096
<5>[1728701.479247] UBI: max. sequence number:       416
<5>[1728701.495746] UBI: attached mtd6 to ubi2
<5>[1728701.499733] UBI: MTD device name:            "config"
<5>[1728701.504998] UBI: MTD device size:            15 MiB
<5>[1728701.510090] UBI: number of good PEBs:        120
<5>[1728701.514901] UBI: number of bad PEBs:         0
<5>[1728701.519565] UBI: number of corrupted PEBs:   0
<5>[1728701.524206] UBI: max. allowed volumes:       128
<5>[1728701.529028] UBI: wear-leveling threshold:    4096
<5>[1728701.533919] UBI: number of internal volumes: 1
<5>[1728701.538546] UBI: number of user volumes:     1
<5>[1728701.543184] UBI: available PEBs:             0
<5>[1728701.547813] UBI: total number of reserved PEBs: 120
<5>[1728701.552888] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1728701.559090] UBI: max/mean erase counter: 5/4
<5>[1728701.563545] UBI: image sequence number:  1872325126
<5>[1728701.568765] UBI: background thread "ubi_bgt2d" started, PID 26279
<5>[1728701.693079] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1728701.699304] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1728701.707090] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1728701.714628] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1728701.720671] UBIFS: default compressor: lzo
<5>[1728701.724953] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1728701.935404] UBIFS: un-mount UBI device 2, volume 0
<5>[1728701.999881] UBI: mtd6 is detached from ubi2
<5>[1750301.408411] UBI: attaching mtd6 to ubi2
<5>[1750301.412473] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1750301.418945] UBI: logical eraseblock size:    126976 bytes
<5>[1750301.424531] UBI: smallest flash I/O unit:    2048
<5>[1750301.429433] UBI: VID header offset:          2048 (aligned 2048)
<5>[1750301.435629] UBI: data offset:                4096
<5>[1750301.544304] UBI: max. sequence number:       417
<5>[1750301.559783] UBI: attached mtd6 to ubi2
<5>[1750301.563726] UBI: MTD device name:            "config"
<5>[1750301.568991] UBI: MTD device size:            15 MiB
<5>[1750301.574057] UBI: number of good PEBs:        120
<5>[1750301.578870] UBI: number of bad PEBs:         0
<5>[1750301.583499] UBI: number of corrupted PEBs:   0
<5>[1750301.588127] UBI: max. allowed volumes:       128
<5>[1750301.592942] UBI: wear-leveling threshold:    4096
<5>[1750301.597832] UBI: number of internal volumes: 1
<5>[1750301.602470] UBI: number of user volumes:     1
<5>[1750301.607099] UBI: available PEBs:             0
<5>[1750301.611737] UBI: total number of reserved PEBs: 120
<5>[1750301.616807] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1750301.623019] UBI: max/mean erase counter: 5/4
<5>[1750301.627474] UBI: image sequence number:  1872325126
<5>[1750301.632577] UBI: background thread "ubi_bgt2d" started, PID 6372
<5>[1750301.756002] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1750301.762233] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1750301.770015] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1750301.777525] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1750301.783559] UBIFS: default compressor: lzo
<5>[1750301.787841] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1750302.008275] UBIFS: un-mount UBI device 2, volume 0
<5>[1750302.085424] UBI: mtd6 is detached from ubi2
<5>[1771901.503201] UBI: attaching mtd6 to ubi2
<5>[1771901.507234] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1771901.513763] UBI: logical eraseblock size:    126976 bytes
<5>[1771901.519379] UBI: smallest flash I/O unit:    2048
<5>[1771901.524271] UBI: VID header offset:          2048 (aligned 2048)
<5>[1771901.530478] UBI: data offset:                4096
<5>[1771901.638557] UBI: max. sequence number:       418
<5>[1771901.654312] UBI: attached mtd6 to ubi2
<5>[1771901.658255] UBI: MTD device name:            "config"
<5>[1771901.663532] UBI: MTD device size:            15 MiB
<5>[1771901.668597] UBI: number of good PEBs:        120
<5>[1771901.673418] UBI: number of bad PEBs:         0
<5>[1771901.678064] UBI: number of corrupted PEBs:   0
<5>[1771901.682712] UBI: max. allowed volumes:       128
<5>[1771901.687519] UBI: wear-leveling threshold:    4096
<5>[1771901.692426] UBI: number of internal volumes: 1
<5>[1771901.697056] UBI: number of user volumes:     1
<5>[1771901.701697] UBI: available PEBs:             0
<5>[1771901.706327] UBI: total number of reserved PEBs: 120
<5>[1771901.711405] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1771901.717602] UBI: max/mean erase counter: 5/4
<5>[1771901.722067] UBI: image sequence number:  1872325126
<5>[1771901.727169] UBI: background thread "ubi_bgt2d" started, PID 19496
<5>[1771901.851507] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1771901.857710] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1771901.865500] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1771901.873021] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1771901.879054] UBIFS: default compressor: lzo
<5>[1771901.883337] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1771902.118003] UBIFS: un-mount UBI device 2, volume 0
<5>[1771902.175359] UBI: mtd6 is detached from ubi2
<5>[1793501.554214] UBI: attaching mtd6 to ubi2
<5>[1793501.558240] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1793501.564750] UBI: logical eraseblock size:    126976 bytes
<5>[1793501.570352] UBI: smallest flash I/O unit:    2048
<5>[1793501.575249] UBI: VID header offset:          2048 (aligned 2048)
<5>[1793501.581456] UBI: data offset:                4096
<5>[1793501.689308] UBI: max. sequence number:       419
<5>[1793501.704761] UBI: attached mtd6 to ubi2
<5>[1793501.708707] UBI: MTD device name:            "config"
<5>[1793501.713989] UBI: MTD device size:            15 MiB
<5>[1793501.719066] UBI: number of good PEBs:        120
<5>[1793501.723869] UBI: number of bad PEBs:         0
<5>[1793501.728497] UBI: number of corrupted PEBs:   0
<5>[1793501.733138] UBI: max. allowed volumes:       128
<5>[1793501.737945] UBI: wear-leveling threshold:    4096
<5>[1793501.742845] UBI: number of internal volumes: 1
<5>[1793501.747475] UBI: number of user volumes:     1
<5>[1793501.752116] UBI: available PEBs:             0
<5>[1793501.756745] UBI: total number of reserved PEBs: 120
<5>[1793501.761823] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1793501.768020] UBI: max/mean erase counter: 5/4
<5>[1793501.772486] UBI: image sequence number:  1872325126
<5>[1793501.777563] UBI: background thread "ubi_bgt2d" started, PID 32700
<5>[1793501.907760] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1793501.913995] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1793501.921771] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1793501.929282] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1793501.935305] UBIFS: default compressor: lzo
<5>[1793501.939593] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1793502.152208] UBIFS: un-mount UBI device 2, volume 0
<5>[1793502.219760] UBI: mtd6 is detached from ubi2
<5>[1815101.633976] UBI: attaching mtd6 to ubi2
<5>[1815101.638018] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1815101.644526] UBI: logical eraseblock size:    126976 bytes
<5>[1815101.650133] UBI: smallest flash I/O unit:    2048
<5>[1815101.655030] UBI: VID header offset:          2048 (aligned 2048)
<5>[1815101.661241] UBI: data offset:                4096
<5>[1815101.769426] UBI: max. sequence number:       420
<5>[1815101.784885] UBI: attached mtd6 to ubi2
<5>[1815101.788828] UBI: MTD device name:            "config"
<5>[1815101.794102] UBI: MTD device size:            15 MiB
<5>[1815101.799177] UBI: number of good PEBs:        120
<5>[1815101.803980] UBI: number of bad PEBs:         0
<5>[1815101.808608] UBI: number of corrupted PEBs:   0
<5>[1815101.813247] UBI: max. allowed volumes:       128
<5>[1815101.818050] UBI: wear-leveling threshold:    4096
<5>[1815101.822948] UBI: number of internal volumes: 1
<5>[1815101.827577] UBI: number of user volumes:     1
<5>[1815101.832215] UBI: available PEBs:             0
<5>[1815101.836844] UBI: total number of reserved PEBs: 120
<5>[1815101.841920] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1815101.848122] UBI: max/mean erase counter: 5/4
<5>[1815101.852593] UBI: image sequence number:  1872325126
<5>[1815101.857671] UBI: background thread "ubi_bgt2d" started, PID 12793
<5>[1815101.983982] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1815101.990242] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1815101.998009] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1815102.005535] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1815102.011574] UBIFS: default compressor: lzo
<5>[1815102.015856] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1815102.226325] UBIFS: un-mount UBI device 2, volume 0
<5>[1815102.298376] UBI: mtd6 is detached from ubi2
<5>[1821574.695759] UBI: attaching mtd6 to ubi2
<5>[1821574.699833] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1821574.706309] UBI: logical eraseblock size:    126976 bytes
<5>[1821574.711927] UBI: smallest flash I/O unit:    2048
<5>[1821574.716830] UBI: VID header offset:          2048 (aligned 2048)
<5>[1821574.723057] UBI: data offset:                4096
<5>[1821574.835885] UBI: max. sequence number:       421
<5>[1821574.851453] UBI: attached mtd6 to ubi2
<5>[1821574.855397] UBI: MTD device name:            "config"
<5>[1821574.860672] UBI: MTD device size:            15 MiB
<5>[1821574.865738] UBI: number of good PEBs:        120
<5>[1821574.870557] UBI: number of bad PEBs:         0
<5>[1821574.875186] UBI: number of corrupted PEBs:   0
<5>[1821574.879836] UBI: max. allowed volumes:       128
<5>[1821574.884639] UBI: wear-leveling threshold:    4096
<5>[1821574.889546] UBI: number of internal volumes: 1
<5>[1821574.894181] UBI: number of user volumes:     1
<5>[1821574.898849] UBI: available PEBs:             0
<5>[1821574.903495] UBI: total number of reserved PEBs: 120
<5>[1821574.908588] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1821574.914793] UBI: max/mean erase counter: 5/4
<5>[1821574.919279] UBI: image sequence number:  1872325126
<5>[1821574.924454] UBI: background thread "ubi_bgt2d" started, PID 14938
<5>[1821575.055901] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1821575.062137] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1821575.069932] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1821575.077441] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1821575.083487] UBIFS: default compressor: lzo
<5>[1821575.087782] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1821575.373226] UBIFS: un-mount UBI device 2, volume 0
<5>[1821575.451167] UBI: mtd6 is detached from ubi2
<5>[1843178.970821] UBI: attaching mtd6 to ubi2
<5>[1843178.974867] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1843178.981379] UBI: logical eraseblock size:    126976 bytes
<5>[1843178.986974] UBI: smallest flash I/O unit:    2048
<5>[1843178.991902] UBI: VID header offset:          2048 (aligned 2048)
<5>[1843178.998129] UBI: data offset:                4096
<5>[1843179.110495] UBI: max. sequence number:       422
<5>[1843179.125937] UBI: attached mtd6 to ubi2
<5>[1843179.129914] UBI: MTD device name:            "config"
<5>[1843179.135158] UBI: MTD device size:            15 MiB
<5>[1843179.140248] UBI: number of good PEBs:        120
<5>[1843179.145053] UBI: number of bad PEBs:         0
<5>[1843179.149696] UBI: number of corrupted PEBs:   0
<5>[1843179.154326] UBI: max. allowed volumes:       128
<5>[1843179.159148] UBI: wear-leveling threshold:    4096
<5>[1843179.164038] UBI: number of internal volumes: 1
<5>[1843179.168676] UBI: number of user volumes:     1
<5>[1843179.173305] UBI: available PEBs:             0
<5>[1843179.177943] UBI: total number of reserved PEBs: 120
<5>[1843179.183008] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1843179.189214] UBI: max/mean erase counter: 5/4
<5>[1843179.193673] UBI: image sequence number:  1872325126
<5>[1843179.199350] UBI: background thread "ubi_bgt2d" started, PID 18437
<5>[1843179.318544] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1843179.324756] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1843179.332545] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1843179.340062] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1843179.346085] UBIFS: default compressor: lzo
<5>[1843179.350376] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1843179.560996] UBIFS: un-mount UBI device 2, volume 0
<5>[1843183.100319] UBI: mtd6 is detached from ubi2
<5>[1857577.288933] rpc-srv/tcp: nfsd: sent only 8324 when sending 32900 bytes - shutting down socket
<5>[1864774.717823] UBI: attaching mtd6 to ubi2
<5>[1864774.721850] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1864774.728329] UBI: logical eraseblock size:    126976 bytes
<5>[1864774.733917] UBI: smallest flash I/O unit:    2048
<5>[1864774.738819] UBI: VID header offset:          2048 (aligned 2048)
<5>[1864774.745015] UBI: data offset:                4096
<5>[1864774.852870] UBI: max. sequence number:       426
<5>[1864774.868369] UBI: attached mtd6 to ubi2
<5>[1864774.872312] UBI: MTD device name:            "config"
<5>[1864774.877551] UBI: MTD device size:            15 MiB
<5>[1864774.882641] UBI: number of good PEBs:        120
<5>[1864774.887449] UBI: number of bad PEBs:         0
<5>[1864774.892090] UBI: number of corrupted PEBs:   0
<5>[1864774.896720] UBI: max. allowed volumes:       128
<5>[1864774.901533] UBI: wear-leveling threshold:    4096
<5>[1864774.906423] UBI: number of internal volumes: 1
<5>[1864774.911059] UBI: number of user volumes:     1
<5>[1864774.915687] UBI: available PEBs:             0
<5>[1864774.920319] UBI: total number of reserved PEBs: 120
<5>[1864774.925383] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1864774.931583] UBI: max/mean erase counter: 5/4
<5>[1864774.936041] UBI: image sequence number:  1872325126
<5>[1864774.941136] UBI: background thread "ubi_bgt2d" started, PID 31405
<5>[1864775.069638] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1864775.075840] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1864775.083635] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1864775.091162] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1864775.097186] UBIFS: default compressor: lzo
<5>[1864775.101475] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1864775.312155] UBIFS: un-mount UBI device 2, volume 0
<5>[1864775.378158] UBI: mtd6 is detached from ubi2
<5>[1886374.793656] UBI: attaching mtd6 to ubi2
<5>[1886374.797713] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1886374.804176] UBI: logical eraseblock size:    126976 bytes
<5>[1886374.809777] UBI: smallest flash I/O unit:    2048
<5>[1886374.814671] UBI: VID header offset:          2048 (aligned 2048)
<5>[1886374.820884] UBI: data offset:                4096
<5>[1886374.928756] UBI: max. sequence number:       427
<5>[1886374.944196] UBI: attached mtd6 to ubi2
<5>[1886374.948168] UBI: MTD device name:            "config"
<5>[1886374.953408] UBI: MTD device size:            15 MiB
<5>[1886374.958480] UBI: number of good PEBs:        120
<5>[1886374.963282] UBI: number of bad PEBs:         0
<5>[1886374.967920] UBI: number of corrupted PEBs:   0
<5>[1886374.972549] UBI: max. allowed volumes:       128
<5>[1886374.977351] UBI: wear-leveling threshold:    4096
<5>[1886374.982248] UBI: number of internal volumes: 1
<5>[1886374.986876] UBI: number of user volumes:     1
<5>[1886374.991518] UBI: available PEBs:             0
<5>[1886374.996147] UBI: total number of reserved PEBs: 120
<5>[1886375.001227] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1886375.007424] UBI: max/mean erase counter: 5/4
<5>[1886375.011887] UBI: image sequence number:  1872325126
<5>[1886375.016965] UBI: background thread "ubi_bgt2d" started, PID 11573
<5>[1886375.146282] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1886375.152538] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1886375.160330] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1886375.167856] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1886375.173893] UBIFS: default compressor: lzo
<5>[1886375.178182] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1886375.390255] UBIFS: un-mount UBI device 2, volume 0
<5>[1886375.454581] UBI: mtd6 is detached from ubi2
<5>[1907974.870452] UBI: attaching mtd6 to ubi2
<5>[1907974.874478] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1907974.880980] UBI: logical eraseblock size:    126976 bytes
<5>[1907974.886573] UBI: smallest flash I/O unit:    2048
<5>[1907974.891481] UBI: VID header offset:          2048 (aligned 2048)
<5>[1907974.897689] UBI: data offset:                4096
<5>[1907975.005706] UBI: max. sequence number:       428
<5>[1907975.021294] UBI: attached mtd6 to ubi2
<5>[1907975.025236] UBI: MTD device name:            "config"
<5>[1907975.030501] UBI: MTD device size:            15 MiB
<5>[1907975.035570] UBI: number of good PEBs:        120
<5>[1907975.040395] UBI: number of bad PEBs:         0
<5>[1907975.045024] UBI: number of corrupted PEBs:   0
<5>[1907975.049662] UBI: max. allowed volumes:       128
<5>[1907975.054465] UBI: wear-leveling threshold:    4096
<5>[1907975.059384] UBI: number of internal volumes: 1
<5>[1907975.064022] UBI: number of user volumes:     1
<5>[1907975.068667] UBI: available PEBs:             0
<5>[1907975.073296] UBI: total number of reserved PEBs: 120
<5>[1907975.078369] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1907975.084570] UBI: max/mean erase counter: 5/4
<5>[1907975.089032] UBI: image sequence number:  1872325126
<5>[1907975.094111] UBI: background thread "ubi_bgt2d" started, PID 27854
<5>[1907975.216316] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1907975.222544] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1907975.230327] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1907975.237842] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1907975.243870] UBIFS: default compressor: lzo
<5>[1907975.248166] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1907975.459868] UBIFS: un-mount UBI device 2, volume 0
<5>[1907975.534115] UBI: mtd6 is detached from ubi2
<5>[1929574.960568] UBI: attaching mtd6 to ubi2
<5>[1929574.964617] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1929574.971116] UBI: logical eraseblock size:    126976 bytes
<5>[1929574.976709] UBI: smallest flash I/O unit:    2048
<5>[1929574.981622] UBI: VID header offset:          2048 (aligned 2048)
<5>[1929574.987841] UBI: data offset:                4096
<5>[1929575.096266] UBI: max. sequence number:       429
<5>[1929575.111859] UBI: attached mtd6 to ubi2
<5>[1929575.115799] UBI: MTD device name:            "config"
<5>[1929575.121062] UBI: MTD device size:            15 MiB
<5>[1929575.126128] UBI: number of good PEBs:        120
<5>[1929575.130943] UBI: number of bad PEBs:         0
<5>[1929575.135645] UBI: number of corrupted PEBs:   0
<5>[1929575.140301] UBI: max. allowed volumes:       128
<5>[1929575.145104] UBI: wear-leveling threshold:    4096
<5>[1929575.150006] UBI: number of internal volumes: 1
<5>[1929575.154637] UBI: number of user volumes:     1
<5>[1929575.159358] UBI: available PEBs:             0
<5>[1929575.163991] UBI: total number of reserved PEBs: 120
<5>[1929575.169071] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1929575.175267] UBI: max/mean erase counter: 5/4
<5>[1929575.179729] UBI: image sequence number:  1872325126
<5>[1929575.184808] UBI: background thread "ubi_bgt2d" started, PID 19468
<5>[1929575.317552] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1929575.323796] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1929575.331589] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1929575.339124] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1929575.345154] UBIFS: default compressor: lzo
<5>[1929575.349471] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1929575.559620] UBIFS: un-mount UBI device 2, volume 0
<5>[1929575.632282] UBI: mtd6 is detached from ubi2
<5>[1945447.203705] rpc-srv/tcp: nfsd: sent only 132 when sending 32900 bytes - shutting down socket
<5>[1951175.025794] UBI: attaching mtd6 to ubi2
<5>[1951175.029870] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1951175.036339] UBI: logical eraseblock size:    126976 bytes
<5>[1951175.041940] UBI: smallest flash I/O unit:    2048
<5>[1951175.046830] UBI: VID header offset:          2048 (aligned 2048)
<5>[1951175.053107] UBI: data offset:                4096
<5>[1951175.161066] UBI: max. sequence number:       430
<5>[1951175.178251] UBI: attached mtd6 to ubi2
<5>[1951175.182200] UBI: MTD device name:            "config"
<5>[1951175.187452] UBI: MTD device size:            15 MiB
<5>[1951175.192551] UBI: number of good PEBs:        120
<5>[1951175.197360] UBI: number of bad PEBs:         0
<5>[1951175.202004] UBI: number of corrupted PEBs:   0
<5>[1951175.206633] UBI: max. allowed volumes:       128
<5>[1951175.211447] UBI: wear-leveling threshold:    4096
<5>[1951175.216337] UBI: number of internal volumes: 1
<5>[1951175.220976] UBI: number of user volumes:     1
<5>[1951175.225605] UBI: available PEBs:             0
<5>[1951175.230248] UBI: total number of reserved PEBs: 120
<5>[1951175.235321] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1951175.241554] UBI: max/mean erase counter: 5/4
<5>[1951175.246013] UBI: image sequence number:  1872325126
<5>[1951175.251125] UBI: background thread "ubi_bgt2d" started, PID 9145
<5>[1951175.375443] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1951175.381669] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1951175.389452] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1951175.396956] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1951175.402988] UBIFS: default compressor: lzo
<5>[1951175.407270] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1951175.618969] UBIFS: un-mount UBI device 2, volume 0
<5>[1951175.674488] UBI: mtd6 is detached from ubi2
<5>[1972775.102436] UBI: attaching mtd6 to ubi2
<5>[1972775.106463] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1972775.112966] UBI: logical eraseblock size:    126976 bytes
<5>[1972775.118573] UBI: smallest flash I/O unit:    2048
<5>[1972775.123469] UBI: VID header offset:          2048 (aligned 2048)
<5>[1972775.129678] UBI: data offset:                4096
<5>[1972775.237615] UBI: max. sequence number:       431
<5>[1972775.254638] UBI: attached mtd6 to ubi2
<5>[1972775.258607] UBI: MTD device name:            "config"
<5>[1972775.263857] UBI: MTD device size:            15 MiB
<5>[1972775.268936] UBI: number of good PEBs:        120
<5>[1972775.273772] UBI: number of bad PEBs:         0
<5>[1972775.278411] UBI: number of corrupted PEBs:   0
<5>[1972775.283040] UBI: max. allowed volumes:       128
<5>[1972775.287848] UBI: wear-leveling threshold:    4096
<5>[1972775.292736] UBI: number of internal volumes: 1
<5>[1972775.297364] UBI: number of user volumes:     1
<5>[1972775.301995] UBI: available PEBs:             0
<5>[1972775.306623] UBI: total number of reserved PEBs: 120
<5>[1972775.311691] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1972775.317890] UBI: max/mean erase counter: 5/4
<5>[1972775.322344] UBI: image sequence number:  1872325126
<5>[1972775.327424] UBI: background thread "ubi_bgt2d" started, PID 22067
<5>[1972775.454727] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1972775.460946] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1972775.468718] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1972775.476221] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1972775.482248] UBIFS: default compressor: lzo
<5>[1972775.486534] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1972775.698179] UBIFS: un-mount UBI device 2, volume 0
<5>[1972775.757720] UBI: mtd6 is detached from ubi2
[Diagnostic] Fri Mar 13 11:25:45 CET 2020, 510.37
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000180] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060215] Mount-cache hash table entries: 512
<6>[    0.060716] Initializing cgroup subsys cpuacct
<6>[    0.060746] Initializing cgroup subsys devices
<6>[    0.060779] CPU: Testing write buffer coherency: ok
<6>[    0.060942] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060967] Calibrating local timer... 299.87MHz.
<4>[    0.120065]  Creating cpu1_hotplug_thread....
<4>[    0.120154]  cpu1_hotplug_thread Created
<6>[    0.120170] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121574] CPU1: Booted secondary processor
<6>[    0.180041] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180098] Brought up 2 CPUs
<6>[    0.180111] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180792] devtmpfs: initialized
<6>[    0.182205] xor: measuring software checksum speed
<6>[    0.229992]    arm4regs  :  2129.200 MB/sec
<6>[    0.279970]    8regs     :  1438.000 MB/sec
<6>[    0.329948]    32regs    :  1409.600 MB/sec
<6>[    0.329955] xor: using function: arm4regs (2129.200 MB/sec)
<6>[    0.330159] NET: Registered protocol family 16
<6>[    0.330640] L310 cache controller enabled
<6>[    0.330652] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330731] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330736] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330749] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330757] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331259] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331268] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331283] Power Management Mode Support For C2000: 
<6>[    0.331593] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347648] PCIe0: Link Up Success 
<6>[    0.347654] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347660] comcerto_pcie_rc_int_init
<6>[    0.347702] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338289] PCIe1: Link Up Failed 
<7>[    4.338429] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338489] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338505] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338625] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338724] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338734] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338747] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350161] bio: create slab <bio-0> at 0
<4>[    4.519766] raid6: int32x1     25 MB/s
<4>[    4.688233] raid6: int32x2     48 MB/s
<4>[    4.858603] raid6: int32x4     82 MB/s
<4>[    5.028466] raid6: int32x8    113 MB/s
<4>[    5.028471] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028645] vgaarb: loaded
<5>[    5.028972] SCSI subsystem initialized
<7>[    5.029104] libata version 3.00 loaded.
<6>[    5.029265] usbcore: registered new interface driver usbfs
<6>[    5.029345] usbcore: registered new interface driver hub
<6>[    5.029433] usbcore: registered new device driver usb
<6>[    5.029655] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.030075] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030455] Switching to clocksource timer2
<5>[    5.030671] FS-Cache: Loaded
<6>[    5.030812] CacheFiles: Loaded
<6>[    5.031693] NET: Registered protocol family 2
<6>[    5.031891] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032551] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032735] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032899] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032906] TCP reno registered
<6>[    5.032915] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032945] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.033195] NET: Registered protocol family 1
<6>[    5.033493] RPC: Registered named UNIX socket transport module.
<6>[    5.033501] RPC: Registered udp transport module.
<6>[    5.033506] RPC: Registered tcp transport module.
<6>[    5.033511] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033534] PCI: CLS 32 bytes, default 32
<6>[    6.073308] membuf_init: created membuf device(253, 0)
<6>[    6.073597] audit: initializing netlink socket (disabled)
<5>[    6.073625] type=2000 audit(6.070:1): initialized
<5>[    6.074575] VFS: Disk quotas dquot_6.5.2
<4>[    6.074714] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.075324] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.075592] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.076262] fuse init (API version 7.17)
<6>[    6.076446] msgmni has been set to 932
<6>[    6.078121] async_tx: api initialized (async)
<6>[    6.078233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.078243] io scheduler noop registered
<6>[    6.078248] io scheduler deadline registered
<6>[    6.078323] io scheduler cfq registered (default)
<6>[    6.078633] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.078983] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.375138] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025727] console [ttyS0] enabled
<6>[    7.165117] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.261854] brd: module loaded
<6>[    7.350907] loop: module loaded
<6>[    7.355431] nbd: registered device at major 43
<6>[    7.365161] SCSI Media Changer driver v0.25 
<7>[    7.369545] ahci 0000:00:00.0: version 3.0
<4>[    7.369564] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.375322] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.382355] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.387890] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.396018] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.405075] scsi0 : ahci
<6>[    7.407982] scsi1 : ahci
<6>[    7.410708] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.418040] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.425505] SATA Serdes: 48Mhz ref clk
<6>[    7.429751] Serdes2: Lane OK Passed
<4>[    7.433266] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.437951] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.445727] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.454302] scsi2 : ahci_platform
<6>[    7.457840] scsi3 : ahci_platform
<6>[    7.461327] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.469269] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.478128] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.487498] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.495392] Fixed MDIO Bus: probed
<6>[    7.498854] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.703053] Core Release: 2.81a
<4>[    7.706205] Setting default values for core params
<6>[    7.820497] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.825954] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.910786] Using Buffer DMA mode
<4>[    7.914110] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.919957] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.925551] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.929948] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.934755] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.934769] drivers/usb/core/inode.c: creating file '001'
<6>[    7.934782] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.941883] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.947272] Init: Port Power? op_state=1
<4>[    7.951211] Init: Power Port (0)
<7>[    7.954482] usb usb1: default language 0x0409
<7>[    7.954500] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.954507] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.961324] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.968566] usb usb1: Product: DWC OTG Controller
<6>[    7.970505] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.979497] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.984841] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.989228] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.996051] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    8.003641] usb usb1: usb_probe_device
<7>[    8.003651] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.003676] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.003763] hub 1-0:1.0: usb_probe_interface
<7>[    8.003769] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.003776] hub 1-0:1.0: USB hub found
<6>[    8.003981] ata1.00: configured for UDMA/133
<6>[    8.011851] hub 1-0:1.0: 1 port detected
<7>[    8.015785] hub 1-0:1.0: standalone hub
<7>[    8.015790] hub 1-0:1.0: ganged power switching
<7>[    8.015796] hub 1-0:1.0: individual port over-current protection
<7>[    8.015802] hub 1-0:1.0: Single TT
<7>[    8.015808] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.015815] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.015829] hub 1-0:1.0: local power source is good
<7>[    8.015835] hub 1-0:1.0: enabling power on all ports
<7>[    8.016018] drivers/usb/core/inode.c: creating file '001'
<7>[    8.016145] Module dwc_common_port init
<6>[    8.016292] mousedev: PS/2 mouse device common for all mice
<5>[    8.016318] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.016331] ata1.00: set queue depth = 31
<4>[    8.016506] Check proc_name[ahci].
<5>[    8.037636] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<6>[    8.037700] i2c /dev entries driver
<4>[    8.037803] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.038148] comcerto_wdt: support registered
<6>[    8.038182] md: linear personality registered for level -1
<6>[    8.038187] md: raid0 personality registered for level 0
<6>[    8.038192] md: raid1 personality registered for level 1
<6>[    8.038197] md: raid10 personality registered for level 10
<6>[    8.038202] md: raid6 personality registered for level 6
<6>[    8.038207] md: raid5 personality registered for level 5
<6>[    8.038212] md: raid4 personality registered for level 4
<6>[    8.038217] md: multipath personality registered for level -4
<5>[    8.104113] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.109457] sd 0:0:0:0: Attached scsi generic sg0 type 0
<4>[    8.114883] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.114887] 
<6>[    8.114947] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.131816] dm_crypt using the OCF for crypto acceleration.
<7>[    8.131845] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<5>[    8.132050] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.132059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.132121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.151723] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.157262] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.163834] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.170466] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.178831]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.183221] ALSA device list:
<6>[    8.186202]   No soundcards found.
<5>[    8.186882] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.194876] TCP cubic registered
<6>[    8.198116] NET: Registered protocol family 17
<6>[    8.202610] NET: Registered protocol family 15
<6>[    8.207065] Initializing NETLINK_KEY socket
<6>[    8.211276] NET: Registered protocol family 5
<6>[    8.215736] lib80211: common routines for IEEE802.11 drivers
<7>[    8.221421] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.221427] Registering the dns_resolver key type
<6>[    8.226172] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.233877] Clocks: disabled unused pll2
<6>[    8.237810] Clocks: disabled unused uart
<6>[    8.241747] Clocks: disabled unused gemtx
<6>[    8.245766] Clocks: disabled unused ipsec_spacc
<6>[    8.250308] Clocks: disabled unused dpi_cie
<6>[    8.254504] Clocks: disabled unused dpi_decomp
<6>[    8.258960] Clocks: disabled unused ntgref
<6>[    8.263070] Clocks: disabled unused pcie1
<6>[    8.267089] Clocks: disabled unused usb1
<6>[    8.271026] Clocks: disabled unused ext_phy0
<6>[    8.275306] Clocks: disabled unused ext_phy1
<6>[    8.279585] Clocks: disabled unused ext_phy2
<6>[    8.283869] Clocks: disabled unused tpi
<6>[    8.287714] Clocks: disabled unused csys
<7>[    8.290505] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290519] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290523] 
<7>[    8.290532] hub 1-0:1.0: over-current change on port 1
<6>[    8.300115] Clocks: disabled unused tsuntg
<6>[    8.304225] Clocks: disabled unused sata_occ
<6>[    8.308505] Clocks: disabled unused pcie_occ
<6>[    8.312789] Clocks: disabled unused sgmii_occ
<7>[    8.400508] hub 1-0:1.0: enabling power on all ports
<4>[    8.509756] Registering CPUFreq(comcerto)
<4>[    8.514104] Please be patient, while OpenWrt loads ...
<6>[    8.680513] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.687331] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.694155] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.702061] ata2.00: configured for UDMA/133
<5>[    8.706720] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.714860] ata2.00: set queue depth = 31
<4>[    8.719080] Check proc_name[ahci].
<5>[    8.722708] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.722809] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.735898] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.741402] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.746210] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.746286] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.789036]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.794455] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.816643] Freeing init memory: 13476K
<6>[    9.333106] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.339841] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.600551] RTC_TIME:Fri Mar 13 11:17:19 2020  0.000000 seconds
<6>[    9.630542] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.635193] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.641159] Creating 2 MTD partitions on "spi0.0":
<5>[    9.645967] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.651742] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.662066] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.669150] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.674343] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.682983] Using default values for hw ecc
<4>[    9.690604] Bad block table not found for chip 0
<4>[    9.698605] Bad block table not found for chip 0
<6>[    9.703239] Scanning device for bad blocks
<4>[    9.708381] Bad eraseblock 18 at 0x000000240000
<4>[    9.715863] Bad eraseblock 72 at 0x000000900000
<4>[    9.735513] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.741829] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.772667] Bad eraseblock 863 at 0x000006be0000
<4>[    9.798276] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.818000] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.965643] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.975157] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.981473] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.987932] Creating 5 MTD partitions on "comcertonand":
<5>[    9.993266] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.999544] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[   10.005927] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[   10.012134] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[   10.018478] 0x00001f000000-0x00001ff00000 : "config"
<6>[   10.031484] usbcore: registered new interface driver usbhid
<6>[   10.037073] usbhid: USB HID core driver
<6>[   10.046554] usbcore: registered new interface driver usblp
<6>[   10.059105] ## xhci_plat_probe
<6>[   10.062210] ### comcerto_start_xhci
<6>[   10.065718] USB3.0 clock selected: internal
<6>[   10.073163] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.078072] drivers/usb/core/inode.c: creating file '002'
<6>[   10.078094] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.085318] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.090691] usb usb2: default language 0x0409
<7>[   10.090709] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.090716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.097524] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.104774] usb usb2: Product: xHCI Host Controller
<6>[   10.109664] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.115081] usb usb2: SerialNumber: xhci-hcd
<7>[   10.119618] usb usb2: usb_probe_device
<7>[   10.119628] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.119639] xHCI xhci_add_endpoint called for root hub
<7>[   10.119645] xHCI xhci_check_bandwidth called for root hub
<7>[   10.119665] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.119762] hub 2-0:1.0: usb_probe_interface
<7>[   10.119769] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.119776] hub 2-0:1.0: USB hub found
<6>[   10.123567] hub 2-0:1.0: 1 port detected
<7>[   10.127501] hub 2-0:1.0: standalone hub
<7>[   10.127506] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.127511] hub 2-0:1.0: individual port over-current protection
<7>[   10.127517] hub 2-0:1.0: Single TT
<7>[   10.127524] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.127531] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.127544] hub 2-0:1.0: local power source is good
<7>[   10.127551] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.127702] drivers/usb/core/inode.c: creating file '001'
<6>[   10.127771] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.132699] drivers/usb/core/inode.c: creating file '003'
<6>[   10.132714] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.139811] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.139828] usb usb3: default language 0x0409
<7>[   10.139845] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.139851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.146677] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.153932] usb usb3: Product: xHCI Host Controller
<6>[   10.158821] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.164239] usb usb3: SerialNumber: xhci-hcd
<7>[   10.168751] usb usb3: usb_probe_device
<7>[   10.168761] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.168770] xHCI xhci_add_endpoint called for root hub
<7>[   10.168776] xHCI xhci_check_bandwidth called for root hub
<7>[   10.168795] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.168892] hub 3-0:1.0: usb_probe_interface
<7>[   10.168899] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.168905] hub 3-0:1.0: USB hub found
<6>[   10.172689] hub 3-0:1.0: 1 port detected
<7>[   10.176621] hub 3-0:1.0: standalone hub
<7>[   10.176627] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.176632] hub 3-0:1.0: individual port over-current protection
<7>[   10.176640] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.176646] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.176659] hub 3-0:1.0: local power source is good
<7>[   10.176665] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.176803] drivers/usb/core/inode.c: creating file '001'
<6>[   10.184274] Initializing USB Mass Storage driver...
<6>[   10.189278] usbcore: registered new interface driver usb-storage
<6>[   10.195324] USB Mass Storage support registered.
<7>[   10.220540] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.270646] hub 3-0:1.0: port 1: status 0203 change 0031
<7>[   10.320707] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.320742] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.440557] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.462781] usb 2-1: default language 0x0409
<7>[   10.463325] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.463334] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.470061] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.477247] usb 2-1: Product: USB2.0 Hub
<6>[   10.481194] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.486006] usb 2-1: usb_probe_device
<7>[   10.486017] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.491836] usb 2-1: Successful Endpoint Configure command
<7>[   10.492094] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.492238] hub 2-1:1.0: usb_probe_interface
<7>[   10.492247] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.492254] hub 2-1:1.0: USB hub found
<6>[   10.496332] hub 2-1:1.0: 4 ports detected
<7>[   10.500361] hub 2-1:1.0: standalone hub
<7>[   10.500370] hub 2-1:1.0: individual port power switching
<7>[   10.500379] hub 2-1:1.0: individual port over-current protection
<7>[   10.523853] usb 2-1: Successful Endpoint Configure command
<7>[   10.524156] hub 2-1:1.0: TT per port
<7>[   10.524164] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.524171] hub 2-1:1.0: Port indicators are supported
<7>[   10.524178] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.524387] usb 2-1: Successful Endpoint Configure command
<7>[   10.524578] hub 2-1:1.0: local power source is good
<7>[   10.524591] hub 2-1:1.0: enabling power on all ports
<7>[   10.525418] drivers/usb/core/inode.c: creating file '002'
<7>[   10.525511] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.525533] hub 3-0:1.0: reset change on port 1
<7>[   10.525546] hub 3-0:1.0: port 1, status 0203, change 0010, 5.0 Gb/s
<4>[   10.580328] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.586752] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.621386] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.628363] flashcache: flashcache-1.0-dummy initialized
<6>[   10.640679] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.662444] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.662619] usb 3-1: default language 0x0409
<7>[   10.663151] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.663159] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.669886] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.677068] usb 3-1: Product: USB3.0 Hub
<6>[   10.681018] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.685841] usb 3-1: usb_probe_device
<7>[   10.685851] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.699805] usb 3-1: Successful Endpoint Configure command
<7>[   10.699981] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.700390] hub 3-1:1.0: usb_probe_interface
<7>[   10.700398] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.700404] hub 3-1:1.0: USB hub found
<6>[   10.704458] hub 3-1:1.0: 4 ports detected
<7>[   10.708484] hub 3-1:1.0: standalone hub
<7>[   10.708489] hub 3-1:1.0: individual port power switching
<7>[   10.708496] hub 3-1:1.0: individual port over-current protection
<7>[   10.708503] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.708510] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.708704] usb 3-1: Successful Endpoint Configure command
<7>[   10.708847] hub 3-1:1.0: local power source is good
<7>[   10.708957] hub 3-1:1.0: enabling power on all ports
<7>[   10.709695] drivers/usb/core/inode.c: creating file '002'
<7>[   10.720529] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.720740] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.798018] UBI: attaching mtd3 to ubi0
<6>[   10.800679] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.808525] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.814816] UBI: logical eraseblock size:    126976 bytes
<5>[   10.820228] UBI: smallest flash I/O unit:    2048
<7>[   10.824469] usb 2-1.4: skipped 1 descriptor after interface
<5>[   10.824949] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.825017] usb 2-1.4: default language 0x0409
<5>[   10.830975] UBI: data offset:                4096
<7>[   10.831983] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.831990] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.831998] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.832004] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.832010] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.832015] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.832283] usb 2-1.4: usb_probe_device
<7>[   10.832292] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.832337] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.843788] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.844472] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.844579] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.844586] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.169403] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.169564] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.185346] drivers/usb/core/inode.c: creating file '003'
<7>[   11.185426] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.352769] UBI: max. sequence number:       2
<5>[   12.369573] UBI: attached mtd3 to ubi0
<5>[   12.373362] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.379036] UBI: MTD device size:            216 MiB
<5>[   12.384019] UBI: number of good PEBs:        1723
<5>[   12.388734] UBI: number of bad PEBs:         5
<5>[   12.393194] UBI: number of corrupted PEBs:   0
<5>[   12.397648] UBI: max. allowed volumes:       128
<5>[   12.402280] UBI: wear-leveling threshold:    4096
<5>[   12.406995] UBI: number of internal volumes: 1
<5>[   12.411454] UBI: number of user volumes:     1
<5>[   12.415908] UBI: available PEBs:             0
<5>[   12.420361] UBI: total number of reserved PEBs: 1723
<5>[   12.425343] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.431457] UBI: max/mean erase counter: 25/16
<5>[   12.435911] UBI: image sequence number:  1486693232
<5>[   12.440820] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.563020] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.569133] UBIFS: mounted read-only
<5>[   12.572736] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.580769] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.588098] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.593950] UBIFS: default compressor: lzo
<5>[   12.598057] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.976857] UBIFS: un-mount UBI device 0, volume 0
<5>[   34.019629] UBI: mtd3 is detached from ubi0
<6>[   34.032628] usbcore: registered new interface driver usbserial
<6>[   34.038480] usbserial: USB Serial Driver core
<6>[   34.048479] USB Serial support registered for pl2303
<6>[   34.053560] usbcore: registered new interface driver pl2303
<6>[   34.059147] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.070976] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.084633] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.091034] Disabling lock debugging due to kernel taint
<5>[   34.117431] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.117437] NTFSJ support included
<5>[   34.117439] exFAT support included
<5>[   34.117441] Hfs+J support included
<5>[   34.117443] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.144680] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.149136] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.422394] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.431747] udev: starting version 140
<6>[   34.438575] pfe_module_init
<6>[   34.441458] pfe_platform_probe
<6>[   34.445558] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.451391] pfe_probe
<6>[   34.453668] PFE Driver version:
<6>[   34.453670] pfe_ctrl_10_00_4
<6>[   34.453672] built with pfe sources version: pfe_10_00_3
<6>[   34.464944] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.474541] pfe_hw_init
<6>[   34.476992] CLASS version: 20
<6>[   34.479965] TMU version: 1011231
<6>[   34.483203] BMU1 version: 21
<6>[   34.486090] BMU2 version: 21
<6>[   34.488976] EMAC1 network cfg: 80000
<6>[   34.492562] EMAC2 network cfg: 80000
<6>[   34.496145] EMAC3 network cfg: 80000
<6>[   34.499728] EGPI1 version: 50
<6>[   34.502705] EGPI2 version: 50
<6>[   34.505678] EGPI3 version: 50
<6>[   34.508652] HGPI version: 50
<6>[   34.511542] GPT version: 0
<6>[   34.514254] HIF version: 10
<6>[   34.517052] HIF NOPCY version: 10
<6>[   34.520374] UTIL version: 20
<6>[   34.523264] bmu_init(1) done
<6>[   34.526152] bmu_init(2) done
<6>[   34.535495] class_init() done
<6>[   34.538473] tmu_init: mem init
<6>[   34.541542] tmu_init: lmem init
<6>[   34.544734] tmu_init() done
<6>[   34.547533] util_init() done
<6>[   34.550421] gpi_init(1) done
<6>[   34.553315] gpi_init(2) done
<6>[   34.556203] gpi_init(3) done
<6>[   34.559091] gpi_init(hif) done
<6>[   34.562155] bmu_enable(1) done
<6>[   34.565216] bmu_enable(2) done
<6>[   34.568277] pfe_hif_lib_init
<6>[   34.571338] pfe_hif_init
<6>[   34.573878] pfe_hif_alloc_descr
<6>[   34.577125] pfe_hif_init_buffers
<6>[   34.580492] pfe_firmware_init
<6>[   34.743038] pfe_load_elf
<3>[   34.745591] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.777088] PFE binary version: pfe_10_00_3
<6>[   34.781301] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.787758] pfe_load_elf
<6>[   34.791683] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.797008] pfe_load_elf
<6>[   34.801343] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.806882] pfe_ctrl_init
<6>[   34.827634] pfe_ctrl_init finished
<6>[   34.827639] pfe_ctrl_timer
<6>[   34.833791] pfe_eth_init
<6>[   34.845154] Comcerto MDIO Bus: probed
<6>[   34.850104] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.858583] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.865456] pfe_vwd_init
<6>[   34.868097] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.873101] pfe_vwd_driver_init: start
<4>[   34.876864] pfe_vwd_up: start
<6>[   34.879898] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.886989] pfe_vwd_driver_init: end
<6>[   34.890582] pfe_pcap_init
<6>[   34.931198] eth0: pfe_eth_open
<6>[   34.934420] hif_process_client_req: register client_id 0
<6>[   34.939754] pfe_hif_client_register
<6>[   34.943338] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.951667] eth0: pfe_gemac_init
<6>[   34.971634] eth0: pfe_eth_close
<6>[   35.010499] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.019923] hif_process_client_req: unregister client_id 0
<6>[   35.025429] pfe_hif_client_unregister
<6>[   35.029631] eth1: pfe_eth_open
<6>[   35.032832] hif_process_client_req: register client_id 1
<6>[   35.038159] pfe_hif_client_register
<6>[   35.041676] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   35.049966] eth1: pfe_gemac_init
<6>[   35.053972] eth1: pfe_eth_close
<6>[   35.090524] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.099944] hif_process_client_req: unregister client_id 1
<6>[   35.105450] pfe_hif_client_unregister
<6>[   35.814914] kjournald starting.  Commit interval 5 seconds
<6>[   35.820444] EXT3-fs (sda1): using internal journal
<6>[   35.825266] EXT3-fs (sda1): recovery complete
<6>[   35.836466] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   36.243121] kjournald starting.  Commit interval 5 seconds
<6>[   36.248653] EXT3-fs (sda1): using internal journal
<6>[   36.253481] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   37.044649] kjournald starting.  Commit interval 5 seconds
<6>[   37.050179] EXT3-fs (sdb1): using internal journal
<6>[   37.055001] EXT3-fs (sdb1): recovery complete
<6>[   37.066180] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   37.475883] md: md9 stopped.
<6>[   37.481361] md: bind<sdb1>
<6>[   37.484400] md: bind<sda1>
<6>[   37.490134] bio: create slab <bio-1> at 1
<6>[   37.494435] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   37.500004] created bitmap (1 pages) for device md9
<6>[   37.505093] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   37.525336] md9: detected capacity change from 0 to 542769152
<6>[   38.585127]  md9: unknown partition table
<6>[   38.887658] kjournald starting.  Commit interval 5 seconds
<6>[   38.918267] EXT3-fs (md9): using internal journal
<6>[   38.923008] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   39.234949] md: md13 stopped.
<6>[   39.243800] md: bind<sdb4>
<6>[   39.246818] md: bind<sda4>
<6>[   39.252712] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   39.258377] created bitmap (1 pages) for device md13
<6>[   39.263591] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   39.305483] md13: detected capacity change from 0 to 469893120
<4>[   58.768669] set stripe cache size 1024
<4>[   58.773254] STRIPE_CACHE_SIZE is 1024
<6>[   59.810967] md: bind<sda2>
<6>[   59.822965] md: bind<sdb2>
<6>[   59.828814] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   59.834507] created bitmap (1 pages) for device md256
<6>[   59.839779] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   59.867731] md256: detected capacity change from 0 to 542834688
<6>[   59.953651]  md256: unknown partition table
<6>[   60.022162] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   60.726490] md: bind<sda5>
<6>[   60.729440] md: bind<sdb5>
<6>[   60.735273] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   60.740989] created bitmap (1 pages) for device md322
<6>[   60.746307] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   60.770681] md322: detected capacity change from 0 to 7408779264
<6>[   60.844125]  md322: unknown partition table
<6>[   60.959782] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   61.233885]  md13: unknown partition table
<6>[   61.477427] md: md1 stopped.
<6>[   61.492574] md: bind<sdb3>
<6>[   61.495561] md: bind<sda3>
<6>[   61.501453] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   61.506860] md1: detected capacity change from 0 to 5990981238784
<6>[   61.577465]  md1: unknown partition table
<7>[   72.909032] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749675
<7>[   72.909138] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749671
<7>[   72.909182] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749670
<7>[   72.909223] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749669
<7>[   72.909276] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749668
<6>[   72.909310] EXT4-fs (dm-0): 5 orphan inodes deleted
<6>[   72.961818] EXT4-fs (dm-0): recovery complete
<6>[   72.967562] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   93.677539] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:11 across:301105148k 
<6>[   97.577921] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   98.622024] [S30mountall] start
<5>[   99.054473] UBI: attaching mtd3 to ubi0
<5>[   99.058327] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   99.064640] UBI: logical eraseblock size:    126976 bytes
<5>[   99.070137] UBI: smallest flash I/O unit:    2048
<5>[   99.074916] UBI: VID header offset:          2048 (aligned 2048)
<5>[   99.080949] UBI: data offset:                4096
<5>[  100.566154] UBI: max. sequence number:       2
<5>[  100.583057] UBI: attached mtd3 to ubi0
<5>[  100.586823] UBI: MTD device name:            "boot1_rootfs2"
<5>[  100.592514] UBI: MTD device size:            216 MiB
<5>[  100.597491] UBI: number of good PEBs:        1723
<5>[  100.602212] UBI: number of bad PEBs:         5
<5>[  100.606667] UBI: number of corrupted PEBs:   0
<5>[  100.611126] UBI: max. allowed volumes:       128
<5>[  100.615754] UBI: wear-leveling threshold:    4096
<5>[  100.620469] UBI: number of internal volumes: 1
<5>[  100.624927] UBI: number of user volumes:     1
<5>[  100.629380] UBI: available PEBs:             0
<5>[  100.633838] UBI: total number of reserved PEBs: 1723
<5>[  100.638814] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  100.644927] UBI: max/mean erase counter: 25/16
<5>[  100.649381] UBI: image sequence number:  1486693232
<5>[  100.654285] UBI: background thread "ubi_bgt0d" started, PID 1669
<5>[  100.774916] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  100.781053] UBIFS: mounted read-only
<5>[  100.784640] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  100.792676] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  100.800006] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  100.805858] UBIFS: default compressor: lzo
<5>[  100.809964] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  122.897710] UBIFS: un-mount UBI device 0, volume 0
<5>[  122.956666] UBI: mtd3 is detached from ubi0
<5>[  123.267738] UBI: attaching mtd3 to ubi0
<5>[  123.271788] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  123.278075] UBI: logical eraseblock size:    126976 bytes
<5>[  123.283505] UBI: smallest flash I/O unit:    2048
<5>[  123.288221] UBI: VID header offset:          2048 (aligned 2048)
<5>[  123.294249] UBI: data offset:                4096
<5>[  124.778026] UBI: max. sequence number:       2
<5>[  124.794912] UBI: attached mtd3 to ubi0
<5>[  124.798678] UBI: MTD device name:            "boot1_rootfs2"
<5>[  124.804367] UBI: MTD device size:            216 MiB
<5>[  124.809344] UBI: number of good PEBs:        1723
<5>[  124.814064] UBI: number of bad PEBs:         5
<5>[  124.818519] UBI: number of corrupted PEBs:   0
<5>[  124.822977] UBI: max. allowed volumes:       128
<5>[  124.827605] UBI: wear-leveling threshold:    4096
<5>[  124.832324] UBI: number of internal volumes: 1
<5>[  124.836778] UBI: number of user volumes:     1
<5>[  124.841236] UBI: available PEBs:             0
<5>[  124.845690] UBI: total number of reserved PEBs: 1723
<5>[  124.850670] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  124.856778] UBI: max/mean erase counter: 25/16
<5>[  124.861237] UBI: image sequence number:  1486693232
<5>[  124.866138] UBI: background thread "ubi_bgt0d" started, PID 1804
<5>[  124.996330] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  125.002465] UBIFS: mounted read-only
<5>[  125.006051] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  125.014094] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  125.021432] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  125.027279] UBIFS: default compressor: lzo
<5>[  125.031391] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  125.111156] UBIFS: un-mount UBI device 0, volume 0
<5>[  125.160458] UBI: mtd3 is detached from ubi0
<6>[  125.392865] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  140.926004] UBI: attaching mtd6 to ubi2
<5>[  140.929857] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  140.936173] UBI: logical eraseblock size:    126976 bytes
<5>[  140.941693] UBI: smallest flash I/O unit:    2048
<5>[  140.946504] UBI: VID header offset:          2048 (aligned 2048)
<5>[  140.952750] UBI: data offset:                4096
<5>[  141.286847] UBI: max. sequence number:       432
<5>[  141.363152] UBI: attached mtd6 to ubi2
<5>[  141.366916] UBI: MTD device name:            "config"
<5>[  141.372027] UBI: MTD device size:            15 MiB
<5>[  141.376921] UBI: number of good PEBs:        120
<5>[  141.381578] UBI: number of bad PEBs:         0
<5>[  141.386033] UBI: number of corrupted PEBs:   0
<5>[  141.390500] UBI: max. allowed volumes:       128
<5>[  141.395132] UBI: wear-leveling threshold:    4096
<5>[  141.401458] UBI: number of internal volumes: 1
<5>[  141.406137] UBI: number of user volumes:     1
<5>[  141.410630] UBI: available PEBs:             0
<5>[  141.415086] UBI: total number of reserved PEBs: 120
<5>[  141.419978] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  141.426026] UBI: max/mean erase counter: 5/4
<5>[  141.430308] UBI: image sequence number:  1872325126
<5>[  141.435233] UBI: background thread "ubi_bgt2d" started, PID 2241
<5>[  141.702449] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  141.709086] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  141.716741] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  141.724109] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  141.729958] UBIFS: default compressor: lzo
<5>[  141.734074] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  142.380626] UBIFS: un-mount UBI device 2, volume 0
<5>[  142.477584] UBI: mtd6 is detached from ubi2
<4>[  142.853843] [S30mountall] end
<4>[  142.857632] [S31init_hardware] start
<6>[  143.067603] sysinfo: Module loaded.
<6>[  143.726804] fnotify: Load file notify kernel module.
<6>[  145.048835] usbcore: registered new interface driver snd-usb-audio
<6>[  145.118848] usbcore: registered new interface driver snd-usb-caiaq
<6>[  145.244310] Linux video capture interface: v2.00
<6>[  145.302975] usbcore: registered new interface driver uvcvideo
<6>[  145.308744] USB Video Class driver (1.1.1)
<6>[  145.582440] NET: Registered protocol family 10
<4>[  148.547467] [S31init_hardware] end
<4>[  148.551589] [S32init_mac_addr] start
<6>[  149.197612] eth0: pfe_eth_open
<6>[  149.200840] hif_process_client_req: register client_id 1
<6>[  149.206166] pfe_hif_client_register
<6>[  149.209665] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  149.217972] eth0: pfe_gemac_init
<6>[  149.221786] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  149.825615] eth1: pfe_eth_open
<6>[  149.828815] hif_process_client_req: register client_id 0
<6>[  149.834160] pfe_hif_client_register
<6>[  149.837672] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  149.845970] eth1: pfe_gemac_init
<6>[  149.849777] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  152.115749] [S32init_mac_addr] end
<4>[  152.119710] [S33sysinit] start
<6>[  152.220730] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  152.226144] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  163.380485] eth0: no IPv6 routers present
<5>[  173.142558] UBI: attaching mtd6 to ubi2
<5>[  173.146411] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  173.152711] UBI: logical eraseblock size:    126976 bytes
<5>[  173.158123] UBI: smallest flash I/O unit:    2048
<5>[  173.162845] UBI: VID header offset:          2048 (aligned 2048)
<5>[  173.168866] UBI: data offset:                4096
<5>[  173.276606] UBI: max. sequence number:       433
<5>[  173.291905] UBI: attached mtd6 to ubi2
<5>[  173.295669] UBI: MTD device name:            "config"
<5>[  173.300752] UBI: MTD device size:            15 MiB
<5>[  173.305642] UBI: number of good PEBs:        120
<5>[  173.310269] UBI: number of bad PEBs:         0
<5>[  173.314730] UBI: number of corrupted PEBs:   0
<5>[  173.319184] UBI: max. allowed volumes:       128
<5>[  173.323816] UBI: wear-leveling threshold:    4096
<5>[  173.328531] UBI: number of internal volumes: 1
<5>[  173.332990] UBI: number of user volumes:     1
<5>[  173.337444] UBI: available PEBs:             0
<5>[  173.341907] UBI: total number of reserved PEBs: 120
<5>[  173.346796] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  173.352822] UBI: max/mean erase counter: 5/4
<5>[  173.357101] UBI: image sequence number:  1872325126
<5>[  173.362006] UBI: background thread "ubi_bgt2d" started, PID 2897
<5>[  173.486407] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  173.492450] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  173.500043] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  173.507378] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  173.513230] UBIFS: default compressor: lzo
<5>[  173.517338] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  173.537801] UBIFS: un-mount UBI device 2, volume 0
<4>[  247.602230] [S33sysinit] end
<4>[  247.605713] [S34shutdown_check] start
<4>[  247.925890] [S34shutdown_check] end
<4>[  247.930172] [S35init_disk] start
<5>[  248.231977] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  248.238006] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  248.245614] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  248.252951] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  248.258799] UBIFS: default compressor: lzo
<5>[  248.262914] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  248.596871] UBIFS: un-mount UBI device 2, volume 0
<5>[  248.650010] UBI: mtd6 is detached from ubi2
<4>[  250.177514] [S35init_disk] end
<4>[  250.181348] [S40init_network] start
<4>[  250.194884] [S40init_network] end
<4>[  250.198800] [S42hostname] start
<4>[  250.653414] [S42hostname] end
<4>[  250.656987] [S45network] start
<5>[  260.698993] Bridge firewalling registered
<6>[  261.247625] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  261.254827] bonding: MII link monitoring set to 100 ms
<6>[  269.048501] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  277.939078] [S45network] end
<4>[  277.942584] [S46iSCSItrgt] start
<4>[  283.437042] [S46iSCSItrgt] end
<4>[  283.440712] [S46iscsiinit] start
<6>[  283.468220] Loading iSCSI transport class v2.0-870.
<5>[  283.510241] iscsi: registered transport (tcp)
<4>[  284.861215] [S46iscsiinit] end
<4>[  284.864835] [S55urandom] start
<4>[  284.895759] [S55urandom] end
<4>[  284.899200] [S56mariadb] start
<4>[  291.474232] [S56mariadb] end
<4>[  291.477707] [S56start_service] start
<4>[  291.569773] [S56start_service] end
<4>[  291.574083] [S57init_qpkg] start
<6>[  352.220728] PHY: comcerto-0:06 - Link is Down
<6>[  354.220737] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[  423.299897] [S57init_qpkg] end
<4>[  423.303556] [S57ldap] start
<4>[  423.345306] [S57ldap] end
<4>[  423.348469] [S58dbus] start
<4>[  425.609834] [S58dbus] end
<4>[  425.613082] [S58nsswitch] start
<4>[  425.804037] [S58nsswitch] end
<4>[  425.807595] [S58printer] start
<4>[  425.859923] [S58printer] end
<4>[  430.867290] [S59Qthttpd] start
<4>[  446.716184] [S59Qthttpd] end
<4>[  446.722825] [S62cupsd] start
<4>[  447.999236] [S62cupsd] end
<4>[  448.004257] [S62ntpd] start
<4>[  448.088325] [S62ntpd] end
<4>[  448.091534] [S62smb] start
<4>[  449.607388] ==== memory usage ====
<4>[  449.633200] MemTotal:         490756 kB
<4>[  449.637102] MemFree:           65428 kB
<4>[  449.641083] Buffers:           21564 kB
<4>[  449.644958] Cached:           277948 kB
<4>[  449.648824] SwapCached:          200 kB
<4>[  449.652726] Active:           129248 kB
<4>[  449.656599] Inactive:         242160 kB
<4>[  449.660526] Active(anon):      57224 kB
<4>[  449.664407] Inactive(anon):    70564 kB
<4>[  449.668280] Active(file):      72024 kB
<4>[  449.672170] Inactive(file):   171596 kB
<4>[  449.676047] Unevictable:        2012 kB
<4>[  449.680597] Mlocked:            2012 kB
<4>[  449.684480] SwapTotal:      24542452 kB
<4>[  449.688373] SwapFree:       24542124 kB
<4>[  449.703535] Dirty:               324 kB
<4>[  449.707446] Writeback:             0 kB
<4>[  449.711386] AnonPages:         73716 kB
<4>[  449.715288] Mapped:            19332 kB
<4>[  449.719182] Shmem:             55756 kB
<4>[  449.723089] Slab:              35524 kB
<4>[  449.726958] SReclaimable:      23148 kB
<4>[  449.730918] SUnreclaim:        12376 kB
<4>[  449.737078] KernelStack:        1904 kB
<4>[  449.741019] PageTables:         1784 kB
<4>[  449.744902] NFS_Unstable:          0 kB
<4>[  449.748800] Bounce:                0 kB
<4>[  449.752882] WritebackTmp:          0 kB
<4>[  449.756764] CommitLimit:    24787828 kB
<4>[  449.760681] Committed_AS:    1221436 kB
<4>[  449.764546] VmallocTotal:    1302528 kB
<4>[  449.768409] VmallocUsed:       61368 kB
<4>[  449.772322] VmallocChunk:    1212348 kB
<4>[  449.793244] Node 0, zone      DMA
<4>[  449.796602]   pages free     10995
<4>[  449.800030]         min      366
<4>[  449.803360]         low      457
<4>[  449.806626]         high     549
<4>[  449.809954]         scanned  0
<4>[  449.814278]         spanned  11264
<4>[  449.817728]         present  11154
<4>[  449.821206]     nr_free_pages 10995
<4>[  449.824722]     nr_inactive_anon 0
<4>[  449.828148]     nr_active_anon 0
<4>[  449.831417]     nr_inactive_file 0
<4>[  449.834852]     nr_active_file 0
<4>[  449.838154]     nr_unevictable 0
<4>[  449.842946]     nr_mlock     0
<4>[  449.846046]     nr_anon_pages 0
<4>[  449.849228]     nr_mapped    0
<4>[  449.852345]     nr_file_pages 0
<4>[  449.855527]     nr_dirty     0
<4>[  449.858602]     nr_writeback 0
<4>[  449.861698]     nr_slab_reclaimable 0
<4>[  449.865414]     nr_slab_unreclaimable 0
<4>[  449.869272]     nr_page_table_pages 0
<4>[  449.872972]     nr_kernel_stack 0
<4>[  449.876312]     nr_unstable  0
<4>[  449.879384]     nr_bounce    0
<4>[  449.882488]     nr_vmscan_write 0
<4>[  449.885847]     nr_vmscan_immediate_reclaim 0
<4>[  449.890242]     nr_writeback_temp 0
<4>[  449.893806]     nr_isolated_anon 0
<4>[  449.897252]     nr_isolated_file 0
<4>[  449.900706]     nr_shmem     0
<4>[  449.903788]     nr_dirtied   0
<4>[  449.906863]     nr_written   0
<4>[  449.909951]     nr_anon_transparent_hugepages 0
<4>[  449.914524]         protection: (0, 443, 443)
<4>[  449.918903]   pagesets
<4>[  449.921291]     cpu: 0
<4>[  449.923670]               count: 1
<4>[  449.927089]               high:  6
<4>[  449.930546]               batch: 1
<4>[  449.933980]   vm stats threshold: 4
<4>[  449.937487]     cpu: 1
<4>[  449.939861]               count: 0
<4>[  449.943298]               high:  6
<4>[  449.946721]               batch: 1
<4>[  449.950140]   vm stats threshold: 4
<4>[  449.953681]   all_unreclaimable: 0
<4>[  449.957117]   start_pfn:         0
<4>[  449.960570]   inactive_ratio:    1
<4>[  449.964004] Node 0, zone   Normal
<4>[  449.967354]   pages free     5364
<4>[  449.970940]         min      3729
<4>[  449.974290]         low      4661
<4>[  449.977633]         high     5593
<4>[  449.980999]         scanned  0
<4>[  449.984082]         spanned  119808
<4>[  449.987598]         present  113518
<4>[  449.991128]     nr_free_pages 5364
<4>[  449.994561]     nr_inactive_anon 17641
<4>[  449.998342]     nr_active_anon 14280
<4>[  450.001979]     nr_inactive_file 42899
<4>[  450.005757]     nr_active_file 18006
<4>[  450.009362]     nr_unevictable 503
<4>[  450.012808]     nr_mlock     503
<4>[  450.016062]     nr_anon_pages 18410
<4>[  450.019574]     nr_mapped    4833
<4>[  450.022928]     nr_file_pages 74928
<4>[  450.026443]     nr_dirty     81
<4>[  450.029607]     nr_writeback 0
<4>[  450.032697]     nr_slab_reclaimable 5787
<4>[  450.036646]     nr_slab_unreclaimable 3094
<4>[  450.040780]     nr_page_table_pages 446
<4>[  450.044643]     nr_kernel_stack 238
<4>[  450.048153]     nr_unstable  0
<4>[  450.051240]     nr_bounce    0
<4>[  450.054314]     nr_vmscan_write 82
<4>[  450.057739]     nr_vmscan_immediate_reclaim 0
<4>[  450.062131]     nr_writeback_temp 0
<4>[  450.065639]     nr_isolated_anon 0
<4>[  450.069069]     nr_isolated_file 0
<4>[  450.072507]     nr_shmem     13939
<4>[  450.075933]     nr_dirtied   239779
<4>[  450.079441]     nr_written   237435
<4>[  450.082964]     nr_anon_transparent_hugepages 0
<4>[  450.087522]         protection: (0, 0, 0)
<4>[  450.091567]   pagesets
<4>[  450.093943]     cpu: 0
<4>[  450.096323]               count: 93
<4>[  450.099832]               high:  186
<4>[  450.103449]               batch: 31
<4>[  450.106961]   vm stats threshold: 12
<4>[  450.110569]     cpu: 1
<4>[  450.112945]               count: 90
<4>[  450.116451]               high:  186
<4>[  450.120045]               batch: 31
<4>[  450.123567]   vm stats threshold: 12
<4>[  450.127163]   all_unreclaimable: 0
<4>[  450.130596]   start_pfn:         11264
<4>[  450.134371]   inactive_ratio:    1
<4>[  450.154234] Filename				Type		Size	Used	Priority
<4>[  450.158896] /dev/md256                              partition	530108	328	-1
<4>[  450.166314] /dev/md322                              partition	7235132	0	-2
<4>[  450.173384] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  450.195226]               total         used         free       shared      buffers
<4>[  450.195233]   Mem:       490756       424684        66072            0        21572
<4>[  450.195237]  Swap:     24542452          328     24542124
<4>[  450.195240] Total:     25033208       425012     24608196
<4>[  450.237808] ==== end ====
<4>[  473.062686] [S62smb] end
<4>[  473.065797] [S64MediaService] start
<4>[  473.616942] [S64MediaService] end
<4>[  473.621244] [S65thttpd] start
<4>[  481.505787] [S65thttpd] end
<4>[  481.509112] [S66ImRd] start
<4>[  481.513414] [S66ImRd] end
<4>[  481.516786] [S66wfm_thttpd] start
<4>[  484.504567] [S66wfm_thttpd] end
<4>[  484.508241] [S67ftp] start
<4>[  484.679633] [S67ftp] end
<4>[  484.683031] [S70crond] start
<4>[  484.687325] [S70crond] end
<4>[  484.690860] [S72logo] start
<4>[  484.695230] [S72logo] end
<4>[  484.698517] [S73ntpclient] start
<4>[  484.710275] [S73ntpclient] end
<4>[  484.714915] [S75stunnel] start
<4>[  484.719444] [S75stunnel] end
<4>[  484.737898] [S77recycled] start
<4>[  485.902030] [S77recycled] end
<4>[  485.906718] [S78qraid1] start
<4>[  485.918577] [S78qraid1] end
<4>[  485.932689] [S83ups] start
<4>[  485.944708] [S83ups] end
<4>[  485.947979] [S85login] start
<4>[  486.001467] [S85login] end
<4>[  486.004784] [S89bonjour] start
<4>[  486.009342] [S89bonjour] end
<4>[  486.061431] [S89wsd] start
<4>[  486.065475] [S89wsd] end
<6>[  488.301800] Bluetooth: Core ver 2.16
<6>[  488.305452] NET: Registered protocol family 31
<6>[  488.309916] Bluetooth: HCI device and connection manager initialized
<6>[  488.316319] Bluetooth: HCI socket layer initialized
<6>[  488.321221] Bluetooth: L2CAP socket layer initialized
<6>[  488.326301] Bluetooth: SCO socket layer initialized
<6>[  488.411599] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  488.417297] usbcore: registered new interface driver btusb
<6>[  488.490047] Bluetooth: RFCOMM TTY layer initialized
<6>[  488.495046] Bluetooth: RFCOMM socket layer initialized
<6>[  488.500248] Bluetooth: RFCOMM ver 1.11
<4>[  499.284049] [S90twonkymedia] start
<4>[  499.288873] [S90twonkymedia] end
<4>[  499.292940] [S92lunportman] start
<4>[  499.297711] [S92lunportman] end
<4>[  499.301723] [S95snmp] start
<4>[  499.305850] [S95snmp] end
<4>[  499.309055] [S97upnpd] start
<4>[  499.321499] [S97upnpd] end
<4>[  499.324831] [S98init_nas] start
<5>[  507.370630] UBI: attaching mtd6 to ubi2
<5>[  507.374504] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  507.380819] UBI: logical eraseblock size:    126976 bytes
<5>[  507.386238] UBI: smallest flash I/O unit:    2048
<5>[  507.390971] UBI: VID header offset:          2048 (aligned 2048)
<5>[  507.397005] UBI: data offset:                4096
<5>[  507.508724] UBI: max. sequence number:       435
<5>[  507.524000] UBI: attached mtd6 to ubi2
<5>[  507.527767] UBI: MTD device name:            "config"
<5>[  507.532860] UBI: MTD device size:            15 MiB
<5>[  507.537751] UBI: number of good PEBs:        120
<5>[  507.542387] UBI: number of bad PEBs:         0
<5>[  507.546841] UBI: number of corrupted PEBs:   0
<5>[  507.551302] UBI: max. allowed volumes:       128
<5>[  507.555930] UBI: wear-leveling threshold:    4096
<5>[  507.560651] UBI: number of internal volumes: 1
<5>[  507.565105] UBI: number of user volumes:     1
<5>[  507.569559] UBI: available PEBs:             0
<5>[  507.574019] UBI: total number of reserved PEBs: 120
<5>[  507.578907] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  507.584949] UBI: max/mean erase counter: 5/4
<5>[  507.589231] UBI: image sequence number:  1872325126
<5>[  507.594137] UBI: background thread "ubi_bgt2d" started, PID 12270
<5>[  507.718997] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  507.725040] UBIFS: mounted read-only
<5>[  507.728627] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  507.736241] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  507.743580] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  507.749428] UBIFS: default compressor: lzo
<5>[  507.753547] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  507.768218] UBIFS: un-mount UBI device 2, volume 0
<5>[  507.830221] UBI: mtd6 is detached from ubi2
<4>[  509.042550] rule type=2, num=0
<4>[  513.175608] [S98init_nas] end
<4>[  513.179348] [S99atalk] start
<4>[  513.194384] [S99atalk] end
<4>[  513.204369] [S99cloudinstall_report_complete_daemon] start
<4>[  513.224234] [S99cloudinstall_report_complete_daemon] end
<4>[  513.259367] [S99init_iTune] start
<4>[  513.281708] [S99init_iTune] end
<4>[  513.285683] [S99mysqld] start
<4>[  513.302312] [S99mysqld] end
<4>[  513.305901] [S99nfs] start
<4>[  513.357626] [S99nfs] end
<4>[  513.380041] [S99porter] start
<4>[  513.395692] [S99porter] end
<4>[  513.399091] [S99qanalytic] start
<4>[  513.451933] [S99qanalytic] end
<4>[  513.455655] [S99qcloud] start
<4>[  513.459910] [S99qcloud] end
<4>[  513.540692] [S99qsyncman] start
<4>[  513.545208] [S99qsyncman] end
<4>[  513.548906] [S99sdmd.sh] start
<4>[  513.613660] [S99sdmd.sh] end
<4>[  513.617283] [S99sync_action.sh] start
<4>[  513.685245] [S99sync_action.sh] end
<4>[  513.742812] [S99z_antivirus] start
<4>[  513.771025] [S99z_antivirus] end
<4>[  529.071783] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  529.079673] NFSD: starting 90-second grace period
<4>[  623.228461] ====== 2020-03-13 11:27:38 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  638.491122] UBI: attaching mtd6 to ubi2
<5>[  638.494981] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  638.501323] UBI: logical eraseblock size:    126976 bytes
<5>[  638.506765] UBI: smallest flash I/O unit:    2048
<5>[  638.511530] UBI: VID header offset:          2048 (aligned 2048)
<5>[  638.517598] UBI: data offset:                4096
<5>[  638.625720] UBI: max. sequence number:       435
<5>[  638.641049] UBI: attached mtd6 to ubi2
<5>[  638.644819] UBI: MTD device name:            "config"
<5>[  638.649924] UBI: MTD device size:            15 MiB
<5>[  638.654816] UBI: number of good PEBs:        120
<5>[  638.659457] UBI: number of bad PEBs:         0
<5>[  638.663913] UBI: number of corrupted PEBs:   0
<5>[  638.668394] UBI: max. allowed volumes:       128
<5>[  638.673028] UBI: wear-leveling threshold:    4096
<5>[  638.677756] UBI: number of internal volumes: 1
<5>[  638.682216] UBI: number of user volumes:     1
<5>[  638.686670] UBI: available PEBs:             0
<5>[  638.691135] UBI: total number of reserved PEBs: 120
<5>[  638.696029] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  638.702063] UBI: max/mean erase counter: 5/4
<5>[  638.706348] UBI: image sequence number:  1872325126
<5>[  638.711285] UBI: background thread "ubi_bgt2d" started, PID 17743
<5>[  638.835773] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  638.841832] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  638.849442] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  638.856776] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  638.862643] UBIFS: default compressor: lzo
<5>[  638.866752] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  639.089300] UBIFS: un-mount UBI device 2, volume 0
<5>[  639.166460] UBI: mtd6 is detached from ubi2
<6>[ 2565.753766] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[ 2658.277748] PHY: comcerto-0:06 - Link is Down
<6>[ 2660.277799] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[ 2693.927091] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[ 2966.287730] PHY: comcerto-0:06 - Link is Down
<6>[ 2969.287734] PHY: comcerto-0:06 - Link is Up - 1000/Full
[Diagnostic] Fri Mar 13 13:26:47 CET 2020, 505.02
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000180] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060216] Mount-cache hash table entries: 512
<6>[    0.060712] Initializing cgroup subsys cpuacct
<6>[    0.060742] Initializing cgroup subsys devices
<6>[    0.060775] CPU: Testing write buffer coherency: ok
<6>[    0.060941] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060966] Calibrating local timer... 299.86MHz.
<4>[    0.120063]  Creating cpu1_hotplug_thread....
<4>[    0.120151]  cpu1_hotplug_thread Created
<6>[    0.120166] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121575] CPU1: Booted secondary processor
<6>[    0.180038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180090] Brought up 2 CPUs
<6>[    0.180103] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180835] devtmpfs: initialized
<6>[    0.182253] xor: measuring software checksum speed
<6>[    0.229991]    arm4regs  :  2128.800 MB/sec
<6>[    0.279962]    8regs     :  1437.600 MB/sec
<6>[    0.329938]    32regs    :  1409.200 MB/sec
<6>[    0.329946] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330125] NET: Registered protocol family 16
<6>[    0.330595] L310 cache controller enabled
<6>[    0.330607] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330686] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330691] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330705] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330713] ARMv7 AUX CTRL(1): 0x41
<6>[    0.331224] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331232] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331247] Power Management Mode Support For C2000: 
<6>[    0.331558] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347208] PCIe0: Link Up Success 
<6>[    0.347214] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347220] comcerto_pcie_rc_int_init
<6>[    0.347260] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338111] PCIe1: Link Up Failed 
<7>[    4.338231] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338292] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338307] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338426] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338525] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338536] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338548] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349968] bio: create slab <bio-0> at 0
<4>[    4.519619] raid6: int32x1     25 MB/s
<4>[    4.688061] raid6: int32x2     48 MB/s
<4>[    4.858554] raid6: int32x4     82 MB/s
<4>[    5.027845] raid6: int32x8    112 MB/s
<4>[    5.027851] raid6: using algorithm int32x8 (112 MB/s)
<6>[    5.028024] vgaarb: loaded
<5>[    5.028321] SCSI subsystem initialized
<7>[    5.028455] libata version 3.00 loaded.
<6>[    5.028641] usbcore: registered new interface driver usbfs
<6>[    5.028716] usbcore: registered new interface driver hub
<6>[    5.028807] usbcore: registered new device driver usb
<6>[    5.029039] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029476] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.029861] Switching to clocksource timer2
<5>[    5.030076] FS-Cache: Loaded
<6>[    5.030204] CacheFiles: Loaded
<6>[    5.031099] NET: Registered protocol family 2
<6>[    5.031296] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.031918] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032100] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032264] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032271] TCP reno registered
<6>[    5.032279] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032310] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032564] NET: Registered protocol family 1
<6>[    5.032845] RPC: Registered named UNIX socket transport module.
<6>[    5.032853] RPC: Registered udp transport module.
<6>[    5.032858] RPC: Registered tcp transport module.
<6>[    5.032863] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.032886] PCI: CLS 32 bytes, default 32
<6>[    6.072077] membuf_init: created membuf device(253, 0)
<6>[    6.072382] audit: initializing netlink socket (disabled)
<5>[    6.072406] type=2000 audit(6.070:1): initialized
<5>[    6.073395] VFS: Disk quotas dquot_6.5.2
<4>[    6.073539] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.074175] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074452] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.075126] fuse init (API version 7.17)
<6>[    6.075329] msgmni has been set to 932
<6>[    6.077025] async_tx: api initialized (async)
<6>[    6.077139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.077149] io scheduler noop registered
<6>[    6.077154] io scheduler deadline registered
<6>[    6.077217] io scheduler cfq registered (default)
<6>[    6.077522] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077880] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.384546] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.035129] console [ttyS0] enabled
<6>[    7.144508] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.241250] brd: module loaded
<6>[    7.330330] loop: module loaded
<6>[    7.334852] nbd: registered device at major 43
<6>[    7.344596] SCSI Media Changer driver v0.25 
<7>[    7.348981] ahci 0000:00:00.0: version 3.0
<4>[    7.349000] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.354758] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.361788] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.367324] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.375452] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.384517] scsi0 : ahci
<6>[    7.387428] scsi1 : ahci
<6>[    7.390149] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.397482] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.404948] SATA Serdes: 48Mhz ref clk
<6>[    7.409194] Serdes2: Lane OK Passed
<4>[    7.412711] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.417396] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.425174] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.433767] scsi2 : ahci_platform
<6>[    7.437306] scsi3 : ahci_platform
<6>[    7.440793] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.448735] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.457589] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.466954] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.474859] Fixed MDIO Bus: probed
<6>[    7.478322] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.682507] Core Release: 2.81a
<4>[    7.685658] Setting default values for core params
<6>[    7.799904] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.805360] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.890238] Using Buffer DMA mode
<4>[    7.893563] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.899410] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.905002] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.909403] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.914211] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.914226] drivers/usb/core/inode.c: creating file '001'
<6>[    7.914253] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.921353] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.926741] Init: Port Power? op_state=1
<4>[    7.930681] Init: Power Port (0)
<7>[    7.933948] usb usb1: default language 0x0409
<7>[    7.933967] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.933973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.940792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.948034] usb usb1: Product: DWC OTG Controller
<6>[    7.949913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.958963] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.964305] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.968693] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.975517] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.983101] usb usb1: usb_probe_device
<7>[    7.983110] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.983134] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.983225] hub 1-0:1.0: usb_probe_interface
<7>[    7.983232] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.983238] hub 1-0:1.0: USB hub found
<6>[    7.983447] ata1.00: configured for UDMA/133
<6>[    7.991309] hub 1-0:1.0: 1 port detected
<7>[    7.995242] hub 1-0:1.0: standalone hub
<7>[    7.995247] hub 1-0:1.0: ganged power switching
<7>[    7.995253] hub 1-0:1.0: individual port over-current protection
<7>[    7.995259] hub 1-0:1.0: Single TT
<7>[    7.995265] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.995272] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.995285] hub 1-0:1.0: local power source is good
<7>[    7.995292] hub 1-0:1.0: enabling power on all ports
<7>[    7.995460] drivers/usb/core/inode.c: creating file '001'
<7>[    7.995593] Module dwc_common_port init
<6>[    7.995726] mousedev: PS/2 mouse device common for all mice
<5>[    7.995768] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    7.995781] ata1.00: set queue depth = 31
<4>[    7.995959] Check proc_name[ahci].
<5>[    8.017056] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.017064] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.017071] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.017260] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.017269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.017333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.049640] i2c /dev entries driver
<4>[    8.053251] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.061133] comcerto_wdt: support registered
<6>[    8.065518] md: linear personality registered for level -1
<6>[    8.071072] md: raid0 personality registered for level 0
<6>[    8.076425] md: raid1 personality registered for level 1
<6>[    8.081789] md: raid10 personality registered for level 10
<6>[    8.087312] md: raid6 personality registered for level 6
<6>[    8.092651] md: raid5 personality registered for level 5
<6>[    8.097976] md: raid4 personality registered for level 4
<4>[    8.099908] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.099912] 
<7>[    8.099943] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.111776] md: multipath personality registered for level -4
<6>[    8.117912] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.126499] dm_crypt using the OCF for crypto acceleration.
<6>[    8.132399] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.132695]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.142020] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.148567] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.155209] device-mapper: multipath service-time: version 0.2.0 loaded
<5>[    8.163837] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.168574] ALSA device list:
<6>[    8.171570]   No soundcards found.
<6>[    8.175615] TCP cubic registered
<6>[    8.178855] NET: Registered protocol family 17
<6>[    8.183353] NET: Registered protocol family 15
<6>[    8.187808] Initializing NETLINK_KEY socket
<6>[    8.192021] NET: Registered protocol family 5
<6>[    8.196477] lib80211: common routines for IEEE802.11 drivers
<7>[    8.202165] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.202172] Registering the dns_resolver key type
<6>[    8.206933] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.214645] Clocks: disabled unused pll2
<6>[    8.218577] Clocks: disabled unused uart
<6>[    8.222517] Clocks: disabled unused gemtx
<6>[    8.226536] Clocks: disabled unused ipsec_spacc
<6>[    8.231083] Clocks: disabled unused dpi_cie
<6>[    8.235276] Clocks: disabled unused dpi_decomp
<6>[    8.239731] Clocks: disabled unused ntgref
<6>[    8.243844] Clocks: disabled unused pcie1
<6>[    8.247863] Clocks: disabled unused usb1
<6>[    8.251801] Clocks: disabled unused ext_phy0
<6>[    8.256081] Clocks: disabled unused ext_phy1
<6>[    8.260365] Clocks: disabled unused ext_phy2
<6>[    8.264645] Clocks: disabled unused tpi
<6>[    8.268489] Clocks: disabled unused csys
<6>[    8.272426] Clocks: disabled unused tsuntg
<6>[    8.276531] Clocks: disabled unused sata_occ
<6>[    8.280818] Clocks: disabled unused pcie_occ
<6>[    8.285097] Clocks: disabled unused sgmii_occ
<7>[    8.289925] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.289948] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.289952] 
<7>[    8.298430] hub 1-0:1.0: over-current change on port 1
<7>[    8.399933] hub 1-0:1.0: enabling power on all ports
<4>[    8.490506] Registering CPUFreq(comcerto)
<4>[    8.494810] Please be patient, while OpenWrt loads ...
<6>[    8.589922] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.596747] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.603567] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.611466] ata2.00: configured for UDMA/133
<5>[    8.616122] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.624260] ata2.00: set queue depth = 31
<4>[    8.628472] Check proc_name[ahci].
<5>[    8.632110] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.632207] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.645295] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.650776] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.655584] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.655656] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.713804]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.719221] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.741402] Freeing init memory: 13476K
<6>[    9.253500] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.260249] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.520182] RTC_TIME:Fri Mar 13 13:18:33 2020  0.000000 seconds
<6>[    9.549952] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.554603] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.560572] Creating 2 MTD partitions on "spi0.0":
<5>[    9.565384] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.571151] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.581473] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.588559] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.593751] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.602391] Using default values for hw ecc
<4>[    9.610013] Bad block table not found for chip 0
<4>[    9.618013] Bad block table not found for chip 0
<6>[    9.622647] Scanning device for bad blocks
<4>[    9.627791] Bad eraseblock 18 at 0x000000240000
<4>[    9.635280] Bad eraseblock 72 at 0x000000900000
<4>[    9.654965] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.661282] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.692163] Bad eraseblock 863 at 0x000006be0000
<4>[    9.717814] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.737570] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.885489] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.895008] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.901325] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.907784] Creating 5 MTD partitions on "comcertonand":
<5>[    9.913122] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.919422] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.925805] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.931989] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.938346] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.951317] usbcore: registered new interface driver usbhid
<6>[    9.956907] usbhid: USB HID core driver
<6>[    9.966419] usbcore: registered new interface driver usblp
<6>[    9.978977] ## xhci_plat_probe
<6>[    9.982083] ### comcerto_start_xhci
<6>[    9.985592] USB3.0 clock selected: internal
<6>[    9.993038] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.997947] drivers/usb/core/inode.c: creating file '002'
<6>[    9.997969] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.005190] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.010566] usb usb2: default language 0x0409
<7>[   10.010585] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.010592] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.017400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.024658] usb usb2: Product: xHCI Host Controller
<6>[   10.029548] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.034966] usb usb2: SerialNumber: xhci-hcd
<7>[   10.039505] usb usb2: usb_probe_device
<7>[   10.039514] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.039526] xHCI xhci_add_endpoint called for root hub
<7>[   10.039533] xHCI xhci_check_bandwidth called for root hub
<7>[   10.039553] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.039642] hub 2-0:1.0: usb_probe_interface
<7>[   10.039649] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.039656] hub 2-0:1.0: USB hub found
<6>[   10.043451] hub 2-0:1.0: 1 port detected
<7>[   10.047385] hub 2-0:1.0: standalone hub
<7>[   10.047390] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.047396] hub 2-0:1.0: individual port over-current protection
<7>[   10.047402] hub 2-0:1.0: Single TT
<7>[   10.047408] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.047415] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.047429] hub 2-0:1.0: local power source is good
<7>[   10.047436] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.047592] drivers/usb/core/inode.c: creating file '001'
<6>[   10.047660] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.052589] drivers/usb/core/inode.c: creating file '003'
<6>[   10.052603] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.059699] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.059715] usb usb3: default language 0x0409
<7>[   10.059735] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.059742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.066567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.073822] usb usb3: Product: xHCI Host Controller
<6>[   10.078712] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.084130] usb usb3: SerialNumber: xhci-hcd
<7>[   10.088640] usb usb3: usb_probe_device
<7>[   10.088649] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.088657] xHCI xhci_add_endpoint called for root hub
<7>[   10.088663] xHCI xhci_check_bandwidth called for root hub
<7>[   10.088682] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.088769] hub 3-0:1.0: usb_probe_interface
<7>[   10.088775] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.088781] hub 3-0:1.0: USB hub found
<6>[   10.092563] hub 3-0:1.0: 1 port detected
<7>[   10.096497] hub 3-0:1.0: standalone hub
<7>[   10.096502] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.096507] hub 3-0:1.0: individual port over-current protection
<7>[   10.096515] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.096522] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.096534] hub 3-0:1.0: local power source is good
<7>[   10.096541] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.096682] drivers/usb/core/inode.c: creating file '001'
<6>[   10.104078] Initializing USB Mass Storage driver...
<6>[   10.109079] usbcore: registered new interface driver usb-storage
<6>[   10.115125] USB Mass Storage support registered.
<7>[   10.139939] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.189980] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.239959] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.239994] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.359946] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.382418] usb 2-1: default language 0x0409
<7>[   10.382989] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.382999] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.389729] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.396913] usb 2-1: Product: USB2.0 Hub
<6>[   10.400858] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.405656] usb 2-1: usb_probe_device
<7>[   10.405667] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.411724] usb 2-1: Successful Endpoint Configure command
<7>[   10.411969] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.412117] hub 2-1:1.0: usb_probe_interface
<7>[   10.412127] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.412135] hub 2-1:1.0: USB hub found
<6>[   10.416189] hub 2-1:1.0: 4 ports detected
<7>[   10.420267] hub 2-1:1.0: standalone hub
<7>[   10.420275] hub 2-1:1.0: individual port power switching
<7>[   10.420281] hub 2-1:1.0: individual port over-current protection
<7>[   10.444122] usb 2-1: Successful Endpoint Configure command
<7>[   10.444524] hub 2-1:1.0: TT per port
<7>[   10.444532] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.444539] hub 2-1:1.0: Port indicators are supported
<7>[   10.444545] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.444917] usb 2-1: Successful Endpoint Configure command
<7>[   10.445098] hub 2-1:1.0: local power source is good
<7>[   10.445108] hub 2-1:1.0: enabling power on all ports
<7>[   10.446242] drivers/usb/core/inode.c: creating file '002'
<7>[   10.446346] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.446370] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.501951] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.508337] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.542076] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.550094] flashcache: flashcache-1.0-dummy initialized
<6>[   10.560087] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.581890] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.582106] usb 3-1: default language 0x0409
<7>[   10.582644] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.582653] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.589379] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.596580] usb 3-1: Product: USB3.0 Hub
<6>[   10.600533] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.605344] usb 3-1: usb_probe_device
<7>[   10.605355] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.619694] usb 3-1: Successful Endpoint Configure command
<7>[   10.619882] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.620301] hub 3-1:1.0: usb_probe_interface
<7>[   10.620310] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.620317] hub 3-1:1.0: USB hub found
<6>[   10.624353] hub 3-1:1.0: 4 ports detected
<7>[   10.628379] hub 3-1:1.0: standalone hub
<7>[   10.628385] hub 3-1:1.0: individual port power switching
<7>[   10.628391] hub 3-1:1.0: individual port over-current protection
<7>[   10.628398] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.628405] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.628592] usb 3-1: Successful Endpoint Configure command
<7>[   10.628736] hub 3-1:1.0: local power source is good
<7>[   10.628844] hub 3-1:1.0: enabling power on all ports
<7>[   10.629570] drivers/usb/core/inode.c: creating file '002'
<7>[   10.639948] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.640119] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.719152] UBI: attaching mtd3 to ubi0
<6>[   10.720551] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.729650] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.735939] UBI: logical eraseblock size:    126976 bytes
<5>[   10.741356] UBI: smallest flash I/O unit:    2048
<7>[   10.744027] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.744588] usb 2-1.4: default language 0x0409
<5>[   10.746073] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.751766] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.751773] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.751780] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.751787] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.751792] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.751798] usb 2-1.4: SerialNumber: 3B1524X23300  
<5>[   10.783928] UBI: data offset:                4096
<7>[   10.789035] usb 2-1.4: usb_probe_device
<7>[   10.789047] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.789111] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.827689] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.828383] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.828500] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.828508] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.156066] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.156231] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.171997] drivers/usb/core/inode.c: creating file '003'
<7>[   11.172076] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.264895] UBI: max. sequence number:       2
<5>[   12.281710] UBI: attached mtd3 to ubi0
<5>[   12.285470] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.291167] UBI: MTD device size:            216 MiB
<5>[   12.296144] UBI: number of good PEBs:        1723
<5>[   12.300867] UBI: number of bad PEBs:         5
<5>[   12.305321] UBI: number of corrupted PEBs:   0
<5>[   12.309775] UBI: max. allowed volumes:       128
<5>[   12.314408] UBI: wear-leveling threshold:    4096
<5>[   12.319123] UBI: number of internal volumes: 1
<5>[   12.323582] UBI: number of user volumes:     1
<5>[   12.328037] UBI: available PEBs:             0
<5>[   12.332496] UBI: total number of reserved PEBs: 1723
<5>[   12.337472] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.343586] UBI: max/mean erase counter: 25/16
<5>[   12.348040] UBI: image sequence number:  1486693232
<5>[   12.352946] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.475062] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.481191] UBIFS: mounted read-only
<5>[   12.484777] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.492813] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.500150] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.505998] UBIFS: default compressor: lzo
<5>[   12.510111] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.940448] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.979034] UBI: mtd3 is detached from ubi0
<6>[   33.992008] usbcore: registered new interface driver usbserial
<6>[   33.997860] usbserial: USB Serial Driver core
<6>[   34.007767] USB Serial support registered for pl2303
<6>[   34.012857] usbcore: registered new interface driver pl2303
<6>[   34.018443] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.030381] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.044138] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.050545] Disabling lock debugging due to kernel taint
<5>[   34.076993] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.076999] NTFSJ support included
<5>[   34.077001] exFAT support included
<5>[   34.077003] Hfs+J support included
<5>[   34.077005] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.104238] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.108693] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.383306] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.392665] udev: starting version 140
<6>[   34.399409] pfe_module_init
<6>[   34.402298] pfe_platform_probe
<6>[   34.406395] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.412221] pfe_probe
<6>[   34.414500] PFE Driver version:
<6>[   34.414502] pfe_ctrl_10_00_4
<6>[   34.414504] built with pfe sources version: pfe_10_00_3
<6>[   34.425774] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.435371] pfe_hw_init
<6>[   34.437822] CLASS version: 20
<6>[   34.440800] TMU version: 1011231
<6>[   34.444035] BMU1 version: 21
<6>[   34.446921] BMU2 version: 21
<6>[   34.449808] EMAC1 network cfg: 80000
<6>[   34.453394] EMAC2 network cfg: 80000
<6>[   34.456977] EMAC3 network cfg: 80000
<6>[   34.460563] EGPI1 version: 50
<6>[   34.463538] EGPI2 version: 50
<6>[   34.466511] EGPI3 version: 50
<6>[   34.469485] HGPI version: 50
<6>[   34.472375] GPT version: 0
<6>[   34.475088] HIF version: 10
<6>[   34.477887] HIF NOPCY version: 10
<6>[   34.481212] UTIL version: 20
<6>[   34.484099] bmu_init(1) done
<6>[   34.486986] bmu_init(2) done
<6>[   34.496337] class_init() done
<6>[   34.499315] tmu_init: mem init
<6>[   34.502381] tmu_init: lmem init
<6>[   34.505573] tmu_init() done
<6>[   34.508372] util_init() done
<6>[   34.511266] gpi_init(1) done
<6>[   34.514154] gpi_init(2) done
<6>[   34.517042] gpi_init(3) done
<6>[   34.519937] gpi_init(hif) done
<6>[   34.522998] bmu_enable(1) done
<6>[   34.526059] bmu_enable(2) done
<6>[   34.529119] pfe_hif_lib_init
<6>[   34.532181] pfe_hif_init
<6>[   34.534720] pfe_hif_alloc_descr
<6>[   34.537968] pfe_hif_init_buffers
<6>[   34.541333] pfe_firmware_init
<6>[   34.703953] pfe_load_elf
<3>[   34.706507] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.737990] PFE binary version: pfe_10_00_3
<6>[   34.742203] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.748661] pfe_load_elf
<6>[   34.752582] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.757907] pfe_load_elf
<6>[   34.762236] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.767775] pfe_ctrl_init
<6>[   34.788524] pfe_ctrl_init finished
<6>[   34.788529] pfe_ctrl_timer
<6>[   34.794666] pfe_eth_init
<6>[   34.805982] Comcerto MDIO Bus: probed
<6>[   34.811030] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.819474] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.826327] pfe_vwd_init
<6>[   34.829073] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.834085] pfe_vwd_driver_init: start
<4>[   34.837850] pfe_vwd_up: start
<6>[   34.840887] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.847961] pfe_vwd_driver_init: end
<6>[   34.851557] pfe_pcap_init
<6>[   34.892910] eth0: pfe_eth_open
<6>[   34.896143] hif_process_client_req: register client_id 0
<6>[   34.901493] pfe_hif_client_register
<6>[   34.905020] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.913327] eth0: pfe_gemac_init
<6>[   34.919042] eth0: pfe_eth_close
<6>[   34.959907] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.969331] hif_process_client_req: unregister client_id 0
<6>[   34.974838] pfe_hif_client_unregister
<6>[   34.978941] eth1: pfe_eth_open
<6>[   34.982140] hif_process_client_req: register client_id 1
<6>[   34.987466] pfe_hif_client_register
<6>[   34.990976] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.999266] eth1: pfe_gemac_init
<6>[   35.003146] eth1: pfe_eth_close
<6>[   35.039904] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.049324] hif_process_client_req: unregister client_id 1
<6>[   35.054829] pfe_hif_client_unregister
<6>[   35.876961] kjournald starting.  Commit interval 5 seconds
<6>[   35.877243] EXT3-fs (sda1): using internal journal
<6>[   35.877249] EXT3-fs (sda1): recovery complete
<6>[   35.877400] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   36.292112] kjournald starting.  Commit interval 5 seconds
<6>[   36.297642] EXT3-fs (sda1): using internal journal
<6>[   36.302468] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   37.120977] kjournald starting.  Commit interval 5 seconds
<6>[   37.126506] EXT3-fs (sdb1): using internal journal
<6>[   37.131330] EXT3-fs (sdb1): recovery complete
<6>[   37.151613] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   37.462073] md: md9 stopped.
<6>[   37.467479] md: bind<sdb1>
<6>[   37.470546] md: bind<sda1>
<6>[   37.476283] bio: create slab <bio-1> at 1
<6>[   37.480547] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   37.486115] created bitmap (1 pages) for device md9
<6>[   37.491214] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   37.518180] md9: detected capacity change from 0 to 542769152
<6>[   38.577923]  md9: unknown partition table
<6>[   38.759222] kjournald starting.  Commit interval 5 seconds
<6>[   38.770119] EXT3-fs (md9): using internal journal
<6>[   38.774843] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   39.043980] md: md13 stopped.
<6>[   39.052899] md: bind<sdb4>
<6>[   39.055921] md: bind<sda4>
<6>[   39.061796] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   39.067453] created bitmap (1 pages) for device md13
<6>[   39.072657] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   39.122878] md13: detected capacity change from 0 to 469893120
<4>[   56.476285] set stripe cache size 1024
<4>[   56.480727] STRIPE_CACHE_SIZE is 1024
<6>[   57.411368] md: bind<sda2>
<6>[   57.416897] md: bind<sdb2>
<6>[   57.422745] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   57.428458] created bitmap (1 pages) for device md256
<6>[   57.433774] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   57.467228] md256: detected capacity change from 0 to 542834688
<6>[   57.554723]  md256: unknown partition table
<6>[   57.627212] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   58.031895] md: bind<sda5>
<6>[   58.034852] md: bind<sdb5>
<6>[   58.040793] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   58.046492] created bitmap (1 pages) for device md322
<6>[   58.051834] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   58.077378] md322: detected capacity change from 0 to 7408779264
<6>[   58.139796]  md322: unknown partition table
<6>[   58.210937] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   58.562674]  md13: unknown partition table
<6>[   58.954573] md: md1 stopped.
<6>[   58.969128] md: bind<sdb3>
<6>[   58.972166] md: bind<sda3>
<6>[   58.977990] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   58.983439] md1: detected capacity change from 0 to 5990981238784
<6>[   59.054172]  md1: unknown partition table
<7>[   70.120040] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749675
<7>[   70.120153] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749671
<7>[   70.120197] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749670
<7>[   70.120247] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749669
<7>[   70.120288] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 64749668
<6>[   70.120319] EXT4-fs (dm-0): 5 orphan inodes deleted
<6>[   70.180375] EXT4-fs (dm-0): recovery complete
<6>[   70.186071] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   88.564503] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:12 across:457392124k 
<6>[   92.450623] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   93.498054] [S30mountall] start
<5>[   93.932403] UBI: attaching mtd3 to ubi0
<5>[   93.936255] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   93.942560] UBI: logical eraseblock size:    126976 bytes
<5>[   93.947973] UBI: smallest flash I/O unit:    2048
<5>[   93.952708] UBI: VID header offset:          2048 (aligned 2048)
<5>[   93.958730] UBI: data offset:                4096
<5>[   95.452385] UBI: max. sequence number:       2
<5>[   95.469232] UBI: attached mtd3 to ubi0
<5>[   95.473017] UBI: MTD device name:            "boot1_rootfs2"
<5>[   95.478692] UBI: MTD device size:            216 MiB
<5>[   95.483676] UBI: number of good PEBs:        1723
<5>[   95.488392] UBI: number of bad PEBs:         5
<5>[   95.492851] UBI: number of corrupted PEBs:   0
<5>[   95.497305] UBI: max. allowed volumes:       128
<5>[   95.501937] UBI: wear-leveling threshold:    4096
<5>[   95.506653] UBI: number of internal volumes: 1
<5>[   95.511111] UBI: number of user volumes:     1
<5>[   95.515565] UBI: available PEBs:             0
<5>[   95.520022] UBI: total number of reserved PEBs: 1723
<5>[   95.524998] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   95.531126] UBI: max/mean erase counter: 25/16
<5>[   95.535587] UBI: image sequence number:  1486693232
<5>[   95.540501] UBI: background thread "ubi_bgt0d" started, PID 1656
<5>[   95.670096] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   95.676209] UBIFS: mounted read-only
<5>[   95.679795] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   95.687834] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   95.695169] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   95.701021] UBIFS: default compressor: lzo
<5>[   95.705127] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  117.281892] UBIFS: un-mount UBI device 0, volume 0
<5>[  117.329466] UBI: mtd3 is detached from ubi0
<5>[  117.635641] UBI: attaching mtd3 to ubi0
<5>[  117.639494] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  117.645819] UBI: logical eraseblock size:    126976 bytes
<5>[  117.651242] UBI: smallest flash I/O unit:    2048
<5>[  117.655959] UBI: VID header offset:          2048 (aligned 2048)
<5>[  117.661987] UBI: data offset:                4096
<5>[  119.144501] UBI: max. sequence number:       2
<5>[  119.161366] UBI: attached mtd3 to ubi0
<5>[  119.165130] UBI: MTD device name:            "boot1_rootfs2"
<5>[  119.170818] UBI: MTD device size:            216 MiB
<5>[  119.175795] UBI: number of good PEBs:        1723
<5>[  119.180519] UBI: number of bad PEBs:         5
<5>[  119.184973] UBI: number of corrupted PEBs:   0
<5>[  119.189427] UBI: max. allowed volumes:       128
<5>[  119.194060] UBI: wear-leveling threshold:    4096
<5>[  119.198774] UBI: number of internal volumes: 1
<5>[  119.203232] UBI: number of user volumes:     1
<5>[  119.207686] UBI: available PEBs:             0
<5>[  119.212144] UBI: total number of reserved PEBs: 1723
<5>[  119.217120] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  119.223233] UBI: max/mean erase counter: 25/16
<5>[  119.227688] UBI: image sequence number:  1486693232
<5>[  119.232591] UBI: background thread "ubi_bgt0d" started, PID 1783
<5>[  119.355101] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  119.361241] UBIFS: mounted read-only
<5>[  119.364828] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  119.372860] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  119.380198] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  119.386046] UBIFS: default compressor: lzo
<5>[  119.390158] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  119.462469] UBIFS: un-mount UBI device 0, volume 0
<5>[  119.526044] UBI: mtd3 is detached from ubi0
<6>[  119.714839] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  136.105633] UBI: attaching mtd6 to ubi2
<5>[  136.109503] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  136.115848] UBI: logical eraseblock size:    126976 bytes
<5>[  136.121290] UBI: smallest flash I/O unit:    2048
<5>[  136.126007] UBI: VID header offset:          2048 (aligned 2048)
<5>[  136.132037] UBI: data offset:                4096
<5>[  136.313932] UBI: max. sequence number:       436
<5>[  136.349416] UBI: attached mtd6 to ubi2
<5>[  136.353233] UBI: MTD device name:            "config"
<5>[  136.358307] UBI: MTD device size:            15 MiB
<5>[  136.363217] UBI: number of good PEBs:        120
<5>[  136.367846] UBI: number of bad PEBs:         0
<5>[  136.372308] UBI: number of corrupted PEBs:   0
<5>[  136.376763] UBI: max. allowed volumes:       128
<5>[  136.381399] UBI: wear-leveling threshold:    4096
<5>[  136.386114] UBI: number of internal volumes: 1
<5>[  136.390574] UBI: number of user volumes:     1
<5>[  136.395028] UBI: available PEBs:             0
<5>[  136.399482] UBI: total number of reserved PEBs: 120
<5>[  136.404379] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  136.410408] UBI: max/mean erase counter: 5/4
<5>[  136.414688] UBI: image sequence number:  1872325126
<5>[  136.420239] UBI: background thread "ubi_bgt2d" started, PID 2227
<5>[  136.650312] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  136.656343] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  136.663970] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  136.671311] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  136.677165] UBIFS: default compressor: lzo
<5>[  136.681286] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  137.471492] UBIFS: un-mount UBI device 2, volume 0
<5>[  137.548911] UBI: mtd6 is detached from ubi2
<4>[  137.882283] [S30mountall] end
<4>[  137.885912] [S31init_hardware] start
<6>[  138.103837] sysinfo: Module loaded.
<6>[  138.766038] fnotify: Load file notify kernel module.
<6>[  139.987294] usbcore: registered new interface driver snd-usb-audio
<6>[  139.999760] usbcore: registered new interface driver snd-usb-caiaq
<6>[  140.092360] Linux video capture interface: v2.00
<6>[  140.146114] usbcore: registered new interface driver uvcvideo
<6>[  140.151915] USB Video Class driver (1.1.1)
<6>[  140.481574] NET: Registered protocol family 10
<4>[  143.561252] [S31init_hardware] end
<4>[  143.565227] [S32init_mac_addr] start
<6>[  146.205151] eth0: pfe_eth_open
<6>[  146.208471] hif_process_client_req: register client_id 1
<6>[  146.213833] pfe_hif_client_register
<6>[  146.217398] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  146.225728] eth0: pfe_gemac_init
<6>[  146.229663] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  146.845816] eth1: pfe_eth_open
<6>[  146.849018] hif_process_client_req: register client_id 0
<6>[  146.854359] pfe_hif_client_register
<6>[  146.857892] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  146.866191] eth1: pfe_gemac_init
<6>[  146.870012] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  148.725843] [S32init_mac_addr] end
<4>[  148.729816] [S33sysinit] start
<6>[  149.220107] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  149.225523] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  160.799912] eth0: no IPv6 routers present
<5>[  169.877878] UBI: attaching mtd6 to ubi2
<5>[  169.881760] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  169.888043] UBI: logical eraseblock size:    126976 bytes
<5>[  169.893466] UBI: smallest flash I/O unit:    2048
<5>[  169.898182] UBI: VID header offset:          2048 (aligned 2048)
<5>[  169.904211] UBI: data offset:                4096
<5>[  170.011912] UBI: max. sequence number:       437
<5>[  170.027173] UBI: attached mtd6 to ubi2
<5>[  170.030963] UBI: MTD device name:            "config"
<5>[  170.036030] UBI: MTD device size:            15 MiB
<5>[  170.040930] UBI: number of good PEBs:        120
<5>[  170.045557] UBI: number of bad PEBs:         0
<5>[  170.050018] UBI: number of corrupted PEBs:   0
<5>[  170.054473] UBI: max. allowed volumes:       128
<5>[  170.059101] UBI: wear-leveling threshold:    4096
<5>[  170.063826] UBI: number of internal volumes: 1
<5>[  170.068288] UBI: number of user volumes:     1
<5>[  170.072783] UBI: available PEBs:             0
<5>[  170.077242] UBI: total number of reserved PEBs: 120
<5>[  170.082145] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  170.088167] UBI: max/mean erase counter: 5/4
<5>[  170.092451] UBI: image sequence number:  1872325126
<5>[  170.097353] UBI: background thread "ubi_bgt2d" started, PID 2885
<5>[  170.223228] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  170.229258] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  170.236865] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  170.244203] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  170.250065] UBIFS: default compressor: lzo
<5>[  170.254172] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  170.274504] UBIFS: un-mount UBI device 2, volume 0
<4>[  244.416474] [S33sysinit] end
<4>[  244.419980] [S34shutdown_check] start
<4>[  244.729988] [S34shutdown_check] end
<4>[  244.734285] [S35init_disk] start
<5>[  245.038029] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  245.044077] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  245.051677] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  245.059007] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  245.064867] UBIFS: default compressor: lzo
<5>[  245.068974] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  245.312993] UBIFS: un-mount UBI device 2, volume 0
<5>[  245.369369] UBI: mtd6 is detached from ubi2
<4>[  246.862297] [S35init_disk] end
<4>[  246.866072] [S40init_network] start
<4>[  246.879175] [S40init_network] end
<4>[  246.883269] [S42hostname] start
<4>[  247.341134] [S42hostname] end
<4>[  247.344676] [S45network] start
<5>[  257.377429] Bridge firewalling registered
<6>[  257.926408] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  257.933620] bonding: MII link monitoring set to 100 ms
<6>[  265.695200] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  274.845368] [S45network] end
<4>[  274.848823] [S46iSCSItrgt] start
<4>[  280.509855] [S46iSCSItrgt] end
<4>[  280.513644] [S46iscsiinit] start
<6>[  280.572628] Loading iSCSI transport class v2.0-870.
<5>[  280.602077] iscsi: registered transport (tcp)
<4>[  281.990092] [S46iscsiinit] end
<4>[  281.993729] [S55urandom] start
<4>[  282.026151] [S55urandom] end
<4>[  282.029619] [S56mariadb] start
<4>[  289.547257] [S56mariadb] end
<4>[  289.550791] [S56start_service] start
<4>[  289.655363] [S56start_service] end
<4>[  289.659323] [S57init_qpkg] start
<4>[  421.418139] [S57init_qpkg] end
<4>[  421.421789] [S57ldap] start
<4>[  421.460452] [S57ldap] end
<4>[  421.463616] [S58dbus] start
<4>[  423.688797] [S58dbus] end
<4>[  423.692046] [S58nsswitch] start
<4>[  423.886018] [S58nsswitch] end
<4>[  423.889534] [S58printer] start
<4>[  423.955218] [S58printer] end
<4>[  428.962624] [S59Qthttpd] start
<4>[  444.707886] [S59Qthttpd] end
<4>[  444.712929] [S62cupsd] start
<4>[  446.047871] [S62cupsd] end
<4>[  446.051181] [S62ntpd] start
<4>[  446.133781] [S62ntpd] end
<4>[  446.136937] [S62smb] start
<4>[  447.357970] ==== memory usage ====
<4>[  447.384168] MemTotal:         490756 kB
<4>[  447.388062] MemFree:           68756 kB
<4>[  447.392035] Buffers:           21284 kB
<4>[  447.395902] Cached:           272356 kB
<4>[  447.399765] SwapCached:          144 kB
<4>[  447.403649] Active:           130776 kB
<4>[  447.407525] Inactive:         236900 kB
<4>[  447.411437] Active(anon):      59556 kB
<4>[  447.415318] Inactive(anon):    70384 kB
<4>[  447.419185] Active(file):      71220 kB
<4>[  447.423107] Inactive(file):   166516 kB
<4>[  447.426973] Unevictable:        2012 kB
<4>[  447.430863] Mlocked:            2012 kB
<4>[  447.437322] SwapTotal:      24542452 kB
<4>[  447.441249] SwapFree:       24542092 kB
<4>[  447.445142] Dirty:               312 kB
<4>[  447.449044] Writeback:             0 kB
<4>[  447.453094] AnonPages:         75904 kB
<4>[  447.457064] Mapped:            19384 kB
<4>[  447.460959] Shmem:             55764 kB
<4>[  447.464822] Slab:              35276 kB
<4>[  447.468694] SReclaimable:      23072 kB
<4>[  447.472601] SUnreclaim:        12204 kB
<4>[  447.476481] KernelStack:        2392 kB
<4>[  447.480362] PageTables:         1988 kB
<4>[  447.484226] NFS_Unstable:          0 kB
<4>[  447.488090] Bounce:                0 kB
<4>[  447.491964] WritebackTmp:          0 kB
<4>[  447.495843] CommitLimit:    24787828 kB
<4>[  447.499735] Committed_AS:    1730588 kB
<4>[  447.503649] VmallocTotal:    1302528 kB
<4>[  447.507516] VmallocUsed:       61368 kB
<4>[  447.511428] VmallocChunk:    1212348 kB
<4>[  447.543836] Node 0, zone      DMA
<4>[  447.547199]   pages free     10974
<4>[  447.550659]         min      366
<4>[  447.553916]         low      457
<4>[  447.557171]         high     549
<4>[  447.560434]         scanned  0
<4>[  447.563521]         spanned  11264
<4>[  447.566969]         present  11154
<4>[  447.570438]     nr_free_pages 10974
<4>[  447.573983]     nr_inactive_anon 0
<4>[  447.577422]     nr_active_anon 0
<4>[  447.580754]     nr_inactive_file 0
<4>[  447.584184]     nr_active_file 0
<4>[  447.587437]     nr_unevictable 0
<4>[  447.590703]     nr_mlock     0
<4>[  447.593790]     nr_anon_pages 0
<4>[  447.596985]     nr_mapped    0
<4>[  447.600123]     nr_file_pages 0
<4>[  447.603309]     nr_dirty     0
<4>[  447.606398]     nr_writeback 0
<4>[  447.609484]     nr_slab_reclaimable 0
<4>[  447.613211]     nr_slab_unreclaimable 0
<4>[  447.617075]     nr_page_table_pages 0
<4>[  447.620784]     nr_kernel_stack 0
<4>[  447.624171]     nr_unstable  0
<4>[  447.627272]     nr_bounce    0
<4>[  447.630373]     nr_vmscan_write 0
<4>[  447.633718]     nr_vmscan_immediate_reclaim 0
<4>[  447.638106]     nr_writeback_temp 0
<4>[  447.641637]     nr_isolated_anon 0
<4>[  447.645068]     nr_isolated_file 0
<4>[  447.648509]     nr_shmem     0
<4>[  447.651636]     nr_dirtied   0
<4>[  447.654734]     nr_written   0
<4>[  447.657818]     nr_anon_transparent_hugepages 0
<4>[  447.662389]         protection: (0, 443, 443)
<4>[  447.666773]   pagesets
<4>[  447.669153]     cpu: 0
<4>[  447.671549]               count: 1
<4>[  447.675077]               high:  6
<4>[  447.678554]               batch: 1
<4>[  447.682028]   vm stats threshold: 4
<4>[  447.685551]     cpu: 1
<4>[  447.687935]               count: 0
<4>[  447.691374]               high:  6
<4>[  447.694802]               batch: 1
<4>[  447.698236]   vm stats threshold: 4
<4>[  447.701801]   all_unreclaimable: 0
<4>[  447.705261]   start_pfn:         0
<4>[  447.708696]   inactive_ratio:    1
<4>[  447.712148] Node 0, zone   Normal
<4>[  447.715491]   pages free     6271
<4>[  447.718831]         min      3729
<4>[  447.722201]         low      4661
<4>[  447.725554]         high     5593
<4>[  447.728916]         scanned  0
<4>[  447.732027]         spanned  119808
<4>[  447.735548]         present  113518
<4>[  447.739062]     nr_free_pages 6271
<4>[  447.742500]     nr_inactive_anon 17596
<4>[  447.746276]     nr_active_anon 14785
<4>[  447.749918]     nr_inactive_file 41629
<4>[  447.753717]     nr_active_file 17805
<4>[  447.757339]     nr_unevictable 503
<4>[  447.760786]     nr_mlock     503
<4>[  447.764039]     nr_anon_pages 18881
<4>[  447.767552]     nr_mapped    4865
<4>[  447.772179]     nr_file_pages 73446
<4>[  447.775711]     nr_dirty     78
<4>[  447.778925]     nr_writeback 0
<4>[  447.782059]     nr_slab_reclaimable 5768
<4>[  447.786021]     nr_slab_unreclaimable 3051
<4>[  447.790164]     nr_page_table_pages 516
<4>[  447.794030]     nr_kernel_stack 299
<4>[  447.797543]     nr_unstable  0
<4>[  447.800638]     nr_bounce    0
<4>[  447.803726]     nr_vmscan_write 90
<4>[  447.807182]     nr_vmscan_immediate_reclaim 0
<4>[  447.811599]     nr_writeback_temp 0
<4>[  447.815119]     nr_isolated_anon 0
<4>[  447.818619]     nr_isolated_file 0
<4>[  447.822072]     nr_shmem     13941
<4>[  447.825500]     nr_dirtied   240430
<4>[  447.829025]     nr_written   238152
<4>[  447.832580]     nr_anon_transparent_hugepages 0
<4>[  447.837158]         protection: (0, 0, 0)
<4>[  447.841213]   pagesets
<4>[  447.843595]     cpu: 0
<4>[  447.845981]               count: 140
<4>[  447.849584]               high:  186
<4>[  447.853204]               batch: 31
<4>[  447.856746]   vm stats threshold: 12
<4>[  447.860625]     cpu: 1
<4>[  447.863017]               count: 30
<4>[  447.866534]               high:  186
<4>[  447.870155]               batch: 31
<4>[  447.873671]   vm stats threshold: 12
<4>[  447.877272]   all_unreclaimable: 0
<4>[  447.880725]   start_pfn:         11264
<4>[  447.884535]   inactive_ratio:    1
<4>[  447.902541] Filename				Type		Size	Used	Priority
<4>[  447.907218] /dev/md256                              partition	530108	360	-1
<4>[  447.914242] /dev/md322                              partition	7235132	0	-2
<4>[  447.921256] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  447.939857]               total         used         free       shared      buffers
<4>[  447.939863]   Mem:       490756       423776        66980            0        21284
<4>[  447.939868]  Swap:     24542452          360     24542092
<4>[  447.939871] Total:     25033208       424136     24609072
<4>[  447.992141] ==== end ====
<4>[  471.177019] [S62smb] end
<4>[  471.180292] [S64MediaService] start
<4>[  471.720723] [S64MediaService] end
<4>[  471.724923] [S65thttpd] start
<4>[  479.934045] [S65thttpd] end
<4>[  479.937371] [S66ImRd] start
<4>[  479.941635] [S66ImRd] end
<4>[  479.945018] [S66wfm_thttpd] start
<4>[  483.000593] [S66wfm_thttpd] end
<4>[  483.004270] [S67ftp] start
<4>[  483.171822] [S67ftp] end
<4>[  483.174875] [S70crond] start
<4>[  483.179089] [S70crond] end
<4>[  483.182603] [S72logo] start
<4>[  483.187008] [S72logo] end
<4>[  483.190817] [S73ntpclient] start
<4>[  483.195305] [S73ntpclient] end
<4>[  483.199028] [S75stunnel] start
<4>[  483.218082] [S75stunnel] end
<4>[  483.223774] [S77recycled] start
<4>[  484.264472] [S77recycled] end
<4>[  484.268064] [S78qraid1] start
<4>[  484.277798] [S78qraid1] end
<4>[  484.296637] [S83ups] start
<4>[  484.308520] [S83ups] end
<4>[  484.317841] [S85login] start
<4>[  484.331989] [S85login] end
<4>[  484.335424] [S89bonjour] start
<4>[  484.370049] [S89bonjour] end
<4>[  484.373754] [S89wsd] start
<4>[  484.397489] [S89wsd] end
<6>[  486.147354] Bluetooth: Core ver 2.16
<6>[  486.151043] NET: Registered protocol family 31
<6>[  486.155599] Bluetooth: HCI device and connection manager initialized
<6>[  486.162015] Bluetooth: HCI socket layer initialized
<6>[  486.166916] Bluetooth: L2CAP socket layer initialized
<6>[  486.172258] Bluetooth: SCO socket layer initialized
<6>[  486.233970] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  486.239684] usbcore: registered new interface driver btusb
<6>[  486.342123] Bluetooth: RFCOMM TTY layer initialized
<6>[  486.347044] Bluetooth: RFCOMM socket layer initialized
<6>[  486.352266] Bluetooth: RFCOMM ver 1.11
<4>[  495.177560] [S90twonkymedia] start
<4>[  495.182394] [S90twonkymedia] end
<4>[  495.186327] [S92lunportman] start
<4>[  495.191170] [S92lunportman] end
<4>[  495.195083] [S95snmp] start
<4>[  495.199339] [S95snmp] end
<4>[  495.210665] [S97upnpd] start
<4>[  495.214820] [S97upnpd] end
<4>[  495.226794] [S98init_nas] start
<5>[  501.162870] UBI: attaching mtd6 to ubi2
<5>[  501.166727] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  501.173053] UBI: logical eraseblock size:    126976 bytes
<5>[  501.178470] UBI: smallest flash I/O unit:    2048
<5>[  501.183220] UBI: VID header offset:          2048 (aligned 2048)
<5>[  501.189249] UBI: data offset:                4096
<5>[  501.301198] UBI: max. sequence number:       439
<5>[  501.316471] UBI: attached mtd6 to ubi2
<5>[  501.320296] UBI: MTD device name:            "config"
<5>[  501.325364] UBI: MTD device size:            15 MiB
<5>[  501.330267] UBI: number of good PEBs:        120
<5>[  501.334896] UBI: number of bad PEBs:         0
<5>[  501.339350] UBI: number of corrupted PEBs:   0
<5>[  501.343812] UBI: max. allowed volumes:       128
<5>[  501.348440] UBI: wear-leveling threshold:    4096
<5>[  501.353160] UBI: number of internal volumes: 1
<5>[  501.357615] UBI: number of user volumes:     1
<5>[  501.362072] UBI: available PEBs:             0
<5>[  501.366527] UBI: total number of reserved PEBs: 120
<5>[  501.371434] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  501.377456] UBI: max/mean erase counter: 5/4
<5>[  501.381741] UBI: image sequence number:  1872325126
<5>[  501.386670] UBI: background thread "ubi_bgt2d" started, PID 12493
<5>[  501.507161] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  501.513202] UBIFS: mounted read-only
<5>[  501.516789] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  501.524386] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  501.531721] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  501.537569] UBIFS: default compressor: lzo
<5>[  501.541681] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  501.554601] UBIFS: un-mount UBI device 2, volume 0
<5>[  501.605628] UBI: mtd6 is detached from ubi2
<4>[  503.804185] rule type=2, num=0
<4>[  507.862041] [S98init_nas] end
<4>[  507.865632] [S99atalk] start
<4>[  507.875477] [S99atalk] end
<4>[  507.878963] [S99cloudinstall_report_complete_daemon] start
<4>[  507.914486] [S99cloudinstall_report_complete_daemon] end
<4>[  507.940885] [S99init_iTune] start
<4>[  507.945618] [S99init_iTune] end
<4>[  507.966965] [S99mysqld] start
<4>[  507.978834] [S99mysqld] end
<4>[  508.007277] [S99nfs] start
<4>[  508.028581] [S99nfs] end
<4>[  508.060747] [S99porter] start
<4>[  508.065052] [S99porter] end
<4>[  508.068616] [S99qanalytic] start
<4>[  508.131346] [S99qanalytic] end
<4>[  508.134993] [S99qcloud] start
<4>[  508.139315] [S99qcloud] end
<4>[  508.231450] [S99qsyncman] start
<4>[  508.236145] [S99qsyncman] end
<4>[  508.239784] [S99sdmd.sh] start
<4>[  508.305069] [S99sdmd.sh] end
<4>[  508.357433] [S99sync_action.sh] start
<4>[  508.379610] [S99sync_action.sh] end
<4>[  508.422928] [S99z_antivirus] start
<4>[  508.469236] [S99z_antivirus] end
<4>[  523.659125] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  523.667058] NFSD: starting 90-second grace period
<4>[  620.198927] ====== 2020-03-13 13:28:43 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  633.334114] UBI: attaching mtd6 to ubi2
<5>[  633.337991] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  633.344306] UBI: logical eraseblock size:    126976 bytes
<5>[  633.349730] UBI: smallest flash I/O unit:    2048
<5>[  633.354452] UBI: VID header offset:          2048 (aligned 2048)
<5>[  633.360498] UBI: data offset:                4096
<5>[  633.475474] UBI: max. sequence number:       439
<5>[  633.499967] UBI: attached mtd6 to ubi2
<5>[  633.503757] UBI: MTD device name:            "config"
<5>[  633.508828] UBI: MTD device size:            15 MiB
<5>[  633.513754] UBI: number of good PEBs:        120
<5>[  633.518391] UBI: number of bad PEBs:         0
<5>[  633.522890] UBI: number of corrupted PEBs:   0
<5>[  633.527350] UBI: max. allowed volumes:       128
<5>[  633.532016] UBI: wear-leveling threshold:    4096
<5>[  633.536738] UBI: number of internal volumes: 1
<5>[  633.541233] UBI: number of user volumes:     1
<5>[  633.545696] UBI: available PEBs:             0
<5>[  633.550171] UBI: total number of reserved PEBs: 120
<5>[  633.555070] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  633.561124] UBI: max/mean erase counter: 5/4
<5>[  633.565412] UBI: image sequence number:  1872325126
<5>[  633.570428] UBI: background thread "ubi_bgt2d" started, PID 18001
<5>[  633.710665] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  633.716716] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  633.724359] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  633.731722] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  633.737572] UBIFS: default compressor: lzo
<5>[  633.741693] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  633.958882] UBIFS: un-mount UBI device 2, volume 0
<5>[  634.005512] UBI: mtd6 is detached from ubi2
<6>[ 1161.552391] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[ 1291.110169] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<4>[ 1679.930512] nfsd: last server has exited, flushing export cache
<6>[ 1734.511497] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[ 1734.608795] eth0: pfe_eth_close
<6>[ 1734.639216] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[ 1734.648638] hif_process_client_req: unregister client_id 1
<6>[ 1734.654146] pfe_hif_client_unregister
<6>[ 1734.719337] eth1: pfe_eth_close
<6>[ 1734.759251] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[ 1734.768680] hif_process_client_req: unregister client_id 0
<6>[ 1734.774205] pfe_hif_client_unregister
<5>[ 1751.668095] UBI: attaching mtd6 to ubi2
<5>[ 1751.671991] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 1751.678275] UBI: logical eraseblock size:    126976 bytes
<5>[ 1751.683701] UBI: smallest flash I/O unit:    2048
<5>[ 1751.688418] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 1751.694441] UBI: data offset:                4096
<5>[ 1751.802404] UBI: max. sequence number:       440
<5>[ 1751.817701] UBI: attached mtd6 to ubi2
<5>[ 1751.821506] UBI: MTD device name:            "config"
<5>[ 1751.826574] UBI: MTD device size:            15 MiB
<5>[ 1751.831477] UBI: number of good PEBs:        120
<5>[ 1751.836106] UBI: number of bad PEBs:         0
<5>[ 1751.840569] UBI: number of corrupted PEBs:   0
<5>[ 1751.845024] UBI: max. allowed volumes:       128
<5>[ 1751.849662] UBI: wear-leveling threshold:    4096
<5>[ 1751.854378] UBI: number of internal volumes: 1
<5>[ 1751.858832] UBI: number of user volumes:     1
<5>[ 1751.863296] UBI: available PEBs:             0
<5>[ 1751.867750] UBI: total number of reserved PEBs: 120
<5>[ 1751.872648] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 1751.878670] UBI: max/mean erase counter: 5/4
<5>[ 1751.882957] UBI: image sequence number:  1872325126
<5>[ 1751.887857] UBI: background thread "ubi_bgt2d" started, PID 2813
<5>[ 1752.008721] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 1752.014781] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 1752.022386] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 1752.029723] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 1752.035571] UBIFS: default compressor: lzo
<5>[ 1752.039684] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 1752.477598] UBIFS: un-mount UBI device 2, volume 0
<5>[ 1752.525331] UBI: mtd6 is detached from ubi2
[Diagnostic] Fri Mar 13 13:59:08 CET 2020, 494.93
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000186] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060028] pid_max: default: 32768 minimum: 301
<6>[    0.060216] Mount-cache hash table entries: 512
<6>[    0.060716] Initializing cgroup subsys cpuacct
<6>[    0.060747] Initializing cgroup subsys devices
<6>[    0.060781] CPU: Testing write buffer coherency: ok
<6>[    0.060940] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060966] Calibrating local timer... 299.86MHz.
<4>[    0.120063]  Creating cpu1_hotplug_thread....
<4>[    0.120152]  cpu1_hotplug_thread Created
<6>[    0.120167] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121564] CPU1: Booted secondary processor
<6>[    0.180038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180089] Brought up 2 CPUs
<6>[    0.180102] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180824] devtmpfs: initialized
<6>[    0.182224] xor: measuring software checksum speed
<6>[    0.229987]    arm4regs  :  2128.800 MB/sec
<6>[    0.279963]    8regs     :  1438.000 MB/sec
<6>[    0.329940]    32regs    :  1409.600 MB/sec
<6>[    0.329947] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330154] NET: Registered protocol family 16
<6>[    0.330649] L310 cache controller enabled
<6>[    0.330661] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330740] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330744] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330758] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330766] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331275] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331283] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331298] Power Management Mode Support For C2000: 
<6>[    0.331609] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347482] PCIe0: Link Up Success 
<6>[    0.347489] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347494] comcerto_pcie_rc_int_init
<6>[    0.347535] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338167] PCIe1: Link Up Failed 
<7>[    4.338302] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338363] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338378] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338498] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338595] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338606] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338618] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349977] bio: create slab <bio-0> at 0
<4>[    4.519722] raid6: int32x1     25 MB/s
<4>[    4.688200] raid6: int32x2     48 MB/s
<4>[    4.858583] raid6: int32x4     82 MB/s
<4>[    5.028223] raid6: int32x8    113 MB/s
<4>[    5.028228] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028418] vgaarb: loaded
<5>[    5.028720] SCSI subsystem initialized
<7>[    5.028854] libata version 3.00 loaded.
<6>[    5.029008] usbcore: registered new interface driver usbfs
<6>[    5.029087] usbcore: registered new interface driver hub
<6>[    5.029171] usbcore: registered new device driver usb
<6>[    5.029394] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029813] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030198] Switching to clocksource timer2
<5>[    5.030425] FS-Cache: Loaded
<6>[    5.030547] CacheFiles: Loaded
<6>[    5.031438] NET: Registered protocol family 2
<6>[    5.031635] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032279] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032460] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032618] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032625] TCP reno registered
<6>[    5.032634] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032663] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032905] NET: Registered protocol family 1
<6>[    5.033195] RPC: Registered named UNIX socket transport module.
<6>[    5.033202] RPC: Registered udp transport module.
<6>[    5.033208] RPC: Registered tcp transport module.
<6>[    5.033213] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033235] PCI: CLS 32 bytes, default 32
<6>[    6.071846] membuf_init: created membuf device(253, 0)
<6>[    6.072135] audit: initializing netlink socket (disabled)
<5>[    6.072158] type=2000 audit(6.070:1): initialized
<5>[    6.073102] VFS: Disk quotas dquot_6.5.2
<4>[    6.073241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073809] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074055] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074713] fuse init (API version 7.17)
<6>[    6.074900] msgmni has been set to 932
<6>[    6.076583] async_tx: api initialized (async)
<6>[    6.076699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076709] io scheduler noop registered
<6>[    6.076714] io scheduler deadline registered
<6>[    6.076780] io scheduler cfq registered (default)
<6>[    6.077083] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.444884] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.095473] console [ttyS0] enabled
<6>[    7.234849] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.331590] brd: module loaded
<6>[    7.420569] loop: module loaded
<6>[    7.425083] nbd: registered device at major 43
<6>[    7.434794] SCSI Media Changer driver v0.25 
<7>[    7.439176] ahci 0000:00:00.0: version 3.0
<4>[    7.439195] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.444953] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.451986] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.457523] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.465651] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.474714] scsi0 : ahci
<6>[    7.477613] scsi1 : ahci
<6>[    7.480339] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.487670] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.495139] SATA Serdes: 48Mhz ref clk
<6>[    7.499384] Serdes2: Lane OK Passed
<4>[    7.502901] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.507585] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.515360] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.523944] scsi2 : ahci_platform
<6>[    7.527492] scsi3 : ahci_platform
<6>[    7.530985] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.538926] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.547787] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.557151] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.565054] Fixed MDIO Bus: probed
<6>[    7.568516] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.772704] Core Release: 2.81a
<4>[    7.775862] Setting default values for core params
<6>[    7.890241] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.895699] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.980453] Using Buffer DMA mode
<4>[    7.983777] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.989623] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.995215] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.999613] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    8.004418] drivers/usb/core/inode.c: creating file 'devices'
<7>[    8.004432] drivers/usb/core/inode.c: creating file '001'
<6>[    8.004445] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    8.011553] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    8.016943] Init: Port Power? op_state=1
<4>[    8.020884] Init: Power Port (0)
<7>[    8.024155] usb usb1: default language 0x0409
<7>[    8.024173] usb usb1: udev 1, busnum 1, minor = 0
<6>[    8.024180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    8.030998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    8.038240] usb usb1: Product: DWC OTG Controller
<6>[    8.040267] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.040896] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.040904] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.041471] ata1.00: configured for UDMA/133
<5>[    8.041842] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.041855] ata1.00: set queue depth = 31
<4>[    8.042038] Check proc_name[ahci].
<5>[    8.042335] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.042658] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.042666] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.042861] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.042869] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.042931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.105868]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.119448] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<5>[    8.120112] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.129405] usb usb1: SerialNumber: dwc_otg.0
<7>[    8.134056] usb usb1: usb_probe_device
<7>[    8.134066] usb usb1: configuration #1 chosen from 1 choice
<7>[    8.134094] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    8.134186] hub 1-0:1.0: usb_probe_interface
<7>[    8.134193] hub 1-0:1.0: usb_probe_interface - got id
<6>[    8.134200] hub 1-0:1.0: USB hub found
<6>[    8.137968] hub 1-0:1.0: 1 port detected
<7>[    8.141915] hub 1-0:1.0: standalone hub
<7>[    8.141921] hub 1-0:1.0: ganged power switching
<7>[    8.141926] hub 1-0:1.0: individual port over-current protection
<7>[    8.141932] hub 1-0:1.0: Single TT
<7>[    8.141938] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    8.141946] hub 1-0:1.0: power on to power good time: 2ms
<7>[    8.141959] hub 1-0:1.0: local power source is good
<7>[    8.141967] hub 1-0:1.0: enabling power on all ports
<7>[    8.142122] drivers/usb/core/inode.c: creating file '001'
<7>[    8.142242] Module dwc_common_port init
<6>[    8.142369] mousedev: PS/2 mouse device common for all mice
<6>[    8.148150] i2c /dev entries driver
<4>[    8.151762] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.159592] comcerto_wdt: support registered
<6>[    8.163917] md: linear personality registered for level -1
<6>[    8.169418] md: raid0 personality registered for level 0
<6>[    8.174754] md: raid1 personality registered for level 1
<6>[    8.180080] md: raid10 personality registered for level 10
<6>[    8.185587] md: raid6 personality registered for level 6
<6>[    8.190918] md: raid5 personality registered for level 5
<6>[    8.196242] md: raid4 personality registered for level 4
<6>[    8.201573] md: multipath personality registered for level -4
<6>[    8.207655] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.216173] dm_crypt using the OCF for crypto acceleration.
<6>[    8.221945] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.227450] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.234007] device-mapper: multipath queue-length: version 0.1.0 loaded
<4>[    8.240250] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.240254] 
<7>[    8.240282] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.249112] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.259636] ALSA device list:
<6>[    8.262626]   No soundcards found.
<6>[    8.266660] TCP cubic registered
<6>[    8.269899] NET: Registered protocol family 17
<6>[    8.274393] NET: Registered protocol family 15
<6>[    8.278849] Initializing NETLINK_KEY socket
<6>[    8.283060] NET: Registered protocol family 5
<6>[    8.287515] lib80211: common routines for IEEE802.11 drivers
<7>[    8.290245] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290258] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290262] 
<7>[    8.290270] hub 1-0:1.0: over-current change on port 1
<7>[    8.301665] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.301672] Registering the dns_resolver key type
<6>[    8.306416] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.314120] Clocks: disabled unused pll2
<6>[    8.318053] Clocks: disabled unused uart
<6>[    8.321994] Clocks: disabled unused gemtx
<6>[    8.326013] Clocks: disabled unused ipsec_spacc
<6>[    8.330559] Clocks: disabled unused dpi_cie
<6>[    8.334752] Clocks: disabled unused dpi_decomp
<6>[    8.339207] Clocks: disabled unused ntgref
<6>[    8.343318] Clocks: disabled unused pcie1
<6>[    8.347337] Clocks: disabled unused usb1
<6>[    8.351273] Clocks: disabled unused ext_phy0
<6>[    8.355553] Clocks: disabled unused ext_phy1
<6>[    8.359832] Clocks: disabled unused ext_phy2
<6>[    8.364116] Clocks: disabled unused tpi
<6>[    8.367959] Clocks: disabled unused csys
<6>[    8.371895] Clocks: disabled unused tsuntg
<6>[    8.376001] Clocks: disabled unused sata_occ
<6>[    8.380284] Clocks: disabled unused pcie_occ
<6>[    8.384564] Clocks: disabled unused sgmii_occ
<7>[    8.400261] hub 1-0:1.0: enabling power on all ports
<4>[    8.581149] Registering CPUFreq(comcerto)
<4>[    8.585443] Please be patient, while OpenWrt loads ...
<6>[    8.640253] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.647071] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.653906] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.661816] ata2.00: configured for UDMA/133
<5>[    8.666477] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.674622] ata2.00: set queue depth = 31
<4>[    8.678843] Check proc_name[ahci].
<5>[    8.682469] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.682582] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.695661] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.701156] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.705964] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.706036] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.759811]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.765249] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.787431] Freeing init memory: 13476K
<6>[    9.301751] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.308485] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.569159] RTC_TIME:Fri Mar 13 13:51:03 2020  0.000000 seconds
<6>[    9.600320] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.604971] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.610918] Creating 2 MTD partitions on "spi0.0":
<5>[    9.615726] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.621466] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.631817] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.638903] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.644093] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.652733] Using default values for hw ecc
<4>[    9.660356] Bad block table not found for chip 0
<4>[    9.668357] Bad block table not found for chip 0
<6>[    9.672991] Scanning device for bad blocks
<4>[    9.678134] Bad eraseblock 18 at 0x000000240000
<4>[    9.685616] Bad eraseblock 72 at 0x000000900000
<4>[    9.705271] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.711592] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.742428] Bad eraseblock 863 at 0x000006be0000
<4>[    9.768046] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.787780] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.935481] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.945088] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.951410] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.957868] Creating 5 MTD partitions on "comcertonand":
<5>[    9.963207] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.969514] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.975891] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.982090] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.988447] 0x00001f000000-0x00001ff00000 : "config"
<6>[   10.001464] usbcore: registered new interface driver usbhid
<6>[   10.007054] usbhid: USB HID core driver
<6>[   10.016586] usbcore: registered new interface driver usblp
<6>[   10.029187] ## xhci_plat_probe
<6>[   10.032294] ### comcerto_start_xhci
<6>[   10.035801] USB3.0 clock selected: internal
<6>[   10.043250] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.048160] drivers/usb/core/inode.c: creating file '002'
<6>[   10.048181] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.055404] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.060780] usb usb2: default language 0x0409
<7>[   10.060798] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.060805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.067613] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.074862] usb usb2: Product: xHCI Host Controller
<6>[   10.079752] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.085169] usb usb2: SerialNumber: xhci-hcd
<7>[   10.089704] usb usb2: usb_probe_device
<7>[   10.089713] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.089724] xHCI xhci_add_endpoint called for root hub
<7>[   10.089731] xHCI xhci_check_bandwidth called for root hub
<7>[   10.089751] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.089839] hub 2-0:1.0: usb_probe_interface
<7>[   10.089846] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.089852] hub 2-0:1.0: USB hub found
<6>[   10.093658] hub 2-0:1.0: 1 port detected
<7>[   10.097592] hub 2-0:1.0: standalone hub
<7>[   10.097597] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.097603] hub 2-0:1.0: individual port over-current protection
<7>[   10.097609] hub 2-0:1.0: Single TT
<7>[   10.097615] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.097622] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.097636] hub 2-0:1.0: local power source is good
<7>[   10.097642] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.097791] drivers/usb/core/inode.c: creating file '001'
<6>[   10.097865] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.102780] drivers/usb/core/inode.c: creating file '003'
<6>[   10.102796] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.109893] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.109905] usb usb3: default language 0x0409
<7>[   10.109922] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.109929] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.116746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.123993] usb usb3: Product: xHCI Host Controller
<6>[   10.128882] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.134299] usb usb3: SerialNumber: xhci-hcd
<7>[   10.138809] usb usb3: usb_probe_device
<7>[   10.138818] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.138827] xHCI xhci_add_endpoint called for root hub
<7>[   10.138833] xHCI xhci_check_bandwidth called for root hub
<7>[   10.138850] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.138938] hub 3-0:1.0: usb_probe_interface
<7>[   10.138945] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.138951] hub 3-0:1.0: USB hub found
<6>[   10.142731] hub 3-0:1.0: 1 port detected
<7>[   10.146664] hub 3-0:1.0: standalone hub
<7>[   10.146669] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.146675] hub 3-0:1.0: individual port over-current protection
<7>[   10.146682] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.146689] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.146702] hub 3-0:1.0: local power source is good
<7>[   10.146709] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.146849] drivers/usb/core/inode.c: creating file '001'
<6>[   10.154323] Initializing USB Mass Storage driver...
<6>[   10.159325] usbcore: registered new interface driver usb-storage
<6>[   10.165372] USB Mass Storage support registered.
<7>[   10.190286] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.240308] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.290802] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.290838] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.410305] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.432545] usb 2-1: default language 0x0409
<7>[   10.433063] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.433074] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.439802] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.446989] usb 2-1: Product: USB2.0 Hub
<6>[   10.450934] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.455741] usb 2-1: usb_probe_device
<7>[   10.455752] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.461919] usb 2-1: Successful Endpoint Configure command
<7>[   10.462145] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.462312] hub 2-1:1.0: usb_probe_interface
<7>[   10.462321] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.462328] hub 2-1:1.0: USB hub found
<6>[   10.466375] hub 2-1:1.0: 4 ports detected
<7>[   10.470444] hub 2-1:1.0: standalone hub
<7>[   10.470454] hub 2-1:1.0: individual port power switching
<7>[   10.470463] hub 2-1:1.0: individual port over-current protection
<7>[   10.493933] usb 2-1: Successful Endpoint Configure command
<7>[   10.494254] hub 2-1:1.0: TT per port
<7>[   10.494262] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.494269] hub 2-1:1.0: Port indicators are supported
<7>[   10.494275] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.494509] usb 2-1: Successful Endpoint Configure command
<7>[   10.494694] hub 2-1:1.0: local power source is good
<7>[   10.494706] hub 2-1:1.0: enabling power on all ports
<7>[   10.495538] drivers/usb/core/inode.c: creating file '002'
<7>[   10.495626] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.495657] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.551134] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.557520] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.591159] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.599274] flashcache: flashcache-1.0-dummy initialized
<6>[   10.610427] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.632216] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.632390] usb 3-1: default language 0x0409
<7>[   10.632922] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.632931] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.639658] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.646846] usb 3-1: Product: USB3.0 Hub
<6>[   10.650797] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.655616] usb 3-1: usb_probe_device
<7>[   10.655627] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.669888] usb 3-1: Successful Endpoint Configure command
<7>[   10.670071] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.670470] hub 3-1:1.0: usb_probe_interface
<7>[   10.670484] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.670491] hub 3-1:1.0: USB hub found
<6>[   10.674530] hub 3-1:1.0: 4 ports detected
<7>[   10.678553] hub 3-1:1.0: standalone hub
<7>[   10.678558] hub 3-1:1.0: individual port power switching
<7>[   10.678564] hub 3-1:1.0: individual port over-current protection
<7>[   10.678572] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.678579] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.678762] usb 3-1: Successful Endpoint Configure command
<7>[   10.678906] hub 3-1:1.0: local power source is good
<7>[   10.679020] hub 3-1:1.0: enabling power on all ports
<7>[   10.679752] drivers/usb/core/inode.c: creating file '002'
<7>[   10.690279] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.690497] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.768494] UBI: attaching mtd3 to ubi0
<6>[   10.770559] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.778992] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.785282] UBI: logical eraseblock size:    126976 bytes
<5>[   10.790701] UBI: smallest flash I/O unit:    2048
<7>[   10.794520] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.795100] usb 2-1.4: default language 0x0409
<5>[   10.795418] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.801444] UBI: data offset:                4096
<7>[   10.801960] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.801966] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.801974] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.801980] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.801986] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.801991] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.838371] usb 2-1.4: usb_probe_device
<7>[   10.838382] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.838446] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.877882] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.878530] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.878657] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.878666] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.205381] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.205548] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.221304] drivers/usb/core/inode.c: creating file '003'
<7>[   11.221389] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.315125] UBI: max. sequence number:       2
<5>[   12.331949] UBI: attached mtd3 to ubi0
<5>[   12.335709] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.341410] UBI: MTD device size:            216 MiB
<5>[   12.346387] UBI: number of good PEBs:        1723
<5>[   12.351111] UBI: number of bad PEBs:         5
<5>[   12.355564] UBI: number of corrupted PEBs:   0
<5>[   12.360018] UBI: max. allowed volumes:       128
<5>[   12.364650] UBI: wear-leveling threshold:    4096
<5>[   12.369365] UBI: number of internal volumes: 1
<5>[   12.373824] UBI: number of user volumes:     1
<5>[   12.378278] UBI: available PEBs:             0
<5>[   12.382737] UBI: total number of reserved PEBs: 1723
<5>[   12.387714] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.393828] UBI: max/mean erase counter: 25/16
<5>[   12.398283] UBI: image sequence number:  1486693232
<5>[   12.403191] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.525269] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.531399] UBIFS: mounted read-only
<5>[   12.534986] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.543022] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.550357] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.556205] UBIFS: default compressor: lzo
<5>[   12.560316] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.946406] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.999306] UBI: mtd3 is detached from ubi0
<6>[   34.012306] usbcore: registered new interface driver usbserial
<6>[   34.018158] usbserial: USB Serial Driver core
<6>[   34.028125] USB Serial support registered for pl2303
<6>[   34.033226] usbcore: registered new interface driver pl2303
<6>[   34.038813] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.050692] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.064365] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.070781] Disabling lock debugging due to kernel taint
<5>[   34.097184] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.097190] NTFSJ support included
<5>[   34.097192] exFAT support included
<5>[   34.097194] Hfs+J support included
<5>[   34.097196] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.124427] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.128884] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.407356] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.416672] udev: starting version 140
<6>[   34.423530] pfe_module_init
<6>[   34.426383] pfe_platform_probe
<6>[   34.430523] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.436336] pfe_probe
<6>[   34.438614] PFE Driver version:
<6>[   34.438616] pfe_ctrl_10_00_4
<6>[   34.438618] built with pfe sources version: pfe_10_00_3
<6>[   34.449908] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.459508] pfe_hw_init
<6>[   34.461964] CLASS version: 20
<6>[   34.464938] TMU version: 1011231
<6>[   34.468173] BMU1 version: 21
<6>[   34.471064] BMU2 version: 21
<6>[   34.473950] EMAC1 network cfg: 80000
<6>[   34.477533] EMAC2 network cfg: 80000
<6>[   34.481119] EMAC3 network cfg: 80000
<6>[   34.484702] EGPI1 version: 50
<6>[   34.487676] EGPI2 version: 50
<6>[   34.490653] EGPI3 version: 50
<6>[   34.493627] HGPI version: 50
<6>[   34.496513] GPT version: 0
<6>[   34.499225] HIF version: 10
<6>[   34.502028] HIF NOPCY version: 10
<6>[   34.505350] UTIL version: 20
<6>[   34.508237] bmu_init(1) done
<6>[   34.511128] bmu_init(2) done
<6>[   34.520473] class_init() done
<6>[   34.523451] tmu_init: mem init
<6>[   34.526511] tmu_init: lmem init
<6>[   34.529704] tmu_init() done
<6>[   34.532508] util_init() done
<6>[   34.535397] gpi_init(1) done
<6>[   34.538285] gpi_init(2) done
<6>[   34.541177] gpi_init(3) done
<6>[   34.544065] gpi_init(hif) done
<6>[   34.547125] bmu_enable(1) done
<6>[   34.550185] bmu_enable(2) done
<6>[   34.553250] pfe_hif_lib_init
<6>[   34.556310] pfe_hif_init
<6>[   34.558849] pfe_hif_alloc_descr
<6>[   34.562104] pfe_hif_init_buffers
<6>[   34.565460] pfe_firmware_init
<6>[   34.728091] pfe_load_elf
<3>[   34.730709] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.762221] PFE binary version: pfe_10_00_3
<6>[   34.766420] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.772888] pfe_load_elf
<6>[   34.776803] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.782139] pfe_load_elf
<6>[   34.786457] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.792010] pfe_ctrl_init
<6>[   34.812774] pfe_ctrl_init finished
<6>[   34.812780] pfe_ctrl_timer
<6>[   34.818899] pfe_eth_init
<6>[   34.830189] Comcerto MDIO Bus: probed
<6>[   34.835237] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.843751] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.850599] pfe_vwd_init
<6>[   34.853243] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.858227] pfe_vwd_driver_init: start
<4>[   34.862002] pfe_vwd_up: start
<6>[   34.865040] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.872127] pfe_vwd_driver_init: end
<6>[   34.875715] pfe_pcap_init
<6>[   34.917217] eth0: pfe_eth_open
<6>[   34.920470] hif_process_client_req: register client_id 0
<6>[   34.925803] pfe_hif_client_register
<6>[   34.929319] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.937627] eth0: pfe_gemac_init
<6>[   34.948233] eth0: pfe_eth_close
<6>[   34.990241] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.999665] hif_process_client_req: unregister client_id 0
<6>[   35.005172] pfe_hif_client_unregister
<6>[   35.009396] eth1: pfe_eth_open
<6>[   35.012620] hif_process_client_req: register client_id 1
<6>[   35.017946] pfe_hif_client_register
<6>[   35.021462] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   35.029764] eth1: pfe_gemac_init
<6>[   35.033824] eth1: pfe_eth_close
<6>[   35.070234] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.079655] hif_process_client_req: unregister client_id 1
<6>[   35.085159] pfe_hif_client_unregister
<6>[   35.518835] kjournald starting.  Commit interval 5 seconds
<6>[   35.524392] EXT3-fs (sda1): using internal journal
<6>[   35.529203] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.946272] kjournald starting.  Commit interval 5 seconds
<6>[   35.951832] EXT3-fs (sda1): using internal journal
<6>[   35.956642] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.389341] kjournald starting.  Commit interval 5 seconds
<6>[   36.394897] EXT3-fs (sdb1): using internal journal
<6>[   36.399707] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.714691] md: md9 stopped.
<6>[   36.720079] md: bind<sdb1>
<6>[   36.723252] md: bind<sda1>
<6>[   36.729001] bio: create slab <bio-1> at 1
<6>[   36.733272] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.738842] created bitmap (1 pages) for device md9
<6>[   36.743928] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.766251] md9: detected capacity change from 0 to 542769152
<6>[   37.825927]  md9: unknown partition table
<6>[   38.052226] kjournald starting.  Commit interval 5 seconds
<6>[   38.060438] EXT3-fs (md9): using internal journal
<6>[   38.065162] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.365085] md: md13 stopped.
<6>[   38.373581] md: bind<sdb4>
<6>[   38.376603] md: bind<sda4>
<6>[   38.382524] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.388178] created bitmap (1 pages) for device md13
<6>[   38.393351] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.440888] md13: detected capacity change from 0 to 469893120
<4>[   57.075018] set stripe cache size 1024
<4>[   57.079330] STRIPE_CACHE_SIZE is 1024
<6>[   58.015819] md: bind<sda2>
<6>[   58.031401] md: bind<sdb2>
<6>[   58.037256] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   58.042974] created bitmap (1 pages) for device md256
<6>[   58.048283] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   58.076143] md256: detected capacity change from 0 to 542834688
<6>[   58.162133]  md256: unknown partition table
<6>[   58.230646] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   58.628603] md: bind<sda5>
<6>[   58.631574] md: bind<sdb5>
<6>[   58.637429] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   58.643149] created bitmap (1 pages) for device md322
<6>[   58.648468] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   58.673127] md322: detected capacity change from 0 to 7408779264
<6>[   58.735514]  md322: unknown partition table
<6>[   58.806667] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   59.165350]  md13: unknown partition table
<6>[   59.559358] md: md1 stopped.
<6>[   59.579204] md: bind<sdb3>
<6>[   59.582356] md: bind<sda3>
<6>[   59.588797] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   59.594248] md1: detected capacity change from 0 to 5990981238784
<6>[   59.684098]  md1: unknown partition table
<6>[   70.195948] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   77.072678] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   80.958120] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   82.002436] [S30mountall] start
<5>[   82.439229] UBI: attaching mtd3 to ubi0
<5>[   82.443111] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   82.449396] UBI: logical eraseblock size:    126976 bytes
<5>[   82.454815] UBI: smallest flash I/O unit:    2048
<5>[   82.459531] UBI: VID header offset:          2048 (aligned 2048)
<5>[   82.465557] UBI: data offset:                4096
<5>[   83.949125] UBI: max. sequence number:       2
<5>[   83.965993] UBI: attached mtd3 to ubi0
<5>[   83.969760] UBI: MTD device name:            "boot1_rootfs2"
<5>[   83.975448] UBI: MTD device size:            216 MiB
<5>[   83.980430] UBI: number of good PEBs:        1723
<5>[   83.985145] UBI: number of bad PEBs:         5
<5>[   83.989599] UBI: number of corrupted PEBs:   0
<5>[   83.994056] UBI: max. allowed volumes:       128
<5>[   83.998684] UBI: wear-leveling threshold:    4096
<5>[   84.003403] UBI: number of internal volumes: 1
<5>[   84.007857] UBI: number of user volumes:     1
<5>[   84.012314] UBI: available PEBs:             0
<5>[   84.016769] UBI: total number of reserved PEBs: 1723
<5>[   84.021749] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   84.027857] UBI: max/mean erase counter: 25/16
<5>[   84.032315] UBI: image sequence number:  1486693232
<5>[   84.037217] UBI: background thread "ubi_bgt0d" started, PID 1607
<5>[   84.159464] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   84.165596] UBIFS: mounted read-only
<5>[   84.169182] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   84.177215] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   84.184553] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   84.190404] UBIFS: default compressor: lzo
<5>[   84.194511] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  106.962322] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.009691] UBI: mtd3 is detached from ubi0
<5>[  107.482878] UBI: attaching mtd3 to ubi0
<5>[  107.486732] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  107.493041] UBI: logical eraseblock size:    126976 bytes
<5>[  107.498454] UBI: smallest flash I/O unit:    2048
<5>[  107.503193] UBI: VID header offset:          2048 (aligned 2048)
<5>[  107.509215] UBI: data offset:                4096
<5>[  108.991002] UBI: max. sequence number:       2
<5>[  109.007861] UBI: attached mtd3 to ubi0
<5>[  109.011651] UBI: MTD device name:            "boot1_rootfs2"
<5>[  109.017326] UBI: MTD device size:            216 MiB
<5>[  109.022315] UBI: number of good PEBs:        1723
<5>[  109.027031] UBI: number of bad PEBs:         5
<5>[  109.031493] UBI: number of corrupted PEBs:   0
<5>[  109.035948] UBI: max. allowed volumes:       128
<5>[  109.040581] UBI: wear-leveling threshold:    4096
<5>[  109.045296] UBI: number of internal volumes: 1
<5>[  109.049751] UBI: number of user volumes:     1
<5>[  109.054208] UBI: available PEBs:             0
<5>[  109.058663] UBI: total number of reserved PEBs: 1723
<5>[  109.063643] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  109.069751] UBI: max/mean erase counter: 25/16
<5>[  109.074209] UBI: image sequence number:  1486693232
<5>[  109.079109] UBI: background thread "ubi_bgt0d" started, PID 1740
<5>[  109.209604] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  109.215736] UBIFS: mounted read-only
<5>[  109.219323] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  109.227356] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  109.234694] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  109.240547] UBIFS: default compressor: lzo
<5>[  109.244652] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  109.304250] UBIFS: un-mount UBI device 0, volume 0
<5>[  109.356302] UBI: mtd3 is detached from ubi0
<6>[  109.528213] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  128.464246] UBI: attaching mtd6 to ubi2
<5>[  128.468103] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  128.474419] UBI: logical eraseblock size:    126976 bytes
<5>[  128.479833] UBI: smallest flash I/O unit:    2048
<5>[  128.484591] UBI: VID header offset:          2048 (aligned 2048)
<5>[  128.490628] UBI: data offset:                4096
<5>[  128.742872] UBI: max. sequence number:       441
<5>[  128.798168] UBI: attached mtd6 to ubi2
<5>[  128.801977] UBI: MTD device name:            "config"
<5>[  128.807462] UBI: MTD device size:            15 MiB
<5>[  128.812375] UBI: number of good PEBs:        120
<5>[  128.817004] UBI: number of bad PEBs:         0
<5>[  128.821757] UBI: number of corrupted PEBs:   0
<5>[  128.829712] UBI: max. allowed volumes:       128
<5>[  128.834413] UBI: wear-leveling threshold:    4096
<5>[  128.839130] UBI: number of internal volumes: 1
<5>[  128.843594] UBI: number of user volumes:     1
<5>[  128.848112] UBI: available PEBs:             0
<5>[  128.852576] UBI: total number of reserved PEBs: 120
<5>[  128.857568] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  128.863928] UBI: max/mean erase counter: 5/4
<5>[  128.868212] UBI: image sequence number:  1872325126
<5>[  128.875973] UBI: background thread "ubi_bgt2d" started, PID 2192
<5>[  129.101513] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  129.107544] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  129.115242] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  129.122666] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  129.128527] UBIFS: default compressor: lzo
<5>[  129.132649] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  129.746663] UBIFS: un-mount UBI device 2, volume 0
<5>[  129.818765] UBI: mtd6 is detached from ubi2
<4>[  130.217098] [S30mountall] end
<4>[  130.220992] [S31init_hardware] start
<6>[  130.425705] sysinfo: Module loaded.
<6>[  130.986363] fnotify: Load file notify kernel module.
<6>[  132.255335] usbcore: registered new interface driver snd-usb-audio
<6>[  132.268160] usbcore: registered new interface driver snd-usb-caiaq
<6>[  132.294200] Linux video capture interface: v2.00
<6>[  132.338177] usbcore: registered new interface driver uvcvideo
<6>[  132.344002] USB Video Class driver (1.1.1)
<6>[  132.588087] NET: Registered protocol family 10
<4>[  135.501536] [S31init_hardware] end
<4>[  135.505516] [S32init_mac_addr] start
<6>[  136.645115] eth0: pfe_eth_open
<6>[  136.648318] hif_process_client_req: register client_id 1
<6>[  136.653657] pfe_hif_client_register
<6>[  136.657192] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  136.665497] eth0: pfe_gemac_init
<6>[  136.669298] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  137.274400] eth1: pfe_eth_open
<6>[  137.277602] hif_process_client_req: register client_id 0
<6>[  137.282948] pfe_hif_client_register
<6>[  137.286460] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  137.294762] eth1: pfe_gemac_init
<6>[  137.298565] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  139.209158] [S32init_mac_addr] end
<4>[  139.213175] [S33sysinit] start
<6>[  139.660440] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  139.665854] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  151.190245] eth0: no IPv6 routers present
<5>[  160.322862] UBI: attaching mtd6 to ubi2
<5>[  160.326714] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  160.333012] UBI: logical eraseblock size:    126976 bytes
<5>[  160.338424] UBI: smallest flash I/O unit:    2048
<5>[  160.343147] UBI: VID header offset:          2048 (aligned 2048)
<5>[  160.349168] UBI: data offset:                4096
<5>[  160.457134] UBI: max. sequence number:       442
<5>[  160.472412] UBI: attached mtd6 to ubi2
<5>[  160.476178] UBI: MTD device name:            "config"
<5>[  160.481263] UBI: MTD device size:            15 MiB
<5>[  160.486152] UBI: number of good PEBs:        120
<5>[  160.490785] UBI: number of bad PEBs:         0
<5>[  160.495240] UBI: number of corrupted PEBs:   0
<5>[  160.499693] UBI: max. allowed volumes:       128
<5>[  160.504326] UBI: wear-leveling threshold:    4096
<5>[  160.509041] UBI: number of internal volumes: 1
<5>[  160.513502] UBI: number of user volumes:     1
<5>[  160.517956] UBI: available PEBs:             0
<5>[  160.522414] UBI: total number of reserved PEBs: 120
<5>[  160.527304] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  160.533329] UBI: max/mean erase counter: 5/4
<5>[  160.537609] UBI: image sequence number:  1872325126
<5>[  160.542516] UBI: background thread "ubi_bgt2d" started, PID 2846
<5>[  160.664253] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  160.670294] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  160.677886] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  160.685221] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  160.691072] UBIFS: default compressor: lzo
<5>[  160.695179] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  160.715506] UBIFS: un-mount UBI device 2, volume 0
<4>[  233.873369] [S33sysinit] end
<4>[  233.876849] [S34shutdown_check] start
<4>[  234.155950] [S34shutdown_check] end
<4>[  234.160312] [S35init_disk] start
<5>[  234.469064] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  234.475106] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  234.482703] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  234.490033] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  234.495885] UBIFS: default compressor: lzo
<5>[  234.499990] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  234.632937] UBIFS: un-mount UBI device 2, volume 0
<5>[  234.706927] UBI: mtd6 is detached from ubi2
<4>[  236.204537] [S35init_disk] end
<4>[  236.208165] [S40init_network] start
<4>[  236.221265] [S40init_network] end
<4>[  236.227646] [S42hostname] start
<4>[  236.683193] [S42hostname] end
<4>[  236.686767] [S45network] start
<5>[  246.791545] Bridge firewalling registered
<6>[  247.336259] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  247.343464] bonding: MII link monitoring set to 100 ms
<6>[  255.081622] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  264.127078] [S45network] end
<4>[  264.130813] [S46iSCSItrgt] start
<4>[  269.649211] [S46iSCSItrgt] end
<4>[  269.653020] [S46iscsiinit] start
<6>[  269.698498] Loading iSCSI transport class v2.0-870.
<5>[  269.737272] iscsi: registered transport (tcp)
<4>[  271.107448] [S46iscsiinit] end
<4>[  271.111150] [S55urandom] start
<4>[  271.143656] [S55urandom] end
<4>[  271.147217] [S56mariadb] start
<4>[  277.630433] [S56mariadb] end
<4>[  277.633932] [S56start_service] start
<4>[  277.730825] [S56start_service] end
<4>[  277.734799] [S57init_qpkg] start
<4>[  407.353900] [S57init_qpkg] end
<4>[  407.357513] [S57ldap] start
<4>[  407.396018] [S57ldap] end
<4>[  407.399182] [S58dbus] start
<4>[  409.642602] [S58dbus] end
<4>[  409.645800] [S58nsswitch] start
<4>[  409.836083] [S58nsswitch] end
<4>[  409.839602] [S58printer] start
<4>[  409.886564] [S58printer] end
<4>[  414.893955] [S59Qthttpd] start
<4>[  430.582095] [S59Qthttpd] end
<4>[  430.587046] [S62cupsd] start
<4>[  431.842623] [S62cupsd] end
<4>[  431.845869] [S62ntpd] start
<4>[  431.932910] [S62ntpd] end
<4>[  431.936056] [S62smb] start
<4>[  447.827132] ==== memory usage ====
<4>[  447.845181] MemTotal:         490756 kB
<4>[  447.849056] MemFree:           65664 kB
<4>[  447.852952] Buffers:           19068 kB
<4>[  447.856811] Cached:           282528 kB
<4>[  447.860686] SwapCached:          144 kB
<4>[  447.864545] Active:           124900 kB
<4>[  447.868402] Inactive:         247608 kB
<4>[  447.872273] Active(anon):      57624 kB
<4>[  447.876130] Inactive(anon):    68900 kB
<4>[  447.879985] Active(file):      67276 kB
<4>[  447.883855] Inactive(file):   178708 kB
<4>[  447.887715] Unevictable:        2012 kB
<4>[  447.891629] Mlocked:            2012 kB
<4>[  447.895489] SwapTotal:      24542452 kB
<4>[  447.899355] SwapFree:       24542032 kB
<4>[  447.903227] Dirty:               232 kB
<4>[  447.907107] Writeback:             0 kB
<4>[  447.910979] AnonPages:         72784 kB
<4>[  447.914837] Mapped:            17532 kB
<4>[  447.918691] Shmem:             55476 kB
<4>[  447.922559] Slab:              34104 kB
<4>[  447.926417] SReclaimable:      22408 kB
<4>[  447.930287] SUnreclaim:        11696 kB
<4>[  447.934144] KernelStack:        1848 kB
<4>[  447.937998] PageTables:         1616 kB
<4>[  447.941871] NFS_Unstable:          0 kB
<4>[  447.945729] Bounce:                0 kB
<4>[  447.949585] WritebackTmp:          0 kB
<4>[  447.953451] CommitLimit:    24787828 kB
<4>[  447.957306] Committed_AS:    1190852 kB
<4>[  447.961176] VmallocTotal:    1302528 kB
<4>[  447.965032] VmallocUsed:       61368 kB
<4>[  447.968894] VmallocChunk:    1212348 kB
<4>[  447.992042] Node 0, zone      DMA
<4>[  447.995395]   pages free     10972
<4>[  447.998822]         min      366
<4>[  448.002150]         low      457
<4>[  448.005410]         high     549
<4>[  448.008661]         scanned  0
<4>[  448.018080]         spanned  11264
<4>[  448.026463]         present  11154
<4>[  448.029907]     nr_free_pages 10972
<4>[  448.033484]     nr_inactive_anon 0
<4>[  448.036913]     nr_active_anon 0
<4>[  448.040162]     nr_inactive_file 0
<4>[  448.043627]     nr_active_file 0
<4>[  448.046882]     nr_unevictable 0
<4>[  448.050133]     nr_mlock     0
<4>[  448.053269]     nr_anon_pages 0
<4>[  448.056465]     nr_mapped    0
<4>[  448.059573]     nr_file_pages 0
<4>[  448.080337]     nr_dirty     0
<4>[  448.083495]     nr_writeback 0
<4>[  448.098068]     nr_slab_reclaimable 0
<4>[  448.108654]     nr_slab_unreclaimable 0
<4>[  448.116901]     nr_page_table_pages 0
<4>[  448.123641]     nr_kernel_stack 0
<4>[  448.126997]     nr_unstable  0
<4>[  448.130073]     nr_bounce    0
<4>[  448.135876]     nr_vmscan_write 0
<4>[  448.139259]     nr_vmscan_immediate_reclaim 0
<4>[  448.143996]     nr_writeback_temp 0
<4>[  448.147521]     nr_isolated_anon 0
<4>[  448.151634]     nr_isolated_file 0
<4>[  448.155078]     nr_shmem     0
<4>[  448.158158]     nr_dirtied   0
<4>[  448.161324]     nr_written   0
<4>[  448.164433]     nr_anon_transparent_hugepages 0
<4>[  448.169016]         protection: (0, 443, 443)
<4>[  448.173480]   pagesets
<4>[  448.175890]     cpu: 0
<4>[  448.178290]               count: 1
<4>[  448.181778]               high:  6
<4>[  448.185229]               batch: 1
<4>[  448.188674]   vm stats threshold: 4
<4>[  448.192230]     cpu: 1
<4>[  448.194617]               count: 0
<4>[  448.198046]               high:  6
<4>[  448.201505]               batch: 1
<4>[  448.204935]   vm stats threshold: 4
<4>[  448.208450]   all_unreclaimable: 0
<4>[  448.211906]   start_pfn:         0
<4>[  448.215335]   inactive_ratio:    1
<4>[  448.218763] Node 0, zone   Normal
<4>[  448.222199]   pages free     5473
<4>[  448.225544]         min      3729
<4>[  448.228885]         low      4661
<4>[  448.232258]         high     5593
<4>[  448.235605]         scanned  0
<4>[  448.238689]         spanned  119808
<4>[  448.242233]         present  113518
<4>[  448.245748]     nr_free_pages 5473
<4>[  448.249175]     nr_inactive_anon 17224
<4>[  448.252973]     nr_active_anon 14432
<4>[  448.256590]     nr_inactive_file 44677
<4>[  448.260390]     nr_active_file 16819
<4>[  448.263994]     nr_unevictable 503
<4>[  448.267420]     nr_mlock     503
<4>[  448.270694]     nr_anon_pages 18214
<4>[  448.274209]     nr_mapped    4392
<4>[  448.277545]     nr_file_pages 75435
<4>[  448.281080]     nr_dirty     58
<4>[  448.284243]     nr_writeback 0
<4>[  448.287318]     nr_slab_reclaimable 5602
<4>[  448.291287]     nr_slab_unreclaimable 2924
<4>[  448.295413]     nr_page_table_pages 415
<4>[  448.299271]     nr_kernel_stack 232
<4>[  448.302808]     nr_unstable  0
<4>[  448.305884]     nr_bounce    0
<4>[  448.308962]     nr_vmscan_write 105
<4>[  448.312494]     nr_vmscan_immediate_reclaim 1
<4>[  448.316881]     nr_writeback_temp 0
<4>[  448.320474]     nr_isolated_anon 0
<4>[  448.323915]     nr_isolated_file 0
<4>[  448.327339]     nr_shmem     13869
<4>[  448.330792]     nr_dirtied   241325
<4>[  448.334303]     nr_written   239015
<4>[  448.337812]     nr_anon_transparent_hugepages 0
<4>[  448.342392]         protection: (0, 0, 0)
<4>[  448.346426]   pagesets
<4>[  448.348808]     cpu: 0
<4>[  448.351211]               count: 112
<4>[  448.354808]               high:  186
<4>[  448.358403]               batch: 31
<4>[  448.361949]   vm stats threshold: 12
<4>[  448.365730]     cpu: 1
<4>[  448.368205]               count: 68
<4>[  448.371754]               high:  186
<4>[  448.375355]               batch: 31
<4>[  448.378864]   vm stats threshold: 12
<4>[  448.382483]   all_unreclaimable: 0
<4>[  448.385905]   start_pfn:         11264
<4>[  448.389675]   inactive_ratio:    1
<4>[  448.412072] Filename				Type		Size	Used	Priority
<4>[  448.416750] /dev/md256                              partition	530108	420	-1
<4>[  448.423780] /dev/md322                              partition	7235132	0	-2
<4>[  448.430704] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  448.452357]               total         used         free       shared      buffers
<4>[  448.452364]   Mem:       490756       424804        65952            0        19076
<4>[  448.452368]  Swap:     24542452          420     24542032
<4>[  448.452371] Total:     25033208       425224     24607984
<4>[  448.494876] ==== end ====
<4>[  456.976828] [S62smb] end
<4>[  456.980040] [S64MediaService] start
<4>[  457.534930] [S64MediaService] end
<4>[  457.539249] [S65thttpd] start
<4>[  465.627512] [S65thttpd] end
<4>[  465.631012] [S66ImRd] start
<4>[  465.635555] [S66ImRd] end
<4>[  465.638963] [S66wfm_thttpd] start
<4>[  468.651691] [S66wfm_thttpd] end
<4>[  468.655364] [S67ftp] start
<4>[  468.837190] [S67ftp] end
<4>[  468.840375] [S70crond] start
<4>[  468.844620] [S70crond] end
<4>[  468.848048] [S72logo] start
<4>[  468.852456] [S72logo] end
<4>[  468.855733] [S73ntpclient] start
<4>[  468.866901] [S73ntpclient] end
<4>[  468.872905] [S75stunnel] start
<4>[  468.877377] [S75stunnel] end
<4>[  468.894119] [S77recycled] start
<4>[  470.032168] [S77recycled] end
<4>[  470.035775] [S78qraid1] start
<4>[  470.040527] [S78qraid1] end
<4>[  470.044157] [S83ups] start
<4>[  470.048283] [S83ups] end
<4>[  470.078565] [S85login] start
<4>[  470.090760] [S85login] end
<4>[  470.094119] [S89bonjour] start
<4>[  470.098499] [S89bonjour] end
<4>[  470.155857] [S89wsd] start
<4>[  470.159888] [S89wsd] end
<6>[  472.129191] Bluetooth: Core ver 2.16
<6>[  472.132888] NET: Registered protocol family 31
<6>[  472.137363] Bluetooth: HCI device and connection manager initialized
<6>[  472.143773] Bluetooth: HCI socket layer initialized
<6>[  472.148668] Bluetooth: L2CAP socket layer initialized
<6>[  472.153792] Bluetooth: SCO socket layer initialized
<6>[  472.212116] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  472.217834] usbcore: registered new interface driver btusb
<6>[  472.270483] Bluetooth: RFCOMM TTY layer initialized
<6>[  472.275401] Bluetooth: RFCOMM socket layer initialized
<6>[  472.280609] Bluetooth: RFCOMM ver 1.11
<4>[  483.090809] [S90twonkymedia] start
<4>[  483.095567] [S90twonkymedia] end
<4>[  483.103777] [S92lunportman] start
<4>[  483.108917] [S92lunportman] end
<4>[  483.113715] [S95snmp] start
<4>[  483.117908] [S95snmp] end
<4>[  483.141068] [S97upnpd] start
<4>[  483.149383] [S97upnpd] end
<4>[  483.161271] [S98init_nas] start
<5>[  491.089177] UBI: attaching mtd6 to ubi2
<5>[  491.093084] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  491.099372] UBI: logical eraseblock size:    126976 bytes
<5>[  491.104807] UBI: smallest flash I/O unit:    2048
<5>[  491.109527] UBI: VID header offset:          2048 (aligned 2048)
<5>[  491.115618] UBI: data offset:                4096
<5>[  491.234042] UBI: max. sequence number:       444
<5>[  491.249300] UBI: attached mtd6 to ubi2
<5>[  491.253099] UBI: MTD device name:            "config"
<5>[  491.258165] UBI: MTD device size:            15 MiB
<5>[  491.263063] UBI: number of good PEBs:        120
<5>[  491.267691] UBI: number of bad PEBs:         0
<5>[  491.272151] UBI: number of corrupted PEBs:   0
<5>[  491.276606] UBI: max. allowed volumes:       128
<5>[  491.281239] UBI: wear-leveling threshold:    4096
<5>[  491.285955] UBI: number of internal volumes: 1
<5>[  491.290430] UBI: number of user volumes:     1
<5>[  491.294885] UBI: available PEBs:             0
<5>[  491.299339] UBI: total number of reserved PEBs: 120
<5>[  491.304244] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  491.310274] UBI: max/mean erase counter: 5/4
<5>[  491.314554] UBI: image sequence number:  1872325126
<5>[  491.319456] UBI: background thread "ubi_bgt2d" started, PID 11946
<5>[  491.436571] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  491.442611] UBIFS: mounted read-only
<5>[  491.446198] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  491.453796] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  491.461137] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  491.466988] UBIFS: default compressor: lzo
<5>[  491.471111] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  491.485840] UBIFS: un-mount UBI device 2, volume 0
<5>[  491.549802] UBI: mtd6 is detached from ubi2
<4>[  493.773287] rule type=2, num=0
<4>[  497.727695] [S98init_nas] end
<4>[  497.732225] [S99atalk] start
<4>[  497.736273] [S99atalk] end
<4>[  497.739586] [S99cloudinstall_report_complete_daemon] start
<4>[  497.761437] [S99cloudinstall_report_complete_daemon] end
<4>[  497.767371] [S99init_iTune] start
<4>[  497.797592] [S99init_iTune] end
<4>[  497.811113] [S99mysqld] start
<4>[  497.815818] [S99mysqld] end
<4>[  497.845277] [S99nfs] start
<4>[  497.852600] [S99nfs] end
<4>[  497.870552] [S99porter] start
<4>[  497.905218] [S99porter] end
<4>[  497.921228] [S99qanalytic] start
<4>[  497.925869] [S99qanalytic] end
<4>[  497.988793] [S99qcloud] start
<4>[  498.009557] [S99qcloud] end
<4>[  498.041341] [S99qsyncman] start
<4>[  498.045793] [S99qsyncman] end
<4>[  498.097214] [S99sdmd.sh] start
<4>[  498.142030] [S99sdmd.sh] end
<4>[  498.181249] [S99sync_action.sh] start
<4>[  498.186640] [S99sync_action.sh] end
<4>[  498.237018] [S99z_antivirus] start
<4>[  498.273789] [S99z_antivirus] end
<4>[  513.372342] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  513.380277] NFSD: starting 90-second grace period
<4>[  605.684380] ====== 2020-03-13 14:01:00 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  622.588693] UBI: attaching mtd6 to ubi2
<5>[  622.592551] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  622.598879] UBI: logical eraseblock size:    126976 bytes
<5>[  622.604298] UBI: smallest flash I/O unit:    2048
<5>[  622.609032] UBI: VID header offset:          2048 (aligned 2048)
<5>[  622.615067] UBI: data offset:                4096
<5>[  622.761350] UBI: max. sequence number:       444
<5>[  622.778421] UBI: attached mtd6 to ubi2
<5>[  622.782232] UBI: MTD device name:            "config"
<5>[  622.787325] UBI: MTD device size:            15 MiB
<5>[  622.792264] UBI: number of good PEBs:        120
<5>[  622.796913] UBI: number of bad PEBs:         0
<5>[  622.801403] UBI: number of corrupted PEBs:   0
<5>[  622.805868] UBI: max. allowed volumes:       128
<5>[  622.810519] UBI: wear-leveling threshold:    4096
<5>[  622.815241] UBI: number of internal volumes: 1
<5>[  622.819713] UBI: number of user volumes:     1
<5>[  622.824171] UBI: available PEBs:             0
<5>[  622.828644] UBI: total number of reserved PEBs: 120
<5>[  622.833548] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  622.839588] UBI: max/mean erase counter: 5/4
<5>[  622.843877] UBI: image sequence number:  1872325126
<5>[  622.858455] UBI: background thread "ubi_bgt2d" started, PID 17590
<5>[  623.008173] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  623.014252] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  623.021874] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  623.029220] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  623.035070] UBIFS: default compressor: lzo
<5>[  623.039193] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  623.261707] UBIFS: un-mount UBI device 2, volume 0
<5>[  623.329090] UBI: mtd6 is detached from ubi2
<6>[ 2178.678770] PHY: comcerto-0:06 - Link is Down
<6>[ 2179.678772] PHY: comcerto-0:06 - Link is Up - 1000/Full
<5>[22222.570335] UBI: attaching mtd6 to ubi2
<5>[22222.574188] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22222.580516] UBI: logical eraseblock size:    126976 bytes
<5>[22222.585941] UBI: smallest flash I/O unit:    2048
<5>[22222.590677] UBI: VID header offset:          2048 (aligned 2048)
<5>[22222.596699] UBI: data offset:                4096
<5>[22222.706633] UBI: max. sequence number:       445
<5>[22222.721939] UBI: attached mtd6 to ubi2
<5>[22222.725706] UBI: MTD device name:            "config"
<5>[22222.730800] UBI: MTD device size:            15 MiB
<5>[22222.735691] UBI: number of good PEBs:        120
<5>[22222.740329] UBI: number of bad PEBs:         0
<5>[22222.744783] UBI: number of corrupted PEBs:   0
<5>[22222.749243] UBI: max. allowed volumes:       128
<5>[22222.753872] UBI: wear-leveling threshold:    4096
<5>[22222.758595] UBI: number of internal volumes: 1
<5>[22222.763048] UBI: number of user volumes:     1
<5>[22222.767502] UBI: available PEBs:             0
<5>[22222.771966] UBI: total number of reserved PEBs: 120
<5>[22222.776864] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22222.782922] UBI: max/mean erase counter: 5/4
<5>[22222.787208] UBI: image sequence number:  1872325126
<5>[22222.792161] UBI: background thread "ubi_bgt2d" started, PID 18279
<5>[22222.912599] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22222.918653] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22222.926308] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22222.933655] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22222.939526] UBIFS: default compressor: lzo
<5>[22222.943634] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22223.145516] UBIFS: un-mount UBI device 2, volume 0
<5>[22223.215023] UBI: mtd6 is detached from ubi2
<5>[43822.656942] UBI: attaching mtd6 to ubi2
<5>[43822.660845] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[43822.667139] UBI: logical eraseblock size:    126976 bytes
<5>[43822.672667] UBI: smallest flash I/O unit:    2048
<5>[43822.677395] UBI: VID header offset:          2048 (aligned 2048)
<5>[43822.683442] UBI: data offset:                4096
<5>[43822.791286] UBI: max. sequence number:       446
<5>[43822.806588] UBI: attached mtd6 to ubi2
<5>[43822.810390] UBI: MTD device name:            "config"
<5>[43822.815457] UBI: MTD device size:            15 MiB
<5>[43822.820532] UBI: number of good PEBs:        120
<5>[43822.825166] UBI: number of bad PEBs:         0
<5>[43822.829642] UBI: number of corrupted PEBs:   0
<5>[43822.834097] UBI: max. allowed volumes:       128
<5>[43822.838879] UBI: wear-leveling threshold:    4096
<5>[43822.843600] UBI: number of internal volumes: 1
<5>[43822.848055] UBI: number of user volumes:     1
<5>[43822.852534] UBI: available PEBs:             0
<5>[43822.856989] UBI: total number of reserved PEBs: 120
<5>[43822.861889] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[43822.867911] UBI: max/mean erase counter: 5/4
<5>[43822.872201] UBI: image sequence number:  1872325126
<5>[43822.877106] UBI: background thread "ubi_bgt2d" started, PID 18403
<5>[43822.994565] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[43823.000628] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[43823.008219] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[43823.015566] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[43823.021432] UBIFS: default compressor: lzo
<5>[43823.025539] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[43823.237020] UBIFS: un-mount UBI device 2, volume 0
<5>[43823.308858] UBI: mtd6 is detached from ubi2
<5>[65430.464409] UBI: attaching mtd6 to ubi2
<5>[65430.468262] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[65430.474598] UBI: logical eraseblock size:    126976 bytes
<5>[65430.480025] UBI: smallest flash I/O unit:    2048
<5>[65430.484743] UBI: VID header offset:          2048 (aligned 2048)
<5>[65430.490775] UBI: data offset:                4096
<5>[65430.598789] UBI: max. sequence number:       449
<5>[65430.614093] UBI: attached mtd6 to ubi2
<5>[65430.617859] UBI: MTD device name:            "config"
<5>[65430.622961] UBI: MTD device size:            15 MiB
<5>[65430.627852] UBI: number of good PEBs:        120
<5>[65430.632491] UBI: number of bad PEBs:         0
<5>[65430.636952] UBI: number of corrupted PEBs:   0
<5>[65430.641425] UBI: max. allowed volumes:       128
<5>[65430.646055] UBI: wear-leveling threshold:    4096
<5>[65430.650779] UBI: number of internal volumes: 1
<5>[65430.655237] UBI: number of user volumes:     1
<5>[65430.659699] UBI: available PEBs:             0
<5>[65430.664158] UBI: total number of reserved PEBs: 120
<5>[65430.669058] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[65430.675080] UBI: max/mean erase counter: 5/4
<5>[65430.679365] UBI: image sequence number:  1872325126
<5>[65430.684271] UBI: background thread "ubi_bgt2d" started, PID 18389
<5>[65430.805129] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[65430.811338] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[65430.818956] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[65430.826293] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[65430.832157] UBIFS: default compressor: lzo
<5>[65430.836265] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[65431.038357] UBIFS: un-mount UBI device 2, volume 0
<5>[65431.110688] UBI: mtd6 is detached from ubi2
<5>[87022.801236] UBI: attaching mtd6 to ubi2
<5>[87022.805107] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[87022.811435] UBI: logical eraseblock size:    126976 bytes
<5>[87022.816850] UBI: smallest flash I/O unit:    2048
<5>[87022.821584] UBI: VID header offset:          2048 (aligned 2048)
<5>[87022.827612] UBI: data offset:                4096
<5>[87022.935373] UBI: max. sequence number:       450
<5>[87022.950909] UBI: attached mtd6 to ubi2
<5>[87022.954678] UBI: MTD device name:            "config"
<5>[87022.959792] UBI: MTD device size:            15 MiB
<5>[87022.964688] UBI: number of good PEBs:        120
<5>[87022.969368] UBI: number of bad PEBs:         0
<5>[87022.973836] UBI: number of corrupted PEBs:   0
<5>[87022.978292] UBI: max. allowed volumes:       128
<5>[87022.982949] UBI: wear-leveling threshold:    4096
<5>[87022.987677] UBI: number of internal volumes: 1
<5>[87022.992159] UBI: number of user volumes:     1
<5>[87022.996626] UBI: available PEBs:             0
<5>[87023.001113] UBI: total number of reserved PEBs: 120
<5>[87023.006012] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[87023.012051] UBI: max/mean erase counter: 5/4
<5>[87023.016332] UBI: image sequence number:  1872325126
<5>[87023.021398] UBI: background thread "ubi_bgt2d" started, PID 18426
<5>[87023.142371] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[87023.148401] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[87023.156022] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[87023.163367] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[87023.169222] UBIFS: default compressor: lzo
<5>[87023.173329] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[87023.378421] UBIFS: un-mount UBI device 2, volume 0
<5>[87023.434882] UBI: mtd6 is detached from ubi2
<5>[108622.864379] UBI: attaching mtd6 to ubi2
<5>[108622.868325] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[108622.874755] UBI: logical eraseblock size:    126976 bytes
<5>[108622.880276] UBI: smallest flash I/O unit:    2048
<5>[108622.885082] UBI: VID header offset:          2048 (aligned 2048)
<5>[108622.891203] UBI: data offset:                4096
<5>[108622.999182] UBI: max. sequence number:       451
<5>[108623.014571] UBI: attached mtd6 to ubi2
<5>[108623.018426] UBI: MTD device name:            "config"
<5>[108623.023609] UBI: MTD device size:            15 MiB
<5>[108623.028596] UBI: number of good PEBs:        120
<5>[108623.033311] UBI: number of bad PEBs:         0
<5>[108623.037852] UBI: number of corrupted PEBs:   0
<5>[108623.042401] UBI: max. allowed volumes:       128
<5>[108623.047118] UBI: wear-leveling threshold:    4096
<5>[108623.051928] UBI: number of internal volumes: 1
<5>[108623.056470] UBI: number of user volumes:     1
<5>[108623.061020] UBI: available PEBs:             0
<5>[108623.065561] UBI: total number of reserved PEBs: 120
<5>[108623.070551] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[108623.076663] UBI: max/mean erase counter: 5/4
<5>[108623.081042] UBI: image sequence number:  1872325126
<5>[108623.086054] UBI: background thread "ubi_bgt2d" started, PID 18369
<5>[108623.207711] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[108623.213845] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[108623.221537] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[108623.228973] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[108623.234911] UBIFS: default compressor: lzo
<5>[108623.239113] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[108623.441201] UBIFS: un-mount UBI device 2, volume 0
<5>[108623.484917] UBI: mtd6 is detached from ubi2
<5>[130222.938979] UBI: attaching mtd6 to ubi2
<5>[130222.942918] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[130222.949329] UBI: logical eraseblock size:    126976 bytes
<5>[130222.954850] UBI: smallest flash I/O unit:    2048
<5>[130222.959688] UBI: VID header offset:          2048 (aligned 2048)
<5>[130222.965901] UBI: data offset:                4096
<5>[130223.073896] UBI: max. sequence number:       452
<5>[130223.089318] UBI: attached mtd6 to ubi2
<5>[130223.093172] UBI: MTD device name:            "config"
<5>[130223.098325] UBI: MTD device size:            15 MiB
<5>[130223.103347] UBI: number of good PEBs:        120
<5>[130223.108065] UBI: number of bad PEBs:         0
<5>[130223.112619] UBI: number of corrupted PEBs:   0
<5>[130223.117161] UBI: max. allowed volumes:       128
<5>[130223.121885] UBI: wear-leveling threshold:    4096
<5>[130223.126687] UBI: number of internal volumes: 1
<5>[130223.131236] UBI: number of user volumes:     1
<5>[130223.135777] UBI: available PEBs:             0
<5>[130223.140327] UBI: total number of reserved PEBs: 120
<5>[130223.145305] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[130223.151420] UBI: max/mean erase counter: 5/4
<5>[130223.155788] UBI: image sequence number:  1872325126
<5>[130223.160804] UBI: background thread "ubi_bgt2d" started, PID 18087
<5>[130223.282418] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[130223.288535] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[130223.296258] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[130223.303689] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[130223.309635] UBIFS: default compressor: lzo
<5>[130223.313829] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[130223.524590] UBIFS: un-mount UBI device 2, volume 0
<5>[130223.594779] UBI: mtd6 is detached from ubi2
<5>[151823.009494] UBI: attaching mtd6 to ubi2
<5>[151823.013434] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[151823.019830] UBI: logical eraseblock size:    126976 bytes
<5>[151823.025332] UBI: smallest flash I/O unit:    2048
<5>[151823.030147] UBI: VID header offset:          2048 (aligned 2048)
<5>[151823.036256] UBI: data offset:                4096
<5>[151823.144212] UBI: max. sequence number:       453
<5>[151823.159625] UBI: attached mtd6 to ubi2
<5>[151823.163481] UBI: MTD device name:            "config"
<5>[151823.168655] UBI: MTD device size:            15 MiB
<5>[151823.173632] UBI: number of good PEBs:        120
<5>[151823.178347] UBI: number of bad PEBs:         0
<5>[151823.182900] UBI: number of corrupted PEBs:   0
<5>[151823.187443] UBI: max. allowed volumes:       128
<5>[151823.192169] UBI: wear-leveling threshold:    4096
<5>[151823.196978] UBI: number of internal volumes: 1
<5>[151823.201560] UBI: number of user volumes:     1
<5>[151823.206115] UBI: available PEBs:             0
<5>[151823.210678] UBI: total number of reserved PEBs: 120
<5>[151823.215656] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[151823.221773] UBI: max/mean erase counter: 5/4
<5>[151823.226148] UBI: image sequence number:  1872325126
<5>[151823.231163] UBI: background thread "ubi_bgt2d" started, PID 18398
<5>[151823.352746] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[151823.358889] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[151823.366578] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[151823.374011] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[151823.379973] UBIFS: default compressor: lzo
<5>[151823.384167] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[151823.585825] UBIFS: un-mount UBI device 2, volume 0
<5>[151823.644812] UBI: mtd6 is detached from ubi2
<5>[173423.084973] UBI: attaching mtd6 to ubi2
<5>[173423.088956] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[173423.095336] UBI: logical eraseblock size:    126976 bytes
<5>[173423.100854] UBI: smallest flash I/O unit:    2048
<5>[173423.105682] UBI: VID header offset:          2048 (aligned 2048)
<5>[173423.111809] UBI: data offset:                4096
<5>[173423.219821] UBI: max. sequence number:       454
<5>[173423.235185] UBI: attached mtd6 to ubi2
<5>[173423.239086] UBI: MTD device name:            "config"
<5>[173423.244241] UBI: MTD device size:            15 MiB
<5>[173423.249231] UBI: number of good PEBs:        120
<5>[173423.253947] UBI: number of bad PEBs:         0
<5>[173423.258487] UBI: number of corrupted PEBs:   0
<5>[173423.263036] UBI: max. allowed volumes:       128
<5>[173423.267752] UBI: wear-leveling threshold:    4096
<5>[173423.272562] UBI: number of internal volumes: 1
<5>[173423.277104] UBI: number of user volumes:     1
<5>[173423.281652] UBI: available PEBs:             0
<5>[173423.286193] UBI: total number of reserved PEBs: 120
<5>[173423.291178] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[173423.297289] UBI: max/mean erase counter: 5/4
<5>[173423.301662] UBI: image sequence number:  1872325126
<5>[173423.306653] UBI: background thread "ubi_bgt2d" started, PID 18076
<5>[173423.423913] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[173423.430056] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[173423.437736] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[173423.445170] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[173423.451118] UBIFS: default compressor: lzo
<5>[173423.455313] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[173423.673066] UBIFS: un-mount UBI device 2, volume 0
<5>[173423.730983] UBI: mtd6 is detached from ubi2
<5>[195023.159698] UBI: attaching mtd6 to ubi2
<5>[195023.163646] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[195023.170056] UBI: logical eraseblock size:    126976 bytes
<5>[195023.175562] UBI: smallest flash I/O unit:    2048
<5>[195023.180411] UBI: VID header offset:          2048 (aligned 2048)
<5>[195023.186538] UBI: data offset:                4096
<5>[195023.295848] UBI: max. sequence number:       455
<5>[195023.311388] UBI: attached mtd6 to ubi2
<5>[195023.315279] UBI: MTD device name:            "config"
<5>[195023.320470] UBI: MTD device size:            15 MiB
<5>[195023.325461] UBI: number of good PEBs:        120
<5>[195023.330203] UBI: number of bad PEBs:         0
<5>[195023.334756] UBI: number of corrupted PEBs:   0
<5>[195023.339319] UBI: max. allowed volumes:       128
<5>[195023.344047] UBI: wear-leveling threshold:    4096
<5>[195023.348870] UBI: number of internal volumes: 1
<5>[195023.353423] UBI: number of user volumes:     1
<5>[195023.357977] UBI: available PEBs:             0
<5>[195023.362540] UBI: total number of reserved PEBs: 120
<5>[195023.367544] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[195023.373693] UBI: max/mean erase counter: 5/4
<5>[195023.378069] UBI: image sequence number:  1872325126
<5>[195023.383117] UBI: background thread "ubi_bgt2d" started, PID 19470
<5>[195023.504668] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[195023.510809] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[195023.518488] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[195023.525923] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[195023.531869] UBIFS: default compressor: lzo
<5>[195023.536064] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[195023.737502] UBIFS: un-mount UBI device 2, volume 0
<5>[195023.812874] UBI: mtd6 is detached from ubi2
<5>[216623.235153] UBI: attaching mtd6 to ubi2
<5>[216623.239140] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[216623.245519] UBI: logical eraseblock size:    126976 bytes
<5>[216623.251031] UBI: smallest flash I/O unit:    2048
<5>[216623.255907] UBI: VID header offset:          2048 (aligned 2048)
<5>[216623.262039] UBI: data offset:                4096
<5>[216623.370304] UBI: max. sequence number:       456
<5>[216623.385710] UBI: attached mtd6 to ubi2
<5>[216623.389603] UBI: MTD device name:            "config"
<5>[216623.394762] UBI: MTD device size:            15 MiB
<5>[216623.399755] UBI: number of good PEBs:        120
<5>[216623.404471] UBI: number of bad PEBs:         0
<5>[216623.409020] UBI: number of corrupted PEBs:   0
<5>[216623.413561] UBI: max. allowed volumes:       128
<5>[216623.418276] UBI: wear-leveling threshold:    4096
<5>[216623.423086] UBI: number of internal volumes: 1
<5>[216623.427627] UBI: number of user volumes:     1
<5>[216623.432174] UBI: available PEBs:             0
<5>[216623.436715] UBI: total number of reserved PEBs: 120
<5>[216623.441699] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[216623.447808] UBI: max/mean erase counter: 5/4
<5>[216623.452181] UBI: image sequence number:  1872325126
<5>[216623.457197] UBI: background thread "ubi_bgt2d" started, PID 19466
<5>[216623.578598] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[216623.584714] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[216623.592407] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[216623.599834] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[216623.605771] UBIFS: default compressor: lzo
<5>[216623.609974] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[216623.813981] UBIFS: un-mount UBI device 2, volume 0
<5>[216623.898970] UBI: mtd6 is detached from ubi2
<5>[238223.307803] UBI: attaching mtd6 to ubi2
<5>[238223.311799] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[238223.318179] UBI: logical eraseblock size:    126976 bytes
<5>[238223.323696] UBI: smallest flash I/O unit:    2048
<5>[238223.328501] UBI: VID header offset:          2048 (aligned 2048)
<5>[238223.334627] UBI: data offset:                4096
<5>[238223.442401] UBI: max. sequence number:       457
<5>[238223.457749] UBI: attached mtd6 to ubi2
<5>[238223.461634] UBI: MTD device name:            "config"
<5>[238223.466788] UBI: MTD device size:            15 MiB
<5>[238223.471774] UBI: number of good PEBs:        120
<5>[238223.476490] UBI: number of bad PEBs:         0
<5>[238223.481042] UBI: number of corrupted PEBs:   0
<5>[238223.485583] UBI: max. allowed volumes:       128
<5>[238223.490309] UBI: wear-leveling threshold:    4096
<5>[238223.495112] UBI: number of internal volumes: 1
<5>[238223.499663] UBI: number of user volumes:     1
<5>[238223.504205] UBI: available PEBs:             0
<5>[238223.508753] UBI: total number of reserved PEBs: 120
<5>[238223.513730] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[238223.519865] UBI: max/mean erase counter: 5/4
<5>[238223.524233] UBI: image sequence number:  1872325126
<5>[238223.529251] UBI: background thread "ubi_bgt2d" started, PID 19528
<5>[238223.650382] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[238223.656498] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[238223.664198] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[238223.671629] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[238223.677564] UBIFS: default compressor: lzo
<5>[238223.681766] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[238223.894152] UBIFS: un-mount UBI device 2, volume 0
<5>[238223.945505] UBI: mtd6 is detached from ubi2
<5>[259823.403365] UBI: attaching mtd6 to ubi2
<5>[259823.407304] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[259823.413716] UBI: logical eraseblock size:    126976 bytes
<5>[259823.419236] UBI: smallest flash I/O unit:    2048
<5>[259823.424044] UBI: VID header offset:          2048 (aligned 2048)
<5>[259823.430165] UBI: data offset:                4096
<5>[259823.538485] UBI: max. sequence number:       458
<5>[259823.553897] UBI: attached mtd6 to ubi2
<5>[259823.557752] UBI: MTD device name:            "config"
<5>[259823.562929] UBI: MTD device size:            15 MiB
<5>[259823.567905] UBI: number of good PEBs:        120
<5>[259823.572628] UBI: number of bad PEBs:         0
<5>[259823.577169] UBI: number of corrupted PEBs:   0
<5>[259823.581718] UBI: max. allowed volumes:       128
<5>[259823.586435] UBI: wear-leveling threshold:    4096
<5>[259823.591247] UBI: number of internal volumes: 1
<5>[259823.595792] UBI: number of user volumes:     1
<5>[259823.600341] UBI: available PEBs:             0
<5>[259823.604883] UBI: total number of reserved PEBs: 120
<5>[259823.609873] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[259823.615984] UBI: max/mean erase counter: 5/4
<5>[259823.620359] UBI: image sequence number:  1872325126
<5>[259823.625351] UBI: background thread "ubi_bgt2d" started, PID 21905
<5>[259823.744943] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[259823.751083] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[259823.758799] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[259823.766244] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[259823.772233] UBIFS: default compressor: lzo
<5>[259823.776435] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[259823.983624] UBIFS: un-mount UBI device 2, volume 0
<5>[259824.041284] UBI: mtd6 is detached from ubi2
<5>[281423.460287] UBI: attaching mtd6 to ubi2
<5>[281423.464241] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[281423.470657] UBI: logical eraseblock size:    126976 bytes
<5>[281423.476186] UBI: smallest flash I/O unit:    2048
<5>[281423.481009] UBI: VID header offset:          2048 (aligned 2048)
<5>[281423.487119] UBI: data offset:                4096
<5>[281423.595172] UBI: max. sequence number:       459
<5>[281423.610560] UBI: attached mtd6 to ubi2
<5>[281423.614422] UBI: MTD device name:            "config"
<5>[281423.619609] UBI: MTD device size:            15 MiB
<5>[281423.624589] UBI: number of good PEBs:        120
<5>[281423.629315] UBI: number of bad PEBs:         0
<5>[281423.633857] UBI: number of corrupted PEBs:   0
<5>[281423.638397] UBI: max. allowed volumes:       128
<5>[281423.643121] UBI: wear-leveling threshold:    4096
<5>[281423.647924] UBI: number of internal volumes: 1
<5>[281423.652473] UBI: number of user volumes:     1
<5>[281423.657014] UBI: available PEBs:             0
<5>[281423.661568] UBI: total number of reserved PEBs: 120
<5>[281423.666546] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[281423.672663] UBI: max/mean erase counter: 5/4
<5>[281423.677031] UBI: image sequence number:  1872325126
<5>[281423.682059] UBI: background thread "ubi_bgt2d" started, PID 22681
<5>[281423.808748] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[281423.814877] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[281423.822578] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[281423.830003] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[281423.835939] UBIFS: default compressor: lzo
<5>[281423.840145] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[281424.043017] UBIFS: un-mount UBI device 2, volume 0
<5>[281424.105126] UBI: mtd6 is detached from ubi2
<5>[303023.532223] UBI: attaching mtd6 to ubi2
<5>[303023.536163] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[303023.542593] UBI: logical eraseblock size:    126976 bytes
<5>[303023.548117] UBI: smallest flash I/O unit:    2048
<5>[303023.552959] UBI: VID header offset:          2048 (aligned 2048)
<5>[303023.559092] UBI: data offset:                4096
<5>[303023.666934] UBI: max. sequence number:       460
<5>[303023.682308] UBI: attached mtd6 to ubi2
<5>[303023.686164] UBI: MTD device name:            "config"
<5>[303023.691339] UBI: MTD device size:            15 MiB
<5>[303023.696317] UBI: number of good PEBs:        120
<5>[303023.701042] UBI: number of bad PEBs:         0
<5>[303023.705584] UBI: number of corrupted PEBs:   0
<5>[303023.710135] UBI: max. allowed volumes:       128
<5>[303023.714851] UBI: wear-leveling threshold:    4096
<5>[303023.719666] UBI: number of internal volumes: 1
<5>[303023.724208] UBI: number of user volumes:     1
<5>[303023.728760] UBI: available PEBs:             0
<5>[303023.733303] UBI: total number of reserved PEBs: 120
<5>[303023.738279] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[303023.744396] UBI: max/mean erase counter: 5/4
<5>[303023.748777] UBI: image sequence number:  1872325126
<5>[303023.753770] UBI: background thread "ubi_bgt2d" started, PID 23279
<5>[303023.879069] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[303023.885185] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[303023.892894] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[303023.900323] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[303023.906259] UBIFS: default compressor: lzo
<5>[303023.910459] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[303024.117465] UBIFS: un-mount UBI device 2, volume 0
<5>[303024.164858] UBI: mtd6 is detached from ubi2
<5>[324623.614298] UBI: attaching mtd6 to ubi2
<5>[324623.618238] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[324623.624646] UBI: logical eraseblock size:    126976 bytes
<5>[324623.630161] UBI: smallest flash I/O unit:    2048
<5>[324623.634965] UBI: VID header offset:          2048 (aligned 2048)
<5>[324623.641082] UBI: data offset:                4096
<5>[324623.748896] UBI: max. sequence number:       461
<5>[324623.764262] UBI: attached mtd6 to ubi2
<5>[324623.768123] UBI: MTD device name:            "config"
<5>[324623.773302] UBI: MTD device size:            15 MiB
<5>[324623.778278] UBI: number of good PEBs:        120
<5>[324623.783004] UBI: number of bad PEBs:         0
<5>[324623.787547] UBI: number of corrupted PEBs:   0
<5>[324623.792096] UBI: max. allowed volumes:       128
<5>[324623.796812] UBI: wear-leveling threshold:    4096
<5>[324623.801623] UBI: number of internal volumes: 1
<5>[324623.806164] UBI: number of user volumes:     1
<5>[324623.810712] UBI: available PEBs:             0
<5>[324623.815258] UBI: total number of reserved PEBs: 120
<5>[324623.820243] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[324623.826352] UBI: max/mean erase counter: 5/4
<5>[324623.830732] UBI: image sequence number:  1872325126
<5>[324623.835722] UBI: background thread "ubi_bgt2d" started, PID 23199
<5>[324623.955451] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[324623.961598] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[324623.969294] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[324623.976743] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[324623.982772] UBIFS: default compressor: lzo
<5>[324623.987023] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[324624.190175] UBIFS: un-mount UBI device 2, volume 0
<5>[324624.254909] UBI: mtd6 is detached from ubi2
<5>[346223.689538] UBI: attaching mtd6 to ubi2
<5>[346223.693490] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[346223.699895] UBI: logical eraseblock size:    126976 bytes
<5>[346223.705396] UBI: smallest flash I/O unit:    2048
<5>[346223.710212] UBI: VID header offset:          2048 (aligned 2048)
<5>[346223.716322] UBI: data offset:                4096
<5>[346223.824106] UBI: max. sequence number:       462
<5>[346223.839619] UBI: attached mtd6 to ubi2
<5>[346223.843472] UBI: MTD device name:            "config"
<5>[346223.848650] UBI: MTD device size:            15 MiB
<5>[346223.853629] UBI: number of good PEBs:        120
<5>[346223.858344] UBI: number of bad PEBs:         0
<5>[346223.862910] UBI: number of corrupted PEBs:   0
<5>[346223.867453] UBI: max. allowed volumes:       128
<5>[346223.872186] UBI: wear-leveling threshold:    4096
<5>[346223.876989] UBI: number of internal volumes: 1
<5>[346223.881542] UBI: number of user volumes:     1
<5>[346223.886088] UBI: available PEBs:             0
<5>[346223.890645] UBI: total number of reserved PEBs: 120
<5>[346223.895623] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[346223.901747] UBI: max/mean erase counter: 6/4
<5>[346223.906116] UBI: image sequence number:  1872325126
<5>[346223.911113] UBI: background thread "ubi_bgt2d" started, PID 24311
<5>[346224.033472] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[346224.039611] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[346224.047282] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[346224.054708] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[346224.060650] UBIFS: default compressor: lzo
<5>[346224.064845] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[346224.274188] UBIFS: un-mount UBI device 2, volume 0
<5>[346224.325017] UBI: mtd6 is detached from ubi2
<5>[367823.755136] UBI: attaching mtd6 to ubi2
<5>[367823.759106] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[367823.765485] UBI: logical eraseblock size:    126976 bytes
<5>[367823.771000] UBI: smallest flash I/O unit:    2048
<5>[367823.775805] UBI: VID header offset:          2048 (aligned 2048)
<5>[367823.781937] UBI: data offset:                4096
<5>[367823.890039] UBI: max. sequence number:       463
<5>[367823.905488] UBI: attached mtd6 to ubi2
<5>[367823.909371] UBI: MTD device name:            "config"
<5>[367823.914525] UBI: MTD device size:            15 MiB
<5>[367823.919516] UBI: number of good PEBs:        120
<5>[367823.924232] UBI: number of bad PEBs:         0
<5>[367823.928782] UBI: number of corrupted PEBs:   0
<5>[367823.933324] UBI: max. allowed volumes:       128
<5>[367823.938039] UBI: wear-leveling threshold:    4096
<5>[367823.942849] UBI: number of internal volumes: 1
<5>[367823.947392] UBI: number of user volumes:     1
<5>[367823.951939] UBI: available PEBs:             0
<5>[367823.956481] UBI: total number of reserved PEBs: 120
<5>[367823.961477] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[367823.967589] UBI: max/mean erase counter: 6/4
<5>[367823.971970] UBI: image sequence number:  1872325126
<5>[367823.976992] UBI: background thread "ubi_bgt2d" started, PID 25055
<5>[367824.098917] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[367824.105044] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[367824.112746] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[367824.120183] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[367824.126120] UBIFS: default compressor: lzo
<5>[367824.130324] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[367824.342719] UBIFS: un-mount UBI device 2, volume 0
<5>[367824.408954] UBI: mtd6 is detached from ubi2
<5>[389423.844650] UBI: attaching mtd6 to ubi2
<5>[389423.848621] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[389423.855007] UBI: logical eraseblock size:    126976 bytes
<5>[389423.860517] UBI: smallest flash I/O unit:    2048
<5>[389423.865393] UBI: VID header offset:          2048 (aligned 2048)
<5>[389423.871514] UBI: data offset:                4096
<5>[389423.979484] UBI: max. sequence number:       464
<5>[389423.994873] UBI: attached mtd6 to ubi2
<5>[389423.998769] UBI: MTD device name:            "config"
<5>[389424.003926] UBI: MTD device size:            15 MiB
<5>[389424.008916] UBI: number of good PEBs:        120
<5>[389424.013631] UBI: number of bad PEBs:         0
<5>[389424.018171] UBI: number of corrupted PEBs:   0
<5>[389424.022724] UBI: max. allowed volumes:       128
<5>[389424.027447] UBI: wear-leveling threshold:    4096
<5>[389424.032304] UBI: number of internal volumes: 1
<5>[389424.036856] UBI: number of user volumes:     1
<5>[389424.041412] UBI: available PEBs:             0
<5>[389424.045954] UBI: total number of reserved PEBs: 120
<5>[389424.050939] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[389424.057049] UBI: max/mean erase counter: 6/4
<5>[389424.061423] UBI: image sequence number:  1872325126
<5>[389424.066415] UBI: background thread "ubi_bgt2d" started, PID 26120
<5>[389424.190736] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[389424.196862] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[389424.204564] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[389424.211996] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[389424.217931] UBIFS: default compressor: lzo
<5>[389424.222135] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[389424.463764] UBIFS: un-mount UBI device 2, volume 0
<5>[389424.539046] UBI: mtd6 is detached from ubi2
<5>[411023.911527] UBI: attaching mtd6 to ubi2
<5>[411023.915466] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[411023.921880] UBI: logical eraseblock size:    126976 bytes
<5>[411023.927388] UBI: smallest flash I/O unit:    2048
<5>[411023.932202] UBI: VID header offset:          2048 (aligned 2048)
<5>[411023.938311] UBI: data offset:                4096
<5>[411024.046271] UBI: max. sequence number:       465
<5>[411024.061714] UBI: attached mtd6 to ubi2
<5>[411024.065568] UBI: MTD device name:            "config"
<5>[411024.070747] UBI: MTD device size:            15 MiB
<5>[411024.075725] UBI: number of good PEBs:        120
<5>[411024.080452] UBI: number of bad PEBs:         0
<5>[411024.084994] UBI: number of corrupted PEBs:   0
<5>[411024.089544] UBI: max. allowed volumes:       128
<5>[411024.094261] UBI: wear-leveling threshold:    4096
<5>[411024.099071] UBI: number of internal volumes: 1
<5>[411024.103613] UBI: number of user volumes:     1
<5>[411024.108158] UBI: available PEBs:             0
<5>[411024.112708] UBI: total number of reserved PEBs: 120
<5>[411024.117686] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[411024.123802] UBI: max/mean erase counter: 6/4
<5>[411024.128169] UBI: image sequence number:  1872325126
<5>[411024.133180] UBI: background thread "ubi_bgt2d" started, PID 26219
<5>[411024.253216] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[411024.259366] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[411024.267048] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[411024.274504] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[411024.280469] UBIFS: default compressor: lzo
<5>[411024.284671] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[411024.491998] UBIFS: un-mount UBI device 2, volume 0
<5>[411024.544900] UBI: mtd6 is detached from ubi2
<6>[431427.120927] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
<5>[432623.984400] UBI: attaching mtd6 to ubi2
<5>[432623.988365] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[432623.994772] UBI: logical eraseblock size:    126976 bytes
<5>[432624.000286] UBI: smallest flash I/O unit:    2048
<5>[432624.005095] UBI: VID header offset:          2048 (aligned 2048)
<5>[432624.011234] UBI: data offset:                4096
<5>[432624.122174] UBI: max. sequence number:       466
<5>[432624.137561] UBI: attached mtd6 to ubi2
<5>[432624.141442] UBI: MTD device name:            "config"
<5>[432624.146596] UBI: MTD device size:            15 MiB
<5>[432624.151585] UBI: number of good PEBs:        120
<5>[432624.156306] UBI: number of bad PEBs:         0
<5>[432624.160859] UBI: number of corrupted PEBs:   0
<5>[432624.165413] UBI: max. allowed volumes:       128
<5>[432624.170141] UBI: wear-leveling threshold:    4096
<5>[432624.174950] UBI: number of internal volumes: 1
<5>[432624.179506] UBI: number of user volumes:     1
<5>[432624.184052] UBI: available PEBs:             0
<5>[432624.188610] UBI: total number of reserved PEBs: 120
<5>[432624.193588] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[432624.199704] UBI: max/mean erase counter: 6/4
<5>[432624.204072] UBI: image sequence number:  1872325126
<5>[432624.209084] UBI: background thread "ubi_bgt2d" started, PID 30451
<5>[432624.331940] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[432624.338056] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[432624.345754] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[432624.353183] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[432624.359132] UBIFS: default compressor: lzo
<5>[432624.363328] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[432624.571492] UBIFS: un-mount UBI device 2, volume 0
<5>[432624.634875] UBI: mtd6 is detached from ubi2
<5>[454224.078663] UBI: attaching mtd6 to ubi2
<5>[454224.082602] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[454224.088997] UBI: logical eraseblock size:    126976 bytes
<5>[454224.094508] UBI: smallest flash I/O unit:    2048
<5>[454224.099394] UBI: VID header offset:          2048 (aligned 2048)
<5>[454224.105503] UBI: data offset:                4096
<5>[454224.214869] UBI: max. sequence number:       467
<5>[454224.230386] UBI: attached mtd6 to ubi2
<5>[454224.234239] UBI: MTD device name:            "config"
<5>[454224.239416] UBI: MTD device size:            15 MiB
<5>[454224.244509] UBI: number of good PEBs:        120
<5>[454224.249247] UBI: number of bad PEBs:         0
<5>[454224.253870] UBI: number of corrupted PEBs:   0
<5>[454224.258416] UBI: max. allowed volumes:       128
<5>[454224.263149] UBI: wear-leveling threshold:    4096
<5>[454224.268022] UBI: number of internal volumes: 1
<5>[454224.272667] UBI: number of user volumes:     1
<5>[454224.277344] UBI: available PEBs:             0
<5>[454224.281911] UBI: total number of reserved PEBs: 120
<5>[454224.286891] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[454224.293008] UBI: max/mean erase counter: 6/4
<5>[454224.297375] UBI: image sequence number:  1872325126
<5>[454224.302390] UBI: background thread "ubi_bgt2d" started, PID 1733
<5>[454224.423272] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[454224.429410] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[454224.437090] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[454224.444517] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[454224.450461] UBIFS: default compressor: lzo
<5>[454224.454656] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[454224.658865] UBIFS: un-mount UBI device 2, volume 0
<5>[454224.718997] UBI: mtd6 is detached from ubi2
<5>[475824.141779] UBI: attaching mtd6 to ubi2
<5>[475824.145748] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[475824.152193] UBI: logical eraseblock size:    126976 bytes
<5>[475824.157701] UBI: smallest flash I/O unit:    2048
<5>[475824.162525] UBI: VID header offset:          2048 (aligned 2048)
<5>[475824.168643] UBI: data offset:                4096
<5>[475824.276885] UBI: max. sequence number:       468
<5>[475824.292330] UBI: attached mtd6 to ubi2
<5>[475824.296189] UBI: MTD device name:            "config"
<5>[475824.301370] UBI: MTD device size:            15 MiB
<5>[475824.306349] UBI: number of good PEBs:        120
<5>[475824.311078] UBI: number of bad PEBs:         0
<5>[475824.315621] UBI: number of corrupted PEBs:   0
<5>[475824.320171] UBI: max. allowed volumes:       128
<5>[475824.324887] UBI: wear-leveling threshold:    4096
<5>[475824.329700] UBI: number of internal volumes: 1
<5>[475824.334243] UBI: number of user volumes:     1
<5>[475824.338790] UBI: available PEBs:             0
<5>[475824.343332] UBI: total number of reserved PEBs: 120
<5>[475824.348308] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[475824.354425] UBI: max/mean erase counter: 6/4
<5>[475824.358800] UBI: image sequence number:  1872325126
<5>[475824.363793] UBI: background thread "ubi_bgt2d" started, PID 2782
<5>[475824.486904] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[475824.493041] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[475824.500734] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[475824.508154] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[475824.514098] UBIFS: default compressor: lzo
<5>[475824.518293] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[475824.721211] UBIFS: un-mount UBI device 2, volume 0
<5>[475824.774841] UBI: mtd6 is detached from ubi2
<5>[497424.217248] UBI: attaching mtd6 to ubi2
<5>[497424.221241] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[497424.227632] UBI: logical eraseblock size:    126976 bytes
<5>[497424.233161] UBI: smallest flash I/O unit:    2048
<5>[497424.237966] UBI: VID header offset:          2048 (aligned 2048)
<5>[497424.244085] UBI: data offset:                4096
<5>[497424.351858] UBI: max. sequence number:       469
<5>[497424.367259] UBI: attached mtd6 to ubi2
<5>[497424.371156] UBI: MTD device name:            "config"
<5>[497424.376311] UBI: MTD device size:            15 MiB
<5>[497424.381302] UBI: number of good PEBs:        120
<5>[497424.386018] UBI: number of bad PEBs:         0
<5>[497424.390568] UBI: number of corrupted PEBs:   0
<5>[497424.395110] UBI: max. allowed volumes:       128
<5>[497424.399834] UBI: wear-leveling threshold:    4096
<5>[497424.404641] UBI: number of internal volumes: 1
<5>[497424.409196] UBI: number of user volumes:     1
<5>[497424.413740] UBI: available PEBs:             0
<5>[497424.418281] UBI: total number of reserved PEBs: 120
<5>[497424.423268] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[497424.429386] UBI: max/mean erase counter: 6/4
<5>[497424.433755] UBI: image sequence number:  1872325126
<5>[497424.438793] UBI: background thread "ubi_bgt2d" started, PID 4136
<5>[497424.570782] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[497424.576899] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[497424.584607] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[497424.592042] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[497424.597979] UBIFS: default compressor: lzo
<5>[497424.602186] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[497424.804668] UBIFS: un-mount UBI device 2, volume 0
<5>[497424.864860] UBI: mtd6 is detached from ubi2
<5>[519024.278877] UBI: attaching mtd6 to ubi2
<5>[519024.282818] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[519024.289212] UBI: logical eraseblock size:    126976 bytes
<5>[519024.294719] UBI: smallest flash I/O unit:    2048
<5>[519024.299538] UBI: VID header offset:          2048 (aligned 2048)
<5>[519024.305652] UBI: data offset:                4096
<5>[519024.414009] UBI: max. sequence number:       472
<5>[519024.429649] UBI: attached mtd6 to ubi2
<5>[519024.433510] UBI: MTD device name:            "config"
<5>[519024.438689] UBI: MTD device size:            15 MiB
<5>[519024.443667] UBI: number of good PEBs:        120
<5>[519024.448382] UBI: number of bad PEBs:         0
<5>[519024.452933] UBI: number of corrupted PEBs:   0
<5>[519024.457475] UBI: max. allowed volumes:       128
<5>[519024.462198] UBI: wear-leveling threshold:    4096
<5>[519024.467001] UBI: number of internal volumes: 1
<5>[519024.471550] UBI: number of user volumes:     1
<5>[519024.476101] UBI: available PEBs:             0
<5>[519024.480662] UBI: total number of reserved PEBs: 120
<5>[519024.485642] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[519024.491791] UBI: max/mean erase counter: 6/4
<5>[519024.496170] UBI: image sequence number:  1872325126
<5>[519024.501300] UBI: background thread "ubi_bgt2d" started, PID 6104
<5>[519024.632395] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[519024.638511] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[519024.646213] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[519024.653643] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[519024.659591] UBIFS: default compressor: lzo
<5>[519024.663786] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[519024.868488] UBIFS: un-mount UBI device 2, volume 0
<5>[519024.914849] UBI: mtd6 is detached from ubi2
<5>[540624.351089] UBI: attaching mtd6 to ubi2
<5>[540624.355029] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[540624.361444] UBI: logical eraseblock size:    126976 bytes
<5>[540624.366951] UBI: smallest flash I/O unit:    2048
<5>[540624.371771] UBI: VID header offset:          2048 (aligned 2048)
<5>[540624.377881] UBI: data offset:                4096
<5>[540624.485730] UBI: max. sequence number:       473
<5>[540624.501152] UBI: attached mtd6 to ubi2
<5>[540624.505007] UBI: MTD device name:            "config"
<5>[540624.510217] UBI: MTD device size:            15 MiB
<5>[540624.515233] UBI: number of good PEBs:        120
<5>[540624.519980] UBI: number of bad PEBs:         0
<5>[540624.524546] UBI: number of corrupted PEBs:   0
<5>[540624.529124] UBI: max. allowed volumes:       128
<5>[540624.533874] UBI: wear-leveling threshold:    4096
<5>[540624.538704] UBI: number of internal volumes: 1
<5>[540624.543248] UBI: number of user volumes:     1
<5>[540624.547788] UBI: available PEBs:             0
<5>[540624.552341] UBI: total number of reserved PEBs: 120
<5>[540624.557319] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[540624.563437] UBI: max/mean erase counter: 6/4
<5>[540624.567805] UBI: image sequence number:  1872325126
<5>[540624.572817] UBI: background thread "ubi_bgt2d" started, PID 9107
<5>[540624.694587] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[540624.700730] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[540624.708412] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[540624.715841] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[540624.721787] UBIFS: default compressor: lzo
<5>[540624.725981] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[540624.930195] UBIFS: un-mount UBI device 2, volume 0
<5>[540624.998535] UBI: mtd6 is detached from ubi2
<5>[562224.431058] UBI: attaching mtd6 to ubi2
<5>[562224.435017] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[562224.441441] UBI: logical eraseblock size:    126976 bytes
<5>[562224.446955] UBI: smallest flash I/O unit:    2048
<5>[562224.451776] UBI: VID header offset:          2048 (aligned 2048)
<5>[562224.457884] UBI: data offset:                4096
<5>[562224.565928] UBI: max. sequence number:       474
<5>[562224.581350] UBI: attached mtd6 to ubi2
<5>[562224.585206] UBI: MTD device name:            "config"
<5>[562224.590395] UBI: MTD device size:            15 MiB
<5>[562224.595372] UBI: number of good PEBs:        120
<5>[562224.600102] UBI: number of bad PEBs:         0
<5>[562224.604644] UBI: number of corrupted PEBs:   0
<5>[562224.609195] UBI: max. allowed volumes:       128
<5>[562224.613912] UBI: wear-leveling threshold:    4096
<5>[562224.618723] UBI: number of internal volumes: 1
<5>[562224.623264] UBI: number of user volumes:     1
<5>[562224.627804] UBI: available PEBs:             0
<5>[562224.632356] UBI: total number of reserved PEBs: 120
<5>[562224.637334] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[562224.643452] UBI: max/mean erase counter: 6/4
<5>[562224.647820] UBI: image sequence number:  1872325126
<5>[562224.652833] UBI: background thread "ubi_bgt2d" started, PID 9809
<5>[562224.773961] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[562224.780100] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[562224.787781] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[562224.795210] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[562224.801154] UBIFS: default compressor: lzo
<5>[562224.805348] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[562225.006962] UBIFS: un-mount UBI device 2, volume 0
<5>[562225.079066] UBI: mtd6 is detached from ubi2
<5>[583824.503878] UBI: attaching mtd6 to ubi2
<5>[583824.507824] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[583824.514258] UBI: logical eraseblock size:    126976 bytes
<5>[583824.519794] UBI: smallest flash I/O unit:    2048
<5>[583824.524605] UBI: VID header offset:          2048 (aligned 2048)
<5>[583824.530741] UBI: data offset:                4096
<5>[583824.638578] UBI: max. sequence number:       475
<5>[583824.653967] UBI: attached mtd6 to ubi2
<5>[583824.657823] UBI: MTD device name:            "config"
<5>[583824.663013] UBI: MTD device size:            15 MiB
<5>[583824.667990] UBI: number of good PEBs:        120
<5>[583824.672723] UBI: number of bad PEBs:         0
<5>[583824.677266] UBI: number of corrupted PEBs:   0
<5>[583824.681817] UBI: max. allowed volumes:       128
<5>[583824.686533] UBI: wear-leveling threshold:    4096
<5>[583824.691343] UBI: number of internal volumes: 1
<5>[583824.695885] UBI: number of user volumes:     1
<5>[583824.700437] UBI: available PEBs:             0
<5>[583824.704978] UBI: total number of reserved PEBs: 120
<5>[583824.709964] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[583824.716075] UBI: max/mean erase counter: 6/4
<5>[583824.720451] UBI: image sequence number:  1872325126
<5>[583824.725441] UBI: background thread "ubi_bgt2d" started, PID 10671
<5>[583824.848179] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[583824.854326] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[583824.862021] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[583824.869447] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[583824.875382] UBIFS: default compressor: lzo
<5>[583824.879583] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[583825.085771] UBIFS: un-mount UBI device 2, volume 0
<5>[583825.134946] UBI: mtd6 is detached from ubi2
<5>[605424.576349] UBI: attaching mtd6 to ubi2
<5>[605424.580328] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[605424.586710] UBI: logical eraseblock size:    126976 bytes
<5>[605424.592225] UBI: smallest flash I/O unit:    2048
<5>[605424.597029] UBI: VID header offset:          2048 (aligned 2048)
<5>[605424.603148] UBI: data offset:                4096
<5>[605424.710921] UBI: max. sequence number:       476
<5>[605424.726330] UBI: attached mtd6 to ubi2
<5>[605424.730216] UBI: MTD device name:            "config"
<5>[605424.735377] UBI: MTD device size:            15 MiB
<5>[605424.740382] UBI: number of good PEBs:        120
<5>[605424.745113] UBI: number of bad PEBs:         0
<5>[605424.749683] UBI: number of corrupted PEBs:   0
<5>[605424.754226] UBI: max. allowed volumes:       128
<5>[605424.758949] UBI: wear-leveling threshold:    4096
<5>[605424.763752] UBI: number of internal volumes: 1
<5>[605424.768292] UBI: number of user volumes:     1
<5>[605424.772839] UBI: available PEBs:             0
<5>[605424.777380] UBI: total number of reserved PEBs: 120
<5>[605424.782364] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[605424.788473] UBI: max/mean erase counter: 6/4
<5>[605424.792849] UBI: image sequence number:  1872325126
<5>[605424.797842] UBI: background thread "ubi_bgt2d" started, PID 11980
<5>[605424.917427] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[605424.923567] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[605424.931258] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[605424.938683] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[605424.944617] UBIFS: default compressor: lzo
<5>[605424.948819] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[605425.154980] UBIFS: un-mount UBI device 2, volume 0
<5>[605425.224817] UBI: mtd6 is detached from ubi2
<5>[627024.646771] UBI: attaching mtd6 to ubi2
<5>[627024.650709] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[627024.657113] UBI: logical eraseblock size:    126976 bytes
<5>[627024.662612] UBI: smallest flash I/O unit:    2048
<5>[627024.667434] UBI: VID header offset:          2048 (aligned 2048)
<5>[627024.673544] UBI: data offset:                4096
<5>[627024.786770] UBI: max. sequence number:       477
<5>[627024.803454] UBI: attached mtd6 to ubi2
<5>[627024.807356] UBI: MTD device name:            "config"
<5>[627024.812515] UBI: MTD device size:            15 MiB
<5>[627024.817512] UBI: number of good PEBs:        120
<5>[627024.822228] UBI: number of bad PEBs:         0
<5>[627024.826779] UBI: number of corrupted PEBs:   0
<5>[627024.831320] UBI: max. allowed volumes:       128
<5>[627024.836043] UBI: wear-leveling threshold:    4096
<5>[627024.840845] UBI: number of internal volumes: 1
<5>[627024.845396] UBI: number of user volumes:     1
<5>[627024.849937] UBI: available PEBs:             0
<5>[627024.854478] UBI: total number of reserved PEBs: 120
<5>[627024.859488] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[627024.865620] UBI: max/mean erase counter: 6/4
<5>[627024.869992] UBI: image sequence number:  1872325126
<5>[627024.875060] UBI: background thread "ubi_bgt2d" started, PID 13238
<5>[627024.996430] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[627025.002545] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[627025.010246] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[627025.017680] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[627025.023615] UBIFS: default compressor: lzo
<5>[627025.027819] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[627025.229850] UBIFS: un-mount UBI device 2, volume 0
<5>[627025.285348] UBI: mtd6 is detached from ubi2
<5>[648624.722697] UBI: attaching mtd6 to ubi2
<5>[648624.726688] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[648624.733060] UBI: logical eraseblock size:    126976 bytes
<5>[648624.738572] UBI: smallest flash I/O unit:    2048
<5>[648624.743375] UBI: VID header offset:          2048 (aligned 2048)
<5>[648624.749495] UBI: data offset:                4096
<5>[648624.857445] UBI: max. sequence number:       478
<5>[648624.872822] UBI: attached mtd6 to ubi2
<5>[648624.876705] UBI: MTD device name:            "config"
<5>[648624.881860] UBI: MTD device size:            15 MiB
<5>[648624.886846] UBI: number of good PEBs:        120
<5>[648624.891562] UBI: number of bad PEBs:         0
<5>[648624.896115] UBI: number of corrupted PEBs:   0
<5>[648624.900661] UBI: max. allowed volumes:       128
<5>[648624.905391] UBI: wear-leveling threshold:    4096
<5>[648624.910194] UBI: number of internal volumes: 1
<5>[648624.914734] UBI: number of user volumes:     1
<5>[648624.919283] UBI: available PEBs:             0
<5>[648624.923825] UBI: total number of reserved PEBs: 120
<5>[648624.928818] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[648624.934930] UBI: max/mean erase counter: 6/4
<5>[648624.939307] UBI: image sequence number:  1872325126
<5>[648624.944298] UBI: background thread "ubi_bgt2d" started, PID 14059
<5>[648625.069386] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[648625.075534] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[648625.083220] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[648625.090652] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[648625.096598] UBIFS: default compressor: lzo
<5>[648625.100794] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[648625.302177] UBIFS: un-mount UBI device 2, volume 0
<5>[648625.355330] UBI: mtd6 is detached from ubi2
<5>[670224.800906] UBI: attaching mtd6 to ubi2
<5>[670224.804860] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[670224.811273] UBI: logical eraseblock size:    126976 bytes
<5>[670224.816807] UBI: smallest flash I/O unit:    2048
<5>[670224.821622] UBI: VID header offset:          2048 (aligned 2048)
<5>[670224.827768] UBI: data offset:                4096
<5>[670224.935556] UBI: max. sequence number:       479
<5>[670224.950958] UBI: attached mtd6 to ubi2
<5>[670224.954814] UBI: MTD device name:            "config"
<5>[670224.959990] UBI: MTD device size:            15 MiB
<5>[670224.964968] UBI: number of good PEBs:        120
<5>[670224.969700] UBI: number of bad PEBs:         0
<5>[670224.974241] UBI: number of corrupted PEBs:   0
<5>[670224.978791] UBI: max. allowed volumes:       128
<5>[670224.983507] UBI: wear-leveling threshold:    4096
<5>[670224.988317] UBI: number of internal volumes: 1
<5>[670224.992858] UBI: number of user volumes:     1
<5>[670224.997416] UBI: available PEBs:             0
<5>[670225.001958] UBI: total number of reserved PEBs: 120
<5>[670225.006945] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[670225.013055] UBI: max/mean erase counter: 6/4
<5>[670225.017429] UBI: image sequence number:  1872325126
<5>[670225.022421] UBI: background thread "ubi_bgt2d" started, PID 14886
<5>[670225.146956] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[670225.153081] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[670225.160791] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[670225.168228] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[670225.174164] UBIFS: default compressor: lzo
<5>[670225.178369] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[670225.379220] UBIFS: un-mount UBI device 2, volume 0
<5>[670225.455723] UBI: mtd6 is detached from ubi2
<5>[691824.927453] UBI: attaching mtd6 to ubi2
<5>[691824.931401] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[691824.937822] UBI: logical eraseblock size:    126976 bytes
<5>[691824.943341] UBI: smallest flash I/O unit:    2048
<5>[691824.948158] UBI: VID header offset:          2048 (aligned 2048)
<5>[691824.954340] UBI: data offset:                4096
<5>[691825.062645] UBI: max. sequence number:       480
<5>[691825.078079] UBI: attached mtd6 to ubi2
<5>[691825.081935] UBI: MTD device name:            "config"
<5>[691825.087122] UBI: MTD device size:            15 MiB
<5>[691825.092099] UBI: number of good PEBs:        120
<5>[691825.096900] UBI: number of bad PEBs:         0
<5>[691825.101498] UBI: number of corrupted PEBs:   0
<5>[691825.106162] UBI: max. allowed volumes:       128
<5>[691825.110922] UBI: wear-leveling threshold:    4096
<5>[691825.115823] UBI: number of internal volumes: 1
<5>[691825.120370] UBI: number of user volumes:     1
<5>[691825.124912] UBI: available PEBs:             0
<5>[691825.129467] UBI: total number of reserved PEBs: 120
<5>[691825.134445] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[691825.140562] UBI: max/mean erase counter: 6/4
<5>[691825.144930] UBI: image sequence number:  1872325126
<5>[691825.149997] UBI: background thread "ubi_bgt2d" started, PID 6490
<5>[691825.270898] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[691825.277045] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[691825.284738] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[691825.292176] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[691825.298124] UBIFS: default compressor: lzo
<5>[691825.302318] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[691825.534407] UBIFS: un-mount UBI device 2, volume 0
<5>[691825.601826] UBI: mtd6 is detached from ubi2
<6>[694853.855199] PHY: comcerto-0:06 - Link is Down
<6>[694855.855204] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[694861.855203] PHY: comcerto-0:06 - Link is Down
<6>[694862.855211] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[694972.855196] PHY: comcerto-0:06 - Link is Down
<6>[694974.855201] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[695582.865200] PHY: comcerto-0:06 - Link is Down
<6>[695586.865220] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[695598.865194] PHY: comcerto-0:06 - Link is Down
<6>[695605.916821] eth0: pfe_eth_close
<6>[695605.955018] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[695605.964546] hif_process_client_req: unregister client_id 1
<6>[695605.970147] pfe_hif_client_unregister
<6>[695606.007444] eth0: pfe_eth_open
<6>[695606.010718] hif_process_client_req: register client_id 1
<6>[695606.016159] pfe_hif_client_register
<6>[695606.019752] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[695606.028143] eth0: pfe_gemac_init
<6>[695606.032081] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[695630.025211] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[695630.030722] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[699980.045199] PHY: comcerto-0:06 - Link is Down
<6>[699982.045237] PHY: comcerto-0:06 - Link is Up - 1000/Full
<5>[713352.986234] UBI: attaching mtd6 to ubi2
<5>[713352.990174] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[713352.996591] UBI: logical eraseblock size:    126976 bytes
<5>[713353.002092] UBI: smallest flash I/O unit:    2048
<5>[713353.006912] UBI: VID header offset:          2048 (aligned 2048)
<5>[713353.013021] UBI: data offset:                4096
<5>[713353.120802] UBI: max. sequence number:       481
<5>[713353.136281] UBI: attached mtd6 to ubi2
<5>[713353.140136] UBI: MTD device name:            "config"
<5>[713353.145306] UBI: MTD device size:            15 MiB
<5>[713353.150290] UBI: number of good PEBs:        120
<5>[713353.155013] UBI: number of bad PEBs:         0
<5>[713353.159554] UBI: number of corrupted PEBs:   0
<5>[713353.164094] UBI: max. allowed volumes:       128
<5>[713353.168814] UBI: wear-leveling threshold:    4096
<5>[713353.173617] UBI: number of internal volumes: 1
<5>[713353.178172] UBI: number of user volumes:     1
<5>[713353.182713] UBI: available PEBs:             0
<5>[713353.187259] UBI: total number of reserved PEBs: 120
<5>[713353.192236] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[713353.198349] UBI: max/mean erase counter: 6/4
<5>[713353.202717] UBI: image sequence number:  1872325126
<5>[713353.207713] UBI: background thread "ubi_bgt2d" started, PID 13281
<5>[713353.326153] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[713353.332278] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[713353.339984] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[713353.347411] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[713353.353348] UBIFS: default compressor: lzo
<5>[713353.357552] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[713353.561221] UBIFS: un-mount UBI device 2, volume 0
<5>[713353.631345] UBI: mtd6 is detached from ubi2
<5>[734949.223797] UBI: attaching mtd6 to ubi2
<5>[734949.227777] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[734949.234148] UBI: logical eraseblock size:    126976 bytes
<5>[734949.239675] UBI: smallest flash I/O unit:    2048
<5>[734949.244488] UBI: VID header offset:          2048 (aligned 2048)
<5>[734949.250656] UBI: data offset:                4096
<5>[734949.359126] UBI: max. sequence number:       482
<5>[734949.374489] UBI: attached mtd6 to ubi2
<5>[734949.378394] UBI: MTD device name:            "config"
<5>[734949.383550] UBI: MTD device size:            15 MiB
<5>[734949.388538] UBI: number of good PEBs:        120
<5>[734949.393255] UBI: number of bad PEBs:         0
<5>[734949.397803] UBI: number of corrupted PEBs:   0
<5>[734949.402345] UBI: max. allowed volumes:       128
<5>[734949.407067] UBI: wear-leveling threshold:    4096
<5>[734949.411869] UBI: number of internal volumes: 1
<5>[734949.416419] UBI: number of user volumes:     1
<5>[734949.420960] UBI: available PEBs:             0
<5>[734949.425509] UBI: total number of reserved PEBs: 120
<5>[734949.430487] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[734949.436606] UBI: max/mean erase counter: 6/4
<5>[734949.440973] UBI: image sequence number:  1872325126
<5>[734949.445987] UBI: background thread "ubi_bgt2d" started, PID 14286
<5>[734949.566827] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[734949.572945] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[734949.580644] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[734949.588078] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[734949.594014] UBIFS: default compressor: lzo
<5>[734949.598216] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[734949.801715] UBIFS: un-mount UBI device 2, volume 0
<5>[734949.881283] UBI: mtd6 is detached from ubi2
<5>[756549.284067] UBI: attaching mtd6 to ubi2
<5>[756549.288058] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[756549.294430] UBI: logical eraseblock size:    126976 bytes
<5>[756549.299955] UBI: smallest flash I/O unit:    2048
<5>[756549.304760] UBI: VID header offset:          2048 (aligned 2048)
<5>[756549.310885] UBI: data offset:                4096
<5>[756549.419007] UBI: max. sequence number:       483
<5>[756549.434478] UBI: attached mtd6 to ubi2
<5>[756549.438399] UBI: MTD device name:            "config"
<5>[756549.443553] UBI: MTD device size:            15 MiB
<5>[756549.448546] UBI: number of good PEBs:        120
<5>[756549.453262] UBI: number of bad PEBs:         0
<5>[756549.457813] UBI: number of corrupted PEBs:   0
<5>[756549.462366] UBI: max. allowed volumes:       128
<5>[756549.467089] UBI: wear-leveling threshold:    4096
<5>[756549.471891] UBI: number of internal volumes: 1
<5>[756549.476437] UBI: number of user volumes:     1
<5>[756549.480978] UBI: available PEBs:             0
<5>[756549.485526] UBI: total number of reserved PEBs: 120
<5>[756549.490503] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[756549.496623] UBI: max/mean erase counter: 6/4
<5>[756549.500991] UBI: image sequence number:  1872325126
<5>[756549.505984] UBI: background thread "ubi_bgt2d" started, PID 14884
<5>[756549.626685] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[756549.632803] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[756549.640504] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[756549.647935] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[756549.653870] UBIFS: default compressor: lzo
<5>[756549.658074] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[756549.863615] UBIFS: un-mount UBI device 2, volume 0
<5>[756549.923295] UBI: mtd6 is detached from ubi2
<5>[778149.348690] UBI: attaching mtd6 to ubi2
<5>[778149.352631] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[778149.359063] UBI: logical eraseblock size:    126976 bytes
<5>[778149.364572] UBI: smallest flash I/O unit:    2048
<5>[778149.369399] UBI: VID header offset:          2048 (aligned 2048)
<5>[778149.375519] UBI: data offset:                4096
<5>[778149.483347] UBI: max. sequence number:       484
<5>[778149.498733] UBI: attached mtd6 to ubi2
<5>[778149.502588] UBI: MTD device name:            "config"
<5>[778149.507776] UBI: MTD device size:            15 MiB
<5>[778149.512755] UBI: number of good PEBs:        120
<5>[778149.517483] UBI: number of bad PEBs:         0
<5>[778149.522025] UBI: number of corrupted PEBs:   0
<5>[778149.526579] UBI: max. allowed volumes:       128
<5>[778149.531297] UBI: wear-leveling threshold:    4096
<5>[778149.536109] UBI: number of internal volumes: 1
<5>[778149.540651] UBI: number of user volumes:     1
<5>[778149.545202] UBI: available PEBs:             0
<5>[778149.549744] UBI: total number of reserved PEBs: 120
<5>[778149.554720] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[778149.560837] UBI: max/mean erase counter: 6/4
<5>[778149.565230] UBI: image sequence number:  1872325126
<5>[778149.570220] UBI: background thread "ubi_bgt2d" started, PID 15990
<5>[778149.689474] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[778149.695611] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[778149.703291] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[778149.710722] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[778149.716673] UBIFS: default compressor: lzo
<5>[778149.720868] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[778149.924796] UBIFS: un-mount UBI device 2, volume 0
<5>[778149.991219] UBI: mtd6 is detached from ubi2
<5>[799753.672754] UBI: attaching mtd6 to ubi2
<5>[799753.676747] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[799753.683128] UBI: logical eraseblock size:    126976 bytes
<5>[799753.688647] UBI: smallest flash I/O unit:    2048
<5>[799753.693451] UBI: VID header offset:          2048 (aligned 2048)
<5>[799753.699569] UBI: data offset:                4096
<5>[799753.807357] UBI: max. sequence number:       485
<5>[799753.822715] UBI: attached mtd6 to ubi2
<5>[799753.826609] UBI: MTD device name:            "config"
<5>[799753.831762] UBI: MTD device size:            15 MiB
<5>[799753.836750] UBI: number of good PEBs:        120
<5>[799753.841467] UBI: number of bad PEBs:         0
<5>[799753.846018] UBI: number of corrupted PEBs:   0
<5>[799753.850559] UBI: max. allowed volumes:       128
<5>[799753.855283] UBI: wear-leveling threshold:    4096
<5>[799753.860085] UBI: number of internal volumes: 1
<5>[799753.864626] UBI: number of user volumes:     1
<5>[799753.869176] UBI: available PEBs:             0
<5>[799753.873718] UBI: total number of reserved PEBs: 120
<5>[799753.878702] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[799753.884811] UBI: max/mean erase counter: 6/4
<5>[799753.889188] UBI: image sequence number:  1872325126
<5>[799753.894181] UBI: background thread "ubi_bgt2d" started, PID 16825
<5>[799754.013255] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[799754.019394] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[799754.027087] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[799754.034503] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[799754.040448] UBIFS: default compressor: lzo
<5>[799754.044642] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[799754.249388] UBIFS: un-mount UBI device 2, volume 0
<5>[799754.311251] UBI: mtd6 is detached from ubi2
<5>[821349.495337] UBI: attaching mtd6 to ubi2
<5>[821349.499299] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[821349.505717] UBI: logical eraseblock size:    126976 bytes
<5>[821349.511225] UBI: smallest flash I/O unit:    2048
<5>[821349.516071] UBI: VID header offset:          2048 (aligned 2048)
<5>[821349.522271] UBI: data offset:                4096
<5>[821349.631941] UBI: max. sequence number:       486
<5>[821349.647338] UBI: attached mtd6 to ubi2
<5>[821349.651198] UBI: MTD device name:            "config"
<5>[821349.656380] UBI: MTD device size:            15 MiB
<5>[821349.661358] UBI: number of good PEBs:        120
<5>[821349.666083] UBI: number of bad PEBs:         0
<5>[821349.670624] UBI: number of corrupted PEBs:   0
<5>[821349.675174] UBI: max. allowed volumes:       128
<5>[821349.679889] UBI: wear-leveling threshold:    4096
<5>[821349.684691] UBI: number of internal volumes: 1
<5>[821349.689239] UBI: number of user volumes:     1
<5>[821349.693781] UBI: available PEBs:             0
<5>[821349.698329] UBI: total number of reserved PEBs: 120
<5>[821349.703306] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[821349.709421] UBI: max/mean erase counter: 6/4
<5>[821349.713788] UBI: image sequence number:  1872325126
<5>[821349.718798] UBI: background thread "ubi_bgt2d" started, PID 17757
<5>[821349.839827] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[821349.845966] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[821349.853646] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[821349.861074] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[821349.867018] UBIFS: default compressor: lzo
<5>[821349.871213] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[821350.079575] UBIFS: un-mount UBI device 2, volume 0
<5>[821350.154921] UBI: mtd6 is detached from ubi2
<5>[842949.567532] UBI: attaching mtd6 to ubi2
<5>[842949.571485] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[842949.577875] UBI: logical eraseblock size:    126976 bytes
<5>[842949.583375] UBI: smallest flash I/O unit:    2048
<5>[842949.588195] UBI: VID header offset:          2048 (aligned 2048)
<5>[842949.594305] UBI: data offset:                4096
<5>[842949.702369] UBI: max. sequence number:       487
<5>[842949.717785] UBI: attached mtd6 to ubi2
<5>[842949.721641] UBI: MTD device name:            "config"
<5>[842949.726816] UBI: MTD device size:            15 MiB
<5>[842949.731795] UBI: number of good PEBs:        120
<5>[842949.736524] UBI: number of bad PEBs:         0
<5>[842949.741069] UBI: number of corrupted PEBs:   0
<5>[842949.745630] UBI: max. allowed volumes:       128
<5>[842949.750345] UBI: wear-leveling threshold:    4096
<5>[842949.755155] UBI: number of internal volumes: 1
<5>[842949.759696] UBI: number of user volumes:     1
<5>[842949.764236] UBI: available PEBs:             0
<5>[842949.768786] UBI: total number of reserved PEBs: 120
<5>[842949.773764] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[842949.779879] UBI: max/mean erase counter: 6/4
<5>[842949.784248] UBI: image sequence number:  1872325126
<5>[842949.789257] UBI: background thread "ubi_bgt2d" started, PID 18387
<5>[842949.909627] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[842949.915768] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[842949.923449] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[842949.930878] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[842949.936824] UBIFS: default compressor: lzo
<5>[842949.941094] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[842950.147843] UBIFS: un-mount UBI device 2, volume 0
<5>[842950.205489] UBI: mtd6 is detached from ubi2
<5>[864549.670307] UBI: attaching mtd6 to ubi2
<5>[864549.674270] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[864549.680680] UBI: logical eraseblock size:    126976 bytes
<5>[864549.686203] UBI: smallest flash I/O unit:    2048
<5>[864549.691007] UBI: VID header offset:          2048 (aligned 2048)
<5>[864549.697127] UBI: data offset:                4096
<5>[864549.804994] UBI: max. sequence number:       488
<5>[864549.820410] UBI: attached mtd6 to ubi2
<5>[864549.824263] UBI: MTD device name:            "config"
<5>[864549.829441] UBI: MTD device size:            15 MiB
<5>[864549.834419] UBI: number of good PEBs:        120
<5>[864549.839145] UBI: number of bad PEBs:         0
<5>[864549.843687] UBI: number of corrupted PEBs:   0
<5>[864549.848241] UBI: max. allowed volumes:       128
<5>[864549.852960] UBI: wear-leveling threshold:    4096
<5>[864549.857775] UBI: number of internal volumes: 1
<5>[864549.862316] UBI: number of user volumes:     1
<5>[864549.866864] UBI: available PEBs:             0
<5>[864549.871405] UBI: total number of reserved PEBs: 120
<5>[864549.876388] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[864549.882497] UBI: max/mean erase counter: 6/4
<5>[864549.886874] UBI: image sequence number:  1872325126
<5>[864549.891869] UBI: background thread "ubi_bgt2d" started, PID 19718
<5>[864550.015865] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[864550.021982] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[864550.029684] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[864550.037115] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[864550.043050] UBIFS: default compressor: lzo
<5>[864550.047255] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[864550.262571] UBIFS: un-mount UBI device 2, volume 0
<5>[864550.311275] UBI: mtd6 is detached from ubi2
<5>[886149.728198] UBI: attaching mtd6 to ubi2
<5>[886149.732150] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[886149.738569] UBI: logical eraseblock size:    126976 bytes
<5>[886149.744077] UBI: smallest flash I/O unit:    2048
<5>[886149.748899] UBI: VID header offset:          2048 (aligned 2048)
<5>[886149.755028] UBI: data offset:                4096
<5>[886149.863273] UBI: max. sequence number:       489
<5>[886149.878708] UBI: attached mtd6 to ubi2
<5>[886149.882562] UBI: MTD device name:            "config"
<5>[886149.887754] UBI: MTD device size:            15 MiB
<5>[886149.892734] UBI: number of good PEBs:        120
<5>[886149.897475] UBI: number of bad PEBs:         0
<5>[886149.902020] UBI: number of corrupted PEBs:   0
<5>[886149.906580] UBI: max. allowed volumes:       128
<5>[886149.911295] UBI: wear-leveling threshold:    4096
<5>[886149.916108] UBI: number of internal volumes: 1
<5>[886149.920649] UBI: number of user volumes:     1
<5>[886149.925209] UBI: available PEBs:             0
<5>[886149.929752] UBI: total number of reserved PEBs: 120
<5>[886149.934728] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[886149.940846] UBI: max/mean erase counter: 6/4
<5>[886149.945220] UBI: image sequence number:  1872325126
<5>[886149.950210] UBI: background thread "ubi_bgt2d" started, PID 21160
<5>[886150.077877] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[886150.083993] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[886150.091694] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[886150.099125] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[886150.105071] UBIFS: default compressor: lzo
<5>[886150.109266] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[886150.313256] UBIFS: un-mount UBI device 2, volume 0
<5>[886150.355495] UBI: mtd6 is detached from ubi2
<5>[907749.802638] UBI: attaching mtd6 to ubi2
<5>[907749.806622] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[907749.813000] UBI: logical eraseblock size:    126976 bytes
<5>[907749.818512] UBI: smallest flash I/O unit:    2048
<5>[907749.823316] UBI: VID header offset:          2048 (aligned 2048)
<5>[907749.829441] UBI: data offset:                4096
<5>[907749.937297] UBI: max. sequence number:       490
<5>[907749.952663] UBI: attached mtd6 to ubi2
<5>[907749.956569] UBI: MTD device name:            "config"
<5>[907749.961724] UBI: MTD device size:            15 MiB
<5>[907749.966720] UBI: number of good PEBs:        120
<5>[907749.971437] UBI: number of bad PEBs:         0
<5>[907749.975989] UBI: number of corrupted PEBs:   0
<5>[907749.980532] UBI: max. allowed volumes:       128
<5>[907749.985257] UBI: wear-leveling threshold:    4096
<5>[907749.990061] UBI: number of internal volumes: 1
<5>[907749.994601] UBI: number of user volumes:     1
<5>[907749.999157] UBI: available PEBs:             0
<5>[907750.003698] UBI: total number of reserved PEBs: 120
<5>[907750.008685] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[907750.014794] UBI: max/mean erase counter: 6/4
<5>[907750.019171] UBI: image sequence number:  1872325126
<5>[907750.024161] UBI: background thread "ubi_bgt2d" started, PID 21723
<5>[907750.148290] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[907750.154407] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[907750.162105] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[907750.169536] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[907750.175483] UBIFS: default compressor: lzo
<5>[907750.179677] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[907750.383247] UBIFS: un-mount UBI device 2, volume 0
<5>[907750.431221] UBI: mtd6 is detached from ubi2
<5>[929349.863761] UBI: attaching mtd6 to ubi2
<5>[929349.867846] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[929349.874269] UBI: logical eraseblock size:    126976 bytes
<5>[929349.879791] UBI: smallest flash I/O unit:    2048
<5>[929349.884597] UBI: VID header offset:          2048 (aligned 2048)
<5>[929349.890718] UBI: data offset:                4096
<5>[929349.998864] UBI: max. sequence number:       491
<5>[929350.014251] UBI: attached mtd6 to ubi2
<5>[929350.018167] UBI: MTD device name:            "config"
<5>[929350.023323] UBI: MTD device size:            15 MiB
<5>[929350.028315] UBI: number of good PEBs:        120
<5>[929350.033032] UBI: number of bad PEBs:         0
<5>[929350.037586] UBI: number of corrupted PEBs:   0
<5>[929350.042128] UBI: max. allowed volumes:       128
<5>[929350.046856] UBI: wear-leveling threshold:    4096
<5>[929350.051659] UBI: number of internal volumes: 1
<5>[929350.056216] UBI: number of user volumes:     1
<5>[929350.060761] UBI: available PEBs:             0
<5>[929350.065322] UBI: total number of reserved PEBs: 120
<5>[929350.070300] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[929350.076419] UBI: max/mean erase counter: 6/5
<5>[929350.080787] UBI: image sequence number:  1872325126
<5>[929350.085806] UBI: background thread "ubi_bgt2d" started, PID 22714
<5>[929350.206370] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[929350.212487] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[929350.220185] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[929350.227614] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[929350.233549] UBIFS: default compressor: lzo
<5>[929350.237751] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[929350.442095] UBIFS: un-mount UBI device 2, volume 0
<5>[929350.517948] UBI: mtd6 is detached from ubi2
<5>[950949.936891] UBI: attaching mtd6 to ubi2
<5>[950949.940831] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[950949.947240] UBI: logical eraseblock size:    126976 bytes
<5>[950949.952741] UBI: smallest flash I/O unit:    2048
<5>[950949.957555] UBI: VID header offset:          2048 (aligned 2048)
<5>[950949.963738] UBI: data offset:                4096
<5>[950950.071794] UBI: max. sequence number:       495
<5>[950950.087224] UBI: attached mtd6 to ubi2
<5>[950950.091079] UBI: MTD device name:            "config"
<5>[950950.096269] UBI: MTD device size:            15 MiB
<5>[950950.101247] UBI: number of good PEBs:        120
<5>[950950.105974] UBI: number of bad PEBs:         0
<5>[950950.110517] UBI: number of corrupted PEBs:   0
<5>[950950.115069] UBI: max. allowed volumes:       128
<5>[950950.119786] UBI: wear-leveling threshold:    4096
<5>[950950.124588] UBI: number of internal volumes: 1
<5>[950950.129139] UBI: number of user volumes:     1
<5>[950950.133681] UBI: available PEBs:             0
<5>[950950.138234] UBI: total number of reserved PEBs: 120
<5>[950950.143212] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[950950.149330] UBI: max/mean erase counter: 6/5
<5>[950950.153703] UBI: image sequence number:  1872325126
<5>[950950.158746] UBI: background thread "ubi_bgt2d" started, PID 24853
<5>[950950.284156] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[950950.290302] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[950950.297993] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[950950.305417] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[950950.311352] UBIFS: default compressor: lzo
<5>[950950.315556] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[950950.534412] UBIFS: un-mount UBI device 2, volume 0
<5>[950950.595176] UBI: mtd6 is detached from ubi2
<5>[972550.010312] UBI: attaching mtd6 to ubi2
<5>[972550.014252] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[972550.020674] UBI: logical eraseblock size:    126976 bytes
<5>[972550.026192] UBI: smallest flash I/O unit:    2048
<5>[972550.031026] UBI: VID header offset:          2048 (aligned 2048)
<5>[972550.037179] UBI: data offset:                4096
<5>[972550.145598] UBI: max. sequence number:       496
<5>[972550.161011] UBI: attached mtd6 to ubi2
<5>[972550.164879] UBI: MTD device name:            "config"
<5>[972550.170055] UBI: MTD device size:            15 MiB
<5>[972550.175042] UBI: number of good PEBs:        120
<5>[972550.179758] UBI: number of bad PEBs:         0
<5>[972550.184298] UBI: number of corrupted PEBs:   0
<5>[972550.188847] UBI: max. allowed volumes:       128
<5>[972550.193562] UBI: wear-leveling threshold:    4096
<5>[972550.198371] UBI: number of internal volumes: 1
<5>[972550.202914] UBI: number of user volumes:     1
<5>[972550.207465] UBI: available PEBs:             0
<5>[972550.212052] UBI: total number of reserved PEBs: 120
<5>[972550.217045] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[972550.223155] UBI: max/mean erase counter: 6/5
<5>[972550.227533] UBI: image sequence number:  1872325126
<5>[972550.232523] UBI: background thread "ubi_bgt2d" started, PID 28301
<5>[972550.352283] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[972550.358426] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[972550.366125] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[972550.373542] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[972550.379513] UBIFS: default compressor: lzo
<5>[972550.383708] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[972550.590367] UBIFS: un-mount UBI device 2, volume 0
<5>[972550.641353] UBI: mtd6 is detached from ubi2
<5>[994150.086838] UBI: attaching mtd6 to ubi2
<5>[994150.090776] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[994150.097191] UBI: logical eraseblock size:    126976 bytes
<5>[994150.102692] UBI: smallest flash I/O unit:    2048
<5>[994150.107530] UBI: VID header offset:          2048 (aligned 2048)
<5>[994150.113639] UBI: data offset:                4096
<5>[994150.221506] UBI: max. sequence number:       497
<5>[994150.236882] UBI: attached mtd6 to ubi2
<5>[994150.240744] UBI: MTD device name:            "config"
<5>[994150.245934] UBI: MTD device size:            15 MiB
<5>[994150.250911] UBI: number of good PEBs:        120
<5>[994150.255647] UBI: number of bad PEBs:         0
<5>[994150.260193] UBI: number of corrupted PEBs:   0
<5>[994150.264743] UBI: max. allowed volumes:       128
<5>[994150.269480] UBI: wear-leveling threshold:    4096
<5>[994150.274286] UBI: number of internal volumes: 1
<5>[994150.278840] UBI: number of user volumes:     1
<5>[994150.283382] UBI: available PEBs:             0
<5>[994150.287933] UBI: total number of reserved PEBs: 120
<5>[994150.292910] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[994150.299026] UBI: max/mean erase counter: 6/5
<5>[994150.303393] UBI: image sequence number:  1872325126
<5>[994150.308406] UBI: background thread "ubi_bgt2d" started, PID 29337
<5>[994150.430980] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[994150.437119] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[994150.444807] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[994150.452258] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[994150.458209] UBIFS: default compressor: lzo
<5>[994150.462403] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[994150.667239] UBIFS: un-mount UBI device 2, volume 0
<5>[994150.735554] UBI: mtd6 is detached from ubi2
<5>[1015750.157601] UBI: attaching mtd6 to ubi2
<5>[1015750.161636] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1015750.168116] UBI: logical eraseblock size:    126976 bytes
<5>[1015750.173708] UBI: smallest flash I/O unit:    2048
<5>[1015750.178610] UBI: VID header offset:          2048 (aligned 2048)
<5>[1015750.184806] UBI: data offset:                4096
<5>[1015750.292900] UBI: max. sequence number:       498
<5>[1015750.308452] UBI: attached mtd6 to ubi2
<5>[1015750.312396] UBI: MTD device name:            "config"
<5>[1015750.317669] UBI: MTD device size:            15 MiB
<5>[1015750.322735] UBI: number of good PEBs:        120
<5>[1015750.327547] UBI: number of bad PEBs:         0
<5>[1015750.332176] UBI: number of corrupted PEBs:   0
<5>[1015750.336811] UBI: max. allowed volumes:       128
<5>[1015750.341613] UBI: wear-leveling threshold:    4096
<5>[1015750.346509] UBI: number of internal volumes: 1
<5>[1015750.351138] UBI: number of user volumes:     1
<5>[1015750.355773] UBI: available PEBs:             0
<5>[1015750.360402] UBI: total number of reserved PEBs: 120
<5>[1015750.365473] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1015750.371670] UBI: max/mean erase counter: 6/5
<5>[1015750.376130] UBI: image sequence number:  1872325126
<5>[1015750.381207] UBI: background thread "ubi_bgt2d" started, PID 30570
<5>[1015750.506740] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1015750.512944] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1015750.520732] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1015750.528248] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1015750.534270] UBIFS: default compressor: lzo
<5>[1015750.538561] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1015750.741234] UBIFS: un-mount UBI device 2, volume 0
<5>[1015750.814885] UBI: mtd6 is detached from ubi2
<5>[1034982.970815] rpc-srv/tcp: nfsd: sent only 132 when sending 32900 bytes - shutting down socket
<5>[1037350.236571] UBI: attaching mtd6 to ubi2
<5>[1037350.240598] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1037350.247095] UBI: logical eraseblock size:    126976 bytes
<5>[1037350.252687] UBI: smallest flash I/O unit:    2048
<5>[1037350.257596] UBI: VID header offset:          2048 (aligned 2048)
<5>[1037350.263792] UBI: data offset:                4096
<5>[1037350.371925] UBI: max. sequence number:       499
<5>[1037350.387408] UBI: attached mtd6 to ubi2
<5>[1037350.391349] UBI: MTD device name:            "config"
<5>[1037350.396627] UBI: MTD device size:            15 MiB
<5>[1037350.401694] UBI: number of good PEBs:        120
<5>[1037350.406507] UBI: number of bad PEBs:         0
<5>[1037350.411136] UBI: number of corrupted PEBs:   0
<5>[1037350.415773] UBI: max. allowed volumes:       128
<5>[1037350.420576] UBI: wear-leveling threshold:    4096
<5>[1037350.425478] UBI: number of internal volumes: 1
<5>[1037350.430109] UBI: number of user volumes:     1
<5>[1037350.434736] UBI: available PEBs:             0
<5>[1037350.439378] UBI: total number of reserved PEBs: 120
<5>[1037350.444448] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1037350.450672] UBI: max/mean erase counter: 6/5
<5>[1037350.455144] UBI: image sequence number:  1872325126
<5>[1037350.460220] UBI: background thread "ubi_bgt2d" started, PID 32668
<5>[1037350.578617] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1037350.584820] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1037350.592617] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1037350.600140] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1037350.606172] UBIFS: default compressor: lzo
<5>[1037350.610459] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1037350.837649] UBIFS: un-mount UBI device 2, volume 0
<5>[1037350.904874] UBI: mtd6 is detached from ubi2
<5>[1058950.309288] UBI: attaching mtd6 to ubi2
<5>[1058950.313331] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1058950.319824] UBI: logical eraseblock size:    126976 bytes
<5>[1058950.325427] UBI: smallest flash I/O unit:    2048
<5>[1058950.330318] UBI: VID header offset:          2048 (aligned 2048)
<5>[1058950.336525] UBI: data offset:                4096
<5>[1058950.444403] UBI: max. sequence number:       500
<5>[1058950.459914] UBI: attached mtd6 to ubi2
<5>[1058950.463857] UBI: MTD device name:            "config"
<5>[1058950.469125] UBI: MTD device size:            15 MiB
<5>[1058950.474189] UBI: number of good PEBs:        120
<5>[1058950.479002] UBI: number of bad PEBs:         0
<5>[1058950.483632] UBI: number of corrupted PEBs:   0
<5>[1058950.488268] UBI: max. allowed volumes:       128
<5>[1058950.493072] UBI: wear-leveling threshold:    4096
<5>[1058950.497973] UBI: number of internal volumes: 1
<5>[1058950.502608] UBI: number of user volumes:     1
<5>[1058950.507254] UBI: available PEBs:             0
<5>[1058950.511884] UBI: total number of reserved PEBs: 120
<5>[1058950.516957] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1058950.523154] UBI: max/mean erase counter: 6/5
<5>[1058950.527616] UBI: image sequence number:  1872325126
<5>[1058950.532693] UBI: background thread "ubi_bgt2d" started, PID 1485
<5>[1058950.652504] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1058950.658730] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1058950.666514] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1058950.674018] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1058950.680057] UBIFS: default compressor: lzo
<5>[1058950.684341] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1058950.895740] UBIFS: un-mount UBI device 2, volume 0
<5>[1058950.941310] UBI: mtd6 is detached from ubi2
<5>[1080550.380798] UBI: attaching mtd6 to ubi2
<5>[1080550.384824] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1080550.391342] UBI: logical eraseblock size:    126976 bytes
<5>[1080550.396955] UBI: smallest flash I/O unit:    2048
<5>[1080550.401846] UBI: VID header offset:          2048 (aligned 2048)
<5>[1080550.408049] UBI: data offset:                4096
<5>[1080550.516233] UBI: max. sequence number:       501
<5>[1080550.531698] UBI: attached mtd6 to ubi2
<5>[1080550.535670] UBI: MTD device name:            "config"
<5>[1080550.540911] UBI: MTD device size:            15 MiB
<5>[1080550.545987] UBI: number of good PEBs:        120
<5>[1080550.550790] UBI: number of bad PEBs:         0
<5>[1080550.555431] UBI: number of corrupted PEBs:   0
<5>[1080550.560061] UBI: max. allowed volumes:       128
<5>[1080550.564863] UBI: wear-leveling threshold:    4096
<5>[1080550.569760] UBI: number of internal volumes: 1
<5>[1080550.574390] UBI: number of user volumes:     1
<5>[1080550.579026] UBI: available PEBs:             0
<5>[1080550.583655] UBI: total number of reserved PEBs: 120
<5>[1080550.588727] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1080550.594922] UBI: max/mean erase counter: 6/5
<5>[1080550.599383] UBI: image sequence number:  1872325126
<5>[1080550.604463] UBI: background thread "ubi_bgt2d" started, PID 3422
<5>[1080550.730585] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1080550.736811] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1080550.744583] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1080550.752099] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1080550.758133] UBIFS: default compressor: lzo
<5>[1080550.762414] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1080550.965397] UBIFS: un-mount UBI device 2, volume 0
<5>[1080551.034852] UBI: mtd6 is detached from ubi2
<5>[1102150.453582] UBI: attaching mtd6 to ubi2
<5>[1102150.457656] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1102150.464120] UBI: logical eraseblock size:    126976 bytes
<5>[1102150.469722] UBI: smallest flash I/O unit:    2048
<5>[1102150.474614] UBI: VID header offset:          2048 (aligned 2048)
<5>[1102150.480819] UBI: data offset:                4096
<5>[1102150.588657] UBI: max. sequence number:       502
<5>[1102150.604145] UBI: attached mtd6 to ubi2
<5>[1102150.608120] UBI: MTD device name:            "config"
<5>[1102150.613361] UBI: MTD device size:            15 MiB
<5>[1102150.618437] UBI: number of good PEBs:        120
<5>[1102150.623241] UBI: number of bad PEBs:         0
<5>[1102150.627877] UBI: number of corrupted PEBs:   0
<5>[1102150.632506] UBI: max. allowed volumes:       128
<5>[1102150.637316] UBI: wear-leveling threshold:    4096
<5>[1102150.642205] UBI: number of internal volumes: 1
<5>[1102150.646841] UBI: number of user volumes:     1
<5>[1102150.651470] UBI: available PEBs:             0
<5>[1102150.656105] UBI: total number of reserved PEBs: 120
<5>[1102150.661169] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1102150.667380] UBI: max/mean erase counter: 6/5
<5>[1102150.671854] UBI: image sequence number:  1872325126
<5>[1102150.677024] UBI: background thread "ubi_bgt2d" started, PID 4301
<5>[1102150.802172] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1102150.808416] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1102150.816202] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1102150.823706] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1102150.829740] UBIFS: default compressor: lzo
<5>[1102150.834022] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1102151.036348] UBIFS: un-mount UBI device 2, volume 0
<5>[1102151.101516] UBI: mtd6 is detached from ubi2
<6>[1107152.005385] PHY: comcerto-0:06 - Link is Down
<6>[1107153.005390] PHY: comcerto-0:06 - Link is Up - 1000/Full
<5>[1123750.563282] UBI: attaching mtd6 to ubi2
<5>[1123750.567349] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1123750.573809] UBI: logical eraseblock size:    126976 bytes
<5>[1123750.579407] UBI: smallest flash I/O unit:    2048
<5>[1123750.584297] UBI: VID header offset:          2048 (aligned 2048)
<5>[1123750.590508] UBI: data offset:                4096
<5>[1123750.698706] UBI: max. sequence number:       503
<5>[1123750.714164] UBI: attached mtd6 to ubi2
<5>[1123750.718177] UBI: MTD device name:            "config"
<5>[1123750.723423] UBI: MTD device size:            15 MiB
<5>[1123750.728500] UBI: number of good PEBs:        120
<5>[1123750.733304] UBI: number of bad PEBs:         0
<5>[1123750.737941] UBI: number of corrupted PEBs:   0
<5>[1123750.742571] UBI: max. allowed volumes:       128
<5>[1123750.747385] UBI: wear-leveling threshold:    4096
<5>[1123750.752274] UBI: number of internal volumes: 1
<5>[1123750.756915] UBI: number of user volumes:     1
<5>[1123750.761543] UBI: available PEBs:             0
<5>[1123750.766184] UBI: total number of reserved PEBs: 120
<5>[1123750.771250] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1123750.777454] UBI: max/mean erase counter: 6/5
<5>[1123750.781910] UBI: image sequence number:  1872325126
<5>[1123750.787510] UBI: background thread "ubi_bgt2d" started, PID 5774
<5>[1123750.906250] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1123750.912460] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1123750.920265] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1123750.927789] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1123750.933812] UBIFS: default compressor: lzo
<5>[1123750.938108] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1123751.142061] UBIFS: un-mount UBI device 2, volume 0
<5>[1123751.225323] UBI: mtd6 is detached from ubi2
<5>[1145350.602914] UBI: attaching mtd6 to ubi2
<5>[1145350.606974] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1145350.613433] UBI: logical eraseblock size:    126976 bytes
<5>[1145350.619037] UBI: smallest flash I/O unit:    2048
<5>[1145350.623928] UBI: VID header offset:          2048 (aligned 2048)
<5>[1145350.630136] UBI: data offset:                4096
<5>[1145350.738016] UBI: max. sequence number:       504
<5>[1145350.753496] UBI: attached mtd6 to ubi2
<5>[1145350.757471] UBI: MTD device name:            "config"
<5>[1145350.762713] UBI: MTD device size:            15 MiB
<5>[1145350.767788] UBI: number of good PEBs:        120
<5>[1145350.772592] UBI: number of bad PEBs:         0
<5>[1145350.777232] UBI: number of corrupted PEBs:   0
<5>[1145350.781866] UBI: max. allowed volumes:       128
<5>[1145350.786687] UBI: wear-leveling threshold:    4096
<5>[1145350.791577] UBI: number of internal volumes: 1
<5>[1145350.796213] UBI: number of user volumes:     1
<5>[1145350.800841] UBI: available PEBs:             0
<5>[1145350.805477] UBI: total number of reserved PEBs: 120
<5>[1145350.810541] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1145350.816743] UBI: max/mean erase counter: 6/5
<5>[1145350.821198] UBI: image sequence number:  1872325126
<5>[1145350.826349] UBI: background thread "ubi_bgt2d" started, PID 8828
<5>[1145350.947253] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1145350.953456] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1145350.961240] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1145350.968765] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1145350.974788] UBIFS: default compressor: lzo
<5>[1145350.979083] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1145351.187250] UBIFS: un-mount UBI device 2, volume 0
<5>[1145351.231224] UBI: mtd6 is detached from ubi2
<5>[1166950.675981] UBI: attaching mtd6 to ubi2
<5>[1166950.680008] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1166950.686498] UBI: logical eraseblock size:    126976 bytes
<5>[1166950.692085] UBI: smallest flash I/O unit:    2048
<5>[1166950.696982] UBI: VID header offset:          2048 (aligned 2048)
<5>[1166950.703178] UBI: data offset:                4096
<5>[1166950.811126] UBI: max. sequence number:       505
<5>[1166950.826606] UBI: attached mtd6 to ubi2
<5>[1166950.830548] UBI: MTD device name:            "config"
<5>[1166950.835815] UBI: MTD device size:            15 MiB
<5>[1166950.840881] UBI: number of good PEBs:        120
<5>[1166950.845694] UBI: number of bad PEBs:         0
<5>[1166950.850323] UBI: number of corrupted PEBs:   0
<5>[1166950.854955] UBI: max. allowed volumes:       128
<5>[1166950.859767] UBI: wear-leveling threshold:    4096
<5>[1166950.864657] UBI: number of internal volumes: 1
<5>[1166950.869297] UBI: number of user volumes:     1
<5>[1166950.873930] UBI: available PEBs:             0
<5>[1166950.878575] UBI: total number of reserved PEBs: 120
<5>[1166950.883640] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1166950.889845] UBI: max/mean erase counter: 6/5
<5>[1166950.894300] UBI: image sequence number:  1872325126
<5>[1166950.899399] UBI: background thread "ubi_bgt2d" started, PID 13353
<5>[1166951.026052] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1166951.032255] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1166951.040049] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1166951.047570] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1166951.053593] UBIFS: default compressor: lzo
<5>[1166951.057885] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1166951.260992] UBIFS: un-mount UBI device 2, volume 0
<5>[1166951.345393] UBI: mtd6 is detached from ubi2
<5>[1188550.749910] UBI: attaching mtd6 to ubi2
<5>[1188550.753949] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1188550.760447] UBI: logical eraseblock size:    126976 bytes
<5>[1188550.766052] UBI: smallest flash I/O unit:    2048
<5>[1188550.770944] UBI: VID header offset:          2048 (aligned 2048)
<5>[1188550.777152] UBI: data offset:                4096
<5>[1188550.885379] UBI: max. sequence number:       506
<5>[1188550.900803] UBI: attached mtd6 to ubi2
<5>[1188550.904750] UBI: MTD device name:            "config"
<5>[1188550.910024] UBI: MTD device size:            15 MiB
<5>[1188550.915101] UBI: number of good PEBs:        120
<5>[1188550.919904] UBI: number of bad PEBs:         0
<5>[1188550.924532] UBI: number of corrupted PEBs:   0
<5>[1188550.929169] UBI: max. allowed volumes:       128
<5>[1188550.933972] UBI: wear-leveling threshold:    4096
<5>[1188550.938869] UBI: number of internal volumes: 1
<5>[1188550.943498] UBI: number of user volumes:     1
<5>[1188550.948139] UBI: available PEBs:             0
<5>[1188550.952768] UBI: total number of reserved PEBs: 120
<5>[1188550.957842] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1188550.964044] UBI: max/mean erase counter: 6/5
<5>[1188550.968523] UBI: image sequence number:  1872325126
<5>[1188550.973599] UBI: background thread "ubi_bgt2d" started, PID 20784
<5>[1188551.091972] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1188551.098202] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1188551.105984] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1188551.113488] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1188551.119524] UBIFS: default compressor: lzo
<5>[1188551.123806] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1188551.326070] UBIFS: un-mount UBI device 2, volume 0
<5>[1188551.397517] UBI: mtd6 is detached from ubi2
<5>[1210150.821584] UBI: attaching mtd6 to ubi2
<5>[1210150.825649] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1210150.832113] UBI: logical eraseblock size:    126976 bytes
<5>[1210150.837716] UBI: smallest flash I/O unit:    2048
<5>[1210150.842607] UBI: VID header offset:          2048 (aligned 2048)
<5>[1210150.848813] UBI: data offset:                4096
<5>[1210150.956980] UBI: max. sequence number:       507
<5>[1210150.972475] UBI: attached mtd6 to ubi2
<5>[1210150.976450] UBI: MTD device name:            "config"
<5>[1210150.981691] UBI: MTD device size:            15 MiB
<5>[1210150.986767] UBI: number of good PEBs:        120
<5>[1210150.991571] UBI: number of bad PEBs:         0
<5>[1210150.996211] UBI: number of corrupted PEBs:   0
<5>[1210151.000840] UBI: max. allowed volumes:       128
<5>[1210151.005653] UBI: wear-leveling threshold:    4096
<5>[1210151.010548] UBI: number of internal volumes: 1
<5>[1210151.015194] UBI: number of user volumes:     1
<5>[1210151.019823] UBI: available PEBs:             0
<5>[1210151.024450] UBI: total number of reserved PEBs: 120
<5>[1210151.029525] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1210151.035731] UBI: max/mean erase counter: 6/5
<5>[1210151.040185] UBI: image sequence number:  1872325126
<5>[1210151.045285] UBI: background thread "ubi_bgt2d" started, PID 30099
<5>[1210151.166093] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1210151.172296] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1210151.180084] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1210151.187606] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1210151.193628] UBIFS: default compressor: lzo
<5>[1210151.197926] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1210151.399375] UBIFS: un-mount UBI device 2, volume 0
<5>[1210151.454559] UBI: mtd6 is detached from ubi2
<5>[1231750.887468] UBI: attaching mtd6 to ubi2
<5>[1231750.891494] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1231750.897989] UBI: logical eraseblock size:    126976 bytes
<5>[1231750.903590] UBI: smallest flash I/O unit:    2048
<5>[1231750.908483] UBI: VID header offset:          2048 (aligned 2048)
<5>[1231750.914687] UBI: data offset:                4096
<5>[1231751.023348] UBI: max. sequence number:       508
<5>[1231751.038818] UBI: attached mtd6 to ubi2
<5>[1231751.042784] UBI: MTD device name:            "config"
<5>[1231751.048024] UBI: MTD device size:            15 MiB
<5>[1231751.053099] UBI: number of good PEBs:        120
<5>[1231751.057901] UBI: number of bad PEBs:         0
<5>[1231751.062528] UBI: number of corrupted PEBs:   0
<5>[1231751.067167] UBI: max. allowed volumes:       128
<5>[1231751.071971] UBI: wear-leveling threshold:    4096
<5>[1231751.076866] UBI: number of internal volumes: 1
<5>[1231751.081495] UBI: number of user volumes:     1
<5>[1231751.086129] UBI: available PEBs:             0
<5>[1231751.090757] UBI: total number of reserved PEBs: 120
<5>[1231751.095829] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1231751.102031] UBI: max/mean erase counter: 6/5
<5>[1231751.106518] UBI: image sequence number:  1872325126
<5>[1231751.111622] UBI: background thread "ubi_bgt2d" started, PID 2216
<5>[1231751.232577] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1231751.238803] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1231751.246590] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1231751.254108] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1231751.260130] UBIFS: default compressor: lzo
<5>[1231751.264419] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1231751.463536] UBIFS: un-mount UBI device 2, volume 0
<5>[1231751.512970] UBI: mtd6 is detached from ubi2
<5>[1253350.957724] UBI: attaching mtd6 to ubi2
<5>[1253350.961751] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1253350.968262] UBI: logical eraseblock size:    126976 bytes
<5>[1253350.973862] UBI: smallest flash I/O unit:    2048
<5>[1253350.978753] UBI: VID header offset:          2048 (aligned 2048)
<5>[1253350.984961] UBI: data offset:                4096
<5>[1253351.092984] UBI: max. sequence number:       509
<5>[1253351.108535] UBI: attached mtd6 to ubi2
<5>[1253351.112479] UBI: MTD device name:            "config"
<5>[1253351.117781] UBI: MTD device size:            15 MiB
<5>[1253351.122873] UBI: number of good PEBs:        120
<5>[1253351.127681] UBI: number of bad PEBs:         0
<5>[1253351.132309] UBI: number of corrupted PEBs:   0
<5>[1253351.136954] UBI: max. allowed volumes:       128
<5>[1253351.141756] UBI: wear-leveling threshold:    4096
<5>[1253351.146655] UBI: number of internal volumes: 1
<5>[1253351.151284] UBI: number of user volumes:     1
<5>[1253351.155930] UBI: available PEBs:             0
<5>[1253351.160561] UBI: total number of reserved PEBs: 120
<5>[1253351.165635] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1253351.171833] UBI: max/mean erase counter: 6/5
<5>[1253351.176297] UBI: image sequence number:  1872325126
<5>[1253351.181377] UBI: background thread "ubi_bgt2d" started, PID 5635
<5>[1253351.305484] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1253351.311687] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1253351.319472] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1253351.326986] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1253351.333017] UBIFS: default compressor: lzo
<5>[1253351.337299] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1253351.549842] UBIFS: un-mount UBI device 2, volume 0
<5>[1253351.599140] UBI: mtd6 is detached from ubi2
<5>[1274951.033404] UBI: attaching mtd6 to ubi2
<5>[1274951.037443] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1274951.043928] UBI: logical eraseblock size:    126976 bytes
<5>[1274951.049516] UBI: smallest flash I/O unit:    2048
<5>[1274951.054418] UBI: VID header offset:          2048 (aligned 2048)
<5>[1274951.060614] UBI: data offset:                4096
<5>[1274951.168932] UBI: max. sequence number:       510
<5>[1274951.184416] UBI: attached mtd6 to ubi2
<5>[1274951.188358] UBI: MTD device name:            "config"
<5>[1274951.193630] UBI: MTD device size:            15 MiB
<5>[1274951.198695] UBI: number of good PEBs:        120
<5>[1274951.203505] UBI: number of bad PEBs:         0
<5>[1274951.208134] UBI: number of corrupted PEBs:   0
<5>[1274951.212771] UBI: max. allowed volumes:       128
<5>[1274951.217573] UBI: wear-leveling threshold:    4096
<5>[1274951.222461] UBI: number of internal volumes: 1
<5>[1274951.227097] UBI: number of user volumes:     1
<5>[1274951.231725] UBI: available PEBs:             0
<5>[1274951.236366] UBI: total number of reserved PEBs: 120
<5>[1274951.241436] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1274951.247646] UBI: max/mean erase counter: 6/5
<5>[1274951.252101] UBI: image sequence number:  1872325126
<5>[1274951.257196] UBI: background thread "ubi_bgt2d" started, PID 9070
<5>[1274951.380215] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1274951.386439] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1274951.394217] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1274951.401721] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1274951.407753] UBIFS: default compressor: lzo
<5>[1274951.412034] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1274951.623412] UBIFS: un-mount UBI device 2, volume 0
<5>[1274951.668980] UBI: mtd6 is detached from ubi2
<5>[1296551.122669] UBI: attaching mtd6 to ubi2
<5>[1296551.126736] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1296551.133221] UBI: logical eraseblock size:    126976 bytes
<5>[1296551.138807] UBI: smallest flash I/O unit:    2048
<5>[1296551.143707] UBI: VID header offset:          2048 (aligned 2048)
<5>[1296551.149903] UBI: data offset:                4096
<5>[1296551.257784] UBI: max. sequence number:       511
<5>[1296551.273268] UBI: attached mtd6 to ubi2
<5>[1296551.277211] UBI: MTD device name:            "config"
<5>[1296551.282450] UBI: MTD device size:            15 MiB
<5>[1296551.287553] UBI: number of good PEBs:        120
<5>[1296551.292365] UBI: number of bad PEBs:         0
<5>[1296551.297031] UBI: number of corrupted PEBs:   0
<5>[1296551.301671] UBI: max. allowed volumes:       128
<5>[1296551.306497] UBI: wear-leveling threshold:    4096
<5>[1296551.311388] UBI: number of internal volumes: 1
<5>[1296551.316044] UBI: number of user volumes:     1
<5>[1296551.320674] UBI: available PEBs:             0
<5>[1296551.325312] UBI: total number of reserved PEBs: 120
<5>[1296551.330376] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1296551.336579] UBI: max/mean erase counter: 6/5
<5>[1296551.341034] UBI: image sequence number:  1872325126
<5>[1296551.346129] UBI: background thread "ubi_bgt2d" started, PID 14597
<5>[1296551.470828] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1296551.477053] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1296551.484837] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1296551.492342] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1296551.498378] UBIFS: default compressor: lzo
<5>[1296551.502661] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1296551.705416] UBIFS: un-mount UBI device 2, volume 0
<5>[1296551.749021] UBI: mtd6 is detached from ubi2
<5>[1318151.173287] UBI: attaching mtd6 to ubi2
<5>[1318151.177315] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1318151.183807] UBI: logical eraseblock size:    126976 bytes
<5>[1318151.189397] UBI: smallest flash I/O unit:    2048
<5>[1318151.194305] UBI: VID header offset:          2048 (aligned 2048)
<5>[1318151.200507] UBI: data offset:                4096
<5>[1318151.309782] UBI: max. sequence number:       512
<5>[1318151.325300] UBI: attached mtd6 to ubi2
<5>[1318151.329240] UBI: MTD device name:            "config"
<5>[1318151.334504] UBI: MTD device size:            15 MiB
<5>[1318151.339569] UBI: number of good PEBs:        120
<5>[1318151.344383] UBI: number of bad PEBs:         0
<5>[1318151.349011] UBI: number of corrupted PEBs:   0
<5>[1318151.353646] UBI: max. allowed volumes:       128
<5>[1318151.358450] UBI: wear-leveling threshold:    4096
<5>[1318151.363346] UBI: number of internal volumes: 1
<5>[1318151.367975] UBI: number of user volumes:     1
<5>[1318151.372602] UBI: available PEBs:             0
<5>[1318151.377237] UBI: total number of reserved PEBs: 120
<5>[1318151.382301] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1318151.388505] UBI: max/mean erase counter: 6/5
<5>[1318151.392966] UBI: image sequence number:  1872325126
<5>[1318151.398042] UBI: background thread "ubi_bgt2d" started, PID 17916
<5>[1318151.516618] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1318151.522842] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1318151.530610] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1318151.538123] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1318151.544155] UBIFS: default compressor: lzo
<5>[1318151.548436] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1318151.756222] UBIFS: un-mount UBI device 2, volume 0
<5>[1318151.829306] UBI: mtd6 is detached from ubi2
<5>[1339751.242512] UBI: attaching mtd6 to ubi2
<5>[1339751.246594] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1339751.253068] UBI: logical eraseblock size:    126976 bytes
<5>[1339751.258660] UBI: smallest flash I/O unit:    2048
<5>[1339751.263564] UBI: VID header offset:          2048 (aligned 2048)
<5>[1339751.269760] UBI: data offset:                4096
<5>[1339751.377734] UBI: max. sequence number:       513
<5>[1339751.393185] UBI: attached mtd6 to ubi2
<5>[1339751.397126] UBI: MTD device name:            "config"
<5>[1339751.402366] UBI: MTD device size:            15 MiB
<5>[1339751.407461] UBI: number of good PEBs:        120
<5>[1339751.412271] UBI: number of bad PEBs:         0
<5>[1339751.416929] UBI: number of corrupted PEBs:   0
<5>[1339751.421560] UBI: max. allowed volumes:       128
<5>[1339751.426370] UBI: wear-leveling threshold:    4096
<5>[1339751.431260] UBI: number of internal volumes: 1
<5>[1339751.435896] UBI: number of user volumes:     1
<5>[1339751.440525] UBI: available PEBs:             0
<5>[1339751.445162] UBI: total number of reserved PEBs: 120
<5>[1339751.450226] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1339751.456430] UBI: max/mean erase counter: 6/5
<5>[1339751.460885] UBI: image sequence number:  1872325126
<5>[1339751.468341] UBI: background thread "ubi_bgt2d" started, PID 21232
<5>[1339751.594780] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1339751.600983] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1339751.608780] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1339751.616330] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1339751.622354] UBIFS: default compressor: lzo
<5>[1339751.626648] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1339751.856404] UBIFS: un-mount UBI device 2, volume 0
<5>[1339751.939791] UBI: mtd6 is detached from ubi2
<5>[1361351.317924] UBI: attaching mtd6 to ubi2
<5>[1361351.321950] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1361351.328447] UBI: logical eraseblock size:    126976 bytes
<5>[1361351.334054] UBI: smallest flash I/O unit:    2048
<5>[1361351.338945] UBI: VID header offset:          2048 (aligned 2048)
<5>[1361351.345148] UBI: data offset:                4096
<5>[1361351.453298] UBI: max. sequence number:       514
<5>[1361351.468759] UBI: attached mtd6 to ubi2
<5>[1361351.472727] UBI: MTD device name:            "config"
<5>[1361351.477968] UBI: MTD device size:            15 MiB
<5>[1361351.483040] UBI: number of good PEBs:        120
<5>[1361351.487843] UBI: number of bad PEBs:         0
<5>[1361351.492470] UBI: number of corrupted PEBs:   0
<5>[1361351.497105] UBI: max. allowed volumes:       128
<5>[1361351.501907] UBI: wear-leveling threshold:    4096
<5>[1361351.506807] UBI: number of internal volumes: 1
<5>[1361351.511466] UBI: number of user volumes:     1
<5>[1361351.516123] UBI: available PEBs:             0
<5>[1361351.520767] UBI: total number of reserved PEBs: 120
<5>[1361351.525854] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1361351.532064] UBI: max/mean erase counter: 6/5
<5>[1361351.536542] UBI: image sequence number:  1872325126
<5>[1361351.541622] UBI: background thread "ubi_bgt2d" started, PID 24544
<5>[1361351.667009] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1361351.673253] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1361351.681021] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1361351.688539] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1361351.694572] UBIFS: default compressor: lzo
<5>[1361351.698853] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1361351.902942] UBIFS: un-mount UBI device 2, volume 0
<5>[1361351.948900] UBI: mtd6 is detached from ubi2
<5>[1382951.392212] UBI: attaching mtd6 to ubi2
<5>[1382951.396276] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1382951.402756] UBI: logical eraseblock size:    126976 bytes
<5>[1382951.408343] UBI: smallest flash I/O unit:    2048
<5>[1382951.413245] UBI: VID header offset:          2048 (aligned 2048)
<5>[1382951.419441] UBI: data offset:                4096
<5>[1382951.527604] UBI: max. sequence number:       515
<5>[1382951.543089] UBI: attached mtd6 to ubi2
<5>[1382951.547028] UBI: MTD device name:            "config"
<5>[1382951.552268] UBI: MTD device size:            15 MiB
<5>[1382951.557356] UBI: number of good PEBs:        120
<5>[1382951.562160] UBI: number of bad PEBs:         0
<5>[1382951.566798] UBI: number of corrupted PEBs:   0
<5>[1382951.571427] UBI: max. allowed volumes:       128
<5>[1382951.576237] UBI: wear-leveling threshold:    4096
<5>[1382951.581126] UBI: number of internal volumes: 1
<5>[1382951.585761] UBI: number of user volumes:     1
<5>[1382951.590389] UBI: available PEBs:             0
<5>[1382951.595027] UBI: total number of reserved PEBs: 120
<5>[1382951.600091] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1382951.606293] UBI: max/mean erase counter: 6/5
<5>[1382951.610748] UBI: image sequence number:  1872325126
<5>[1382951.615902] UBI: background thread "ubi_bgt2d" started, PID 27866
<5>[1382951.737448] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1382951.743676] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1382951.751443] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1382951.758966] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1382951.765006] UBIFS: default compressor: lzo
<5>[1382951.769288] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1382951.975268] UBIFS: un-mount UBI device 2, volume 0
<5>[1382952.032526] UBI: mtd6 is detached from ubi2
<5>[1404551.508873] UBI: attaching mtd6 to ubi2
<5>[1404551.512969] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1404551.519452] UBI: logical eraseblock size:    126976 bytes
<5>[1404551.525069] UBI: smallest flash I/O unit:    2048
<5>[1404551.529986] UBI: VID header offset:          2048 (aligned 2048)
<5>[1404551.536212] UBI: data offset:                4096
<5>[1404551.644183] UBI: max. sequence number:       518
<5>[1404551.659637] UBI: attached mtd6 to ubi2
<5>[1404551.663611] UBI: MTD device name:            "config"
<5>[1404551.668852] UBI: MTD device size:            15 MiB
<5>[1404551.673935] UBI: number of good PEBs:        120
<5>[1404551.678748] UBI: number of bad PEBs:         0
<5>[1404551.683399] UBI: number of corrupted PEBs:   0
<5>[1404551.688033] UBI: max. allowed volumes:       128
<5>[1404551.692849] UBI: wear-leveling threshold:    4096
<5>[1404551.697744] UBI: number of internal volumes: 1
<5>[1404551.702385] UBI: number of user volumes:     1
<5>[1404551.707030] UBI: available PEBs:             0
<5>[1404551.711659] UBI: total number of reserved PEBs: 120
<5>[1404551.716734] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1404551.722938] UBI: max/mean erase counter: 6/5
<5>[1404551.727392] UBI: image sequence number:  1872325126
<5>[1404551.732469] UBI: background thread "ubi_bgt2d" started, PID 31212
<5>[1404551.851889] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1404551.858123] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1404551.865913] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1404551.873428] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1404551.879451] UBIFS: default compressor: lzo
<5>[1404551.883738] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1404552.086016] UBIFS: un-mount UBI device 2, volume 0
<5>[1404552.149247] UBI: mtd6 is detached from ubi2
<5>[1426151.568022] UBI: attaching mtd6 to ubi2
<5>[1426151.572064] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1426151.578562] UBI: logical eraseblock size:    126976 bytes
<5>[1426151.584163] UBI: smallest flash I/O unit:    2048
<5>[1426151.589053] UBI: VID header offset:          2048 (aligned 2048)
<5>[1426151.595321] UBI: data offset:                4096
<5>[1426151.703689] UBI: max. sequence number:       519
<5>[1426151.719144] UBI: attached mtd6 to ubi2
<5>[1426151.723112] UBI: MTD device name:            "config"
<5>[1426151.728354] UBI: MTD device size:            15 MiB
<5>[1426151.733428] UBI: number of good PEBs:        120
<5>[1426151.738233] UBI: number of bad PEBs:         0
<5>[1426151.742869] UBI: number of corrupted PEBs:   0
<5>[1426151.747497] UBI: max. allowed volumes:       128
<5>[1426151.752299] UBI: wear-leveling threshold:    4096
<5>[1426151.757195] UBI: number of internal volumes: 1
<5>[1426151.761828] UBI: number of user volumes:     1
<5>[1426151.766467] UBI: available PEBs:             0
<5>[1426151.771096] UBI: total number of reserved PEBs: 120
<5>[1426151.776169] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1426151.782365] UBI: max/mean erase counter: 6/5
<5>[1426151.786826] UBI: image sequence number:  1872325126
<5>[1426151.791904] UBI: background thread "ubi_bgt2d" started, PID 2234
<5>[1426151.919699] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1426151.925957] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1426151.933745] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1426151.941250] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1426151.947289] UBIFS: default compressor: lzo
<5>[1426151.951573] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1426152.174561] UBIFS: un-mount UBI device 2, volume 0
<5>[1426152.224535] UBI: mtd6 is detached from ubi2
<5>[1447751.635309] UBI: attaching mtd6 to ubi2
<5>[1447751.639337] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1447751.645829] UBI: logical eraseblock size:    126976 bytes
<5>[1447751.651422] UBI: smallest flash I/O unit:    2048
<5>[1447751.656327] UBI: VID header offset:          2048 (aligned 2048)
<5>[1447751.662523] UBI: data offset:                4096
<5>[1447751.770383] UBI: max. sequence number:       520
<5>[1447751.785861] UBI: attached mtd6 to ubi2
<5>[1447751.789801] UBI: MTD device name:            "config"
<5>[1447751.795070] UBI: MTD device size:            15 MiB
<5>[1447751.800134] UBI: number of good PEBs:        120
<5>[1447751.804965] UBI: number of bad PEBs:         0
<5>[1447751.809599] UBI: number of corrupted PEBs:   0
<5>[1447751.814243] UBI: max. allowed volumes:       128
<5>[1447751.819045] UBI: wear-leveling threshold:    4096
<5>[1447751.823943] UBI: number of internal volumes: 1
<5>[1447751.828572] UBI: number of user volumes:     1
<5>[1447751.833210] UBI: available PEBs:             0
<5>[1447751.837840] UBI: total number of reserved PEBs: 120
<5>[1447751.842912] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1447751.849108] UBI: max/mean erase counter: 6/5
<5>[1447751.853570] UBI: image sequence number:  1872325126
<5>[1447751.858648] UBI: background thread "ubi_bgt2d" started, PID 5570
<5>[1447751.983669] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1447751.989872] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1447751.997662] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1447752.005180] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1447752.011207] UBIFS: default compressor: lzo
<5>[1447752.015498] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1447752.221831] UBIFS: un-mount UBI device 2, volume 0
<5>[1447752.279046] UBI: mtd6 is detached from ubi2
<5>[1469351.709750] UBI: attaching mtd6 to ubi2
<5>[1469351.713809] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1469351.720268] UBI: logical eraseblock size:    126976 bytes
<5>[1469351.725871] UBI: smallest flash I/O unit:    2048
<5>[1469351.730767] UBI: VID header offset:          2048 (aligned 2048)
<5>[1469351.736991] UBI: data offset:                4096
<5>[1469351.846413] UBI: max. sequence number:       521
<5>[1469351.861881] UBI: attached mtd6 to ubi2
<5>[1469351.865856] UBI: MTD device name:            "config"
<5>[1469351.871097] UBI: MTD device size:            15 MiB
<5>[1469351.876183] UBI: number of good PEBs:        120
<5>[1469351.880987] UBI: number of bad PEBs:         0
<5>[1469351.885627] UBI: number of corrupted PEBs:   0
<5>[1469351.890256] UBI: max. allowed volumes:       128
<5>[1469351.895069] UBI: wear-leveling threshold:    4096
<5>[1469351.899958] UBI: number of internal volumes: 1
<5>[1469351.904596] UBI: number of user volumes:     1
<5>[1469351.909224] UBI: available PEBs:             0
<5>[1469351.913861] UBI: total number of reserved PEBs: 120
<5>[1469351.918925] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1469351.925129] UBI: max/mean erase counter: 6/5
<5>[1469351.929583] UBI: image sequence number:  1872325126
<5>[1469351.934683] UBI: background thread "ubi_bgt2d" started, PID 9274
<5>[1469352.055844] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1469352.062048] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1469352.069839] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1469352.077357] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1469352.083392] UBIFS: default compressor: lzo
<5>[1469352.087675] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1469352.292003] UBIFS: un-mount UBI device 2, volume 0
<5>[1469352.348898] UBI: mtd6 is detached from ubi2
<5>[1490951.783589] UBI: attaching mtd6 to ubi2
<5>[1490951.787615] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1490951.794107] UBI: logical eraseblock size:    126976 bytes
<5>[1490951.799694] UBI: smallest flash I/O unit:    2048
<5>[1490951.804597] UBI: VID header offset:          2048 (aligned 2048)
<5>[1490951.810794] UBI: data offset:                4096
<5>[1490951.918678] UBI: max. sequence number:       522
<5>[1490951.934152] UBI: attached mtd6 to ubi2
<5>[1490951.938093] UBI: MTD device name:            "config"
<5>[1490951.943354] UBI: MTD device size:            15 MiB
<5>[1490951.948419] UBI: number of good PEBs:        120
<5>[1490951.953239] UBI: number of bad PEBs:         0
<5>[1490951.957891] UBI: number of corrupted PEBs:   0
<5>[1490951.962529] UBI: max. allowed volumes:       128
<5>[1490951.967372] UBI: wear-leveling threshold:    4096
<5>[1490951.972264] UBI: number of internal volumes: 1
<5>[1490951.976912] UBI: number of user volumes:     1
<5>[1490951.981543] UBI: available PEBs:             0
<5>[1490951.986181] UBI: total number of reserved PEBs: 120
<5>[1490951.991246] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1490951.997457] UBI: max/mean erase counter: 6/5
<5>[1490952.001912] UBI: image sequence number:  1872325126
<5>[1490952.007238] UBI: background thread "ubi_bgt2d" started, PID 12667
<5>[1490952.128809] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1490952.135035] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1490952.142814] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1490952.150318] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1490952.156355] UBIFS: default compressor: lzo
<5>[1490952.160638] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1490952.361861] UBIFS: un-mount UBI device 2, volume 0
<5>[1490952.408920] UBI: mtd6 is detached from ubi2
<5>[1512551.893287] UBI: attaching mtd6 to ubi2
<5>[1512551.897313] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1512551.904060] UBI: logical eraseblock size:    126976 bytes
<5>[1512551.911416] UBI: smallest flash I/O unit:    2048
<5>[1512551.916326] UBI: VID header offset:          2048 (aligned 2048)
<5>[1512551.922522] UBI: data offset:                4096
<5>[1512552.030896] UBI: max. sequence number:       523
<5>[1512552.047703] UBI: attached mtd6 to ubi2
<5>[1512552.051704] UBI: MTD device name:            "config"
<5>[1512552.056976] UBI: MTD device size:            15 MiB
<5>[1512552.062041] UBI: number of good PEBs:        120
<5>[1512552.066853] UBI: number of bad PEBs:         0
<5>[1512552.071487] UBI: number of corrupted PEBs:   0
<5>[1512552.076133] UBI: max. allowed volumes:       128
<5>[1512552.080996] UBI: wear-leveling threshold:    4096
<5>[1512552.085903] UBI: number of internal volumes: 1
<5>[1512552.090533] UBI: number of user volumes:     1
<5>[1512552.095170] UBI: available PEBs:             0
<5>[1512552.099799] UBI: total number of reserved PEBs: 120
<5>[1512552.104892] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1512552.111099] UBI: max/mean erase counter: 6/5
<5>[1512552.115588] UBI: image sequence number:  1872325126
<5>[1512552.121120] UBI: background thread "ubi_bgt2d" started, PID 16059
<5>[1512552.271178] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1512552.277412] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1512552.285197] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1512552.292713] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1512552.298735] UBIFS: default compressor: lzo
<5>[1512552.303030] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1512552.503622] UBIFS: un-mount UBI device 2, volume 0
<5>[1512552.564082] UBI: mtd6 is detached from ubi2
<5>[1534151.923042] UBI: attaching mtd6 to ubi2
<5>[1534151.927080] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1534151.933554] UBI: logical eraseblock size:    126976 bytes
<5>[1534151.939142] UBI: smallest flash I/O unit:    2048
<5>[1534151.944042] UBI: VID header offset:          2048 (aligned 2048)
<5>[1534151.950245] UBI: data offset:                4096
<5>[1534152.058869] UBI: max. sequence number:       524
<5>[1534152.074337] UBI: attached mtd6 to ubi2
<5>[1534152.078280] UBI: MTD device name:            "config"
<5>[1534152.083543] UBI: MTD device size:            15 MiB
<5>[1534152.088608] UBI: number of good PEBs:        120
<5>[1534152.093424] UBI: number of bad PEBs:         0
<5>[1534152.098053] UBI: number of corrupted PEBs:   0
<5>[1534152.102680] UBI: max. allowed volumes:       128
<5>[1534152.107492] UBI: wear-leveling threshold:    4096
<5>[1534152.112387] UBI: number of internal volumes: 1
<5>[1534152.117028] UBI: number of user volumes:     1
<5>[1534152.121660] UBI: available PEBs:             0
<5>[1534152.126299] UBI: total number of reserved PEBs: 120
<5>[1534152.131364] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1534152.137568] UBI: max/mean erase counter: 6/5
<5>[1534152.142022] UBI: image sequence number:  1872325126
<5>[1534152.147123] UBI: background thread "ubi_bgt2d" started, PID 19407
<5>[1534152.273441] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1534152.279645] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1534152.287431] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1534152.294944] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1534152.300966] UBIFS: default compressor: lzo
<5>[1534152.305258] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1534152.528157] UBIFS: un-mount UBI device 2, volume 0
<5>[1534152.589006] UBI: mtd6 is detached from ubi2
<5>[1555752.002937] UBI: attaching mtd6 to ubi2
<5>[1555752.006965] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1555752.013492] UBI: logical eraseblock size:    126976 bytes
<5>[1555752.019105] UBI: smallest flash I/O unit:    2048
<5>[1555752.024025] UBI: VID header offset:          2048 (aligned 2048)
<5>[1555752.030239] UBI: data offset:                4096
<5>[1555752.138433] UBI: max. sequence number:       525
<5>[1555752.153922] UBI: attached mtd6 to ubi2
<5>[1555752.157863] UBI: MTD device name:            "config"
<5>[1555752.163123] UBI: MTD device size:            15 MiB
<5>[1555752.168187] UBI: number of good PEBs:        120
<5>[1555752.172999] UBI: number of bad PEBs:         0
<5>[1555752.177628] UBI: number of corrupted PEBs:   0
<5>[1555752.182256] UBI: max. allowed volumes:       128
<5>[1555752.187065] UBI: wear-leveling threshold:    4096
<5>[1555752.191954] UBI: number of internal volumes: 1
<5>[1555752.196591] UBI: number of user volumes:     1
<5>[1555752.201219] UBI: available PEBs:             0
<5>[1555752.205853] UBI: total number of reserved PEBs: 120
<5>[1555752.210917] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1555752.217120] UBI: max/mean erase counter: 6/5
<5>[1555752.221579] UBI: image sequence number:  1872325126
<5>[1555752.226681] UBI: background thread "ubi_bgt2d" started, PID 27263
<5>[1555752.347567] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1555752.353792] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1555752.361560] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1555752.369081] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1555752.375116] UBIFS: default compressor: lzo
<5>[1555752.379396] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1555752.605532] UBIFS: un-mount UBI device 2, volume 0
<5>[1555752.644921] UBI: mtd6 is detached from ubi2
<5>[1577352.065275] UBI: attaching mtd6 to ubi2
<5>[1577352.069302] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1577352.075802] UBI: logical eraseblock size:    126976 bytes
<5>[1577352.081397] UBI: smallest flash I/O unit:    2048
<5>[1577352.086303] UBI: VID header offset:          2048 (aligned 2048)
<5>[1577352.092500] UBI: data offset:                4096
<5>[1577352.200363] UBI: max. sequence number:       526
<5>[1577352.215815] UBI: attached mtd6 to ubi2
<5>[1577352.219757] UBI: MTD device name:            "config"
<5>[1577352.225045] UBI: MTD device size:            15 MiB
<5>[1577352.230123] UBI: number of good PEBs:        120
<5>[1577352.234957] UBI: number of bad PEBs:         0
<5>[1577352.239587] UBI: number of corrupted PEBs:   0
<5>[1577352.244226] UBI: max. allowed volumes:       128
<5>[1577352.249029] UBI: wear-leveling threshold:    4096
<5>[1577352.253959] UBI: number of internal volumes: 1
<5>[1577352.258594] UBI: number of user volumes:     1
<5>[1577352.263234] UBI: available PEBs:             0
<5>[1577352.267862] UBI: total number of reserved PEBs: 120
<5>[1577352.272931] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1577352.279128] UBI: max/mean erase counter: 6/5
<5>[1577352.283590] UBI: image sequence number:  1872325126
<5>[1577352.288669] UBI: background thread "ubi_bgt2d" started, PID 30701
<5>[1577352.408030] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1577352.414260] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1577352.422027] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1577352.429540] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1577352.435579] UBIFS: default compressor: lzo
<5>[1577352.439862] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1577352.663674] UBIFS: un-mount UBI device 2, volume 0
<5>[1577352.718952] UBI: mtd6 is detached from ubi2
<5>[1598952.351156] UBI: attaching mtd6 to ubi2
<5>[1598952.355233] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1598952.361713] UBI: logical eraseblock size:    126976 bytes
<5>[1598952.367325] UBI: smallest flash I/O unit:    2048
<5>[1598952.372217] UBI: VID header offset:          2048 (aligned 2048)
<5>[1598952.378439] UBI: data offset:                4096
<5>[1598952.496313] UBI: max. sequence number:       527
<5>[1598952.513489] UBI: attached mtd6 to ubi2
<5>[1598952.517444] UBI: MTD device name:            "config"
<5>[1598952.522741] UBI: MTD device size:            15 MiB
<5>[1598952.527814] UBI: number of good PEBs:        120
<5>[1598952.532617] UBI: number of bad PEBs:         0
<5>[1598952.537268] UBI: number of corrupted PEBs:   0
<5>[1598952.541897] UBI: max. allowed volumes:       128
<5>[1598952.546716] UBI: wear-leveling threshold:    4096
<5>[1598952.551606] UBI: number of internal volumes: 1
<5>[1598952.556253] UBI: number of user volumes:     1
<5>[1598952.560882] UBI: available PEBs:             0
<5>[1598952.565540] UBI: total number of reserved PEBs: 120
<5>[1598952.570606] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1598952.576845] UBI: max/mean erase counter: 6/5
<5>[1598952.581305] UBI: image sequence number:  1872325126
<5>[1598952.586524] UBI: background thread "ubi_bgt2d" started, PID 4745
<5>[1598952.705715] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1598952.711929] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1598952.719715] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1598952.727232] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1598952.733264] UBIFS: default compressor: lzo
<5>[1598952.737545] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1598952.951437] UBIFS: un-mount UBI device 2, volume 0
<5>[1598953.033783] UBI: mtd6 is detached from ubi2
<5>[1620552.203383] UBI: attaching mtd6 to ubi2
<5>[1620552.207409] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1620552.213893] UBI: logical eraseblock size:    126976 bytes
<5>[1620552.219481] UBI: smallest flash I/O unit:    2048
<5>[1620552.224410] UBI: VID header offset:          2048 (aligned 2048)
<5>[1620552.230607] UBI: data offset:                4096
<5>[1620552.338512] UBI: max. sequence number:       528
<5>[1620552.353966] UBI: attached mtd6 to ubi2
<5>[1620552.357906] UBI: MTD device name:            "config"
<5>[1620552.363177] UBI: MTD device size:            15 MiB
<5>[1620552.368242] UBI: number of good PEBs:        120
<5>[1620552.373057] UBI: number of bad PEBs:         0
<5>[1620552.377686] UBI: number of corrupted PEBs:   0
<5>[1620552.382313] UBI: max. allowed volumes:       128
<5>[1620552.387126] UBI: wear-leveling threshold:    4096
<5>[1620552.392016] UBI: number of internal volumes: 1
<5>[1620552.396652] UBI: number of user volumes:     1
<5>[1620552.401281] UBI: available PEBs:             0
<5>[1620552.405925] UBI: total number of reserved PEBs: 120
<5>[1620552.410991] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1620552.417198] UBI: max/mean erase counter: 6/5
<5>[1620552.421654] UBI: image sequence number:  1872325126
<5>[1620552.426754] UBI: background thread "ubi_bgt2d" started, PID 8276
<5>[1620552.548812] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1620552.555041] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1620552.562820] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1620552.570323] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1620552.576357] UBIFS: default compressor: lzo
<5>[1620552.580637] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1620552.790545] UBIFS: un-mount UBI device 2, volume 0
<5>[1620552.852441] UBI: mtd6 is detached from ubi2
<5>[1642152.305907] UBI: attaching mtd6 to ubi2
<5>[1642152.309963] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1642152.316467] UBI: logical eraseblock size:    126976 bytes
<5>[1642152.322059] UBI: smallest flash I/O unit:    2048
<5>[1642152.326970] UBI: VID header offset:          2048 (aligned 2048)
<5>[1642152.333177] UBI: data offset:                4096
<5>[1642152.457797] UBI: max. sequence number:       529
<5>[1642152.474598] UBI: attached mtd6 to ubi2
<5>[1642152.478536] UBI: MTD device name:            "config"
<5>[1642152.483848] UBI: MTD device size:            15 MiB
<5>[1642152.488932] UBI: number of good PEBs:        120
<5>[1642152.493755] UBI: number of bad PEBs:         0
<5>[1642152.498391] UBI: number of corrupted PEBs:   0
<5>[1642152.503044] UBI: max. allowed volumes:       128
<5>[1642152.507856] UBI: wear-leveling threshold:    4096
<5>[1642152.512772] UBI: number of internal volumes: 1
<5>[1642152.517402] UBI: number of user volumes:     1
<5>[1642152.522029] UBI: available PEBs:             0
<5>[1642152.526669] UBI: total number of reserved PEBs: 120
<5>[1642152.531733] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1642152.537940] UBI: max/mean erase counter: 6/5
<5>[1642152.542394] UBI: image sequence number:  1872325126
<5>[1642152.551466] UBI: background thread "ubi_bgt2d" started, PID 11935
<5>[1642152.681808] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1642152.688040] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1642152.695823] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1642152.703337] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1642152.709359] UBIFS: default compressor: lzo
<5>[1642152.713649] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1642152.913612] UBIFS: un-mount UBI device 2, volume 0
<5>[1642152.962437] UBI: mtd6 is detached from ubi2
<5>[1663752.344701] UBI: attaching mtd6 to ubi2
<5>[1663752.348728] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1663752.355210] UBI: logical eraseblock size:    126976 bytes
<5>[1663752.360799] UBI: smallest flash I/O unit:    2048
<5>[1663752.365704] UBI: VID header offset:          2048 (aligned 2048)
<5>[1663752.371901] UBI: data offset:                4096
<5>[1663752.479918] UBI: max. sequence number:       530
<5>[1663752.495374] UBI: attached mtd6 to ubi2
<5>[1663752.499330] UBI: MTD device name:            "config"
<5>[1663752.504598] UBI: MTD device size:            15 MiB
<5>[1663752.509665] UBI: number of good PEBs:        120
<5>[1663752.514477] UBI: number of bad PEBs:         0
<5>[1663752.519106] UBI: number of corrupted PEBs:   0
<5>[1663752.523743] UBI: max. allowed volumes:       128
<5>[1663752.528547] UBI: wear-leveling threshold:    4096
<5>[1663752.533443] UBI: number of internal volumes: 1
<5>[1663752.538072] UBI: number of user volumes:     1
<5>[1663752.542709] UBI: available PEBs:             0
<5>[1663752.547339] UBI: total number of reserved PEBs: 120
<5>[1663752.552403] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1663752.558610] UBI: max/mean erase counter: 6/5
<5>[1663752.563083] UBI: image sequence number:  1872325126
<5>[1663752.568157] UBI: background thread "ubi_bgt2d" started, PID 15433
<5>[1663752.692178] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1663752.698422] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1663752.706207] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1663752.713721] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1663752.719745] UBIFS: default compressor: lzo
<5>[1663752.724036] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1663752.925152] UBIFS: un-mount UBI device 2, volume 0
<5>[1663752.984773] UBI: mtd6 is detached from ubi2
<5>[1685352.423121] UBI: attaching mtd6 to ubi2
<5>[1685352.427160] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1685352.433650] UBI: logical eraseblock size:    126976 bytes
<5>[1685352.439242] UBI: smallest flash I/O unit:    2048
<5>[1685352.444142] UBI: VID header offset:          2048 (aligned 2048)
<5>[1685352.450336] UBI: data offset:                4096
<5>[1685352.558450] UBI: max. sequence number:       531
<5>[1685352.573929] UBI: attached mtd6 to ubi2
<5>[1685352.577870] UBI: MTD device name:            "config"
<5>[1685352.583136] UBI: MTD device size:            15 MiB
<5>[1685352.588207] UBI: number of good PEBs:        120
<5>[1685352.593065] UBI: number of bad PEBs:         0
<5>[1685352.597696] UBI: number of corrupted PEBs:   0
<5>[1685352.602323] UBI: max. allowed volumes:       128
<5>[1685352.607139] UBI: wear-leveling threshold:    4096
<5>[1685352.612030] UBI: number of internal volumes: 1
<5>[1685352.616666] UBI: number of user volumes:     1
<5>[1685352.621295] UBI: available PEBs:             0
<5>[1685352.625929] UBI: total number of reserved PEBs: 120
<5>[1685352.630993] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1685352.637197] UBI: max/mean erase counter: 6/5
<5>[1685352.641657] UBI: image sequence number:  1872325126
<5>[1685352.646800] UBI: background thread "ubi_bgt2d" started, PID 18756
<5>[1685352.768077] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1685352.774309] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1685352.782076] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1685352.789595] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1685352.795631] UBIFS: default compressor: lzo
<5>[1685352.799912] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1685353.047346] UBIFS: un-mount UBI device 2, volume 0
<5>[1685353.119084] UBI: mtd6 is detached from ubi2
<5>[1706952.494102] UBI: attaching mtd6 to ubi2
<5>[1706952.498128] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1706952.504607] UBI: logical eraseblock size:    126976 bytes
<5>[1706952.510200] UBI: smallest flash I/O unit:    2048
<5>[1706952.515102] UBI: VID header offset:          2048 (aligned 2048)
<5>[1706952.521298] UBI: data offset:                4096
<5>[1706952.629168] UBI: max. sequence number:       532
<5>[1706952.644753] UBI: attached mtd6 to ubi2
<5>[1706952.648730] UBI: MTD device name:            "config"
<5>[1706952.654016] UBI: MTD device size:            15 MiB
<5>[1706952.659082] UBI: number of good PEBs:        120
<5>[1706952.663914] UBI: number of bad PEBs:         0
<5>[1706952.668545] UBI: number of corrupted PEBs:   0
<5>[1706952.673181] UBI: max. allowed volumes:       128
<5>[1706952.677985] UBI: wear-leveling threshold:    4096
<5>[1706952.682881] UBI: number of internal volumes: 1
<5>[1706952.687509] UBI: number of user volumes:     1
<5>[1706952.692137] UBI: available PEBs:             0
<5>[1706952.696771] UBI: total number of reserved PEBs: 120
<5>[1706952.701835] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1706952.708042] UBI: max/mean erase counter: 6/5
<5>[1706952.712502] UBI: image sequence number:  1872325126
<5>[1706952.717610] UBI: background thread "ubi_bgt2d" started, PID 22152
<5>[1706952.846031] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1706952.852235] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1706952.860024] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1706952.867546] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1706952.873580] UBIFS: default compressor: lzo
<5>[1706952.877861] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1706953.078190] UBIFS: un-mount UBI device 2, volume 0
<5>[1706953.138920] UBI: mtd6 is detached from ubi2
<5>[1728552.574943] UBI: attaching mtd6 to ubi2
<5>[1728552.578969] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1728552.585466] UBI: logical eraseblock size:    126976 bytes
<5>[1728552.591058] UBI: smallest flash I/O unit:    2048
<5>[1728552.595971] UBI: VID header offset:          2048 (aligned 2048)
<5>[1728552.602170] UBI: data offset:                4096
<5>[1728552.710043] UBI: max. sequence number:       533
<5>[1728552.725526] UBI: attached mtd6 to ubi2
<5>[1728552.729487] UBI: MTD device name:            "config"
<5>[1728552.734749] UBI: MTD device size:            15 MiB
<5>[1728552.739815] UBI: number of good PEBs:        120
<5>[1728552.744634] UBI: number of bad PEBs:         0
<5>[1728552.749273] UBI: number of corrupted PEBs:   0
<5>[1728552.753920] UBI: max. allowed volumes:       128
<5>[1728552.758723] UBI: wear-leveling threshold:    4096
<5>[1728552.763618] UBI: number of internal volumes: 1
<5>[1728552.768247] UBI: number of user volumes:     1
<5>[1728552.772881] UBI: available PEBs:             0
<5>[1728552.777509] UBI: total number of reserved PEBs: 120
<5>[1728552.782572] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1728552.788775] UBI: max/mean erase counter: 6/5
<5>[1728552.793239] UBI: image sequence number:  1872325126
<5>[1728552.798315] UBI: background thread "ubi_bgt2d" started, PID 25625
<5>[1728552.923935] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1728552.930138] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1728552.937958] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1728552.945504] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1728552.951532] UBIFS: default compressor: lzo
<5>[1728552.955834] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1728553.158808] UBIFS: un-mount UBI device 2, volume 0
<5>[1728553.228889] UBI: mtd6 is detached from ubi2
<5>[1750152.630743] UBI: attaching mtd6 to ubi2
<5>[1750152.634806] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1750152.641279] UBI: logical eraseblock size:    126976 bytes
<5>[1750152.646880] UBI: smallest flash I/O unit:    2048
<5>[1750152.651772] UBI: VID header offset:          2048 (aligned 2048)
<5>[1750152.657976] UBI: data offset:                4096
<5>[1750152.766602] UBI: max. sequence number:       534
<5>[1750152.782046] UBI: attached mtd6 to ubi2
<5>[1750152.786023] UBI: MTD device name:            "config"
<5>[1750152.791265] UBI: MTD device size:            15 MiB
<5>[1750152.796340] UBI: number of good PEBs:        120
<5>[1750152.801143] UBI: number of bad PEBs:         0
<5>[1750152.805781] UBI: number of corrupted PEBs:   0
<5>[1750152.810410] UBI: max. allowed volumes:       128
<5>[1750152.815221] UBI: wear-leveling threshold:    4096
<5>[1750152.820112] UBI: number of internal volumes: 1
<5>[1750152.824746] UBI: number of user volumes:     1
<5>[1750152.829375] UBI: available PEBs:             0
<5>[1750152.834022] UBI: total number of reserved PEBs: 120
<5>[1750152.839089] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1750152.845296] UBI: max/mean erase counter: 6/5
<5>[1750152.849750] UBI: image sequence number:  1872325126
<5>[1750152.854843] UBI: background thread "ubi_bgt2d" started, PID 29171
<5>[1750152.980043] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1750152.986270] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1750152.994052] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1750153.001556] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1750153.007589] UBIFS: default compressor: lzo
<5>[1750153.011871] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1750153.216134] UBIFS: un-mount UBI device 2, volume 0
<5>[1750153.282409] UBI: mtd6 is detached from ubi2
<5>[1771752.709766] UBI: attaching mtd6 to ubi2
<5>[1771752.713821] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1771752.720281] UBI: logical eraseblock size:    126976 bytes
<5>[1771752.725874] UBI: smallest flash I/O unit:    2048
<5>[1771752.730765] UBI: VID header offset:          2048 (aligned 2048)
<5>[1771752.737030] UBI: data offset:                4096
<5>[1771752.845037] UBI: max. sequence number:       535
<5>[1771752.860489] UBI: attached mtd6 to ubi2
<5>[1771752.864459] UBI: MTD device name:            "config"
<5>[1771752.869700] UBI: MTD device size:            15 MiB
<5>[1771752.874776] UBI: number of good PEBs:        120
<5>[1771752.879580] UBI: number of bad PEBs:         0
<5>[1771752.884263] UBI: number of corrupted PEBs:   0
<5>[1771752.888893] UBI: max. allowed volumes:       128
<5>[1771752.893770] UBI: wear-leveling threshold:    4096
<5>[1771752.898661] UBI: number of internal volumes: 1
<5>[1771752.903302] UBI: number of user volumes:     1
<5>[1771752.907931] UBI: available PEBs:             0
<5>[1771752.912558] UBI: total number of reserved PEBs: 120
<5>[1771752.917630] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1771752.923837] UBI: max/mean erase counter: 6/5
<5>[1771752.928291] UBI: image sequence number:  1872325126
<5>[1771752.933413] UBI: background thread "ubi_bgt2d" started, PID 32473
<5>[1771753.054477] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1771753.060681] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1771753.068472] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1771753.075987] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1771753.082015] UBIFS: default compressor: lzo
<5>[1771753.086338] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1771753.287788] UBIFS: un-mount UBI device 2, volume 0
<5>[1771753.362529] UBI: mtd6 is detached from ubi2
<5>[1793352.815120] UBI: attaching mtd6 to ubi2
<5>[1793352.819173] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1793352.825707] UBI: logical eraseblock size:    126976 bytes
<5>[1793352.831307] UBI: smallest flash I/O unit:    2048
<5>[1793352.836224] UBI: VID header offset:          2048 (aligned 2048)
<5>[1793352.842427] UBI: data offset:                4096
<5>[1793352.963774] UBI: max. sequence number:       536
<5>[1793352.979263] UBI: attached mtd6 to ubi2
<5>[1793352.983240] UBI: MTD device name:            "config"
<5>[1793352.988482] UBI: MTD device size:            15 MiB
<5>[1793352.993561] UBI: number of good PEBs:        120
<5>[1793352.998370] UBI: number of bad PEBs:         0
<5>[1793353.003005] UBI: number of corrupted PEBs:   0
<5>[1793353.007634] UBI: max. allowed volumes:       128
<5>[1793353.012440] UBI: wear-leveling threshold:    4096
<5>[1793353.017367] UBI: number of internal volumes: 1
<5>[1793353.022012] UBI: number of user volumes:     1
<5>[1793353.026665] UBI: available PEBs:             0
<5>[1793353.031295] UBI: total number of reserved PEBs: 120
<5>[1793353.036372] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1793353.042574] UBI: max/mean erase counter: 6/5
<5>[1793353.047038] UBI: image sequence number:  1872325126
<5>[1793353.052168] UBI: background thread "ubi_bgt2d" started, PID 3497
<5>[1793353.169914] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1793353.176142] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1793353.183924] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1793353.191428] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1793353.197463] UBIFS: default compressor: lzo
<5>[1793353.201745] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1793353.402131] UBIFS: un-mount UBI device 2, volume 0
<5>[1793353.468884] UBI: mtd6 is detached from ubi2
<6>[1797034.963228] PHY: comcerto-0:06 - Link is Down
<6>[1797046.310803] eth0: pfe_eth_close
<6>[1797046.342735] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[1797046.352333] hif_process_client_req: unregister client_id 1
<6>[1797046.358024] pfe_hif_client_unregister
<6>[1797046.392875] eth0: pfe_eth_open
<6>[1797046.396234] hif_process_client_req: register client_id 1
<6>[1797046.401735] pfe_hif_client_register
<6>[1797046.405436] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[1797046.413925] eth0: pfe_gemac_init
<6>[1797046.418702] ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>[1797948.368921] nfsd: last server has exited, flushing export cache
<6>[1797998.498308] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[1797998.597926] eth0: pfe_eth_close
<6>[1797998.632729] hif_lib_client_unregister : client: 9f0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[1797998.642480] hif_process_client_req: unregister client_id 1
<6>[1797998.648211] pfe_hif_client_unregister
<6>[1797998.750533] eth1: pfe_eth_close
<6>[1797998.782766] hif_lib_client_unregister : client: 9fac03a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[1797998.792364] hif_process_client_req: unregister client_id 0
<6>[1797998.798094] pfe_hif_client_unregister
<5>[1798014.930204] UBI: attaching mtd6 to ubi2
<5>[1798014.934261] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1798014.940719] UBI: logical eraseblock size:    126976 bytes
<5>[1798014.946332] UBI: smallest flash I/O unit:    2048
<5>[1798014.951223] UBI: VID header offset:          2048 (aligned 2048)
<5>[1798014.957449] UBI: data offset:                4096
<5>[1798015.065559] UBI: max. sequence number:       537
<5>[1798015.080981] UBI: attached mtd6 to ubi2
<5>[1798015.084961] UBI: MTD device name:            "config"
<5>[1798015.090203] UBI: MTD device size:            15 MiB
<5>[1798015.095278] UBI: number of good PEBs:        120
<5>[1798015.100080] UBI: number of bad PEBs:         0
<5>[1798015.104716] UBI: number of corrupted PEBs:   0
<5>[1798015.109344] UBI: max. allowed volumes:       128
<5>[1798015.114155] UBI: wear-leveling threshold:    4096
<5>[1798015.119044] UBI: number of internal volumes: 1
<5>[1798015.123681] UBI: number of user volumes:     1
<5>[1798015.128309] UBI: available PEBs:             0
<5>[1798015.132945] UBI: total number of reserved PEBs: 120
<5>[1798015.138008] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1798015.144211] UBI: max/mean erase counter: 6/5
<5>[1798015.148666] UBI: image sequence number:  1872325126
<5>[1798015.153761] UBI: background thread "ubi_bgt2d" started, PID 8350
<5>[1798015.273786] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1798015.279997] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1798015.287815] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1798015.295340] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1798015.301374] UBIFS: default compressor: lzo
<5>[1798015.305676] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1798015.846231] UBIFS: un-mount UBI device 2, volume 0
<5>[1798015.908834] UBI: mtd6 is detached from ubi2
[Diagnostic] Fri Apr 3 17:42:28 CEST 2020, 490.40
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000183] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060218] Mount-cache hash table entries: 512
<6>[    0.060720] Initializing cgroup subsys cpuacct
<6>[    0.060749] Initializing cgroup subsys devices
<6>[    0.060782] CPU: Testing write buffer coherency: ok
<6>[    0.060942] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060968] Calibrating local timer... 299.86MHz.
<4>[    0.120064]  Creating cpu1_hotplug_thread....
<4>[    0.120154]  cpu1_hotplug_thread Created
<6>[    0.120170] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121571] CPU1: Booted secondary processor
<6>[    0.180040] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180096] Brought up 2 CPUs
<6>[    0.180109] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180839] devtmpfs: initialized
<6>[    0.182261] xor: measuring software checksum speed
<6>[    0.229991]    arm4regs  :  2128.800 MB/sec
<6>[    0.279966]    8regs     :  1437.600 MB/sec
<6>[    0.329941]    32regs    :  1409.200 MB/sec
<6>[    0.329948] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330124] NET: Registered protocol family 16
<6>[    0.330594] L310 cache controller enabled
<6>[    0.330607] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330686] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330691] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330705] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330713] ARMv7 AUX CTRL(1): 0x41
<6>[    0.331218] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331226] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331241] Power Management Mode Support For C2000: 
<6>[    0.331551] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347146] PCIe0: Link Up Success 
<6>[    0.347153] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347158] comcerto_pcie_rc_int_init
<6>[    0.347199] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338118] PCIe1: Link Up Failed 
<7>[    4.338239] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338299] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338314] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338434] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338533] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338543] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338556] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349992] bio: create slab <bio-0> at 0
<4>[    4.519692] raid6: int32x1     25 MB/s
<4>[    4.687992] raid6: int32x2     48 MB/s
<4>[    4.858458] raid6: int32x4     82 MB/s
<4>[    5.027847] raid6: int32x8    112 MB/s
<4>[    5.027853] raid6: using algorithm int32x8 (112 MB/s)
<6>[    5.028025] vgaarb: loaded
<5>[    5.028324] SCSI subsystem initialized
<7>[    5.028459] libata version 3.00 loaded.
<6>[    5.028644] usbcore: registered new interface driver usbfs
<6>[    5.028716] usbcore: registered new interface driver hub
<6>[    5.028807] usbcore: registered new device driver usb
<6>[    5.029041] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029478] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.029865] Switching to clocksource timer2
<5>[    5.030079] FS-Cache: Loaded
<6>[    5.030206] CacheFiles: Loaded
<6>[    5.031104] NET: Registered protocol family 2
<6>[    5.031301] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.031922] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032104] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032268] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032275] TCP reno registered
<6>[    5.032283] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032313] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032564] NET: Registered protocol family 1
<6>[    5.032841] RPC: Registered named UNIX socket transport module.
<6>[    5.032848] RPC: Registered udp transport module.
<6>[    5.032853] RPC: Registered tcp transport module.
<6>[    5.032858] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.032880] PCI: CLS 32 bytes, default 32
<6>[    6.071767] membuf_init: created membuf device(253, 0)
<6>[    6.072079] audit: initializing netlink socket (disabled)
<5>[    6.072103] type=2000 audit(6.070:1): initialized
<5>[    6.073081] VFS: Disk quotas dquot_6.5.2
<4>[    6.073224] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073849] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.074121] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074797] fuse init (API version 7.17)
<6>[    6.075000] msgmni has been set to 932
<6>[    6.076682] async_tx: api initialized (async)
<6>[    6.076796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076805] io scheduler noop registered
<6>[    6.076810] io scheduler deadline registered
<6>[    6.076885] io scheduler cfq registered (default)
<6>[    6.077195] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.374551] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025121] console [ttyS0] enabled
<6>[    7.134510] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231255] brd: module loaded
<6>[    7.320577] loop: module loaded
<6>[    7.325106] nbd: registered device at major 43
<6>[    7.334841] SCSI Media Changer driver v0.25 
<7>[    7.339226] ahci 0000:00:00.0: version 3.0
<4>[    7.339243] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345001] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352031] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.357567] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.365693] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.374751] scsi0 : ahci
<6>[    7.377666] scsi1 : ahci
<6>[    7.380390] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.387723] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395197] SATA Serdes: 48Mhz ref clk
<6>[    7.399440] Serdes2: Lane OK Passed
<4>[    7.402956] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.407642] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415418] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.423997] scsi2 : ahci_platform
<6>[    7.427540] scsi3 : ahci_platform
<6>[    7.431024] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.438966] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.447819] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457191] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465088] Fixed MDIO Bus: probed
<6>[    7.468552] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.672746] Core Release: 2.81a
<4>[    7.675898] Setting default values for core params
<6>[    7.789907] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.795363] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.880483] Using Buffer DMA mode
<4>[    7.883807] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.889654] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895248] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.899649] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904451] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904465] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904492] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.911588] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.916977] Init: Port Power? op_state=1
<4>[    7.920917] Init: Power Port (0)
<7>[    7.924185] usb usb1: default language 0x0409
<7>[    7.924202] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938270] usb usb1: Product: DWC OTG Controller
<6>[    7.939922] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.949202] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.954547] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.958935] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.965759] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.973349] usb usb1: usb_probe_device
<7>[    7.973358] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.973382] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.973470] hub 1-0:1.0: usb_probe_interface
<7>[    7.973477] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.973484] hub 1-0:1.0: USB hub found
<6>[    7.973691] ata1.00: configured for UDMA/133
<6>[    7.981551] hub 1-0:1.0: 1 port detected
<7>[    7.985485] hub 1-0:1.0: standalone hub
<7>[    7.985490] hub 1-0:1.0: ganged power switching
<7>[    7.985495] hub 1-0:1.0: individual port over-current protection
<7>[    7.985501] hub 1-0:1.0: Single TT
<7>[    7.985508] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.985515] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.985528] hub 1-0:1.0: local power source is good
<7>[    7.985535] hub 1-0:1.0: enabling power on all ports
<7>[    7.985910] drivers/usb/core/inode.c: creating file '001'
<5>[    7.986007] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<7>[    7.986047] Module dwc_common_port init
<6>[    7.994144] ata1.00: set queue depth = 31
<4>[    7.998339] Check proc_name[ahci].
<5>[    8.002055] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.002095] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    8.002315] mousedev: PS/2 mouse device common for all mice
<6>[    8.002518] i2c /dev entries driver
<4>[    8.002612] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.002942] comcerto_wdt: support registered
<6>[    8.002974] md: linear personality registered for level -1
<6>[    8.002979] md: raid0 personality registered for level 0
<6>[    8.002984] md: raid1 personality registered for level 1
<6>[    8.002989] md: raid10 personality registered for level 10
<6>[    8.002995] md: raid6 personality registered for level 6
<6>[    8.002999] md: raid5 personality registered for level 5
<6>[    8.003004] md: raid4 personality registered for level 4
<6>[    8.003009] md: multipath personality registered for level -4
<5>[    8.079449] sd 0:0:0:0: [sda] 4096-byte physical blocks
<4>[    8.084826] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.084830] 
<6>[    8.084964] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.101757] dm_crypt using the OCF for crypto acceleration.
<7>[    8.101797] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<5>[    8.102009] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.102017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.102079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.121549] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.127055] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.133624] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.140267] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.151218] ALSA device list:
<6>[    8.154198]   No soundcards found.
<6>[    8.158245] TCP cubic registered
<6>[    8.161505] NET: Registered protocol family 17
<6>[    8.165986] NET: Registered protocol family 15
<6>[    8.170449] Initializing NETLINK_KEY socket
<6>[    8.174654] NET: Registered protocol family 5
<6>[    8.179235] lib80211: common routines for IEEE802.11 drivers
<7>[    8.184960] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.184967] Registering the dns_resolver key type
<6>[    8.189746] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.192918]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.201605] Clocks: disabled unused pll2
<5>[    8.202271] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.210172] Clocks: disabled unused uart
<6>[    8.214104] Clocks: disabled unused gemtx
<6>[    8.218123] Clocks: disabled unused ipsec_spacc
<6>[    8.222670] Clocks: disabled unused dpi_cie
<6>[    8.226863] Clocks: disabled unused dpi_decomp
<6>[    8.231326] Clocks: disabled unused ntgref
<6>[    8.235432] Clocks: disabled unused pcie1
<6>[    8.239451] Clocks: disabled unused usb1
<6>[    8.243388] Clocks: disabled unused ext_phy0
<6>[    8.247668] Clocks: disabled unused ext_phy1
<6>[    8.251953] Clocks: disabled unused ext_phy2
<6>[    8.256232] Clocks: disabled unused tpi
<6>[    8.260081] Clocks: disabled unused csys
<6>[    8.264013] Clocks: disabled unused tsuntg
<6>[    8.268119] Clocks: disabled unused sata_occ
<6>[    8.272404] Clocks: disabled unused pcie_occ
<6>[    8.276684] Clocks: disabled unused sgmii_occ
<7>[    8.289939] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.289961] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.289965] 
<7>[    8.298448] hub 1-0:1.0: over-current change on port 1
<7>[    8.399945] hub 1-0:1.0: enabling power on all ports
<4>[    8.482036] Registering CPUFreq(comcerto)
<4>[    8.486338] Please be patient, while OpenWrt loads ...
<6>[    8.629926] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.636753] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.643577] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.651482] ata2.00: configured for UDMA/133
<5>[    8.656144] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.664283] ata2.00: set queue depth = 31
<4>[    8.668497] Check proc_name[ahci].
<5>[    8.672137] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.672244] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.685334] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.690840] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.695648] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.695722] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.761266]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.766649] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.788814] Freeing init memory: 13476K
<6>[    9.301244] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.307978] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.569008] RTC_TIME:Fri Apr  3 17:34:28 2020  0.000000 seconds
<6>[    9.599996] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.604648] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.610592] Creating 2 MTD partitions on "spi0.0":
<5>[    9.615400] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.621154] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.631468] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.638554] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.643751] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.652393] Using default values for hw ecc
<4>[    9.660007] Bad block table not found for chip 0
<4>[    9.668008] Bad block table not found for chip 0
<6>[    9.672645] Scanning device for bad blocks
<4>[    9.677790] Bad eraseblock 18 at 0x000000240000
<4>[    9.685277] Bad eraseblock 72 at 0x000000900000
<4>[    9.704948] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.711268] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.742122] Bad eraseblock 863 at 0x000006be0000
<4>[    9.767750] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.787490] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.935281] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.944829] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.951153] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.957611] Creating 5 MTD partitions on "comcertonand":
<5>[    9.962951] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.969255] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.975638] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.981834] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.988183] 0x00001f000000-0x00001ff00000 : "config"
<6>[   10.001245] usbcore: registered new interface driver usbhid
<6>[   10.006835] usbhid: USB HID core driver
<6>[   10.016353] usbcore: registered new interface driver usblp
<6>[   10.028948] ## xhci_plat_probe
<6>[   10.032061] ### comcerto_start_xhci
<6>[   10.035570] USB3.0 clock selected: internal
<6>[   10.043019] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.047929] drivers/usb/core/inode.c: creating file '002'
<6>[   10.047949] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.055176] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.060552] usb usb2: default language 0x0409
<7>[   10.060572] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.060579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.067386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.074637] usb usb2: Product: xHCI Host Controller
<6>[   10.079527] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.084944] usb usb2: SerialNumber: xhci-hcd
<7>[   10.089485] usb usb2: usb_probe_device
<7>[   10.089495] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.089506] xHCI xhci_add_endpoint called for root hub
<7>[   10.089513] xHCI xhci_check_bandwidth called for root hub
<7>[   10.089533] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.089623] hub 2-0:1.0: usb_probe_interface
<7>[   10.089630] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.089637] hub 2-0:1.0: USB hub found
<6>[   10.093443] hub 2-0:1.0: 1 port detected
<7>[   10.097377] hub 2-0:1.0: standalone hub
<7>[   10.097383] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.097389] hub 2-0:1.0: individual port over-current protection
<7>[   10.097395] hub 2-0:1.0: Single TT
<7>[   10.097401] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.097409] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.097423] hub 2-0:1.0: local power source is good
<7>[   10.097430] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.097589] drivers/usb/core/inode.c: creating file '001'
<6>[   10.097660] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.102575] drivers/usb/core/inode.c: creating file '003'
<6>[   10.102589] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.109688] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.109699] usb usb3: default language 0x0409
<7>[   10.109717] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.109724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.116541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.123788] usb usb3: Product: xHCI Host Controller
<6>[   10.128677] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.134094] usb usb3: SerialNumber: xhci-hcd
<7>[   10.138601] usb usb3: usb_probe_device
<7>[   10.138610] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.138619] xHCI xhci_add_endpoint called for root hub
<7>[   10.138625] xHCI xhci_check_bandwidth called for root hub
<7>[   10.138642] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.138732] hub 3-0:1.0: usb_probe_interface
<7>[   10.138738] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.138744] hub 3-0:1.0: USB hub found
<6>[   10.142525] hub 3-0:1.0: 1 port detected
<7>[   10.146458] hub 3-0:1.0: standalone hub
<7>[   10.146463] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.146469] hub 3-0:1.0: individual port over-current protection
<7>[   10.146476] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.146483] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.146495] hub 3-0:1.0: local power source is good
<7>[   10.146501] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.146642] drivers/usb/core/inode.c: creating file '001'
<6>[   10.154122] Initializing USB Mass Storage driver...
<6>[   10.159125] usbcore: registered new interface driver usb-storage
<6>[   10.165168] USB Mass Storage support registered.
<7>[   10.189948] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.239956] hub 3-0:1.0: port 1: status 0203 change 0031
<7>[   10.289973] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.290009] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.409950] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.432516] usb 2-1: default language 0x0409
<7>[   10.433096] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.433105] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.439838] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.447023] usb 2-1: Product: USB2.0 Hub
<6>[   10.450970] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.455769] usb 2-1: usb_probe_device
<7>[   10.455781] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.461706] usb 2-1: Successful Endpoint Configure command
<7>[   10.461941] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.462080] hub 2-1:1.0: usb_probe_interface
<7>[   10.462089] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.462097] hub 2-1:1.0: USB hub found
<6>[   10.466102] hub 2-1:1.0: 4 ports detected
<7>[   10.470168] hub 2-1:1.0: standalone hub
<7>[   10.470175] hub 2-1:1.0: individual port power switching
<7>[   10.470181] hub 2-1:1.0: individual port over-current protection
<7>[   10.493713] usb 2-1: Successful Endpoint Configure command
<7>[   10.494120] hub 2-1:1.0: TT per port
<7>[   10.494131] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.494140] hub 2-1:1.0: Port indicators are supported
<7>[   10.494148] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.494531] usb 2-1: Successful Endpoint Configure command
<7>[   10.494761] hub 2-1:1.0: local power source is good
<7>[   10.494772] hub 2-1:1.0: enabling power on all ports
<7>[   10.495665] drivers/usb/core/inode.c: creating file '002'
<7>[   10.495760] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.495784] hub 3-0:1.0: reset change on port 1
<7>[   10.495803] hub 3-0:1.0: port 1, status 0203, change 0010, 5.0 Gb/s
<4>[   10.551945] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.558331] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<7>[   10.590820] hub 2-1:1.0: port 4: status 0301 change 0001
<4>[   10.600104] flashcache: flashcache-1.0-dummy initialized
<6>[   10.610096] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.631904] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.632082] usb 3-1: default language 0x0409
<7>[   10.632624] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.632632] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.639355] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.646539] usb 3-1: Product: USB3.0 Hub
<6>[   10.650486] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.655278] usb 3-1: usb_probe_device
<7>[   10.655289] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.669685] usb 3-1: Successful Endpoint Configure command
<7>[   10.669871] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.670295] hub 3-1:1.0: usb_probe_interface
<7>[   10.670304] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.670311] hub 3-1:1.0: USB hub found
<6>[   10.674356] hub 3-1:1.0: 4 ports detected
<7>[   10.678379] hub 3-1:1.0: standalone hub
<7>[   10.678385] hub 3-1:1.0: individual port power switching
<7>[   10.678391] hub 3-1:1.0: individual port over-current protection
<7>[   10.678398] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.678405] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.678605] usb 3-1: Successful Endpoint Configure command
<7>[   10.678749] hub 3-1:1.0: local power source is good
<7>[   10.678870] hub 3-1:1.0: enabling power on all ports
<7>[   10.679635] drivers/usb/core/inode.c: creating file '002'
<7>[   10.689959] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.690131] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.747754] UBI: attaching mtd3 to ubi0
<5>[   10.751625] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.757908] UBI: logical eraseblock size:    126976 bytes
<5>[   10.763326] UBI: smallest flash I/O unit:    2048
<5>[   10.768042] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.774074] UBI: data offset:                4096
<6>[   10.774246] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<7>[   10.794015] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.794576] usb 2-1.4: default language 0x0409
<7>[   10.802207] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.802216] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.809113] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.816456] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.823355] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.829204] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.834369] usb 2-1.4: usb_probe_device
<7>[   10.834380] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.834445] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.845664] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.846305] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.846421] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.846429] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.173176] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.173332] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.189102] drivers/usb/core/inode.c: creating file '003'
<7>[   11.189183] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.261607] UBI: max. sequence number:       2
<5>[   12.278396] UBI: attached mtd3 to ubi0
<5>[   12.282184] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.287858] UBI: MTD device size:            216 MiB
<5>[   12.292840] UBI: number of good PEBs:        1723
<5>[   12.297555] UBI: number of bad PEBs:         5
<5>[   12.302015] UBI: number of corrupted PEBs:   0
<5>[   12.306469] UBI: max. allowed volumes:       128
<5>[   12.311102] UBI: wear-leveling threshold:    4096
<5>[   12.315817] UBI: number of internal volumes: 1
<5>[   12.320276] UBI: number of user volumes:     1
<5>[   12.324729] UBI: available PEBs:             0
<5>[   12.329182] UBI: total number of reserved PEBs: 1723
<5>[   12.334162] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.340276] UBI: max/mean erase counter: 25/16
<5>[   12.344730] UBI: image sequence number:  1486693232
<5>[   12.349632] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.471795] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.477907] UBIFS: mounted read-only
<5>[   12.481513] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.489540] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.496878] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.502732] UBIFS: default compressor: lzo
<5>[   12.506839] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.872202] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.919028] UBI: mtd3 is detached from ubi0
<6>[   33.932038] usbcore: registered new interface driver usbserial
<6>[   33.937890] usbserial: USB Serial Driver core
<6>[   33.947797] USB Serial support registered for pl2303
<6>[   33.952895] usbcore: registered new interface driver pl2303
<6>[   33.958483] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.970396] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.984155] ufsd: module license 'Commercial product' taints kernel.
<4>[   33.990556] Disabling lock debugging due to kernel taint
<5>[   34.016944] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.016950] NTFSJ support included
<5>[   34.016952] exFAT support included
<5>[   34.016954] Hfs+J support included
<5>[   34.016957] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.044202] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.048658] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.322178] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.331541] udev: starting version 140
<6>[   34.338304] pfe_module_init
<6>[   34.341191] pfe_platform_probe
<6>[   34.345288] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.351113] pfe_probe
<6>[   34.353391] PFE Driver version:
<6>[   34.353394] pfe_ctrl_10_00_4
<6>[   34.353396] built with pfe sources version: pfe_10_00_3
<6>[   34.364667] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.374264] pfe_hw_init
<6>[   34.376715] CLASS version: 20
<6>[   34.379688] TMU version: 1011231
<6>[   34.382928] BMU1 version: 21
<6>[   34.385814] BMU2 version: 21
<6>[   34.388700] EMAC1 network cfg: 80000
<6>[   34.392287] EMAC2 network cfg: 80000
<6>[   34.395870] EMAC3 network cfg: 80000
<6>[   34.399452] EGPI1 version: 50
<6>[   34.402429] EGPI2 version: 50
<6>[   34.405403] EGPI3 version: 50
<6>[   34.408376] HGPI version: 50
<6>[   34.411267] GPT version: 0
<6>[   34.413978] HIF version: 10
<6>[   34.416777] HIF NOPCY version: 10
<6>[   34.420102] UTIL version: 20
<6>[   34.422989] bmu_init(1) done
<6>[   34.425877] bmu_init(2) done
<6>[   34.435220] class_init() done
<6>[   34.438198] tmu_init: mem init
<6>[   34.441264] tmu_init: lmem init
<6>[   34.444456] tmu_init() done
<6>[   34.447255] util_init() done
<6>[   34.450148] gpi_init(1) done
<6>[   34.453036] gpi_init(2) done
<6>[   34.455924] gpi_init(3) done
<6>[   34.458812] gpi_init(hif) done
<6>[   34.461877] bmu_enable(1) done
<6>[   34.464938] bmu_enable(2) done
<6>[   34.467999] pfe_hif_lib_init
<6>[   34.471060] pfe_hif_init
<6>[   34.473599] pfe_hif_alloc_descr
<6>[   34.476847] pfe_hif_init_buffers
<6>[   34.480213] pfe_firmware_init
<6>[   34.642331] pfe_load_elf
<3>[   34.644886] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.676475] PFE binary version: pfe_10_00_3
<6>[   34.680704] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.687162] pfe_load_elf
<6>[   34.691106] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.696432] pfe_load_elf
<6>[   34.700767] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.706304] pfe_ctrl_init
<6>[   34.727065] pfe_ctrl_init finished
<6>[   34.727071] pfe_ctrl_timer
<6>[   34.733220] pfe_eth_init
<6>[   34.744577] Comcerto MDIO Bus: probed
<6>[   34.749530] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.758060] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.764913] pfe_vwd_init
<6>[   34.767555] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.772557] pfe_vwd_driver_init: start
<4>[   34.776321] pfe_vwd_up: start
<6>[   34.779343] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.786432] pfe_vwd_driver_init: end
<6>[   34.790026] pfe_pcap_init
<6>[   34.832076] eth0: pfe_eth_open
<6>[   34.835296] hif_process_client_req: register client_id 0
<6>[   34.840651] pfe_hif_client_register
<6>[   34.844181] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.852495] eth0: pfe_gemac_init
<6>[   34.858356] eth0: pfe_eth_close
<6>[   34.899913] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.909336] hif_process_client_req: unregister client_id 0
<6>[   34.914844] pfe_hif_client_unregister
<6>[   34.919006] eth1: pfe_eth_open
<6>[   34.922206] hif_process_client_req: register client_id 1
<6>[   34.927533] pfe_hif_client_register
<6>[   34.931041] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.939330] eth1: pfe_gemac_init
<6>[   34.943205] eth1: pfe_eth_close
<6>[   34.979903] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.989323] hif_process_client_req: unregister client_id 1
<6>[   34.994830] pfe_hif_client_unregister
<6>[   35.447292] kjournald starting.  Commit interval 5 seconds
<6>[   35.452852] EXT3-fs (sda1): using internal journal
<6>[   35.457663] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.882138] kjournald starting.  Commit interval 5 seconds
<6>[   35.886991] EXT3-fs (sda1): using internal journal
<6>[   35.887002] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.333092] kjournald starting.  Commit interval 5 seconds
<6>[   36.338622] EXT3-fs (sdb1): using internal journal
<6>[   36.343456] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.728569] md: md9 stopped.
<6>[   36.734323] md: bind<sdb1>
<6>[   36.737361] md: bind<sda1>
<6>[   36.743158] bio: create slab <bio-1> at 1
<6>[   36.747374] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.752994] created bitmap (1 pages) for device md9
<6>[   36.758060] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.880163] md9: detected capacity change from 0 to 542769152
<6>[   37.939991]  md9: unknown partition table
<6>[   38.193595] kjournald starting.  Commit interval 5 seconds
<6>[   38.206600] EXT3-fs (md9): using internal journal
<6>[   38.211355] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.566465] md: md13 stopped.
<6>[   38.574712] md: bind<sdb4>
<6>[   38.577726] md: bind<sda4>
<6>[   38.583591] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.589251] created bitmap (1 pages) for device md13
<6>[   38.594435] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.681050] md13: detected capacity change from 0 to 469893120
<4>[   59.629987] set stripe cache size 1024
<4>[   59.634356] STRIPE_CACHE_SIZE is 1024
<6>[   60.657574] md: bind<sda2>
<6>[   60.673074] md: bind<sdb2>
<6>[   60.678912] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   60.684654] created bitmap (1 pages) for device md256
<6>[   60.689949] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   60.717839] md256: detected capacity change from 0 to 542834688
<6>[   60.796001]  md256: unknown partition table
<6>[   60.867864] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   61.324131] md: bind<sda5>
<6>[   61.327076] md: bind<sdb5>
<6>[   61.332923] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   61.338612] created bitmap (1 pages) for device md322
<6>[   61.343953] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   61.384672] md322: detected capacity change from 0 to 7408779264
<6>[   61.446923]  md322: unknown partition table
<6>[   61.518150] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   61.870639]  md13: unknown partition table
<6>[   62.299630] md: md1 stopped.
<6>[   62.315273] md: bind<sdb3>
<6>[   62.318264] md: bind<sda3>
<6>[   62.324135] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   62.329542] md1: detected capacity change from 0 to 5990981238784
<6>[   62.400507]  md1: unknown partition table
<6>[   73.068173] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   80.133379] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   84.006783] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   85.051509] [S30mountall] start
<5>[   85.483344] UBI: attaching mtd3 to ubi0
<5>[   85.487196] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   85.493517] UBI: logical eraseblock size:    126976 bytes
<5>[   85.498930] UBI: smallest flash I/O unit:    2048
<5>[   85.503665] UBI: VID header offset:          2048 (aligned 2048)
<5>[   85.509686] UBI: data offset:                4096
<5>[   86.992762] UBI: max. sequence number:       2
<5>[   87.009719] UBI: attached mtd3 to ubi0
<5>[   87.013516] UBI: MTD device name:            "boot1_rootfs2"
<5>[   87.019190] UBI: MTD device size:            216 MiB
<5>[   87.024174] UBI: number of good PEBs:        1723
<5>[   87.028889] UBI: number of bad PEBs:         5
<5>[   87.033348] UBI: number of corrupted PEBs:   0
<5>[   87.037802] UBI: max. allowed volumes:       128
<5>[   87.042437] UBI: wear-leveling threshold:    4096
<5>[   87.047151] UBI: number of internal volumes: 1
<5>[   87.051609] UBI: number of user volumes:     1
<5>[   87.056063] UBI: available PEBs:             0
<5>[   87.060521] UBI: total number of reserved PEBs: 1723
<5>[   87.065497] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   87.071610] UBI: max/mean erase counter: 25/16
<5>[   87.076064] UBI: image sequence number:  1486693232
<5>[   87.080968] UBI: background thread "ubi_bgt0d" started, PID 1603
<5>[   87.210623] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   87.216737] UBIFS: mounted read-only
<5>[   87.220335] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   87.228362] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   87.235697] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   87.241548] UBIFS: default compressor: lzo
<5>[   87.245655] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  109.589621] UBIFS: un-mount UBI device 0, volume 0
<5>[  109.659268] UBI: mtd3 is detached from ubi0
<5>[  110.024737] UBI: attaching mtd3 to ubi0
<5>[  110.028590] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  110.034895] UBI: logical eraseblock size:    126976 bytes
<5>[  110.040325] UBI: smallest flash I/O unit:    2048
<5>[  110.045042] UBI: VID header offset:          2048 (aligned 2048)
<5>[  110.051069] UBI: data offset:                4096
<5>[  111.532966] UBI: max. sequence number:       2
<5>[  111.549822] UBI: attached mtd3 to ubi0
<5>[  111.553610] UBI: MTD device name:            "boot1_rootfs2"
<5>[  111.559284] UBI: MTD device size:            216 MiB
<5>[  111.564265] UBI: number of good PEBs:        1723
<5>[  111.568980] UBI: number of bad PEBs:         5
<5>[  111.573443] UBI: number of corrupted PEBs:   0
<5>[  111.577897] UBI: max. allowed volumes:       128
<5>[  111.582529] UBI: wear-leveling threshold:    4096
<5>[  111.587244] UBI: number of internal volumes: 1
<5>[  111.591701] UBI: number of user volumes:     1
<5>[  111.596155] UBI: available PEBs:             0
<5>[  111.600613] UBI: total number of reserved PEBs: 1723
<5>[  111.605589] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  111.611701] UBI: max/mean erase counter: 25/16
<5>[  111.616155] UBI: image sequence number:  1486693232
<5>[  111.621060] UBI: background thread "ubi_bgt0d" started, PID 1736
<5>[  111.750800] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  111.756913] UBIFS: mounted read-only
<5>[  111.760512] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  111.768539] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  111.775878] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  111.781731] UBIFS: default compressor: lzo
<5>[  111.785838] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  111.864140] UBIFS: un-mount UBI device 0, volume 0
<5>[  111.919212] UBI: mtd3 is detached from ubi0
<6>[  112.151046] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  129.878877] UBI: attaching mtd6 to ubi2
<5>[  129.882773] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  129.889058] UBI: logical eraseblock size:    126976 bytes
<5>[  129.894487] UBI: smallest flash I/O unit:    2048
<5>[  129.899206] UBI: VID header offset:          2048 (aligned 2048)
<5>[  129.905242] UBI: data offset:                4096
<5>[  130.185327] UBI: max. sequence number:       538
<5>[  130.223406] UBI: attached mtd6 to ubi2
<5>[  130.227170] UBI: MTD device name:            "config"
<5>[  130.232268] UBI: MTD device size:            15 MiB
<5>[  130.237173] UBI: number of good PEBs:        120
<5>[  130.241840] UBI: number of bad PEBs:         0
<5>[  130.246307] UBI: number of corrupted PEBs:   0
<5>[  130.250792] UBI: max. allowed volumes:       128
<5>[  130.255422] UBI: wear-leveling threshold:    4096
<5>[  130.260149] UBI: number of internal volumes: 1
<5>[  130.264604] UBI: number of user volumes:     1
<5>[  130.269061] UBI: available PEBs:             0
<5>[  130.273552] UBI: total number of reserved PEBs: 120
<5>[  130.278444] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  130.284488] UBI: max/mean erase counter: 6/5
<5>[  130.288770] UBI: image sequence number:  1872325126
<5>[  130.294304] UBI: background thread "ubi_bgt2d" started, PID 2183
<5>[  130.483590] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  130.489622] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  130.497249] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  130.504597] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  130.510453] UBIFS: default compressor: lzo
<5>[  130.514565] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  131.174600] UBIFS: un-mount UBI device 2, volume 0
<5>[  131.274612] UBI: mtd6 is detached from ubi2
<4>[  131.752796] [S30mountall] end
<4>[  131.757051] [S31init_hardware] start
<6>[  131.905362] sysinfo: Module loaded.
<6>[  132.468341] fnotify: Load file notify kernel module.
<6>[  133.793954] usbcore: registered new interface driver snd-usb-audio
<6>[  133.810050] usbcore: registered new interface driver snd-usb-caiaq
<6>[  133.834645] Linux video capture interface: v2.00
<6>[  133.912905] usbcore: registered new interface driver uvcvideo
<6>[  133.918678] USB Video Class driver (1.1.1)
<6>[  134.137863] NET: Registered protocol family 10
<4>[  137.088241] [S31init_hardware] end
<4>[  137.092369] [S32init_mac_addr] start
<6>[  138.234221] eth0: pfe_eth_open
<6>[  138.237421] hif_process_client_req: register client_id 1
<6>[  138.242766] pfe_hif_client_register
<6>[  138.246277] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  138.254597] eth0: pfe_gemac_init
<6>[  138.258404] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  138.875412] eth1: pfe_eth_open
<6>[  138.878613] hif_process_client_req: register client_id 0
<6>[  138.883954] pfe_hif_client_register
<6>[  138.887466] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  138.895763] eth1: pfe_gemac_init
<6>[  138.899567] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  141.210076] [S32init_mac_addr] end
<4>[  141.214076] [S33sysinit] start
<6>[  141.250128] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  141.255569] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  152.729913] eth0: no IPv6 routers present
<5>[  162.561351] UBI: attaching mtd6 to ubi2
<5>[  162.565204] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  162.571506] UBI: logical eraseblock size:    126976 bytes
<5>[  162.576919] UBI: smallest flash I/O unit:    2048
<5>[  162.581641] UBI: VID header offset:          2048 (aligned 2048)
<5>[  162.587662] UBI: data offset:                4096
<5>[  162.695420] UBI: max. sequence number:       541
<5>[  162.710742] UBI: attached mtd6 to ubi2
<5>[  162.714509] UBI: MTD device name:            "config"
<5>[  162.719574] UBI: MTD device size:            15 MiB
<5>[  162.724482] UBI: number of good PEBs:        120
<5>[  162.729110] UBI: number of bad PEBs:         0
<5>[  162.733569] UBI: number of corrupted PEBs:   0
<5>[  162.738023] UBI: max. allowed volumes:       128
<5>[  162.742655] UBI: wear-leveling threshold:    4096
<5>[  162.747376] UBI: number of internal volumes: 1
<5>[  162.751887] UBI: number of user volumes:     1
<5>[  162.756354] UBI: available PEBs:             0
<5>[  162.760825] UBI: total number of reserved PEBs: 120
<5>[  162.765716] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  162.771751] UBI: max/mean erase counter: 6/5
<5>[  162.776032] UBI: image sequence number:  1872325126
<5>[  162.780992] UBI: background thread "ubi_bgt2d" started, PID 2841
<5>[  162.907898] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  162.913942] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  162.921540] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  162.928870] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  162.934722] UBIFS: default compressor: lzo
<5>[  162.938829] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  162.959260] UBIFS: un-mount UBI device 2, volume 0
<6>[  231.250108] PHY: comcerto-0:06 - Link is Down
<6>[  232.250129] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[  236.137017] [S33sysinit] end
<4>[  236.140541] [S34shutdown_check] start
<4>[  236.422909] [S34shutdown_check] end
<4>[  236.427200] [S35init_disk] start
<5>[  236.723885] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  236.729929] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  236.737521] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  236.744859] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  236.750718] UBIFS: default compressor: lzo
<5>[  236.754825] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  236.880443] UBIFS: un-mount UBI device 2, volume 0
<5>[  236.925856] UBI: mtd6 is detached from ubi2
<4>[  238.462283] [S35init_disk] end
<4>[  238.466012] [S40init_network] start
<4>[  238.479330] [S40init_network] end
<4>[  238.483361] [S42hostname] start
<4>[  238.935638] [S42hostname] end
<4>[  238.939279] [S45network] start
<5>[  248.978970] Bridge firewalling registered
<6>[  249.524574] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  249.531768] bonding: MII link monitoring set to 100 ms
<6>[  257.296690] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  266.688706] [S45network] end
<4>[  266.692285] [S46iSCSItrgt] start
<4>[  272.307850] [S46iSCSItrgt] end
<4>[  272.311526] [S46iscsiinit] start
<6>[  272.350242] Loading iSCSI transport class v2.0-870.
<5>[  272.380067] iscsi: registered transport (tcp)
<4>[  273.791744] [S46iscsiinit] end
<4>[  273.795365] [S55urandom] start
<4>[  273.827333] [S55urandom] end
<4>[  273.830855] [S56mariadb] start
<4>[  280.270474] [S56mariadb] end
<4>[  280.273945] [S56start_service] start
<4>[  280.362691] [S56start_service] end
<4>[  280.366661] [S57init_qpkg] start
<4>[  405.868370] [S57init_qpkg] end
<4>[  405.872118] [S57ldap] start
<4>[  405.911714] [S57ldap] end
<4>[  405.914887] [S58dbus] start
<4>[  408.147122] [S58dbus] end
<4>[  408.150382] [S58nsswitch] start
<4>[  408.344620] [S58nsswitch] end
<4>[  408.348145] [S58printer] start
<4>[  408.443188] [S58printer] end
<4>[  413.450514] [S59Qthttpd] start
<4>[  420.206507] ==== memory usage ====
<4>[  420.232954] MemTotal:         490756 kB
<4>[  420.236863] MemFree:           76600 kB
<4>[  420.240902] Buffers:           18784 kB
<4>[  420.244772] Cached:           278356 kB
<4>[  420.248635] SwapCached:            4 kB
<4>[  420.252536] Active:           102412 kB
<4>[  420.256409] Inactive:         259604 kB
<4>[  420.260394] Active(anon):      50324 kB
<4>[  420.264285] Inactive(anon):    59696 kB
<4>[  420.268157] Active(file):      52088 kB
<4>[  420.272056] Inactive(file):   199908 kB
<4>[  420.275921] Unevictable:        2012 kB
<4>[  420.279783] Mlocked:            2012 kB
<4>[  420.283698] SwapTotal:      24542452 kB
<4>[  420.287592] SwapFree:       24542404 kB
<4>[  420.291506] Dirty:                24 kB
<4>[  420.295403] Writeback:             0 kB
<4>[  420.299269] AnonPages:         66860 kB
<4>[  420.303166] Mapped:            16204 kB
<4>[  420.307034] Shmem:             45008 kB
<4>[  420.310979] Slab:              34464 kB
<4>[  420.314871] SReclaimable:      22240 kB
<4>[  420.318748] SUnreclaim:        12224 kB
<4>[  420.327228] KernelStack:        1776 kB
<4>[  420.331204] PageTables:         1352 kB
<4>[  420.335070] NFS_Unstable:          0 kB
<4>[  420.338943] Bounce:                0 kB
<4>[  420.342843] WritebackTmp:          0 kB
<4>[  420.346705] CommitLimit:    24787828 kB
<4>[  420.351174] Committed_AS:    1039228 kB
<4>[  420.355067] VmallocTotal:    1302528 kB
<4>[  420.358944] VmallocUsed:       61368 kB
<4>[  420.362855] VmallocChunk:    1212348 kB
<4>[  420.393112] Node 0, zone      DMA
<4>[  420.396462]   pages free     10979
<4>[  420.399954]         min      366
<4>[  420.403216]         low      457
<4>[  420.406473]         high     549
<4>[  420.409725]         scanned  0
<4>[  420.412839]         spanned  11264
<4>[  420.416347]         present  11154
<4>[  420.420581]     nr_free_pages 10979
<4>[  420.424121]     nr_inactive_anon 0
<4>[  420.427556]     nr_active_anon 0
<4>[  420.430851]     nr_inactive_file 0
<4>[  420.434280]     nr_active_file 0
<4>[  420.437532]     nr_unevictable 0
<4>[  420.440807]     nr_mlock     0
<4>[  420.443984]     nr_anon_pages 0
<4>[  420.447948]     nr_mapped    0
<4>[  420.451100]     nr_file_pages 0
<4>[  420.454281]     nr_dirty     0
<4>[  420.457359]     nr_writeback 0
<4>[  420.460459]     nr_slab_reclaimable 0
<4>[  420.464176]     nr_slab_unreclaimable 0
<4>[  420.468097]     nr_page_table_pages 0
<4>[  420.471952]     nr_kernel_stack 0
<4>[  420.477384]     nr_unstable  0
<4>[  420.480528]     nr_bounce    0
<4>[  420.483625]     nr_vmscan_write 0
<4>[  420.486975]     nr_vmscan_immediate_reclaim 0
<4>[  420.491392]     nr_writeback_temp 0
<4>[  420.494911]     nr_isolated_anon 0
<4>[  420.498335]     nr_isolated_file 0
<4>[  420.501783]     nr_shmem     0
<4>[  420.504867]     nr_dirtied   0
<4>[  420.507941]     nr_written   0
<4>[  420.511036]     nr_anon_transparent_hugepages 0
<4>[  420.515617]         protection: (0, 443, 443)
<4>[  420.521563]   pagesets
<4>[  420.523972]     cpu: 0
<4>[  420.526362]               count: 1
<4>[  420.530919]               high:  6
<4>[  420.534366]               batch: 1
<4>[  420.538822]   vm stats threshold: 4
<4>[  420.542400]     cpu: 1
<4>[  420.544786]               count: 0
<4>[  420.549294]               high:  6
<4>[  420.552845]               batch: 1
<4>[  420.558004]   vm stats threshold: 4
<4>[  420.561642]   all_unreclaimable: 0
<4>[  420.565095]   start_pfn:         0
<4>[  420.568526]   inactive_ratio:    1
<4>[  420.571969] Node 0, zone   Normal
<4>[  420.575327]   pages free     8134
<4>[  420.579476]         min      3729
<4>[  420.582887]         low      4661
<4>[  420.587389]         high     5593
<4>[  420.590808]         scanned  0
<4>[  420.593930]         spanned  119808
<4>[  420.598524]         present  113518
<4>[  420.602099]     nr_free_pages 8134
<4>[  420.606563]     nr_inactive_anon 14924
<4>[  420.610396]     nr_active_anon 12503
<4>[  420.615147]     nr_inactive_file 49951
<4>[  420.618943]     nr_active_file 13048
<4>[  420.623600]     nr_unevictable 503
<4>[  420.627054]     nr_mlock     503
<4>[  420.632323]     nr_anon_pages 16639
<4>[  420.635854]     nr_mapped    4051
<4>[  420.641713]     nr_file_pages 74286
<4>[  420.646540]     nr_dirty     6
<4>[  420.649653]     nr_writeback 0
<4>[  420.652793]     nr_slab_reclaimable 5560
<4>[  420.657816]     nr_slab_unreclaimable 3056
<4>[  420.662070]     nr_page_table_pages 319
<4>[  420.665991]     nr_kernel_stack 222
<4>[  420.669523]     nr_unstable  0
<4>[  420.672669]     nr_bounce    0
<4>[  420.675781]     nr_vmscan_write 12
<4>[  420.679242]     nr_vmscan_immediate_reclaim 0
<4>[  420.685851]     nr_writeback_temp 0
<4>[  420.689383]     nr_isolated_anon 0
<4>[  420.698204]     nr_isolated_file 0
<4>[  420.702748]     nr_shmem     11252
<4>[  420.706204]     nr_dirtied   239095
<4>[  420.711430]     nr_written   236836
<4>[  420.714969]     nr_anon_transparent_hugepages 0
<4>[  420.719657]         protection: (0, 0, 0)
<4>[  420.724826]   pagesets
<4>[  420.727239]     cpu: 0
<4>[  420.729650]               count: 116
<4>[  420.734903]               high:  186
<4>[  420.738526]               batch: 31
<4>[  420.742168]   vm stats threshold: 12
<4>[  420.745805]     cpu: 1
<4>[  420.749313]               count: 138
<4>[  420.753004]               high:  186
<4>[  420.758246]               batch: 31
<4>[  420.761844]   vm stats threshold: 12
<4>[  420.765455]   all_unreclaimable: 0
<4>[  420.768901]   start_pfn:         11264
<4>[  420.773787]   inactive_ratio:    1
<4>[  420.793478] Filename				Type		Size	Used	Priority
<4>[  420.798141] /dev/md256                              partition	530108	48	-1
<4>[  420.805945] /dev/md322                              partition	7235132	0	-2
<4>[  420.812998] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  420.836320]               total         used         free       shared      buffers
<4>[  420.836328]   Mem:       490756       414388        76368            0        18784
<4>[  420.836334]  Swap:     24542452           48     24542404
<4>[  420.836339] Total:     25033208       414436     24618772
<4>[  420.878623] ==== end ====
<4>[  429.407457] [S59Qthttpd] end
<4>[  429.412523] [S62cupsd] start
<4>[  430.937482] [S62cupsd] end
<4>[  430.943921] [S62ntpd] start
<4>[  431.025509] [S62ntpd] end
<4>[  431.028654] [S62smb] start
<4>[  456.048740] [S62smb] end
<4>[  456.052077] [S64MediaService] start
<4>[  456.591905] [S64MediaService] end
<4>[  456.596033] [S65thttpd] start
<4>[  464.741628] [S65thttpd] end
<4>[  464.744951] [S66ImRd] start
<4>[  464.749074] [S66ImRd] end
<4>[  464.752541] [S66wfm_thttpd] start
<4>[  467.829514] [S66wfm_thttpd] end
<4>[  467.833374] [S67ftp] start
<4>[  468.016147] [S67ftp] end
<4>[  468.019237] [S70crond] start
<4>[  468.023565] [S70crond] end
<4>[  468.026997] [S72logo] start
<4>[  468.031451] [S72logo] end
<4>[  468.034723] [S73ntpclient] start
<4>[  468.039244] [S73ntpclient] end
<4>[  468.052821] [S75stunnel] start
<4>[  468.057310] [S75stunnel] end
<4>[  468.075107] [S77recycled] start
<4>[  469.349532] [S77recycled] end
<4>[  469.353313] [S78qraid1] start
<4>[  469.361348] [S78qraid1] end
<4>[  469.364738] [S83ups] start
<4>[  469.368677] [S83ups] end
<4>[  469.397082] [S85login] start
<4>[  469.422891] [S85login] end
<4>[  469.440862] [S89bonjour] start
<4>[  469.445574] [S89bonjour] end
<4>[  469.490677] [S89wsd] start
<4>[  469.511634] [S89wsd] end
<6>[  471.112598] Bluetooth: Core ver 2.16
<6>[  471.116252] NET: Registered protocol family 31
<6>[  471.120746] Bluetooth: HCI device and connection manager initialized
<6>[  471.127144] Bluetooth: HCI socket layer initialized
<6>[  471.132080] Bluetooth: L2CAP socket layer initialized
<6>[  471.137192] Bluetooth: SCO socket layer initialized
<6>[  471.203550] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  471.209238] usbcore: registered new interface driver btusb
<6>[  471.302720] Bluetooth: RFCOMM TTY layer initialized
<6>[  471.307656] Bluetooth: RFCOMM socket layer initialized
<6>[  471.312865] Bluetooth: RFCOMM ver 1.11
<4>[  480.432186] [S90twonkymedia] start
<4>[  480.437013] [S90twonkymedia] end
<4>[  480.441056] [S92lunportman] start
<4>[  480.445827] [S92lunportman] end
<4>[  480.449785] [S95snmp] start
<4>[  480.461334] [S95snmp] end
<4>[  480.464674] [S97upnpd] start
<4>[  480.468819] [S97upnpd] end
<4>[  480.480781] [S98init_nas] start
<5>[  486.361633] UBI: attaching mtd6 to ubi2
<5>[  486.365512] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  486.371857] UBI: logical eraseblock size:    126976 bytes
<5>[  486.377277] UBI: smallest flash I/O unit:    2048
<5>[  486.382017] UBI: VID header offset:          2048 (aligned 2048)
<5>[  486.388045] UBI: data offset:                4096
<5>[  486.519116] UBI: max. sequence number:       543
<5>[  486.534390] UBI: attached mtd6 to ubi2
<5>[  486.538154] UBI: MTD device name:            "config"
<5>[  486.543238] UBI: MTD device size:            15 MiB
<5>[  486.548135] UBI: number of good PEBs:        120
<5>[  486.552780] UBI: number of bad PEBs:         0
<5>[  486.557240] UBI: number of corrupted PEBs:   0
<5>[  486.561706] UBI: max. allowed volumes:       128
<5>[  486.566336] UBI: wear-leveling threshold:    4096
<5>[  486.571063] UBI: number of internal volumes: 1
<5>[  486.575524] UBI: number of user volumes:     1
<5>[  486.579986] UBI: available PEBs:             0
<5>[  486.584440] UBI: total number of reserved PEBs: 120
<5>[  486.589329] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  486.595356] UBI: max/mean erase counter: 6/5
<5>[  486.599636] UBI: image sequence number:  1872325126
<5>[  486.604541] UBI: background thread "ubi_bgt2d" started, PID 11956
<5>[  486.724228] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  486.730269] UBIFS: mounted read-only
<5>[  486.733855] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  486.741452] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  486.748782] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  486.754638] UBIFS: default compressor: lzo
<5>[  486.758745] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  486.771514] UBIFS: un-mount UBI device 2, volume 0
<5>[  486.809636] UBI: mtd6 is detached from ubi2
<4>[  489.069741] rule type=2, num=0
<4>[  492.962661] [S98init_nas] end
<4>[  492.966489] [S99atalk] start
<4>[  492.975024] [S99atalk] end
<4>[  492.978622] [S99cloudinstall_report_complete_daemon] start
<4>[  492.989221] [S99cloudinstall_report_complete_daemon] end
<4>[  492.998786] [S99init_iTune] start
<4>[  493.011198] [S99init_iTune] end
<4>[  493.015014] [S99mysqld] start
<4>[  493.019139] [S99mysqld] end
<4>[  493.070638] [S99nfs] start
<4>[  493.074522] [S99nfs] end
<4>[  493.077654] [S99porter] start
<4>[  493.116285] [S99porter] end
<4>[  493.119697] [S99qanalytic] start
<4>[  493.176817] [S99qanalytic] end
<4>[  493.192149] [S99qcloud] start
<4>[  493.196323] [S99qcloud] end
<4>[  493.258954] [S99qsyncman] start
<4>[  493.281420] [S99qsyncman] end
<4>[  493.285014] [S99sdmd.sh] start
<4>[  493.289419] [S99sdmd.sh] end
<4>[  493.377509] [S99sync_action.sh] start
<4>[  493.414218] [S99sync_action.sh] end
<4>[  493.470923] [S99z_antivirus] start
<4>[  493.501824] [S99z_antivirus] end
<4>[  509.866032] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  509.874001] NFSD: starting 90-second grace period
<4>[  597.656491] ====== 2020-04-03 17:44:38 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  619.858442] UBI: attaching mtd6 to ubi2
<5>[  619.862296] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  619.868633] UBI: logical eraseblock size:    126976 bytes
<5>[  619.874072] UBI: smallest flash I/O unit:    2048
<5>[  619.878789] UBI: VID header offset:          2048 (aligned 2048)
<5>[  619.884831] UBI: data offset:                4096
<5>[  619.995516] UBI: max. sequence number:       543
<5>[  620.013429] UBI: attached mtd6 to ubi2
<5>[  620.017210] UBI: MTD device name:            "config"
<5>[  620.022292] UBI: MTD device size:            15 MiB
<5>[  620.027228] UBI: number of good PEBs:        120
<5>[  620.031858] UBI: number of bad PEBs:         0
<5>[  620.036319] UBI: number of corrupted PEBs:   0
<5>[  620.040783] UBI: max. allowed volumes:       128
<5>[  620.046859] UBI: wear-leveling threshold:    4096
<5>[  620.052922] UBI: number of internal volumes: 1
<5>[  620.058799] UBI: number of user volumes:     1
<5>[  620.063945] UBI: available PEBs:             0
<5>[  620.068408] UBI: total number of reserved PEBs: 120
<5>[  620.073331] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  620.079364] UBI: max/mean erase counter: 6/5
<5>[  620.083669] UBI: image sequence number:  1872325126
<5>[  620.094564] UBI: background thread "ubi_bgt2d" started, PID 17622
<5>[  620.232342] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  620.238406] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  620.246032] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  620.253391] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  620.253398] UBIFS: default compressor: lzo
<5>[  620.253403] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  620.968272] UBIFS: un-mount UBI device 2, volume 0
<5>[  621.027278] UBI: mtd6 is detached from ubi2
<5>[22219.821181] UBI: attaching mtd6 to ubi2
<5>[22219.825089] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[22219.831374] UBI: logical eraseblock size:    126976 bytes
<5>[22219.836809] UBI: smallest flash I/O unit:    2048
<5>[22219.841526] UBI: VID header offset:          2048 (aligned 2048)
<5>[22219.847563] UBI: data offset:                4096
<5>[22219.955853] UBI: max. sequence number:       544
<5>[22219.971282] UBI: attached mtd6 to ubi2
<5>[22219.975084] UBI: MTD device name:            "config"
<5>[22219.980151] UBI: MTD device size:            15 MiB
<5>[22219.985072] UBI: number of good PEBs:        120
<5>[22219.989710] UBI: number of bad PEBs:         0
<5>[22219.994200] UBI: number of corrupted PEBs:   0
<5>[22219.998662] UBI: max. allowed volumes:       128
<5>[22220.003306] UBI: wear-leveling threshold:    4096
<5>[22220.008023] UBI: number of internal volumes: 1
<5>[22220.012477] UBI: number of user volumes:     1
<5>[22220.016938] UBI: available PEBs:             0
<5>[22220.021393] UBI: total number of reserved PEBs: 120
<5>[22220.026324] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[22220.032347] UBI: max/mean erase counter: 6/5
<5>[22220.036636] UBI: image sequence number:  1872325126
<5>[22220.041541] UBI: background thread "ubi_bgt2d" started, PID 17510
<5>[22220.158649] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[22220.164697] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[22220.172289] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[22220.179629] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[22220.185487] UBIFS: default compressor: lzo
<5>[22220.189595] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[22220.415759] UBIFS: un-mount UBI device 2, volume 0
<5>[22220.469229] UBI: mtd6 is detached from ubi2
<5>[43819.853721] UBI: attaching mtd6 to ubi2
<5>[43819.857574] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[43819.863898] UBI: logical eraseblock size:    126976 bytes
<5>[43819.869322] UBI: smallest flash I/O unit:    2048
<5>[43819.874072] UBI: VID header offset:          2048 (aligned 2048)
<5>[43819.880096] UBI: data offset:                4096
<5>[43819.987807] UBI: max. sequence number:       545
<5>[43820.003130] UBI: attached mtd6 to ubi2
<5>[43820.006896] UBI: MTD device name:            "config"
<5>[43820.011961] UBI: MTD device size:            15 MiB
<5>[43820.016867] UBI: number of good PEBs:        120
<5>[43820.021495] UBI: number of bad PEBs:         0
<5>[43820.025957] UBI: number of corrupted PEBs:   0
<5>[43820.030411] UBI: max. allowed volumes:       128
<5>[43820.035044] UBI: wear-leveling threshold:    4096
<5>[43820.039759] UBI: number of internal volumes: 1
<5>[43820.044221] UBI: number of user volumes:     1
<5>[43820.048674] UBI: available PEBs:             0
<5>[43820.053139] UBI: total number of reserved PEBs: 120
<5>[43820.058033] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[43820.064065] UBI: max/mean erase counter: 6/5
<5>[43820.068350] UBI: image sequence number:  1872325126
<5>[43820.073372] UBI: background thread "ubi_bgt2d" started, PID 16969
<5>[43820.191458] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[43820.197506] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[43820.205109] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[43820.212445] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[43820.218300] UBIFS: default compressor: lzo
<5>[43820.222407] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[43820.436092] UBIFS: un-mount UBI device 2, volume 0
<5>[43823.989306] UBI: mtd6 is detached from ubi2
<5>[65420.055131] UBI: attaching mtd6 to ubi2
<5>[65420.059002] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[65420.065352] UBI: logical eraseblock size:    126976 bytes
<5>[65420.070791] UBI: smallest flash I/O unit:    2048
<5>[65420.075551] UBI: VID header offset:          2048 (aligned 2048)
<5>[65420.081595] UBI: data offset:                4096
<5>[65420.193224] UBI: max. sequence number:       546
<5>[65420.208828] UBI: attached mtd6 to ubi2
<5>[65420.212596] UBI: MTD device name:            "config"
<5>[65420.217720] UBI: MTD device size:            15 MiB
<5>[65420.222629] UBI: number of good PEBs:        120
<5>[65420.227297] UBI: number of bad PEBs:         0
<5>[65420.231758] UBI: number of corrupted PEBs:   0
<5>[65420.236253] UBI: max. allowed volumes:       128
<5>[65420.240901] UBI: wear-leveling threshold:    4096
<5>[65420.245642] UBI: number of internal volumes: 1
<5>[65420.250102] UBI: number of user volumes:     1
<5>[65420.254588] UBI: available PEBs:             0
<5>[65420.259043] UBI: total number of reserved PEBs: 120
<5>[65420.263942] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[65420.269965] UBI: max/mean erase counter: 6/5
<5>[65420.274251] UBI: image sequence number:  1872325126
<5>[65420.279158] UBI: background thread "ubi_bgt2d" started, PID 26506
<5>[65420.458925] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[65420.465006] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[65420.472611] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[65420.479963] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[65420.485830] UBIFS: default compressor: lzo
<5>[65420.489940] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[65420.799002] UBIFS: un-mount UBI device 2, volume 0
<5>[65420.861369] UBI: mtd6 is detached from ubi2
<5>[87020.005754] UBI: attaching mtd6 to ubi2
<5>[87020.009607] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[87020.015985] UBI: logical eraseblock size:    126976 bytes
<5>[87020.021401] UBI: smallest flash I/O unit:    2048
<5>[87020.026132] UBI: VID header offset:          2048 (aligned 2048)
<5>[87020.032154] UBI: data offset:                4096
<5>[87020.140317] UBI: max. sequence number:       547
<5>[87020.155625] UBI: attached mtd6 to ubi2
<5>[87020.159392] UBI: MTD device name:            "config"
<5>[87020.164493] UBI: MTD device size:            15 MiB
<5>[87020.169383] UBI: number of good PEBs:        120
<5>[87020.174024] UBI: number of bad PEBs:         0
<5>[87020.178478] UBI: number of corrupted PEBs:   0
<5>[87020.182932] UBI: max. allowed volumes:       128
<5>[87020.187572] UBI: wear-leveling threshold:    4096
<5>[87020.192288] UBI: number of internal volumes: 1
<5>[87020.196755] UBI: number of user volumes:     1
<5>[87020.201215] UBI: available PEBs:             0
<5>[87020.205691] UBI: total number of reserved PEBs: 120
<5>[87020.210583] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[87020.216627] UBI: max/mean erase counter: 6/5
<5>[87020.220911] UBI: image sequence number:  1872325126
<5>[87020.225840] UBI: background thread "ubi_bgt2d" started, PID 6897
<5>[87020.345198] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[87020.351239] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[87020.358852] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[87020.366193] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[87020.372041] UBIFS: default compressor: lzo
<5>[87020.376158] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[87020.579020] UBIFS: un-mount UBI device 2, volume 0
<5>[87020.639487] UBI: mtd6 is detached from ubi2
<5>[108620.112044] UBI: attaching mtd6 to ubi2
<5>[108620.116029] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[108620.122408] UBI: logical eraseblock size:    126976 bytes
<5>[108620.127931] UBI: smallest flash I/O unit:    2048
<5>[108620.132735] UBI: VID header offset:          2048 (aligned 2048)
<5>[108620.138853] UBI: data offset:                4096
<5>[108620.246646] UBI: max. sequence number:       548
<5>[108620.262011] UBI: attached mtd6 to ubi2
<5>[108620.265903] UBI: MTD device name:            "config"
<5>[108620.271058] UBI: MTD device size:            15 MiB
<5>[108620.276049] UBI: number of good PEBs:        120
<5>[108620.280766] UBI: number of bad PEBs:         0
<5>[108620.285314] UBI: number of corrupted PEBs:   0
<5>[108620.289855] UBI: max. allowed volumes:       128
<5>[108620.294576] UBI: wear-leveling threshold:    4096
<5>[108620.299378] UBI: number of internal volumes: 1
<5>[108620.303924] UBI: number of user volumes:     1
<5>[108620.308465] UBI: available PEBs:             0
<5>[108620.313013] UBI: total number of reserved PEBs: 120
<5>[108620.317990] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[108620.324106] UBI: max/mean erase counter: 6/5
<5>[108620.328475] UBI: image sequence number:  1872325126
<5>[108620.333544] UBI: background thread "ubi_bgt2d" started, PID 7828
<5>[108620.452781] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[108620.458925] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[108620.466618] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[108620.474046] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[108620.479982] UBIFS: default compressor: lzo
<5>[108620.484188] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[108620.688387] UBIFS: un-mount UBI device 2, volume 0
<5>[108620.739180] UBI: mtd6 is detached from ubi2
<5>[130220.154172] UBI: attaching mtd6 to ubi2
<5>[130220.158112] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[130220.164527] UBI: logical eraseblock size:    126976 bytes
<5>[130220.170037] UBI: smallest flash I/O unit:    2048
<5>[130220.174851] UBI: VID header offset:          2048 (aligned 2048)
<5>[130220.180961] UBI: data offset:                4096
<5>[130220.288952] UBI: max. sequence number:       549
<5>[130220.304405] UBI: attached mtd6 to ubi2
<5>[130220.308278] UBI: MTD device name:            "config"
<5>[130220.313462] UBI: MTD device size:            15 MiB
<5>[130220.318447] UBI: number of good PEBs:        120
<5>[130220.323183] UBI: number of bad PEBs:         0
<5>[130220.327724] UBI: number of corrupted PEBs:   0
<5>[130220.332265] UBI: max. allowed volumes:       128
<5>[130220.336991] UBI: wear-leveling threshold:    4096
<5>[130220.341795] UBI: number of internal volumes: 1
<5>[130220.346346] UBI: number of user volumes:     1
<5>[130220.350887] UBI: available PEBs:             0
<5>[130220.355433] UBI: total number of reserved PEBs: 120
<5>[130220.360409] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[130220.366523] UBI: max/mean erase counter: 6/5
<5>[130220.370890] UBI: image sequence number:  1872325126
<5>[130220.375885] UBI: background thread "ubi_bgt2d" started, PID 8204
<5>[130220.495200] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[130220.501317] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[130220.509022] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[130220.516451] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[130220.522390] UBIFS: default compressor: lzo
<5>[130220.526595] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[130220.729747] UBIFS: un-mount UBI device 2, volume 0
<5>[130220.789492] UBI: mtd6 is detached from ubi2
<5>[151820.224060] UBI: attaching mtd6 to ubi2
<5>[151820.227998] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[151820.234420] UBI: logical eraseblock size:    126976 bytes
<5>[151820.239922] UBI: smallest flash I/O unit:    2048
<5>[151820.244758] UBI: VID header offset:          2048 (aligned 2048)
<5>[151820.250882] UBI: data offset:                4096
<5>[151820.358714] UBI: max. sequence number:       550
<5>[151820.375758] UBI: attached mtd6 to ubi2
<5>[151820.379620] UBI: MTD device name:            "config"
<5>[151820.384828] UBI: MTD device size:            15 MiB
<5>[151820.389814] UBI: number of good PEBs:        120
<5>[151820.394571] UBI: number of bad PEBs:         0
<5>[151820.399119] UBI: number of corrupted PEBs:   0
<5>[151820.403681] UBI: max. allowed volumes:       128
<5>[151820.408398] UBI: wear-leveling threshold:    4096
<5>[151820.413211] UBI: number of internal volumes: 1
<5>[151820.417753] UBI: number of user volumes:     1
<5>[151820.422293] UBI: available PEBs:             0
<5>[151820.426859] UBI: total number of reserved PEBs: 120
<5>[151820.431843] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[151820.437972] UBI: max/mean erase counter: 6/5
<5>[151820.442340] UBI: image sequence number:  1872325126
<5>[151820.447353] UBI: background thread "ubi_bgt2d" started, PID 8384
<5>[151820.570097] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[151820.576235] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[151820.583928] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[151820.591345] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[151820.597288] UBIFS: default compressor: lzo
<5>[151820.601483] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[151820.802587] UBIFS: un-mount UBI device 2, volume 0
<5>[151820.873233] UBI: mtd6 is detached from ubi2
<5>[173420.317858] UBI: attaching mtd6 to ubi2
<5>[173420.321798] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[173420.328199] UBI: logical eraseblock size:    126976 bytes
<5>[173420.333716] UBI: smallest flash I/O unit:    2048
<5>[173420.338520] UBI: VID header offset:          2048 (aligned 2048)
<5>[173420.344638] UBI: data offset:                4096
<5>[173420.459234] UBI: max. sequence number:       551
<5>[173420.475753] UBI: attached mtd6 to ubi2
<5>[173420.479623] UBI: MTD device name:            "config"
<5>[173420.484814] UBI: MTD device size:            15 MiB
<5>[173420.489814] UBI: number of good PEBs:        120
<5>[173420.494567] UBI: number of bad PEBs:         0
<5>[173420.499117] UBI: number of corrupted PEBs:   0
<5>[173420.503675] UBI: max. allowed volumes:       128
<5>[173420.508391] UBI: wear-leveling threshold:    4096
<5>[173420.513203] UBI: number of internal volumes: 1
<5>[173420.517745] UBI: number of user volumes:     1
<5>[173420.522286] UBI: available PEBs:             0
<5>[173420.526837] UBI: total number of reserved PEBs: 120
<5>[173420.531815] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[173420.537932] UBI: max/mean erase counter: 6/5
<5>[173420.542301] UBI: image sequence number:  1872325126
<5>[173420.547313] UBI: background thread "ubi_bgt2d" started, PID 8296
<5>[173420.666283] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[173420.672400] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[173420.680102] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[173420.687530] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[173420.693472] UBIFS: default compressor: lzo
<5>[173420.697666] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[173420.904083] UBIFS: un-mount UBI device 2, volume 0
<5>[173420.952528] UBI: mtd6 is detached from ubi2
<5>[195020.383130] UBI: attaching mtd6 to ubi2
<5>[195020.387069] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[195020.393490] UBI: logical eraseblock size:    126976 bytes
<5>[195020.399029] UBI: smallest flash I/O unit:    2048
<5>[195020.403851] UBI: VID header offset:          2048 (aligned 2048)
<5>[195020.409960] UBI: data offset:                4096
<5>[195020.534718] UBI: max. sequence number:       552
<5>[195020.550149] UBI: attached mtd6 to ubi2
<5>[195020.554125] UBI: MTD device name:            "config"
<5>[195020.559347] UBI: MTD device size:            15 MiB
<5>[195020.564358] UBI: number of good PEBs:        120
<5>[195020.569085] UBI: number of bad PEBs:         0
<5>[195020.573656] UBI: number of corrupted PEBs:   0
<5>[195020.578205] UBI: max. allowed volumes:       128
<5>[195020.582930] UBI: wear-leveling threshold:    4096
<5>[195020.587765] UBI: number of internal volumes: 1
<5>[195020.592314] UBI: number of user volumes:     1
<5>[195020.596898] UBI: available PEBs:             0
<5>[195020.601447] UBI: total number of reserved PEBs: 120
<5>[195020.606438] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[195020.612548] UBI: max/mean erase counter: 6/5
<5>[195020.616922] UBI: image sequence number:  1872325126
<5>[195020.621916] UBI: background thread "ubi_bgt2d" started, PID 6073
<5>[195020.739407] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[195020.745545] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[195020.753237] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[195020.760654] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[195020.766603] UBIFS: default compressor: lzo
<5>[195020.770798] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[195020.976342] UBIFS: un-mount UBI device 2, volume 0
<5>[195021.044408] UBI: mtd6 is detached from ubi2
<5>[216620.459105] UBI: attaching mtd6 to ubi2
<5>[216620.463099] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[216620.469507] UBI: logical eraseblock size:    126976 bytes
<5>[216620.475027] UBI: smallest flash I/O unit:    2048
<5>[216620.479831] UBI: VID header offset:          2048 (aligned 2048)
<5>[216620.485949] UBI: data offset:                4096
<5>[216620.593738] UBI: max. sequence number:       553
<5>[216620.609117] UBI: attached mtd6 to ubi2
<5>[216620.613007] UBI: MTD device name:            "config"
<5>[216620.618161] UBI: MTD device size:            15 MiB
<5>[216620.623147] UBI: number of good PEBs:        120
<5>[216620.627863] UBI: number of bad PEBs:         0
<5>[216620.632403] UBI: number of corrupted PEBs:   0
<5>[216620.637015] UBI: max. allowed volumes:       128
<5>[216620.641734] UBI: wear-leveling threshold:    4096
<5>[216620.646558] UBI: number of internal volumes: 1
<5>[216620.651101] UBI: number of user volumes:     1
<5>[216620.655669] UBI: available PEBs:             0
<5>[216620.660213] UBI: total number of reserved PEBs: 120
<5>[216620.665203] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[216620.671312] UBI: max/mean erase counter: 6/5
<5>[216620.675686] UBI: image sequence number:  1872325126
<5>[216620.680677] UBI: background thread "ubi_bgt2d" started, PID 8480
<5>[216620.802818] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[216620.808952] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[216620.816683] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[216620.824109] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[216620.830051] UBIFS: default compressor: lzo
<5>[216620.834259] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[216621.039757] UBIFS: un-mount UBI device 2, volume 0
<5>[216621.114139] UBI: mtd6 is detached from ubi2
<5>[238220.540488] UBI: attaching mtd6 to ubi2
<5>[238220.544475] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[238220.550848] UBI: logical eraseblock size:    126976 bytes
<5>[238220.556420] UBI: smallest flash I/O unit:    2048
<5>[238220.561246] UBI: VID header offset:          2048 (aligned 2048)
<5>[238220.567373] UBI: data offset:                4096
<5>[238220.675156] UBI: max. sequence number:       554
<5>[238220.690522] UBI: attached mtd6 to ubi2
<5>[238220.694432] UBI: MTD device name:            "config"
<5>[238220.699587] UBI: MTD device size:            15 MiB
<5>[238220.704573] UBI: number of good PEBs:        120
<5>[238220.709289] UBI: number of bad PEBs:         0
<5>[238220.713838] UBI: number of corrupted PEBs:   0
<5>[238220.718380] UBI: max. allowed volumes:       128
<5>[238220.723115] UBI: wear-leveling threshold:    4096
<5>[238220.727920] UBI: number of internal volumes: 1
<5>[238220.732460] UBI: number of user volumes:     1
<5>[238220.737009] UBI: available PEBs:             0
<5>[238220.741550] UBI: total number of reserved PEBs: 120
<5>[238220.746533] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[238220.752647] UBI: max/mean erase counter: 6/5
<5>[238220.757028] UBI: image sequence number:  1872325126
<5>[238220.762018] UBI: background thread "ubi_bgt2d" started, PID 11247
<5>[238220.879280] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[238220.885416] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[238220.893105] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[238220.900522] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[238220.906466] UBIFS: default compressor: lzo
<5>[238220.910661] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[238221.125722] UBIFS: un-mount UBI device 2, volume 0
<5>[238221.174904] UBI: mtd6 is detached from ubi2
<5>[259820.628158] UBI: attaching mtd6 to ubi2
<5>[259820.632098] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[259820.638512] UBI: logical eraseblock size:    126976 bytes
<5>[259820.644039] UBI: smallest flash I/O unit:    2048
<5>[259820.648843] UBI: VID header offset:          2048 (aligned 2048)
<5>[259820.654970] UBI: data offset:                4096
<5>[259820.763789] UBI: max. sequence number:       555
<5>[259820.779172] UBI: attached mtd6 to ubi2
<5>[259820.783050] UBI: MTD device name:            "config"
<5>[259820.788205] UBI: MTD device size:            15 MiB
<5>[259820.793190] UBI: number of good PEBs:        120
<5>[259820.797906] UBI: number of bad PEBs:         0
<5>[259820.802524] UBI: number of corrupted PEBs:   0
<5>[259820.807081] UBI: max. allowed volumes:       128
<5>[259820.811797] UBI: wear-leveling threshold:    4096
<5>[259820.816612] UBI: number of internal volumes: 1
<5>[259820.821160] UBI: number of user volumes:     1
<5>[259820.825715] UBI: available PEBs:             0
<5>[259820.830257] UBI: total number of reserved PEBs: 120
<5>[259820.835242] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[259820.841352] UBI: max/mean erase counter: 6/5
<5>[259820.845729] UBI: image sequence number:  1872325126
<5>[259820.850721] UBI: background thread "ubi_bgt2d" started, PID 15323
<5>[259820.972729] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[259820.978865] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[259820.986554] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[259820.993987] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[259820.999933] UBIFS: default compressor: lzo
<5>[259821.004138] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[259821.208957] UBIFS: un-mount UBI device 2, volume 0
<5>[259821.283021] UBI: mtd6 is detached from ubi2
<5>[281420.722332] UBI: attaching mtd6 to ubi2
<5>[281420.726319] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[281420.732691] UBI: logical eraseblock size:    126976 bytes
<5>[281420.738224] UBI: smallest flash I/O unit:    2048
<5>[281420.743040] UBI: VID header offset:          2048 (aligned 2048)
<5>[281420.749149] UBI: data offset:                4096
<5>[281420.856924] UBI: max. sequence number:       556
<5>[281420.872307] UBI: attached mtd6 to ubi2
<5>[281420.876221] UBI: MTD device name:            "config"
<5>[281420.881381] UBI: MTD device size:            15 MiB
<5>[281420.886376] UBI: number of good PEBs:        120
<5>[281420.891091] UBI: number of bad PEBs:         0
<5>[281420.895641] UBI: number of corrupted PEBs:   0
<5>[281420.900183] UBI: max. allowed volumes:       128
<5>[281420.904913] UBI: wear-leveling threshold:    4096
<5>[281420.909715] UBI: number of internal volumes: 1
<5>[281420.914266] UBI: number of user volumes:     1
<5>[281420.918807] UBI: available PEBs:             0
<5>[281420.923358] UBI: total number of reserved PEBs: 120
<5>[281420.928336] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[281420.934456] UBI: max/mean erase counter: 6/5
<5>[281420.938823] UBI: image sequence number:  1872325126
<5>[281420.944031] UBI: background thread "ubi_bgt2d" started, PID 18328
<5>[281421.062607] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[281421.068751] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[281421.076441] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[281421.083868] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[281421.089804] UBIFS: default compressor: lzo
<5>[281421.094004] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[281421.298159] UBIFS: un-mount UBI device 2, volume 0
<5>[281421.354138] UBI: mtd6 is detached from ubi2
<5>[303020.783882] UBI: attaching mtd6 to ubi2
<5>[303020.787822] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[303020.794241] UBI: logical eraseblock size:    126976 bytes
<5>[303020.799743] UBI: smallest flash I/O unit:    2048
<5>[303020.804570] UBI: VID header offset:          2048 (aligned 2048)
<5>[303020.810763] UBI: data offset:                4096
<5>[303020.918606] UBI: max. sequence number:       557
<5>[303020.934054] UBI: attached mtd6 to ubi2
<5>[303020.937908] UBI: MTD device name:            "config"
<5>[303020.943095] UBI: MTD device size:            15 MiB
<5>[303020.948073] UBI: number of good PEBs:        120
<5>[303020.952789] UBI: number of bad PEBs:         0
<5>[303020.957341] UBI: number of corrupted PEBs:   0
<5>[303020.961884] UBI: max. allowed volumes:       128
<5>[303020.966610] UBI: wear-leveling threshold:    4096
<5>[303020.971418] UBI: number of internal volumes: 1
<5>[303020.975970] UBI: number of user volumes:     1
<5>[303020.980512] UBI: available PEBs:             0
<5>[303020.985067] UBI: total number of reserved PEBs: 120
<5>[303020.990045] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[303020.996171] UBI: max/mean erase counter: 6/5
<5>[303021.000539] UBI: image sequence number:  1872325126
<5>[303021.005570] UBI: background thread "ubi_bgt2d" started, PID 20687
<5>[303021.124618] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[303021.130733] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[303021.138444] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[303021.145882] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[303021.151818] UBIFS: default compressor: lzo
<5>[303021.156024] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[303021.360865] UBIFS: un-mount UBI device 2, volume 0
<5>[303021.443155] UBI: mtd6 is detached from ubi2
<5>[324620.857817] UBI: attaching mtd6 to ubi2
<5>[324620.861764] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[324620.868185] UBI: logical eraseblock size:    126976 bytes
<5>[324620.873736] UBI: smallest flash I/O unit:    2048
<5>[324620.878547] UBI: VID header offset:          2048 (aligned 2048)
<5>[324620.884680] UBI: data offset:                4096
<5>[324620.994279] UBI: max. sequence number:       558
<5>[324621.010511] UBI: attached mtd6 to ubi2
<5>[324621.014402] UBI: MTD device name:            "config"
<5>[324621.019560] UBI: MTD device size:            15 MiB
<5>[324621.024556] UBI: number of good PEBs:        120
<5>[324621.029273] UBI: number of bad PEBs:         0
<5>[324621.033831] UBI: number of corrupted PEBs:   0
<5>[324621.038373] UBI: max. allowed volumes:       128
<5>[324621.043120] UBI: wear-leveling threshold:    4096
<5>[324621.047923] UBI: number of internal volumes: 1
<5>[324621.052465] UBI: number of user volumes:     1
<5>[324621.057017] UBI: available PEBs:             0
<5>[324621.061558] UBI: total number of reserved PEBs: 120
<5>[324621.066544] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[324621.072655] UBI: max/mean erase counter: 6/5
<5>[324621.077030] UBI: image sequence number:  1872325126
<5>[324621.082020] UBI: background thread "ubi_bgt2d" started, PID 23096
<5>[324621.203735] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[324621.209852] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[324621.217553] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[324621.224998] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[324621.230934] UBIFS: default compressor: lzo
<5>[324621.235142] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[324621.446144] UBIFS: un-mount UBI device 2, volume 0
<5>[324621.513645] UBI: mtd6 is detached from ubi2
<5>[346224.767423] UBI: attaching mtd6 to ubi2
<5>[346224.771363] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[346224.777792] UBI: logical eraseblock size:    126976 bytes
<5>[346224.783322] UBI: smallest flash I/O unit:    2048
<5>[346224.788127] UBI: VID header offset:          2048 (aligned 2048)
<5>[346224.794248] UBI: data offset:                4096
<5>[346224.902047] UBI: max. sequence number:       559
<5>[346224.925253] UBI: attached mtd6 to ubi2
<5>[346224.929109] UBI: MTD device name:            "config"
<5>[346224.934319] UBI: MTD device size:            15 MiB
<5>[346224.939301] UBI: number of good PEBs:        120
<5>[346224.944044] UBI: number of bad PEBs:         0
<5>[346224.948589] UBI: number of corrupted PEBs:   0
<5>[346224.953149] UBI: max. allowed volumes:       128
<5>[346224.957869] UBI: wear-leveling threshold:    4096
<5>[346224.962681] UBI: number of internal volumes: 1
<5>[346224.967256] UBI: number of user volumes:     1
<5>[346224.971799] UBI: available PEBs:             0
<5>[346224.976381] UBI: total number of reserved PEBs: 120
<5>[346224.981361] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[346224.987504] UBI: max/mean erase counter: 6/5
<5>[346224.991874] UBI: image sequence number:  1872325126
<5>[346224.997229] UBI: background thread "ubi_bgt2d" started, PID 26183
<5>[346225.136233] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[346225.142350] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[346225.150048] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[346225.157476] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[346225.163418] UBIFS: default compressor: lzo
<5>[346225.167613] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[346225.382250] UBIFS: un-mount UBI device 2, volume 0
<5>[346225.453548] UBI: mtd6 is detached from ubi2
<5>[367824.845329] UBI: attaching mtd6 to ubi2
<5>[367824.849269] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[367824.855664] UBI: logical eraseblock size:    126976 bytes
<5>[367824.861164] UBI: smallest flash I/O unit:    2048
<5>[367824.865986] UBI: VID header offset:          2048 (aligned 2048)
<5>[367824.872096] UBI: data offset:                4096
<5>[367824.991387] UBI: max. sequence number:       560
<5>[367825.007292] UBI: attached mtd6 to ubi2
<5>[367825.011147] UBI: MTD device name:            "config"
<5>[367825.016325] UBI: MTD device size:            15 MiB
<5>[367825.021304] UBI: number of good PEBs:        120
<5>[367825.026028] UBI: number of bad PEBs:         0
<5>[367825.030570] UBI: number of corrupted PEBs:   0
<5>[367825.035124] UBI: max. allowed volumes:       128
<5>[367825.039841] UBI: wear-leveling threshold:    4096
<5>[367825.044652] UBI: number of internal volumes: 1
<5>[367825.049194] UBI: number of user volumes:     1
<5>[367825.053745] UBI: available PEBs:             0
<5>[367825.058286] UBI: total number of reserved PEBs: 120
<5>[367825.063273] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[367825.069383] UBI: max/mean erase counter: 6/5
<5>[367825.073758] UBI: image sequence number:  1872325126
<5>[367825.078754] UBI: background thread "ubi_bgt2d" started, PID 28779
<5>[367825.199459] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[367825.205602] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[367825.213292] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[367825.220708] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[367825.226651] UBIFS: default compressor: lzo
<5>[367825.230846] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[367825.441064] UBIFS: un-mount UBI device 2, volume 0
<5>[367825.493094] UBI: mtd6 is detached from ubi2
<5>[389424.918825] UBI: attaching mtd6 to ubi2
<5>[389424.922765] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[389424.929184] UBI: logical eraseblock size:    126976 bytes
<5>[389424.934718] UBI: smallest flash I/O unit:    2048
<5>[389424.939523] UBI: VID header offset:          2048 (aligned 2048)
<5>[389424.945645] UBI: data offset:                4096
<5>[389425.053663] UBI: max. sequence number:       564
<5>[389425.069052] UBI: attached mtd6 to ubi2
<5>[389425.072906] UBI: MTD device name:            "config"
<5>[389425.078076] UBI: MTD device size:            15 MiB
<5>[389425.083060] UBI: number of good PEBs:        120
<5>[389425.087782] UBI: number of bad PEBs:         0
<5>[389425.092327] UBI: number of corrupted PEBs:   0
<5>[389425.096876] UBI: max. allowed volumes:       128
<5>[389425.101592] UBI: wear-leveling threshold:    4096
<5>[389425.106398] UBI: number of internal volumes: 1
<5>[389425.110939] UBI: number of user volumes:     1
<5>[389425.115489] UBI: available PEBs:             0
<5>[389425.120030] UBI: total number of reserved PEBs: 120
<5>[389425.125012] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[389425.131121] UBI: max/mean erase counter: 6/5
<5>[389425.135492] UBI: image sequence number:  1872325126
<5>[389425.140485] UBI: background thread "ubi_bgt2d" started, PID 31397
<5>[389425.262270] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[389425.268406] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[389425.276091] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[389425.283512] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[389425.289447] UBIFS: default compressor: lzo
<5>[389425.293644] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[389425.499038] UBIFS: un-mount UBI device 2, volume 0
<5>[389425.563477] UBI: mtd6 is detached from ubi2
<5>[411025.035721] UBI: attaching mtd6 to ubi2
<5>[411025.039659] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[411025.046063] UBI: logical eraseblock size:    126976 bytes
<5>[411025.051564] UBI: smallest flash I/O unit:    2048
<5>[411025.056385] UBI: VID header offset:          2048 (aligned 2048)
<5>[411025.062495] UBI: data offset:                4096
<5>[411025.170562] UBI: max. sequence number:       565
<5>[411025.185944] UBI: attached mtd6 to ubi2
<5>[411025.189797] UBI: MTD device name:            "config"
<5>[411025.194979] UBI: MTD device size:            15 MiB
<5>[411025.199957] UBI: number of good PEBs:        120
<5>[411025.204798] UBI: number of bad PEBs:         0
<5>[411025.209452] UBI: number of corrupted PEBs:   0
<5>[411025.214020] UBI: max. allowed volumes:       128
<5>[411025.218744] UBI: wear-leveling threshold:    4096
<5>[411025.223555] UBI: number of internal volumes: 1
<5>[411025.228096] UBI: number of user volumes:     1
<5>[411025.232637] UBI: available PEBs:             0
<5>[411025.237185] UBI: total number of reserved PEBs: 120
<5>[411025.242162] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[411025.248277] UBI: max/mean erase counter: 6/5
<5>[411025.252643] UBI: image sequence number:  1872325126
<5>[411025.257655] UBI: background thread "ubi_bgt2d" started, PID 2165
<5>[411025.376408] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[411025.382525] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[411025.390224] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[411025.397653] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[411025.403599] UBIFS: default compressor: lzo
<5>[411025.407793] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[411025.611923] UBIFS: un-mount UBI device 2, volume 0
<5>[411025.659502] UBI: mtd6 is detached from ubi2
<5>[432625.085861] UBI: attaching mtd6 to ubi2
<5>[432625.089800] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[432625.096221] UBI: logical eraseblock size:    126976 bytes
<5>[432625.101721] UBI: smallest flash I/O unit:    2048
<5>[432625.106559] UBI: VID header offset:          2048 (aligned 2048)
<5>[432625.112670] UBI: data offset:                4096
<5>[432625.220477] UBI: max. sequence number:       566
<5>[432625.235899] UBI: attached mtd6 to ubi2
<5>[432625.239754] UBI: MTD device name:            "config"
<5>[432625.244936] UBI: MTD device size:            15 MiB
<5>[432625.249914] UBI: number of good PEBs:        120
<5>[432625.254641] UBI: number of bad PEBs:         0
<5>[432625.259184] UBI: number of corrupted PEBs:   0
<5>[432625.263733] UBI: max. allowed volumes:       128
<5>[432625.268449] UBI: wear-leveling threshold:    4096
<5>[432625.273262] UBI: number of internal volumes: 1
<5>[432625.277804] UBI: number of user volumes:     1
<5>[432625.282344] UBI: available PEBs:             0
<5>[432625.286892] UBI: total number of reserved PEBs: 120
<5>[432625.291870] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[432625.297985] UBI: max/mean erase counter: 6/5
<5>[432625.302353] UBI: image sequence number:  1872325126
<5>[432625.307368] UBI: background thread "ubi_bgt2d" started, PID 4592
<5>[432625.426232] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[432625.432388] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[432625.440112] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[432625.447556] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[432625.453576] UBIFS: default compressor: lzo
<5>[432625.457774] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[432625.671031] UBIFS: un-mount UBI device 2, volume 0
<5>[432625.753872] UBI: mtd6 is detached from ubi2
<5>[454225.154337] UBI: attaching mtd6 to ubi2
<5>[454225.158278] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[454225.164697] UBI: logical eraseblock size:    126976 bytes
<5>[454225.170198] UBI: smallest flash I/O unit:    2048
<5>[454225.175014] UBI: VID header offset:          2048 (aligned 2048)
<5>[454225.181136] UBI: data offset:                4096
<5>[454225.289533] UBI: max. sequence number:       567
<5>[454225.304970] UBI: attached mtd6 to ubi2
<5>[454225.308829] UBI: MTD device name:            "config"
<5>[454225.314009] UBI: MTD device size:            15 MiB
<5>[454225.319003] UBI: number of good PEBs:        120
<5>[454225.323812] UBI: number of bad PEBs:         0
<5>[454225.328357] UBI: number of corrupted PEBs:   0
<5>[454225.332897] UBI: max. allowed volumes:       128
<5>[454225.337626] UBI: wear-leveling threshold:    4096
<5>[454225.342429] UBI: number of internal volumes: 1
<5>[454225.346980] UBI: number of user volumes:     1
<5>[454225.351521] UBI: available PEBs:             0
<5>[454225.356070] UBI: total number of reserved PEBs: 120
<5>[454225.361048] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[454225.367164] UBI: max/mean erase counter: 6/5
<5>[454225.371531] UBI: image sequence number:  1872325126
<5>[454225.376564] UBI: background thread "ubi_bgt2d" started, PID 7705
<5>[454225.495122] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[454225.501238] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[454225.508934] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[454225.516362] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[454225.522297] UBIFS: default compressor: lzo
<5>[454225.526498] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[454225.731215] UBIFS: un-mount UBI device 2, volume 0
<5>[454225.793601] UBI: mtd6 is detached from ubi2
<5>[475825.245820] UBI: attaching mtd6 to ubi2
<5>[475825.249760] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[475825.256179] UBI: logical eraseblock size:    126976 bytes
<5>[475825.261702] UBI: smallest flash I/O unit:    2048
<5>[475825.266524] UBI: VID header offset:          2048 (aligned 2048)
<5>[475825.272635] UBI: data offset:                4096
<5>[475825.380547] UBI: max. sequence number:       568
<5>[475825.395917] UBI: attached mtd6 to ubi2
<5>[475825.399778] UBI: MTD device name:            "config"
<5>[475825.404957] UBI: MTD device size:            15 MiB
<5>[475825.409934] UBI: number of good PEBs:        120
<5>[475825.414657] UBI: number of bad PEBs:         0
<5>[475825.419198] UBI: number of corrupted PEBs:   0
<5>[475825.423753] UBI: max. allowed volumes:       128
<5>[475825.428472] UBI: wear-leveling threshold:    4096
<5>[475825.433282] UBI: number of internal volumes: 1
<5>[475825.437824] UBI: number of user volumes:     1
<5>[475825.442364] UBI: available PEBs:             0
<5>[475825.446911] UBI: total number of reserved PEBs: 120
<5>[475825.451887] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[475825.458001] UBI: max/mean erase counter: 6/5
<5>[475825.462374] UBI: image sequence number:  1872325126
<5>[475825.467371] UBI: background thread "ubi_bgt2d" started, PID 10104
<5>[475825.584207] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[475825.590324] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[475825.598019] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[475825.605443] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[475825.611377] UBIFS: default compressor: lzo
<5>[475825.615576] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[475825.838444] UBIFS: un-mount UBI device 2, volume 0
<5>[475825.893606] UBI: mtd6 is detached from ubi2
<5>[497427.060726] UBI: attaching mtd6 to ubi2
<5>[497427.064718] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[497427.071103] UBI: logical eraseblock size:    126976 bytes
<5>[497427.076646] UBI: smallest flash I/O unit:    2048
<5>[497427.081450] UBI: VID header offset:          2048 (aligned 2048)
<5>[497427.087594] UBI: data offset:                4096
<5>[497427.195649] UBI: max. sequence number:       569
<5>[497427.211005] UBI: attached mtd6 to ubi2
<5>[497427.214903] UBI: MTD device name:            "config"
<5>[497427.220057] UBI: MTD device size:            15 MiB
<5>[497427.225046] UBI: number of good PEBs:        120
<5>[497427.229762] UBI: number of bad PEBs:         0
<5>[497427.234432] UBI: number of corrupted PEBs:   0
<5>[497427.238977] UBI: max. allowed volumes:       128
<5>[497427.243713] UBI: wear-leveling threshold:    4096
<5>[497427.248516] UBI: number of internal volumes: 1
<5>[497427.253072] UBI: number of user volumes:     1
<5>[497427.257614] UBI: available PEBs:             0
<5>[497427.262155] UBI: total number of reserved PEBs: 120
<5>[497427.267144] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[497427.273263] UBI: max/mean erase counter: 6/5
<5>[497427.277630] UBI: image sequence number:  1872325126
<5>[497427.282619] UBI: background thread "ubi_bgt2d" started, PID 12498
<5>[497427.403059] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[497427.409175] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[497427.416875] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[497427.424307] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[497427.430244] UBIFS: default compressor: lzo
<5>[497427.434474] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[497427.646297] UBIFS: un-mount UBI device 2, volume 0
<5>[497427.723029] UBI: mtd6 is detached from ubi2
<5>[519027.139894] UBI: attaching mtd6 to ubi2
<5>[519027.143881] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[519027.150254] UBI: logical eraseblock size:    126976 bytes
<5>[519027.155784] UBI: smallest flash I/O unit:    2048
<5>[519027.160589] UBI: VID header offset:          2048 (aligned 2048)
<5>[519027.166710] UBI: data offset:                4096
<5>[519027.277316] UBI: max. sequence number:       570
<5>[519027.292679] UBI: attached mtd6 to ubi2
<5>[519027.296588] UBI: MTD device name:            "config"
<5>[519027.301748] UBI: MTD device size:            15 MiB
<5>[519027.306735] UBI: number of good PEBs:        120
<5>[519027.311450] UBI: number of bad PEBs:         0
<5>[519027.316000] UBI: number of corrupted PEBs:   0
<5>[519027.320541] UBI: max. allowed volumes:       128
<5>[519027.325269] UBI: wear-leveling threshold:    4096
<5>[519027.330073] UBI: number of internal volumes: 1
<5>[519027.334623] UBI: number of user volumes:     1
<5>[519027.339165] UBI: available PEBs:             0
<5>[519027.343712] UBI: total number of reserved PEBs: 120
<5>[519027.348689] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[519027.354804] UBI: max/mean erase counter: 6/5
<5>[519027.359171] UBI: image sequence number:  1872325126
<5>[519027.364183] UBI: background thread "ubi_bgt2d" started, PID 15633
<5>[519027.483729] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[519027.489846] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[519027.497546] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[519027.504974] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[519027.510909] UBIFS: default compressor: lzo
<5>[519027.515118] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[519027.729777] UBIFS: un-mount UBI device 2, volume 0
<5>[519027.798162] UBI: mtd6 is detached from ubi2
<5>[540627.223015] UBI: attaching mtd6 to ubi2
<5>[540627.226956] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[540627.233364] UBI: logical eraseblock size:    126976 bytes
<5>[540627.238865] UBI: smallest flash I/O unit:    2048
<5>[540627.243693] UBI: VID header offset:          2048 (aligned 2048)
<5>[540627.249820] UBI: data offset:                4096
<5>[540627.357980] UBI: max. sequence number:       571
<5>[540627.373523] UBI: attached mtd6 to ubi2
<5>[540627.377405] UBI: MTD device name:            "config"
<5>[540627.382572] UBI: MTD device size:            15 MiB
<5>[540627.387610] UBI: number of good PEBs:        120
<5>[540627.392328] UBI: number of bad PEBs:         0
<5>[540627.396886] UBI: number of corrupted PEBs:   0
<5>[540627.401428] UBI: max. allowed volumes:       128
<5>[540627.406156] UBI: wear-leveling threshold:    4096
<5>[540627.410960] UBI: number of internal volumes: 1
<5>[540627.415512] UBI: number of user volumes:     1
<5>[540627.420053] UBI: available PEBs:             0
<5>[540627.424636] UBI: total number of reserved PEBs: 120
<5>[540627.429624] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[540627.435758] UBI: max/mean erase counter: 6/5
<5>[540627.440127] UBI: image sequence number:  1872325126
<5>[540627.445140] UBI: background thread "ubi_bgt2d" started, PID 18410
<5>[540627.563977] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[540627.570093] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[540627.577793] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[540627.585223] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[540627.591158] UBIFS: default compressor: lzo
<5>[540627.595364] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[540627.816800] UBIFS: un-mount UBI device 2, volume 0
<5>[540627.889572] UBI: mtd6 is detached from ubi2
<5>[562227.711473] UBI: attaching mtd6 to ubi2
<5>[562227.715442] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[562227.721813] UBI: logical eraseblock size:    126976 bytes
<5>[562227.727320] UBI: smallest flash I/O unit:    2048
<5>[562227.732124] UBI: VID header offset:          2048 (aligned 2048)
<5>[562227.738312] UBI: data offset:                4096
<5>[562227.846532] UBI: max. sequence number:       572
<5>[562227.861893] UBI: attached mtd6 to ubi2
<5>[562227.865783] UBI: MTD device name:            "config"
<5>[562227.870937] UBI: MTD device size:            15 MiB
<5>[562227.875930] UBI: number of good PEBs:        120
<5>[562227.880645] UBI: number of bad PEBs:         0
<5>[562227.885194] UBI: number of corrupted PEBs:   0
<5>[562227.889737] UBI: max. allowed volumes:       128
<5>[562227.894464] UBI: wear-leveling threshold:    4096
<5>[562227.899268] UBI: number of internal volumes: 1
<5>[562227.903816] UBI: number of user volumes:     1
<5>[562227.908358] UBI: available PEBs:             0
<5>[562227.912898] UBI: total number of reserved PEBs: 120
<5>[562227.917882] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[562227.923998] UBI: max/mean erase counter: 6/5
<5>[562227.928366] UBI: image sequence number:  1872325126
<5>[562227.933430] UBI: background thread "ubi_bgt2d" started, PID 20921
<5>[562228.051552] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[562228.057692] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[562228.065381] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[562228.072798] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[562228.078740] UBIFS: default compressor: lzo
<5>[562228.082934] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[562228.286475] UBIFS: un-mount UBI device 2, volume 0
<5>[562228.373479] UBI: mtd6 is detached from ubi2
<5>[583827.784324] UBI: attaching mtd6 to ubi2
<5>[583827.788263] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[583827.794661] UBI: logical eraseblock size:    126976 bytes
<5>[583827.800167] UBI: smallest flash I/O unit:    2048
<5>[583827.804996] UBI: VID header offset:          2048 (aligned 2048)
<5>[583827.811106] UBI: data offset:                4096
<5>[583827.919096] UBI: max. sequence number:       573
<5>[583827.934474] UBI: attached mtd6 to ubi2
<5>[583827.938331] UBI: MTD device name:            "config"
<5>[583827.943515] UBI: MTD device size:            15 MiB
<5>[583827.948494] UBI: number of good PEBs:        120
<5>[583827.953221] UBI: number of bad PEBs:         0
<5>[583827.957763] UBI: number of corrupted PEBs:   0
<5>[583827.962304] UBI: max. allowed volumes:       128
<5>[583827.967028] UBI: wear-leveling threshold:    4096
<5>[583827.971831] UBI: number of internal volumes: 1
<5>[583827.976380] UBI: number of user volumes:     1
<5>[583827.980922] UBI: available PEBs:             0
<5>[583827.985474] UBI: total number of reserved PEBs: 120
<5>[583827.990451] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[583827.996580] UBI: max/mean erase counter: 6/5
<5>[583828.000950] UBI: image sequence number:  1872325126
<5>[583828.006225] UBI: background thread "ubi_bgt2d" started, PID 23537
<5>[583828.125154] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[583828.131271] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[583828.138990] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[583828.146422] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[583828.152357] UBIFS: default compressor: lzo
<5>[583828.156564] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[583828.362472] UBIFS: un-mount UBI device 2, volume 0
<5>[583828.413815] UBI: mtd6 is detached from ubi2
<5>[605427.878706] UBI: attaching mtd6 to ubi2
<5>[605427.882654] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[605427.889068] UBI: logical eraseblock size:    126976 bytes
<5>[605427.894584] UBI: smallest flash I/O unit:    2048
<5>[605427.899389] UBI: VID header offset:          2048 (aligned 2048)
<5>[605427.905507] UBI: data offset:                4096
<5>[605428.014930] UBI: max. sequence number:       574
<5>[605428.030342] UBI: attached mtd6 to ubi2
<5>[605428.034227] UBI: MTD device name:            "config"
<5>[605428.039380] UBI: MTD device size:            15 MiB
<5>[605428.044368] UBI: number of good PEBs:        120
<5>[605428.049083] UBI: number of bad PEBs:         0
<5>[605428.053624] UBI: number of corrupted PEBs:   0
<5>[605428.058173] UBI: max. allowed volumes:       128
<5>[605428.062895] UBI: wear-leveling threshold:    4096
<5>[605428.067705] UBI: number of internal volumes: 1
<5>[605428.072247] UBI: number of user volumes:     1
<5>[605428.076795] UBI: available PEBs:             0
<5>[605428.081336] UBI: total number of reserved PEBs: 120
<5>[605428.086319] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[605428.092429] UBI: max/mean erase counter: 6/5
<5>[605428.096802] UBI: image sequence number:  1872325126
<5>[605428.101792] UBI: background thread "ubi_bgt2d" started, PID 26871
<5>[605428.224150] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[605428.230269] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[605428.237988] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[605428.245417] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[605428.251352] UBIFS: default compressor: lzo
<5>[605428.255554] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[605428.460510] UBIFS: un-mount UBI device 2, volume 0
<5>[605428.534338] UBI: mtd6 is detached from ubi2
<5>[627027.947845] UBI: attaching mtd6 to ubi2
<5>[627027.951842] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[627027.958214] UBI: logical eraseblock size:    126976 bytes
<5>[627027.963741] UBI: smallest flash I/O unit:    2048
<5>[627027.968573] UBI: VID header offset:          2048 (aligned 2048)
<5>[627027.974683] UBI: data offset:                4096
<5>[627028.082489] UBI: max. sequence number:       575
<5>[627028.097852] UBI: attached mtd6 to ubi2
<5>[627028.101753] UBI: MTD device name:            "config"
<5>[627028.106913] UBI: MTD device size:            15 MiB
<5>[627028.111913] UBI: number of good PEBs:        120
<5>[627028.116628] UBI: number of bad PEBs:         0
<5>[627028.121180] UBI: number of corrupted PEBs:   0
<5>[627028.125721] UBI: max. allowed volumes:       128
<5>[627028.130454] UBI: wear-leveling threshold:    4096
<5>[627028.135259] UBI: number of internal volumes: 1
<5>[627028.139812] UBI: number of user volumes:     1
<5>[627028.144355] UBI: available PEBs:             0
<5>[627028.148905] UBI: total number of reserved PEBs: 120
<5>[627028.153882] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[627028.159999] UBI: max/mean erase counter: 7/5
<5>[627028.164368] UBI: image sequence number:  1872325126
<5>[627028.169379] UBI: background thread "ubi_bgt2d" started, PID 29369
<5>[627028.288411] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[627028.294558] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[627028.302252] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[627028.309679] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[627028.315615] UBIFS: default compressor: lzo
<5>[627028.319820] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[627028.525761] UBIFS: un-mount UBI device 2, volume 0
<5>[627028.608641] UBI: mtd6 is detached from ubi2
<5>[648628.030736] UBI: attaching mtd6 to ubi2
<5>[648628.034716] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[648628.041128] UBI: logical eraseblock size:    126976 bytes
<5>[648628.046639] UBI: smallest flash I/O unit:    2048
<5>[648628.051460] UBI: VID header offset:          2048 (aligned 2048)
<5>[648628.057569] UBI: data offset:                4096
<5>[648628.165310] UBI: max. sequence number:       576
<5>[648628.180651] UBI: attached mtd6 to ubi2
<5>[648628.184505] UBI: MTD device name:            "config"
<5>[648628.189677] UBI: MTD device size:            15 MiB
<5>[648628.194654] UBI: number of good PEBs:        120
<5>[648628.199376] UBI: number of bad PEBs:         0
<5>[648628.203916] UBI: number of corrupted PEBs:   0
<5>[648628.208463] UBI: max. allowed volumes:       128
<5>[648628.213178] UBI: wear-leveling threshold:    4096
<5>[648628.217980] UBI: number of internal volumes: 1
<5>[648628.222525] UBI: number of user volumes:     1
<5>[648628.227065] UBI: available PEBs:             0
<5>[648628.231611] UBI: total number of reserved PEBs: 120
<5>[648628.236588] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[648628.242700] UBI: max/mean erase counter: 7/5
<5>[648628.247068] UBI: image sequence number:  1872325126
<5>[648628.252063] UBI: background thread "ubi_bgt2d" started, PID 31915
<5>[648628.368770] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[648628.374885] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[648628.382580] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[648628.390018] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[648628.395956] UBIFS: default compressor: lzo
<5>[648628.400159] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[648628.605541] UBIFS: un-mount UBI device 2, volume 0
<5>[648628.689072] UBI: mtd6 is detached from ubi2
<5>[670228.108421] UBI: attaching mtd6 to ubi2
<5>[670228.112412] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[670228.118819] UBI: logical eraseblock size:    126976 bytes
<5>[670228.124320] UBI: smallest flash I/O unit:    2048
<5>[670228.129137] UBI: VID header offset:          2048 (aligned 2048)
<5>[670228.135254] UBI: data offset:                4096
<5>[670228.243292] UBI: max. sequence number:       577
<5>[670228.258721] UBI: attached mtd6 to ubi2
<5>[670228.262625] UBI: MTD device name:            "config"
<5>[670228.267793] UBI: MTD device size:            15 MiB
<5>[670228.272820] UBI: number of good PEBs:        120
<5>[670228.277539] UBI: number of bad PEBs:         0
<5>[670228.282113] UBI: number of corrupted PEBs:   0
<5>[670228.286672] UBI: max. allowed volumes:       128
<5>[670228.291423] UBI: wear-leveling threshold:    4096
<5>[670228.296246] UBI: number of internal volumes: 1
<5>[670228.300802] UBI: number of user volumes:     1
<5>[670228.305344] UBI: available PEBs:             0
<5>[670228.309897] UBI: total number of reserved PEBs: 120
<5>[670228.314875] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[670228.320996] UBI: max/mean erase counter: 7/5
<5>[670228.325369] UBI: image sequence number:  1872325126
<5>[670228.330387] UBI: background thread "ubi_bgt2d" started, PID 2001
<5>[670228.448374] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[670228.454522] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[670228.462224] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[670228.469651] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[670228.475587] UBIFS: default compressor: lzo
<5>[670228.479790] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[670228.687549] UBIFS: un-mount UBI device 2, volume 0
<5>[670228.748904] UBI: mtd6 is detached from ubi2
<4>[681906.655641] rule type=2, num=1
<5>[691828.186234] UBI: attaching mtd6 to ubi2
<5>[691828.190221] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[691828.196624] UBI: logical eraseblock size:    126976 bytes
<5>[691828.202155] UBI: smallest flash I/O unit:    2048
<5>[691828.206960] UBI: VID header offset:          2048 (aligned 2048)
<5>[691828.213082] UBI: data offset:                4096
<5>[691828.321797] UBI: max. sequence number:       578
<5>[691828.337185] UBI: attached mtd6 to ubi2
<5>[691828.341065] UBI: MTD device name:            "config"
<5>[691828.346220] UBI: MTD device size:            15 MiB
<5>[691828.351206] UBI: number of good PEBs:        120
<5>[691828.355922] UBI: number of bad PEBs:         0
<5>[691828.360581] UBI: number of corrupted PEBs:   0
<5>[691828.365129] UBI: max. allowed volumes:       128
<5>[691828.369862] UBI: wear-leveling threshold:    4096
<5>[691828.374664] UBI: number of internal volumes: 1
<5>[691828.379213] UBI: number of user volumes:     1
<5>[691828.383892] UBI: available PEBs:             0
<5>[691828.388543] UBI: total number of reserved PEBs: 120
<5>[691828.393557] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[691828.399679] UBI: max/mean erase counter: 7/5
<5>[691828.404048] UBI: image sequence number:  1872325126
<5>[691828.409144] UBI: background thread "ubi_bgt2d" started, PID 10968
<5>[691828.529845] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[691828.535961] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[691828.543663] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[691828.551094] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[691828.557030] UBIFS: default compressor: lzo
<5>[691828.561230] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[691828.769178] UBIFS: un-mount UBI device 2, volume 0
<5>[691828.838613] UBI: mtd6 is detached from ubi2
<5>[713430.117224] UBI: attaching mtd6 to ubi2
<5>[713430.121197] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[713430.127570] UBI: logical eraseblock size:    126976 bytes
<5>[713430.133082] UBI: smallest flash I/O unit:    2048
<5>[713430.137886] UBI: VID header offset:          2048 (aligned 2048)
<5>[713430.144003] UBI: data offset:                4096
<5>[713430.252037] UBI: max. sequence number:       579
<5>[713430.267459] UBI: attached mtd6 to ubi2
<5>[713430.271340] UBI: MTD device name:            "config"
<5>[713430.276493] UBI: MTD device size:            15 MiB
<5>[713430.281480] UBI: number of good PEBs:        120
<5>[713430.286229] UBI: number of bad PEBs:         0
<5>[713430.290784] UBI: number of corrupted PEBs:   0
<5>[713430.295327] UBI: max. allowed volumes:       128
<5>[713430.300051] UBI: wear-leveling threshold:    4096
<5>[713430.304854] UBI: number of internal volumes: 1
<5>[713430.309406] UBI: number of user volumes:     1
<5>[713430.313949] UBI: available PEBs:             0
<5>[713430.318498] UBI: total number of reserved PEBs: 120
<5>[713430.323476] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[713430.329592] UBI: max/mean erase counter: 7/5
<5>[713430.333965] UBI: image sequence number:  1872325126
<5>[713430.338976] UBI: background thread "ubi_bgt2d" started, PID 13618
<5>[713430.457175] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[713430.463380] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[713430.471075] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[713430.478500] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[713430.484436] UBIFS: default compressor: lzo
<5>[713430.488637] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[713430.693597] UBIFS: un-mount UBI device 2, volume 0
<5>[713430.768519] UBI: mtd6 is detached from ubi2
<5>[735033.431577] UBI: attaching mtd6 to ubi2
<5>[735033.435517] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[735033.441933] UBI: logical eraseblock size:    126976 bytes
<5>[735033.447434] UBI: smallest flash I/O unit:    2048
<5>[735033.452274] UBI: VID header offset:          2048 (aligned 2048)
<5>[735033.458384] UBI: data offset:                4096
<5>[735033.568504] UBI: max. sequence number:       580
<5>[735033.583885] UBI: attached mtd6 to ubi2
<5>[735033.587741] UBI: MTD device name:            "config"
<5>[735033.592919] UBI: MTD device size:            15 MiB
<5>[735033.597897] UBI: number of good PEBs:        120
<5>[735033.602625] UBI: number of bad PEBs:         0
<5>[735033.607166] UBI: number of corrupted PEBs:   0
<5>[735033.611732] UBI: max. allowed volumes:       128
<5>[735033.616448] UBI: wear-leveling threshold:    4096
<5>[735033.621261] UBI: number of internal volumes: 1
<5>[735033.625802] UBI: number of user volumes:     1
<5>[735033.630349] UBI: available PEBs:             0
<5>[735033.634891] UBI: total number of reserved PEBs: 120
<5>[735033.639873] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[735033.645983] UBI: max/mean erase counter: 7/5
<5>[735033.650355] UBI: image sequence number:  1872325126
<5>[735033.655346] UBI: background thread "ubi_bgt2d" started, PID 16230
<5>[735033.778594] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[735033.784711] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[735033.792416] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[735033.799853] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[735033.805789] UBIFS: default compressor: lzo
<5>[735033.809999] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[735034.013815] UBIFS: un-mount UBI device 2, volume 0
<5>[735034.079163] UBI: mtd6 is detached from ubi2
<5>[756633.513274] UBI: attaching mtd6 to ubi2
<5>[756633.517215] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[756633.523637] UBI: logical eraseblock size:    126976 bytes
<5>[756633.529166] UBI: smallest flash I/O unit:    2048
<5>[756633.533972] UBI: VID header offset:          2048 (aligned 2048)
<5>[756633.540103] UBI: data offset:                4096
<5>[756633.647898] UBI: max. sequence number:       581
<5>[756633.663290] UBI: attached mtd6 to ubi2
<5>[756633.667144] UBI: MTD device name:            "config"
<5>[756633.672340] UBI: MTD device size:            15 MiB
<5>[756633.677320] UBI: number of good PEBs:        120
<5>[756633.682051] UBI: number of bad PEBs:         0
<5>[756633.686593] UBI: number of corrupted PEBs:   0
<5>[756633.691144] UBI: max. allowed volumes:       128
<5>[756633.695860] UBI: wear-leveling threshold:    4096
<5>[756633.700672] UBI: number of internal volumes: 1
<5>[756633.705214] UBI: number of user volumes:     1
<5>[756633.709764] UBI: available PEBs:             0
<5>[756633.714306] UBI: total number of reserved PEBs: 120
<5>[756633.719290] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[756633.725400] UBI: max/mean erase counter: 7/5
<5>[756633.729776] UBI: image sequence number:  1872325126
<5>[756633.734769] UBI: background thread "ubi_bgt2d" started, PID 18512
<5>[756633.851921] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[756633.858038] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[756633.865738] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[756633.873174] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[756633.879125] UBIFS: default compressor: lzo
<5>[756633.883319] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[756634.086934] UBIFS: un-mount UBI device 2, volume 0
<5>[756634.168554] UBI: mtd6 is detached from ubi2
<3>[759408.825659] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
<3>[759408.833029] ata2: irq_stat 0x00400000, PHY RDY changed
<3>[759408.838742] ata2: SError: { RecovComm PHYRdyChg 10B8B }
<6>[759408.844454] ata2: hard resetting link
<4>[759408.848580] Speed down due to signal issue.
<4>[759408.853148] Speed down due to signal issue.
<3>[759420.578456] ata2: softreset failed (device not ready)
<6>[759420.583624] ata2: hard resetting link
<4>[759420.587387] Speed down due to signal issue.
<3>[759431.438461] ata2: softreset failed (device not ready)
<6>[759431.443690] ata2: hard resetting link
<4>[759431.447461] Speed down due to signal issue.
<6>[759435.038483] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
<4>[759435.045441] Check proc_name[ahci].
<6>[759435.049486] ata2.00: configured for UDMA/133
<6>[759435.053873] ata2: EH complete
<3>[759442.380356] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
<3>[759442.387958] ata2.00: irq_stat 0x00400000, PHY RDY changed
<3>[759442.393500] ata2: SError: { RecovComm PHYRdyChg 10B8B }
<3>[759442.398853] ata2.00: failed command: FLUSH CACHE EXT
<3>[759442.403933] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
<3>[759442.403936]          res 40/00:38:88:13:3f/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759442.418352] ata2.00: status: { DRDY }
<6>[759442.422136] ata2: hard resetting link
<4>[759442.425900] Speed down due to signal issue.
<6>[759448.638472] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
<4>[759448.645427] Check proc_name[ahci].
<6>[759448.649531] ata2.00: configured for UDMA/133
<4>[759448.653913] ata2.00: retrying FLUSH 0xea Emask 0x10
<6>[759448.659026] ata2: EH complete
<3>[759452.046380] ata2.00: exception Emask 0x10 SAct 0x107 SErr 0x90002 action 0xe frozen
<3>[759452.054184] ata2.00: irq_stat 0x00400000, PHY RDY changed
<3>[759452.059704] ata2: SError: { RecovComm PHYRdyChg 10B8B }
<3>[759452.065041] ata2.00: failed command: READ FPDMA QUEUED
<3>[759452.070363] ata2.00: cmd 60/40:00:58:89:94/00:00:b9:02:00/40 tag 0 ncq 32768 in
<3>[759452.070368]          res 40/00:40:88:bf:45/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759452.085932] ata2.00: status: { DRDY }
<3>[759452.089707] ata2.00: failed command: READ FPDMA QUEUED
<3>[759452.094958] ata2.00: cmd 60/38:08:b0:5f:94/00:00:b9:02:00/40 tag 1 ncq 28672 in
<3>[759452.094962]          res 40/00:40:88:bf:45/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759452.111205] ata2.00: status: { DRDY }
<3>[759452.115794] ata2.00: failed command: READ FPDMA QUEUED
<3>[759452.121709] ata2.00: cmd 60/08:10:e0:c3:19/00:00:28:00:00/40 tag 2 ncq 4096 in
<3>[759452.121713]          res 40/00:40:88:bf:45/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759452.137175] ata2.00: status: { DRDY }
<3>[759452.140955] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759452.146294] ata2.00: cmd 61/00:40:88:bf:45/04:00:28:00:00/40 tag 8 ncq 524288 out
<3>[759452.146299]          res 40/00:40:88:bf:45/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759452.162010] ata2.00: status: { DRDY }
<6>[759452.165786] ata2: hard resetting link
<4>[759452.169562] Speed down due to signal issue.
<6>[759458.238479] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
<4>[759458.245467] Check proc_name[ahci].
<6>[759458.249576] ata2.00: configured for UDMA/133
<6>[759458.254041] ata2: EH complete
<4>[759466.765001] ata2: limiting SATA link speed to 1.5 Gbps
<3>[759466.770294] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
<3>[759466.777948] ata2.00: irq_stat 0x00400000, PHY RDY changed
<3>[759466.783479] ata2: SError: { RecovComm PHYRdyChg 10B8B }
<3>[759466.788819] ata2.00: failed command: FLUSH CACHE EXT
<3>[759466.793896] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
<3>[759466.793900]          res 40/00:b8:88:b7:54/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759466.808299] ata2.00: status: { DRDY }
<6>[759466.812084] ata2: hard resetting link
<4>[759466.815847] Speed down due to signal issue.
<4>[759466.820142] Speed down due to signal issue.
<6>[759474.068472] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<4>[759474.075420] Check proc_name[ahci].
<6>[759474.079509] ata2.00: configured for UDMA/133
<4>[759474.083894] ata2.00: retrying FLUSH 0xea Emask 0x10
<6>[759474.088980] ata2: EH complete
<3>[759485.807502] ata2.00: exception Emask 0x10 SAct 0xff003 SErr 0x10002 action 0xe frozen
<3>[759485.815484] ata2.00: irq_stat 0x00400000, PHY RDY changed
<3>[759485.821062] ata2: SError: { RecovComm PHYRdyChg }
<3>[759485.825872] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.831227] ata2.00: cmd 61/00:00:88:63:6c/04:00:28:00:00/40 tag 0 ncq 524288 out
<3>[759485.831232]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.846990] ata2.00: status: { DRDY }
<3>[759485.850779] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.856119] ata2.00: cmd 61/00:08:88:67:6c/04:00:28:00:00/40 tag 1 ncq 524288 out
<3>[759485.856123]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.871835] ata2.00: status: { DRDY }
<3>[759485.875599] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.881834] ata2.00: cmd 61/00:60:88:47:6c/04:00:28:00:00/40 tag 12 ncq 524288 out
<3>[759485.881839]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.899034] ata2.00: status: { DRDY }
<3>[759485.902804] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.908144] ata2.00: cmd 61/00:68:88:4b:6c/04:00:28:00:00/40 tag 13 ncq 524288 out
<3>[759485.908148]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.925519] ata2.00: status: { DRDY }
<3>[759485.930195] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.936249] ata2.00: cmd 61/00:70:88:4f:6c/04:00:28:00:00/40 tag 14 ncq 524288 out
<3>[759485.936253]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.952168] ata2.00: status: { DRDY }
<3>[759485.955933] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.961292] ata2.00: cmd 61/00:78:88:53:6c/04:00:28:00:00/40 tag 15 ncq 524288 out
<3>[759485.961296]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759485.977099] ata2.00: status: { DRDY }
<3>[759485.980874] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759485.986212] ata2.00: cmd 61/00:80:88:57:6c/04:00:28:00:00/40 tag 16 ncq 524288 out
<3>[759485.986216]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759486.002022] ata2.00: status: { DRDY }
<3>[759486.005789] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759486.011147] ata2.00: cmd 61/00:88:88:5b:6c/04:00:28:00:00/40 tag 17 ncq 524288 out
<3>[759486.011152]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759486.026947] ata2.00: status: { DRDY }
<3>[759486.030731] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759486.036072] ata2.00: cmd 61/00:90:88:5f:6c/04:00:28:00:00/40 tag 18 ncq 524288 out
<3>[759486.036076]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759486.051892] ata2.00: status: { DRDY }
<3>[759486.055654] ata2.00: failed command: WRITE FPDMA QUEUED
<3>[759486.061005] ata2.00: cmd 61/00:98:88:6b:6c/04:00:28:00:00/40 tag 19 ncq 524288 out
<3>[759486.061009]          res 40/00:98:88:6b:6c/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
<3>[759486.076813] ata2.00: status: { DRDY }
<6>[759486.080624] ata2: hard resetting link
<6>[759493.188490] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<4>[759493.195463] Check proc_name[ahci].
<6>[759493.199560] ata2.00: configured for UDMA/133
<6>[759493.204111] ata2: EH complete
<3>[759506.493008] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10002 action 0xe frozen
<3>[759506.501076] ata2: irq_stat 0x00400000, PHY RDY changed
<3>[759506.506853] ata2: SError: { RecovComm PHYRdyChg }
<6>[759506.512130] ata2: hard resetting link
<6>[759513.798497] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<4>[759513.805470] Check proc_name[ahci].
<6>[759513.809568] ata2.00: configured for UDMA/133
<6>[759513.813947] ata2: EH complete
<5>[778234.208007] UBI: attaching mtd6 to ubi2
<5>[778234.212000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[778234.218372] UBI: logical eraseblock size:    126976 bytes
<5>[778234.223905] UBI: smallest flash I/O unit:    2048
<5>[778234.228726] UBI: VID header offset:          2048 (aligned 2048)
<5>[778234.234836] UBI: data offset:                4096
<5>[778234.342948] UBI: max. sequence number:       582
<5>[778234.358307] UBI: attached mtd6 to ubi2
<5>[778234.362198] UBI: MTD device name:            "config"
<5>[778234.367353] UBI: MTD device size:            15 MiB
<5>[778234.372347] UBI: number of good PEBs:        120
<5>[778234.377067] UBI: number of bad PEBs:         0
<5>[778234.381635] UBI: number of corrupted PEBs:   0
<5>[778234.386186] UBI: max. allowed volumes:       128
<5>[778234.390921] UBI: wear-leveling threshold:    4096
<5>[778234.395723] UBI: number of internal volumes: 1
<5>[778234.400273] UBI: number of user volumes:     1
<5>[778234.404814] UBI: available PEBs:             0
<5>[778234.409362] UBI: total number of reserved PEBs: 120
<5>[778234.414339] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[778234.420455] UBI: max/mean erase counter: 7/5
<5>[778234.424823] UBI: image sequence number:  1872325126
<5>[778234.429889] UBI: background thread "ubi_bgt2d" started, PID 20190
<5>[778234.547538] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[778234.553679] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[778234.561371] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[778234.568803] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[778234.574800] UBIFS: default compressor: lzo
<5>[778234.579013] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[778234.782996] UBIFS: un-mount UBI device 2, volume 0
<5>[778234.838585] UBI: mtd6 is detached from ubi2
<5>[799834.270573] UBI: attaching mtd6 to ubi2
<5>[799834.274513] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[799834.280912] UBI: logical eraseblock size:    126976 bytes
<5>[799834.286413] UBI: smallest flash I/O unit:    2048
<5>[799834.291239] UBI: VID header offset:          2048 (aligned 2048)
<5>[799834.297371] UBI: data offset:                4096
<5>[799834.405300] UBI: max. sequence number:       583
<5>[799834.420688] UBI: attached mtd6 to ubi2
<5>[799834.424541] UBI: MTD device name:            "config"
<5>[799834.429718] UBI: MTD device size:            15 MiB
<5>[799834.434695] UBI: number of good PEBs:        120
<5>[799834.439438] UBI: number of bad PEBs:         0
<5>[799834.443980] UBI: number of corrupted PEBs:   0
<5>[799834.448529] UBI: max. allowed volumes:       128
<5>[799834.453246] UBI: wear-leveling threshold:    4096
<5>[799834.458047] UBI: number of internal volumes: 1
<5>[799834.462599] UBI: number of user volumes:     1
<5>[799834.467141] UBI: available PEBs:             0
<5>[799834.471690] UBI: total number of reserved PEBs: 120
<5>[799834.476668] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[799834.482785] UBI: max/mean erase counter: 7/5
<5>[799834.487154] UBI: image sequence number:  1872325126
<5>[799834.492165] UBI: background thread "ubi_bgt2d" started, PID 22542
<5>[799834.610700] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[799834.616816] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[799834.624514] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[799834.631942] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[799834.637878] UBIFS: default compressor: lzo
<5>[799834.642084] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[799834.847201] UBIFS: un-mount UBI device 2, volume 0
<5>[799834.929744] UBI: mtd6 is detached from ubi2
<5>[821434.348698] UBI: attaching mtd6 to ubi2
<5>[821434.352639] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[821434.359029] UBI: logical eraseblock size:    126976 bytes
<5>[821434.364534] UBI: smallest flash I/O unit:    2048
<5>[821434.369355] UBI: VID header offset:          2048 (aligned 2048)
<5>[821434.375469] UBI: data offset:                4096
<5>[821434.483313] UBI: max. sequence number:       584
<5>[821434.498708] UBI: attached mtd6 to ubi2
<5>[821434.502561] UBI: MTD device name:            "config"
<5>[821434.507713] UBI: MTD device size:            15 MiB
<5>[821434.512732] UBI: number of good PEBs:        120
<5>[821434.517464] UBI: number of bad PEBs:         0
<5>[821434.522044] UBI: number of corrupted PEBs:   0
<5>[821434.526602] UBI: max. allowed volumes:       128
<5>[821434.531340] UBI: wear-leveling threshold:    4096
<5>[821434.536154] UBI: number of internal volumes: 1
<5>[821434.540701] UBI: number of user volumes:     1
<5>[821434.545256] UBI: available PEBs:             0
<5>[821434.549802] UBI: total number of reserved PEBs: 120
<5>[821434.554784] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[821434.560911] UBI: max/mean erase counter: 7/5
<5>[821434.565278] UBI: image sequence number:  1872325126
<5>[821434.570277] UBI: background thread "ubi_bgt2d" started, PID 25085
<5>[821434.690473] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[821434.696589] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[821434.704281] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[821434.711703] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[821434.717637] UBIFS: default compressor: lzo
<5>[821434.721835] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[821434.932105] UBIFS: un-mount UBI device 2, volume 0
<5>[821435.009271] UBI: mtd6 is detached from ubi2
<5>[843034.427211] UBI: attaching mtd6 to ubi2
<5>[843034.431183] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[843034.437562] UBI: logical eraseblock size:    126976 bytes
<5>[843034.443082] UBI: smallest flash I/O unit:    2048
<5>[843034.447885] UBI: VID header offset:          2048 (aligned 2048)
<5>[843034.454005] UBI: data offset:                4096
<5>[843034.562044] UBI: max. sequence number:       587
<5>[843034.577441] UBI: attached mtd6 to ubi2
<5>[843034.581332] UBI: MTD device name:            "config"
<5>[843034.586485] UBI: MTD device size:            15 MiB
<5>[843034.591476] UBI: number of good PEBs:        120
<5>[843034.596192] UBI: number of bad PEBs:         0
<5>[843034.600741] UBI: number of corrupted PEBs:   0
<5>[843034.605282] UBI: max. allowed volumes:       128
<5>[843034.610004] UBI: wear-leveling threshold:    4096
<5>[843034.614807] UBI: number of internal volumes: 1
<5>[843034.619357] UBI: number of user volumes:     1
<5>[843034.623898] UBI: available PEBs:             0
<5>[843034.628446] UBI: total number of reserved PEBs: 120
<5>[843034.633423] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[843034.639539] UBI: max/mean erase counter: 7/5
<5>[843034.643907] UBI: image sequence number:  1872325126
<5>[843034.648931] UBI: background thread "ubi_bgt2d" started, PID 27739
<5>[843034.767766] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[843034.773959] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[843034.781657] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[843034.789083] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[843034.795018] UBIFS: default compressor: lzo
<5>[843034.799223] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[843035.006686] UBIFS: un-mount UBI device 2, volume 0
<5>[843035.079053] UBI: mtd6 is detached from ubi2
<5>[864634.510068] UBI: attaching mtd6 to ubi2
<5>[864634.514009] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[864634.520411] UBI: logical eraseblock size:    126976 bytes
<5>[864634.525913] UBI: smallest flash I/O unit:    2048
<5>[864634.530727] UBI: VID header offset:          2048 (aligned 2048)
<5>[864634.536837] UBI: data offset:                4096
<5>[864634.644648] UBI: max. sequence number:       588
<5>[864634.660073] UBI: attached mtd6 to ubi2
<5>[864634.663929] UBI: MTD device name:            "config"
<5>[864634.669106] UBI: MTD device size:            15 MiB
<5>[864634.674084] UBI: number of good PEBs:        120
<5>[864634.678809] UBI: number of bad PEBs:         0
<5>[864634.683351] UBI: number of corrupted PEBs:   0
<5>[864634.687892] UBI: max. allowed volumes:       128
<5>[864634.692619] UBI: wear-leveling threshold:    4096
<5>[864634.697423] UBI: number of internal volumes: 1
<5>[864634.701973] UBI: number of user volumes:     1
<5>[864634.706515] UBI: available PEBs:             0
<5>[864634.711062] UBI: total number of reserved PEBs: 120
<5>[864634.716039] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[864634.722155] UBI: max/mean erase counter: 7/5
<5>[864634.726523] UBI: image sequence number:  1872325126
<5>[864634.731536] UBI: background thread "ubi_bgt2d" started, PID 30369
<5>[864634.852018] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[864634.858134] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[864634.865832] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[864634.873258] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[864634.879291] UBIFS: default compressor: lzo
<5>[864634.883490] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[864635.122634] UBIFS: un-mount UBI device 2, volume 0
<5>[864635.199116] UBI: mtd6 is detached from ubi2
<5>[886234.584914] UBI: attaching mtd6 to ubi2
<5>[886234.588883] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[886234.595255] UBI: logical eraseblock size:    126976 bytes
<5>[886234.600764] UBI: smallest flash I/O unit:    2048
<5>[886234.605568] UBI: VID header offset:          2048 (aligned 2048)
<5>[886234.611684] UBI: data offset:                4096
<5>[886234.719427] UBI: max. sequence number:       589
<5>[886234.734779] UBI: attached mtd6 to ubi2
<5>[886234.738655] UBI: MTD device name:            "config"
<5>[886234.743810] UBI: MTD device size:            15 MiB
<5>[886234.748796] UBI: number of good PEBs:        120
<5>[886234.753512] UBI: number of bad PEBs:         0
<5>[886234.758052] UBI: number of corrupted PEBs:   0
<5>[886234.762602] UBI: max. allowed volumes:       128
<5>[886234.767319] UBI: wear-leveling threshold:    4096
<5>[886234.772128] UBI: number of internal volumes: 1
<5>[886234.776670] UBI: number of user volumes:     1
<5>[886234.781218] UBI: available PEBs:             0
<5>[886234.785759] UBI: total number of reserved PEBs: 120
<5>[886234.790742] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[886234.796852] UBI: max/mean erase counter: 7/5
<5>[886234.801226] UBI: image sequence number:  1872325126
<5>[886234.806218] UBI: background thread "ubi_bgt2d" started, PID 637
<5>[886234.923943] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[886234.930085] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[886234.937766] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[886234.945199] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[886234.951151] UBIFS: default compressor: lzo
<5>[886234.955347] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[886235.163265] UBIFS: un-mount UBI device 2, volume 0
<5>[886235.248991] UBI: mtd6 is detached from ubi2
<5>[907834.660611] UBI: attaching mtd6 to ubi2
<5>[907834.664550] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[907834.670962] UBI: logical eraseblock size:    126976 bytes
<5>[907834.676481] UBI: smallest flash I/O unit:    2048
<5>[907834.681327] UBI: VID header offset:          2048 (aligned 2048)
<5>[907834.687453] UBI: data offset:                4096
<5>[907834.795362] UBI: max. sequence number:       590
<5>[907834.810762] UBI: attached mtd6 to ubi2
<5>[907834.814616] UBI: MTD device name:            "config"
<5>[907834.819785] UBI: MTD device size:            15 MiB
<5>[907834.824761] UBI: number of good PEBs:        120
<5>[907834.829482] UBI: number of bad PEBs:         0
<5>[907834.834023] UBI: number of corrupted PEBs:   0
<5>[907834.838570] UBI: max. allowed volumes:       128
<5>[907834.843285] UBI: wear-leveling threshold:    4096
<5>[907834.848086] UBI: number of internal volumes: 1
<5>[907834.852632] UBI: number of user volumes:     1
<5>[907834.857172] UBI: available PEBs:             0
<5>[907834.861728] UBI: total number of reserved PEBs: 120
<5>[907834.866705] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[907834.872863] UBI: max/mean erase counter: 7/5
<5>[907834.877231] UBI: image sequence number:  1872325126
<5>[907834.882703] UBI: background thread "ubi_bgt2d" started, PID 3161
<5>[907835.000921] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[907835.007053] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[907835.014758] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[907835.022217] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[907835.028152] UBIFS: default compressor: lzo
<5>[907835.032356] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[907835.243822] UBIFS: un-mount UBI device 2, volume 0
<5>[907838.795421] UBI: mtd6 is detached from ubi2
<5>[929434.737611] UBI: attaching mtd6 to ubi2
<5>[929434.741607] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[929434.747979] UBI: logical eraseblock size:    126976 bytes
<5>[929434.753515] UBI: smallest flash I/O unit:    2048
<5>[929434.758319] UBI: VID header offset:          2048 (aligned 2048)
<5>[929434.764441] UBI: data offset:                4096
<5>[929434.872297] UBI: max. sequence number:       591
<5>[929434.887685] UBI: attached mtd6 to ubi2
<5>[929434.891581] UBI: MTD device name:            "config"
<5>[929434.896735] UBI: MTD device size:            15 MiB
<5>[929434.901729] UBI: number of good PEBs:        120
<5>[929434.906449] UBI: number of bad PEBs:         0
<5>[929434.911005] UBI: number of corrupted PEBs:   0
<5>[929434.915547] UBI: max. allowed volumes:       128
<5>[929434.920273] UBI: wear-leveling threshold:    4096
<5>[929434.925076] UBI: number of internal volumes: 1
<5>[929434.929632] UBI: number of user volumes:     1
<5>[929434.934174] UBI: available PEBs:             0
<5>[929434.938726] UBI: total number of reserved PEBs: 120
<5>[929434.943704] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[929434.949821] UBI: max/mean erase counter: 7/5
<5>[929434.954190] UBI: image sequence number:  1872325126
<5>[929434.959200] UBI: background thread "ubi_bgt2d" started, PID 5860
<5>[929435.077715] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[929435.083874] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[929435.091578] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[929435.099008] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[929435.104943] UBIFS: default compressor: lzo
<5>[929435.109146] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[929435.318275] UBIFS: un-mount UBI device 2, volume 0
<5>[929435.375282] UBI: mtd6 is detached from ubi2
<5>[951036.158280] UBI: attaching mtd6 to ubi2
<5>[951036.162279] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[951036.168672] UBI: logical eraseblock size:    126976 bytes
<5>[951036.174172] UBI: smallest flash I/O unit:    2048
<5>[951036.178987] UBI: VID header offset:          2048 (aligned 2048)
<5>[951036.185097] UBI: data offset:                4096
<5>[951036.292912] UBI: max. sequence number:       592
<5>[951036.308319] UBI: attached mtd6 to ubi2
<5>[951036.312214] UBI: MTD device name:            "config"
<5>[951036.317369] UBI: MTD device size:            15 MiB
<5>[951036.322374] UBI: number of good PEBs:        120
<5>[951036.327091] UBI: number of bad PEBs:         0
<5>[951036.331648] UBI: number of corrupted PEBs:   0
<5>[951036.336191] UBI: max. allowed volumes:       128
<5>[951036.340920] UBI: wear-leveling threshold:    4096
<5>[951036.345724] UBI: number of internal volumes: 1
<5>[951036.350277] UBI: number of user volumes:     1
<5>[951036.354820] UBI: available PEBs:             0
<5>[951036.359370] UBI: total number of reserved PEBs: 120
<5>[951036.364347] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[951036.370465] UBI: max/mean erase counter: 7/5
<5>[951036.374833] UBI: image sequence number:  1872325126
<5>[951036.379843] UBI: background thread "ubi_bgt2d" started, PID 8796
<5>[951036.498182] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[951036.504363] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[951036.512103] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[951036.519552] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[951036.525489] UBIFS: default compressor: lzo
<5>[951036.529691] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[951036.736584] UBIFS: un-mount UBI device 2, volume 0
<5>[951036.815021] UBI: mtd6 is detached from ubi2
<5>[972636.232516] UBI: attaching mtd6 to ubi2
<5>[972636.236454] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[972636.242874] UBI: logical eraseblock size:    126976 bytes
<5>[972636.248376] UBI: smallest flash I/O unit:    2048
<5>[972636.253221] UBI: VID header offset:          2048 (aligned 2048)
<5>[972636.259351] UBI: data offset:                4096
<5>[972636.367343] UBI: max. sequence number:       593
<5>[972636.382761] UBI: attached mtd6 to ubi2
<5>[972636.386615] UBI: MTD device name:            "config"
<5>[972636.391795] UBI: MTD device size:            15 MiB
<5>[972636.396774] UBI: number of good PEBs:        120
<5>[972636.401503] UBI: number of bad PEBs:         0
<5>[972636.406045] UBI: number of corrupted PEBs:   0
<5>[972636.410594] UBI: max. allowed volumes:       128
<5>[972636.415310] UBI: wear-leveling threshold:    4096
<5>[972636.420135] UBI: number of internal volumes: 1
<5>[972636.424678] UBI: number of user volumes:     1
<5>[972636.429226] UBI: available PEBs:             0
<5>[972636.433768] UBI: total number of reserved PEBs: 120
<5>[972636.438751] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[972636.444861] UBI: max/mean erase counter: 7/5
<5>[972636.449234] UBI: image sequence number:  1872325126
<5>[972636.454245] UBI: background thread "ubi_bgt2d" started, PID 11112
<5>[972636.573426] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[972636.579566] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[972636.587253] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[972636.594685] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[972636.600634] UBIFS: default compressor: lzo
<5>[972636.604828] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[972636.811646] UBIFS: un-mount UBI device 2, volume 0
<5>[972636.870024] UBI: mtd6 is detached from ubi2
<5>[994236.304530] UBI: attaching mtd6 to ubi2
<5>[994236.308522] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[994236.314895] UBI: logical eraseblock size:    126976 bytes
<5>[994236.320426] UBI: smallest flash I/O unit:    2048
<5>[994236.325308] UBI: VID header offset:          2048 (aligned 2048)
<5>[994236.331437] UBI: data offset:                4096
<5>[994236.439382] UBI: max. sequence number:       594
<5>[994236.454739] UBI: attached mtd6 to ubi2
<5>[994236.458636] UBI: MTD device name:            "config"
<5>[994236.463791] UBI: MTD device size:            15 MiB
<5>[994236.468783] UBI: number of good PEBs:        120
<5>[994236.473500] UBI: number of bad PEBs:         0
<5>[994236.478046] UBI: number of corrupted PEBs:   0
<5>[994236.482600] UBI: max. allowed volumes:       128
<5>[994236.487317] UBI: wear-leveling threshold:    4096
<5>[994236.492131] UBI: number of internal volumes: 1
<5>[994236.496673] UBI: number of user volumes:     1
<5>[994236.501225] UBI: available PEBs:             0
<5>[994236.505799] UBI: total number of reserved PEBs: 120
<5>[994236.510822] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[994236.516938] UBI: max/mean erase counter: 7/5
<5>[994236.521331] UBI: image sequence number:  1872325126
<5>[994236.526325] UBI: background thread "ubi_bgt2d" started, PID 13734
<5>[994236.652213] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[994236.658331] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[994236.666034] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[994236.673473] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[994236.679418] UBIFS: default compressor: lzo
<5>[994236.683613] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[994236.887992] UBIFS: un-mount UBI device 2, volume 0
<5>[994236.949284] UBI: mtd6 is detached from ubi2
<5>[1015836.383500] UBI: attaching mtd6 to ubi2
<5>[1015836.387527] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1015836.394010] UBI: logical eraseblock size:    126976 bytes
<5>[1015836.399610] UBI: smallest flash I/O unit:    2048
<5>[1015836.404502] UBI: VID header offset:          2048 (aligned 2048)
<5>[1015836.410705] UBI: data offset:                4096
<5>[1015836.518935] UBI: max. sequence number:       595
<5>[1015836.534411] UBI: attached mtd6 to ubi2
<5>[1015836.538351] UBI: MTD device name:            "config"
<5>[1015836.543615] UBI: MTD device size:            15 MiB
<5>[1015836.548689] UBI: number of good PEBs:        120
<5>[1015836.553492] UBI: number of bad PEBs:         0
<5>[1015836.558120] UBI: number of corrupted PEBs:   0
<5>[1015836.562755] UBI: max. allowed volumes:       128
<5>[1015836.567557] UBI: wear-leveling threshold:    4096
<5>[1015836.572454] UBI: number of internal volumes: 1
<5>[1015836.577087] UBI: number of user volumes:     1
<5>[1015836.581726] UBI: available PEBs:             0
<5>[1015836.586361] UBI: total number of reserved PEBs: 120
<5>[1015836.591443] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1015836.597640] UBI: max/mean erase counter: 7/5
<5>[1015836.602102] UBI: image sequence number:  1872325126
<5>[1015836.607182] UBI: background thread "ubi_bgt2d" started, PID 16246
<5>[1015836.730015] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1015836.736218] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1015836.744003] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1015836.751517] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1015836.757540] UBIFS: default compressor: lzo
<5>[1015836.761829] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1015836.967614] UBIFS: un-mount UBI device 2, volume 0
<5>[1015837.049289] UBI: mtd6 is detached from ubi2
<5>[1037436.514333] UBI: attaching mtd6 to ubi2
<5>[1037436.518372] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1037436.524888] UBI: logical eraseblock size:    126976 bytes
<5>[1037436.530506] UBI: smallest flash I/O unit:    2048
<5>[1037436.535404] UBI: VID header offset:          2048 (aligned 2048)
<5>[1037436.541634] UBI: data offset:                4096
<5>[1037436.651049] UBI: max. sequence number:       596
<5>[1037436.666514] UBI: attached mtd6 to ubi2
<5>[1037436.670488] UBI: MTD device name:            "config"
<5>[1037436.675729] UBI: MTD device size:            15 MiB
<5>[1037436.680804] UBI: number of good PEBs:        120
<5>[1037436.685607] UBI: number of bad PEBs:         0
<5>[1037436.690243] UBI: number of corrupted PEBs:   0
<5>[1037436.694871] UBI: max. allowed volumes:       128
<5>[1037436.699679] UBI: wear-leveling threshold:    4096
<5>[1037436.704569] UBI: number of internal volumes: 1
<5>[1037436.709202] UBI: number of user volumes:     1
<5>[1037436.713831] UBI: available PEBs:             0
<5>[1037436.718465] UBI: total number of reserved PEBs: 120
<5>[1037436.723529] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1037436.729731] UBI: max/mean erase counter: 7/5
<5>[1037436.734186] UBI: image sequence number:  1872325126
<5>[1037436.739337] UBI: background thread "ubi_bgt2d" started, PID 19059
<5>[1037436.857686] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1037436.863913] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1037436.871690] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1037436.879201] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1037436.885223] UBIFS: default compressor: lzo
<5>[1037436.889515] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1037437.100239] UBIFS: un-mount UBI device 2, volume 0
<5>[1037437.168580] UBI: mtd6 is detached from ubi2
<5>[1059040.146882] UBI: attaching mtd6 to ubi2
<5>[1059040.151003] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1059040.157494] UBI: logical eraseblock size:    126976 bytes
<5>[1059040.163115] UBI: smallest flash I/O unit:    2048
<5>[1059040.168013] UBI: VID header offset:          2048 (aligned 2048)
<5>[1059040.174224] UBI: data offset:                4096
<5>[1059040.282163] UBI: max. sequence number:       597
<5>[1059040.297622] UBI: attached mtd6 to ubi2
<5>[1059040.301602] UBI: MTD device name:            "config"
<5>[1059040.306843] UBI: MTD device size:            15 MiB
<5>[1059040.311921] UBI: number of good PEBs:        120
<5>[1059040.316725] UBI: number of bad PEBs:         0
<5>[1059040.321361] UBI: number of corrupted PEBs:   0
<5>[1059040.325989] UBI: max. allowed volumes:       128
<5>[1059040.330800] UBI: wear-leveling threshold:    4096
<5>[1059040.335695] UBI: number of internal volumes: 1
<5>[1059040.340342] UBI: number of user volumes:     1
<5>[1059040.344971] UBI: available PEBs:             0
<5>[1059040.349608] UBI: total number of reserved PEBs: 120
<5>[1059040.354672] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1059040.360874] UBI: max/mean erase counter: 7/5
<5>[1059040.365330] UBI: image sequence number:  1872325126
<5>[1059040.370427] UBI: background thread "ubi_bgt2d" started, PID 24157
<5>[1059040.490367] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1059040.496571] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1059040.504357] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1059040.511872] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1059040.517894] UBIFS: default compressor: lzo
<5>[1059040.522182] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1059040.725369] UBIFS: un-mount UBI device 2, volume 0
<5>[1059040.788994] UBI: mtd6 is detached from ubi2
<5>[1080640.228639] UBI: attaching mtd6 to ubi2
<5>[1080640.232667] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1080640.239159] UBI: logical eraseblock size:    126976 bytes
<5>[1080640.244753] UBI: smallest flash I/O unit:    2048
<5>[1080640.249660] UBI: VID header offset:          2048 (aligned 2048)
<5>[1080640.255857] UBI: data offset:                4096
<5>[1080640.363790] UBI: max. sequence number:       598
<5>[1080640.379252] UBI: attached mtd6 to ubi2
<5>[1080640.383193] UBI: MTD device name:            "config"
<5>[1080640.388455] UBI: MTD device size:            15 MiB
<5>[1080640.393518] UBI: number of good PEBs:        120
<5>[1080640.398320] UBI: number of bad PEBs:         0
<5>[1080640.402957] UBI: number of corrupted PEBs:   0
<5>[1080640.407586] UBI: max. allowed volumes:       128
<5>[1080640.412393] UBI: wear-leveling threshold:    4096
<5>[1080640.417282] UBI: number of internal volumes: 1
<5>[1080640.421915] UBI: number of user volumes:     1
<5>[1080640.426542] UBI: available PEBs:             0
<5>[1080640.431174] UBI: total number of reserved PEBs: 120
<5>[1080640.436238] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1080640.442437] UBI: max/mean erase counter: 7/5
<5>[1080640.446890] UBI: image sequence number:  1872325126
<5>[1080640.451973] UBI: background thread "ubi_bgt2d" started, PID 26611
<5>[1080640.568677] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1080640.574880] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1080640.582660] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1080640.590170] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1080640.596192] UBIFS: default compressor: lzo
<5>[1080640.600476] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1080640.804581] UBIFS: un-mount UBI device 2, volume 0
<5>[1080640.869132] UBI: mtd6 is detached from ubi2
<5>[1102244.127225] UBI: attaching mtd6 to ubi2
<5>[1102244.131286] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1102244.137751] UBI: logical eraseblock size:    126976 bytes
<5>[1102244.143386] UBI: smallest flash I/O unit:    2048
<5>[1102244.148278] UBI: VID header offset:          2048 (aligned 2048)
<5>[1102244.154496] UBI: data offset:                4096
<5>[1102244.262653] UBI: max. sequence number:       599
<5>[1102244.278093] UBI: attached mtd6 to ubi2
<5>[1102244.282079] UBI: MTD device name:            "config"
<5>[1102244.287320] UBI: MTD device size:            15 MiB
<5>[1102244.292398] UBI: number of good PEBs:        120
<5>[1102244.297201] UBI: number of bad PEBs:         0
<5>[1102244.301838] UBI: number of corrupted PEBs:   0
<5>[1102244.306468] UBI: max. allowed volumes:       128
<5>[1102244.311279] UBI: wear-leveling threshold:    4096
<5>[1102244.316169] UBI: number of internal volumes: 1
<5>[1102244.320810] UBI: number of user volumes:     1
<5>[1102244.325438] UBI: available PEBs:             0
<5>[1102244.330077] UBI: total number of reserved PEBs: 120
<5>[1102244.335142] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1102244.341349] UBI: max/mean erase counter: 7/5
<5>[1102244.345804] UBI: image sequence number:  1872325126
<5>[1102244.350904] UBI: background thread "ubi_bgt2d" started, PID 29257
<5>[1102244.469889] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1102244.476094] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1102244.483882] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1102244.491398] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1102244.497421] UBIFS: default compressor: lzo
<5>[1102244.501711] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1102244.704957] UBIFS: un-mount UBI device 2, volume 0
<5>[1102244.758541] UBI: mtd6 is detached from ubi2
<5>[1123844.205373] UBI: attaching mtd6 to ubi2
<5>[1123844.209446] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1123844.215905] UBI: logical eraseblock size:    126976 bytes
<5>[1123844.221531] UBI: smallest flash I/O unit:    2048
<5>[1123844.226424] UBI: VID header offset:          2048 (aligned 2048)
<5>[1123844.232639] UBI: data offset:                4096
<5>[1123844.341021] UBI: max. sequence number:       600
<5>[1123844.356490] UBI: attached mtd6 to ubi2
<5>[1123844.360461] UBI: MTD device name:            "config"
<5>[1123844.365702] UBI: MTD device size:            15 MiB
<5>[1123844.370776] UBI: number of good PEBs:        120
<5>[1123844.375578] UBI: number of bad PEBs:         0
<5>[1123844.380215] UBI: number of corrupted PEBs:   0
<5>[1123844.384844] UBI: max. allowed volumes:       128
<5>[1123844.389657] UBI: wear-leveling threshold:    4096
<5>[1123844.394549] UBI: number of internal volumes: 1
<5>[1123844.399184] UBI: number of user volumes:     1
<5>[1123844.403813] UBI: available PEBs:             0
<5>[1123844.408449] UBI: total number of reserved PEBs: 120
<5>[1123844.413514] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1123844.419717] UBI: max/mean erase counter: 7/5
<5>[1123844.424172] UBI: image sequence number:  1872325126
<5>[1123844.429271] UBI: background thread "ubi_bgt2d" started, PID 32233
<5>[1123844.547657] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1123844.553891] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1123844.561687] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1123844.569208] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1123844.575232] UBIFS: default compressor: lzo
<5>[1123844.579522] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1123844.784718] UBIFS: un-mount UBI device 2, volume 0
<5>[1123844.859157] UBI: mtd6 is detached from ubi2
<5>[1145444.286420] UBI: attaching mtd6 to ubi2
<5>[1145444.290498] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1145444.296958] UBI: logical eraseblock size:    126976 bytes
<5>[1145444.302585] UBI: smallest flash I/O unit:    2048
<5>[1145444.307485] UBI: VID header offset:          2048 (aligned 2048)
<5>[1145444.313720] UBI: data offset:                4096
<5>[1145444.421905] UBI: max. sequence number:       601
<5>[1145444.437427] UBI: attached mtd6 to ubi2
<5>[1145444.441414] UBI: MTD device name:            "config"
<5>[1145444.446656] UBI: MTD device size:            15 MiB
<5>[1145444.451734] UBI: number of good PEBs:        120
<5>[1145444.456536] UBI: number of bad PEBs:         0
<5>[1145444.461183] UBI: number of corrupted PEBs:   0
<5>[1145444.465819] UBI: max. allowed volumes:       128
<5>[1145444.470645] UBI: wear-leveling threshold:    4096
<5>[1145444.475536] UBI: number of internal volumes: 1
<5>[1145444.480184] UBI: number of user volumes:     1
<5>[1145444.484814] UBI: available PEBs:             0
<5>[1145444.489453] UBI: total number of reserved PEBs: 120
<5>[1145444.494517] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1145444.500721] UBI: max/mean erase counter: 7/5
<5>[1145444.505176] UBI: image sequence number:  1872325126
<5>[1145444.510275] UBI: background thread "ubi_bgt2d" started, PID 2301
<5>[1145444.629067] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1145444.635271] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1145444.643059] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1145444.650576] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1145444.656598] UBIFS: default compressor: lzo
<5>[1145444.660891] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1145444.876420] UBIFS: un-mount UBI device 2, volume 0
<5>[1145444.925039] UBI: mtd6 is detached from ubi2
<5>[1167044.365279] UBI: attaching mtd6 to ubi2
<5>[1167044.369355] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1167044.375827] UBI: logical eraseblock size:    126976 bytes
<5>[1167044.381434] UBI: smallest flash I/O unit:    2048
<5>[1167044.386326] UBI: VID header offset:          2048 (aligned 2048)
<5>[1167044.392530] UBI: data offset:                4096
<5>[1167044.500677] UBI: max. sequence number:       602
<5>[1167044.516139] UBI: attached mtd6 to ubi2
<5>[1167044.520104] UBI: MTD device name:            "config"
<5>[1167044.525344] UBI: MTD device size:            15 MiB
<5>[1167044.530414] UBI: number of good PEBs:        120
<5>[1167044.535216] UBI: number of bad PEBs:         0
<5>[1167044.539849] UBI: number of corrupted PEBs:   0
<5>[1167044.544477] UBI: max. allowed volumes:       128
<5>[1167044.549283] UBI: wear-leveling threshold:    4096
<5>[1167044.554173] UBI: number of internal volumes: 1
<5>[1167044.558809] UBI: number of user volumes:     1
<5>[1167044.563437] UBI: available PEBs:             0
<5>[1167044.568065] UBI: total number of reserved PEBs: 120
<5>[1167044.573133] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1167044.579334] UBI: max/mean erase counter: 7/5
<5>[1167044.583795] UBI: image sequence number:  1872325126
<5>[1167044.588878] UBI: background thread "ubi_bgt2d" started, PID 4727
<5>[1167044.705466] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1167044.711683] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1167044.719454] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1167044.726957] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1167044.732984] UBIFS: default compressor: lzo
<5>[1167044.737264] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1167044.940617] UBIFS: un-mount UBI device 2, volume 0
<5>[1167044.999038] UBI: mtd6 is detached from ubi2
<5>[1188644.445934] UBI: attaching mtd6 to ubi2
<5>[1188644.450005] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1188644.456465] UBI: logical eraseblock size:    126976 bytes
<5>[1188644.462098] UBI: smallest flash I/O unit:    2048
<5>[1188644.466991] UBI: VID header offset:          2048 (aligned 2048)
<5>[1188644.473199] UBI: data offset:                4096
<5>[1188644.581026] UBI: max. sequence number:       603
<5>[1188644.596481] UBI: attached mtd6 to ubi2
<5>[1188644.600465] UBI: MTD device name:            "config"
<5>[1188644.605707] UBI: MTD device size:            15 MiB
<5>[1188644.610783] UBI: number of good PEBs:        120
<5>[1188644.615586] UBI: number of bad PEBs:         0
<5>[1188644.620222] UBI: number of corrupted PEBs:   0
<5>[1188644.624852] UBI: max. allowed volumes:       128
<5>[1188644.629665] UBI: wear-leveling threshold:    4096
<5>[1188644.634555] UBI: number of internal volumes: 1
<5>[1188644.639190] UBI: number of user volumes:     1
<5>[1188644.643819] UBI: available PEBs:             0
<5>[1188644.648455] UBI: total number of reserved PEBs: 120
<5>[1188644.653520] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1188644.659722] UBI: max/mean erase counter: 7/5
<5>[1188644.664177] UBI: image sequence number:  1872325126
<5>[1188644.669475] UBI: background thread "ubi_bgt2d" started, PID 7202
<5>[1188644.787743] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1188644.793970] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1188644.801762] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1188644.809275] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1188644.815297] UBIFS: default compressor: lzo
<5>[1188644.819602] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1188645.024260] UBIFS: un-mount UBI device 2, volume 0
<5>[1188645.109034] UBI: mtd6 is detached from ubi2
<5>[1210244.525894] UBI: attaching mtd6 to ubi2
<5>[1210244.529972] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1210244.536433] UBI: logical eraseblock size:    126976 bytes
<5>[1210244.542052] UBI: smallest flash I/O unit:    2048
<5>[1210244.546944] UBI: VID header offset:          2048 (aligned 2048)
<5>[1210244.553154] UBI: data offset:                4096
<5>[1210244.661092] UBI: max. sequence number:       604
<5>[1210244.676574] UBI: attached mtd6 to ubi2
<5>[1210244.680549] UBI: MTD device name:            "config"
<5>[1210244.685796] UBI: MTD device size:            15 MiB
<5>[1210244.690876] UBI: number of good PEBs:        120
<5>[1210244.695684] UBI: number of bad PEBs:         0
<5>[1210244.700326] UBI: number of corrupted PEBs:   0
<5>[1210244.704962] UBI: max. allowed volumes:       128
<5>[1210244.709804] UBI: wear-leveling threshold:    4096
<5>[1210244.714714] UBI: number of internal volumes: 1
<5>[1210244.719367] UBI: number of user volumes:     1
<5>[1210244.724003] UBI: available PEBs:             0
<5>[1210244.728649] UBI: total number of reserved PEBs: 120
<5>[1210244.733719] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1210244.739926] UBI: max/mean erase counter: 7/5
<5>[1210244.744380] UBI: image sequence number:  1872325126
<5>[1210244.749466] UBI: background thread "ubi_bgt2d" started, PID 10598
<5>[1210244.872463] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1210244.878685] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1210244.886452] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1210244.893965] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1210244.899996] UBIFS: default compressor: lzo
<5>[1210244.904277] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1210245.112773] UBIFS: un-mount UBI device 2, volume 0
<5>[1210245.171201] UBI: mtd6 is detached from ubi2
<5>[1231844.603110] UBI: attaching mtd6 to ubi2
<5>[1231844.607182] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1231844.613641] UBI: logical eraseblock size:    126976 bytes
<5>[1231844.619262] UBI: smallest flash I/O unit:    2048
<5>[1231844.624154] UBI: VID header offset:          2048 (aligned 2048)
<5>[1231844.630362] UBI: data offset:                4096
<5>[1231844.738521] UBI: max. sequence number:       605
<5>[1231844.753988] UBI: attached mtd6 to ubi2
<5>[1231844.757970] UBI: MTD device name:            "config"
<5>[1231844.763212] UBI: MTD device size:            15 MiB
<5>[1231844.768287] UBI: number of good PEBs:        120
<5>[1231844.773090] UBI: number of bad PEBs:         0
<5>[1231844.777725] UBI: number of corrupted PEBs:   0
<5>[1231844.782354] UBI: max. allowed volumes:       128
<5>[1231844.787163] UBI: wear-leveling threshold:    4096
<5>[1231844.792052] UBI: number of internal volumes: 1
<5>[1231844.796688] UBI: number of user volumes:     1
<5>[1231844.801321] UBI: available PEBs:             0
<5>[1231844.805958] UBI: total number of reserved PEBs: 120
<5>[1231844.811023] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1231844.817226] UBI: max/mean erase counter: 7/5
<5>[1231844.821681] UBI: image sequence number:  1872325126
<5>[1231844.826985] UBI: background thread "ubi_bgt2d" started, PID 13081
<5>[1231844.945472] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1231844.951703] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1231844.959484] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1231844.966997] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1231844.973026] UBIFS: default compressor: lzo
<5>[1231844.977317] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1231845.209346] UBIFS: un-mount UBI device 2, volume 0
<5>[1231845.283075] UBI: mtd6 is detached from ubi2
<5>[1253444.681393] UBI: attaching mtd6 to ubi2
<5>[1253444.685421] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1253444.691913] UBI: logical eraseblock size:    126976 bytes
<5>[1253444.697535] UBI: smallest flash I/O unit:    2048
<5>[1253444.702452] UBI: VID header offset:          2048 (aligned 2048)
<5>[1253444.708663] UBI: data offset:                4096
<5>[1253444.830238] UBI: max. sequence number:       606
<5>[1253444.845687] UBI: attached mtd6 to ubi2
<5>[1253444.849655] UBI: MTD device name:            "config"
<5>[1253444.854906] UBI: MTD device size:            15 MiB
<5>[1253444.859988] UBI: number of good PEBs:        120
<5>[1253444.864798] UBI: number of bad PEBs:         0
<5>[1253444.869445] UBI: number of corrupted PEBs:   0
<5>[1253444.874074] UBI: max. allowed volumes:       128
<5>[1253444.878882] UBI: wear-leveling threshold:    4096
<5>[1253444.883771] UBI: number of internal volumes: 1
<5>[1253444.888403] UBI: number of user volumes:     1
<5>[1253444.893031] UBI: available PEBs:             0
<5>[1253444.897663] UBI: total number of reserved PEBs: 120
<5>[1253444.902726] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1253444.908926] UBI: max/mean erase counter: 7/5
<5>[1253444.913467] UBI: image sequence number:  1872325126
<5>[1253444.918559] UBI: background thread "ubi_bgt2d" started, PID 15598
<5>[1253445.039364] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1253445.045582] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1253445.053359] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1253445.060897] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1253445.066946] UBIFS: default compressor: lzo
<5>[1253445.071243] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1253445.275754] UBIFS: un-mount UBI device 2, volume 0
<5>[1253445.346597] UBI: mtd6 is detached from ubi2
<5>[1275044.781189] UBI: attaching mtd6 to ubi2
<5>[1275044.785227] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1275044.791730] UBI: logical eraseblock size:    126976 bytes
<5>[1275044.797348] UBI: smallest flash I/O unit:    2048
<5>[1275044.802243] UBI: VID header offset:          2048 (aligned 2048)
<5>[1275044.808457] UBI: data offset:                4096
<5>[1275044.916926] UBI: max. sequence number:       607
<5>[1275044.932421] UBI: attached mtd6 to ubi2
<5>[1275044.936390] UBI: MTD device name:            "config"
<5>[1275044.941631] UBI: MTD device size:            15 MiB
<5>[1275044.946705] UBI: number of good PEBs:        120
<5>[1275044.951591] UBI: number of bad PEBs:         0
<5>[1275044.956239] UBI: number of corrupted PEBs:   0
<5>[1275044.960869] UBI: max. allowed volumes:       128
<5>[1275044.965670] UBI: wear-leveling threshold:    4096
<5>[1275044.970568] UBI: number of internal volumes: 1
<5>[1275044.975196] UBI: number of user volumes:     1
<5>[1275044.979831] UBI: available PEBs:             0
<5>[1275044.984460] UBI: total number of reserved PEBs: 120
<5>[1275044.989531] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1275044.995728] UBI: max/mean erase counter: 7/5
<5>[1275045.000198] UBI: image sequence number:  1872325126
<5>[1275045.005486] UBI: background thread "ubi_bgt2d" started, PID 18145
<5>[1275045.130062] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1275045.136285] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1275045.144052] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1275045.151566] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1275045.157602] UBIFS: default compressor: lzo
<5>[1275045.161883] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1275045.365469] UBIFS: un-mount UBI device 2, volume 0
<5>[1275045.436515] UBI: mtd6 is detached from ubi2
<5>[1296644.862903] UBI: attaching mtd6 to ubi2
<5>[1296644.866982] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1296644.873441] UBI: logical eraseblock size:    126976 bytes
<5>[1296644.879055] UBI: smallest flash I/O unit:    2048
<5>[1296644.883947] UBI: VID header offset:          2048 (aligned 2048)
<5>[1296644.890164] UBI: data offset:                4096
<5>[1296644.998246] UBI: max. sequence number:       610
<5>[1296645.013728] UBI: attached mtd6 to ubi2
<5>[1296645.017695] UBI: MTD device name:            "config"
<5>[1296645.022936] UBI: MTD device size:            15 MiB
<5>[1296645.028010] UBI: number of good PEBs:        120
<5>[1296645.032814] UBI: number of bad PEBs:         0
<5>[1296645.037450] UBI: number of corrupted PEBs:   0
<5>[1296645.042079] UBI: max. allowed volumes:       128
<5>[1296645.046889] UBI: wear-leveling threshold:    4096
<5>[1296645.051783] UBI: number of internal volumes: 1
<5>[1296645.056419] UBI: number of user volumes:     1
<5>[1296645.061048] UBI: available PEBs:             0
<5>[1296645.065675] UBI: total number of reserved PEBs: 120
<5>[1296645.070747] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1296645.076950] UBI: max/mean erase counter: 7/5
<5>[1296645.081404] UBI: image sequence number:  1872325126
<5>[1296645.086511] UBI: background thread "ubi_bgt2d" started, PID 20845
<5>[1296645.205510] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1296645.211739] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1296645.219515] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1296645.227027] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1296645.233050] UBIFS: default compressor: lzo
<5>[1296645.237338] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1296645.446543] UBIFS: un-mount UBI device 2, volume 0
<5>[1296645.513027] UBI: mtd6 is detached from ubi2
<5>[1318244.944905] UBI: attaching mtd6 to ubi2
<5>[1318244.948977] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1318244.955436] UBI: logical eraseblock size:    126976 bytes
<5>[1318244.961070] UBI: smallest flash I/O unit:    2048
<5>[1318244.965981] UBI: VID header offset:          2048 (aligned 2048)
<5>[1318244.972178] UBI: data offset:                4096
<5>[1318245.080322] UBI: max. sequence number:       611
<5>[1318245.095776] UBI: attached mtd6 to ubi2
<5>[1318245.099751] UBI: MTD device name:            "config"
<5>[1318245.104992] UBI: MTD device size:            15 MiB
<5>[1318245.110072] UBI: number of good PEBs:        120
<5>[1318245.114879] UBI: number of bad PEBs:         0
<5>[1318245.119518] UBI: number of corrupted PEBs:   0
<5>[1318245.124147] UBI: max. allowed volumes:       128
<5>[1318245.128956] UBI: wear-leveling threshold:    4096
<5>[1318245.133846] UBI: number of internal volumes: 1
<5>[1318245.138483] UBI: number of user volumes:     1
<5>[1318245.143111] UBI: available PEBs:             0
<5>[1318245.147746] UBI: total number of reserved PEBs: 120
<5>[1318245.152810] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1318245.159013] UBI: max/mean erase counter: 7/6
<5>[1318245.163468] UBI: image sequence number:  1872325126
<5>[1318245.168622] UBI: background thread "ubi_bgt2d" started, PID 23401
<5>[1318245.287709] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1318245.293913] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1318245.301698] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1318245.309212] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1318245.315234] UBIFS: default compressor: lzo
<5>[1318245.319523] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1318245.530251] UBIFS: un-mount UBI device 2, volume 0
<5>[1318245.596599] UBI: mtd6 is detached from ubi2
<5>[1339845.013029] UBI: attaching mtd6 to ubi2
<5>[1339845.017112] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1339845.023592] UBI: logical eraseblock size:    126976 bytes
<5>[1339845.029205] UBI: smallest flash I/O unit:    2048
<5>[1339845.034104] UBI: VID header offset:          2048 (aligned 2048)
<5>[1339845.040310] UBI: data offset:                4096
<5>[1339845.148434] UBI: max. sequence number:       612
<5>[1339845.163864] UBI: attached mtd6 to ubi2
<5>[1339845.167837] UBI: MTD device name:            "config"
<5>[1339845.173078] UBI: MTD device size:            15 MiB
<5>[1339845.178159] UBI: number of good PEBs:        120
<5>[1339845.182962] UBI: number of bad PEBs:         0
<5>[1339845.187598] UBI: number of corrupted PEBs:   0
<5>[1339845.192231] UBI: max. allowed volumes:       128
<5>[1339845.197040] UBI: wear-leveling threshold:    4096
<5>[1339845.201963] UBI: number of internal volumes: 1
<5>[1339845.206627] UBI: number of user volumes:     1
<5>[1339845.211263] UBI: available PEBs:             0
<5>[1339845.215899] UBI: total number of reserved PEBs: 120
<5>[1339845.220979] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1339845.227181] UBI: max/mean erase counter: 7/6
<5>[1339845.231635] UBI: image sequence number:  1872325126
<5>[1339845.236727] UBI: background thread "ubi_bgt2d" started, PID 25768
<5>[1339845.360716] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1339845.366940] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1339845.374707] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1339845.382216] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1339845.388248] UBIFS: default compressor: lzo
<5>[1339845.392555] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1339845.597358] UBIFS: un-mount UBI device 2, volume 0
<5>[1339845.677548] UBI: mtd6 is detached from ubi2
<5>[1361445.096322] UBI: attaching mtd6 to ubi2
<5>[1361445.100362] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1361445.106860] UBI: logical eraseblock size:    126976 bytes
<5>[1361445.112447] UBI: smallest flash I/O unit:    2048
<5>[1361445.117362] UBI: VID header offset:          2048 (aligned 2048)
<5>[1361445.123559] UBI: data offset:                4096
<5>[1361445.231647] UBI: max. sequence number:       613
<5>[1361445.247118] UBI: attached mtd6 to ubi2
<5>[1361445.251059] UBI: MTD device name:            "config"
<5>[1361445.256320] UBI: MTD device size:            15 MiB
<5>[1361445.261383] UBI: number of good PEBs:        120
<5>[1361445.266196] UBI: number of bad PEBs:         0
<5>[1361445.270826] UBI: number of corrupted PEBs:   0
<5>[1361445.275453] UBI: max. allowed volumes:       128
<5>[1361445.280266] UBI: wear-leveling threshold:    4096
<5>[1361445.285156] UBI: number of internal volumes: 1
<5>[1361445.289792] UBI: number of user volumes:     1
<5>[1361445.294421] UBI: available PEBs:             0
<5>[1361445.299055] UBI: total number of reserved PEBs: 120
<5>[1361445.304120] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1361445.310324] UBI: max/mean erase counter: 7/6
<5>[1361445.314779] UBI: image sequence number:  1872325126
<5>[1361445.319877] UBI: background thread "ubi_bgt2d" started, PID 28126
<5>[1361445.438872] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1361445.445087] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1361445.452877] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1361445.460391] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1361445.466421] UBIFS: default compressor: lzo
<5>[1361445.470703] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1361445.674094] UBIFS: un-mount UBI device 2, volume 0
<5>[1361445.736544] UBI: mtd6 is detached from ubi2
<5>[1383047.168788] UBI: attaching mtd6 to ubi2
<5>[1383047.172819] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1383047.179320] UBI: logical eraseblock size:    126976 bytes
<5>[1383047.184907] UBI: smallest flash I/O unit:    2048
<5>[1383047.189816] UBI: VID header offset:          2048 (aligned 2048)
<5>[1383047.196028] UBI: data offset:                4096
<5>[1383047.321402] UBI: max. sequence number:       614
<5>[1383047.337074] UBI: attached mtd6 to ubi2
<5>[1383047.341016] UBI: MTD device name:            "config"
<5>[1383047.346290] UBI: MTD device size:            15 MiB
<5>[1383047.351355] UBI: number of good PEBs:        120
<5>[1383047.356259] UBI: number of bad PEBs:         0
<5>[1383047.360949] UBI: number of corrupted PEBs:   0
<5>[1383047.365618] UBI: max. allowed volumes:       128
<5>[1383047.370441] UBI: wear-leveling threshold:    4096
<5>[1383047.375331] UBI: number of internal volumes: 1
<5>[1383047.379972] UBI: number of user volumes:     1
<5>[1383047.384600] UBI: available PEBs:             0
<5>[1383047.389300] UBI: total number of reserved PEBs: 120
<5>[1383047.394442] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1383047.400703] UBI: max/mean erase counter: 7/6
<5>[1383047.405238] UBI: image sequence number:  1872325126
<5>[1383047.410431] UBI: background thread "ubi_bgt2d" started, PID 30955
<5>[1383047.530504] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1383047.536753] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1383047.544522] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1383047.552041] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1383047.558078] UBIFS: default compressor: lzo
<5>[1383047.562361] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1383047.767637] UBIFS: un-mount UBI device 2, volume 0
<5>[1383047.877094] UBI: mtd6 is detached from ubi2
<4>[1387021.321126] rule type=2, num=2
<5>[1404647.269810] UBI: attaching mtd6 to ubi2
<5>[1404647.273837] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1404647.280323] UBI: logical eraseblock size:    126976 bytes
<5>[1404647.285950] UBI: smallest flash I/O unit:    2048
<5>[1404647.290859] UBI: VID header offset:          2048 (aligned 2048)
<5>[1404647.297079] UBI: data offset:                4096
<5>[1404647.405320] UBI: max. sequence number:       615
<5>[1404647.420809] UBI: attached mtd6 to ubi2
<5>[1404647.424774] UBI: MTD device name:            "config"
<5>[1404647.430040] UBI: MTD device size:            15 MiB
<5>[1404647.435106] UBI: number of good PEBs:        120
<5>[1404647.439920] UBI: number of bad PEBs:         0
<5>[1404647.444549] UBI: number of corrupted PEBs:   0
<5>[1404647.449200] UBI: max. allowed volumes:       128
<5>[1404647.454004] UBI: wear-leveling threshold:    4096
<5>[1404647.458901] UBI: number of internal volumes: 1
<5>[1404647.463530] UBI: number of user volumes:     1
<5>[1404647.468164] UBI: available PEBs:             0
<5>[1404647.472792] UBI: total number of reserved PEBs: 120
<5>[1404647.477868] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1404647.484069] UBI: max/mean erase counter: 7/6
<5>[1404647.488537] UBI: image sequence number:  1872325126
<5>[1404647.493615] UBI: background thread "ubi_bgt2d" started, PID 2632
<5>[1404647.611222] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1404647.617451] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1404647.625217] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1404647.632731] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1404647.638762] UBIFS: default compressor: lzo
<5>[1404647.643044] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1404647.849321] UBIFS: un-mount UBI device 2, volume 0
<5>[1404647.916081] UBI: mtd6 is detached from ubi2
<5>[1426247.335958] UBI: attaching mtd6 to ubi2
<5>[1426247.339987] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1426247.346467] UBI: logical eraseblock size:    126976 bytes
<5>[1426247.352061] UBI: smallest flash I/O unit:    2048
<5>[1426247.356972] UBI: VID header offset:          2048 (aligned 2048)
<5>[1426247.363179] UBI: data offset:                4096
<5>[1426247.471152] UBI: max. sequence number:       616
<5>[1426247.486615] UBI: attached mtd6 to ubi2
<5>[1426247.490554] UBI: MTD device name:            "config"
<5>[1426247.495793] UBI: MTD device size:            15 MiB
<5>[1426247.500881] UBI: number of good PEBs:        120
<5>[1426247.505683] UBI: number of bad PEBs:         0
<5>[1426247.510318] UBI: number of corrupted PEBs:   0
<5>[1426247.514946] UBI: max. allowed volumes:       128
<5>[1426247.519752] UBI: wear-leveling threshold:    4096
<5>[1426247.524640] UBI: number of internal volumes: 1
<5>[1426247.529273] UBI: number of user volumes:     1
<5>[1426247.533900] UBI: available PEBs:             0
<5>[1426247.538532] UBI: total number of reserved PEBs: 120
<5>[1426247.543595] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1426247.549801] UBI: max/mean erase counter: 7/6
<5>[1426247.554256] UBI: image sequence number:  1872325126
<5>[1426247.559335] UBI: background thread "ubi_bgt2d" started, PID 5082
<5>[1426247.675896] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1426247.682121] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1426247.689922] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1426247.697458] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1426247.703497] UBIFS: default compressor: lzo
<5>[1426247.707801] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1426247.912252] UBIFS: un-mount UBI device 2, volume 0
<5>[1426247.967042] UBI: mtd6 is detached from ubi2
<5>[1447847.417020] UBI: attaching mtd6 to ubi2
<5>[1447847.421048] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1447847.427549] UBI: logical eraseblock size:    126976 bytes
<5>[1447847.433257] UBI: smallest flash I/O unit:    2048
<5>[1447847.438172] UBI: VID header offset:          2048 (aligned 2048)
<5>[1447847.444369] UBI: data offset:                4096
<5>[1447847.552289] UBI: max. sequence number:       617
<5>[1447847.567764] UBI: attached mtd6 to ubi2
<5>[1447847.571706] UBI: MTD device name:            "config"
<5>[1447847.576976] UBI: MTD device size:            15 MiB
<5>[1447847.582040] UBI: number of good PEBs:        120
<5>[1447847.586854] UBI: number of bad PEBs:         0
<5>[1447847.591484] UBI: number of corrupted PEBs:   0
<5>[1447847.596120] UBI: max. allowed volumes:       128
<5>[1447847.600923] UBI: wear-leveling threshold:    4096
<5>[1447847.605813] UBI: number of internal volumes: 1
<5>[1447847.610447] UBI: number of user volumes:     1
<5>[1447847.615075] UBI: available PEBs:             0
<5>[1447847.619710] UBI: total number of reserved PEBs: 120
<5>[1447847.624774] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1447847.630978] UBI: max/mean erase counter: 7/6
<5>[1447847.635432] UBI: image sequence number:  1872325126
<5>[1447847.640531] UBI: background thread "ubi_bgt2d" started, PID 8772
<5>[1447847.758832] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1447847.765036] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1447847.772822] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1447847.780337] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1447847.786373] UBIFS: default compressor: lzo
<5>[1447847.790660] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1447848.009520] UBIFS: un-mount UBI device 2, volume 0
<5>[1447848.086562] UBI: mtd6 is detached from ubi2
<5>[1469447.485661] UBI: attaching mtd6 to ubi2
<5>[1469447.489749] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1469447.496233] UBI: logical eraseblock size:    126976 bytes
<5>[1469447.501821] UBI: smallest flash I/O unit:    2048
<5>[1469447.506732] UBI: VID header offset:          2048 (aligned 2048)
<5>[1469447.512928] UBI: data offset:                4096
<5>[1469447.623762] UBI: max. sequence number:       618
<5>[1469447.639252] UBI: attached mtd6 to ubi2
<5>[1469447.643201] UBI: MTD device name:            "config"
<5>[1469447.648470] UBI: MTD device size:            15 MiB
<5>[1469447.653540] UBI: number of good PEBs:        120
<5>[1469447.658372] UBI: number of bad PEBs:         0
<5>[1469447.662993] UBI: number of corrupted PEBs:   0
<5>[1469447.667638] UBI: max. allowed volumes:       128
<5>[1469447.672444] UBI: wear-leveling threshold:    4096
<5>[1469447.677350] UBI: number of internal volumes: 1
<5>[1469447.681979] UBI: number of user volumes:     1
<5>[1469447.686615] UBI: available PEBs:             0
<5>[1469447.691244] UBI: total number of reserved PEBs: 120
<5>[1469447.696315] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1469447.702511] UBI: max/mean erase counter: 7/6
<5>[1469447.706972] UBI: image sequence number:  1872325126
<5>[1469447.712050] UBI: background thread "ubi_bgt2d" started, PID 11603
<5>[1469447.834081] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1469447.840314] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1469447.848091] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1469447.855595] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1469447.861629] UBIFS: default compressor: lzo
<5>[1469447.865910] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1469448.069295] UBIFS: un-mount UBI device 2, volume 0
<5>[1469448.146449] UBI: mtd6 is detached from ubi2
<5>[1491047.565201] UBI: attaching mtd6 to ubi2
<5>[1491047.569262] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1491047.575728] UBI: logical eraseblock size:    126976 bytes
<5>[1491047.581353] UBI: smallest flash I/O unit:    2048
<5>[1491047.586272] UBI: VID header offset:          2048 (aligned 2048)
<5>[1491047.592468] UBI: data offset:                4096
<5>[1491047.700336] UBI: max. sequence number:       619
<5>[1491047.715772] UBI: attached mtd6 to ubi2
<5>[1491047.719753] UBI: MTD device name:            "config"
<5>[1491047.724994] UBI: MTD device size:            15 MiB
<5>[1491047.730077] UBI: number of good PEBs:        120
<5>[1491047.734881] UBI: number of bad PEBs:         0
<5>[1491047.739532] UBI: number of corrupted PEBs:   0
<5>[1491047.744162] UBI: max. allowed volumes:       128
<5>[1491047.748977] UBI: wear-leveling threshold:    4096
<5>[1491047.753869] UBI: number of internal volumes: 1
<5>[1491047.758520] UBI: number of user volumes:     1
<5>[1491047.763157] UBI: available PEBs:             0
<5>[1491047.767854] UBI: total number of reserved PEBs: 120
<5>[1491047.772982] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1491047.779199] UBI: max/mean erase counter: 7/6
<5>[1491047.783656] UBI: image sequence number:  1872325126
<5>[1491047.788797] UBI: background thread "ubi_bgt2d" started, PID 14654
<5>[1491047.908465] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1491047.914668] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1491047.922486] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1491047.930086] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1491047.936132] UBIFS: default compressor: lzo
<5>[1491047.940415] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1491048.144261] UBIFS: un-mount UBI device 2, volume 0
<5>[1491048.206121] UBI: mtd6 is detached from ubi2
<5>[1512651.119843] UBI: attaching mtd6 to ubi2
<5>[1512651.123882] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1512651.130373] UBI: logical eraseblock size:    126976 bytes
<5>[1512651.135980] UBI: smallest flash I/O unit:    2048
<5>[1512651.140873] UBI: VID header offset:          2048 (aligned 2048)
<5>[1512651.147079] UBI: data offset:                4096
<5>[1512651.254955] UBI: max. sequence number:       620
<5>[1512651.270409] UBI: attached mtd6 to ubi2
<5>[1512651.274349] UBI: MTD device name:            "config"
<5>[1512651.279604] UBI: MTD device size:            15 MiB
<5>[1512651.284668] UBI: number of good PEBs:        120
<5>[1512651.289488] UBI: number of bad PEBs:         0
<5>[1512651.294117] UBI: number of corrupted PEBs:   0
<5>[1512651.298751] UBI: max. allowed volumes:       128
<5>[1512651.303554] UBI: wear-leveling threshold:    4096
<5>[1512651.308448] UBI: number of internal volumes: 1
<5>[1512651.313076] UBI: number of user volumes:     1
<5>[1512651.317707] UBI: available PEBs:             0
<5>[1512651.322335] UBI: total number of reserved PEBs: 120
<5>[1512651.327403] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1512651.333598] UBI: max/mean erase counter: 7/6
<5>[1512651.338058] UBI: image sequence number:  1872325126
<5>[1512651.343199] UBI: background thread "ubi_bgt2d" started, PID 17562
<5>[1512651.463447] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1512651.469686] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1512651.477471] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1512651.484980] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1512651.491011] UBIFS: default compressor: lzo
<5>[1512651.495291] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1512651.707620] UBIFS: un-mount UBI device 2, volume 0
<5>[1512655.197559] UBI: mtd6 is detached from ubi2
<5>[1534251.180614] UBI: attaching mtd6 to ubi2
<5>[1534251.184640] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1534251.191126] UBI: logical eraseblock size:    126976 bytes
<5>[1534251.196733] UBI: smallest flash I/O unit:    2048
<5>[1534251.201625] UBI: VID header offset:          2048 (aligned 2048)
<5>[1534251.207832] UBI: data offset:                4096
<5>[1534251.315954] UBI: max. sequence number:       621
<5>[1534251.331429] UBI: attached mtd6 to ubi2
<5>[1534251.335370] UBI: MTD device name:            "config"
<5>[1534251.340633] UBI: MTD device size:            15 MiB
<5>[1534251.345698] UBI: number of good PEBs:        120
<5>[1534251.350511] UBI: number of bad PEBs:         0
<5>[1534251.355139] UBI: number of corrupted PEBs:   0
<5>[1534251.359780] UBI: max. allowed volumes:       128
<5>[1534251.364602] UBI: wear-leveling threshold:    4096
<5>[1534251.369510] UBI: number of internal volumes: 1
<5>[1534251.374140] UBI: number of user volumes:     1
<5>[1534251.378779] UBI: available PEBs:             0
<5>[1534251.383408] UBI: total number of reserved PEBs: 120
<5>[1534251.388479] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1534251.394675] UBI: max/mean erase counter: 7/6
<5>[1534251.399136] UBI: image sequence number:  1872325126
<5>[1534251.404212] UBI: background thread "ubi_bgt2d" started, PID 20587
<5>[1534251.527083] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1534251.533287] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1534251.541073] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1534251.548588] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1534251.554610] UBIFS: default compressor: lzo
<5>[1534251.558899] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1534251.763649] UBIFS: un-mount UBI device 2, volume 0
<5>[1534251.819815] UBI: mtd6 is detached from ubi2
<5>[1555851.259373] UBI: attaching mtd6 to ubi2
<5>[1555851.263399] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1555851.269889] UBI: logical eraseblock size:    126976 bytes
<5>[1555851.275477] UBI: smallest flash I/O unit:    2048
<5>[1555851.280381] UBI: VID header offset:          2048 (aligned 2048)
<5>[1555851.286587] UBI: data offset:                4096
<5>[1555851.395306] UBI: max. sequence number:       622
<5>[1555851.410818] UBI: attached mtd6 to ubi2
<5>[1555851.414823] UBI: MTD device name:            "config"
<5>[1555851.420105] UBI: MTD device size:            15 MiB
<5>[1555851.425171] UBI: number of good PEBs:        120
<5>[1555851.430035] UBI: number of bad PEBs:         0
<5>[1555851.434665] UBI: number of corrupted PEBs:   0
<5>[1555851.439305] UBI: max. allowed volumes:       128
<5>[1555851.444108] UBI: wear-leveling threshold:    4096
<5>[1555851.449006] UBI: number of internal volumes: 1
<5>[1555851.453636] UBI: number of user volumes:     1
<5>[1555851.458271] UBI: available PEBs:             0
<5>[1555851.462900] UBI: total number of reserved PEBs: 120
<5>[1555851.467988] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1555851.474204] UBI: max/mean erase counter: 7/6
<5>[1555851.478691] UBI: image sequence number:  1872325126
<5>[1555851.483844] UBI: background thread "ubi_bgt2d" started, PID 23915
<5>[1555851.605719] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1555851.611943] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1555851.619723] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1555851.627235] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1555851.633258] UBIFS: default compressor: lzo
<5>[1555851.637550] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1555851.845547] UBIFS: un-mount UBI device 2, volume 0
<5>[1555851.926599] UBI: mtd6 is detached from ubi2
<5>[1577451.380047] UBI: attaching mtd6 to ubi2
<5>[1577451.384078] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1577451.390567] UBI: logical eraseblock size:    126976 bytes
<5>[1577451.396166] UBI: smallest flash I/O unit:    2048
<5>[1577451.401058] UBI: VID header offset:          2048 (aligned 2048)
<5>[1577451.407262] UBI: data offset:                4096
<5>[1577451.515321] UBI: max. sequence number:       623
<5>[1577451.530811] UBI: attached mtd6 to ubi2
<5>[1577451.534753] UBI: MTD device name:            "config"
<5>[1577451.540023] UBI: MTD device size:            15 MiB
<5>[1577451.545088] UBI: number of good PEBs:        120
<5>[1577451.549899] UBI: number of bad PEBs:         0
<5>[1577451.554528] UBI: number of corrupted PEBs:   0
<5>[1577451.559162] UBI: max. allowed volumes:       128
<5>[1577451.563965] UBI: wear-leveling threshold:    4096
<5>[1577451.568862] UBI: number of internal volumes: 1
<5>[1577451.573507] UBI: number of user volumes:     1
<5>[1577451.578154] UBI: available PEBs:             0
<5>[1577451.582783] UBI: total number of reserved PEBs: 120
<5>[1577451.587853] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1577451.594050] UBI: max/mean erase counter: 7/6
<5>[1577451.598511] UBI: image sequence number:  1872325126
<5>[1577451.603588] UBI: background thread "ubi_bgt2d" started, PID 27022
<5>[1577451.734851] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1577451.741077] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1577451.748855] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1577451.756367] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1577451.762395] UBIFS: default compressor: lzo
<5>[1577451.766693] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1577451.973507] UBIFS: un-mount UBI device 2, volume 0
<5>[1577452.047895] UBI: mtd6 is detached from ubi2
<5>[1599051.430032] UBI: attaching mtd6 to ubi2
<5>[1599051.434059] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1599051.440567] UBI: logical eraseblock size:    126976 bytes
<5>[1599051.446190] UBI: smallest flash I/O unit:    2048
<5>[1599051.451092] UBI: VID header offset:          2048 (aligned 2048)
<5>[1599051.457302] UBI: data offset:                4096
<5>[1599051.565304] UBI: max. sequence number:       624
<5>[1599051.580761] UBI: attached mtd6 to ubi2
<5>[1599051.584702] UBI: MTD device name:            "config"
<5>[1599051.589971] UBI: MTD device size:            15 MiB
<5>[1599051.595035] UBI: number of good PEBs:        120
<5>[1599051.599845] UBI: number of bad PEBs:         0
<5>[1599051.604474] UBI: number of corrupted PEBs:   0
<5>[1599051.609108] UBI: max. allowed volumes:       128
<5>[1599051.613911] UBI: wear-leveling threshold:    4096
<5>[1599051.618811] UBI: number of internal volumes: 1
<5>[1599051.623439] UBI: number of user volumes:     1
<5>[1599051.628084] UBI: available PEBs:             0
<5>[1599051.632712] UBI: total number of reserved PEBs: 120
<5>[1599051.637784] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1599051.643980] UBI: max/mean erase counter: 7/6
<5>[1599051.648440] UBI: image sequence number:  1872325126
<5>[1599051.653520] UBI: background thread "ubi_bgt2d" started, PID 29609
<5>[1599051.769670] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1599051.775874] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1599051.783674] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1599051.791263] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1599051.797305] UBIFS: default compressor: lzo
<5>[1599051.801587] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1599052.005277] UBIFS: un-mount UBI device 2, volume 0
<5>[1599052.076495] UBI: mtd6 is detached from ubi2
<5>[1620651.504932] UBI: attaching mtd6 to ubi2
<5>[1620651.508989] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1620651.515447] UBI: logical eraseblock size:    126976 bytes
<5>[1620651.521070] UBI: smallest flash I/O unit:    2048
<5>[1620651.525993] UBI: VID header offset:          2048 (aligned 2048)
<5>[1620651.532239] UBI: data offset:                4096
<5>[1620651.640151] UBI: max. sequence number:       625
<5>[1620651.655613] UBI: attached mtd6 to ubi2
<5>[1620651.659596] UBI: MTD device name:            "config"
<5>[1620651.664838] UBI: MTD device size:            15 MiB
<5>[1620651.669915] UBI: number of good PEBs:        120
<5>[1620651.674718] UBI: number of bad PEBs:         0
<5>[1620651.679367] UBI: number of corrupted PEBs:   0
<5>[1620651.684004] UBI: max. allowed volumes:       128
<5>[1620651.688846] UBI: wear-leveling threshold:    4096
<5>[1620651.693742] UBI: number of internal volumes: 1
<5>[1620651.698389] UBI: number of user volumes:     1
<5>[1620651.703018] UBI: available PEBs:             0
<5>[1620651.707655] UBI: total number of reserved PEBs: 120
<5>[1620651.712720] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1620651.718924] UBI: max/mean erase counter: 7/6
<5>[1620651.723379] UBI: image sequence number:  1872325126
<5>[1620651.728535] UBI: background thread "ubi_bgt2d" started, PID 32357
<5>[1620651.847326] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1620651.853530] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1620651.861318] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1620651.868835] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1620651.874857] UBIFS: default compressor: lzo
<5>[1620651.879193] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1620652.087318] UBIFS: un-mount UBI device 2, volume 0
<5>[1620652.167101] UBI: mtd6 is detached from ubi2
<5>[1642251.587669] UBI: attaching mtd6 to ubi2
<5>[1642251.591696] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1642251.598178] UBI: logical eraseblock size:    126976 bytes
<5>[1642251.603776] UBI: smallest flash I/O unit:    2048
<5>[1642251.608707] UBI: VID header offset:          2048 (aligned 2048)
<5>[1642251.614910] UBI: data offset:                4096
<5>[1642251.729283] UBI: max. sequence number:       626
<5>[1642251.744738] UBI: attached mtd6 to ubi2
<5>[1642251.748737] UBI: MTD device name:            "config"
<5>[1642251.753981] UBI: MTD device size:            15 MiB
<5>[1642251.759053] UBI: number of good PEBs:        120
<5>[1642251.763856] UBI: number of bad PEBs:         0
<5>[1642251.768492] UBI: number of corrupted PEBs:   0
<5>[1642251.773120] UBI: max. allowed volumes:       128
<5>[1642251.777928] UBI: wear-leveling threshold:    4096
<5>[1642251.782818] UBI: number of internal volumes: 1
<5>[1642251.787453] UBI: number of user volumes:     1
<5>[1642251.792081] UBI: available PEBs:             0
<5>[1642251.796716] UBI: total number of reserved PEBs: 120
<5>[1642251.801785] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1642251.807991] UBI: max/mean erase counter: 7/6
<5>[1642251.812446] UBI: image sequence number:  1872325126
<5>[1642251.817545] UBI: background thread "ubi_bgt2d" started, PID 2739
<5>[1642251.935919] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1642251.942195] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1642251.950000] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1642251.957552] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1642251.963592] UBIFS: default compressor: lzo
<5>[1642251.967900] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1642252.172257] UBIFS: un-mount UBI device 2, volume 0
<5>[1642252.272513] UBI: mtd6 is detached from ubi2
<5>[1663851.661216] UBI: attaching mtd6 to ubi2
<5>[1663851.665246] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1663851.671756] UBI: logical eraseblock size:    126976 bytes
<5>[1663851.677372] UBI: smallest flash I/O unit:    2048
<5>[1663851.682264] UBI: VID header offset:          2048 (aligned 2048)
<5>[1663851.688470] UBI: data offset:                4096
<5>[1663851.797275] UBI: max. sequence number:       627
<5>[1663851.812801] UBI: attached mtd6 to ubi2
<5>[1663851.816769] UBI: MTD device name:            "config"
<5>[1663851.822010] UBI: MTD device size:            15 MiB
<5>[1663851.827085] UBI: number of good PEBs:        120
<5>[1663851.831888] UBI: number of bad PEBs:         0
<5>[1663851.836527] UBI: number of corrupted PEBs:   0
<5>[1663851.841156] UBI: max. allowed volumes:       128
<5>[1663851.845966] UBI: wear-leveling threshold:    4096
<5>[1663851.850856] UBI: number of internal volumes: 1
<5>[1663851.855483] UBI: number of user volumes:     1
<5>[1663851.860118] UBI: available PEBs:             0
<5>[1663851.864752] UBI: total number of reserved PEBs: 120
<5>[1663851.869841] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1663851.876047] UBI: max/mean erase counter: 7/6
<5>[1663851.880505] UBI: image sequence number:  1872325126
<5>[1663851.885584] UBI: background thread "ubi_bgt2d" started, PID 5202
<5>[1663852.007722] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1663852.013925] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1663852.021711] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1663852.029225] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1663852.035248] UBIFS: default compressor: lzo
<5>[1663852.039541] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1663852.244752] UBIFS: un-mount UBI device 2, volume 0
<5>[1663852.336525] UBI: mtd6 is detached from ubi2
<5>[1685451.763140] UBI: attaching mtd6 to ubi2
<5>[1685451.767220] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1685451.773680] UBI: logical eraseblock size:    126976 bytes
<5>[1685451.779383] UBI: smallest flash I/O unit:    2048
<5>[1685451.784276] UBI: VID header offset:          2048 (aligned 2048)
<5>[1685451.790499] UBI: data offset:                4096
<5>[1685451.898903] UBI: max. sequence number:       628
<5>[1685451.914328] UBI: attached mtd6 to ubi2
<5>[1685451.918296] UBI: MTD device name:            "config"
<5>[1685451.923652] UBI: MTD device size:            15 MiB
<5>[1685451.928747] UBI: number of good PEBs:        120
<5>[1685451.933612] UBI: number of bad PEBs:         0
<5>[1685451.938252] UBI: number of corrupted PEBs:   0
<5>[1685451.942881] UBI: max. allowed volumes:       128
<5>[1685451.947692] UBI: wear-leveling threshold:    4096
<5>[1685451.952581] UBI: number of internal volumes: 1
<5>[1685451.957219] UBI: number of user volumes:     1
<5>[1685451.961853] UBI: available PEBs:             0
<5>[1685451.966497] UBI: total number of reserved PEBs: 120
<5>[1685451.971598] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1685451.977815] UBI: max/mean erase counter: 7/6
<5>[1685451.982271] UBI: image sequence number:  1872325126
<5>[1685451.987352] UBI: background thread "ubi_bgt2d" started, PID 7569
<5>[1685452.105165] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1685452.111395] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1685452.119175] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1685452.126687] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1685452.132755] UBIFS: default compressor: lzo
<5>[1685452.137051] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1685452.341014] UBIFS: un-mount UBI device 2, volume 0
<5>[1685452.392587] UBI: mtd6 is detached from ubi2
<5>[1707051.832761] UBI: attaching mtd6 to ubi2
<5>[1707051.836841] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1707051.843300] UBI: logical eraseblock size:    126976 bytes
<5>[1707051.848923] UBI: smallest flash I/O unit:    2048
<5>[1707051.853815] UBI: VID header offset:          2048 (aligned 2048)
<5>[1707051.860027] UBI: data offset:                4096
<5>[1707051.968271] UBI: max. sequence number:       629
<5>[1707051.983772] UBI: attached mtd6 to ubi2
<5>[1707051.987746] UBI: MTD device name:            "config"
<5>[1707051.992987] UBI: MTD device size:            15 MiB
<5>[1707051.998079] UBI: number of good PEBs:        120
<5>[1707052.002883] UBI: number of bad PEBs:         0
<5>[1707052.007526] UBI: number of corrupted PEBs:   0
<5>[1707052.012155] UBI: max. allowed volumes:       128
<5>[1707052.016968] UBI: wear-leveling threshold:    4096
<5>[1707052.021858] UBI: number of internal volumes: 1
<5>[1707052.026507] UBI: number of user volumes:     1
<5>[1707052.031137] UBI: available PEBs:             0
<5>[1707052.035764] UBI: total number of reserved PEBs: 120
<5>[1707052.040838] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1707052.047045] UBI: max/mean erase counter: 7/6
<5>[1707052.051499] UBI: image sequence number:  1872325126
<5>[1707052.056770] UBI: background thread "ubi_bgt2d" started, PID 10293
<5>[1707052.175308] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1707052.181546] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1707052.189328] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1707052.196842] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1707052.202865] UBIFS: default compressor: lzo
<5>[1707052.207174] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1707052.414597] UBIFS: un-mount UBI device 2, volume 0
<5>[1707052.516135] UBI: mtd6 is detached from ubi2
<5>[1728651.901240] UBI: attaching mtd6 to ubi2
<5>[1728651.905266] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1728651.911791] UBI: logical eraseblock size:    126976 bytes
<5>[1728651.917406] UBI: smallest flash I/O unit:    2048
<5>[1728651.922298] UBI: VID header offset:          2048 (aligned 2048)
<5>[1728651.928515] UBI: data offset:                4096
<5>[1728652.036889] UBI: max. sequence number:       633
<5>[1728652.052371] UBI: attached mtd6 to ubi2
<5>[1728652.056346] UBI: MTD device name:            "config"
<5>[1728652.061595] UBI: MTD device size:            15 MiB
<5>[1728652.066685] UBI: number of good PEBs:        120
<5>[1728652.071494] UBI: number of bad PEBs:         0
<5>[1728652.076135] UBI: number of corrupted PEBs:   0
<5>[1728652.080764] UBI: max. allowed volumes:       128
<5>[1728652.085565] UBI: wear-leveling threshold:    4096
<5>[1728652.090480] UBI: number of internal volumes: 1
<5>[1728652.095110] UBI: number of user volumes:     1
<5>[1728652.099747] UBI: available PEBs:             0
<5>[1728652.104382] UBI: total number of reserved PEBs: 120
<5>[1728652.109455] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1728652.115651] UBI: max/mean erase counter: 7/6
<5>[1728652.120111] UBI: image sequence number:  1872325126
<5>[1728652.125191] UBI: background thread "ubi_bgt2d" started, PID 13073
<5>[1728652.247203] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1728652.253405] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1728652.261191] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1728652.268704] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1728652.274726] UBIFS: default compressor: lzo
<5>[1728652.279014] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1728652.490264] UBIFS: un-mount UBI device 2, volume 0
<5>[1728652.546737] UBI: mtd6 is detached from ubi2
<5>[1750251.977674] UBI: attaching mtd6 to ubi2
<5>[1750251.981701] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1750251.988187] UBI: logical eraseblock size:    126976 bytes
<5>[1750251.993776] UBI: smallest flash I/O unit:    2048
<5>[1750251.998693] UBI: VID header offset:          2048 (aligned 2048)
<5>[1750252.004889] UBI: data offset:                4096
<5>[1750252.113141] UBI: max. sequence number:       634
<5>[1750252.128634] UBI: attached mtd6 to ubi2
<5>[1750252.132575] UBI: MTD device name:            "config"
<5>[1750252.137844] UBI: MTD device size:            15 MiB
<5>[1750252.142910] UBI: number of good PEBs:        120
<5>[1750252.147721] UBI: number of bad PEBs:         0
<5>[1750252.152350] UBI: number of corrupted PEBs:   0
<5>[1750252.157000] UBI: max. allowed volumes:       128
<5>[1750252.161803] UBI: wear-leveling threshold:    4096
<5>[1750252.166700] UBI: number of internal volumes: 1
<5>[1750252.171328] UBI: number of user volumes:     1
<5>[1750252.175963] UBI: available PEBs:             0
<5>[1750252.180591] UBI: total number of reserved PEBs: 120
<5>[1750252.185654] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1750252.191857] UBI: max/mean erase counter: 7/6
<5>[1750252.196322] UBI: image sequence number:  1872325126
<5>[1750252.201531] UBI: background thread "ubi_bgt2d" started, PID 15636
<5>[1750252.323857] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1750252.330081] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1750252.337861] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1750252.345365] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1750252.351397] UBIFS: default compressor: lzo
<5>[1750252.355679] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1750252.558859] UBIFS: un-mount UBI device 2, volume 0
<5>[1750252.625913] UBI: mtd6 is detached from ubi2
<5>[1771852.052223] UBI: attaching mtd6 to ubi2
<5>[1771852.056286] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1771852.062750] UBI: logical eraseblock size:    126976 bytes
<5>[1771852.068351] UBI: smallest flash I/O unit:    2048
<5>[1771852.073244] UBI: VID header offset:          2048 (aligned 2048)
<5>[1771852.079448] UBI: data offset:                4096
<5>[1771852.187262] UBI: max. sequence number:       635
<5>[1771852.202693] UBI: attached mtd6 to ubi2
<5>[1771852.206658] UBI: MTD device name:            "config"
<5>[1771852.211899] UBI: MTD device size:            15 MiB
<5>[1771852.216969] UBI: number of good PEBs:        120
<5>[1771852.221771] UBI: number of bad PEBs:         0
<5>[1771852.226404] UBI: number of corrupted PEBs:   0
<5>[1771852.231032] UBI: max. allowed volumes:       128
<5>[1771852.235833] UBI: wear-leveling threshold:    4096
<5>[1771852.240726] UBI: number of internal volumes: 1
<5>[1771852.245360] UBI: number of user volumes:     1
<5>[1771852.250003] UBI: available PEBs:             0
<5>[1771852.254631] UBI: total number of reserved PEBs: 120
<5>[1771852.259700] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1771852.265896] UBI: max/mean erase counter: 7/6
<5>[1771852.270373] UBI: image sequence number:  1872325126
<5>[1771852.275451] UBI: background thread "ubi_bgt2d" started, PID 17997
<5>[1771852.397443] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1771852.403646] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1771852.411434] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1771852.418945] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1771852.424967] UBIFS: default compressor: lzo
<5>[1771852.429252] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1771852.633306] UBIFS: un-mount UBI device 2, volume 0
<5>[1771852.696414] UBI: mtd6 is detached from ubi2
<5>[1793452.130396] UBI: attaching mtd6 to ubi2
<5>[1793452.134422] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1793452.140934] UBI: logical eraseblock size:    126976 bytes
<5>[1793452.146557] UBI: smallest flash I/O unit:    2048
<5>[1793452.151449] UBI: VID header offset:          2048 (aligned 2048)
<5>[1793452.157659] UBI: data offset:                4096
<5>[1793452.265525] UBI: max. sequence number:       636
<5>[1793452.280995] UBI: attached mtd6 to ubi2
<5>[1793452.284948] UBI: MTD device name:            "config"
<5>[1793452.290222] UBI: MTD device size:            15 MiB
<5>[1793452.295287] UBI: number of good PEBs:        120
<5>[1793452.300102] UBI: number of bad PEBs:         0
<5>[1793452.304731] UBI: number of corrupted PEBs:   0
<5>[1793452.309370] UBI: max. allowed volumes:       128
<5>[1793452.314179] UBI: wear-leveling threshold:    4096
<5>[1793452.319082] UBI: number of internal volumes: 1
<5>[1793452.323712] UBI: number of user volumes:     1
<5>[1793452.328351] UBI: available PEBs:             0
<5>[1793452.332984] UBI: total number of reserved PEBs: 120
<5>[1793452.338058] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1793452.344255] UBI: max/mean erase counter: 7/6
<5>[1793452.348716] UBI: image sequence number:  1872325126
<5>[1793452.353794] UBI: background thread "ubi_bgt2d" started, PID 20830
<5>[1793452.471137] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1793452.477367] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1793452.485135] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1793452.492657] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1793452.498697] UBIFS: default compressor: lzo
<5>[1793452.502978] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1793452.710158] UBIFS: un-mount UBI device 2, volume 0
<5>[1793452.788108] UBI: mtd6 is detached from ubi2
<5>[1815052.212040] UBI: attaching mtd6 to ubi2
<5>[1815052.216115] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1815052.222632] UBI: logical eraseblock size:    126976 bytes
<5>[1815052.228238] UBI: smallest flash I/O unit:    2048
<5>[1815052.233130] UBI: VID header offset:          2048 (aligned 2048)
<5>[1815052.239335] UBI: data offset:                4096
<5>[1815052.347621] UBI: max. sequence number:       637
<5>[1815052.363082] UBI: attached mtd6 to ubi2
<5>[1815052.367049] UBI: MTD device name:            "config"
<5>[1815052.372290] UBI: MTD device size:            15 MiB
<5>[1815052.377379] UBI: number of good PEBs:        120
<5>[1815052.382202] UBI: number of bad PEBs:         0
<5>[1815052.386858] UBI: number of corrupted PEBs:   0
<5>[1815052.391489] UBI: max. allowed volumes:       128
<5>[1815052.396304] UBI: wear-leveling threshold:    4096
<5>[1815052.401194] UBI: number of internal volumes: 1
<5>[1815052.405821] UBI: number of user volumes:     1
<5>[1815052.410456] UBI: available PEBs:             0
<5>[1815052.415086] UBI: total number of reserved PEBs: 120
<5>[1815052.420157] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1815052.426361] UBI: max/mean erase counter: 7/6
<5>[1815052.430815] UBI: image sequence number:  1872325126
<5>[1815052.435895] UBI: background thread "ubi_bgt2d" started, PID 23558
<5>[1815052.552898] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1815052.559123] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1815052.566897] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1815052.574401] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1815052.580430] UBIFS: default compressor: lzo
<5>[1815052.584712] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1815052.792970] UBIFS: un-mount UBI device 2, volume 0
<5>[1815052.856435] UBI: mtd6 is detached from ubi2
<5>[1836654.113078] UBI: attaching mtd6 to ubi2
<5>[1836654.117136] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1836654.123595] UBI: logical eraseblock size:    126976 bytes
<5>[1836654.129194] UBI: smallest flash I/O unit:    2048
<5>[1836654.134097] UBI: VID header offset:          2048 (aligned 2048)
<5>[1836654.140298] UBI: data offset:                4096
<5>[1836654.248160] UBI: max. sequence number:       638
<5>[1836654.263611] UBI: attached mtd6 to ubi2
<5>[1836654.267586] UBI: MTD device name:            "config"
<5>[1836654.272827] UBI: MTD device size:            15 MiB
<5>[1836654.277902] UBI: number of good PEBs:        120
<5>[1836654.282705] UBI: number of bad PEBs:         0
<5>[1836654.287340] UBI: number of corrupted PEBs:   0
<5>[1836654.291969] UBI: max. allowed volumes:       128
<5>[1836654.296780] UBI: wear-leveling threshold:    4096
<5>[1836654.301686] UBI: number of internal volumes: 1
<5>[1836654.306349] UBI: number of user volumes:     1
<5>[1836654.310989] UBI: available PEBs:             0
<5>[1836654.315643] UBI: total number of reserved PEBs: 120
<5>[1836654.320708] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1836654.326910] UBI: max/mean erase counter: 7/6
<5>[1836654.331363] UBI: image sequence number:  1872325126
<5>[1836654.336450] UBI: background thread "ubi_bgt2d" started, PID 25938
<5>[1836654.459049] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1836654.465292] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1836654.473066] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1836654.480609] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1836654.486648] UBIFS: default compressor: lzo
<5>[1836654.490930] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1836654.695768] UBIFS: un-mount UBI device 2, volume 0
<5>[1836654.774190] UBI: mtd6 is detached from ubi2
<5>[1858254.190830] UBI: attaching mtd6 to ubi2
<5>[1858254.194915] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1858254.201375] UBI: logical eraseblock size:    126976 bytes
<5>[1858254.206982] UBI: smallest flash I/O unit:    2048
<5>[1858254.211960] UBI: VID header offset:          2048 (aligned 2048)
<5>[1858254.218178] UBI: data offset:                4096
<5>[1858254.326272] UBI: max. sequence number:       639
<5>[1858254.341825] UBI: attached mtd6 to ubi2
<5>[1858254.345819] UBI: MTD device name:            "config"
<5>[1858254.351068] UBI: MTD device size:            15 MiB
<5>[1858254.356159] UBI: number of good PEBs:        120
<5>[1858254.360963] UBI: number of bad PEBs:         0
<5>[1858254.365601] UBI: number of corrupted PEBs:   0
<5>[1858254.370231] UBI: max. allowed volumes:       128
<5>[1858254.375041] UBI: wear-leveling threshold:    4096
<5>[1858254.379930] UBI: number of internal volumes: 1
<5>[1858254.384568] UBI: number of user volumes:     1
<5>[1858254.389196] UBI: available PEBs:             0
<5>[1858254.393832] UBI: total number of reserved PEBs: 120
<5>[1858254.398896] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1858254.405105] UBI: max/mean erase counter: 7/6
<5>[1858254.409560] UBI: image sequence number:  1872325126
<5>[1858254.414663] UBI: background thread "ubi_bgt2d" started, PID 28378
<5>[1858254.532569] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1858254.538797] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1858254.546575] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1858254.554089] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1858254.560112] UBIFS: default compressor: lzo
<5>[1858254.564408] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1858254.767588] UBIFS: un-mount UBI device 2, volume 0
<5>[1858254.843719] UBI: mtd6 is detached from ubi2
<5>[1879854.300586] UBI: attaching mtd6 to ubi2
<5>[1879854.304645] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1879854.311106] UBI: logical eraseblock size:    126976 bytes
<5>[1879854.316722] UBI: smallest flash I/O unit:    2048
<5>[1879854.321615] UBI: VID header offset:          2048 (aligned 2048)
<5>[1879854.327842] UBI: data offset:                4096
<5>[1879854.435736] UBI: max. sequence number:       640
<5>[1879854.451209] UBI: attached mtd6 to ubi2
<5>[1879854.455175] UBI: MTD device name:            "config"
<5>[1879854.460416] UBI: MTD device size:            15 MiB
<5>[1879854.465610] UBI: number of good PEBs:        120
<5>[1879854.470475] UBI: number of bad PEBs:         0
<5>[1879854.475126] UBI: number of corrupted PEBs:   0
<5>[1879854.479757] UBI: max. allowed volumes:       128
<5>[1879854.484570] UBI: wear-leveling threshold:    4096
<5>[1879854.489460] UBI: number of internal volumes: 1
<5>[1879854.494097] UBI: number of user volumes:     1
<5>[1879854.498727] UBI: available PEBs:             0
<5>[1879854.503359] UBI: total number of reserved PEBs: 120
<5>[1879854.508431] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1879854.514634] UBI: max/mean erase counter: 7/6
<5>[1879854.519088] UBI: image sequence number:  1872325126
<5>[1879854.524188] UBI: background thread "ubi_bgt2d" started, PID 30915
<5>[1879854.642926] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1879854.649153] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1879854.656933] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1879854.664453] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1879854.670476] UBIFS: default compressor: lzo
<5>[1879854.674765] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1879854.885038] UBIFS: un-mount UBI device 2, volume 0
<5>[1879854.932418] UBI: mtd6 is detached from ubi2
<5>[1901454.356480] UBI: attaching mtd6 to ubi2
<5>[1901454.360520] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1901454.367043] UBI: logical eraseblock size:    126976 bytes
<5>[1901454.372631] UBI: smallest flash I/O unit:    2048
<5>[1901454.377555] UBI: VID header offset:          2048 (aligned 2048)
<5>[1901454.383778] UBI: data offset:                4096
<5>[1901454.491704] UBI: max. sequence number:       641
<5>[1901454.507183] UBI: attached mtd6 to ubi2
<5>[1901454.511124] UBI: MTD device name:            "config"
<5>[1901454.516383] UBI: MTD device size:            15 MiB
<5>[1901454.521447] UBI: number of good PEBs:        120
<5>[1901454.526258] UBI: number of bad PEBs:         0
<5>[1901454.530887] UBI: number of corrupted PEBs:   0
<5>[1901454.535522] UBI: max. allowed volumes:       128
<5>[1901454.540326] UBI: wear-leveling threshold:    4096
<5>[1901454.545222] UBI: number of internal volumes: 1
<5>[1901454.549851] UBI: number of user volumes:     1
<5>[1901454.554487] UBI: available PEBs:             0
<5>[1901454.559116] UBI: total number of reserved PEBs: 120
<5>[1901454.564188] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1901454.570384] UBI: max/mean erase counter: 7/6
<5>[1901454.574845] UBI: image sequence number:  1872325126
<5>[1901454.579924] UBI: background thread "ubi_bgt2d" started, PID 1179
<5>[1901454.697160] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1901454.703364] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1901454.711148] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1901454.718691] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1901454.724738] UBIFS: default compressor: lzo
<5>[1901454.729026] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1901454.932051] UBIFS: un-mount UBI device 2, volume 0
<5>[1901455.004421] UBI: mtd6 is detached from ubi2
<5>[1923054.443939] UBI: attaching mtd6 to ubi2
<5>[1923054.447966] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1923054.454467] UBI: logical eraseblock size:    126976 bytes
<5>[1923054.460055] UBI: smallest flash I/O unit:    2048
<5>[1923054.464979] UBI: VID header offset:          2048 (aligned 2048)
<5>[1923054.471176] UBI: data offset:                4096
<5>[1923054.579039] UBI: max. sequence number:       642
<5>[1923054.594515] UBI: attached mtd6 to ubi2
<5>[1923054.598457] UBI: MTD device name:            "config"
<5>[1923054.603731] UBI: MTD device size:            15 MiB
<5>[1923054.608796] UBI: number of good PEBs:        120
<5>[1923054.613605] UBI: number of bad PEBs:         0
<5>[1923054.618248] UBI: number of corrupted PEBs:   0
<5>[1923054.622877] UBI: max. allowed volumes:       128
<5>[1923054.627706] UBI: wear-leveling threshold:    4096
<5>[1923054.632597] UBI: number of internal volumes: 1
<5>[1923054.637237] UBI: number of user volumes:     1
<5>[1923054.641866] UBI: available PEBs:             0
<5>[1923054.646509] UBI: total number of reserved PEBs: 120
<5>[1923054.651574] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1923054.657782] UBI: max/mean erase counter: 7/6
<5>[1923054.662239] UBI: image sequence number:  1872325126
<5>[1923054.667375] UBI: background thread "ubi_bgt2d" started, PID 4400
<5>[1923054.786084] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1923054.792287] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1923054.800087] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1923054.807624] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1923054.813668] UBIFS: default compressor: lzo
<5>[1923054.817951] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1923055.022116] UBIFS: un-mount UBI device 2, volume 0
<5>[1923055.093788] UBI: mtd6 is detached from ubi2
<5>[1944658.748061] UBI: attaching mtd6 to ubi2
<5>[1944658.752089] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1944658.758593] UBI: logical eraseblock size:    126976 bytes
<5>[1944658.764204] UBI: smallest flash I/O unit:    2048
<5>[1944658.769095] UBI: VID header offset:          2048 (aligned 2048)
<5>[1944658.775297] UBI: data offset:                4096
<5>[1944658.883232] UBI: max. sequence number:       643
<5>[1944658.898750] UBI: attached mtd6 to ubi2
<5>[1944658.902698] UBI: MTD device name:            "config"
<5>[1944658.907960] UBI: MTD device size:            15 MiB
<5>[1944658.913024] UBI: number of good PEBs:        120
<5>[1944658.917833] UBI: number of bad PEBs:         0
<5>[1944658.922461] UBI: number of corrupted PEBs:   0
<5>[1944658.927094] UBI: max. allowed volumes:       128
<5>[1944658.931897] UBI: wear-leveling threshold:    4096
<5>[1944658.936789] UBI: number of internal volumes: 1
<5>[1944658.941417] UBI: number of user volumes:     1
<5>[1944658.946049] UBI: available PEBs:             0
<5>[1944658.950723] UBI: total number of reserved PEBs: 120
<5>[1944658.955799] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1944658.961996] UBI: max/mean erase counter: 7/6
<5>[1944658.966454] UBI: image sequence number:  1872325126
<5>[1944658.971533] UBI: background thread "ubi_bgt2d" started, PID 6816
<5>[1944659.093162] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1944659.099388] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1944659.107162] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1944659.114671] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1944659.120692] UBIFS: default compressor: lzo
<5>[1944659.124978] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1944659.329051] UBIFS: un-mount UBI device 2, volume 0
<5>[1944659.394463] UBI: mtd6 is detached from ubi2
<5>[1966254.608109] UBI: attaching mtd6 to ubi2
<5>[1966254.612135] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1966254.618619] UBI: logical eraseblock size:    126976 bytes
<5>[1966254.624233] UBI: smallest flash I/O unit:    2048
<5>[1966254.629124] UBI: VID header offset:          2048 (aligned 2048)
<5>[1966254.635351] UBI: data offset:                4096
<5>[1966254.743475] UBI: max. sequence number:       644
<5>[1966254.758960] UBI: attached mtd6 to ubi2
<5>[1966254.762906] UBI: MTD device name:            "config"
<5>[1966254.768188] UBI: MTD device size:            15 MiB
<5>[1966254.773255] UBI: number of good PEBs:        120
<5>[1966254.778068] UBI: number of bad PEBs:         0
<5>[1966254.782697] UBI: number of corrupted PEBs:   0
<5>[1966254.787332] UBI: max. allowed volumes:       128
<5>[1966254.792134] UBI: wear-leveling threshold:    4096
<5>[1966254.797030] UBI: number of internal volumes: 1
<5>[1966254.801659] UBI: number of user volumes:     1
<5>[1966254.806292] UBI: available PEBs:             0
<5>[1966254.810922] UBI: total number of reserved PEBs: 120
<5>[1966254.815997] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1966254.822194] UBI: max/mean erase counter: 7/6
<5>[1966254.826656] UBI: image sequence number:  1872325126
<5>[1966254.831732] UBI: background thread "ubi_bgt2d" started, PID 9658
<5>[1966254.948606] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1966254.954828] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1966254.962594] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1966254.970106] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1966254.976138] UBIFS: default compressor: lzo
<5>[1966254.980420] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1966255.187140] UBIFS: un-mount UBI device 2, volume 0
<5>[1966255.236205] UBI: mtd6 is detached from ubi2
<5>[1987854.688521] UBI: attaching mtd6 to ubi2
<5>[1987854.692547] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[1987854.699051] UBI: logical eraseblock size:    126976 bytes
<5>[1987854.704661] UBI: smallest flash I/O unit:    2048
<5>[1987854.709552] UBI: VID header offset:          2048 (aligned 2048)
<5>[1987854.715767] UBI: data offset:                4096
<5>[1987854.825999] UBI: max. sequence number:       645
<5>[1987854.841520] UBI: attached mtd6 to ubi2
<5>[1987854.845526] UBI: MTD device name:            "config"
<5>[1987854.850768] UBI: MTD device size:            15 MiB
<5>[1987854.855845] UBI: number of good PEBs:        120
<5>[1987854.860647] UBI: number of bad PEBs:         0
<5>[1987854.865283] UBI: number of corrupted PEBs:   0
<5>[1987854.869912] UBI: max. allowed volumes:       128
<5>[1987854.874720] UBI: wear-leveling threshold:    4096
<5>[1987854.879609] UBI: number of internal volumes: 1
<5>[1987854.884249] UBI: number of user volumes:     1
<5>[1987854.888878] UBI: available PEBs:             0
<5>[1987854.893506] UBI: total number of reserved PEBs: 120
<5>[1987854.898578] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[1987854.904785] UBI: max/mean erase counter: 7/6
<5>[1987854.909251] UBI: image sequence number:  1872325126
<5>[1987854.914356] UBI: background thread "ubi_bgt2d" started, PID 12061
<5>[1987855.032647] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[1987855.038897] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[1987855.046685] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[1987855.054219] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[1987855.060243] UBIFS: default compressor: lzo
<5>[1987855.064533] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[1987855.268129] UBIFS: un-mount UBI device 2, volume 0
<5>[1987855.320096] UBI: mtd6 is detached from ubi2
<5>[2009454.769996] UBI: attaching mtd6 to ubi2
<5>[2009454.774067] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2009454.780526] UBI: logical eraseblock size:    126976 bytes
<5>[2009454.786146] UBI: smallest flash I/O unit:    2048
<5>[2009454.791038] UBI: VID header offset:          2048 (aligned 2048)
<5>[2009454.797244] UBI: data offset:                4096
<5>[2009454.905092] UBI: max. sequence number:       646
<5>[2009454.920599] UBI: attached mtd6 to ubi2
<5>[2009454.924575] UBI: MTD device name:            "config"
<5>[2009454.929815] UBI: MTD device size:            15 MiB
<5>[2009454.934893] UBI: number of good PEBs:        120
<5>[2009454.939704] UBI: number of bad PEBs:         0
<5>[2009454.944354] UBI: number of corrupted PEBs:   0
<5>[2009454.948990] UBI: max. allowed volumes:       128
<5>[2009454.953821] UBI: wear-leveling threshold:    4096
<5>[2009454.958729] UBI: number of internal volumes: 1
<5>[2009454.963367] UBI: number of user volumes:     1
<5>[2009454.968018] UBI: available PEBs:             0
<5>[2009454.972649] UBI: total number of reserved PEBs: 120
<5>[2009454.977721] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2009454.983925] UBI: max/mean erase counter: 7/6
<5>[2009454.988380] UBI: image sequence number:  1872325126
<5>[2009454.993456] UBI: background thread "ubi_bgt2d" started, PID 14503
<5>[2009455.115965] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2009455.122174] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2009455.129961] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2009455.137477] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2009455.143504] UBIFS: default compressor: lzo
<5>[2009455.147806] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2009455.356455] UBIFS: un-mount UBI device 2, volume 0
<5>[2009455.423833] UBI: mtd6 is detached from ubi2
<5>[2031054.845974] UBI: attaching mtd6 to ubi2
<5>[2031054.850000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2031054.856494] UBI: logical eraseblock size:    126976 bytes
<5>[2031054.862086] UBI: smallest flash I/O unit:    2048
<5>[2031054.866990] UBI: VID header offset:          2048 (aligned 2048)
<5>[2031054.873197] UBI: data offset:                4096
<5>[2031054.981478] UBI: max. sequence number:       647
<5>[2031054.996951] UBI: attached mtd6 to ubi2
<5>[2031055.000975] UBI: MTD device name:            "config"
<5>[2031055.006322] UBI: MTD device size:            15 MiB
<5>[2031055.011390] UBI: number of good PEBs:        120
<5>[2031055.016207] UBI: number of bad PEBs:         0
<5>[2031055.020844] UBI: number of corrupted PEBs:   0
<5>[2031055.025481] UBI: max. allowed volumes:       128
<5>[2031055.030283] UBI: wear-leveling threshold:    4096
<5>[2031055.035188] UBI: number of internal volumes: 1
<5>[2031055.039819] UBI: number of user volumes:     1
<5>[2031055.044456] UBI: available PEBs:             0
<5>[2031055.049090] UBI: total number of reserved PEBs: 120
<5>[2031055.054176] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2031055.060371] UBI: max/mean erase counter: 7/6
<5>[2031055.064830] UBI: image sequence number:  1872325126
<5>[2031055.069908] UBI: background thread "ubi_bgt2d" started, PID 17008
<5>[2031055.192129] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2031055.198370] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2031055.206162] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2031055.213686] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2031055.219724] UBIFS: default compressor: lzo
<5>[2031055.224030] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2031055.430029] UBIFS: un-mount UBI device 2, volume 0
<5>[2031055.514271] UBI: mtd6 is detached from ubi2
<5>[2052654.923206] UBI: attaching mtd6 to ubi2
<5>[2052654.927281] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2052654.933772] UBI: logical eraseblock size:    126976 bytes
<5>[2052654.939360] UBI: smallest flash I/O unit:    2048
<5>[2052654.944260] UBI: VID header offset:          2048 (aligned 2048)
<5>[2052654.950458] UBI: data offset:                4096
<5>[2052655.058403] UBI: max. sequence number:       648
<5>[2052655.073863] UBI: attached mtd6 to ubi2
<5>[2052655.077804] UBI: MTD device name:            "config"
<5>[2052655.083044] UBI: MTD device size:            15 MiB
<5>[2052655.088131] UBI: number of good PEBs:        120
<5>[2052655.092935] UBI: number of bad PEBs:         0
<5>[2052655.097572] UBI: number of corrupted PEBs:   0
<5>[2052655.102201] UBI: max. allowed volumes:       128
<5>[2052655.107012] UBI: wear-leveling threshold:    4096
<5>[2052655.111902] UBI: number of internal volumes: 1
<5>[2052655.116541] UBI: number of user volumes:     1
<5>[2052655.121170] UBI: available PEBs:             0
<5>[2052655.125807] UBI: total number of reserved PEBs: 120
<5>[2052655.130872] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2052655.137080] UBI: max/mean erase counter: 7/6
<5>[2052655.141534] UBI: image sequence number:  1872325126
<5>[2052655.146742] UBI: background thread "ubi_bgt2d" started, PID 19945
<5>[2052655.265889] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2052655.272096] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2052655.279890] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2052655.287404] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2052655.293426] UBIFS: default compressor: lzo
<5>[2052655.297714] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2052655.501384] UBIFS: un-mount UBI device 2, volume 0
<5>[2052655.584159] UBI: mtd6 is detached from ubi2
<5>[2074255.093472] UBI: attaching mtd6 to ubi2
<5>[2074255.097565] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2074255.104070] UBI: logical eraseblock size:    126976 bytes
<5>[2074255.109657] UBI: smallest flash I/O unit:    2048
<5>[2074255.114568] UBI: VID header offset:          2048 (aligned 2048)
<5>[2074255.120766] UBI: data offset:                4096
<5>[2074255.228818] UBI: max. sequence number:       649
<5>[2074255.244300] UBI: attached mtd6 to ubi2
<5>[2074255.248242] UBI: MTD device name:            "config"
<5>[2074255.253482] UBI: MTD device size:            15 MiB
<5>[2074255.258750] UBI: number of good PEBs:        120
<5>[2074255.263663] UBI: number of bad PEBs:         0
<5>[2074255.268359] UBI: number of corrupted PEBs:   0
<5>[2074255.272988] UBI: max. allowed volumes:       128
<5>[2074255.277906] UBI: wear-leveling threshold:    4096
<5>[2074255.282806] UBI: number of internal volumes: 1
<5>[2074255.287452] UBI: number of user volumes:     1
<5>[2074255.292081] UBI: available PEBs:             0
<5>[2074255.296839] UBI: total number of reserved PEBs: 120
<5>[2074255.301989] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2074255.308216] UBI: max/mean erase counter: 7/6
<5>[2074255.312678] UBI: image sequence number:  1872325126
<5>[2074255.317789] UBI: background thread "ubi_bgt2d" started, PID 22959
<5>[2074255.436437] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2074255.442651] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2074255.450507] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2074255.458047] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2074255.464091] UBIFS: default compressor: lzo
<5>[2074255.468374] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2074255.676787] UBIFS: un-mount UBI device 2, volume 0
<5>[2074255.743845] UBI: mtd6 is detached from ubi2
<5>[2095855.086630] UBI: attaching mtd6 to ubi2
<5>[2095855.090657] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2095855.097147] UBI: logical eraseblock size:    126976 bytes
<5>[2095855.102737] UBI: smallest flash I/O unit:    2048
<5>[2095855.107638] UBI: VID header offset:          2048 (aligned 2048)
<5>[2095855.113846] UBI: data offset:                4096
<5>[2095855.221883] UBI: max. sequence number:       650
<5>[2095855.237352] UBI: attached mtd6 to ubi2
<5>[2095855.241294] UBI: MTD device name:            "config"
<5>[2095855.246561] UBI: MTD device size:            15 MiB
<5>[2095855.251627] UBI: number of good PEBs:        120
<5>[2095855.256438] UBI: number of bad PEBs:         0
<5>[2095855.261156] UBI: number of corrupted PEBs:   0
<5>[2095855.265839] UBI: max. allowed volumes:       128
<5>[2095855.270644] UBI: wear-leveling threshold:    4096
<5>[2095855.275549] UBI: number of internal volumes: 1
<5>[2095855.280184] UBI: number of user volumes:     1
<5>[2095855.284827] UBI: available PEBs:             0
<5>[2095855.289456] UBI: total number of reserved PEBs: 120
<5>[2095855.294528] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2095855.300725] UBI: max/mean erase counter: 7/6
<5>[2095855.305186] UBI: image sequence number:  1872325126
<5>[2095855.310333] UBI: background thread "ubi_bgt2d" started, PID 25587
<5>[2095855.427210] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2095855.433414] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2095855.441202] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2095855.448719] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2095855.454750] UBIFS: default compressor: lzo
<5>[2095855.459031] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2095855.673066] UBIFS: un-mount UBI device 2, volume 0
<5>[2095855.724096] UBI: mtd6 is detached from ubi2
<5>[2117455.165492] UBI: attaching mtd6 to ubi2
<5>[2117455.169520] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2117455.176004] UBI: logical eraseblock size:    126976 bytes
<5>[2117455.181599] UBI: smallest flash I/O unit:    2048
<5>[2117455.186511] UBI: VID header offset:          2048 (aligned 2048)
<5>[2117455.192707] UBI: data offset:                4096
<5>[2117455.300835] UBI: max. sequence number:       651
<5>[2117455.316352] UBI: attached mtd6 to ubi2
<5>[2117455.320323] UBI: MTD device name:            "config"
<5>[2117455.325608] UBI: MTD device size:            15 MiB
<5>[2117455.330687] UBI: number of good PEBs:        120
<5>[2117455.335514] UBI: number of bad PEBs:         0
<5>[2117455.340142] UBI: number of corrupted PEBs:   0
<5>[2117455.344777] UBI: max. allowed volumes:       128
<5>[2117455.349584] UBI: wear-leveling threshold:    4096
<5>[2117455.354488] UBI: number of internal volumes: 1
<5>[2117455.359116] UBI: number of user volumes:     1
<5>[2117455.363749] UBI: available PEBs:             0
<5>[2117455.368377] UBI: total number of reserved PEBs: 120
<5>[2117455.373441] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2117455.379642] UBI: max/mean erase counter: 7/6
<5>[2117455.384100] UBI: image sequence number:  1872325126
<5>[2117455.389180] UBI: background thread "ubi_bgt2d" started, PID 28777
<5>[2117455.510743] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2117455.516969] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2117455.524742] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2117455.532246] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2117455.538273] UBIFS: default compressor: lzo
<5>[2117455.542553] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2117455.747889] UBIFS: un-mount UBI device 2, volume 0
<5>[2117455.814356] UBI: mtd6 is detached from ubi2
<4>[2122439.905484] nfsd: last server has exited, flushing export cache
<6>[2122489.189255] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[2122489.320199] eth0: pfe_eth_close
<6>[2122489.353654] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[2122489.363259] hif_process_client_req: unregister client_id 1
<6>[2122489.368943] pfe_hif_client_unregister
<6>[2122489.435023] eth1: pfe_eth_close
<6>[2122489.473645] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[2122489.483337] hif_process_client_req: unregister client_id 0
<6>[2122489.489069] pfe_hif_client_unregister
<5>[2122505.648970] UBI: attaching mtd6 to ubi2
<5>[2122505.652996] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[2122505.659482] UBI: logical eraseblock size:    126976 bytes
<5>[2122505.665082] UBI: smallest flash I/O unit:    2048
<5>[2122505.669972] UBI: VID header offset:          2048 (aligned 2048)
<5>[2122505.676177] UBI: data offset:                4096
<5>[2122505.783970] UBI: max. sequence number:       652
<5>[2122505.799392] UBI: attached mtd6 to ubi2
<5>[2122505.803332] UBI: MTD device name:            "config"
<5>[2122505.808600] UBI: MTD device size:            15 MiB
<5>[2122505.813679] UBI: number of good PEBs:        120
<5>[2122505.818481] UBI: number of bad PEBs:         0
<5>[2122505.823109] UBI: number of corrupted PEBs:   0
<5>[2122505.827745] UBI: max. allowed volumes:       128
<5>[2122505.832549] UBI: wear-leveling threshold:    4096
<5>[2122505.837447] UBI: number of internal volumes: 1
<5>[2122505.842075] UBI: number of user volumes:     1
<5>[2122505.846713] UBI: available PEBs:             0
<5>[2122505.851341] UBI: total number of reserved PEBs: 120
<5>[2122505.856412] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[2122505.862608] UBI: max/mean erase counter: 7/6
<5>[2122505.867070] UBI: image sequence number:  1872325126
<5>[2122505.872145] UBI: background thread "ubi_bgt2d" started, PID 2157
<5>[2122505.989347] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[2122505.995577] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[2122506.003344] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[2122506.010859] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[2122506.016889] UBIFS: default compressor: lzo
<5>[2122506.021169] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[2122506.620285] UBIFS: un-mount UBI device 2, volume 0
<5>[2122506.679720] UBI: mtd6 is detached from ubi2
[Diagnostic] Tue Apr 28 08:22:04 CEST 2020, 493.07
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000184] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060212] Mount-cache hash table entries: 512
<6>[    0.060708] Initializing cgroup subsys cpuacct
<6>[    0.060737] Initializing cgroup subsys devices
<6>[    0.060772] CPU: Testing write buffer coherency: ok
<6>[    0.060932] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060956] Calibrating local timer... 299.86MHz.
<4>[    0.120063]  Creating cpu1_hotplug_thread....
<4>[    0.120151]  cpu1_hotplug_thread Created
<6>[    0.120168] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121573] CPU1: Booted secondary processor
<6>[    0.180038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180093] Brought up 2 CPUs
<6>[    0.180106] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180823] devtmpfs: initialized
<6>[    0.182223] xor: measuring software checksum speed
<6>[    0.229986]    arm4regs  :  2128.800 MB/sec
<6>[    0.279962]    8regs     :  1438.000 MB/sec
<6>[    0.329937]    32regs    :  1409.600 MB/sec
<6>[    0.329944] xor: using function: arm4regs (2128.800 MB/sec)
<6>[    0.330152] NET: Registered protocol family 16
<6>[    0.330642] L310 cache controller enabled
<6>[    0.330654] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330734] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330738] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330753] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330761] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331263] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331272] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331287] Power Management Mode Support For C2000: 
<6>[    0.331599] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.347429] PCIe0: Link Up Success 
<6>[    0.347436] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.347442] comcerto_pcie_rc_int_init
<6>[    0.347483] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338138] PCIe1: Link Up Failed 
<7>[    4.338273] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338333] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338348] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338468] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338565] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338575] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338588] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.349930] bio: create slab <bio-0> at 0
<4>[    4.519610] raid6: int32x1     25 MB/s
<4>[    4.687992] raid6: int32x2     48 MB/s
<4>[    4.858401] raid6: int32x4     82 MB/s
<4>[    5.028236] raid6: int32x8    113 MB/s
<4>[    5.028242] raid6: using algorithm int32x8 (113 MB/s)
<6>[    5.028433] vgaarb: loaded
<5>[    5.028735] SCSI subsystem initialized
<7>[    5.028868] libata version 3.00 loaded.
<6>[    5.029025] usbcore: registered new interface driver usbfs
<6>[    5.029106] usbcore: registered new interface driver hub
<6>[    5.029189] usbcore: registered new device driver usb
<6>[    5.029414] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029828] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.030210] Switching to clocksource timer2
<5>[    5.030442] FS-Cache: Loaded
<6>[    5.030567] CacheFiles: Loaded
<6>[    5.031452] NET: Registered protocol family 2
<6>[    5.031647] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.032292] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032473] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032631] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032638] TCP reno registered
<6>[    5.032646] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032676] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032922] NET: Registered protocol family 1
<6>[    5.033211] RPC: Registered named UNIX socket transport module.
<6>[    5.033219] RPC: Registered udp transport module.
<6>[    5.033224] RPC: Registered tcp transport module.
<6>[    5.033230] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.033253] PCI: CLS 32 bytes, default 32
<6>[    6.071581] membuf_init: created membuf device(253, 0)
<6>[    6.071862] audit: initializing netlink socket (disabled)
<5>[    6.071886] type=2000 audit(6.070:1): initialized
<5>[    6.072827] VFS: Disk quotas dquot_6.5.2
<4>[    6.072966] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073533] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.073783] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074445] fuse init (API version 7.17)
<6>[    6.074632] msgmni has been set to 932
<6>[    6.076331] async_tx: api initialized (async)
<6>[    6.076441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076450] io scheduler noop registered
<6>[    6.076455] io scheduler deadline registered
<6>[    6.076509] io scheduler cfq registered (default)
<6>[    6.076808] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.374900] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    7.025476] console [ttyS0] enabled
<6>[    7.134855] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.231630] brd: module loaded
<6>[    7.320959] loop: module loaded
<6>[    7.325485] nbd: registered device at major 43
<6>[    7.335262] SCSI Media Changer driver v0.25 
<7>[    7.339646] ahci 0000:00:00.0: version 3.0
<4>[    7.339664] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.345426] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.352455] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.357993] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.366120] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.375178] scsi0 : ahci
<6>[    7.378077] scsi1 : ahci
<6>[    7.380797] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.388131] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.395595] SATA Serdes: 48Mhz ref clk
<6>[    7.399839] Serdes2: Lane OK Passed
<4>[    7.403355] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.408040] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.415816] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.424395] scsi2 : ahci_platform
<6>[    7.427931] scsi3 : ahci_platform
<6>[    7.431418] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.439359] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.448208] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.457573] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.465474] Fixed MDIO Bus: probed
<6>[    7.468938] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.673130] Core Release: 2.81a
<4>[    7.676282] Setting default values for core params
<6>[    7.790254] ata3: SATA link down (SStatus 0 SControl 330)
<6>[    7.795710] ata4: SATA link down (SStatus 0 SControl 330)
<4>[    7.880863] Using Buffer DMA mode
<4>[    7.884188] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.890035] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.895626] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.900024] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.904830] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.904845] drivers/usb/core/inode.c: creating file '001'
<6>[    7.904857] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.911953] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.917341] Init: Port Power? op_state=1
<4>[    7.921281] Init: Power Port (0)
<7>[    7.924553] usb usb1: default language 0x0409
<7>[    7.924573] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.924580] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.931398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.938640] usb usb1: Product: DWC OTG Controller
<6>[    7.940262] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.949570] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.954915] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.959302] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.966125] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.973709] usb usb1: usb_probe_device
<7>[    7.973718] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.973742] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.973829] hub 1-0:1.0: usb_probe_interface
<7>[    7.973836] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.973843] hub 1-0:1.0: USB hub found
<6>[    7.974062] ata1.00: configured for UDMA/133
<6>[    7.981912] hub 1-0:1.0: 1 port detected
<7>[    7.985845] hub 1-0:1.0: standalone hub
<7>[    7.985851] hub 1-0:1.0: ganged power switching
<7>[    7.985856] hub 1-0:1.0: individual port over-current protection
<7>[    7.985862] hub 1-0:1.0: Single TT
<7>[    7.985868] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.985875] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.985888] hub 1-0:1.0: local power source is good
<7>[    7.985895] hub 1-0:1.0: enabling power on all ports
<7>[    7.986069] drivers/usb/core/inode.c: creating file '001'
<7>[    7.986192] Module dwc_common_port init
<6>[    7.986319] mousedev: PS/2 mouse device common for all mice
<5>[    7.986373] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    7.986386] ata1.00: set queue depth = 31
<4>[    7.986553] Check proc_name[ahci].
<5>[    8.007645] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.007657] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.007664] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    8.007852] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.007860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    8.007923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.040205] i2c /dev entries driver
<4>[    8.043827] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    8.051719] comcerto_wdt: support registered
<6>[    8.056031] md: linear personality registered for level -1
<6>[    8.061546] md: raid0 personality registered for level 0
<6>[    8.066941] md: raid1 personality registered for level 1
<6>[    8.072317] md: raid10 personality registered for level 10
<6>[    8.077843] md: raid6 personality registered for level 6
<6>[    8.083203] md: raid5 personality registered for level 5
<4>[    8.083274] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.083278] 
<7>[    8.083307] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[    8.097033] md: raid4 personality registered for level 4
<6>[    8.102371] md: multipath personality registered for level -4
<6>[    8.108480] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    8.117010] dm_crypt using the OCF for crypto acceleration.
<6>[    8.122799] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.123979]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.132420] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.138966] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.145605] device-mapper: multipath service-time: version 0.2.0 loaded
<5>[    8.154238] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.158976] ALSA device list:
<6>[    8.161974]   No soundcards found.
<6>[    8.166024] TCP cubic registered
<6>[    8.169264] NET: Registered protocol family 17
<6>[    8.173761] NET: Registered protocol family 15
<6>[    8.178217] Initializing NETLINK_KEY socket
<6>[    8.182431] NET: Registered protocol family 5
<6>[    8.186888] lib80211: common routines for IEEE802.11 drivers
<7>[    8.192578] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.192584] Registering the dns_resolver key type
<6>[    8.197338] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.205050] Clocks: disabled unused pll2
<6>[    8.208982] Clocks: disabled unused uart
<6>[    8.212920] Clocks: disabled unused gemtx
<6>[    8.216940] Clocks: disabled unused ipsec_spacc
<6>[    8.221486] Clocks: disabled unused dpi_cie
<6>[    8.225678] Clocks: disabled unused dpi_decomp
<6>[    8.230132] Clocks: disabled unused ntgref
<6>[    8.234246] Clocks: disabled unused pcie1
<6>[    8.238265] Clocks: disabled unused usb1
<6>[    8.242201] Clocks: disabled unused ext_phy0
<6>[    8.246481] Clocks: disabled unused ext_phy1
<6>[    8.250766] Clocks: disabled unused ext_phy2
<6>[    8.255045] Clocks: disabled unused tpi
<6>[    8.258890] Clocks: disabled unused csys
<6>[    8.262826] Clocks: disabled unused tsuntg
<6>[    8.266932] Clocks: disabled unused sata_occ
<6>[    8.271218] Clocks: disabled unused pcie_occ
<6>[    8.275497] Clocks: disabled unused sgmii_occ
<7>[    8.290304] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.290324] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.290328] 
<7>[    8.298831] hub 1-0:1.0: over-current change on port 1
<7>[    8.400305] hub 1-0:1.0: enabling power on all ports
<4>[    8.478839] Registering CPUFreq(comcerto)
<4>[    8.483185] Please be patient, while OpenWrt loads ...
<6>[    8.600270] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.607088] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.613910] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.621814] ata2.00: configured for UDMA/133
<5>[    8.626475] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.634615] ata2.00: set queue depth = 31
<4>[    8.638835] Check proc_name[ahci].
<5>[    8.642461] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.642571] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.655657] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.661156] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.665965] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.666038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.716137]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.721550] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.743739] Freeing init memory: 13476K
<6>[    9.254000] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.260748] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.521396] RTC_TIME:Tue Apr 28 08:14:01 2020  0.000000 seconds
<6>[    9.550301] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.554952] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.560918] Creating 2 MTD partitions on "spi0.0":
<5>[    9.565726] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.571472] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.581830] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.588915] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.594110] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.602753] Using default values for hw ecc
<4>[    9.610371] Bad block table not found for chip 0
<4>[    9.618372] Bad block table not found for chip 0
<6>[    9.623010] Scanning device for bad blocks
<4>[    9.628155] Bad eraseblock 18 at 0x000000240000
<4>[    9.635645] Bad eraseblock 72 at 0x000000900000
<4>[    9.655322] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.661641] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.692521] Bad eraseblock 863 at 0x000006be0000
<4>[    9.718165] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.737920] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.885811] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.895335] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.901652] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.908111] Creating 5 MTD partitions on "comcertonand":
<5>[    9.913471] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.919759] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.926124] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.932326] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.938664] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.951688] usbcore: registered new interface driver usbhid
<6>[    9.957278] usbhid: USB HID core driver
<6>[    9.966819] usbcore: registered new interface driver usblp
<6>[    9.979422] ## xhci_plat_probe
<6>[    9.982527] ### comcerto_start_xhci
<6>[    9.986035] USB3.0 clock selected: internal
<6>[    9.993482] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.998390] drivers/usb/core/inode.c: creating file '002'
<6>[    9.998411] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[   10.005637] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[   10.011018] usb usb2: default language 0x0409
<7>[   10.011037] usb usb2: udev 1, busnum 2, minor = 128
<6>[   10.011044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   10.017852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.025106] usb usb2: Product: xHCI Host Controller
<6>[   10.029996] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.035413] usb usb2: SerialNumber: xhci-hcd
<7>[   10.039952] usb usb2: usb_probe_device
<7>[   10.039961] usb usb2: configuration #1 chosen from 1 choice
<7>[   10.039973] xHCI xhci_add_endpoint called for root hub
<7>[   10.039980] xHCI xhci_check_bandwidth called for root hub
<7>[   10.039999] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[   10.040088] hub 2-0:1.0: usb_probe_interface
<7>[   10.040095] hub 2-0:1.0: usb_probe_interface - got id
<6>[   10.040102] hub 2-0:1.0: USB hub found
<6>[   10.043900] hub 2-0:1.0: 1 port detected
<7>[   10.047833] hub 2-0:1.0: standalone hub
<7>[   10.047838] hub 2-0:1.0: no power switching (usb 1.0)
<7>[   10.047844] hub 2-0:1.0: individual port over-current protection
<7>[   10.047850] hub 2-0:1.0: Single TT
<7>[   10.047856] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.047863] hub 2-0:1.0: power on to power good time: 20ms
<7>[   10.047877] hub 2-0:1.0: local power source is good
<7>[   10.047885] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.048029] drivers/usb/core/inode.c: creating file '001'
<6>[   10.048105] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[   10.053034] drivers/usb/core/inode.c: creating file '003'
<6>[   10.053048] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[   10.060161] usb usb3: skipped 1 descriptor after endpoint
<7>[   10.060173] usb usb3: default language 0x0409
<7>[   10.060190] usb usb3: udev 1, busnum 3, minor = 256
<6>[   10.060196] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[   10.067028] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   10.074277] usb usb3: Product: xHCI Host Controller
<6>[   10.079167] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[   10.084584] usb usb3: SerialNumber: xhci-hcd
<7>[   10.089096] usb usb3: usb_probe_device
<7>[   10.089105] usb usb3: configuration #1 chosen from 1 choice
<7>[   10.089114] xHCI xhci_add_endpoint called for root hub
<7>[   10.089120] xHCI xhci_check_bandwidth called for root hub
<7>[   10.089136] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[   10.089224] hub 3-0:1.0: usb_probe_interface
<7>[   10.089230] hub 3-0:1.0: usb_probe_interface - got id
<6>[   10.089237] hub 3-0:1.0: USB hub found
<6>[   10.093018] hub 3-0:1.0: 1 port detected
<7>[   10.096951] hub 3-0:1.0: standalone hub
<7>[   10.096956] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.096961] hub 3-0:1.0: individual port over-current protection
<7>[   10.096968] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.096975] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.096987] hub 3-0:1.0: local power source is good
<7>[   10.096993] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.097131] drivers/usb/core/inode.c: creating file '001'
<6>[   10.104674] Initializing USB Mass Storage driver...
<6>[   10.109680] usbcore: registered new interface driver usb-storage
<6>[   10.115721] USB Mass Storage support registered.
<7>[   10.140294] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.190300] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.241304] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.241342] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.360298] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.382432] usb 2-1: default language 0x0409
<7>[   10.382941] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.382951] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.389681] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.396942] usb 2-1: Product: USB2.0 Hub
<6>[   10.400912] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.405816] usb 2-1: usb_probe_device
<7>[   10.405828] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.412203] usb 2-1: Successful Endpoint Configure command
<7>[   10.412445] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.412589] hub 2-1:1.0: usb_probe_interface
<7>[   10.412597] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.412605] hub 2-1:1.0: USB hub found
<6>[   10.416620] hub 2-1:1.0: 4 ports detected
<7>[   10.420714] hub 2-1:1.0: standalone hub
<7>[   10.420724] hub 2-1:1.0: individual port power switching
<7>[   10.420730] hub 2-1:1.0: individual port over-current protection
<7>[   10.444176] usb 2-1: Successful Endpoint Configure command
<7>[   10.444473] hub 2-1:1.0: TT per port
<7>[   10.444483] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.444489] hub 2-1:1.0: Port indicators are supported
<7>[   10.444495] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.444763] usb 2-1: Successful Endpoint Configure command
<7>[   10.445323] hub 2-1:1.0: local power source is good
<7>[   10.445333] hub 2-1:1.0: enabling power on all ports
<7>[   10.446610] drivers/usb/core/inode.c: creating file '002'
<7>[   10.446707] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.446739] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.489028] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.495454] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<4>[   10.536929] flashcache: flashcache-1.0-dummy initialized
<7>[   10.543276] hub 2-1:1.0: port 4: status 0301 change 0001
<6>[   10.570413] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.592164] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.592337] usb 3-1: default language 0x0409
<7>[   10.592871] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.592880] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.599603] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.606777] usb 3-1: Product: USB3.0 Hub
<6>[   10.610718] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.615517] usb 3-1: usb_probe_device
<7>[   10.615528] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.620138] usb 3-1: Successful Endpoint Configure command
<7>[   10.620319] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.620726] hub 3-1:1.0: usb_probe_interface
<7>[   10.620735] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.620741] hub 3-1:1.0: USB hub found
<6>[   10.624781] hub 3-1:1.0: 4 ports detected
<7>[   10.628806] hub 3-1:1.0: standalone hub
<7>[   10.628811] hub 3-1:1.0: individual port power switching
<7>[   10.628817] hub 3-1:1.0: individual port over-current protection
<7>[   10.628825] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.628832] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.629009] usb 3-1: Successful Endpoint Configure command
<7>[   10.629152] hub 3-1:1.0: local power source is good
<7>[   10.629261] hub 3-1:1.0: enabling power on all ports
<7>[   10.630056] drivers/usb/core/inode.c: creating file '002'
<7>[   10.640276] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[   10.640458] hub 2-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
<5>[   10.712863] UBI: attaching mtd3 to ubi0
<5>[   10.716715] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   10.723027] UBI: logical eraseblock size:    126976 bytes
<6>[   10.723197] usb 2-1.4: new low-speed USB device number 3 using xhci-hcd
<5>[   10.735072] UBI: smallest flash I/O unit:    2048
<5>[   10.739789] UBI: VID header offset:          2048 (aligned 2048)
<7>[   10.744298] usb 2-1.4: skipped 1 descriptor after interface
<7>[   10.744853] usb 2-1.4: default language 0x0409
<5>[   10.745815] UBI: data offset:                4096
<7>[   10.751866] usb 2-1.4: udev 3, busnum 2, minor = 130
<6>[   10.751875] usb 2-1.4: New USB device found, idVendor=051d, idProduct=0002
<6>[   10.758772] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[   10.766122] usb 2-1.4: Product: Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 
<6>[   10.773031] usb 2-1.4: Manufacturer: American Power Conversion
<6>[   10.778880] usb 2-1.4: SerialNumber: 3B1524X23300  
<7>[   10.784477] usb 2-1.4: usb_probe_device
<7>[   10.784488] usb 2-1.4: configuration #1 chosen from 1 choice
<4>[   10.784554] usb 2-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<7>[   10.796131] usb 2-1.4: Successful Endpoint Configure command
<7>[   10.796825] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
<7>[   10.796942] usbhid 2-1.4:1.0: usb_probe_interface
<7>[   10.796951] usbhid 2-1.4:1.0: usb_probe_interface - got id
<7>[   11.122255] usbhid 2-1.4:1.0: looking for a minor, starting at 96
<6>[   11.122428] generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1400U  FW:926.T1 .I USB FW:T1 ] on usb-xhci-hcd-1.4/input0
<7>[   11.138178] drivers/usb/core/inode.c: creating file '003'
<7>[   11.138256] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   12.227268] UBI: max. sequence number:       2
<5>[   12.244086] UBI: attached mtd3 to ubi0
<5>[   12.247846] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.253546] UBI: MTD device size:            216 MiB
<5>[   12.258523] UBI: number of good PEBs:        1723
<5>[   12.263246] UBI: number of bad PEBs:         5
<5>[   12.267701] UBI: number of corrupted PEBs:   0
<5>[   12.272160] UBI: max. allowed volumes:       128
<5>[   12.276788] UBI: wear-leveling threshold:    4096
<5>[   12.281508] UBI: number of internal volumes: 1
<5>[   12.285962] UBI: number of user volumes:     1
<5>[   12.290420] UBI: available PEBs:             0
<5>[   12.294873] UBI: total number of reserved PEBs: 1723
<5>[   12.299849] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.305962] UBI: max/mean erase counter: 25/16
<5>[   12.310420] UBI: image sequence number:  1486693232
<5>[   12.315322] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.437358] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.443498] UBIFS: mounted read-only
<5>[   12.447085] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.455128] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.462472] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.468321] UBIFS: default compressor: lzo
<5>[   12.472441] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.844766] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.899252] UBI: mtd3 is detached from ubi0
<6>[   33.912244] usbcore: registered new interface driver usbserial
<6>[   33.918096] usbserial: USB Serial Driver core
<6>[   33.928018] USB Serial support registered for pl2303
<6>[   33.933118] usbcore: registered new interface driver pl2303
<6>[   33.938706] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   33.950581] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   33.964216] ufsd: module license 'Commercial product' taints kernel.
<4>[   33.970633] Disabling lock debugging due to kernel taint
<5>[   33.997029] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   33.997035] NTFSJ support included
<5>[   33.997037] exFAT support included
<5>[   33.997039] Hfs+J support included
<5>[   33.997041] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.024280] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.028736] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.302268] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.311578] udev: starting version 140
<6>[   34.318442] pfe_module_init
<6>[   34.321313] pfe_platform_probe
<6>[   34.325408] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.331239] pfe_probe
<6>[   34.333518] PFE Driver version:
<6>[   34.333520] pfe_ctrl_10_00_4
<6>[   34.333522] built with pfe sources version: pfe_10_00_3
<6>[   34.344793] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.354389] pfe_hw_init
<6>[   34.356840] CLASS version: 20
<6>[   34.359814] TMU version: 1011231
<6>[   34.363053] BMU1 version: 21
<6>[   34.365939] BMU2 version: 21
<6>[   34.368825] EMAC1 network cfg: 80000
<6>[   34.372412] EMAC2 network cfg: 80000
<6>[   34.375994] EMAC3 network cfg: 80000
<6>[   34.379577] EGPI1 version: 50
<6>[   34.382556] EGPI2 version: 50
<6>[   34.385529] EGPI3 version: 50
<6>[   34.388502] HGPI version: 50
<6>[   34.391392] GPT version: 0
<6>[   34.394104] HIF version: 10
<6>[   34.396902] HIF NOPCY version: 10
<6>[   34.400224] UTIL version: 20
<6>[   34.403114] bmu_init(1) done
<6>[   34.406002] bmu_init(2) done
<6>[   34.415356] class_init() done
<6>[   34.418335] tmu_init: mem init
<6>[   34.421402] tmu_init: lmem init
<6>[   34.424594] tmu_init() done
<6>[   34.427393] util_init() done
<6>[   34.430287] gpi_init(1) done
<6>[   34.433175] gpi_init(2) done
<6>[   34.436063] gpi_init(3) done
<6>[   34.438950] gpi_init(hif) done
<6>[   34.442015] bmu_enable(1) done
<6>[   34.445075] bmu_enable(2) done
<6>[   34.448136] pfe_hif_lib_init
<6>[   34.451198] pfe_hif_init
<6>[   34.453737] pfe_hif_alloc_descr
<6>[   34.456983] pfe_hif_init_buffers
<6>[   34.460350] pfe_firmware_init
<6>[   34.622913] pfe_load_elf
<3>[   34.625467] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b96000) rcvd
<6>[   34.656953] PFE binary version: pfe_10_00_3
<6>[   34.661164] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.667621] pfe_load_elf
<6>[   34.671544] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.676870] pfe_load_elf
<6>[   34.681200] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.686738] pfe_ctrl_init
<6>[   34.707494] pfe_ctrl_init finished
<6>[   34.707500] pfe_ctrl_timer
<6>[   34.713651] pfe_eth_init
<6>[   34.724946] Comcerto MDIO Bus: probed
<6>[   34.729909] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.738408] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.745265] pfe_vwd_init
<6>[   34.747907] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.752908] pfe_vwd_driver_init: start
<4>[   34.756672] pfe_vwd_up: start
<6>[   34.759710] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.766799] pfe_vwd_driver_init: end
<6>[   34.770391] pfe_pcap_init
<6>[   34.814032] eth0: pfe_eth_open
<6>[   34.817259] hif_process_client_req: register client_id 0
<6>[   34.822619] pfe_hif_client_register
<6>[   34.826134] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.834474] eth0: pfe_gemac_init
<6>[   34.860416] eth0: pfe_eth_close
<6>[   34.900250] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.909673] hif_process_client_req: unregister client_id 0
<6>[   34.915177] pfe_hif_client_unregister
<6>[   34.919288] eth1: pfe_eth_open
<6>[   34.922480] hif_process_client_req: register client_id 1
<6>[   34.927806] pfe_hif_client_register
<6>[   34.931329] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   34.939617] eth1: pfe_gemac_init
<6>[   34.943496] eth1: pfe_eth_close
<6>[   34.980246] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.989666] hif_process_client_req: unregister client_id 1
<6>[   34.995171] pfe_hif_client_unregister
<6>[   35.435967] kjournald starting.  Commit interval 5 seconds
<6>[   35.436239] EXT3-fs (sda1): using internal journal
<6>[   35.436249] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.832275] kjournald starting.  Commit interval 5 seconds
<6>[   35.838577] EXT3-fs (sda1): using internal journal
<6>[   35.843413] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.379187] kjournald starting.  Commit interval 5 seconds
<6>[   36.379469] EXT3-fs (sdb1): using internal journal
<6>[   36.379480] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   36.751739] md: md9 stopped.
<6>[   36.757135] md: bind<sdb1>
<6>[   36.760154] md: bind<sda1>
<6>[   36.766009] bio: create slab <bio-1> at 1
<6>[   36.770277] md/raid1:md9: active with 2 out of 32 mirrors
<6>[   36.775854] created bitmap (1 pages) for device md9
<6>[   36.780937] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   36.806952] md9: detected capacity change from 0 to 542769152
<6>[   37.866641]  md9: unknown partition table
<6>[   38.067612] kjournald starting.  Commit interval 5 seconds
<6>[   38.080516] EXT3-fs (md9): using internal journal
<6>[   38.085240] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   38.399101] md: md13 stopped.
<6>[   38.407543] md: bind<sdb4>
<6>[   38.410597] md: bind<sda4>
<6>[   38.416453] md/raid1:md13: active with 2 out of 32 mirrors
<6>[   38.422136] created bitmap (1 pages) for device md13
<6>[   38.427292] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   38.473490] md13: detected capacity change from 0 to 469893120
<4>[   60.641287] set stripe cache size 1024
<4>[   60.645641] STRIPE_CACHE_SIZE is 1024
<6>[   61.631167] md: bind<sda2>
<6>[   61.641488] md: bind<sdb2>
<6>[   61.647316] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   61.653024] created bitmap (1 pages) for device md256
<6>[   61.658296] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   61.687014] md256: detected capacity change from 0 to 542834688
<6>[   61.772865]  md256: unknown partition table
<6>[   61.841470] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   62.225342] md: bind<sda5>
<6>[   62.228288] md: bind<sdb5>
<6>[   62.234158] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   62.239847] created bitmap (1 pages) for device md322
<6>[   62.245179] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   62.272147] md322: detected capacity change from 0 to 7408779264
<6>[   62.334375]  md322: unknown partition table
<6>[   62.405735] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   62.977576]  md13: unknown partition table
<6>[   63.628244] md: md1 stopped.
<6>[   63.881667] md: bind<sdb3>
<6>[   63.884698] md: bind<sda3>
<6>[   63.890550] md/raid1:md1: active with 2 out of 2 mirrors
<6>[   63.895955] md1: detected capacity change from 0 to 5990981238784
<6>[   63.966580]  md1: unknown partition table
<6>[   74.523626] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[   81.537317] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[   85.424247] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[   86.468436] [S30mountall] start
<5>[   86.900609] UBI: attaching mtd3 to ubi0
<5>[   86.904463] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   86.910763] UBI: logical eraseblock size:    126976 bytes
<5>[   86.916175] UBI: smallest flash I/O unit:    2048
<5>[   86.920910] UBI: VID header offset:          2048 (aligned 2048)
<5>[   86.926932] UBI: data offset:                4096
<5>[   88.410507] UBI: max. sequence number:       2
<5>[   88.427369] UBI: attached mtd3 to ubi0
<5>[   88.431152] UBI: MTD device name:            "boot1_rootfs2"
<5>[   88.436827] UBI: MTD device size:            216 MiB
<5>[   88.441810] UBI: number of good PEBs:        1723
<5>[   88.446527] UBI: number of bad PEBs:         5
<5>[   88.450995] UBI: number of corrupted PEBs:   0
<5>[   88.455450] UBI: max. allowed volumes:       128
<5>[   88.460077] UBI: wear-leveling threshold:    4096
<5>[   88.464796] UBI: number of internal volumes: 1
<5>[   88.469250] UBI: number of user volumes:     1
<5>[   88.473707] UBI: available PEBs:             0
<5>[   88.478161] UBI: total number of reserved PEBs: 1723
<5>[   88.483141] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   88.489251] UBI: max/mean erase counter: 25/16
<5>[   88.493708] UBI: image sequence number:  1486693232
<5>[   88.498610] UBI: background thread "ubi_bgt0d" started, PID 1606
<5>[   88.629164] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   88.635298] UBIFS: mounted read-only
<5>[   88.638885] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   88.646924] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   88.654262] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   88.660110] UBIFS: default compressor: lzo
<5>[   88.664223] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  111.221115] UBIFS: un-mount UBI device 0, volume 0
<5>[  111.266509] UBI: mtd3 is detached from ubi0
<5>[  111.644121] UBI: attaching mtd3 to ubi0
<5>[  111.647974] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  111.654293] UBI: logical eraseblock size:    126976 bytes
<5>[  111.659705] UBI: smallest flash I/O unit:    2048
<5>[  111.664436] UBI: VID header offset:          2048 (aligned 2048)
<5>[  111.670465] UBI: data offset:                4096
<5>[  113.152349] UBI: max. sequence number:       2
<5>[  113.169205] UBI: attached mtd3 to ubi0
<5>[  113.172990] UBI: MTD device name:            "boot1_rootfs2"
<5>[  113.178664] UBI: MTD device size:            216 MiB
<5>[  113.183647] UBI: number of good PEBs:        1723
<5>[  113.188362] UBI: number of bad PEBs:         5
<5>[  113.192819] UBI: number of corrupted PEBs:   0
<5>[  113.197274] UBI: max. allowed volumes:       128
<5>[  113.201905] UBI: wear-leveling threshold:    4096
<5>[  113.206620] UBI: number of internal volumes: 1
<5>[  113.211078] UBI: number of user volumes:     1
<5>[  113.215531] UBI: available PEBs:             0
<5>[  113.219984] UBI: total number of reserved PEBs: 1723
<5>[  113.224964] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  113.231076] UBI: max/mean erase counter: 25/16
<5>[  113.235530] UBI: image sequence number:  1486693232
<5>[  113.240434] UBI: background thread "ubi_bgt0d" started, PID 1739
<5>[  113.362715] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  113.368829] UBIFS: mounted read-only
<5>[  113.372427] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  113.380465] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  113.387794] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  113.393647] UBIFS: default compressor: lzo
<5>[  113.397754] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  113.474012] UBIFS: un-mount UBI device 0, volume 0
<5>[  113.536319] UBI: mtd3 is detached from ubi0
<6>[  113.799347] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
<5>[  130.899874] UBI: attaching mtd6 to ubi2
<5>[  130.903781] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  130.910066] UBI: logical eraseblock size:    126976 bytes
<5>[  130.915509] UBI: smallest flash I/O unit:    2048
<5>[  130.920249] UBI: VID header offset:          2048 (aligned 2048)
<5>[  130.926290] UBI: data offset:                4096
<5>[  131.198832] UBI: max. sequence number:       653
<5>[  131.232224] UBI: attached mtd6 to ubi2
<5>[  131.235989] UBI: MTD device name:            "config"
<5>[  131.241135] UBI: MTD device size:            15 MiB
<5>[  131.246027] UBI: number of good PEBs:        120
<5>[  131.250668] UBI: number of bad PEBs:         0
<5>[  131.255122] UBI: number of corrupted PEBs:   0
<5>[  131.259576] UBI: max. allowed volumes:       128
<5>[  131.264211] UBI: wear-leveling threshold:    4096
<5>[  131.268926] UBI: number of internal volumes: 1
<5>[  131.273385] UBI: number of user volumes:     1
<5>[  131.277839] UBI: available PEBs:             0
<5>[  131.282299] UBI: total number of reserved PEBs: 120
<5>[  131.287189] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  131.293221] UBI: max/mean erase counter: 7/6
<5>[  131.297502] UBI: image sequence number:  1872325126
<5>[  131.310299] UBI: background thread "ubi_bgt2d" started, PID 2184
<5>[  131.643369] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  131.649399] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  131.657009] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  131.664345] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  131.670193] UBIFS: default compressor: lzo
<5>[  131.674305] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  132.429705] UBIFS: un-mount UBI device 2, volume 0
<5>[  132.523458] UBI: mtd6 is detached from ubi2
<4>[  132.550024] [S30mountall] end
<4>[  132.553804] [S31init_hardware] start
<6>[  132.764220] sysinfo: Module loaded.
<6>[  133.328218] fnotify: Load file notify kernel module.
<6>[  134.768771] usbcore: registered new interface driver snd-usb-audio
<6>[  134.789480] usbcore: registered new interface driver snd-usb-caiaq
<6>[  134.820621] Linux video capture interface: v2.00
<6>[  134.892077] usbcore: registered new interface driver uvcvideo
<6>[  134.897846] USB Video Class driver (1.1.1)
<6>[  135.212133] NET: Registered protocol family 10
<4>[  138.159590] [S31init_hardware] end
<4>[  138.163685] [S32init_mac_addr] start
<6>[  138.802300] eth0: pfe_eth_open
<6>[  138.805500] hif_process_client_req: register client_id 1
<6>[  138.810842] pfe_hif_client_register
<6>[  138.814345] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  138.822643] eth0: pfe_gemac_init
<6>[  138.826450] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  139.431556] eth1: pfe_eth_open
<6>[  139.434758] hif_process_client_req: register client_id 0
<6>[  139.440084] pfe_hif_client_register
<6>[  139.443615] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  139.451919] eth1: pfe_gemac_init
<6>[  139.455863] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  141.749632] [S32init_mac_addr] end
<4>[  141.753697] [S33sysinit] start
<6>[  141.820485] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  141.825920] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  153.590256] eth0: no IPv6 routers present
<5>[  162.916116] UBI: attaching mtd6 to ubi2
<5>[  162.919968] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  162.926278] UBI: logical eraseblock size:    126976 bytes
<5>[  162.931699] UBI: smallest flash I/O unit:    2048
<5>[  162.936415] UBI: VID header offset:          2048 (aligned 2048)
<5>[  162.942442] UBI: data offset:                4096
<5>[  163.050242] UBI: max. sequence number:       656
<5>[  163.065554] UBI: attached mtd6 to ubi2
<5>[  163.069326] UBI: MTD device name:            "config"
<5>[  163.074418] UBI: MTD device size:            15 MiB
<5>[  163.079308] UBI: number of good PEBs:        120
<5>[  163.083944] UBI: number of bad PEBs:         0
<5>[  163.088399] UBI: number of corrupted PEBs:   0
<5>[  163.092858] UBI: max. allowed volumes:       128
<5>[  163.097486] UBI: wear-leveling threshold:    4096
<5>[  163.102205] UBI: number of internal volumes: 1
<5>[  163.106660] UBI: number of user volumes:     1
<5>[  163.111121] UBI: available PEBs:             0
<5>[  163.115580] UBI: total number of reserved PEBs: 120
<5>[  163.120478] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  163.126500] UBI: max/mean erase counter: 7/6
<5>[  163.130785] UBI: image sequence number:  1872325126
<5>[  163.135761] UBI: background thread "ubi_bgt2d" started, PID 2838
<5>[  163.257152] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  163.263200] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  163.270800] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  163.278129] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  163.283986] UBIFS: default compressor: lzo
<5>[  163.288093] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  163.308353] UBIFS: un-mount UBI device 2, volume 0
<6>[  221.820460] PHY: comcerto-0:06 - Link is Down
<6>[  222.820458] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[  235.006343] [S33sysinit] end
<4>[  235.009815] [S34shutdown_check] start
<4>[  235.285345] [S34shutdown_check] end
<4>[  235.289624] [S35init_disk] start
<5>[  235.596157] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  235.602212] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  235.609805] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  235.617141] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  235.622997] UBIFS: default compressor: lzo
<5>[  235.627104] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  235.766599] UBIFS: un-mount UBI device 2, volume 0
<5>[  235.826257] UBI: mtd6 is detached from ubi2
<4>[  237.329784] [S35init_disk] end
<4>[  237.333598] [S40init_network] start
<4>[  237.347135] [S40init_network] end
<4>[  237.351192] [S42hostname] start
<4>[  237.812070] [S42hostname] end
<4>[  237.815649] [S45network] start
<5>[  247.846476] Bridge firewalling registered
<6>[  248.384195] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  248.391389] bonding: MII link monitoring set to 100 ms
<6>[  256.187203] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  265.091322] [S45network] end
<4>[  265.094780] [S46iSCSItrgt] start
<4>[  270.533416] [S46iSCSItrgt] end
<4>[  270.537038] [S46iscsiinit] start
<6>[  270.587870] Loading iSCSI transport class v2.0-870.
<5>[  270.617837] iscsi: registered transport (tcp)
<4>[  271.997913] [S46iscsiinit] end
<4>[  272.001705] [S55urandom] start
<4>[  272.042680] [S55urandom] end
<4>[  272.046119] [S56mariadb] start
<4>[  279.549480] [S56mariadb] end
<4>[  279.552995] [S56start_service] start
<4>[  279.644132] [S56start_service] end
<4>[  279.648089] [S57init_qpkg] start
<4>[  407.277994] [S57init_qpkg] end
<4>[  407.281654] [S57ldap] start
<4>[  407.319997] [S57ldap] end
<4>[  407.323291] [S58dbus] start
<4>[  409.523500] [S58dbus] end
<4>[  409.526683] [S58nsswitch] start
<4>[  409.717429] [S58nsswitch] end
<4>[  409.721069] [S58printer] start
<4>[  409.777676] [S58printer] end
<4>[  414.785047] [S59Qthttpd] start
<4>[  421.121655] ==== memory usage ====
<4>[  421.142028] MemTotal:         490756 kB
<4>[  421.145920] MemFree:           79760 kB
<4>[  421.149780] Buffers:           18720 kB
<4>[  421.153966] Cached:           275204 kB
<4>[  421.157830] SwapCached:           84 kB
<4>[  421.161720] Active:           106908 kB
<4>[  421.165589] Inactive:         251716 kB
<4>[  421.169449] Active(anon):      52264 kB
<4>[  421.173328] Inactive(anon):    57848 kB
<4>[  421.177215] Active(file):      54644 kB
<4>[  421.181108] Inactive(file):   193868 kB
<4>[  421.184975] Unevictable:        2012 kB
<4>[  421.188846] Mlocked:            2012 kB
<4>[  421.192731] SwapTotal:      24542452 kB
<4>[  421.199263] SwapFree:       24542312 kB
<4>[  421.203198] Dirty:                24 kB
<4>[  421.207100] Writeback:             0 kB
<4>[  421.211026] AnonPages:         66608 kB
<4>[  421.215040] Mapped:            16272 kB
<4>[  421.218908] Shmem:             45276 kB
<4>[  421.222852] Slab:              34432 kB
<4>[  421.226738] SReclaimable:      22388 kB
<4>[  421.230657] SUnreclaim:        12044 kB
<4>[  421.234540] KernelStack:        1752 kB
<4>[  421.238409] PageTables:         1252 kB
<4>[  421.242323] NFS_Unstable:          0 kB
<4>[  421.246220] Bounce:                0 kB
<4>[  421.251189] WritebackTmp:          0 kB
<4>[  421.255069] CommitLimit:    24787828 kB
<4>[  421.258927] Committed_AS:    1031444 kB
<4>[  421.268358] VmallocTotal:    1302528 kB
<4>[  421.274830] VmallocUsed:       61368 kB
<4>[  421.278737] VmallocChunk:    1212348 kB
<4>[  421.303914] Node 0, zone      DMA
<4>[  421.308487]   pages free     10977
<4>[  421.312033]         min      366
<4>[  421.316294]         low      457
<4>[  421.319576]         high     549
<4>[  421.323737]         scanned  0
<4>[  421.326847]         spanned  11264
<4>[  421.330310]         present  11154
<4>[  421.333738]     nr_free_pages 10977
<4>[  421.337252]     nr_inactive_anon 0
<4>[  421.340690]     nr_active_anon 0
<4>[  421.343946]     nr_inactive_file 0
<4>[  421.347465]     nr_active_file 0
<4>[  421.352079]     nr_unevictable 0
<4>[  421.356945]     nr_mlock     0
<4>[  421.360043]     nr_anon_pages 0
<4>[  421.363255]     nr_mapped    0
<4>[  421.366338]     nr_file_pages 0
<4>[  421.369500]     nr_dirty     0
<4>[  421.372597]     nr_writeback 0
<4>[  421.376741]     nr_slab_reclaimable 0
<4>[  421.381459]     nr_slab_unreclaimable 0
<4>[  421.386281]     nr_page_table_pages 0
<4>[  421.390693]     nr_kernel_stack 0
<4>[  421.394063]     nr_unstable  0
<4>[  421.397152]     nr_bounce    0
<4>[  421.400278]     nr_vmscan_write 0
<4>[  421.403622]     nr_vmscan_immediate_reclaim 0
<4>[  421.408006]     nr_writeback_temp 0
<4>[  421.411539]     nr_isolated_anon 0
<4>[  421.415114]     nr_isolated_file 0
<4>[  421.419317]     nr_shmem     0
<4>[  421.422476]     nr_dirtied   0
<4>[  421.425565]     nr_written   0
<4>[  421.428645]     nr_anon_transparent_hugepages 0
<4>[  421.433283]         protection: (0, 443, 443)
<4>[  421.437669]   pagesets
<4>[  421.440055]     cpu: 0
<4>[  421.442483]               count: 1
<4>[  421.447125]               high:  6
<4>[  421.450627]               batch: 1
<4>[  421.454091]   vm stats threshold: 4
<4>[  421.457669]     cpu: 1
<4>[  421.460063]               count: 0
<4>[  421.463514]               high:  6
<4>[  421.466941]               batch: 1
<4>[  421.470616]   vm stats threshold: 4
<4>[  421.474928]   all_unreclaimable: 0
<4>[  421.478383]   start_pfn:         0
<4>[  421.481908]   inactive_ratio:    1
<4>[  421.485339] Node 0, zone   Normal
<4>[  421.489644]   pages free     8899
<4>[  421.493025]         min      3729
<4>[  421.496375]         low      4661
<4>[  421.499794]         high     5593
<4>[  421.503922]         scanned  0
<4>[  421.507032]         spanned  119808
<4>[  421.510577]         present  113518
<4>[  421.514095]     nr_free_pages 8899
<4>[  421.517523]     nr_inactive_anon 14462
<4>[  421.521306]     nr_active_anon 13040
<4>[  421.524931]     nr_inactive_file 48493
<4>[  421.528772]     nr_active_file 13661
<4>[  421.533152]     nr_unevictable 503
<4>[  421.536607]     nr_mlock     503
<4>[  421.539870]     nr_anon_pages 16633
<4>[  421.543417]     nr_mapped    4049
<4>[  421.546758]     nr_file_pages 73540
<4>[  421.550282]     nr_dirty     6
<4>[  421.553359]     nr_writeback 0
<4>[  421.556449]     nr_slab_reclaimable 5636
<4>[  421.562490]     nr_slab_unreclaimable 3011
<4>[  421.566646]     nr_page_table_pages 313
<4>[  421.570560]     nr_kernel_stack 219
<4>[  421.574098]     nr_unstable  0
<4>[  421.577186]     nr_bounce    0
<4>[  421.580285]     nr_vmscan_write 35
<4>[  421.583711]     nr_vmscan_immediate_reclaim 0
<4>[  421.588101]     nr_writeback_temp 0
<4>[  421.591625]     nr_isolated_anon 0
<4>[  421.595062]     nr_isolated_file 0
<4>[  421.598483]     nr_shmem     11319
<4>[  421.601972]     nr_dirtied   238976
<4>[  421.607022]     nr_written   236844
<4>[  421.610600]     nr_anon_transparent_hugepages 0
<4>[  421.615167]         protection: (0, 0, 0)
<4>[  421.619204]   pagesets
<4>[  421.621601]     cpu: 0
<4>[  421.623981]               count: 155
<4>[  421.627587]               high:  186
<4>[  421.632021]               batch: 31
<4>[  421.635558]   vm stats threshold: 12
<4>[  421.639171]     cpu: 1
<4>[  421.641621]               count: 83
<4>[  421.645137]               high:  186
<4>[  421.648789]               batch: 31
<4>[  421.652338]   vm stats threshold: 12
<4>[  421.656044]   all_unreclaimable: 0
<4>[  421.660272]   start_pfn:         11264
<4>[  421.664075]   inactive_ratio:    1
<4>[  421.684790] Filename				Type		Size	Used	Priority
<4>[  421.689463] /dev/md256                              partition	530108	140	-1
<4>[  421.696604] /dev/md322                              partition	7235132	0	-2
<4>[  421.703575] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  421.726137]               total         used         free       shared      buffers
<4>[  421.726143]   Mem:       490756       411212        79544            0        18724
<4>[  421.726147]  Swap:     24542452          140     24542312
<4>[  421.726150] Total:     25033208       411352     24621856
<4>[  421.767147] ==== end ====
<4>[  430.669618] [S59Qthttpd] end
<4>[  430.674655] [S62cupsd] start
<4>[  431.926247] [S62cupsd] end
<4>[  431.929485] [S62ntpd] start
<4>[  432.012066] [S62ntpd] end
<4>[  432.015212] [S62smb] start
<4>[  456.935503] [S62smb] end
<4>[  456.938720] [S64MediaService] start
<4>[  457.522807] [S64MediaService] end
<4>[  457.526989] [S65thttpd] start
<6>[  463.830444] PHY: comcerto-0:06 - Link is Down
<4>[  465.455887] [S65thttpd] end
<4>[  465.459305] [S66ImRd] start
<4>[  465.463939] [S66ImRd] end
<4>[  465.467345] [S66wfm_thttpd] start
<6>[  466.830532] PHY: comcerto-0:06 - Link is Up - 1000/Full
<4>[  468.589574] [S66wfm_thttpd] end
<4>[  468.593297] [S67ftp] start
<4>[  468.782891] [S67ftp] end
<4>[  468.786050] [S70crond] start
<4>[  468.790375] [S70crond] end
<4>[  468.793820] [S72logo] start
<4>[  468.798198] [S72logo] end
<4>[  468.801511] [S73ntpclient] start
<4>[  468.806073] [S73ntpclient] end
<4>[  468.809744] [S75stunnel] start
<4>[  468.828420] [S75stunnel] end
<4>[  468.836756] [S77recycled] start
<4>[  470.091130] [S77recycled] end
<4>[  470.094760] [S78qraid1] start
<4>[  470.110479] [S78qraid1] end
<4>[  470.121115] [S83ups] start
<4>[  470.125377] [S83ups] end
<4>[  470.128816] [S85login] start
<4>[  470.168201] [S85login] end
<4>[  470.191150] [S89bonjour] start
<4>[  470.202900] [S89bonjour] end
<4>[  470.246274] [S89wsd] start
<4>[  470.250516] [S89wsd] end
<6>[  472.035128] Bluetooth: Core ver 2.16
<6>[  472.038780] NET: Registered protocol family 31
<6>[  472.043289] Bluetooth: HCI device and connection manager initialized
<6>[  472.049685] Bluetooth: HCI socket layer initialized
<6>[  472.054619] Bluetooth: L2CAP socket layer initialized
<6>[  472.059723] Bluetooth: SCO socket layer initialized
<6>[  472.128748] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  472.134566] usbcore: registered new interface driver btusb
<6>[  472.230323] Bluetooth: RFCOMM TTY layer initialized
<6>[  472.235232] Bluetooth: RFCOMM socket layer initialized
<6>[  472.240421] Bluetooth: RFCOMM ver 1.11
<4>[  481.123689] [S90twonkymedia] start
<4>[  481.128467] [S90twonkymedia] end
<4>[  481.132444] [S92lunportman] start
<4>[  481.137224] [S92lunportman] end
<4>[  481.141216] [S95snmp] start
<4>[  481.145369] [S95snmp] end
<4>[  481.157864] [S97upnpd] start
<4>[  481.162170] [S97upnpd] end
<4>[  481.168973] [S98init_nas] start
<5>[  489.111771] UBI: attaching mtd6 to ubi2
<5>[  489.115630] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  489.121977] UBI: logical eraseblock size:    126976 bytes
<5>[  489.127407] UBI: smallest flash I/O unit:    2048
<5>[  489.132141] UBI: VID header offset:          2048 (aligned 2048)
<5>[  489.138186] UBI: data offset:                4096
<5>[  489.257910] UBI: max. sequence number:       658
<5>[  489.273179] UBI: attached mtd6 to ubi2
<5>[  489.276945] UBI: MTD device name:            "config"
<5>[  489.282045] UBI: MTD device size:            15 MiB
<5>[  489.286936] UBI: number of good PEBs:        120
<5>[  489.291586] UBI: number of bad PEBs:         0
<5>[  489.296047] UBI: number of corrupted PEBs:   0
<5>[  489.300510] UBI: max. allowed volumes:       128
<5>[  489.305138] UBI: wear-leveling threshold:    4096
<5>[  489.309852] UBI: number of internal volumes: 1
<5>[  489.314313] UBI: number of user volumes:     1
<5>[  489.318767] UBI: available PEBs:             0
<5>[  489.323228] UBI: total number of reserved PEBs: 120
<5>[  489.328116] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  489.334150] UBI: max/mean erase counter: 7/6
<5>[  489.338436] UBI: image sequence number:  1872325126
<5>[  489.343393] UBI: background thread "ubi_bgt2d" started, PID 12271
<5>[  489.475760] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  489.481821] UBIFS: mounted read-only
<5>[  489.485408] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  489.493012] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  489.500352] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  489.506200] UBIFS: default compressor: lzo
<5>[  489.510314] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  489.523120] UBIFS: un-mount UBI device 2, volume 0
<5>[  489.596150] UBI: mtd6 is detached from ubi2
<4>[  491.846217] rule type=2, num=2
<4>[  495.887559] [S98init_nas] end
<4>[  495.892013] [S99atalk] start
<4>[  495.902626] [S99atalk] end
<4>[  495.912549] [S99cloudinstall_report_complete_daemon] start
<4>[  495.919424] [S99cloudinstall_report_complete_daemon] end
<4>[  495.961159] [S99init_iTune] start
<4>[  495.965896] [S99init_iTune] end
<4>[  495.969636] [S99mysqld] start
<4>[  496.001884] [S99mysqld] end
<4>[  496.005330] [S99nfs] start
<4>[  496.032079] [S99nfs] end
<4>[  496.060935] [S99porter] start
<4>[  496.065349] [S99porter] end
<4>[  496.068877] [S99qanalytic] start
<4>[  496.130837] [S99qanalytic] end
<4>[  496.134519] [S99qcloud] start
<4>[  496.138768] [S99qcloud] end
<4>[  496.201870] [S99qsyncman] start
<4>[  496.206846] [S99qsyncman] end
<4>[  496.270792] [S99sdmd.sh] start
<4>[  496.275402] [S99sdmd.sh] end
<4>[  496.315135] [S99sync_action.sh] start
<4>[  496.320160] [S99sync_action.sh] end
<4>[  496.391260] [S99z_antivirus] start
<4>[  496.396036] [S99z_antivirus] end
<4>[  512.693111] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  512.701029] NFSD: starting 90-second grace period
<4>[  610.909309] ====== 2020-04-28 08:24:15 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  625.592197] UBI: attaching mtd6 to ubi2
<5>[  625.596079] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  625.602519] UBI: logical eraseblock size:    126976 bytes
<5>[  625.607968] UBI: smallest flash I/O unit:    2048
<5>[  625.612697] UBI: VID header offset:          2048 (aligned 2048)
<5>[  625.618759] UBI: data offset:                4096
<5>[  625.767098] UBI: max. sequence number:       658
<5>[  625.782598] UBI: attached mtd6 to ubi2
<5>[  625.786404] UBI: MTD device name:            "config"
<5>[  625.791470] UBI: MTD device size:            15 MiB
<5>[  625.797246] UBI: number of good PEBs:        120
<5>[  625.801878] UBI: number of bad PEBs:         0
<5>[  625.806703] UBI: number of corrupted PEBs:   0
<5>[  625.811171] UBI: max. allowed volumes:       128
<5>[  625.815859] UBI: wear-leveling threshold:    4096
<5>[  625.820700] UBI: number of internal volumes: 1
<5>[  625.825175] UBI: number of user volumes:     1
<5>[  625.829683] UBI: available PEBs:             0
<5>[  625.835606] UBI: total number of reserved PEBs: 120
<5>[  625.842391] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  625.849389] UBI: max/mean erase counter: 7/6
<5>[  625.854431] UBI: image sequence number:  1872325126
<5>[  625.867926] UBI: background thread "ubi_bgt2d" started, PID 18568
<5>[  625.983500] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  625.989586] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  625.997210] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  626.004545] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  626.010415] UBIFS: default compressor: lzo
<5>[  626.014528] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  626.224247] UBIFS: un-mount UBI device 2, volume 0
<5>[  626.278699] UBI: mtd6 is detached from ubi2
<3>[ 2933.856023] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
<3>[ 2933.863312] ata2: irq_stat 0x00400000, PHY RDY changed
<3>[ 2933.868497] ata2: SError: { RecovComm PHYRdyChg 10B8B }
<6>[ 2933.873765] ata2: hard resetting link
<4>[ 2933.877472] Speed down due to signal issue.
<4>[ 2933.881674] Speed down due to signal issue.
<3>[ 2945.606272] ata2: softreset failed (device not ready)
<6>[ 2945.611346] ata2: hard resetting link
<4>[ 2945.615032] Speed down due to signal issue.
<3>[ 2957.706268] ata2: softreset failed (device not ready)
<6>[ 2957.711371] ata2: hard resetting link
<4>[ 2957.715049] Speed down due to signal issue.
<3>[ 2969.166289] ata2: softreset failed (device not ready)
<4>[ 2969.171365] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 2969.176553] ata2: hard resetting link
<4>[ 2969.180229] Speed down due to signal issue.
<4>[ 2969.184424] Speed down due to signal issue.
<3>[ 2979.276290] ata2: softreset failed (device not ready)
<3>[ 2979.281408] ata2: reset failed, giving up
<4>[ 2979.285431] ata2.00: disabled
<3>[ 2979.288454] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5050002 action 0xe frozen t4
<3>[ 2979.296209] ata2: irq_stat 0x00400040, connection status changed
<3>[ 2979.302279] ata2: SError: { RecovComm PHYRdyChg CommWake TrStaTrns DevExch }
<6>[ 2979.309394] ata2: hard resetting link
<3>[ 2979.313096] sd 1:0:0:0: rejecting I/O to offline device
<6>[ 2979.318340] sd 1:0:0:0: [sdb] killing request
<3>[ 2979.322763] sd 1:0:0:0: rejecting I/O to offline device
<4>[ 2979.328013] md: super_written gets error=-5, uptodate=0
<1>[ 2979.333266] md/raid1:md9: Disk failure on sdb1, disabling device.
<1>[ 2979.333270] md/raid1:md9: Operation continuing on 1 devices.
<3>[ 2979.355842] sd 1:0:0:0: rejecting I/O to offline device
<3>[ 2979.361107] md/raid1:md13: sdb4: rescheduling sector 618472
<3>[ 2979.367077] sd 1:0:0:0: rejecting I/O to offline device
<3>[ 2979.376527] sd 1:0:0:0: rejecting I/O to offline device
<3>[ 2979.381841] sd 1:0:0:0: rejecting I/O to offline device
<3>[ 2979.387197] md/raid1:md13: redirecting sector 618472 to other mirror: sda4
<3>[ 2979.394264] sd 1:0:0:0: rejecting I/O to offline device
<3>[ 2979.399526] end_request: I/O error, dev sdb, sector 11704316368
<4>[ 2979.405472] md: super_written gets error=-5, uptodate=0
<1>[ 2979.410724] md/raid1:md13: Disk failure on sdb4, disabling device.
<1>[ 2979.410728] md/raid1:md13: Operation continuing on 1 devices.
<7>[ 2979.531699] RAID1 conf printout:
<7>[ 2979.531713]  --- wd:1 rd:32
<7>[ 2979.531722]  disk 0, wo:0, o:1, dev:sda1
<7>[ 2979.531728]  disk 1, wo:1, o:0, dev:sdb1
<7>[ 2979.576279] RAID1 conf printout:
<7>[ 2979.576289]  --- wd:1 rd:32
<7>[ 2979.576297]  disk 0, wo:0, o:1, dev:sda1
<7>[ 2979.680258] RAID1 conf printout:
<7>[ 2979.680267]  --- wd:1 rd:32
<7>[ 2979.680275]  disk 0, wo:0, o:1, dev:sda4
<7>[ 2979.680281]  disk 1, wo:1, o:0, dev:sdb4
<7>[ 2979.726324] RAID1 conf printout:
<7>[ 2979.726336]  --- wd:1 rd:32
<7>[ 2979.726343]  disk 0, wo:0, o:1, dev:sda4
<6>[ 2983.096036] md: unbind<sdb1>
<6>[ 2983.126289] md: export_rdev(sdb1)
<6>[ 2985.106328] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 2985.111780] ata2: link online but 1 devices misclassified, retrying
<4>[ 2985.118117] ata2: reset failed (errno=-11), retrying in 5 secs
<6>[ 2985.239854] md: unbind<sdb4>
<6>[ 2985.296386] md: export_rdev(sdb4)
<6>[ 2989.306295] ata2: hard resetting link
<3>[ 3000.196261] ata2: softreset failed (device not ready)
<6>[ 3000.201348] ata2: hard resetting link
<3>[ 3011.456260] ata2: softreset failed (device not ready)
<4>[ 3011.461348] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 3011.466519] ata2: hard resetting link
<3>[ 3021.556269] ata2: softreset failed (device not ready)
<3>[ 3021.561384] ata2: reset failed, giving up
<3>[ 3021.565431] ata2: exception Emask 0x10 SAct 0x0 SErr 0x50d0002 action 0xe frozen t3
<3>[ 3021.573222] ata2: irq_stat 0x00400040, connection status changed
<3>[ 3021.579290] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B TrStaTrns DevExch }
<6>[ 3021.586928] ata2: hard resetting link
<4>[ 3021.590631] Speed down due to signal issue.
<3>[ 3032.436263] ata2: softreset failed (device not ready)
<6>[ 3032.441350] ata2: hard resetting link
<4>[ 3032.445043] Speed down due to signal issue.
<3>[ 3043.296259] ata2: softreset failed (device not ready)
<6>[ 3043.301339] ata2: hard resetting link
<4>[ 3043.305015] Speed down due to signal issue.
<3>[ 3054.156265] ata2: softreset failed (device not ready)
<4>[ 3054.161348] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3054.166520] ata2: hard resetting link
<4>[ 3054.170197] Speed down due to signal issue.
<4>[ 3054.174392] Speed down due to signal issue.
<3>[ 3064.246261] ata2: softreset failed (device not ready)
<3>[ 3064.251347] ata2: reset failed, giving up
<3>[ 3064.255398] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5050002 action 0xe frozen t2
<3>[ 3064.263093] ata2: irq_stat 0x00400040, connection status changed
<3>[ 3064.269140] ata2: SError: { RecovComm PHYRdyChg CommWake TrStaTrns DevExch }
<6>[ 3064.276222] ata2: hard resetting link
<3>[ 3075.126271] ata2: softreset failed (device not ready)
<6>[ 3075.131348] ata2: hard resetting link
<3>[ 3086.696276] ata2: softreset failed (device not ready)
<6>[ 3086.701355] ata2: hard resetting link
<3>[ 3097.546267] ata2: softreset failed (device not ready)
<4>[ 3097.551356] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 3097.556526] ata2: hard resetting link
<3>[ 3107.666260] ata2: softreset failed (device not ready)
<3>[ 3107.671348] ata2: reset failed, giving up
<3>[ 3107.675398] ata2: exception Emask 0x10 SAct 0x0 SErr 0x50d0002 action 0xe frozen t1
<3>[ 3107.683097] ata2: irq_stat 0x00400040, connection status changed
<3>[ 3107.689136] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B TrStaTrns DevExch }
<6>[ 3107.696750] ata2: hard resetting link
<4>[ 3107.700425] Speed down due to signal issue.
<6>[ 3114.006398] ata2: SATA link down (SStatus 0 SControl 320)
<4>[ 3114.011857] ata2: link online but 1 devices misclassified, retrying
<4>[ 3114.018187] ata2: reset failed (errno=-11), retrying in 4 secs
<6>[ 3117.696258] ata2: hard resetting link
<4>[ 3117.699939] Speed down due to signal issue.
<4>[ 3117.704133] Speed down due to signal issue.
<3>[ 3128.556259] ata2: softreset failed (device not ready)
<6>[ 3128.561339] ata2: hard resetting link
<4>[ 3128.565019] Speed down due to signal issue.
<3>[ 3139.456296] ata2: softreset failed (device not ready)
<4>[ 3139.461400] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3139.466596] ata2: hard resetting link
<4>[ 3139.470278] Speed down due to signal issue.
<4>[ 3139.474480] Speed down due to signal issue.
<3>[ 3149.546268] ata2: softreset failed (device not ready)
<3>[ 3149.551365] ata2: reset failed, giving up
<3>[ 3149.555409] ata2: EH pending after 5 tries, giving up
<6>[ 3149.560499] ata2: EH complete
<6>[ 3149.563524] ata2.00: detaching (SCSI 1:0:0:0)
<5>[ 3149.579568] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
<6>[ 3149.585231] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
<5>[ 3149.592987] sd 1:0:0:0: [sdb] Stopping disk
<4>[ 3149.607730] sd 1:0:0:0: [sdb] START_STOP FAILED
<6>[ 3149.612284] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
<3>[ 3150.415239] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10002 action 0xe frozen
<3>[ 3150.422548] ata2: irq_stat 0x00400000, PHY RDY changed
<3>[ 3150.427745] ata2: SError: { RecovComm PHYRdyChg }
<6>[ 3150.432483] ata2: hard resetting link
<4>[ 3150.907865] md: super_written gets error=-19, uptodate=0
<1>[ 3150.913212] md/raid1:md256: Disk failure on sdb2, disabling device.
<1>[ 3150.913216] md/raid1:md256: Operation continuing on 1 devices.
<7>[ 3151.045412] RAID1 conf printout:
<7>[ 3151.045424]  --- wd:1 rd:2
<7>[ 3151.045433]  disk 0, wo:0, o:1, dev:sda2
<7>[ 3151.045442]  disk 1, wo:1, o:0, dev:sdb2
<7>[ 3151.086258] RAID1 conf printout:
<7>[ 3151.086268]  --- wd:1 rd:2
<7>[ 3151.086276]  disk 0, wo:0, o:1, dev:sda2
<6>[ 3154.094909] md: unbind<sdb2>
<6>[ 3154.126289] md: export_rdev(sdb2)
<6>[ 3156.306282] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 3156.311715] ata2: link online but 1 devices misclassified, retrying
<4>[ 3156.318015] ata2: reset failed (errno=-11), retrying in 5 secs
<4>[ 3157.251355] md: cannot remove active disk sdb5 from md322 ...
<1>[ 3158.295258] md/raid1:md322: Disk failure on sdb5, disabling device.
<1>[ 3158.295263] md/raid1:md322: Operation continuing on 1 devices.
<7>[ 3158.368715] RAID1 conf printout:
<7>[ 3158.368727]  --- wd:1 rd:2
<7>[ 3158.368734]  disk 0, wo:0, o:1, dev:sda5
<7>[ 3158.368741]  disk 1, wo:1, o:0, dev:sdb5
<7>[ 3158.396281] RAID1 conf printout:
<7>[ 3158.396289]  --- wd:1 rd:2
<7>[ 3158.396297]  disk 0, wo:0, o:1, dev:sda5
<6>[ 3158.409203] md: unbind<sdb5>
<6>[ 3158.456291] md: export_rdev(sdb5)
<6>[ 3160.426273] ata2: hard resetting link
<4>[ 3160.590033] md: cannot remove active disk sdb3 from md1 ...
<1>[ 3161.633362] md/raid1:md1: Disk failure on sdb3, disabling device.
<1>[ 3161.633366] md/raid1:md1: Operation continuing on 1 devices.
<7>[ 3161.679744] RAID1 conf printout:
<7>[ 3161.679755]  --- wd:1 rd:2
<7>[ 3161.679763]  disk 0, wo:0, o:1, dev:sda3
<7>[ 3161.679769]  disk 1, wo:1, o:0, dev:sdb3
<7>[ 3161.736266] RAID1 conf printout:
<7>[ 3161.736275]  --- wd:1 rd:2
<7>[ 3161.736282]  disk 0, wo:0, o:1, dev:sda3
<6>[ 3161.749179] md: unbind<sdb3>
<6>[ 3161.786307] md: export_rdev(sdb3)
<6>[ 3166.506322] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 3166.511766] ata2: link online but 1 devices misclassified, retrying
<4>[ 3166.518101] ata2: reset failed (errno=-11), retrying in 4 secs
<6>[ 3170.426298] ata2: hard resetting link
<3>[ 3181.276273] ata2: softreset failed (device not ready)
<4>[ 3181.281348] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 3181.286527] ata2: hard resetting link
<3>[ 3191.356261] ata2: softreset failed (device not ready)
<3>[ 3191.361368] ata2: reset failed, giving up
<3>[ 3191.365410] ata2: exception Emask 0x10 SAct 0x0 SErr 0x50d0002 action 0xe frozen t4
<3>[ 3191.373120] ata2: irq_stat 0x00400040, connection status changed
<3>[ 3191.379158] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B TrStaTrns DevExch }
<6>[ 3191.386786] ata2: hard resetting link
<4>[ 3191.390461] Speed down due to signal issue.
<3>[ 3202.236272] ata2: softreset failed (device not ready)
<6>[ 3202.241368] ata2: hard resetting link
<4>[ 3202.245052] Speed down due to signal issue.
<3>[ 3213.096276] ata2: softreset failed (device not ready)
<6>[ 3213.101370] ata2: hard resetting link
<4>[ 3213.105047] Speed down due to signal issue.
<3>[ 3224.276262] ata2: softreset failed (device not ready)
<4>[ 3224.281337] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3224.286519] ata2: hard resetting link
<4>[ 3224.290197] Speed down due to signal issue.
<4>[ 3224.294397] Speed down due to signal issue.
<6>[ 3229.306298] ata2: SATA link down (SStatus 0 SControl 310)
<4>[ 3229.311733] ata2: link online but 1 devices misclassified, device detection might fail
<6>[ 3229.319716] ata2: EH complete
<3>[ 3229.468091] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
<3>[ 3229.475542] ata2: irq_stat 0x00000040, connection status changed
<3>[ 3229.481638] ata2: SError: { PHYRdyChg CommWake DevExch }
<6>[ 3229.487020] ata2: hard resetting link
<3>[ 3240.346261] ata2: softreset failed (device not ready)
<6>[ 3240.351349] ata2: hard resetting link
<3>[ 3251.196268] ata2: softreset failed (device not ready)
<6>[ 3251.201349] ata2: hard resetting link
<3>[ 3262.046272] ata2: softreset failed (device not ready)
<4>[ 3262.051348] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 3262.056535] ata2: hard resetting link
<6>[ 3267.106307] ata2: SATA link down (SStatus 0 SControl 320)
<4>[ 3267.111756] ata2: link online but 1 devices misclassified, device detection might fail
<6>[ 3267.119731] ata2: EH complete
<3>[ 3267.231288] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
<3>[ 3267.238741] ata2: irq_stat 0x00000040, connection status changed
<3>[ 3267.244775] ata2: SError: { PHYRdyChg CommWake DevExch }
<6>[ 3267.250129] ata2: hard resetting link
<3>[ 3278.096283] ata2: softreset failed (device not ready)
<6>[ 3278.101399] ata2: hard resetting link
<3>[ 3289.786288] ata2: softreset failed (device not ready)
<6>[ 3289.791370] ata2: hard resetting link
<3>[ 3300.956282] ata2: softreset failed (device not ready)
<4>[ 3300.961361] ata2: limiting SATA link speed to 3.0 Gbps
<6>[ 3300.966559] ata2: hard resetting link
<6>[ 3305.976352] ata2: SATA link down (SStatus 0 SControl 320)
<4>[ 3305.981803] ata2: link online but 1 devices misclassified, device detection might fail
<6>[ 3305.989793] ata2: EH complete
<3>[ 3306.034727] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
<3>[ 3306.042214] ata2: irq_stat 0x00000040, connection status changed
<3>[ 3306.048374] ata2: SError: { PHYRdyChg CommWake DevExch }
<6>[ 3306.053742] ata2: hard resetting link
<3>[ 3317.826296] ata2: softreset failed (device not ready)
<6>[ 3317.831391] ata2: hard resetting link
<3>[ 3330.226325] ata2: softreset failed (device not ready)
<6>[ 3330.231407] ata2: hard resetting link
<3>[ 3341.566322] ata2: softreset failed (device not ready)
<4>[ 3341.571413] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3341.576620] ata2: hard resetting link
<4>[ 3342.517676] nfsd: last server has exited, flushing export cache
<3>[ 3351.596278] ata2: softreset failed (device not ready)
<3>[ 3351.601399] ata2: reset failed, giving up
<3>[ 3351.605440] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5050002 action 0xe frozen t4
<3>[ 3351.613154] ata2: irq_stat 0x00400040, connection status changed
<3>[ 3351.619205] ata2: SError: { RecovComm PHYRdyChg CommWake TrStaTrns DevExch }
<6>[ 3351.626303] ata2: hard resetting link
<6>[ 3357.426275] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 3357.431699] ata2: link online but 1 devices misclassified, retrying
<4>[ 3357.438001] ata2: reset failed (errno=-11), retrying in 5 secs
<6>[ 3361.626276] ata2: hard resetting link
<6>[ 3368.056275] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 3368.061699] ata2: link online but 1 devices misclassified, retrying
<4>[ 3368.068003] ata2: reset failed (errno=-11), retrying in 4 secs
<6>[ 3371.626253] ata2: hard resetting link
<6>[ 3377.416814] ata2: SATA link down (SStatus 0 SControl 330)
<4>[ 3377.422246] ata2: link online but 1 devices misclassified, retrying
<4>[ 3377.428609] ata2: reset failed (errno=-11), retrying in 5 secs
<4>[ 3381.626272] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3381.631431] ata2: hard resetting link
<6>[ 3386.636296] ata2: SATA link down (SStatus 0 SControl 310)
<4>[ 3386.641722] ata2: link online but 1 devices misclassified, device detection might fail
<6>[ 3386.649726] ata2: EH complete
<3>[ 3386.817709] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
<3>[ 3386.825199] ata2: irq_stat 0x00000040, connection status changed
<3>[ 3386.831257] ata2: SError: { PHYRdyChg CommWake DevExch }
<6>[ 3386.836632] ata2: hard resetting link
<3>[ 3389.306294] ata2: COMRESET failed (errno=-32)
<4>[ 3389.310677] ata2: reset failed (errno=-32), retrying in 8 secs
<6>[ 3393.631439] ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>[ 3393.755832] eth0: pfe_eth_close
<6>[ 3393.786250] hif_lib_client_unregister : client: 9d0403a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[ 3393.795671] hif_process_client_req: unregister client_id 1
<6>[ 3393.801190] pfe_hif_client_unregister
<6>[ 3393.869884] eth1: pfe_eth_close
<6>[ 3393.906258] hif_lib_client_unregister : client: 9e0003a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[ 3393.915686] hif_process_client_req: unregister client_id 0
<6>[ 3393.921198] pfe_hif_client_unregister
<4>[ 3396.846282] ata2: limiting SATA link speed to 1.5 Gbps
<6>[ 3396.851454] ata2: hard resetting link
<6>[ 3403.326268] ata2: SATA link down (SStatus 0 SControl 310)
<3>[ 3403.326278] ata2: illegal qc_active transition (00000000->00000001)
<4>[ 3403.337998] ata2: link online but 1 devices misclassified, retrying
<4>[ 3403.344284] ata2: reset failed (errno=-11), retrying in 5 secs
<6>[ 3408.136256] ata2: hard resetting link
<5>[ 3410.032606] UBI: attaching mtd6 to ubi2
<5>[ 3410.036495] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[ 3410.042780] UBI: logical eraseblock size:    126976 bytes
<5>[ 3410.048207] UBI: smallest flash I/O unit:    2048
<5>[ 3410.052924] UBI: VID header offset:          2048 (aligned 2048)
<5>[ 3410.058954] UBI: data offset:                4096
<5>[ 3410.167367] UBI: max. sequence number:       659
<5>[ 3410.182719] UBI: attached mtd6 to ubi2
<5>[ 3410.186552] UBI: MTD device name:            "config"
<5>[ 3410.191635] UBI: MTD device size:            15 MiB
<5>[ 3410.196555] UBI: number of good PEBs:        120
<5>[ 3410.201185] UBI: number of bad PEBs:         0
<5>[ 3410.205651] UBI: number of corrupted PEBs:   0
<5>[ 3410.210132] UBI: max. allowed volumes:       128
<5>[ 3410.214775] UBI: wear-leveling threshold:    4096
<5>[ 3410.219521] UBI: number of internal volumes: 1
<5>[ 3410.223986] UBI: number of user volumes:     1
<5>[ 3410.228469] UBI: available PEBs:             0
<5>[ 3410.232937] UBI: total number of reserved PEBs: 120
<5>[ 3410.237852] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 3410.243884] UBI: max/mean erase counter: 7/6
<5>[ 3410.248188] UBI: image sequence number:  1872325126
<5>[ 3410.253115] UBI: background thread "ubi_bgt2d" started, PID 29221
<5>[ 3410.370299] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[ 3410.376354] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[ 3410.383947] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[ 3410.391286] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[ 3410.397142] UBIFS: default compressor: lzo
<5>[ 3410.401250] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[ 3410.809846] UBIFS: un-mount UBI device 2, volume 0
<5>[ 3410.886296] UBI: mtd6 is detached from ubi2
[Diagnostic] Tue Apr 28 09:37:32 CEST 2020, 663.84
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<5>[    0.000000] Linux version 3.2.26 (root@U16BuildServer47) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #2 SMP Fri Feb 14 05:25:24 CST 2020
<4>[    0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Comcerto 2000 EVM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[    0.000000] Comcerto: zone_dma mapping size=2c00000 type=b
<7>[    0.000000] On node 0 totalpages: 125952
<7>[    0.000000] free_area_init_node: node 0, pgdat 853f98c0, node_mem_map 85472000
<7>[    0.000000]   DMA zone: 110 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 11154 pages, LIFO batch:1
<7>[    0.000000]   Normal zone: 1170 pages used for memmap
<7>[    0.000000]   Normal zone: 113518 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @85976000 s5280 r8192 d15200 u32768
<7>[    0.000000] pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 124672
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram usb3_internal_clk=yes pcie_external_clk=yes mtdparts=comcertonand:32M(boot1_kernel),216M(boot1_rootfs2),32M(boot2_kernel),216M(boot2_rootfs2),15M(config);spi0.0:640K(loader)ro,-(env) mac_addr=00:08:9B:00:00:00,00:08:9B:00:00:01 pcie_gen1_only=no ip=none
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 44MB 448MB = 492MB total
<5>[    0.000000] Memory: 477280k/477280k available, 47008k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff30000 - 0xfffe0000   ( 704 kB)
<5>[    0.000000]     vmalloc : 0xa0800000 - 0xf0000000   (1272 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
<5>[    0.000000]     modules : 0x83600000 - 0x84000000   (  10 MB)
<5>[    0.000000]       .text : 0x84008000 - 0x8469aaf8   (6731 kB)
<5>[    0.000000]       .init : 0x8469b000 - 0x853c44a0   (13478 kB)
<5>[    0.000000]       .data : 0x853c6000 - 0x853fede0   ( 228 kB)
<5>[    0.000000]        .bss : 0x853fee04 - 0x85471640   ( 459 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:256
<6>[    0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz
<6>[    0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms
<6>[    0.000183] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
<6>[    0.060029] pid_max: default: 32768 minimum: 301
<6>[    0.060215] Mount-cache hash table entries: 512
<6>[    0.060717] Initializing cgroup subsys cpuacct
<6>[    0.060747] Initializing cgroup subsys devices
<6>[    0.060780] CPU: Testing write buffer coherency: ok
<6>[    0.060942] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
<6>[    0.060968] Calibrating local timer... 299.86MHz.
<4>[    0.120064]  Creating cpu1_hotplug_thread....
<4>[    0.120153]  cpu1_hotplug_thread Created
<6>[    0.120169] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[    0.121567] CPU1: Booted secondary processor
<6>[    0.180039] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
<6>[    0.180092] Brought up 2 CPUs
<6>[    0.180105] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
<6>[    0.180787] devtmpfs: initialized
<6>[    0.182194] xor: measuring software checksum speed
<6>[    0.229988]    arm4regs  :  2129.200 MB/sec
<6>[    0.279961]    8regs     :  1438.000 MB/sec
<6>[    0.329938]    32regs    :  1409.600 MB/sec
<6>[    0.329946] xor: using function: arm4regs (2129.200 MB/sec)
<6>[    0.330149] NET: Registered protocol family 16
<6>[    0.330633] L310 cache controller enabled
<6>[    0.330645] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B
<6>[    0.330724] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330728] ARMv7 AUX CTRL(1): 0x41
<6>[    0.330743] ARMv7 AUX CTRL(0): 0x41
<6>[    0.330750] ARMv7 AUX CTRL(0): 0x41
<6>[    0.331251] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.331260] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.331275] Power Management Mode Support For C2000: 
<6>[    0.331584] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6
<6>[    0.346901] PCIe0: Link Up Success 
<6>[    0.346908] PCIe0: Polarity: 0 Gen1 mode: 0 External Clk: 1
<6>[    0.346913] comcerto_pcie_rc_int_init
<6>[    0.346955] PCIe: Detected C2K RevA1 device serdes clk devider old:new=6:6
<6>[    4.338118] PCIe1: Link Up Failed 
<7>[    4.338260] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106
<7>[    4.338320] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff]
<7>[    4.338335] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<6>[    4.338455] PCI: bus0: Fast back to back transfers disabled
<6>[    4.338553] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
<6>[    4.338563] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff]
<6>[    4.338576] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff])
<6>[    4.350000] bio: create slab <bio-0> at 0
<4>[    4.519589] raid6: int32x1     25 MB/s
<4>[    4.689230] raid6: int32x2     48 MB/s
<4>[    4.858604] raid6: int32x4     82 MB/s
<4>[    5.027839] raid6: int32x8    112 MB/s
<4>[    5.027845] raid6: using algorithm int32x8 (112 MB/s)
<6>[    5.028039] vgaarb: loaded
<5>[    5.028346] SCSI subsystem initialized
<7>[    5.028477] libata version 3.00 loaded.
<6>[    5.028638] usbcore: registered new interface driver usbfs
<6>[    5.028716] usbcore: registered new interface driver hub
<6>[    5.028802] usbcore: registered new device driver usb
<6>[    5.029028] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    5.029450] cfg80211: Calling CRDA to update world regulatory domain
<6>[    5.029831] Switching to clocksource timer2
<5>[    5.030063] FS-Cache: Loaded
<6>[    5.030187] CacheFiles: Loaded
<6>[    5.031064] NET: Registered protocol family 2
<6>[    5.031261] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.031917] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032099] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.032257] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.032264] TCP reno registered
<6>[    5.032272] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032302] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    5.032544] NET: Registered protocol family 1
<6>[    5.032834] RPC: Registered named UNIX socket transport module.
<6>[    5.032842] RPC: Registered udp transport module.
<6>[    5.032847] RPC: Registered tcp transport module.
<6>[    5.032852] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    5.032874] PCI: CLS 32 bytes, default 32
<6>[    6.071378] membuf_init: created membuf device(253, 0)
<6>[    6.071670] audit: initializing netlink socket (disabled)
<5>[    6.071693] type=2000 audit(6.070:1): initialized
<5>[    6.072676] VFS: Disk quotas dquot_6.5.2
<4>[    6.072818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    6.073443] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.073698] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    6.074389] fuse init (API version 7.17)
<6>[    6.074578] msgmni has been set to 932
<6>[    6.076267] async_tx: api initialized (async)
<6>[    6.076386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    6.076396] io scheduler noop registered
<6>[    6.076401] io scheduler deadline registered
<6>[    6.076482] io scheduler cfq registered (default)
<6>[    6.076781] comcerto_dma_probe: XOR DMA channel registered
<6>[    6.077126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    6.304515] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A
<6>[    6.955089] console [ttyS0] enabled
<6>[    7.064500] serial8250.0: ttyS1 at MMIO 0x96300000 (irq = 58) is a 16550A
<6>[    7.111234] brd: module loaded
<6>[    7.200262] loop: module loaded
<6>[    7.204799] nbd: registered device at major 43
<6>[    7.214524] SCSI Media Changer driver v0.25 
<7>[    7.218910] ahci 0000:00:00.0: version 3.0
<4>[    7.218928] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
<6>[    7.224686] ahci 0000:00:00.0: controller can't do 64bit DMA, forcing 32bit
<6>[    7.231716] ahci: SSS flag set, parallel bus scan disabled
<6>[    7.237252] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    7.245379] ahci 0000:00:00.0: flags: ncq sntf stag led clo pmp pio slum part ccc sxs 
<6>[    7.254443] scsi0 : ahci
<6>[    7.257357] scsi1 : ahci
<6>[    7.260084] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96
<6>[    7.267418] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96
<6>[    7.274886] SATA Serdes: 48Mhz ref clk
<6>[    7.279131] Serdes2: Lane OK Passed
<4>[    7.282646] ahci ahci: forcing PORTS_IMPL to 0x3
<6>[    7.287332] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode
<6>[    7.295109] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
<6>[    7.303684] scsi2 : ahci_platform
<6>[    7.307218] scsi3 : ahci_platform
<6>[    7.310708] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48
<6>[    7.318649] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48
<4>[    7.327521] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz
<6>[    7.336884] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xA0810000, irq=61
<6>[    7.344780] Fixed MDIO Bus: probed
<6>[    7.348243] dwc_otg: version 2.94a 27-OCT-2011
<4>[    7.552436] Core Release: 2.81a
<4>[    7.555587] Setting default values for core params
<6>[    7.669873] ata4: SATA link down (SStatus 0 SControl 330)
<6>[    7.675328] ata3: SATA link down (SStatus 0 SControl 330)
<4>[    7.760169] Using Buffer DMA mode
<4>[    7.763493] Periodic Transfer Interrupt Enhancement - disabled
<4>[    7.769340] Multiprocessor Interrupt Enhancement - disabled
<4>[    7.774932] OTG VER PARAM: 0, OTG VER FLAG: 0
<6>[    7.779332] dwc_otg dwc_otg.0: DWC OTG Controller
<7>[    7.784135] drivers/usb/core/inode.c: creating file 'devices'
<7>[    7.784149] drivers/usb/core/inode.c: creating file '001'
<6>[    7.784161] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
<6>[    7.791257] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000
<4>[    7.796646] Init: Port Power? op_state=1
<4>[    7.800585] Init: Power Port (0)
<7>[    7.803855] usb usb1: default language 0x0409
<7>[    7.803873] usb usb1: udev 1, busnum 1, minor = 0
<6>[    7.803880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    7.810699] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    7.817941] usb usb1: Product: DWC OTG Controller
<6>[    7.819882] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    7.828871] usb usb1: Manufacturer: Linux 3.2.26 dwc_otg
<6>[    7.834216] usb usb1: SerialNumber: dwc_otg.0
<6>[    7.838604] ata1.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    7.845428] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<7>[    7.853014] usb usb1: usb_probe_device
<7>[    7.853024] usb usb1: configuration #1 chosen from 1 choice
<7>[    7.853048] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[    7.853136] hub 1-0:1.0: usb_probe_interface
<7>[    7.853142] hub 1-0:1.0: usb_probe_interface - got id
<6>[    7.853149] hub 1-0:1.0: USB hub found
<6>[    7.853376] ata1.00: configured for UDMA/133
<6>[    7.861219] hub 1-0:1.0: 1 port detected
<7>[    7.865153] hub 1-0:1.0: standalone hub
<7>[    7.865158] hub 1-0:1.0: ganged power switching
<7>[    7.865164] hub 1-0:1.0: individual port over-current protection
<7>[    7.865170] hub 1-0:1.0: Single TT
<7>[    7.865176] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    7.865183] hub 1-0:1.0: power on to power good time: 2ms
<7>[    7.865196] hub 1-0:1.0: local power source is good
<7>[    7.865203] hub 1-0:1.0: enabling power on all ports
<7>[    7.865592] drivers/usb/core/inode.c: creating file '001'
<5>[    7.865691] scsi 0:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<7>[    7.865720] Module dwc_common_port init
<6>[    7.873827] ata1.00: set queue depth = 31
<4>[    7.878021] Check proc_name[ahci].
<5>[    7.881734] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    7.881775] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    7.882000] mousedev: PS/2 mouse device common for all mice
<6>[    7.882202] i2c /dev entries driver
<4>[    7.882297] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f
<6>[    7.882628] comcerto_wdt: support registered
<6>[    7.882661] md: linear personality registered for level -1
<6>[    7.882666] md: raid0 personality registered for level 0
<6>[    7.882671] md: raid1 personality registered for level 1
<6>[    7.882676] md: raid10 personality registered for level 10
<6>[    7.882681] md: raid6 personality registered for level 6
<6>[    7.882685] md: raid5 personality registered for level 5
<6>[    7.882690] md: raid4 personality registered for level 4
<6>[    7.882695] md: multipath personality registered for level -4
<5>[    7.959115] sd 0:0:0:0: [sda] 4096-byte physical blocks
<4>[    7.964509] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    7.964513] 
<6>[    7.964630] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<4>[    7.981440] dm_crypt using the OCF for crypto acceleration.
<7>[    7.981479] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<5>[    7.981677] sd 0:0:0:0: [sda] Write Protect is off
<7>[    7.981685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    7.981751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.001243] device-mapper: multipath: version 1.3.0 loaded
<6>[    8.006749] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[    8.013318] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[    8.019959] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[    8.030917] ALSA device list:
<6>[    8.033897]   No soundcards found.
<6>[    8.037951] TCP cubic registered
<6>[    8.041218] NET: Registered protocol family 17
<6>[    8.045700] NET: Registered protocol family 15
<7>[    8.049886] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<4>[    8.049900] WARN::dwc_otg_hcd_hub_control:2212: Overcurrent change detected
<4>[    8.049903] 
<7>[    8.049912] hub 1-0:1.0: over-current change on port 1
<6>[    8.058632] Initializing NETLINK_KEY socket
<6>[    8.062912] NET: Registered protocol family 5
<6>[    8.067377] lib80211: common routines for IEEE802.11 drivers
<7>[    8.073113] lib80211_crypt: registered algorithm 'NULL'
<5>[    8.073121] Registering the dns_resolver key type
<6>[    8.077898] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<6>[    8.085678] Clocks: disabled unused pll2
<6>[    8.085909]  sda: sda1 sda2 sda3 sda4 sda5
<6>[    8.093731] Clocks: disabled unused uart
<5>[    8.094417] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    8.102298] Clocks: disabled unused gemtx
<6>[    8.106319] Clocks: disabled unused ipsec_spacc
<6>[    8.110868] Clocks: disabled unused dpi_cie
<6>[    8.115061] Clocks: disabled unused dpi_decomp
<6>[    8.119516] Clocks: disabled unused ntgref
<6>[    8.123627] Clocks: disabled unused pcie1
<6>[    8.127646] Clocks: disabled unused usb1
<6>[    8.131584] Clocks: disabled unused ext_phy0
<6>[    8.135864] Clocks: disabled unused ext_phy1
<6>[    8.140148] Clocks: disabled unused ext_phy2
<6>[    8.144428] Clocks: disabled unused tpi
<6>[    8.148272] Clocks: disabled unused csys
<6>[    8.152209] Clocks: disabled unused tsuntg
<6>[    8.156316] Clocks: disabled unused sata_occ
<7>[    8.159866] hub 1-0:1.0: enabling power on all ports
<6>[    8.160601] Clocks: disabled unused pcie_occ
<6>[    8.164881] Clocks: disabled unused sgmii_occ
<4>[    8.361759] Registering CPUFreq(comcerto)
<4>[    8.366067] Please be patient, while OpenWrt loads ...
<6>[    8.509891] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    8.516708] ata2.00: ATA-10: WDC WD60EFAX-68SHWN0, 82.00A82, max UDMA/133
<6>[    8.523529] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    8.531432] ata2.00: configured for UDMA/133
<5>[    8.536094] scsi 1:0:0:0: Direct-Access     WDC      WD60EFAX-68SHWN0 82.0 PQ: 0 ANSI: 5
<6>[    8.544239] ata2.00: set queue depth = 31
<4>[    8.548454] Check proc_name[ahci].
<5>[    8.552103] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
<5>[    8.552217] sd 1:0:0:0: Attached scsi generic sg1 type 0
<5>[    8.565292] sd 1:0:0:0: [sdb] 4096-byte physical blocks
<5>[    8.570788] sd 1:0:0:0: [sdb] Write Protect is off
<7>[    8.575595] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    8.575667] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.626142]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
<5>[    8.631543] sd 1:0:0:0: [sdb] Attached SCSI disk
<6>[    8.653722] Freeing init memory: 13476K
<6>[    9.166384] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
<6>[    9.173135] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
<4>[    9.432631] RTC_TIME:Tue Apr 28 09:26:37 2020  0.000000 seconds
<6>[    9.459925] m25p80 spi0.0: en25q80 (1024 Kbytes)
<5>[    9.464578] 2 cmdlinepart partitions found on MTD device spi0.0
<5>[    9.470564] Creating 2 MTD partitions on "spi0.0":
<5>[    9.475371] 0x000000000000-0x0000000a0000 : "loader"
<5>[    9.481140] 0x0000000a0000-0x000000100000 : "env"
<6>[    9.491500] pdev->resource->start = c8300000, pdev->resource->end = c8301fff
<6>[    9.498590] nand_probe: comcertonand base: 0xa0854000 
<6>[    9.503783] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
<3>[    9.512425] Using default values for hw ecc
<4>[    9.520036] Bad block table not found for chip 0
<4>[    9.528036] Bad block table not found for chip 0
<6>[    9.532671] Scanning device for bad blocks
<4>[    9.537816] Bad eraseblock 18 at 0x000000240000
<4>[    9.545304] Bad eraseblock 72 at 0x000000900000
<4>[    9.564978] Bad eraseblock 350 at 0x000002bc0000
<4>[    9.571294] Bad eraseblock 381 at 0x000002fa0000
<4>[    9.602151] Bad eraseblock 863 at 0x000006be0000
<4>[    9.627776] Bad eraseblock 1249 at 0x000009c20000
<4>[    9.647515] Bad eraseblock 1525 at 0x00000bea0000
<6>[    9.795283] Bad block table written to 0x00001ffe0000, version 0x01
<6>[    9.804803] Bad block table written to 0x00001ffc0000, version 0x01
<5>[    9.811117] 5 cmdlinepart partitions found on MTD device comcertonand
<5>[    9.817576] Creating 5 MTD partitions on "comcertonand":
<5>[    9.822912] 0x000000000000-0x000002000000 : "boot1_kernel"
<5>[    9.829202] 0x000002000000-0x00000f800000 : "boot1_rootfs2"
<5>[    9.835591] 0x00000f800000-0x000011800000 : "boot2_kernel"
<5>[    9.841782] 0x000011800000-0x00001f000000 : "boot2_rootfs2"
<5>[    9.848113] 0x00001f000000-0x00001ff00000 : "config"
<6>[    9.861131] usbcore: registered new interface driver usbhid
<6>[    9.866722] usbhid: USB HID core driver
<6>[    9.876227] usbcore: registered new interface driver usblp
<6>[    9.888802] ## xhci_plat_probe
<6>[    9.891909] ### comcerto_start_xhci
<6>[    9.895417] USB3.0 clock selected: internal
<6>[    9.902862] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.907771] drivers/usb/core/inode.c: creating file '002'
<6>[    9.907792] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
<6>[    9.915015] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000
<7>[    9.920390] usb usb2: default language 0x0409
<7>[    9.920408] usb usb2: udev 1, busnum 2, minor = 128
<6>[    9.920415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    9.927222] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.934472] usb usb2: Product: xHCI Host Controller
<6>[    9.939361] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.944779] usb usb2: SerialNumber: xhci-hcd
<7>[    9.949315] usb usb2: usb_probe_device
<7>[    9.949325] usb usb2: configuration #1 chosen from 1 choice
<7>[    9.949336] xHCI xhci_add_endpoint called for root hub
<7>[    9.949343] xHCI xhci_check_bandwidth called for root hub
<7>[    9.949364] usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>[    9.949453] hub 2-0:1.0: usb_probe_interface
<7>[    9.949460] hub 2-0:1.0: usb_probe_interface - got id
<6>[    9.949466] hub 2-0:1.0: USB hub found
<6>[    9.953257] hub 2-0:1.0: 1 port detected
<7>[    9.957190] hub 2-0:1.0: standalone hub
<7>[    9.957195] hub 2-0:1.0: no power switching (usb 1.0)
<7>[    9.957201] hub 2-0:1.0: individual port over-current protection
<7>[    9.957207] hub 2-0:1.0: Single TT
<7>[    9.957213] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[    9.957220] hub 2-0:1.0: power on to power good time: 20ms
<7>[    9.957235] hub 2-0:1.0: local power source is good
<7>[    9.957241] hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>[    9.957389] drivers/usb/core/inode.c: creating file '001'
<6>[    9.957456] xhci-hcd xhci-hcd: xHCI Host Controller
<7>[    9.962382] drivers/usb/core/inode.c: creating file '003'
<6>[    9.962398] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
<7>[    9.969496] usb usb3: skipped 1 descriptor after endpoint
<7>[    9.969507] usb usb3: default language 0x0409
<7>[    9.969524] usb usb3: udev 1, busnum 3, minor = 256
<6>[    9.969531] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
<6>[    9.976356] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    9.983609] usb usb3: Product: xHCI Host Controller
<6>[    9.988500] usb usb3: Manufacturer: Linux 3.2.26 xhci-hcd
<6>[    9.993918] usb usb3: SerialNumber: xhci-hcd
<7>[    9.998427] usb usb3: usb_probe_device
<7>[    9.998435] usb usb3: configuration #1 chosen from 1 choice
<7>[    9.998444] xHCI xhci_add_endpoint called for root hub
<7>[    9.998451] xHCI xhci_check_bandwidth called for root hub
<7>[    9.998468] usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>[    9.998554] hub 3-0:1.0: usb_probe_interface
<7>[    9.998561] hub 3-0:1.0: usb_probe_interface - got id
<6>[    9.998567] hub 3-0:1.0: USB hub found
<6>[   10.002349] hub 3-0:1.0: 1 port detected
<7>[   10.006283] hub 3-0:1.0: standalone hub
<7>[   10.006288] hub 3-0:1.0: no power switching (usb 1.0)
<7>[   10.006294] hub 3-0:1.0: individual port over-current protection
<7>[   10.006301] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.006309] hub 3-0:1.0: power on to power good time: 20ms
<7>[   10.006321] hub 3-0:1.0: local power source is good
<7>[   10.006328] hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>[   10.006472] drivers/usb/core/inode.c: creating file '001'
<6>[   10.013933] Initializing USB Mass Storage driver...
<6>[   10.018935] usbcore: registered new interface driver usb-storage
<6>[   10.024981] USB Mass Storage support registered.
<7>[   10.049908] hub 2-0:1.0: port 1: status 0101 change 0001
<7>[   10.099940] hub 3-0:1.0: port 1: status 0203 change 0001
<7>[   10.149932] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.149964] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[   10.269918] usb 2-1: new high-speed USB device number 2 using xhci-hcd
<7>[   10.292068] usb 2-1: default language 0x0409
<7>[   10.292609] usb 2-1: udev 2, busnum 2, minor = 129
<6>[   10.292620] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[   10.299351] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.306546] usb 2-1: Product: USB2.0 Hub
<6>[   10.310515] usb 2-1: Manufacturer: GenesysLogic
<7>[   10.315425] usb 2-1: usb_probe_device
<7>[   10.315438] usb 2-1: configuration #1 chosen from 1 choice
<7>[   10.321510] usb 2-1: Successful Endpoint Configure command
<7>[   10.321736] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>[   10.321875] hub 2-1:1.0: usb_probe_interface
<7>[   10.321885] hub 2-1:1.0: usb_probe_interface - got id
<6>[   10.321892] hub 2-1:1.0: USB hub found
<6>[   10.327068] hub 2-1:1.0: 4 ports detected
<7>[   10.331151] hub 2-1:1.0: standalone hub
<7>[   10.331159] hub 2-1:1.0: individual port power switching
<7>[   10.331165] hub 2-1:1.0: individual port over-current protection
<7>[   10.353546] usb 2-1: Successful Endpoint Configure command
<7>[   10.353888] hub 2-1:1.0: TT per port
<7>[   10.353899] hub 2-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[   10.353906] hub 2-1:1.0: Port indicators are supported
<7>[   10.353912] hub 2-1:1.0: power on to power good time: 100ms
<7>[   10.354179] usb 2-1: Successful Endpoint Configure command
<7>[   10.354353] hub 2-1:1.0: local power source is good
<7>[   10.354365] hub 2-1:1.0: enabling power on all ports
<7>[   10.355259] drivers/usb/core/inode.c: creating file '002'
<7>[   10.355338] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[   10.355360] hub 3-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
<4>[   10.406225] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine 
<4>[   10.412652] m86xxx_elp: Registering  key des/3des aes rc4 md5 sha1 sha256 null
<4>[   10.454215] flashcache: flashcache-1.0-dummy initialized
<6>[   10.470032] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
<7>[   10.491802] usb 3-1: skipped 1 descriptor after endpoint
<7>[   10.491976] usb 3-1: default language 0x0409
<7>[   10.492507] usb 3-1: udev 2, busnum 3, minor = 257
<6>[   10.492515] usb 3-1: New USB device found, idVendor=05e3, idProduct=0617
<6>[   10.499244] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   10.506428] usb 3-1: Product: USB3.0 Hub
<6>[   10.510379] usb 3-1: Manufacturer: GenesysLogic
<7>[   10.515210] usb 3-1: usb_probe_device
<7>[   10.515221] usb 3-1: configuration #1 chosen from 1 choice
<7>[   10.529487] usb 3-1: Successful Endpoint Configure command
<7>[   10.529659] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
<7>[   10.530055] hub 3-1:1.0: usb_probe_interface
<7>[   10.530065] hub 3-1:1.0: usb_probe_interface - got id
<6>[   10.530072] hub 3-1:1.0: USB hub found
<6>[   10.534117] hub 3-1:1.0: 4 ports detected
<7>[   10.538144] hub 3-1:1.0: standalone hub
<7>[   10.538150] hub 3-1:1.0: individual port power switching
<7>[   10.538156] hub 3-1:1.0: individual port over-current protection
<7>[   10.538165] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[   10.538173] hub 3-1:1.0: power on to power good time: 100ms
<7>[   10.538353] usb 3-1: Successful Endpoint Configure command
<7>[   10.538496] hub 3-1:1.0: local power source is good
<7>[   10.538610] hub 3-1:1.0: enabling power on all ports
<7>[   10.539346] drivers/usb/core/inode.c: creating file '002'
<7>[   10.539421] hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   10.623391] UBI: attaching mtd3 to ubi0
<5>[   10.627244] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<7>[   10.630593] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0000
<5>[   10.633547] UBI: logical eraseblock size:    126976 bytes
<5>[   10.638959] UBI: smallest flash I/O unit:    2048
<5>[   10.643682] UBI: VID header offset:          2048 (aligned 2048)
<5>[   10.649703] UBI: data offset:                4096
<5>[   12.130219] UBI: max. sequence number:       2
<5>[   12.147057] UBI: attached mtd3 to ubi0
<5>[   12.150852] UBI: MTD device name:            "boot1_rootfs2"
<5>[   12.156526] UBI: MTD device size:            216 MiB
<5>[   12.161511] UBI: number of good PEBs:        1723
<5>[   12.166226] UBI: number of bad PEBs:         5
<5>[   12.170685] UBI: number of corrupted PEBs:   0
<5>[   12.175139] UBI: max. allowed volumes:       128
<5>[   12.179767] UBI: wear-leveling threshold:    4096
<5>[   12.184486] UBI: number of internal volumes: 1
<5>[   12.188941] UBI: number of user volumes:     1
<5>[   12.193399] UBI: available PEBs:             0
<5>[   12.197854] UBI: total number of reserved PEBs: 1723
<5>[   12.202835] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   12.208944] UBI: max/mean erase counter: 25/16
<5>[   12.213402] UBI: image sequence number:  1486693232
<5>[   12.218306] UBI: background thread "ubi_bgt0d" started, PID 392
<5>[   12.334624] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   12.340751] UBIFS: mounted read-only
<5>[   12.344337] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   12.352375] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   12.359705] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   12.365559] UBIFS: default compressor: lzo
<5>[   12.369666] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[   33.940119] UBIFS: un-mount UBI device 0, volume 0
<5>[   33.978953] UBI: mtd3 is detached from ubi0
<6>[   33.991993] usbcore: registered new interface driver usbserial
<6>[   33.997845] usbserial: USB Serial Driver core
<6>[   34.007760] USB Serial support registered for pl2303
<6>[   34.012843] usbcore: registered new interface driver pl2303
<6>[   34.018430] pl2303: Prolific PL2303 USB to serial adaptor driver
<5>[   34.030313] jnl: driver (UFSD_HEAD UFSD_HEAD_r314144_b731) loaded at 836c0000
<4>[   34.044030] ufsd: module license 'Commercial product' taints kernel.
<4>[   34.050434] Disabling lock debugging due to kernel taint
<5>[   34.076923] ufsd: driver (UFSD_HEAD UFSD_HEAD_r314144_b731, acl, ioctl, sd2(5), rsrc, car) loaded at 836cf000
<5>[   34.076928] NTFSJ support included
<5>[   34.076931] exFAT support included
<5>[   34.076933] Hfs+J support included
<5>[   34.076935] Build_for__QNAP_TS-231_k3.2.26_2014-12-22_UFSD_HEAD_r314144_b731
<5>[   34.104176] ufsd: PAGE_SIZE=4K, THREAD_SIZE=8k
<5>[   34.108632] ufsd: Kernel .config hash: original 0xe4a2da07, current can't check.
<4>[   34.379715] udevd (417): /proc/417/oom_adj is deprecated, please use /proc/417/oom_score_adj instead.
<6>[   34.389080] udev: starting version 140
<6>[   34.395917] pfe_module_init
<6>[   34.398769] pfe_platform_probe
<6>[   34.402882] ipsec: baseaddr :9a000000 --- a0c00000
<6>[   34.408695] pfe_probe
<6>[   34.410985] PFE Driver version:
<6>[   34.410988] pfe_ctrl_10_00_4
<6>[   34.410990] built with pfe sources version: pfe_10_00_3
<6>[   34.422260] cbus_baseaddr: a5000000, ddr_baseaddr: a4000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000
<6>[   34.431861] pfe_hw_init
<6>[   34.434312] CLASS version: 20
<6>[   34.437286] TMU version: 1011231
<6>[   34.440524] BMU1 version: 21
<6>[   34.443410] BMU2 version: 21
<6>[   34.446297] EMAC1 network cfg: 80000
<6>[   34.449883] EMAC2 network cfg: 80000
<6>[   34.453466] EMAC3 network cfg: 80000
<6>[   34.457048] EGPI1 version: 50
<6>[   34.460026] EGPI2 version: 50
<6>[   34.463000] EGPI3 version: 50
<6>[   34.465974] HGPI version: 50
<6>[   34.468860] GPT version: 0
<6>[   34.471577] HIF version: 10
<6>[   34.474376] HIF NOPCY version: 10
<6>[   34.477698] UTIL version: 20
<6>[   34.480589] bmu_init(1) done
<6>[   34.483476] bmu_init(2) done
<6>[   34.492821] class_init() done
<6>[   34.495800] tmu_init: mem init
<6>[   34.498861] tmu_init: lmem init
<6>[   34.502057] tmu_init() done
<6>[   34.504857] util_init() done
<6>[   34.507745] gpi_init(1) done
<6>[   34.510638] gpi_init(2) done
<6>[   34.513526] gpi_init(3) done
<6>[   34.516414] gpi_init(hif) done
<6>[   34.519474] bmu_enable(1) done
<6>[   34.522539] bmu_enable(2) done
<6>[   34.525600] pfe_hif_lib_init
<6>[   34.528660] pfe_hif_init
<6>[   34.531207] pfe_hif_alloc_descr
<6>[   34.534452] pfe_hif_init_buffers
<6>[   34.537810] pfe_firmware_init
<6>[   34.700681] pfe_load_elf
<3>[   34.703235] pe_load_ddr_section: load address(3fb0000) and elf file address(a0b7c000) rcvd
<6>[   34.734766] PFE binary version: pfe_10_00_3
<6>[   34.738967] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000
<6>[   34.745436] pfe_load_elf
<6>[   34.749350] pfe_firmware_init: tmu firmware loaded 0x220
<6>[   34.754683] pfe_load_elf
<6>[   34.759004] pfe_firmware_init: util firmware loaded 0x16e0
<6>[   34.764551] pfe_ctrl_init
<6>[   34.785299] pfe_ctrl_init finished
<6>[   34.785305] pfe_ctrl_timer
<6>[   34.791439] pfe_eth_init
<6>[   34.802879] Comcerto MDIO Bus: probed
<6>[   34.807888] eth0: pfe_eth_init_one: created interface, baseaddr: a5200000
<6>[   34.816456] eth1: pfe_eth_init_one: created interface, baseaddr: a5220000
<6>[   34.823323] pfe_vwd_init
<6>[   34.826057] pfe_vwd_init: created vwd device(251, 0)
<4>[   34.831069] pfe_vwd_driver_init: start
<4>[   34.834835] pfe_vwd_up: start
<6>[   34.837867] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered
<4>[   34.844967] pfe_vwd_driver_init: end
<6>[   34.848559] pfe_pcap_init
<6>[   34.900081] eth0: pfe_eth_open
<6>[   34.903402] hif_process_client_req: register client_id 0
<6>[   34.908733] pfe_hif_client_register
<6>[   34.912282] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[   34.920602] eth0: pfe_gemac_init
<6>[   34.940133] eth0: pfe_eth_close
<6>[   34.979901] hif_lib_client_unregister : client: 9d0403a4, client_id: 0, txQ_depth: 1024, rxQ_depth: 256
<6>[   34.989322] hif_process_client_req: unregister client_id 0
<6>[   34.994828] pfe_hif_client_unregister
<6>[   34.998949] eth1: pfe_eth_open
<6>[   35.002149] hif_process_client_req: register client_id 1
<6>[   35.007475] pfe_hif_client_register
<6>[   35.010984] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[   35.019274] eth1: pfe_gemac_init
<6>[   35.023161] eth1: pfe_eth_close
<6>[   35.059869] hif_lib_client_unregister : client: 9fac03a4, client_id: 1, txQ_depth: 1024, rxQ_depth: 256
<6>[   35.069290] hif_process_client_req: unregister client_id 1
<6>[   35.074798] pfe_hif_client_unregister
<6>[   35.498888] kjournald starting.  Commit interval 5 seconds
<6>[   35.504446] EXT3-fs (sda1): using internal journal
<6>[   35.509257] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   35.907603] kjournald starting.  Commit interval 5 seconds
<6>[   35.913157] EXT3-fs (sda1): using internal journal
<6>[   35.917968] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   36.821897] kjournald starting.  Commit interval 5 seconds
<6>[   36.827428] EXT3-fs (sdb1): using internal journal
<6>[   36.832250] EXT3-fs (sdb1): recovery complete
<6>[   36.843483] EXT3-fs (sdb1): mounted filesystem with writeback data mode
<6>[   37.166671] md: md9 stopped.
<6>[   37.172083] md: bind<sdb1>
<6>[   37.175113] md: bind<sda1>
<4>[   37.177892] md: kicking non-fresh sdb1 from array!
<6>[   37.182752] md: unbind<sdb1>
<6>[   37.199902] md: export_rdev(sdb1)
<6>[   37.206226] bio: create slab <bio-1> at 1
<6>[   37.210458] md/raid1:md9: active with 1 out of 32 mirrors
<6>[   37.216029] created bitmap (1 pages) for device md9
<6>[   37.221107] md9: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   37.242592] md9: detected capacity change from 0 to 542769152
<6>[   37.281062]  md9: unknown partition table
<6>[   37.290318] md: bind<sdb1>
<7>[   37.320565] RAID1 conf printout:
<7>[   37.320574]  --- wd:1 rd:32
<7>[   37.320582]  disk 0, wo:0, o:1, dev:sda1
<7>[   37.320588]  disk 1, wo:1, o:1, dev:sdb1
<6>[   37.320828] md: recovery of RAID array md9
<6>[   37.324947] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[   37.330813] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
<6>[   37.340418] md: Recovering started: md9
<6>[   37.344278] md: using 128k window, over a total of 530048k.
<6>[   38.626748] kjournald starting.  Commit interval 5 seconds
<6>[   38.640058] EXT3-fs (md9): using internal journal
<6>[   38.644783] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   39.004549] md: md13 stopped.
<6>[   39.014874] md: bind<sdb4>
<6>[   39.017887] md: bind<sda4>
<4>[   39.020684] md: kicking non-fresh sdb4 from array!
<6>[   39.025496] md: unbind<sdb4>
<6>[   39.059870] md: export_rdev(sdb4)
<6>[   39.066280] md/raid1:md13: active with 1 out of 32 mirrors
<6>[   39.071993] created bitmap (1 pages) for device md13
<6>[   39.077138] md13: bitmap initialized from disk: read 1/1 pages, set 7 of 8 bits
<6>[   39.116995] md13: detected capacity change from 0 to 469893120
<6>[   39.194817]  md13: unknown partition table
<6>[   39.204301] md: bind<sdb4>
<7>[   39.261574] RAID1 conf printout:
<7>[   39.261582]  --- wd:1 rd:32
<7>[   39.261590]  disk 0, wo:0, o:1, dev:sda4
<7>[   39.261596]  disk 1, wo:1, o:1, dev:sdb4
<6>[   39.261842] md: recovery of RAID array md13
<6>[   39.266048] md: minimum _guaranteed_  speed: 5000 KB/sec/disk.
<6>[   39.271925] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
<6>[   39.281526] md: Recovering started: md13
<6>[   39.285472] md: using 128k window, over a total of 458880k.
<4>[   78.522528] set stripe cache size 1024
<4>[   78.526817] STRIPE_CACHE_SIZE is 1024
<6>[   79.575298] md: bind<sda2>
<6>[   79.581275] md: bind<sdb2>
<6>[   79.587095] md/raid1:md256: active with 2 out of 2 mirrors
<6>[   79.592810] created bitmap (1 pages) for device md256
<6>[   79.598074] md256: bitmap initialized from disk: read 1/1 pages, set 9 of 9 bits
<6>[   79.626687] md256: detected capacity change from 0 to 542834688
<6>[   79.712864]  md256: unknown partition table
<6>[   79.774710] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k 
<6>[   80.550081] md: bind<sda5>
<6>[   80.553027] md: bind<sdb5>
<6>[   80.558990] md/raid1:md322: active with 2 out of 2 mirrors
<6>[   80.564731] created bitmap (1 pages) for device md322
<6>[   80.570082] md322: bitmap initialized from disk: read 1/1 pages, set 111 of 111 bits
<6>[   80.616313] md322: detected capacity change from 0 to 7408779264
<6>[   80.722332]  md322: unknown partition table
<6>[   80.985767] Adding 7235132k swap on /dev/md322.  Priority:-2 extents:1 across:7235132k 
<6>[   82.192808] md: md1 stopped.
<6>[   82.207759] md: bind<sdb3>
<6>[   82.210781] md: bind<sda3>
<4>[   82.213566] md: kicking non-fresh sdb3 from array!
<6>[   82.218377] md: unbind<sdb3>
<6>[   82.269939] md: export_rdev(sdb3)
<6>[   82.276543] md/raid1:md1: active with 1 out of 2 mirrors
<6>[   82.281977] md1: detected capacity change from 0 to 5990981238784
<5>[   82.383152] UBI: attaching mtd3 to ubi0
<5>[   82.387005] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[   82.393325] UBI: logical eraseblock size:    126976 bytes
<5>[   82.398737] UBI: smallest flash I/O unit:    2048
<5>[   82.403476] UBI: VID header offset:          2048 (aligned 2048)
<5>[   82.409498] UBI: data offset:                4096
<5>[   83.939010] UBI: max. sequence number:       2
<5>[   83.955884] UBI: attached mtd3 to ubi0
<5>[   83.959649] UBI: MTD device name:            "boot1_rootfs2"
<5>[   83.965339] UBI: MTD device size:            216 MiB
<5>[   83.970322] UBI: number of good PEBs:        1723
<5>[   83.975038] UBI: number of bad PEBs:         5
<5>[   83.979491] UBI: number of corrupted PEBs:   0
<5>[   83.983950] UBI: max. allowed volumes:       128
<5>[   83.988578] UBI: wear-leveling threshold:    4096
<5>[   83.993297] UBI: number of internal volumes: 1
<5>[   83.997751] UBI: number of user volumes:     1
<5>[   84.002207] UBI: available PEBs:             0
<5>[   84.006661] UBI: total number of reserved PEBs: 1723
<5>[   84.011641] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[   84.018209] UBI: max/mean erase counter: 25/16
<5>[   84.024244] UBI: image sequence number:  1486693232
<5>[   84.030778] UBI: background thread "ubi_bgt0d" started, PID 1263
<5>[   84.168104] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[   84.174240] UBIFS: mounted read-only
<5>[   84.177827] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[   84.185861] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[   84.193196] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[   84.199045] UBIFS: default compressor: lzo
<5>[   84.203157] UBIFS: reserved for root:  0 bytes (0 KiB)
<6>[   99.901055] md: md13: recovery done.
<6>[   99.904655] md: Recovering done: md13, degraded=31
<7>[  100.027310] RAID1 conf printout:
<7>[  100.027318]  --- wd:2 rd:32
<7>[  100.027326]  disk 0, wo:0, o:1, dev:sda4
<7>[  100.027332]  disk 1, wo:0, o:1, dev:sdb4
<5>[  107.074333] UBIFS: un-mount UBI device 0, volume 0
<5>[  107.119619] UBI: mtd3 is detached from ubi0
<6>[  107.960480] kjournald starting.  Commit interval 5 seconds
<6>[  108.014361] EXT3-fs (md13): using internal journal
<6>[  108.019174] EXT3-fs (md13): mounted filesystem with ordered data mode
<6>[  109.348735]  md1: unknown partition table
<6>[  109.393163] md: export_rdev(sdb3)
<6>[  109.602758] md: bind<sdb3>
<7>[  109.714277] RAID1 conf printout:
<7>[  109.714285]  --- wd:1 rd:2
<7>[  109.714295]  disk 0, wo:0, o:1, dev:sda3
<7>[  109.714302]  disk 1, wo:1, o:1, dev:sdb3
<6>[  109.714528] md: delaying recovery of md1 until md9 has finished (they share one or more physical units)
<6>[  121.286727] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl
<6>[  124.829650] md: md9: recovery done.
<6>[  124.834482] md: Recovering done: md9, degraded=31
<6>[  124.845633] md: recovery of RAID array md1
<6>[  124.849745] md: minimum _guaranteed_  speed: 40000 KB/sec/disk.
<6>[  124.855701] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
<6>[  124.865300] md: Recovering started: md1
<6>[  124.869159] md: using 128k window, over a total of 5850567616k.
<7>[  125.035714] RAID1 conf printout:
<7>[  125.035721]  --- wd:2 rd:32
<7>[  125.035728]  disk 0, wo:0, o:1, dev:sda1
<7>[  125.035735]  disk 1, wo:0, o:1, dev:sdb1
<6>[  128.243733] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.  Priority:-3 extents:16 across:17899516k 
<6>[  132.670469] warning: process `hal_app' used the deprecated sysctl system call with 8.1.2.
<4>[  133.714885] [S30mountall] start
<5>[  134.155901] UBI: attaching mtd3 to ubi0
<5>[  134.159754] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  134.166061] UBI: logical eraseblock size:    126976 bytes
<5>[  134.171495] UBI: smallest flash I/O unit:    2048
<5>[  134.176212] UBI: VID header offset:          2048 (aligned 2048)
<5>[  134.182249] UBI: data offset:                4096
<5>[  135.667301] UBI: max. sequence number:       2
<5>[  135.684185] UBI: attached mtd3 to ubi0
<5>[  135.687950] UBI: MTD device name:            "boot1_rootfs2"
<5>[  135.693641] UBI: MTD device size:            216 MiB
<5>[  135.698617] UBI: number of good PEBs:        1723
<5>[  135.703338] UBI: number of bad PEBs:         5
<5>[  135.707792] UBI: number of corrupted PEBs:   0
<5>[  135.712249] UBI: max. allowed volumes:       128
<5>[  135.716877] UBI: wear-leveling threshold:    4096
<5>[  135.721596] UBI: number of internal volumes: 1
<5>[  135.726051] UBI: number of user volumes:     1
<5>[  135.730508] UBI: available PEBs:             0
<5>[  135.734963] UBI: total number of reserved PEBs: 1723
<5>[  135.739943] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  135.746052] UBI: max/mean erase counter: 25/16
<5>[  135.750512] UBI: image sequence number:  1486693232
<5>[  135.755414] UBI: background thread "ubi_bgt0d" started, PID 1775
<5>[  135.885193] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  135.891320] UBIFS: mounted read-only
<5>[  135.894906] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  135.902939] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  135.910272] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  135.916120] UBIFS: default compressor: lzo
<5>[  135.920230] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  159.851659] UBIFS: un-mount UBI device 0, volume 0
<5>[  159.909373] UBI: mtd3 is detached from ubi0
<5>[  160.631727] UBI: attaching mtd3 to ubi0
<5>[  160.635584] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  160.641905] UBI: logical eraseblock size:    126976 bytes
<5>[  160.647319] UBI: smallest flash I/O unit:    2048
<5>[  160.652051] UBI: VID header offset:          2048 (aligned 2048)
<5>[  160.658078] UBI: data offset:                4096
<5>[  162.156229] UBI: max. sequence number:       2
<5>[  162.174562] UBI: attached mtd3 to ubi0
<5>[  162.178330] UBI: MTD device name:            "boot1_rootfs2"
<5>[  162.184034] UBI: MTD device size:            216 MiB
<5>[  162.189020] UBI: number of good PEBs:        1723
<5>[  162.193760] UBI: number of bad PEBs:         5
<5>[  162.198221] UBI: number of corrupted PEBs:   0
<5>[  162.202690] UBI: max. allowed volumes:       128
<5>[  162.207323] UBI: wear-leveling threshold:    4096
<5>[  162.212049] UBI: number of internal volumes: 1
<5>[  162.216506] UBI: number of user volumes:     1
<5>[  162.220967] UBI: available PEBs:             0
<5>[  162.225424] UBI: total number of reserved PEBs: 1723
<5>[  162.230409] UBI: number of PEBs reserved for bad PEB handling: 17
<5>[  162.236519] UBI: max/mean erase counter: 25/16
<5>[  162.240981] UBI: image sequence number:  1486693232
<5>[  162.245903] UBI: background thread "ubi_bgt0d" started, PID 1916
<5>[  162.408578] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
<5>[  162.414712] UBIFS: mounted read-only
<5>[  162.418299] UBIFS: file system size:   208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
<5>[  162.426332] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[  162.433666] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  162.439514] UBIFS: default compressor: lzo
<5>[  162.443625] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  162.517587] UBIFS: un-mount UBI device 0, volume 0
<5>[  162.569708] UBI: mtd3 is detached from ubi0
<5>[  199.223615] UBI: attaching mtd6 to ubi2
<5>[  199.227468] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  199.233781] UBI: logical eraseblock size:    126976 bytes
<5>[  199.239201] UBI: smallest flash I/O unit:    2048
<5>[  199.243951] UBI: VID header offset:          2048 (aligned 2048)
<5>[  199.249983] UBI: data offset:                4096
<5>[  199.357954] UBI: max. sequence number:       660
<5>[  199.388624] UBI: attached mtd6 to ubi2
<5>[  199.392448] UBI: MTD device name:            "config"
<5>[  199.397526] UBI: MTD device size:            15 MiB
<5>[  199.402424] UBI: number of good PEBs:        120
<5>[  199.407052] UBI: number of bad PEBs:         0
<5>[  199.411520] UBI: number of corrupted PEBs:   0
<5>[  199.415978] UBI: max. allowed volumes:       128
<5>[  199.420612] UBI: wear-leveling threshold:    4096
<5>[  199.425328] UBI: number of internal volumes: 1
<5>[  199.429783] UBI: number of user volumes:     1
<5>[  199.434258] UBI: available PEBs:             0
<5>[  199.438715] UBI: total number of reserved PEBs: 120
<5>[  199.443632] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  199.449661] UBI: max/mean erase counter: 7/6
<5>[  199.453974] UBI: image sequence number:  1872325126
<5>[  199.459471] UBI: background thread "ubi_bgt2d" started, PID 2422
<5>[  199.607650] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  199.613715] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  199.621328] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  199.628663] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  199.634519] UBIFS: default compressor: lzo
<5>[  199.638627] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  200.125628] UBIFS: un-mount UBI device 2, volume 0
<5>[  200.244911] UBI: mtd6 is detached from ubi2
<4>[  200.728206] [S30mountall] end
<4>[  200.732033] [S31init_hardware] start
<6>[  200.907039] sysinfo: Module loaded.
<6>[  201.876136] fnotify: Load file notify kernel module.
<6>[  203.318115] usbcore: registered new interface driver snd-usb-audio
<6>[  203.338142] usbcore: registered new interface driver snd-usb-caiaq
<6>[  203.432196] Linux video capture interface: v2.00
<6>[  203.562542] usbcore: registered new interface driver uvcvideo
<6>[  203.568394] USB Video Class driver (1.1.1)
<6>[  203.849253] NET: Registered protocol family 10
<4>[  207.179236] [S31init_hardware] end
<4>[  207.183247] [S32init_mac_addr] start
<6>[  208.403566] eth0: pfe_eth_open
<6>[  208.406837] hif_process_client_req: register client_id 1
<6>[  208.412177] pfe_hif_client_register
<6>[  208.415712] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
<6>[  208.424011] eth0: pfe_gemac_init
<6>[  208.427818] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[  209.104609] eth1: pfe_eth_open
<6>[  209.107810] hif_process_client_req: register client_id 0
<6>[  209.113156] pfe_hif_client_register
<6>[  209.116665] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
<6>[  209.124984] eth1: pfe_gemac_init
<6>[  209.128807] ADDRCONF(NETDEV_UP): eth1: link is not ready
<4>[  211.198735] [S32init_mac_addr] end
<4>[  211.202734] [S33sysinit] start
<6>[  211.420083] PHY: comcerto-0:06 - Link is Up - 1000/Full
<6>[  211.425509] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<7>[  222.489861] eth0: no IPv6 routers present
<5>[  235.063273] UBI: attaching mtd6 to ubi2
<5>[  235.067126] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  235.073451] UBI: logical eraseblock size:    126976 bytes
<5>[  235.078869] UBI: smallest flash I/O unit:    2048
<5>[  235.083608] UBI: VID header offset:          2048 (aligned 2048)
<5>[  235.089634] UBI: data offset:                4096
<5>[  235.197768] UBI: max. sequence number:       661
<5>[  235.215371] UBI: attached mtd6 to ubi2
<5>[  235.219146] UBI: MTD device name:            "config"
<5>[  235.224258] UBI: MTD device size:            15 MiB
<5>[  235.229153] UBI: number of good PEBs:        120
<5>[  235.233802] UBI: number of bad PEBs:         0
<5>[  235.238261] UBI: number of corrupted PEBs:   0
<5>[  235.242726] UBI: max. allowed volumes:       128
<5>[  235.247357] UBI: wear-leveling threshold:    4096
<5>[  235.252080] UBI: number of internal volumes: 1
<5>[  235.256539] UBI: number of user volumes:     1
<5>[  235.261005] UBI: available PEBs:             0
<5>[  235.265462] UBI: total number of reserved PEBs: 120
<5>[  235.270359] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  235.276382] UBI: max/mean erase counter: 7/6
<5>[  235.280667] UBI: image sequence number:  1872325126
<5>[  235.285570] UBI: background thread "ubi_bgt2d" started, PID 3094
<5>[  235.430249] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  235.436286] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  235.443908] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  235.451253] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  235.457105] UBIFS: default compressor: lzo
<5>[  235.461216] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  235.492818] UBIFS: un-mount UBI device 2, volume 0
<4>[  325.867434] [S33sysinit] end
<4>[  325.870962] [S34shutdown_check] start
<4>[  326.150344] [S34shutdown_check] end
<4>[  326.154628] [S35init_disk] start
<5>[  326.496812] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  326.502890] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  326.510498] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  326.517837] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  326.523705] UBIFS: default compressor: lzo
<5>[  326.527819] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  326.751996] UBIFS: un-mount UBI device 2, volume 0
<5>[  326.795952] UBI: mtd6 is detached from ubi2
<4>[  328.460416] [S35init_disk] end
<4>[  328.464130] [S40init_network] start
<4>[  328.477482] [S40init_network] end
<4>[  328.481550] [S42hostname] start
<4>[  328.956530] [S42hostname] end
<4>[  328.960617] [S45network] start
<5>[  339.349310] Bridge firewalling registered
<6>[  339.921996] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[  339.929168] bonding: MII link monitoring set to 100 ms
<6>[  348.591937] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[  358.758323] [S45network] end
<4>[  358.761871] [S46iSCSItrgt] start
<4>[  366.912606] [S46iSCSItrgt] end
<4>[  366.925571] [S46iscsiinit] start
<6>[  367.006696] Loading iSCSI transport class v2.0-870.
<5>[  367.058972] iscsi: registered transport (tcp)
<4>[  368.381871] [S46iscsiinit] end
<4>[  368.385501] [S55urandom] start
<4>[  368.413408] [S55urandom] end
<4>[  368.416855] [S56mariadb] start
<4>[  374.917047] [S56mariadb] end
<4>[  374.920760] [S56start_service] start
<4>[  375.035706] [S56start_service] end
<4>[  375.039996] [S57init_qpkg] start
<4>[  440.075116] ==== memory usage ====
<4>[  440.145649] MemTotal:         490756 kB
<4>[  440.149529] MemFree:          105684 kB
<4>[  440.160005] Buffers:           36544 kB
<4>[  440.163909] Cached:           226020 kB
<4>[  440.167793] SwapCached:           16 kB
<4>[  440.179955] Active:           118468 kB
<4>[  440.183846] Inactive:         211456 kB
<4>[  440.187712] Active(anon):      54832 kB
<4>[  440.206540] Inactive(anon):    57668 kB
<4>[  440.210456] Active(file):      63636 kB
<4>[  440.214331] Inactive(file):   153788 kB
<4>[  440.218217] Unevictable:        2012 kB
<4>[  440.239972] Mlocked:            2012 kB
<4>[  440.243866] SwapTotal:      24542452 kB
<4>[  440.247752] SwapFree:       24542352 kB
<4>[  440.259955] Dirty:               372 kB
<4>[  440.263879] Writeback:             0 kB
<4>[  440.275359] AnonPages:         69212 kB
<4>[  440.296662] Mapped:            15916 kB
<4>[  440.311141] Shmem:             44996 kB
<4>[  440.315606] Slab:              34428 kB
<4>[  440.319489] SReclaimable:      22648 kB
<4>[  440.338788] SUnreclaim:        11780 kB
<4>[  440.354002] KernelStack:        1800 kB
<4>[  440.358303] PageTables:         1420 kB
<4>[  440.375909] NFS_Unstable:          0 kB
<4>[  440.385217] Bounce:                0 kB
<4>[  440.405902] WritebackTmp:          0 kB
<4>[  440.411971] CommitLimit:    24787828 kB
<4>[  440.416117] Committed_AS:     881220 kB
<4>[  440.420050] VmallocTotal:    1302528 kB
<4>[  440.440773] VmallocUsed:       61368 kB
<4>[  440.446419] VmallocChunk:    1212348 kB
<4>[  440.522410] Node 0, zone      DMA
<4>[  440.525774]   pages free     10978
<4>[  440.529259]         min      366
<4>[  440.532639]         low      457
<4>[  440.535919]         high     549
<4>[  440.539194]         scanned  0
<4>[  440.542349]         spanned  11264
<4>[  440.554549]         present  11154
<4>[  440.558056]     nr_free_pages 10978
<4>[  440.561687]     nr_inactive_anon 0
<4>[  440.565153]     nr_active_anon 0
<4>[  440.571170]     nr_inactive_file 0
<4>[  440.575280]     nr_active_file 0
<4>[  440.594596]     nr_unevictable 0
<4>[  440.598121]     nr_mlock     0
<4>[  440.601259]     nr_anon_pages 0
<4>[  440.604444]     nr_mapped    0
<4>[  440.607546]     nr_file_pages 0
<4>[  440.611268]     nr_dirty     0
<4>[  440.615335]     nr_writeback 0
<4>[  440.618623]     nr_slab_reclaimable 0
<4>[  440.622422]     nr_slab_unreclaimable 0
<4>[  440.626300]     nr_page_table_pages 0
<4>[  440.638563]     nr_kernel_stack 0
<4>[  440.641987]     nr_unstable  0
<4>[  440.645076]     nr_bounce    0
<4>[  440.648158]     nr_vmscan_write 0
<4>[  440.656669]     nr_vmscan_immediate_reclaim 0
<4>[  440.661136]     nr_writeback_temp 0
<4>[  440.664662]     nr_isolated_anon 0
<4>[  440.668093]     nr_isolated_file 0
<4>[  440.671576]     nr_shmem     0
<4>[  440.674661]     nr_dirtied   0
<4>[  440.677742]     nr_written   0
<4>[  440.680874]     nr_anon_transparent_hugepages 0
<4>[  440.685442]         protection: (0, 443, 443)
<4>[  440.689830]   pagesets
<4>[  440.692348]     cpu: 0
<4>[  440.694741]               count: 4
<4>[  440.698169]               high:  6
<4>[  440.701658]               batch: 1
<4>[  440.705110]   vm stats threshold: 4
<4>[  440.708627]     cpu: 1
<4>[  440.711059]               count: 0
<4>[  440.714491]               high:  6
<4>[  440.717917]               batch: 1
<4>[  440.721389]   vm stats threshold: 4
<4>[  440.724906]   all_unreclaimable: 0
<4>[  440.728334]   start_pfn:         0
<4>[  440.731797]   inactive_ratio:    1
<4>[  440.735226] Node 0, zone   Normal
<4>[  440.738565]   pages free     14821
<4>[  440.742027]         min      3729
<4>[  440.745369]         low      4661
<4>[  440.748705]         high     5593
<4>[  440.752079]         scanned  0
<4>[  440.755160]         spanned  119808
<4>[  440.758674]         present  113518
<4>[  440.762219]     nr_free_pages 14821
<4>[  440.765736]     nr_inactive_anon 14417
<4>[  440.769509]     nr_active_anon 13929
<4>[  440.773153]     nr_inactive_file 38447
<4>[  440.776929]     nr_active_file 15909
<4>[  440.780563]     nr_unevictable 503
<4>[  440.783993]     nr_mlock     503
<4>[  440.787243]     nr_anon_pages 17569
<4>[  440.791080]     nr_mapped    4055
<4>[  440.794542]     nr_file_pages 65645
<4>[  440.798061]     nr_dirty     93
<4>[  440.801336]     nr_writeback 0
<4>[  440.804424]     nr_slab_reclaimable 5662
<4>[  440.808371]     nr_slab_unreclaimable 2945
<4>[  440.812537]     nr_page_table_pages 355
<4>[  440.816402]     nr_kernel_stack 225
<4>[  440.819943]     nr_unstable  0
<4>[  440.823022]     nr_bounce    0
<4>[  440.826227]     nr_vmscan_write 25
<4>[  440.829765]     nr_vmscan_immediate_reclaim 201
<4>[  440.834456]     nr_writeback_temp 0
<4>[  440.837976]     nr_isolated_anon 0
<4>[  440.841532]     nr_isolated_file 0
<4>[  440.844965]     nr_shmem     11249
<4>[  440.848493]     nr_dirtied   352308
<4>[  440.852118]     nr_written   350909
<4>[  440.855707]     nr_anon_transparent_hugepages 0
<4>[  440.860472]         protection: (0, 0, 0)
<4>[  440.864586]   pagesets
<4>[  440.866973]     cpu: 0
<4>[  440.869353]               count: 61
<4>[  440.872911]               high:  186
<4>[  440.876515]               batch: 31
<4>[  440.880063]   vm stats threshold: 12
<4>[  440.883684]     cpu: 1
<4>[  440.886092]               count: 164
<4>[  440.889715]               high:  186
<4>[  440.893645]               batch: 31
<4>[  440.897255]   vm stats threshold: 12
<4>[  440.900899]   all_unreclaimable: 0
<4>[  440.904381]   start_pfn:         11264
<4>[  440.908172]   inactive_ratio:    1
<4>[  440.935695] Filename				Type		Size	Used	Priority
<4>[  440.940465] /dev/md256                              partition	530108	100	-1
<4>[  440.947474] /dev/md322                              partition	7235132	0	-2
<4>[  440.954451] /share/CACHEDEV1_DATA/.swap/qnap_swap   file		16777212	0	-3
<4>[  440.978263]               total         used         free       shared      buffers
<4>[  440.978272]   Mem:       490756       385404       105352            0        36544
<4>[  440.978275]  Swap:     24542452          100     24542352
<4>[  440.978278] Total:     25033208       385504     24647704
<4>[  441.022941] ==== end ====
<4>[  563.848148] [S57init_qpkg] end
<4>[  563.851812] [S57ldap] start
<4>[  563.890814] [S57ldap] end
<4>[  563.894083] [S58dbus] start
<4>[  566.108219] [S58dbus] end
<4>[  566.112482] [S58nsswitch] start
<4>[  566.388296] [S58nsswitch] end
<4>[  566.394379] [S58printer] start
<4>[  566.474890] [S58printer] end
<4>[  571.484737] [S59Qthttpd] start
<4>[  590.099393] [S59Qthttpd] end
<4>[  590.104453] [S62cupsd] start
<4>[  591.661074] [S62cupsd] end
<4>[  591.664454] [S62ntpd] start
<4>[  591.785359] [S62ntpd] end
<4>[  591.788609] [S62smb] start
<4>[  620.473185] [S62smb] end
<4>[  620.476342] [S64MediaService] start
<4>[  620.986372] [S64MediaService] end
<4>[  620.991958] [S65thttpd] start
<4>[  629.748905] [S65thttpd] end
<4>[  629.752363] [S66ImRd] start
<4>[  629.756503] [S66ImRd] end
<4>[  629.759977] [S66wfm_thttpd] start
<4>[  633.421800] [S66wfm_thttpd] end
<4>[  633.425624] [S67ftp] start
<4>[  633.789711] [S67ftp] end
<4>[  633.793011] [S70crond] start
<4>[  633.797238] [S70crond] end
<4>[  633.800794] [S72logo] start
<4>[  633.805188] [S72logo] end
<4>[  633.808472] [S73ntpclient] start
<4>[  633.819802] [S73ntpclient] end
<4>[  633.823637] [S75stunnel] start
<4>[  633.827982] [S75stunnel] end
<4>[  633.848849] [S77recycled] start
<4>[  635.377528] [S77recycled] end
<4>[  635.381591] [S78qraid1] start
<4>[  635.386635] [S78qraid1] end
<4>[  635.410756] [S83ups] start
<4>[  635.415046] [S83ups] end
<4>[  635.418375] [S85login] start
<4>[  635.441748] [S85login] end
<4>[  635.450649] [S89bonjour] start
<4>[  635.487750] [S89bonjour] end
<4>[  635.497557] [S89wsd] start
<4>[  635.507396] [S89wsd] end
<6>[  636.374704] Bluetooth: Core ver 2.16
<6>[  636.378348] NET: Registered protocol family 31
<6>[  636.382850] Bluetooth: HCI device and connection manager initialized
<6>[  636.389263] Bluetooth: HCI socket layer initialized
<6>[  636.394191] Bluetooth: L2CAP socket layer initialized
<6>[  636.399293] Bluetooth: SCO socket layer initialized
<6>[  636.474097] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[  636.479778] usbcore: registered new interface driver btusb
<6>[  636.560023] Bluetooth: RFCOMM TTY layer initialized
<6>[  636.564947] Bluetooth: RFCOMM socket layer initialized
<6>[  636.570141] Bluetooth: RFCOMM ver 1.11
<4>[  648.718319] [S90twonkymedia] start
<4>[  648.723167] [S90twonkymedia] end
<4>[  648.727247] [S92lunportman] start
<4>[  648.732538] [S92lunportman] end
<4>[  648.736486] [S95snmp] start
<4>[  648.747163] [S95snmp] end
<4>[  648.750637] [S97upnpd] start
<4>[  648.755361] [S97upnpd] end
<4>[  648.758896] [S98init_nas] start
<5>[  657.405411] UBI: attaching mtd6 to ubi2
<5>[  657.409273] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  657.415618] UBI: logical eraseblock size:    126976 bytes
<5>[  657.421082] UBI: smallest flash I/O unit:    2048
<5>[  657.425808] UBI: VID header offset:          2048 (aligned 2048)
<5>[  657.431859] UBI: data offset:                4096
<5>[  657.570636] UBI: max. sequence number:       663
<5>[  657.594002] UBI: attached mtd6 to ubi2
<5>[  657.597777] UBI: MTD device name:            "config"
<5>[  657.602883] UBI: MTD device size:            15 MiB
<5>[  657.609027] UBI: number of good PEBs:        120
<5>[  657.613707] UBI: number of bad PEBs:         0
<5>[  657.620400] UBI: number of corrupted PEBs:   0
<5>[  657.626005] UBI: max. allowed volumes:       128
<5>[  657.632790] UBI: wear-leveling threshold:    4096
<5>[  657.638851] UBI: number of internal volumes: 1
<5>[  657.646192] UBI: number of user volumes:     1
<5>[  657.651920] UBI: available PEBs:             0
<5>[  657.659663] UBI: total number of reserved PEBs: 120
<5>[  657.665758] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  657.673763] UBI: max/mean erase counter: 7/6
<5>[  657.679135] UBI: image sequence number:  1872325126
<5>[  657.686071] UBI: background thread "ubi_bgt2d" started, PID 13331
<5>[  657.815426] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  657.821506] UBIFS: mounted read-only
<5>[  657.825097] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  657.832705] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  657.840043] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  657.845893] UBIFS: default compressor: lzo
<5>[  657.850014] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  657.866173] UBIFS: un-mount UBI device 2, volume 0
<5>[  657.939180] UBI: mtd6 is detached from ubi2
<4>[  661.906395] rule type=2, num=2
<4>[  666.290929] [S98init_nas] end
<4>[  666.294440] [S99atalk] start
<4>[  666.301989] [S99atalk] end
<4>[  666.305440] [S99cloudinstall_report_complete_daemon] start
<4>[  666.330016] [S99cloudinstall_report_complete_daemon] end
<4>[  666.336085] [S99init_iTune] start
<4>[  666.367033] [S99init_iTune] end
<4>[  666.380163] [S99mysqld] start
<4>[  666.384313] [S99mysqld] end
<4>[  666.387645] [S99nfs] start
<4>[  666.423199] [S99nfs] end
<4>[  666.446889] [S99porter] start
<4>[  666.466243] [S99porter] end
<4>[  666.469597] [S99qanalytic] start
<4>[  666.511387] [S99qanalytic] end
<4>[  666.515296] [S99qcloud] start
<4>[  666.570979] [S99qcloud] end
<4>[  666.574473] [S99qsyncman] start
<4>[  666.578928] [S99qsyncman] end
<4>[  666.666910] [S99sdmd.sh] start
<4>[  666.692377] [S99sdmd.sh] end
<4>[  666.695868] [S99sync_action.sh] start
<4>[  666.761057] [S99sync_action.sh] end
<4>[  666.798684] [S99z_antivirus] start
<4>[  666.841649] [S99z_antivirus] end
<4>[  682.334270] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[  682.342160] NFSD: starting 90-second grace period
<4>[  772.311979] ====== 2020-04-28 09:39:20 TS-231 (4.3.6.1218-20200214) boot finished.
<5>[  796.804901] UBI: attaching mtd6 to ubi2
<5>[  796.808762] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[  796.815090] UBI: logical eraseblock size:    126976 bytes
<5>[  796.820517] UBI: smallest flash I/O unit:    2048
<5>[  796.825282] UBI: VID header offset:          2048 (aligned 2048)
<5>[  796.831327] UBI: data offset:                4096
<5>[  797.009265] UBI: max. sequence number:       663
<5>[  797.031575] UBI: attached mtd6 to ubi2
<5>[  797.036113] UBI: MTD device name:            "config"
<5>[  797.041557] UBI: MTD device size:            15 MiB
<5>[  797.046468] UBI: number of good PEBs:        120
<5>[  797.051110] UBI: number of bad PEBs:         0
<5>[  797.055890] UBI: number of corrupted PEBs:   0
<5>[  797.060722] UBI: max. allowed volumes:       128
<5>[  797.065392] UBI: wear-leveling threshold:    4096
<5>[  797.070109] UBI: number of internal volumes: 1
<5>[  797.074587] UBI: number of user volumes:     1
<5>[  797.079042] UBI: available PEBs:             0
<5>[  797.083543] UBI: total number of reserved PEBs: 120
<5>[  797.088435] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[  797.094571] UBI: max/mean erase counter: 7/6
<5>[  797.098860] UBI: image sequence number:  1872325126
<5>[  797.104749] UBI: background thread "ubi_bgt2d" started, PID 18797
<5>[  797.230618] UBIFS: mounted UBI device 2, volume 0, name "config"
<5>[  797.236792] UBIFS: file system size:   12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
<5>[  797.244492] UBIFS: journal size:       2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
<5>[  797.251986] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[  797.257840] UBIFS: default compressor: lzo
<5>[  797.261972] UBIFS: reserved for root:  0 bytes (0 KiB)
<5>[  797.508614] UBIFS: un-mount UBI device 2, volume 0
<5>[  797.567961] UBI: mtd6 is detached from ubi2



============= [ EVENT LOG ]  [ TOP ]

log_tool -qv 

Query database...
event_id,event_type,event_date,event_time,event_user,event_ip,event_comp,event_desc,event_msgid,event_timet,event_app_id,event_app_name,event_category_id,event_category,
  1,  0,2020-03-11,15:13:00,admin,82.186.111.114,---,[System Logs] Cleared all logs.,  4,1583935980,A013,System Logs,C001,System Event,
  2,  0,2020-03-11,18:47:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1583948860,A041,myQNAPcloud,C003,myQNAPcloud Link,
  3,  0,2020-03-11,18:51:12,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1583949072,A041,myQNAPcloud,C003,myQNAPcloud Link,
  4,  0,2020-03-12,09:41:09,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584002469,A041,myQNAPcloud,C003,myQNAPcloud Link,
  5,  0,2020-03-12,09:46:58,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584002818,A041,myQNAPcloud,C003,myQNAPcloud Link,
  6,  0,2020-03-12,10:16:55,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "79.30.188.137"., 15,1584004615,A041,myQNAPcloud,C002,My DDNS,
  7,  0,2020-03-12,11:39:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584009561,A041,myQNAPcloud,C003,myQNAPcloud Link,
  8,  0,2020-03-12,11:43:05,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584009785,A041,myQNAPcloud,C003,myQNAPcloud Link,
  9,  0,2020-03-12,14:58:06,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584021486,A041,myQNAPcloud,C003,myQNAPcloud Link,
 10,  0,2020-03-12,15:03:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584021820,A041,myQNAPcloud,C003,myQNAPcloud Link,
 11,  2,2020-03-12,15:44:56,admin,82.186.111.114,---,[Users] Failed to log in via user account "admin". Source IP address: 82.186.111.114., 26,1584024296,A015,Users,C002,Login,
 12,  0,2020-03-12,17:14:56,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584029696,A041,myQNAPcloud,C003,myQNAPcloud Link,
 13,  0,2020-03-12,17:20:20,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584030020,A041,myQNAPcloud,C003,myQNAPcloud Link,
 14,  0,2020-03-12,17:52:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584031971,A041,myQNAPcloud,C003,myQNAPcloud Link,
 15,  0,2020-03-12,17:56:54,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584032214,A041,myQNAPcloud,C003,myQNAPcloud Link,
 16,  0,2020-03-12,22:11:53,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584047513,A041,myQNAPcloud,C003,myQNAPcloud Link,
 17,  0,2020-03-12,22:15:26,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584047726,A041,myQNAPcloud,C003,myQNAPcloud Link,
 18,  0,2020-03-13,11:23:26,System,127.0.0.1,localhost,[Power] System started., 18,1584095006,A007,Power,C001,NAS Power Status,
 19,  1,2020-03-13,11:23:27,System,127.0.0.1,localhost,[Power] The system was not shut down properly last time., 19,1584095007,A007,Power,C001,NAS Power Status,
 20,  1,2020-03-13,11:25:45,System,127.0.0.1,localhost,[Volume NAS] The file system is not clean. It is suggested that you go to [Storage Manager] to run "Check File System".,---,1584095145,---,---,---,---,
 21,  0,2020-03-13,11:26:12,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "79.30.188.137"., 15,1584095172,A041,myQNAPcloud,C002,My DDNS,
 22,  0,2020-03-13,11:27:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584095251,A041,myQNAPcloud,C003,myQNAPcloud Link,
 23,  0,2020-03-13,11:27:34,System,127.0.0.1,localhost,[External Device] USB UPS plugged in., 14,1584095254,A011,External Device,C002,UPS,
 24,  2,2020-03-13,11:52:23,admin,82.186.111.114,---,[Users] Failed to log in via user account "admin". Source IP address: 82.186.111.114., 26,1584096743,A015,Users,C002,Login,
 25,  0,2020-03-13,11:53:32,System,127.0.0.1,localhost,[Storage Manager] Started checking file system. Volume: NAS.,454,1584096812,A002,Storage Manager,C001,Volume,
 26,  0,2020-03-13,11:59:47,System,127.0.0.1,localhost,[External Device] Changed UPS model to USB server mode.,  5,1584097187,A011,External Device,C002,UPS,
 27,  0,2020-03-13,11:59:48,System,127.0.0.1,localhost,[External Device] Changed UPS settings.,  6,1584097188,A011,External Device,C002,UPS,
 28,  0,2020-03-13,12:04:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584097451,A041,myQNAPcloud,C003,myQNAPcloud Link,
 29,  0,2020-03-13,12:04:12,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1584097452,A041,myQNAPcloud,C003,myQNAPcloud Link,
 30,  0,2020-03-13,12:05:09,System,127.0.0.1,localhost,[Storage Manager] Finished checking file system. Volume: NAS.,455,1584097509,A002,Storage Manager,C001,Volume,
 31,  1,2020-03-13,13:24:37,System,127.0.0.1,localhost,[Power] The system was not shut down properly last time., 19,1584102277,A007,Power,C001,NAS Power Status,
 32,  0,2020-03-13,13:24:38,System,127.0.0.1,localhost,[Power] System started., 18,1584102278,A007,Power,C001,NAS Power Status,
 33,  1,2020-03-13,13:26:47,System,127.0.0.1,localhost,[Volume NAS] The file system is not clean. It is suggested that you go to [Storage Manager] to run "Check File System".,---,1584102407,---,---,---,---,
 34,  0,2020-03-13,13:27:16,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "79.30.188.137"., 15,1584102436,A041,myQNAPcloud,C002,My DDNS,
 35,  0,2020-03-13,13:28:36,System,127.0.0.1,localhost,[External Device] USB UPS plugged in., 14,1584102516,A011,External Device,C002,UPS,
 36,  0,2020-03-13,13:28:39,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584102519,A041,myQNAPcloud,C003,myQNAPcloud Link,
 37,  0,2020-03-13,13:31:13,System,127.0.0.1,localhost,[Storage Manager] Started checking file system. Volume: NAS.,454,1584102673,A002,Storage Manager,C001,Volume,
 38,  0,2020-03-13,13:41:49,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584103309,A041,myQNAPcloud,C003,myQNAPcloud Link,
 39,  0,2020-03-13,13:41:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1584103311,A041,myQNAPcloud,C003,myQNAPcloud Link,
 40,  0,2020-03-13,13:42:52,System,127.0.0.1,localhost,[Storage Manager] Finished checking file system. Volume: NAS.,455,1584103372,A002,Storage Manager,C001,Volume,
 41,  0,2020-03-13,13:44:56,admin,192.168.169.3,---,[Power] Shutting down NAS.,  2,1584103496,A007,Power,C001,NAS Power Status,
 42,  0,2020-03-13,13:47:24,System,127.0.0.1,localhost,[Power] System shut down on Fri Mar 13 13:47:23 CET 2020., 17,1584103644,A007,Power,C001,NAS Power Status,
 43,  0,2020-03-13,13:47:41,System,127.0.0.1,localhost,[External Device] USB UPS unplugged., 16,1584103661,A011,External Device,C002,UPS,
 44,  0,2020-03-13,13:56:54,System,127.0.0.1,localhost,[Power] System started., 18,1584104214,A007,Power,C001,NAS Power Status,
 45,  0,2020-03-13,14:00:45,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1584104445,A041,myQNAPcloud,C003,myQNAPcloud Link,
 46,  0,2020-03-13,14:00:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584104448,A041,myQNAPcloud,C003,myQNAPcloud Link,
 47,  0,2020-03-13,14:00:57,System,127.0.0.1,localhost,[External Device] USB UPS plugged in., 14,1584104457,A011,External Device,C002,UPS,
 48,  0,2020-03-13,14:30:18,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584106218,A041,myQNAPcloud,C003,myQNAPcloud Link,
 49,  0,2020-03-13,14:30:49,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584106249,A041,myQNAPcloud,C003,myQNAPcloud Link,
 50,  2,2020-03-14,17:50:47,admin,51.77.141.209,---,[Users] Failed to log in via user account "admin". Source IP address: 51.77.141.209., 26,1584204647,A015,Users,C002,Login,
 51,  0,2020-03-15,15:19:28,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584281968,A041,myQNAPcloud,C003,myQNAPcloud Link,
 52,  0,2020-03-15,15:22:39,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584282159,A041,myQNAPcloud,C003,myQNAPcloud Link,
 53,  0,2020-03-15,18:15:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584292507,A041,myQNAPcloud,C003,myQNAPcloud Link,
 54,  0,2020-03-15,18:18:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584292711,A041,myQNAPcloud,C003,myQNAPcloud Link,
 55,  0,2020-03-15,18:19:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584292747,A041,myQNAPcloud,C003,myQNAPcloud Link,
 56,  0,2020-03-15,18:22:19,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584292939,A041,myQNAPcloud,C003,myQNAPcloud Link,
 57,  0,2020-03-16,11:02:34,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584352954,A041,myQNAPcloud,C003,myQNAPcloud Link,
 58,  0,2020-03-16,11:07:06,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584353226,A041,myQNAPcloud,C003,myQNAPcloud Link,
 59,  0,2020-03-16,11:08:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584353337,A041,myQNAPcloud,C003,myQNAPcloud Link,
 60,  0,2020-03-16,11:14:17,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584353657,A041,myQNAPcloud,C003,myQNAPcloud Link,
 61,  0,2020-03-16,12:00:37,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584356437,A041,myQNAPcloud,C003,myQNAPcloud Link,
 62,  0,2020-03-16,12:06:00,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584356760,A041,myQNAPcloud,C003,myQNAPcloud Link,
 63,  0,2020-03-16,12:41:42,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584358902,A041,myQNAPcloud,C003,myQNAPcloud Link,
 64,  0,2020-03-16,12:47:02,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584359222,A041,myQNAPcloud,C003,myQNAPcloud Link,
 65,  0,2020-03-16,13:36:04,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584362164,A041,myQNAPcloud,C003,myQNAPcloud Link,
 66,  0,2020-03-16,13:37:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584362271,A041,myQNAPcloud,C003,myQNAPcloud Link,
 67,  0,2020-03-16,15:22:18,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584368538,A041,myQNAPcloud,C003,myQNAPcloud Link,
 68,  0,2020-03-16,15:30:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584369016,A041,myQNAPcloud,C003,myQNAPcloud Link,
 69,  0,2020-03-16,16:33:37,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584372817,A041,myQNAPcloud,C003,myQNAPcloud Link,
 70,  0,2020-03-16,16:36:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584372976,A041,myQNAPcloud,C003,myQNAPcloud Link,
 71,  0,2020-03-16,20:11:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584385891,A041,myQNAPcloud,C003,myQNAPcloud Link,
 72,  0,2020-03-16,20:15:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584386111,A041,myQNAPcloud,C003,myQNAPcloud Link,
 73,  0,2020-03-16,23:04:58,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584396298,A041,myQNAPcloud,C003,myQNAPcloud Link,
 74,  0,2020-03-16,23:06:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584396417,A041,myQNAPcloud,C003,myQNAPcloud Link,
 75,  0,2020-03-17,09:59:15,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584435555,A041,myQNAPcloud,C003,myQNAPcloud Link,
 76,  0,2020-03-17,10:01:20,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584435680,A041,myQNAPcloud,C003,myQNAPcloud Link,
 77,  0,2020-03-17,13:35:39,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584448539,A041,myQNAPcloud,C003,myQNAPcloud Link,
 78,  0,2020-03-17,13:42:10,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584448930,A041,myQNAPcloud,C003,myQNAPcloud Link,
 79,  0,2020-03-17,15:12:56,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584454376,A041,myQNAPcloud,C003,myQNAPcloud Link,
 80,  0,2020-03-17,15:18:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584454696,A041,myQNAPcloud,C003,myQNAPcloud Link,
 81,  0,2020-03-17,17:19:50,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584461990,A041,myQNAPcloud,C003,myQNAPcloud Link,
 82,  0,2020-03-17,17:26:13,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584462373,A041,myQNAPcloud,C003,myQNAPcloud Link,
 83,  0,2020-03-17,20:17:13,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584472633,A041,myQNAPcloud,C003,myQNAPcloud Link,
 84,  0,2020-03-17,20:25:23,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584473123,A041,myQNAPcloud,C003,myQNAPcloud Link,
 85,  0,2020-03-17,23:15:59,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584483359,A041,myQNAPcloud,C003,myQNAPcloud Link,
 86,  0,2020-03-17,23:21:29,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584483689,A041,myQNAPcloud,C003,myQNAPcloud Link,
 87,  0,2020-03-18,00:53:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584489223,A041,myQNAPcloud,C003,myQNAPcloud Link,
 88,  0,2020-03-18,01:09:46,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584490186,A041,myQNAPcloud,C003,myQNAPcloud Link,
 89,  0,2020-03-18,10:05:55,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584522355,A041,myQNAPcloud,C003,myQNAPcloud Link,
 90,  0,2020-03-18,10:09:28,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584522568,A041,myQNAPcloud,C003,myQNAPcloud Link,
 91,  0,2020-03-18,13:24:46,admin,192.168.169.135,---,[Users] Created user "Smania"., 25,1584534286,A015,Users,C001,General,
 92,  0,2020-03-18,13:27:07,admin,192.168.169.135,---,[Shared Folders] Created shared folder "Smania".,  1,1584534427,A018,Shared Folders,C001,General,
 93,  0,2020-03-18,13:29:35,admin,192.168.169.135,---,[Shared Folders] Edited the permission settings of shared folder "Smania".,  4,1584534575,A018,Shared Folders,C001,General,
 94,  0,2020-03-18,13:30:45,admin,192.168.169.135,---,[Shared Folders] Edited the permission settings of shared folder "homes".,  4,1584534645,A018,Shared Folders,C001,General,
 95,  0,2020-03-18,13:36:09,System,127.0.0.1,---,[Users] Created the Home folder of user "Smania"., 24,1584534969,A015,Users,C001,General,
 96,  0,2020-03-18,13:41:22,admin,192.168.169.135,---,[FTP Server] Enabled FTP service.,  2,1584535282,A023,FTP Server,C002,General,
 97,  0,2020-03-18,13:42:10,admin,192.168.169.135,---,[FTP Server] Disabled FTP service.,  1,1584535330,A023,FTP Server,C002,General,
 98,  0,2020-03-18,14:22:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584537772,A041,myQNAPcloud,C003,myQNAPcloud Link,
 99,  0,2020-03-18,14:33:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584538431,A041,myQNAPcloud,C003,myQNAPcloud Link,
100,  0,2020-03-18,15:45:09,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584542709,A041,myQNAPcloud,C003,myQNAPcloud Link,
101,  0,2020-03-18,15:48:27,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584542907,A041,myQNAPcloud,C003,myQNAPcloud Link,
102,  0,2020-03-18,17:32:54,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584549174,A041,myQNAPcloud,C003,myQNAPcloud Link,
103,  0,2020-03-18,17:38:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584549537,A041,myQNAPcloud,C003,myQNAPcloud Link,
104,  0,2020-03-18,19:22:35,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584555755,A041,myQNAPcloud,C003,myQNAPcloud Link,
105,  0,2020-03-18,19:25:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584555952,A041,myQNAPcloud,C003,myQNAPcloud Link,
106,  0,2020-03-19,07:01:29,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584597689,A041,myQNAPcloud,C003,myQNAPcloud Link,
107,  0,2020-03-19,07:03:36,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584597816,A041,myQNAPcloud,C003,myQNAPcloud Link,
108,  0,2020-03-19,07:06:38,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584597998,A041,myQNAPcloud,C003,myQNAPcloud Link,
109,  0,2020-03-19,07:12:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584598323,A041,myQNAPcloud,C003,myQNAPcloud Link,
110,  0,2020-03-19,10:16:53,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584609413,A041,myQNAPcloud,C003,myQNAPcloud Link,
111,  0,2020-03-19,10:20:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584609611,A041,myQNAPcloud,C003,myQNAPcloud Link,
112,  0,2020-03-19,12:21:38,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584616898,A041,myQNAPcloud,C003,myQNAPcloud Link,
113,  1,2020-03-19,12:36:56,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1584617816,A041,myQNAPcloud,C003,myQNAPcloud Link,
114,  0,2020-03-19,12:42:05,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584618125,A041,myQNAPcloud,C003,myQNAPcloud Link,
115,  0,2020-03-19,13:29:45,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584620985,A041,myQNAPcloud,C003,myQNAPcloud Link,
116,  0,2020-03-19,13:41:39,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584621699,A041,myQNAPcloud,C003,myQNAPcloud Link,
117,  0,2020-03-19,15:04:44,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584626684,A041,myQNAPcloud,C003,myQNAPcloud Link,
118,  0,2020-03-19,15:07:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584626841,A041,myQNAPcloud,C003,myQNAPcloud Link,
119,  0,2020-03-19,16:52:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584633131,A041,myQNAPcloud,C003,myQNAPcloud Link,
120,  0,2020-03-19,17:08:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584634120,A041,myQNAPcloud,C003,myQNAPcloud Link,
121,  0,2020-03-19,17:23:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584634987,A041,myQNAPcloud,C003,myQNAPcloud Link,
122,  0,2020-03-19,17:29:54,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584635394,A041,myQNAPcloud,C003,myQNAPcloud Link,
123,  0,2020-03-19,18:25:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584638703,A041,myQNAPcloud,C003,myQNAPcloud Link,
124,  0,2020-03-19,18:31:01,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584639061,A041,myQNAPcloud,C003,myQNAPcloud Link,
125,  0,2020-03-19,19:18:04,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584641884,A041,myQNAPcloud,C003,myQNAPcloud Link,
126,  0,2020-03-19,19:33:24,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584642804,A041,myQNAPcloud,C003,myQNAPcloud Link,
127,  0,2020-03-19,19:45:45,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584643545,A041,myQNAPcloud,C003,myQNAPcloud Link,
128,  0,2020-03-19,19:47:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584643623,A041,myQNAPcloud,C003,myQNAPcloud Link,
129,  0,2020-03-20,10:02:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584694952,A041,myQNAPcloud,C003,myQNAPcloud Link,
130,  0,2020-03-20,10:08:10,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584695290,A041,myQNAPcloud,C003,myQNAPcloud Link,
131,  0,2020-03-20,11:55:10,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584701710,A041,myQNAPcloud,C003,myQNAPcloud Link,
132,  0,2020-03-20,12:01:45,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584702105,A041,myQNAPcloud,C003,myQNAPcloud Link,
133,  0,2020-03-20,14:12:53,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584709973,A041,myQNAPcloud,C003,myQNAPcloud Link,
134,  0,2020-03-20,14:24:35,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584710675,A041,myQNAPcloud,C003,myQNAPcloud Link,
135,  0,2020-03-20,15:36:28,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584714988,A041,myQNAPcloud,C003,myQNAPcloud Link,
136,  0,2020-03-20,15:37:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584715072,A041,myQNAPcloud,C003,myQNAPcloud Link,
137,  1,2020-03-20,18:23:28,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1584725008,A011,External Device,C002,UPS,
138,  1,2020-03-20,18:23:41,System,127.0.0.1,localhost,[External Device] UPS power restored. Canceled shutdown., 11,1584725021,A011,External Device,C002,UPS,
139,  1,2020-03-20,18:24:10,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1584725050,A011,External Device,C002,UPS,
140,  1,2020-03-20,18:24:22,System,127.0.0.1,localhost,[External Device] UPS power restored. Canceled shutdown., 11,1584725062,A011,External Device,C002,UPS,
141,  2,2020-03-21,09:58:16,admin,192.168.169.135,---,[Users] Failed to log in via user account "admin". Source IP address: 192.168.169.135., 26,1584781096,A015,Users,C002,Login,
142,  0,2020-03-21,10:00:08,admin,192.168.169.135,---,[Users] Edited the permissions of user "TittyNas".,  4,1584781208,A015,Users,C001,General,
143,  0,2020-03-21,10:07:58,admin,192.168.169.135,---,[Users] Edited the permissions of user "TittyNas".,  4,1584781678,A015,Users,C001,General,
144,  0,2020-03-21,10:14:22,admin,192.168.169.135,---,[Users] Edited the permissions of user "TittyNas".,  4,1584782062,A015,Users,C001,General,
145,  0,2020-03-21,11:02:38,admin,192.168.169.135,---,[Users] Created user "Portatile"., 25,1584784958,A015,Users,C001,General,
146,  0,2020-03-21,11:06:32,admin,192.168.169.135,---,[Users] Edited the permissions of user "Portatile".,  4,1584785192,A015,Users,C001,General,
147,  0,2020-03-21,11:08:21,admin,192.168.169.135,---,[Users] Changed the password of user "Portatile".,  2,1584785301,A015,Users,C001,General,
148,  0,2020-03-21,11:12:13,System,127.0.0.1,---,[Users] Created the Home folder of user "Portatile"., 24,1584785533,A015,Users,C001,General,
149,  0,2020-03-21,11:16:41,admin,192.168.169.135,---,[Users] Edited the permissions of user "Portatile".,  4,1584785801,A015,Users,C001,General,
150,  0,2020-03-21,11:26:22,admin,192.168.169.135,---,[Users] Edited the permissions of user "Portatile".,  4,1584786382,A015,Users,C001,General,
151,  0,2020-03-21,14:55:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is unavailable. You cannot use myQNAPcloud Link to access your QNAP device. Error code: 3. Ensure that the NAS is connected to the internet and that the UDP traffic is not blocked., 29,1584798916,A041,myQNAPcloud,C003,myQNAPcloud Link,
152,  0,2020-03-21,14:58:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584799101,A041,myQNAPcloud,C003,myQNAPcloud Link,
153,  0,2020-03-21,15:04:41,System,127.0.0.1,localhost,[Network] LAN 1 link is Down.,  0,1584799481,---,---,---,---,
154,  0,2020-03-21,15:05:13,System,127.0.0.1,localhost,[Network] LAN 1 link is Up.,  0,1584799513,---,---,---,---,
155,  0,2020-03-21,15:06:02,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1584799562,A041,myQNAPcloud,C003,myQNAPcloud Link,
156,  0,2020-03-21,15:09:30,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584799770,A041,myQNAPcloud,C003,myQNAPcloud Link,
157,  0,2020-03-21,15:11:04,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "95.234.137.154"., 15,1584799864,A041,myQNAPcloud,C002,My DDNS,
158,  0,2020-03-21,18:59:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584813583,A041,myQNAPcloud,C003,myQNAPcloud Link,
159,  0,2020-03-21,19:02:34,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584813754,A041,myQNAPcloud,C003,myQNAPcloud Link,
160,  0,2020-03-21,22:44:17,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584827057,A041,myQNAPcloud,C003,myQNAPcloud Link,
161,  0,2020-03-21,22:46:28,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584827188,A041,myQNAPcloud,C003,myQNAPcloud Link,
162,  0,2020-03-22,11:41:44,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584873704,A041,myQNAPcloud,C003,myQNAPcloud Link,
163,  0,2020-03-22,11:47:29,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584874049,A041,myQNAPcloud,C003,myQNAPcloud Link,
164,  0,2020-03-22,17:07:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584893227,A041,myQNAPcloud,C003,myQNAPcloud Link,
165,  0,2020-03-22,17:09:36,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584893376,A041,myQNAPcloud,C003,myQNAPcloud Link,
166,  0,2020-03-22,20:10:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584904240,A041,myQNAPcloud,C003,myQNAPcloud Link,
167,  0,2020-03-22,20:16:55,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584904615,A041,myQNAPcloud,C003,myQNAPcloud Link,
168,  0,2020-03-23,11:42:59,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584960179,A041,myQNAPcloud,C003,myQNAPcloud Link,
169,  0,2020-03-23,11:45:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584960348,A041,myQNAPcloud,C003,myQNAPcloud Link,
170,  0,2020-03-23,16:55:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584978908,A041,myQNAPcloud,C003,myQNAPcloud Link,
171,  0,2020-03-23,17:00:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584979248,A041,myQNAPcloud,C003,myQNAPcloud Link,
172,  0,2020-03-23,19:50:46,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1584989446,A041,myQNAPcloud,C003,myQNAPcloud Link,
173,  0,2020-03-23,19:53:18,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1584989598,A041,myQNAPcloud,C003,myQNAPcloud Link,
174,  0,2020-03-24,09:36:56,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585039016,A041,myQNAPcloud,C003,myQNAPcloud Link,
175,  0,2020-03-24,09:42:47,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585039367,A041,myQNAPcloud,C003,myQNAPcloud Link,
176,  0,2020-03-24,11:32:20,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585045940,A041,myQNAPcloud,C003,myQNAPcloud Link,
177,  0,2020-03-24,11:34:58,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585046098,A041,myQNAPcloud,C003,myQNAPcloud Link,
178,  0,2020-03-24,12:00:26,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585047626,A041,myQNAPcloud,C003,myQNAPcloud Link,
179,  0,2020-03-24,12:03:39,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585047819,A041,myQNAPcloud,C003,myQNAPcloud Link,
180,  0,2020-03-24,14:38:50,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585057130,A041,myQNAPcloud,C003,myQNAPcloud Link,
181,  0,2020-03-24,14:45:24,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585057524,A041,myQNAPcloud,C003,myQNAPcloud Link,
182,  0,2020-03-24,14:46:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585057592,A041,myQNAPcloud,C003,myQNAPcloud Link,
183,  0,2020-03-24,14:48:37,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585057717,A041,myQNAPcloud,C003,myQNAPcloud Link,
184,  0,2020-03-24,18:08:53,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585069733,A041,myQNAPcloud,C003,myQNAPcloud Link,
185,  1,2020-03-24,18:27:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1585070831,A041,myQNAPcloud,C003,myQNAPcloud Link,
186,  0,2020-03-24,19:51:27,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585075887,A041,myQNAPcloud,C003,myQNAPcloud Link,
187,  0,2020-03-25,10:09:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585127391,A041,myQNAPcloud,C003,myQNAPcloud Link,
188,  0,2020-03-25,10:16:34,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585127794,A041,myQNAPcloud,C003,myQNAPcloud Link,
189,  0,2020-03-25,10:17:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585127831,A041,myQNAPcloud,C003,myQNAPcloud Link,
190,  0,2020-03-25,10:23:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585128237,A041,myQNAPcloud,C003,myQNAPcloud Link,
191,  0,2020-03-25,21:29:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585168192,A041,myQNAPcloud,C003,myQNAPcloud Link,
192,  0,2020-03-25,21:30:38,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585168238,A041,myQNAPcloud,C003,myQNAPcloud Link,
193,  0,2020-03-26,18:19:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585243180,A041,myQNAPcloud,C003,myQNAPcloud Link,
194,  0,2020-03-26,18:20:36,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585243236,A041,myQNAPcloud,C003,myQNAPcloud Link,
195,  0,2020-03-26,18:21:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585243303,A041,myQNAPcloud,C003,myQNAPcloud Link,
196,  0,2020-03-26,18:30:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585243816,A041,myQNAPcloud,C003,myQNAPcloud Link,
197,  0,2020-03-26,18:35:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585244116,A041,myQNAPcloud,C003,myQNAPcloud Link,
198,  0,2020-03-26,18:36:01,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585244161,A041,myQNAPcloud,C003,myQNAPcloud Link,
199,  0,2020-03-26,20:59:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585252743,A041,myQNAPcloud,C003,myQNAPcloud Link,
200,  1,2020-03-26,21:18:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1585253896,A041,myQNAPcloud,C003,myQNAPcloud Link,
201,  0,2020-03-27,00:21:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585264863,A041,myQNAPcloud,C003,myQNAPcloud Link,
202,  0,2020-03-27,00:26:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585265181,A041,myQNAPcloud,C003,myQNAPcloud Link,
203,  1,2020-03-27,00:42:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1585266128,A041,myQNAPcloud,C003,myQNAPcloud Link,
204,  0,2020-03-27,03:38:48,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585276728,A041,myQNAPcloud,C005,myQNAPcloud Server,
205,  0,2020-03-27,03:38:52,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585276732,A041,myQNAPcloud,C005,myQNAPcloud Server,
206,  0,2020-03-27,03:38:55,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585276735,A041,myQNAPcloud,C005,myQNAPcloud Server,
207,  0,2020-03-27,03:39:04,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585276744,A041,myQNAPcloud,C005,myQNAPcloud Server,
208,  0,2020-03-27,03:53:59,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585277639,A041,myQNAPcloud,C005,myQNAPcloud Server,
209,  0,2020-03-27,03:54:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585277642,A041,myQNAPcloud,C005,myQNAPcloud Server,
210,  0,2020-03-27,03:54:11,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585277651,A041,myQNAPcloud,C005,myQNAPcloud Server,
211,  0,2020-03-27,03:54:14,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585277654,A041,myQNAPcloud,C005,myQNAPcloud Server,
212,  0,2020-03-27,04:09:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585278549,A041,myQNAPcloud,C005,myQNAPcloud Server,
213,  0,2020-03-27,04:09:12,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585278552,A041,myQNAPcloud,C005,myQNAPcloud Server,
214,  0,2020-03-27,04:09:15,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585278555,A041,myQNAPcloud,C005,myQNAPcloud Server,
215,  0,2020-03-27,04:09:24,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585278564,A041,myQNAPcloud,C005,myQNAPcloud Server,
216,  0,2020-03-27,04:24:21,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585279461,A041,myQNAPcloud,C005,myQNAPcloud Server,
217,  0,2020-03-27,04:24:29,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585279469,A041,myQNAPcloud,C005,myQNAPcloud Server,
218,  0,2020-03-27,04:24:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585279474,A041,myQNAPcloud,C005,myQNAPcloud Server,
219,  0,2020-03-27,04:24:37,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585279477,A041,myQNAPcloud,C005,myQNAPcloud Server,
220,  0,2020-03-27,04:39:30,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585280370,A041,myQNAPcloud,C005,myQNAPcloud Server,
221,  0,2020-03-27,04:39:38,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585280378,A041,myQNAPcloud,C005,myQNAPcloud Server,
222,  0,2020-03-27,04:39:42,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585280382,A041,myQNAPcloud,C005,myQNAPcloud Server,
223,  0,2020-03-27,04:39:45,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585280385,A041,myQNAPcloud,C005,myQNAPcloud Server,
224,  0,2020-03-27,04:54:42,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585281282,A041,myQNAPcloud,C005,myQNAPcloud Server,
225,  0,2020-03-27,04:54:45,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585281285,A041,myQNAPcloud,C005,myQNAPcloud Server,
226,  0,2020-03-27,04:54:48,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585281288,A041,myQNAPcloud,C005,myQNAPcloud Server,
227,  0,2020-03-27,04:54:52,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585281292,A041,myQNAPcloud,C005,myQNAPcloud Server,
228,  0,2020-03-27,05:09:52,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585282192,A041,myQNAPcloud,C005,myQNAPcloud Server,
229,  0,2020-03-27,05:09:55,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585282195,A041,myQNAPcloud,C005,myQNAPcloud Server,
230,  0,2020-03-27,05:09:59,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585282199,A041,myQNAPcloud,C005,myQNAPcloud Server,
231,  0,2020-03-27,05:10:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585282202,A041,myQNAPcloud,C005,myQNAPcloud Server,
232,  0,2020-03-27,05:25:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585283109,A041,myQNAPcloud,C005,myQNAPcloud Server,
233,  0,2020-03-27,05:25:13,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585283113,A041,myQNAPcloud,C005,myQNAPcloud Server,
234,  0,2020-03-27,05:25:16,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585283116,A041,myQNAPcloud,C005,myQNAPcloud Server,
235,  0,2020-03-27,05:25:20,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585283120,A041,myQNAPcloud,C005,myQNAPcloud Server,
236,  0,2020-03-27,05:40:17,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585284017,A041,myQNAPcloud,C005,myQNAPcloud Server,
237,  0,2020-03-27,05:40:20,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585284020,A041,myQNAPcloud,C005,myQNAPcloud Server,
238,  0,2020-03-27,05:40:23,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585284023,A041,myQNAPcloud,C005,myQNAPcloud Server,
239,  0,2020-03-27,05:40:27,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585284027,A041,myQNAPcloud,C005,myQNAPcloud Server,
240,  0,2020-03-27,05:55:30,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585284930,A041,myQNAPcloud,C005,myQNAPcloud Server,
241,  0,2020-03-27,05:55:33,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585284933,A041,myQNAPcloud,C005,myQNAPcloud Server,
242,  0,2020-03-27,05:55:37,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585284937,A041,myQNAPcloud,C005,myQNAPcloud Server,
243,  0,2020-03-27,05:55:40,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585284940,A041,myQNAPcloud,C005,myQNAPcloud Server,
244,  0,2020-03-27,06:10:46,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585285846,A041,myQNAPcloud,C005,myQNAPcloud Server,
245,  0,2020-03-27,06:10:50,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585285850,A041,myQNAPcloud,C005,myQNAPcloud Server,
246,  0,2020-03-27,06:10:53,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585285853,A041,myQNAPcloud,C005,myQNAPcloud Server,
247,  0,2020-03-27,06:11:07,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585285867,A041,myQNAPcloud,C005,myQNAPcloud Server,
248,  0,2020-03-27,06:26:04,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585286764,A041,myQNAPcloud,C005,myQNAPcloud Server,
249,  0,2020-03-27,06:26:08,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585286768,A041,myQNAPcloud,C005,myQNAPcloud Server,
250,  0,2020-03-27,06:26:11,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585286771,A041,myQNAPcloud,C005,myQNAPcloud Server,
251,  0,2020-03-27,06:26:14,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585286774,A041,myQNAPcloud,C005,myQNAPcloud Server,
252,  0,2020-03-27,06:41:19,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585287679,A041,myQNAPcloud,C005,myQNAPcloud Server,
253,  0,2020-03-27,06:41:22,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585287682,A041,myQNAPcloud,C005,myQNAPcloud Server,
254,  0,2020-03-27,06:41:26,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585287686,A041,myQNAPcloud,C005,myQNAPcloud Server,
255,  0,2020-03-27,06:41:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585287694,A041,myQNAPcloud,C005,myQNAPcloud Server,
256,  0,2020-03-27,06:56:30,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585288590,A041,myQNAPcloud,C005,myQNAPcloud Server,
257,  0,2020-03-27,06:56:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585288594,A041,myQNAPcloud,C005,myQNAPcloud Server,
258,  0,2020-03-27,06:56:37,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585288597,A041,myQNAPcloud,C005,myQNAPcloud Server,
259,  0,2020-03-27,06:56:41,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585288601,A041,myQNAPcloud,C005,myQNAPcloud Server,
260,  0,2020-03-27,07:11:47,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585289507,A041,myQNAPcloud,C005,myQNAPcloud Server,
261,  0,2020-03-27,07:11:50,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585289510,A041,myQNAPcloud,C005,myQNAPcloud Server,
262,  0,2020-03-27,07:11:58,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585289518,A041,myQNAPcloud,C005,myQNAPcloud Server,
263,  0,2020-03-27,07:12:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585289522,A041,myQNAPcloud,C005,myQNAPcloud Server,
264,  0,2020-03-27,07:26:50,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585290410,A041,myQNAPcloud,C005,myQNAPcloud Server,
265,  0,2020-03-27,07:26:54,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585290414,A041,myQNAPcloud,C005,myQNAPcloud Server,
266,  0,2020-03-27,07:26:57,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585290417,A041,myQNAPcloud,C005,myQNAPcloud Server,
267,  0,2020-03-27,07:27:00,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585290420,A041,myQNAPcloud,C005,myQNAPcloud Server,
268,  0,2020-03-27,07:42:07,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585291327,A041,myQNAPcloud,C005,myQNAPcloud Server,
269,  0,2020-03-27,07:42:10,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585291330,A041,myQNAPcloud,C005,myQNAPcloud Server,
270,  0,2020-03-27,07:42:13,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585291333,A041,myQNAPcloud,C005,myQNAPcloud Server,
271,  0,2020-03-27,07:42:17,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585291337,A041,myQNAPcloud,C005,myQNAPcloud Server,
272,  0,2020-03-27,07:57:11,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585292231,A041,myQNAPcloud,C005,myQNAPcloud Server,
273,  0,2020-03-27,07:57:14,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585292234,A041,myQNAPcloud,C005,myQNAPcloud Server,
274,  0,2020-03-27,07:57:18,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585292238,A041,myQNAPcloud,C005,myQNAPcloud Server,
275,  0,2020-03-27,07:57:21,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585292241,A041,myQNAPcloud,C005,myQNAPcloud Server,
276,  0,2020-03-27,08:12:23,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585293143,A041,myQNAPcloud,C005,myQNAPcloud Server,
277,  0,2020-03-27,08:12:31,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585293151,A041,myQNAPcloud,C005,myQNAPcloud Server,
278,  0,2020-03-27,08:12:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585293154,A041,myQNAPcloud,C005,myQNAPcloud Server,
279,  0,2020-03-27,08:12:38,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585293158,A041,myQNAPcloud,C005,myQNAPcloud Server,
280,  0,2020-03-27,08:27:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585294054,A041,myQNAPcloud,C005,myQNAPcloud Server,
281,  0,2020-03-27,08:27:37,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585294057,A041,myQNAPcloud,C005,myQNAPcloud Server,
282,  0,2020-03-27,08:27:41,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585294061,A041,myQNAPcloud,C005,myQNAPcloud Server,
283,  0,2020-03-27,08:27:44,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585294064,A041,myQNAPcloud,C005,myQNAPcloud Server,
284,  0,2020-03-27,08:42:47,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585294967,A041,myQNAPcloud,C005,myQNAPcloud Server,
285,  0,2020-03-27,08:42:51,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585294971,A041,myQNAPcloud,C005,myQNAPcloud Server,
286,  0,2020-03-27,08:42:54,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585294974,A041,myQNAPcloud,C005,myQNAPcloud Server,
287,  0,2020-03-27,08:42:57,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585294977,A041,myQNAPcloud,C005,myQNAPcloud Server,
288,  0,2020-03-27,08:57:59,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585295879,A041,myQNAPcloud,C005,myQNAPcloud Server,
289,  0,2020-03-27,08:58:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585295882,A041,myQNAPcloud,C005,myQNAPcloud Server,
290,  0,2020-03-27,08:58:06,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585295886,A041,myQNAPcloud,C005,myQNAPcloud Server,
291,  0,2020-03-27,08:58:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585295889,A041,myQNAPcloud,C005,myQNAPcloud Server,
292,  0,2020-03-27,09:11:22,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is unavailable. You cannot use myQNAPcloud Link to access your QNAP device. Error code: 3. Ensure that the NAS is connected to the internet and that the UDP traffic is not blocked., 29,1585296682,A041,myQNAPcloud,C003,myQNAPcloud Link,
293,  0,2020-03-27,09:12:53,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1585296773,A041,myQNAPcloud,C003,myQNAPcloud Link,
294,  0,2020-03-27,09:13:15,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585296795,A041,myQNAPcloud,C005,myQNAPcloud Server,
295,  0,2020-03-27,09:13:19,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585296799,A041,myQNAPcloud,C005,myQNAPcloud Server,
296,  0,2020-03-27,09:13:22,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585296802,A041,myQNAPcloud,C005,myQNAPcloud Server,
297,  0,2020-03-27,09:13:26,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585296806,A041,myQNAPcloud,C005,myQNAPcloud Server,
298,  0,2020-03-27,09:28:26,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585297706,A041,myQNAPcloud,C005,myQNAPcloud Server,
299,  0,2020-03-27,09:28:30,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585297710,A041,myQNAPcloud,C005,myQNAPcloud Server,
300,  0,2020-03-27,09:28:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585297714,A041,myQNAPcloud,C005,myQNAPcloud Server,
301,  0,2020-03-27,09:28:37,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585297717,A041,myQNAPcloud,C005,myQNAPcloud Server,
302,  0,2020-03-27,09:43:42,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585298622,A041,myQNAPcloud,C005,myQNAPcloud Server,
303,  0,2020-03-27,09:43:50,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585298630,A041,myQNAPcloud,C005,myQNAPcloud Server,
304,  0,2020-03-27,09:43:54,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585298634,A041,myQNAPcloud,C005,myQNAPcloud Server,
305,  0,2020-03-27,09:43:57,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585298637,A041,myQNAPcloud,C005,myQNAPcloud Server,
306,  0,2020-03-27,09:58:55,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585299535,A041,myQNAPcloud,C005,myQNAPcloud Server,
307,  0,2020-03-27,09:58:58,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585299538,A041,myQNAPcloud,C005,myQNAPcloud Server,
308,  0,2020-03-27,09:59:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585299542,A041,myQNAPcloud,C005,myQNAPcloud Server,
309,  0,2020-03-27,09:59:05,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585299545,A041,myQNAPcloud,C005,myQNAPcloud Server,
310,  0,2020-03-27,10:14:05,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585300445,A041,myQNAPcloud,C005,myQNAPcloud Server,
311,  0,2020-03-27,10:14:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585300449,A041,myQNAPcloud,C005,myQNAPcloud Server,
312,  0,2020-03-27,10:14:12,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585300452,A041,myQNAPcloud,C005,myQNAPcloud Server,
313,  0,2020-03-27,10:14:16,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585300456,A041,myQNAPcloud,C005,myQNAPcloud Server,
314,  0,2020-03-27,10:29:15,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585301355,A041,myQNAPcloud,C005,myQNAPcloud Server,
315,  0,2020-03-27,10:29:18,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585301358,A041,myQNAPcloud,C005,myQNAPcloud Server,
316,  0,2020-03-27,10:29:22,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585301362,A041,myQNAPcloud,C005,myQNAPcloud Server,
317,  0,2020-03-27,10:29:28,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585301368,A041,myQNAPcloud,C005,myQNAPcloud Server,
318,  0,2020-03-27,10:44:26,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585302266,A041,myQNAPcloud,C005,myQNAPcloud Server,
319,  0,2020-03-27,10:44:30,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585302270,A041,myQNAPcloud,C005,myQNAPcloud Server,
320,  0,2020-03-27,10:44:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585302274,A041,myQNAPcloud,C005,myQNAPcloud Server,
321,  0,2020-03-27,10:44:38,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585302278,A041,myQNAPcloud,C005,myQNAPcloud Server,
322,  0,2020-03-27,10:59:35,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585303175,A041,myQNAPcloud,C005,myQNAPcloud Server,
323,  0,2020-03-27,10:59:39,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585303179,A041,myQNAPcloud,C005,myQNAPcloud Server,
324,  0,2020-03-27,10:59:43,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585303183,A041,myQNAPcloud,C005,myQNAPcloud Server,
325,  0,2020-03-27,10:59:53,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585303193,A041,myQNAPcloud,C005,myQNAPcloud Server,
326,  0,2020-03-27,11:14:47,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585304087,A041,myQNAPcloud,C005,myQNAPcloud Server,
327,  0,2020-03-27,11:14:50,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585304090,A041,myQNAPcloud,C005,myQNAPcloud Server,
328,  0,2020-03-27,11:14:54,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585304094,A041,myQNAPcloud,C005,myQNAPcloud Server,
329,  0,2020-03-27,11:15:01,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585304101,A041,myQNAPcloud,C005,myQNAPcloud Server,
330,  0,2020-03-27,11:29:58,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585304998,A041,myQNAPcloud,C005,myQNAPcloud Server,
331,  0,2020-03-27,11:30:01,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585305001,A041,myQNAPcloud,C005,myQNAPcloud Server,
332,  0,2020-03-27,11:30:06,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585305006,A041,myQNAPcloud,C005,myQNAPcloud Server,
333,  0,2020-03-27,11:30:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585305009,A041,myQNAPcloud,C005,myQNAPcloud Server,
334,  0,2020-03-27,11:45:10,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585305910,A041,myQNAPcloud,C005,myQNAPcloud Server,
335,  0,2020-03-27,11:45:14,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585305914,A041,myQNAPcloud,C005,myQNAPcloud Server,
336,  0,2020-03-27,11:45:18,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585305918,A041,myQNAPcloud,C005,myQNAPcloud Server,
337,  0,2020-03-27,11:45:27,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585305927,A041,myQNAPcloud,C005,myQNAPcloud Server,
338,  0,2020-03-27,12:00:20,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585306820,A041,myQNAPcloud,C005,myQNAPcloud Server,
339,  0,2020-03-27,12:00:26,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585306826,A041,myQNAPcloud,C005,myQNAPcloud Server,
340,  0,2020-03-27,12:00:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585306834,A041,myQNAPcloud,C005,myQNAPcloud Server,
341,  0,2020-03-27,12:00:39,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585306839,A041,myQNAPcloud,C005,myQNAPcloud Server,
342,  0,2020-03-27,12:15:32,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585307732,A041,myQNAPcloud,C005,myQNAPcloud Server,
343,  0,2020-03-27,12:15:40,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585307740,A041,myQNAPcloud,C005,myQNAPcloud Server,
344,  0,2020-03-27,12:15:44,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585307744,A041,myQNAPcloud,C005,myQNAPcloud Server,
345,  0,2020-03-27,12:15:48,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585307748,A041,myQNAPcloud,C005,myQNAPcloud Server,
346,  0,2020-03-27,12:30:44,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585308644,A041,myQNAPcloud,C005,myQNAPcloud Server,
347,  0,2020-03-27,12:30:47,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585308647,A041,myQNAPcloud,C005,myQNAPcloud Server,
348,  0,2020-03-27,12:30:51,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585308651,A041,myQNAPcloud,C005,myQNAPcloud Server,
349,  0,2020-03-27,12:30:54,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585308654,A041,myQNAPcloud,C005,myQNAPcloud Server,
350,  0,2020-03-27,12:34:24,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585308864,A041,myQNAPcloud,C003,myQNAPcloud Link,
351,  0,2020-03-27,12:39:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585309183,A041,myQNAPcloud,C003,myQNAPcloud Link,
352,  0,2020-03-27,12:46:01,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585309561,A041,myQNAPcloud,C005,myQNAPcloud Server,
353,  0,2020-03-27,12:46:05,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585309565,A041,myQNAPcloud,C005,myQNAPcloud Server,
354,  0,2020-03-27,12:46:13,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585309573,A041,myQNAPcloud,C005,myQNAPcloud Server,
355,  0,2020-03-27,12:46:17,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585309577,A041,myQNAPcloud,C005,myQNAPcloud Server,
356,  0,2020-03-27,12:56:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585310168,A041,myQNAPcloud,C003,myQNAPcloud Link,
357,  1,2020-03-27,12:56:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1585310168,A041,myQNAPcloud,C003,myQNAPcloud Link,
358,  0,2020-03-27,13:01:09,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585310469,A041,myQNAPcloud,C005,myQNAPcloud Server,
359,  0,2020-03-27,13:01:13,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585310473,A041,myQNAPcloud,C005,myQNAPcloud Server,
360,  0,2020-03-27,13:01:17,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585310477,A041,myQNAPcloud,C005,myQNAPcloud Server,
361,  0,2020-03-27,13:01:21,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585310481,A041,myQNAPcloud,C005,myQNAPcloud Server,
362,  0,2020-03-27,13:01:40,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585310500,A041,myQNAPcloud,C003,myQNAPcloud Link,
363,  0,2020-03-27,13:16:23,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585311383,A041,myQNAPcloud,C005,myQNAPcloud Server,
364,  0,2020-03-27,13:16:31,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585311391,A041,myQNAPcloud,C005,myQNAPcloud Server,
365,  0,2020-03-27,13:16:35,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585311395,A041,myQNAPcloud,C005,myQNAPcloud Server,
366,  0,2020-03-27,13:16:44,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585311404,A041,myQNAPcloud,C005,myQNAPcloud Server,
367,  1,2020-03-27,13:17:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1585311451,A041,myQNAPcloud,C003,myQNAPcloud Link,
368,  0,2020-03-27,13:31:34,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585312294,A041,myQNAPcloud,C005,myQNAPcloud Server,
369,  0,2020-03-27,13:31:38,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585312298,A041,myQNAPcloud,C005,myQNAPcloud Server,
370,  0,2020-03-27,13:31:41,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585312301,A041,myQNAPcloud,C005,myQNAPcloud Server,
371,  0,2020-03-27,13:31:45,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585312305,A041,myQNAPcloud,C005,myQNAPcloud Server,
372,  0,2020-03-27,13:46:51,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585313211,A041,myQNAPcloud,C005,myQNAPcloud Server,
373,  0,2020-03-27,13:46:55,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585313215,A041,myQNAPcloud,C005,myQNAPcloud Server,
374,  0,2020-03-27,13:46:58,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585313218,A041,myQNAPcloud,C005,myQNAPcloud Server,
375,  0,2020-03-27,13:47:02,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585313222,A041,myQNAPcloud,C005,myQNAPcloud Server,
376,  0,2020-03-27,14:02:04,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585314124,A041,myQNAPcloud,C005,myQNAPcloud Server,
377,  0,2020-03-27,14:02:07,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585314127,A041,myQNAPcloud,C005,myQNAPcloud Server,
378,  0,2020-03-27,14:02:11,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585314131,A041,myQNAPcloud,C005,myQNAPcloud Server,
379,  0,2020-03-27,14:02:14,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585314134,A041,myQNAPcloud,C005,myQNAPcloud Server,
380,  0,2020-03-27,14:17:45,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the published list. Internet connection error. Error code: 1019999. Try again later., 18,1585315065,A041,myQNAPcloud,C005,myQNAPcloud Server,
381,  0,2020-03-27,14:17:49,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user access code. Internet connection error. Error code: 1019999. Try again later., 20,1585315069,A041,myQNAPcloud,C005,myQNAPcloud Server,
382,  0,2020-03-27,14:17:52,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update the user list. Internet connection error. Error code: 1019999. Try again later., 21,1585315072,A041,myQNAPcloud,C005,myQNAPcloud Server,
383,  0,2020-03-27,14:17:56,System,127.0.0.1,localhost,[myQNAPcloud] Failed to update port mapping. Internet connection error. Error code: 1019999. Try again later., 19,1585315076,A041,myQNAPcloud,C005,myQNAPcloud Server,
384,  1,2020-03-27,14:31:56,System,127.0.0.1,localhost,[myQNAPcloud] Signed out user "Titty/el.titty@gmail.com". Device name: "QnapTitty". Device is missing from cloud server. Error code: 1020001. Sign in again.,  5,1585315916,A041,myQNAPcloud,C007,QNAP Account,
385,  0,2020-04-03,10:02:21,System,127.0.0.1,localhost,[Network] LAN 1 link is Down.,  0,1585900941,---,---,---,---,
386,  1,2020-04-03,10:11:13,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1585901473,A011,External Device,C002,UPS,
387,  0,2020-04-03,10:18:20,System,127.0.0.1,localhost,[Power] System shut down on Fri Apr  3 10:18:18 CEST 2020., 17,1585901900,A007,Power,C001,NAS Power Status,
388,  0,2020-04-03,10:18:35,System,127.0.0.1,localhost,[External Device] USB UPS unplugged., 16,1585901915,A011,External Device,C002,UPS,
389,  0,2020-04-03,17:40:19,System,127.0.0.1,localhost,[Power] System started., 18,1585928419,A007,Power,C001,NAS Power Status,
390,  0,2020-04-03,17:44:35,System,127.0.0.1,localhost,[External Device] USB UPS plugged in., 14,1585928675,A011,External Device,C002,UPS,
391,  0,2020-04-04,11:28:47,admin,192.168.169.135,---,[Shared Folders] Renamed shared folder [Smania] to [Titty_Storage].,  0,1585992527,---,---,---,---,
392,  0,2020-04-04,11:31:34,admin,192.168.169.135,---,[Shared Folders] Renamed shared folder [Titty_Storage] to [Ext_Storage].,  0,1585992694,---,---,---,---,
393,  0,2020-04-04,11:34:44,admin,192.168.169.135,---,[Users] Created user "Mirko"., 25,1585992884,A015,Users,C001,General,
394,  0,2020-04-04,11:35:13,System,127.0.0.1,---,[Users] Created the Home folder of user "Mirko"., 24,1585992913,A015,Users,C001,General,
395,  0,2020-04-04,11:48:04,admin,192.168.169.135,localhost,[myQNAPcloud] User "Titty/el.titty@gmail.com" signed in. Device name: "QnapTitty".,  3,1585993684,A041,myQNAPcloud,C007,QNAP Account,
396,  0,2020-04-04,11:48:34,admin,192.168.169.135,localhost,[myQNAPcloud] Enabled DDNS., 11,1585993714,A041,myQNAPcloud,C002,My DDNS,
397,  0,2020-04-04,11:48:35,System,127.0.0.1,localhost,[myQNAPcloud] Updated WAN IP address to "95.247.242.149"., 42,1585993715,A041,myQNAPcloud,C006,myQNAPcloud Device,
398,  0,2020-04-04,11:48:42,System,127.0.0.1,localhost,[myQNAPcloud] Enabled myQNAPcloud Link., 13,1585993722,A041,myQNAPcloud,C003,myQNAPcloud Link,
399,  0,2020-04-04,11:48:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1585993728,A041,myQNAPcloud,C003,myQNAPcloud Link,
400,  0,2020-04-04,11:48:55,admin,192.168.169.135,localhost,[myQNAPcloud] Changed device access control mode to "Private".,  7,1585993735,A041,myQNAPcloud,C006,myQNAPcloud Device,
401,  0,2020-04-04,11:49:04,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585993744,A041,myQNAPcloud,C003,myQNAPcloud Link,
402,  0,2020-04-04,11:49:05,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1585993745,A041,myQNAPcloud,C003,myQNAPcloud Link,
403,  0,2020-04-04,11:49:37,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1585993777,A041,myQNAPcloud,C003,myQNAPcloud Link,
404,  0,2020-04-04,11:54:25,System,127.0.0.1,localhost,[Notification Center] Added Push Service: "Xiaomi".,  5,1585994065,A008,Notification Center,C001,Service Account and Device Pairing,
405,  0,2020-04-04,17:08:15,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586012895,A041,myQNAPcloud,C003,myQNAPcloud Link,
406,  0,2020-04-04,17:08:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586012931,A041,myQNAPcloud,C003,myQNAPcloud Link,
407,  0,2020-04-04,18:03:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586016201,A041,myQNAPcloud,C003,myQNAPcloud Link,
408,  0,2020-04-04,18:06:55,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586016415,A041,myQNAPcloud,C003,myQNAPcloud Link,
409,  0,2020-04-04,18:07:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586016468,A041,myQNAPcloud,C003,myQNAPcloud Link,
410,  0,2020-04-04,18:11:22,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586016682,A041,myQNAPcloud,C003,myQNAPcloud Link,
411,  0,2020-04-05,19:33:41,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586108021,A041,myQNAPcloud,C003,myQNAPcloud Link,
412,  0,2020-04-05,19:36:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586108203,A041,myQNAPcloud,C003,myQNAPcloud Link,
413,  0,2020-04-05,19:38:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586108287,A041,myQNAPcloud,C003,myQNAPcloud Link,
414,  0,2020-04-05,19:40:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586108457,A041,myQNAPcloud,C003,myQNAPcloud Link,
415,  0,2020-04-05,20:50:54,admin,95.247.242.149,localhost,[App Center] Uninstalled QmailAgent., 21,1586112654,A039,App Center,C001,App Installation,
416,  0,2020-04-05,20:51:01,admin,95.247.242.149,localhost,[App Center] Started Qsync Central., 22,1586112661,A039,App Center,C002,App Status Change,
417,  0,2020-04-05,20:54:32,admin,95.247.242.149,---,[Users] Created user "Babbo"., 25,1586112872,A015,Users,C001,General,
418,  0,2020-04-05,20:55:38,admin,95.247.242.149,---,[Users] Edited the permissions of user "Babbo".,  4,1586112938,A015,Users,C001,General,
419,  0,2020-04-05,20:58:36,admin,95.247.242.149,---,[Qsync Central] Stopped.,  1,1586113116,A213,Qsync Central,C001,Qsync Central Status,
420,  0,2020-04-05,20:59:04,System,127.0.0.1,---,[Users] Deleted the Home folder of user "Babbo"., 12,1586113144,A015,Users,C001,General,
421,  0,2020-04-05,20:59:11,admin,95.247.242.149,---,[Users] Deleted user "Babbo".,  6,1586113151,A015,Users,C001,General,
422,  0,2020-04-06,12:31:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586169117,A041,myQNAPcloud,C003,myQNAPcloud Link,
423,  0,2020-04-06,12:34:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586169256,A041,myQNAPcloud,C003,myQNAPcloud Link,
424,  0,2020-04-06,15:29:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586179772,A041,myQNAPcloud,C003,myQNAPcloud Link,
425,  0,2020-04-06,15:34:05,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586180045,A041,myQNAPcloud,C003,myQNAPcloud Link,
426,  0,2020-04-06,15:34:35,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586180075,A041,myQNAPcloud,C003,myQNAPcloud Link,
427,  0,2020-04-06,15:35:27,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586180127,A041,myQNAPcloud,C003,myQNAPcloud Link,
428,  0,2020-04-06,15:36:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586180192,A041,myQNAPcloud,C003,myQNAPcloud Link,
429,  0,2020-04-06,15:48:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586180912,A041,myQNAPcloud,C003,myQNAPcloud Link,
430,  0,2020-04-06,18:27:17,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586190437,A041,myQNAPcloud,C003,myQNAPcloud Link,
431,  0,2020-04-06,18:28:54,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586190534,A041,myQNAPcloud,C003,myQNAPcloud Link,
432,  0,2020-04-06,18:57:47,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586192267,A041,myQNAPcloud,C003,myQNAPcloud Link,
433,  0,2020-04-06,19:05:43,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586192743,A041,myQNAPcloud,C003,myQNAPcloud Link,
434,  0,2020-04-07,15:00:26,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586264426,A041,myQNAPcloud,C003,myQNAPcloud Link,
435,  0,2020-04-07,15:06:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586264763,A041,myQNAPcloud,C003,myQNAPcloud Link,
436,  0,2020-04-07,23:18:49,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586294329,A041,myQNAPcloud,C003,myQNAPcloud Link,
437,  0,2020-04-07,23:25:30,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586294730,A041,myQNAPcloud,C003,myQNAPcloud Link,
438,  0,2020-04-08,07:20:29,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586323229,A041,myQNAPcloud,C003,myQNAPcloud Link,
439,  1,2020-04-08,07:37:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 39,1586324228,A041,myQNAPcloud,C003,myQNAPcloud Link,
440,  0,2020-04-08,08:05:54,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586325954,A041,myQNAPcloud,C003,myQNAPcloud Link,
441,  0,2020-04-08,19:59:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586368756,A041,myQNAPcloud,C003,myQNAPcloud Link,
442,  0,2020-04-08,20:01:33,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586368893,A041,myQNAPcloud,C003,myQNAPcloud Link,
443,  0,2020-04-09,13:51:03,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586433063,A041,myQNAPcloud,C003,myQNAPcloud Link,
444,  0,2020-04-09,13:59:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586433547,A041,myQNAPcloud,C003,myQNAPcloud Link,
445,  0,2020-04-09,14:53:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586436812,A041,myQNAPcloud,C003,myQNAPcloud Link,
446,  0,2020-04-09,14:55:32,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586436932,A041,myQNAPcloud,C003,myQNAPcloud Link,
447,  0,2020-04-09,18:29:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586449771,A041,myQNAPcloud,C003,myQNAPcloud Link,
448,  0,2020-04-09,18:30:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586449848,A041,myQNAPcloud,C003,myQNAPcloud Link,
449,  1,2020-04-09,20:24:26,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1586456666,A011,External Device,C002,UPS,
450,  1,2020-04-09,20:25:00,System,127.0.0.1,localhost,[External Device] UPS power restored. Canceled shutdown., 11,1586456700,A011,External Device,C002,UPS,
451,  2,2020-04-10,01:09:08,admin,110.20.148.14,---,[Users] Failed to log in via user account "admin". Source IP address: 110.20.148.14., 26,1586473748,A015,Users,C002,Login,
452,  0,2020-04-10,15:15:25,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586524525,A041,myQNAPcloud,C003,myQNAPcloud Link,
453,  0,2020-04-10,15:17:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586524628,A041,myQNAPcloud,C003,myQNAPcloud Link,
454,  0,2020-04-10,16:50:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586530207,A041,myQNAPcloud,C003,myQNAPcloud Link,
455,  0,2020-04-10,16:58:35,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586530715,A041,myQNAPcloud,C003,myQNAPcloud Link,
456,  0,2020-04-11,14:57:55,System,127.0.0.1,localhost,[App Center] Installed LicenseCenter 1.4.16 in "/mnt/ext/opt/LicenseCenter"., 46,1586609875,A039,App Center,C001,App Installation,
457,  0,2020-04-11,14:58:08,System,127.0.0.1,localhost,[App Center] LicenseCenter enabled., 47,1586609888,A039,App Center,C001,App Installation,
458,  0,2020-04-11,14:58:38,System,127.0.0.1,localhost,[App Center] Installed QcloudSSLCertificate 2.2.18 in "/mnt/ext/opt/QcloudSSLCertificate"., 46,1586609918,A039,App Center,C001,App Installation,
459,  0,2020-04-11,14:58:45,System,127.0.0.1,localhost,[App Center] QcloudSSLCertificate enabled., 47,1586609925,A039,App Center,C001,App Installation,
460,  0,2020-04-13,04:52:24,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586746344,A041,myQNAPcloud,C003,myQNAPcloud Link,
461,  0,2020-04-13,04:53:22,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586746402,A041,myQNAPcloud,C003,myQNAPcloud Link,
462,  0,2020-04-13,08:49:45,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586760585,A041,myQNAPcloud,C003,myQNAPcloud Link,
463,  0,2020-04-13,08:51:35,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586760695,A041,myQNAPcloud,C003,myQNAPcloud Link,
464,  0,2020-04-13,19:31:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586799081,A041,myQNAPcloud,C003,myQNAPcloud Link,
465,  0,2020-04-13,19:36:58,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586799418,A041,myQNAPcloud,C003,myQNAPcloud Link,
466,  0,2020-04-14,16:27:51,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586874471,A041,myQNAPcloud,C003,myQNAPcloud Link,
467,  0,2020-04-14,16:33:15,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586874795,A041,myQNAPcloud,C003,myQNAPcloud Link,
468,  0,2020-04-15,13:20:02,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1586949602,A041,myQNAPcloud,C003,myQNAPcloud Link,
469,  0,2020-04-15,13:25:34,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1586949934,A041,myQNAPcloud,C003,myQNAPcloud Link,
470,  0,2020-04-16,15:45:07,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587044707,A041,myQNAPcloud,C003,myQNAPcloud Link,
471,  0,2020-04-16,15:50:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587045057,A041,myQNAPcloud,C003,myQNAPcloud Link,
472,  1,2020-04-16,18:28:31,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1587054511,A011,External Device,C002,UPS,
473,  1,2020-04-16,18:28:39,System,127.0.0.1,localhost,[External Device] UPS power restored. Canceled shutdown., 11,1587054519,A011,External Device,C002,UPS,
474,  0,2020-04-17,16:34:02,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587134042,A041,myQNAPcloud,C003,myQNAPcloud Link,
475,  0,2020-04-17,16:39:31,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587134371,A041,myQNAPcloud,C003,myQNAPcloud Link,
476,  0,2020-04-18,07:21:12,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587187272,A041,myQNAPcloud,C003,myQNAPcloud Link,
477,  0,2020-04-18,07:23:33,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587187413,A041,myQNAPcloud,C003,myQNAPcloud Link,
478,  0,2020-04-18,12:21:08,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587205268,A041,myQNAPcloud,C003,myQNAPcloud Link,
479,  0,2020-04-18,12:27:18,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587205638,A041,myQNAPcloud,C003,myQNAPcloud Link,
480,  2,2020-04-19,18:52:17,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315137,A015,Users,C002,Login,
481,  2,2020-04-19,18:52:20,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315140,A015,Users,C002,Login,
482,  2,2020-04-19,18:52:22,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315142,A015,Users,C002,Login,
483,  2,2020-04-19,18:52:24,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315144,A015,Users,C002,Login,
484,  1,2020-04-19,18:52:26,System,127.0.0.1,---,[Security] Added IP address "188.127.239.77" to IP block list. Duration: forever.,  2,1587315146,A004,Security,C001,Security Level,
485,  2,2020-04-19,18:52:27,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315147,A015,Users,C002,Login,
486,  2,2020-04-19,18:52:29,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315149,A015,Users,C002,Login,
487,  2,2020-04-19,18:52:32,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315152,A015,Users,C002,Login,
488,  2,2020-04-19,18:52:34,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315154,A015,Users,C002,Login,
489,  2,2020-04-19,18:52:36,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315156,A015,Users,C002,Login,
490,  2,2020-04-19,18:52:38,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315158,A015,Users,C002,Login,
491,  2,2020-04-19,18:52:41,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315161,A015,Users,C002,Login,
492,  2,2020-04-19,18:52:43,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315163,A015,Users,C002,Login,
493,  2,2020-04-19,18:52:45,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315165,A015,Users,C002,Login,
494,  2,2020-04-19,18:52:48,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315168,A015,Users,C002,Login,
495,  2,2020-04-19,18:52:50,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315170,A015,Users,C002,Login,
496,  2,2020-04-19,18:52:52,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315172,A015,Users,C002,Login,
497,  2,2020-04-19,18:52:54,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315174,A015,Users,C002,Login,
498,  2,2020-04-19,18:52:57,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315177,A015,Users,C002,Login,
499,  2,2020-04-19,18:52:59,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315179,A015,Users,C002,Login,
500,  2,2020-04-19,18:53:01,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315181,A015,Users,C002,Login,
501,  2,2020-04-19,18:53:03,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315183,A015,Users,C002,Login,
502,  2,2020-04-19,18:53:06,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315186,A015,Users,C002,Login,
503,  2,2020-04-19,18:53:08,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315188,A015,Users,C002,Login,
504,  2,2020-04-19,18:53:10,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315190,A015,Users,C002,Login,
505,  2,2020-04-19,18:53:13,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315193,A015,Users,C002,Login,
506,  2,2020-04-19,18:53:15,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315195,A015,Users,C002,Login,
507,  2,2020-04-19,18:53:17,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315197,A015,Users,C002,Login,
508,  2,2020-04-19,18:53:20,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315200,A015,Users,C002,Login,
509,  2,2020-04-19,18:53:22,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315202,A015,Users,C002,Login,
510,  2,2020-04-19,18:53:24,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315204,A015,Users,C002,Login,
511,  2,2020-04-19,18:53:26,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315206,A015,Users,C002,Login,
512,  2,2020-04-19,18:53:29,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315209,A015,Users,C002,Login,
513,  2,2020-04-19,18:53:31,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315211,A015,Users,C002,Login,
514,  2,2020-04-19,18:53:33,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315213,A015,Users,C002,Login,
515,  2,2020-04-19,18:53:36,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315216,A015,Users,C002,Login,
516,  2,2020-04-19,18:53:38,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315218,A015,Users,C002,Login,
517,  2,2020-04-19,18:53:40,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315220,A015,Users,C002,Login,
518,  2,2020-04-19,18:53:43,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315223,A015,Users,C002,Login,
519,  2,2020-04-19,18:53:45,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315225,A015,Users,C002,Login,
520,  2,2020-04-19,18:53:47,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315227,A015,Users,C002,Login,
521,  2,2020-04-19,18:53:49,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315229,A015,Users,C002,Login,
522,  2,2020-04-19,18:53:52,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315232,A015,Users,C002,Login,
523,  2,2020-04-19,18:53:54,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315234,A015,Users,C002,Login,
524,  2,2020-04-19,18:53:56,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315236,A015,Users,C002,Login,
525,  2,2020-04-19,18:53:59,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315239,A015,Users,C002,Login,
526,  2,2020-04-19,18:54:01,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315241,A015,Users,C002,Login,
527,  2,2020-04-19,18:54:03,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315243,A015,Users,C002,Login,
528,  2,2020-04-19,18:54:05,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315245,A015,Users,C002,Login,
529,  2,2020-04-19,18:54:08,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315248,A015,Users,C002,Login,
530,  2,2020-04-19,18:54:10,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315250,A015,Users,C002,Login,
531,  2,2020-04-19,18:54:12,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315252,A015,Users,C002,Login,
532,  2,2020-04-19,18:54:14,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315254,A015,Users,C002,Login,
533,  2,2020-04-19,18:54:16,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315256,A015,Users,C002,Login,
534,  2,2020-04-19,18:54:19,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315259,A015,Users,C002,Login,
535,  2,2020-04-19,18:54:21,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315261,A015,Users,C002,Login,
536,  2,2020-04-19,18:54:23,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315263,A015,Users,C002,Login,
537,  2,2020-04-19,18:54:26,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315266,A015,Users,C002,Login,
538,  2,2020-04-19,18:54:28,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315268,A015,Users,C002,Login,
539,  2,2020-04-19,18:54:30,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315270,A015,Users,C002,Login,
540,  2,2020-04-19,18:54:33,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315273,A015,Users,C002,Login,
541,  2,2020-04-19,18:54:35,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315275,A015,Users,C002,Login,
542,  2,2020-04-19,18:54:37,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315277,A015,Users,C002,Login,
543,  2,2020-04-19,18:54:39,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315279,A015,Users,C002,Login,
544,  2,2020-04-19,18:54:42,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315282,A015,Users,C002,Login,
545,  2,2020-04-19,18:54:44,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315284,A015,Users,C002,Login,
546,  2,2020-04-19,18:54:46,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315286,A015,Users,C002,Login,
547,  2,2020-04-19,18:54:49,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315289,A015,Users,C002,Login,
548,  2,2020-04-19,18:54:51,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315291,A015,Users,C002,Login,
549,  2,2020-04-19,18:54:53,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315293,A015,Users,C002,Login,
550,  2,2020-04-19,18:54:55,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315295,A015,Users,C002,Login,
551,  2,2020-04-19,18:54:58,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315298,A015,Users,C002,Login,
552,  2,2020-04-19,18:55:00,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315300,A015,Users,C002,Login,
553,  2,2020-04-19,18:55:02,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315302,A015,Users,C002,Login,
554,  2,2020-04-19,18:55:05,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315305,A015,Users,C002,Login,
555,  2,2020-04-19,18:55:07,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315307,A015,Users,C002,Login,
556,  2,2020-04-19,18:55:09,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315309,A015,Users,C002,Login,
557,  2,2020-04-19,18:55:12,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315312,A015,Users,C002,Login,
558,  2,2020-04-19,18:55:14,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315314,A015,Users,C002,Login,
559,  2,2020-04-19,18:55:16,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315316,A015,Users,C002,Login,
560,  2,2020-04-19,18:55:19,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315319,A015,Users,C002,Login,
561,  2,2020-04-19,18:55:21,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315321,A015,Users,C002,Login,
562,  2,2020-04-19,18:55:23,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315323,A015,Users,C002,Login,
563,  2,2020-04-19,18:55:26,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315326,A015,Users,C002,Login,
564,  2,2020-04-19,18:55:28,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315328,A015,Users,C002,Login,
565,  2,2020-04-19,18:55:30,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315330,A015,Users,C002,Login,
566,  2,2020-04-19,18:55:32,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315332,A015,Users,C002,Login,
567,  2,2020-04-19,18:55:35,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315335,A015,Users,C002,Login,
568,  2,2020-04-19,18:55:37,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315337,A015,Users,C002,Login,
569,  2,2020-04-19,18:55:39,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315339,A015,Users,C002,Login,
570,  2,2020-04-19,18:55:41,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315341,A015,Users,C002,Login,
571,  2,2020-04-19,18:55:44,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315344,A015,Users,C002,Login,
572,  2,2020-04-19,18:55:46,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315346,A015,Users,C002,Login,
573,  2,2020-04-19,18:55:48,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315348,A015,Users,C002,Login,
574,  2,2020-04-19,18:55:51,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315351,A015,Users,C002,Login,
575,  2,2020-04-19,18:55:53,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315353,A015,Users,C002,Login,
576,  2,2020-04-19,18:55:55,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315355,A015,Users,C002,Login,
577,  2,2020-04-19,18:55:58,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315358,A015,Users,C002,Login,
578,  2,2020-04-19,18:56:00,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315360,A015,Users,C002,Login,
579,  2,2020-04-19,18:56:02,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315362,A015,Users,C002,Login,
580,  2,2020-04-19,18:56:04,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315364,A015,Users,C002,Login,
581,  2,2020-04-19,18:56:07,admin,188.127.239.77,---,[Users] Failed to log in via user account "admin". Source IP address: 188.127.239.77., 26,1587315367,A015,Users,C002,Login,
582,  0,2020-04-21,01:21:05,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587424865,A041,myQNAPcloud,C003,myQNAPcloud Link,
583,  0,2020-04-21,01:21:42,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587424902,A041,myQNAPcloud,C003,myQNAPcloud Link,
584,  0,2020-04-21,07:20:15,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587446415,A041,myQNAPcloud,C003,myQNAPcloud Link,
585,  0,2020-04-21,07:23:34,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587446614,A041,myQNAPcloud,C003,myQNAPcloud Link,
586,  0,2020-04-21,13:19:16,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is unavailable. You cannot use myQNAPcloud Link to access your QNAP device. Error code: 3. Ensure that the NAS is connected to the internet and that the UDP traffic is not blocked., 29,1587467956,A041,myQNAPcloud,C003,myQNAPcloud Link,
587,  0,2020-04-21,13:21:09,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1587468069,A041,myQNAPcloud,C003,myQNAPcloud Link,
588,  0,2020-04-21,13:21:25,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587468085,A041,myQNAPcloud,C003,myQNAPcloud Link,
589,  0,2020-04-21,13:21:51,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "79.45.186.166"., 15,1587468111,A041,myQNAPcloud,C002,My DDNS,
590,  0,2020-04-21,13:26:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587468412,A041,myQNAPcloud,C003,myQNAPcloud Link,
591,  0,2020-04-22,13:54:20,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587556460,A041,myQNAPcloud,C003,myQNAPcloud Link,
592,  0,2020-04-22,13:54:57,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587556497,A041,myQNAPcloud,C003,myQNAPcloud Link,
593,  0,2020-04-23,08:10:25,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587622225,A041,myQNAPcloud,C003,myQNAPcloud Link,
594,  0,2020-04-23,08:11:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587622281,A041,myQNAPcloud,C003,myQNAPcloud Link,
595,  0,2020-04-24,10:42:50,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587717770,A041,myQNAPcloud,C003,myQNAPcloud Link,
596,  0,2020-04-24,10:43:58,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587717838,A041,myQNAPcloud,C003,myQNAPcloud Link,
597,  0,2020-04-25,14:05:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587816352,A041,myQNAPcloud,C003,myQNAPcloud Link,
598,  0,2020-04-25,14:06:23,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587816383,A041,myQNAPcloud,C003,myQNAPcloud Link,
599,  0,2020-04-25,22:12:44,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is unavailable. You cannot use myQNAPcloud Link to access your QNAP device. Error code: 3. Ensure that the NAS is connected to the internet and that the UDP traffic is not blocked., 29,1587845564,A041,myQNAPcloud,C003,myQNAPcloud Link,
600,  0,2020-04-25,22:13:31,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "79.16.181.224"., 15,1587845611,A041,myQNAPcloud,C002,My DDNS,
601,  0,2020-04-25,22:14:13,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587845653,A041,myQNAPcloud,C003,myQNAPcloud Link,
602,  0,2020-04-25,22:14:37,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1587845677,A041,myQNAPcloud,C003,myQNAPcloud Link,
603,  0,2020-04-25,22:19:48,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587845988,A041,myQNAPcloud,C003,myQNAPcloud Link,
604,  0,2020-04-26,10:31:18,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587889878,A041,myQNAPcloud,C003,myQNAPcloud Link,
605,  0,2020-04-26,10:36:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587890212,A041,myQNAPcloud,C003,myQNAPcloud Link,
606,  0,2020-04-26,20:30:01,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587925801,A041,myQNAPcloud,C003,myQNAPcloud Link,
607,  0,2020-04-26,20:35:28,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587926128,A041,myQNAPcloud,C003,myQNAPcloud Link,
608,  0,2020-04-27,07:50:52,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587966652,A041,myQNAPcloud,C003,myQNAPcloud Link,
609,  0,2020-04-27,07:52:38,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587966758,A041,myQNAPcloud,C003,myQNAPcloud Link,
610,  0,2020-04-27,16:52:13,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1587999133,A041,myQNAPcloud,C003,myQNAPcloud Link,
611,  0,2020-04-27,16:55:09,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1587999309,A041,myQNAPcloud,C003,myQNAPcloud Link,
612,  0,2020-04-27,22:41:17,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1588020077,A041,myQNAPcloud,C003,myQNAPcloud Link,
613,  0,2020-04-27,22:47:19,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1588020439,A041,myQNAPcloud,C003,myQNAPcloud Link,
614,  0,2020-04-28,02:17:25,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is unavailable. You cannot use myQNAPcloud Link to access your QNAP device. Error code: 3. Ensure that the NAS is connected to the internet and that the UDP traffic is not blocked., 29,1588033045,A041,myQNAPcloud,C003,myQNAPcloud Link,
615,  0,2020-04-28,02:18:20,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is unavailable. You cannot manage or share the file(s)/folder(s) stored on this QNAP device via myQNAPcloud web site. Error code: -1., 40,1588033100,A041,myQNAPcloud,C003,myQNAPcloud Link,
616,  0,2020-04-28,02:19:21,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1588033161,A041,myQNAPcloud,C003,myQNAPcloud Link,
617,  0,2020-04-28,02:23:19,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "87.9.182.88"., 15,1588033399,A041,myQNAPcloud,C002,My DDNS,
618,  0,2020-04-28,02:23:36,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1588033416,A041,myQNAPcloud,C003,myQNAPcloud Link,
619,  1,2020-04-28,07:03:41,System,127.0.0.1,localhost,[External Device] Detected UPS power loss. Shutting down NAS in 5 minute(s).,  8,1588050221,A011,External Device,C002,UPS,
620,  0,2020-04-28,07:10:39,System,127.0.0.1,localhost,[Power] System shut down on Tue Apr 28 07:10:38 CEST 2020., 17,1588050639,A007,Power,C001,NAS Power Status,
621,  0,2020-04-28,07:10:52,System,127.0.0.1,localhost,[External Device] USB UPS unplugged., 16,1588050652,A011,External Device,C002,UPS,
622,  0,2020-04-28,08:19:54,System,127.0.0.1,localhost,[Power] System started., 18,1588054794,A007,Power,C001,NAS Power Status,
623,  0,2020-04-28,08:22:46,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "87.9.180.71"., 15,1588054966,A041,myQNAPcloud,C002,My DDNS,
624,  0,2020-04-28,08:23:59,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1588055039,A041,myQNAPcloud,C003,myQNAPcloud Link,
625,  0,2020-04-28,08:24:11,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1588055051,A041,myQNAPcloud,C003,myQNAPcloud Link,
626,  0,2020-04-28,08:24:12,System,127.0.0.1,localhost,[External Device] USB UPS plugged in., 14,1588055052,A011,External Device,C002,UPS,
627,  2,2020-04-28,09:03:45,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057425,A049,Hardware Status,C009,I/O Ports,
628,  2,2020-04-28,09:04:27,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057467,A049,Hardware Status,C009,I/O Ports,
629,  2,2020-04-28,09:05:09,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057509,A049,Hardware Status,C009,I/O Ports,
630,  2,2020-04-28,09:05:53,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057553,A049,Hardware Status,C009,I/O Ports,
631,  2,2020-04-28,09:06:35,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057595,A049,Hardware Status,C009,I/O Ports,
632,  0,2020-04-28,09:06:50,System,127.0.0.1,localhost,[Storage Manager] Finished hot-removing disk "Host: Disk 2".,521,1588057610,A002,Storage Manager,C001,Volume,
633,  1,2020-04-28,09:06:52,System,127.0.0.1,localhost,[Storage Manager] RAID group "1" is degraded. Volume: NAS.,103,1588057612,A002,Storage Manager,C001,Volume,
634,  2,2020-04-28,09:06:54,System,127.0.0.1,localhost,[Hardware Status] "Host: Disk 2": Disconnected., 37,1588057614,A049,Hardware Status,C008,Drives,
635,  2,2020-04-28,09:07:16,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057636,A049,Hardware Status,C009,I/O Ports,
636,  0,2020-04-28,09:08:32,admin,192.168.169.135,---,[Power] Shutting down NAS.,  2,1588057712,A007,Power,C001,NAS Power Status,
637,  2,2020-04-28,09:09:57,System,127.0.0.1,localhost,[Hardware Status] Failed to access the installed drive. Check the drive for errors., 41,1588057797,A049,Hardware Status,C009,I/O Ports,
638,  0,2020-04-28,09:10:43,System,127.0.0.1,localhost,[Power] System shut down on Tue Apr 28 09:10:42 CEST 2020., 17,1588057843,A007,Power,C001,NAS Power Status,
639,  0,2020-04-28,09:28:33,System,127.0.0.1,localhost,[Storage Manager] Started rebuilding RAID group "1". Volume: NAS, Priority: Default., 86,1588058913,A002,---,C001,---,
640,  0,2020-04-28,09:32:51,System,127.0.0.1,localhost,[App Center] LicenseCenter 1.4.16 has been installed in /mnt/ext/opt/LicenseCenter successfully., 46,1588059171,A039,---,C001,---,
641,  0,2020-04-28,09:32:58,System,127.0.0.1,localhost,[App Center] LicenseCenter enabled., 47,1588059178,A039,---,C001,---,
642,  0,2020-04-28,09:34:36,System,127.0.0.1,localhost,[App Center] Installed Notification Center 1.0.1881 in "/mnt/ext/opt/NotificationCenter"., 46,1588059276,A039,App Center,C001,App Installation,
643,  0,2020-04-28,09:34:37,System,127.0.0.1,localhost,[App Center] Notification Center enabled., 47,1588059277,A039,App Center,C001,App Installation,
644,  0,2020-04-28,09:34:50,System,127.0.0.1,localhost,[App Center] Installed QcloudSSLCertificate 2.2.18 in "/mnt/ext/opt/QcloudSSLCertificate"., 46,1588059290,A039,App Center,C001,App Installation,
645,  0,2020-04-28,09:34:57,System,127.0.0.1,localhost,[App Center] QcloudSSLCertificate enabled., 47,1588059297,A039,App Center,C001,App Installation,
646,  0,2020-04-28,09:35:10,System,127.0.0.1,localhost,[App Center] Resource Monitor enabled.,  0,1588059310,---,---,---,---,
647,  0,2020-04-28,09:35:11,System,127.0.0.1,localhost,[App Center] Resource Monitor 1.1.0 installation succeeded.,  0,1588059311,---,---,---,---,
648,  0,2020-04-28,09:35:24,System,127.0.0.1,localhost,[App Center] SSD Profiling Tool 1.0.1185 installation succeeded.,  0,1588059324,---,---,---,---,
649,  0,2020-04-28,09:36:07,System,127.0.0.1,localhost,[App Center] Enabled Qboost., 47,1588059367,A039,App Center,C001,App Installation,
650,  0,2020-04-28,09:36:09,System,127.0.0.1,localhost,[App Center] Installed Qboost 1.2.0 in "/mnt/ext/opt/Qboost"., 46,1588059369,A039,App Center,C001,App Installation,
651,  0,2020-04-28,09:38:02,System,127.0.0.1,localhost,[myQNAPcloud] DDNS updated WAN IP address to "82.186.111.114"., 15,1588059482,A041,myQNAPcloud,C002,My DDNS,
652,  0,2020-04-28,09:39:19,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready., 28,1588059559,A041,myQNAPcloud,C003,myQNAPcloud Link,
653,  0,2020-04-28,09:39:23,System,127.0.0.1,localhost,[myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready., 31,1588059563,A041,myQNAPcloud,C003,myQNAPcloud Link,
Done. Return value is 0


============= [ CONNECTION LOG ]  [ TOP ]

/sbin/conn_log_tool -qv 

Query database...
conn_id,conn_type,conn_date,conn_time,conn_user,conn_ip,conn_comp,conn_res,conn_serv,conn_action,conn_app,


============= [ STORAGE V2 ]  [ TOP ]

/sbin/pvs

  PV         VG    Fmt  Attr PSize PFree
  /dev/md1   vg288 lvm2 a--  5.45t    0 

/sbin/pvdisplay

  --- Physical volume ---
  PV Name               /dev/md1
  VG Name               vg288
  PV Size               5.45 TiB / not usable 4.94 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              1428360
  Free PE               0
  Allocated PE          1428360
  PV UUID               A3r8xI-ZtSn-ARpg-AAUe-atx8-KTWE-YW9y6Z
   

/sbin/vgs 

  VG    #PV #LV #SN Attr   VSize VFree
  vg288   1   2   0 wz--n- 5.45t    0 

/sbin/vgdisplay

  --- Volume group ---
  VG Name               vg288
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  44
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               1
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               5.45 TiB
  PE Size               4.00 MiB
  Total PE              1428360
  Alloc PE / Size       1428360 / 5.45 TiB
  Free  PE / Size       0 / 0   
  VG UUID               7C3dt2-4N03-kVFn-mcyP-Mksy-nPTS-6A19h6
   

/sbin/lvs -a

  LV    VG    Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  lv1   vg288 -wi-ao----  5.39t                                                    
  lv544 vg288 -wi------- 55.91g                                                    

/sbin/lvdisplay --map

  --- Logical volume ---
  LV Path                /dev/vg288/lv544
  LV Name                lv544
  VG Name                vg288
  LV UUID                M8s8St-JMQe-un1l-m3L9-iSFC-Ag09-0DqbbZ
  LV Write Access        read/write
  LV Creation host, time Qnap-231, 2020-02-09 17:22:21 +0100
  LV Status              NOT available
  LV Size                55.91 GiB
  Current LE             14312
  Segments               2
  Allocation             inherit
  Read ahead sectors     768
   
  --- Segments ---
  Logical extents 0 to 14282:
    Type		linear
    Physical volume	/dev/md1
    Physical extents	0 to 14282
   
  Logical extents 14283 to 14311:
    Type		linear
    Physical volume	/dev/md1
    Physical extents	1428331 to 1428359
   
   
  --- Logical volume ---
  LV Path                /dev/vg288/lv1
  LV Name                lv1
  VG Name                vg288
  LV UUID                YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0
  LV Write Access        read/write
  LV Creation host, time Qnap-231, 2020-02-09 17:22:32 +0100
  LV Status              available
  # open                 1
  LV Size                5.39 TiB
  Current LE             1414048
  Segments               1
  Allocation             inherit
  Read ahead sectors     768
  Block device           253:1
   
  --- Segments ---
  Logical extents 0 to 1414047:
    Type		linear
    Physical volume	/dev/md1
    Physical extents	14283 to 1428330
   
   


============= [ DEVICE MAPPER ]  [ TOP ]

/sbin/dmsetup status 
vg288-lv1: 0 11583881216 linear 
cachedev1: 0 11583881216 flashcache conf:
	flashcache_cg2vdev CG0 YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0
	flashcache_vdev2cg YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0 CG0
	flashcache_disk2vdev /dev/mapper/vg288-lv1 YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0
	flashcache_vdev2disk YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0 /dev/mapper/vg288-lv1
	flashcache_plugin CG0 NO
	flashcache_enabled /dev/mapper/vg288-lv1 DISABLED
	total blocks(0), cached blocks(0), cache percent(0)

/sbin/dmsetup ls --tree 

cachedev1 (253:0)
 `-vg288-lv1 (253:1)
    `- (9:1)


============= [ FILESYSTEM INFO ]  [ TOP ]

/sbin/tune2fs -l /dev/mapper/cachedev1
tune2fs 1.42.13 (17-May-2015)
Filesystem volume name:   NAS
Last mounted on:          /share/CACHEDEV1_DATA
Filesystem UUID:          85405dce-2a4f-459a-a2a2-f605deab8283
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags:         unsigned_directory_hash rehashed
Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              180998144
Block count:              1447985152
Reserved block count:     131072
Free blocks:              1112313148
Free inodes:              180915476
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      678
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         4096
Inode blocks per group:   256
RAID stride:              16
RAID stripe width:        32
Flex block group size:    16
Filesystem created:       Sun Feb  9 17:22:36 2020
Last mount time:          Tue Apr 28 09:28:28 2020
Last write time:          Tue Apr 28 09:28:28 2020
Mount count:              5
Maximum mount count:      -1
Last checked:             Fri Mar 13 13:35:49 2020
Check interval:           0 ()
Lifetime writes:          918 GB
Reserved blocks uid:      0 (user admin)
Reserved blocks gid:      0 (group administrators)
First inode:              11
Inode size:	          256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
First orphan inode:       64749675
Default directory hash:   half_md4
Directory Hash Seed:      7a6c805e-e4e4-4061-985d-d03be2a1f740
Directory Hash Rev:       1
Directory Magic Number:   0x514E4150
Journal backup:           inode blocks


============= [ QCLI_STORAGE INFO ]  [ TOP ]

/sbin/qcli_storage -d 
Enclosure  Port  Sys_Name     Type      Size      Alias          Signature   Partitions  Model  
NAS_HOST   1     /dev/sda     HDD:data  5.46 TB   --             QNAP FLEX   5           WDC WD60EFAX-68SHWN0
NAS_HOST   2     /dev/sdb     HDD:data  5.46 TB   --             QNAP FLEX   5           WDC WD60EFAX-68SHWN0


============= [ VOLUME INFO ]  [ TOP ]


df

Filesystem           1k-blocks      Used Available Use% Mounted on
none                     61440     44368     17072  72% /
devtmpfs                238640        12    238628   0% /dev
tmpfs                    65536       672     64864   1% /tmp
tmpfs                   245376         8    245368   0% /dev/shm
tmpfs                    16384      1152     15232   7% /share
/dev/md9                521684    287908    233776  55% /mnt/HDA_ROOT
cgroup_root             245376         0    245376   0% /sys/fs/cgroup
/dev/md13               443368    336800    106568  76% /mnt/ext
/dev/mapper/cachedev15746307024 1313832132 4431950604  23% /share/CACHEDEV1_DATA
tmpfs                    16384        68     16316   0% /share/CACHEDEV1_DATA/.samba/lock/msg.lock
tmpfs                    16384         0     16384   0% /mnt/ext/opt/samba/private/msg.sock
tmpfs                     1024         0      1024   0% /mnt/rf/nd
tmpfs                    16384         0     16384   0% /share/NFSv=4
/dev/mapper/cachedev15746307024 1313832132 4431950604  23% /share/NFSv=4/Multimedia
/dev/mapper/cachedev15746307024 1313832132 4431950604  23% /share/NFSv=4/Public
tmpfs                   245376      1640    243736   1% /mnt/diag

mount

none on /new_root type tmpfs (rw,mode=0755,size=200M)
/proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /tmp type tmpfs (rw,size=64M)
tmpfs on /dev/shm type tmpfs (rw)
tmpfs on /share type tmpfs (rw,size=16M)
none on /proc/bus/usb type usbfs (rw)
/dev/md9 on /mnt/HDA_ROOT type ext3 (rw,data=ordered)
cgroup_root on /sys/fs/cgroup type tmpfs (rw)
/dev/md13 on /mnt/ext type ext3 (rw,data=ordered)
/dev/mapper/cachedev1 on /share/CACHEDEV1_DATA type ext4 (rw,usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,data_err=abort,delalloc,acl)
tmpfs on /share/CACHEDEV1_DATA/.samba/lock/msg.lock type tmpfs (rw,size=16M)
tmpfs on /mnt/ext/opt/samba/private/msg.sock type tmpfs (rw,size=16M)
tmpfs on /mnt/rf/nd type tmpfs (rw,size=1m)
nfsd on /proc/fs/nfsd type nfsd (rw)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
tmpfs on /share/NFSv=4 type tmpfs (rw,size=16M)
/share/CACHEDEV1_DATA/Multimedia on /share/NFSv=4/Multimedia type none (rw,bind)
/share/CACHEDEV1_DATA/Public on /share/NFSv=4/Public type none (rw,bind)
tmpfs on /mnt/diag type tmpfs (rw)


============= [ PROCESS INFO ]  [ TOP ]

top -Q0

CPU Number: 3
CPU Usage:  44.0  49.9  38.3 
    1 admin                                S        600     0  0.0  0.1 init
    2 admin                                SW         0     0  0.0  0.0 kthreadd
    3 admin                                DWN        0     2  0.0  0.0 cpu1_hotplug_th
    4 admin                                SW         0     2  0.4  0.0 ksoftirqd/0
    5 admin                                SW         0     2 11.0  0.0 kworker/0:0
    7 admin                                SW         0     2  0.0  0.0 migration/0
    8 admin                                SW         0     2  0.0  0.0 migration/1
    9 admin                                SW         0     2  0.0  0.0 kworker/1:0
   10 admin                                SW         0     2  0.0  0.0 ksoftirqd/1
   11 admin                                SWN        0     2  0.0  0.0 cpuset
   12 admin                                SW<        0     2  0.0  0.0 khelper
   13 admin                                SW         0     2  0.0  0.0 kdevtmpfs
   14 admin                                SW         0     2  1.9  0.0 kworker/1:1
   15 admin                                SW         0     2  0.0  0.0 sync_supers
   16 admin                                SW         0     2  0.0  0.0 bdi-default
   17 admin                                SW<        0     2  0.0  0.0 kintegrityd
   18 admin                                SW<        0     2  0.0  0.0 kblockd
   19 admin                                SW<        0     2  0.0  0.0 ata_sff
   20 admin                                SW         0     2  0.0  0.0 khubd
   21 admin                                SW<        0     2  0.0  0.0 md
   22 admin                                SW<        0     2  0.0  0.0 cfg80211
   23 admin                                SW<        0     2  0.0  0.0 rpciod
   25 admin                                SWN        0     2  0.0  0.0 kswapd0
   26 admin                                SWN        0     2  0.0  0.0 ksmd
   27 admin                                SW         0     2  0.0  0.0 fsnotify_mark
   28 admin                                SW<        0     2  0.0  0.0 nfsiod
   29 admin                                SW<        0     2  0.0  0.0 crypto
   50 admin                                SW         0     2  0.0  0.0 ocf_0
   51 admin                                SW         0     2  0.0  0.0 ocf_ret_0
   52 admin                                SW         0     2  0.0  0.0 ocf_1
   53 admin                                SW         0     2  0.0  0.0 ocf_ret_1
   54 admin                                SW         0     2  0.0  0.0 scsi_eh_0
   55 admin                                SW         0     2  0.0  0.0 scsi_eh_1
   58 admin                                SW         0     2  0.0  0.0 scsi_eh_2
   59 admin                                SW         0     2  0.0  0.0 scsi_eh_3
   61 admin                                SW         0     2  0.0  0.0 kworker/u:4
   62 admin                                SW<        0     2  0.0  0.0 comcerto_spi.0
   63 admin                                SW<        0     2  0.0  0.0 dwc_otg
   65 admin                                SW<        0     2  0.0  0.0 kmpathd
   66 admin                                SW<        0     2  0.0  0.0 kmpath_handlerd
  286 admin                                SW         0     2  0.0  0.0 mtdblock0
  287 admin                                SW         0     2  0.0  0.0 mtdblock1
  289 admin                                SW         0     2  0.0  0.0 mtdblock2
  290 admin                                SW         0     2  0.0  0.0 mtdblock3
  291 admin                                SW         0     2  0.0  0.0 mtdblock4
  292 admin                                SW         0     2  0.0  0.0 mtdblock5
  293 admin                                SW         0     2  0.0  0.0 mtdblock6
  383 admin                                SW<        0     2  0.0  0.0 dm_bufio_cache
  417 admin                                S <      552     1  0.0  0.1 udevd
  459 admin                                DW         0     2  0.4  0.0 pfe_ctrl_timer
  624 admin                                SW         0     2  0.0  0.0 md9_raid1
  639 admin                                SW         0     2  0.0  0.0 kjournald
  653 admin                                SW         0     2  0.0  0.0 md13_raid1
  665 admin                                S       1360     1  0.0  0.2 root
  668 admin                                SW         0     2  0.0  0.0 flush-9:9
 1121 admin                                S       4200     1  1.9  0.8 hal_daemon
 1188 admin                                SW         0     2  0.0  0.0 md256_raid1
 1208 admin                                SW         0     2  0.0  0.0 md322_raid1
 1244 admin                                RW         0     2 11.9  0.0 md1_raid1
 1278 admin                                SW         0     2  0.0  0.0 flush-9:13
 1379 admin                                SW         0     2  0.0  0.0 kjournald
 1390 admin                                DWN        0     2  5.2  0.0 md1_resync
 1426 admin                                SW<        0     2  0.0  0.0 kdmflush
 1477 admin                                SW<        0     2  0.0  0.0 kdmflush
 1530 admin                                SW         0     2  0.0  0.0 jbd2/dm-0-8
 1531 admin                                SW<        0     2  0.0  0.0 ext4-dio-unwrit
 1609 admin                                SW         0     2  0.0  0.0 flush-253:0
 1642 admin                                S        716     1  0.0  0.1 lvmetad
 2522 admin                                SW         0     2  0.0  0.0 fnotify
 2531 admin                                S <      460     1  0.0  0.0 qwatchdogd
 3043 admin                                S       1176     1  0.0  0.2 modagent
 4058 admin                                SW<        0     2  0.0  0.0 bond0
 4427 admin                                S N      224     1  0.0  0.0 dhcpcd
 6336 admin                                SW<        0     2  0.0  0.0 iscsi_eh
 6367 admin                                S        464     1  0.4  0.0 iscsid
 6368 admin                                S <     2012     1  0.0  0.4 iscsid
 6379 admin                                S       1928     1  0.0  0.3 vdd_control
 6913 admin                                S        42M     1  0.0  8.8 mysqld
 7046 admin                                S       3136     1  0.4  0.6 qpkgd
 7255 admin                                S       1592     1  0.0  0.3 ql_daemon
 7785 admin                                S        18M     1  0.0  3.8 ncdb
 7999 admin                                S       4848     1  0.0  0.9 ncd
10377 guest                                S       1140     1  0.0  0.2 dbus-daemon
10636 admin                                S       1360     1  0.0  0.2 qboostd
10923 admin                                S       5672     1  0.0  1.1 php-fpm
10926 httpdusr                             S       4516 10923  0.0  0.9 php-fpm
10927 httpdusr                             S       4516 10923  0.0  0.9 php-fpm
10963 admin                                S       3920     1  0.0  0.7 apache
10966 httpdusr                             S       2072 10963  0.0  0.4 apache
10971 httpdusr                             S       3436 10963  0.0  0.7 apache
11268 admin                                S       1508     1  0.0  0.3 cupsd
11647 admin                                S       4152     1  0.0  0.8 winbindd
11710 admin                                S <     5780     1  0.0  1.1 smbd
11712 admin                                S       2852 11710  0.0  0.5 smbd-notifyd
11713 admin                                S       2672 11710  0.0  0.5 cleanupd
11719 admin                                S       5244 11647  0.0  1.0 winbindd
11722 admin                                S       2260 11647  0.0  0.4 winbindd
11724 admin                                S       2884 11647  0.0  0.5 winbindd
11725 admin                                S       3156 11710  0.0  0.6 lpqd
11726 admin                                S       3028 11710  0.0  0.6 mdssd-master
11727 admin                                S       2892 11726  0.0  0.5 mdssd-child
11728 admin                                S       2892 11726  0.0  0.5 mdssd-child
11729 admin                                S       2892 11726  0.0  0.5 mdssd-child
11730 admin                                S       2892 11726  0.0  0.5 mdssd-child
11731 admin                                S       2892 11726  0.0  0.5 mdssd-child
11783 admin                                S       2592     1  0.0  0.5 nmbd
11849 admin                                S       8088     1  0.0  1.6 python2
11858 admin                                S       2080     1  0.0  0.4 qooba
12003 admin                                S       4080     1  0.4  0.8 _thttpd_
12061 admin                                S       1096     1  0.0  0.2 screen
12064 admin                                S       4336 12061  0.0  0.8 mytranscodesvr
12107 admin                                S       5696     1  0.0  1.1 php-fpm-proxy
12131 admin                                S <     3976     1  0.0  0.8 apache_proxy
12320 admin                                S       2448     1  0.4  0.4 /mnt/HDA_ROOT/usr/local/sbin/remote_folder_daemon
12361 httpdusr                             S       1540     1  0.0  0.3 lpb_scheduler
12415 admin                                S       1996     1  0.0  0.4 genthd
12804 admin                                S       2144     1  0.0  0.4 upsutil
12867 admin                                SW<        0     2  0.0  0.0 krfcommd
12893 admin                                S       1292     1  0.0  0.2 ntpdated
12947 admin                                S       1196     1  0.0  0.2 sshd
12967 admin                                S       1404     1  0.0  0.2 bluetoothd
12978 admin                                S        404     1  0.0  0.0 agent
12989 admin                                S        716     1  0.0  0.1 crond
13133 guest                                S       1676     1  0.0  0.3 avahi-daemon
13196 admin                                S       1552     1  0.0  0.3 lunportman
13402 admin                                S        560     1  0.0  0.1 gen_bandwidth
13531 admin                                S       1120     1  0.0  0.2 klogd.sh
13542 admin                                S       2380     1  0.0  0.4 qLogEngined
13545 admin                                S       1752     1  0.0  0.3 qShield
13548 admin                                S       1668     1  0.4  0.3 qsyslogd
13550 admin                                S       1956     1  0.0  0.3 qNoticeEngined
13662 admin                                S        444 13531  0.0  0.0 dd
14043 admin                                S       1944     1  0.0  0.3 sdmd
14070 admin                                S       4656     1  0.0  0.9 porter
14194 admin                                S       2292     1  0.0  0.4 qsyncman
14425 admin                                S        752     1  0.0  0.1 portmap
14540 admin                                S       1332     1  0.0  0.2 pn_daemon
14780 admin                                S        216     1  0.0  0.0 rpc.rquotad
15046 admin                                S       2624     1  0.0  0.5 rpc.mountd
15185 admin                                SW         0     2  0.0  0.0 lockd
15186 admin                                SW<        0     2  0.0  0.0 nfsd4
15188 admin                                SW<        0     2  0.0  0.0 nfsd4_callbacks
15190 admin                                SW         0     2  0.0  0.0 nfsd
15191 admin                                SW         0     2  0.0  0.0 nfsd
15192 admin                                SW         0     2  0.0  0.0 nfsd
15193 admin                                SW         0     2  0.0  0.0 nfsd
15194 admin                                SW         0     2  0.0  0.0 nfsd
15195 admin                                SW         0     2  0.0  0.0 nfsd
15196 admin                                SW         0     2  0.0  0.0 nfsd
15197 admin                                SW         0     2  0.0  0.0 nfsd
15299 admin                                S       1640     1  0.0  0.3 rpc.idmapd
15327 admin                                S       2168     1  0.0  0.4 rpc.statd
15591 admin                                SW         0     2  0.0  0.0 kworker/0:1
16040 admin                                S       1724     1  0.0  0.3 daemon_mgr
16244 admin                                S       1216     1  0.0  0.2 qdesk_soldier
17512 admin                                S <     3216 12131  0.0  0.6 apache_proxy
17636 admin                                S <     9020 12131  0.4  1.8 apache_proxy
17792 admin                                S        17M     1  0.0  3.7 tunnelagent
17814 admin                                S       1312     1  0.0  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/tunnel_agent_daemon.sh
18223 admin                                S        15M     1  1.9  3.2 tutk_agent
18277 admin                                S       2692     1  0.0  0.5 upnpcd
18487 admin                                S        540     1  0.0  0.1 getty
18745 admin                                S       2972     1  0.0  0.6 bcclient
18771 admin                                S       1324     1  0.4  0.2 upnpd
18890 admin                                SW         0     2  0.0  0.0 kworker/u:0
19276 admin                                S       3720     1  0.0  0.7 apache-dav
19280 admin                                S       3192 19276  0.0  0.6 apache-dav
19302 admin                                S       4020     1  0.0  0.8 apache_proxys
19306 admin                                S       3312 19302  0.0  0.6 apache_proxys
19311 admin                                S       4332 19302  0.0  0.8 apache_proxys
25189 admin                                SW         0     2  0.0  0.0 kworker/0:2
27265 admin                                S        544 17814  0.0  0.1 inotifywait
28214 admin                                S        10M 12107  0.0  2.1 php-fpm-proxy
28249 admin                                S       9188 12107  0.0  1.8 php-fpm-proxy
28277 admin                                S       9456 12107  0.0  1.9 php-fpm-proxy
28892 admin                                S       8336 28277  0.0  1.6 get_log
30606 admin                                Z          0 12003  0.0  0.0 sysRequest.cgi
30993 admin                                Z          0 12003  0.0  0.0 manaRequest.cgi
30994 admin                                Z          0 12003  0.0  0.0 manaRequest.cgi
30995 admin                                Z          0 12003  0.0  0.0 chartReq.cgi
31309 admin                                Z          0 12003  0.0  0.0 appRequest.cgi
31699 admin                                Z          0 12003  0.0  0.0 appRequest.cgi
31748 admin                                Z          0 12003  0.0  0.0 manaRequest.cgi
31858 admin                                Z          0 12003  0.0  0.0 manaRequest.cgi
31867 admin                                R        824 28892  1.9  0.1 top
31869 admin                                Z          0 12003  4.7  0.0 appRequest.cgi
31878 admin                                S        388 16244  0.0  0.0 sleep


============= [ RAID SUPERBLOCK INFO ]  [ TOP ]

#======================= [ ENCLOSURE_0 PORT_1 ] ===========
/dev/sda3:
          Magic : a92b4efc
        Version : 1.0
    Feature Map : 0x0
     Array UUID : f4c79e63:9aaa0aa0:5fdde1ad:2b438825
           Name : 1
  Creation Time : Sun Feb  9 17:22:05 2020
     Raid Level : raid1
   Raid Devices : 2

 Avail Dev Size : 11701135240 (5579.54 GiB 5990.98 GB)
     Array Size : 5850567616 (5579.54 GiB 5990.98 GB)
  Used Dev Size : 11701135232 (5579.54 GiB 5990.98 GB)
   Super Offset : 11701135504 sectors
   Unused Space : before=0 sectors, after=264 sectors
          State : clean
    Device UUID : 1271f974:586d89b8:b1732556:8f32d8d6

    Update Time : Tue Apr 28 09:53:28 2020
  Bad Block Log : 512 entries available at offset -8 sectors
       Checksum : c3c0f27e - correct
         Events : 259


   Device Role : Active device 0
   Array State : AA ('A' == active, '.' == missing, 'R' == replacing)
#======================= [ ENCLOSURE_0 PORT_2 ] ===========
/dev/sdb3:
          Magic : a92b4efc
        Version : 1.0
    Feature Map : 0x2
     Array UUID : f4c79e63:9aaa0aa0:5fdde1ad:2b438825
           Name : 1
  Creation Time : Sun Feb  9 17:22:05 2020
     Raid Level : raid1
   Raid Devices : 2

 Avail Dev Size : 11701135240 (5579.54 GiB 5990.98 GB)
     Array Size : 5850567616 (5579.54 GiB 5990.98 GB)
  Used Dev Size : 11701135232 (5579.54 GiB 5990.98 GB)
   Super Offset : 11701135504 sectors
Recovery Offset : 0 sectors
   Unused Space : before=0 sectors, after=264 sectors
          State : clean
    Device UUID : 261d352c:fbee3012:87f65fed:108051fc

    Update Time : Tue Apr 28 09:53:28 2020
  Bad Block Log : 512 entries available at offset -8 sectors
       Checksum : 9157f090 - correct
         Events : 259


   Device Role : Active device 1
   Array State : AA ('A' == active, '.' == missing, 'R' == replacing)


============= [ MD CHECKER ]  [ TOP ]


Welcome to MD superblock checker (v1.4) - have a nice day~

Scanning system...

HAL firmware detected!
Scanning Enclosure 0...

RAID metadata found!
UUID:		f4c79e63:9aaa0aa0:5fdde1ad:2b438825
Level:		raid1
Devices:	2
Name:		md1
Chunk Size:	-
md Version:	1.0
Creation Time:	Feb 9 17:22:05 2020
Status:         ONLINE (md1) [U_]
===============================================================================
 Disk | Device | # | Status |   Last Update Time   | Events | Array State
===============================================================================
   1  /dev/sda3  0   Active   Apr 28 09:53:41 2020      261   AA                       
   2  /dev/sdb3  1  Rebuild   Apr 28 09:53:41 2020      261   AA                       
===============================================================================



============= [ IFCONFIG ]  [ TOP ]

/sbin/ifconfig

eth0      Link encap:Ethernet  HWaddr 00:08:9B:EC:75:C7  
          inet addr:10.24.53.135  Bcast:10.24.53.255  Mask:255.255.255.128
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:16035 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14610 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5229240 (4.9 MiB)  TX bytes:11635666 (11.0 MiB)

eth1      Link encap:Ethernet  HWaddr 00:08:9B:EC:75:C8  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:14606 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14606 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:9116089 (8.6 MiB)  TX bytes:9116089 (8.6 MiB)



============= [ ROUTING TABLE ]  [ TOP ]

/sbin/route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.24.53.253    0.0.0.0         UG    0      0        0 eth0
10.24.53.128    0.0.0.0         255.255.255.128 U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo


============= [ MODULE/IRQ INFO ]  [ TOP ]

lsmod

Module                  Size  Used by    Tainted: P  
rfcomm 45792 0 - Live 0x83aa5000
btusb 10299 0 - Live 0x83a9e000
bluetooth 183288 10 rfcomm,btusb, Live 0x83a5f000
iscsi_tcp 6994 0 - Live 0x83a59000 (O)
libiscsi_tcp 11572 1 iscsi_tcp, Live 0x83a52000 (O)
libiscsi 29241 2 iscsi_tcp,libiscsi_tcp, Live 0x83a44000 (O)
scsi_transport_iscsi 29947 3 iscsi_tcp,libiscsi, Live 0x83a35000 (O)
fbdisk 16259 0 - Live 0x83a2d000 (O)
bonding 88733 0 - Live 0x83a0c000
bridge 62440 0 - Live 0x839f3000
stp 1134 1 bridge, Live 0x839ef000
ipv6 228727 74 - Live 0x839a4000
uvcvideo 50699 0 - Live 0x83991000
v4l2_common 4841 0 - Live 0x8398b000
videodev 68622 2 uvcvideo,v4l2_common, Live 0x83972000
v4l2_int_device 1600 0 - Live 0x8396e000
snd_usb_caiaq 30073 0 - Live 0x83961000
snd_usb_audio 74323 0 - Live 0x83942000
hid_logitech_dj 8303 0 - Live 0x8393b000
hid_logitech 4503 0 - Live 0x83936000
snd_usbmidi_lib 21032 1 snd_usb_audio, Live 0x8392c000
snd_hwdep 4124 1 snd_usb_audio, Live 0x83927000
snd_seq_midi 3278 0 - Live 0x83923000
snd_rawmidi 12906 3 snd_usb_caiaq,snd_usbmidi_lib,snd_seq_midi, Live 0x8391a000
fnotify 24729 0 - Live 0x8390f000 (P)
udf 75218 0 - Live 0x838dd000
isofs 27637 0 - Live 0x838d1000
sysinfo 783 0 - Live 0x83829000 (O)
pfe 571217 0 - Live 0x83764000 (O)
ufsd 523015 0 - Live 0x836cf000 (P)
jnl 36811 1 ufsd, Live 0x836c0000 (O)
pl2303 11244 0 - Live 0x836b9000
usbserial 22292 1 pl2303, Live 0x836ad000
flashcache 3184 1 - Live 0x836a9000 (O)
qdm_main 4624 0 - Live 0x836a4000
dm_thin_pool 24889 0 - Live 0x83698000
dm_persistent_data 38512 1 dm_thin_pool, Live 0x83688000
dm_bufio 15798 1 dm_persistent_data, Live 0x8367f000
hal_netlink 2660 0 - Live 0x8367b000 (O)
m86xxx_elp 121757 0 - Live 0x83656000 (O)
i2c_algo_bit 4565 0 - Live 0x83651000
raid_class 2814 0 - Live 0x8364d000
usb_storage 34486 0 - Live 0x8363c000
xhci_hcd 72393 0 - Live 0x83623000
usblp 8513 0 - Live 0x8361c000
usbhid 34779 1 hid_logitech_dj, Live 0x8360d000
comcerto_nand 7966 0 - Live 0x83608000
m25p80 11828 0 - Live 0x83600000

/proc/interrupts


============= [ MEMORY INFO ]  [ TOP ]

/proc/meminfo


============= [ BLOCK DEVICE PARTITION ]  [ TOP ]

/proc/partitions


============= [ MD STATUS ]  [ TOP ]

/proc/mdstat


============= [ CONFIGURATION - uLinux.conf ]  [ TOP ]

/etc/config/uLinux.conf


============= [ CONFIGURATION - smb.conf ]  [ TOP ]

/etc/config/smb.conf


============= [ CONFIGURATION - volume.conf ]  [ TOP ]

/etc/volume.conf


============= [ CONFIGURATION - ssdcache.conf ]  [ TOP ]

/etc/config/ssdcache.conf


============= [ CONFIGURATION - qdm.conf ]  [ TOP ]

/etc/config/qdm.conf


============= [ CONFIGURATION - qlvm.conf ]  [ TOP ]

/etc/config/qlvm.conf


============= [ CONFIGURATION - raid.conf ]  [ TOP ]

/etc/config/raid.conf


============= [ CONFIGURATION - enclosure_X.conf ]  [ TOP ]
/bin/cat /etc/enclosure_X.conf

/etc/enclosure_0.conf


============= [ CONFIGURATION - lvm_conf ]  [ TOP ]

/etc/config/lvm


============= [ CONFIGURATION - iscsi_conf ]  [ TOP ]

/etc/config/iscsi_trgt.conf

/etc/config/iscsi-init.conf 


============= [ CONFIGURATION - HDA_ROOT/.conf ]  [ TOP ]

/mnt/HDA_ROOT/.conf


============= [ CONFIGURATION - HDA_ROOT/.config/ ]  [ TOP ]

/mnt/HDA_ROOT/.config/.434_vswitch.conf
/mnt/HDA_ROOT/.config/.vswitch_migrate.conf


============= [ CONFIGURATION - qpkg.conf ]  [ TOP ]

/etc/config/qpkg.conf


============= [ crontab ]  [ TOP ]

/etc/config/crontab


============= [ netmgr.conf ]  [ TOP ]

/etc/config/netmgr.conf


============= [ vswitch.conf ]  [ TOP ]

/etc/config/vswitch.conf


============= [ nat.conf ]  [ TOP ]

/etc/config/nat.conf


============= [ if_dhcpd.conf ]  [ TOP ]

/etc/config/if_dhcpd.conf


============= [ DEVICE MAP ]  [ TOP ]

/proc/devices


============= [ PCI DEVICE ]  [ TOP ]

/proc/bus/pci/devices


============= [ USB DEVICE ]  [ TOP ]

/proc/bus/usb/devices


============= [ Bridge interface list ]  [ TOP ]

/sbin/brctl show



============= [ SSD CACHE ]  [ TOP ]

/proc/flashcache/CG0/flashcache_stats

/proc/flashcache/CG0/flashcache_errors

/proc/flashcache/CG0/flashcache_iosize_hist

/sbin/dmsetup table

vg288-lv1: 0 11583881216 linear 9:1 117008384
cachedev1: 0 11583881216 flashcache conf:
	flashcache_cg2vdev CG0 YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0
	flashcache_vdev2cg YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0 CG0
	flashcache_disk2vdev /dev/mapper/vg288-lv1 YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0
	flashcache_vdev2disk YpXJJo-JZdB-KFkI-NgIO-T3fp-q043-D8CaU0 /dev/mapper/vg288-lv1
	flashcache_plugin CG0 NO
	flashcache_enabled /dev/mapper/vg288-lv1 DISABLED
	total blocks(0), cached blocks(0), cache percent(0)


/sbin/sysctl -a|grep flashcache



============= [ STORAGE LOG ]  [ TOP ]

/var/log/storage_lib.log
/var/log/storage_util.log


============= [ HAL LOG ]  [ TOP ]

/var/log/hal_app.log
/var/log/hal_daemon.log
/var/log/hal_daemon.log.bak
/var/log/hal_lib.log
/var/log/hal_lib.log.bak
/var/log/hal_util_net.log


============= [ iSCSI LOG ]  [ TOP ]



============= [ SDMD LOG ]  [ TOP ]

/var/log/SDMD.log


============= [ FORCE_KILL_IN_SHUTDOWN LOG ]  [ TOP ]

/etc/logs/.force_kill_in_shutdown.log


============= [ LOG - .qid.log ]  [ TOP ]

/tmp/.qid.log


============= [ LOG - .porter.log ]  [ TOP ]

/tmp/.porter.log


============= [ LOG - .player.log ]  [ TOP ]

/tmp/.player.log


============= [ LOG - netmgr ]  [ TOP ]

/tmp/netmgr.log


============= [ LOG - netmgr_event_log ]  [ TOP ]

/tmp/netmgr_event_log


============= [ LOG - nvsdjcmd ]  [ TOP ]

/tmp/nvsdjcmd.log


============= [ LOG - udev.log ]  [ TOP ]

/var/log/udev.log


============= [ nm ]  [ TOP ]

/etc/config/nm.conf


============= [ nm_nat ]  [ TOP ]

/etc/config/nm_nat.conf


============= [ nm_dhcpd ]  [ TOP ]

/etc/config/nm_dhcpd.conf


============= [ nm_curr ]  [ TOP ]

/var/run/network/nm.curr


============= [ staticroute ]  [ TOP ]

/etc/config/staticroute.conf


============= [ ext_if ]  [ TOP ]

/etc/config/ext_if.conf


============= [ dhclient ]  [ TOP ]

/etc/config/dhclient


============= [ staticroute6 ]  [ TOP ]

/etc/config/staticroute6.conf


============= [ dhclient6 ]  [ TOP ]

/etc/config/dhclient6


============= [ if_radvd.conf ]  [ TOP ]

/etc/config/if_radvd.conf


============= [ radvd ]  [ TOP ]

/etc/radvd.conf


============= [ dhcp ]  [ TOP ]

/etc/dhcp


============= [ LOG - /var/log/network ]  [ TOP ]

/var/log/network


============= [ LOG - /tmp/smart ]  [ TOP ]

/tmp/smart


============= [ LOG - /tmp/em ]  [ TOP ]

/tmp/em


============= [ LOG - /tmp/usbdebug ]  [ TOP ]

/tmp/usbdebug


============= [ LOG - vm_log ]  [ TOP ]

/vm_log


============= [hal_app --se_enum]  [ TOP ]

========================================================================================================
enc_id enc_parent_sys_id enc_sys_id wwn vendor model status protocol disk_no fan_no cpu_fan_no temp_no gpio_no
0	root	root		QNAP	TS-231	0	0	2	1	0	0	0	1
========================================================================================================
========================================================================================================
enc_id enc_parent_sys_id enc_sys_id wwn vendor model status protocol disk_no fan_no cpu_fan_no temp_no gpio_no
32	root	root_boot		QNAP	BOOT	0	-1	1	0	0	0	0	0
========================================================================================================
========================================================================================================
enc_id enc_parent_sys_id enc_sys_id wwn vendor model status protocol disk_no fan_no cpu_fan_no temp_no gpio_no
33	root	root_usb		QNAP	USB	0	2	3	0	0	0	0	0
========================================================================================================
========================================================================================================
enc_id enc_parent_sys_id enc_sys_id wwn vendor model status protocol disk_no fan_no cpu_fan_no temp_no gpio_no
34	root	root_esata		QNAP	ESATA	0	1	1	0	0	0	0	0
========================================================================================================


============= [ip ro]  [ TOP ]

default via 10.24.53.253 dev eth0 
10.24.53.128/25 dev eth0  proto kernel  scope link  src 10.24.53.135 
127.0.0.0/8 dev lo  scope link 


============= [ip ru]  [ TOP ]

0:	from all lookup local 
32765:	from 10.24.53.135 lookup 1 
32766:	from all lookup main 
32767:	from all lookup default 


============= [ip li]  [ TOP ]

1: lo:  mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth1:  mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 00:08:9b:ec:75:c8 brd ff:ff:ff:ff:ff:ff
3: eth0:  mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:08:9b:ec:75:c7 brd ff:ff:ff:ff:ff:ff
4: bond0:  mtu 1500 qdisc noop state DOWN 
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff


============= [route table]  [ TOP ]

route table 0:
default via 10.24.53.253 dev eth0  table 1 
10.24.53.128/25 dev eth0  table 1  scope link 
default via 10.24.53.253 dev eth0 
10.24.53.128/25 dev eth0  proto kernel  scope link  src 10.24.53.135 
127.0.0.0/8 dev lo  scope link 
broadcast 10.24.53.128 dev eth0  table local  proto kernel  scope link  src 10.24.53.135 
local 10.24.53.135 dev eth0  table local  proto kernel  scope host  src 10.24.53.135 
broadcast 10.24.53.255 dev eth0  table local  proto kernel  scope link  src 10.24.53.135 
broadcast 127.0.0.0 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
local 127.0.0.0/8 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
local 127.0.0.1 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
broadcast 127.255.255.255 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
unreachable default dev lo  table 0  proto kernel  metric -1  error -101 mtu 16436 hoplimit 255
unreachable default dev lo  table 0  proto kernel  metric -1  error -101 mtu 16436 hoplimit 255

route table 32765:

route table 32766:

route table 32767:



============= [ip -6 ro]  [ TOP ]



============= [ip -6 ru]  [ TOP ]

0:	from all lookup local 
32766:	from all lookup main 


============= [ip -6 li]  [ TOP ]

1: lo:  mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth1:  mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 00:08:9b:ec:75:c8 brd ff:ff:ff:ff:ff:ff
3: eth0:  mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:08:9b:ec:75:c7 brd ff:ff:ff:ff:ff:ff
4: bond0:  mtu 1500 qdisc noop state DOWN 
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff


============= [route table ip -6]  [ TOP ]

route table 0:
unreachable default dev lo  table 0  proto kernel  metric -1  error -101 mtu 16436 hoplimit 255
unreachable default dev lo  table 0  proto kernel  metric -1  error -101 mtu 16436 hoplimit 255

route table 32766:



============= [pstore log]  [ TOP ]

/sys/fs/pstore
/mnt/HDA_ROOT/.logs/


============= [ /sys/class/scsi_generic/sg? ]  [ TOP ]
lrwxrwxrwx    1 admin    administ         0 Apr 28 09:30 /sys/class/scsi_generic/sg0 -> ../../devices/pci0000:00/0000:00:00.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0
lrwxrwxrwx    1 admin    administ         0 Apr 28 09:30 /sys/class/scsi_generic/sg1 -> ../../devices/pci0000:00/0000:00:00.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1


============= [ qnapups@localhost ]  [ TOP ]
Error: Connection failure: Connection refused


============= [ hal_app --se_sys_scan ]  [ TOP ]
ENCLOSURE_SCAN *********************************
enc_sys_id[0] = root
enc_sys_id[1] = root_boot
enc_sys_id[2] = root_usb
enc_sys_id[3] = root_esata
ENCLOSURE_SCAN END******************************


============= [ dmidecode -s bios-version ]  [ TOP ]
/mnt/ext/opt/qdesk/www/data/script/get_log: line 1215: /sbin/dmidecode: No such file or directory


============= [ hal_app --get_ec_version ]  [ TOP ]


============= [ iwlist wlan0 scan ]  [ TOP ]
wlan0     Interface doesn't support scanning.



============= [ QLICENSE LOG ]  [ TOP ]

/etc/config/qlicense - NOT FOUND
/etc/logs/qlicense - NOT FOUND
/tmp/.qlicense - NOT FOUND
/tmp/.qlicense_daemon.log


============= [ SSL Log ]  [ TOP ]

/etc/logs/QcloudSSLCertificate/log/


============= [ CloudLink Log ]  [ TOP ]

/tmp/.tunnel_agent.log
/tmp/.eagent.log